EXPRESSWELD®

Welding Machines

Stick Electrode Welding Machines

GTA (TIG) Welding Machines

GMA (MIG/MAG) Welding Machines

Plasma Cutting Machines

Stick Electrode Welding Machines

GTA (TIG) Welding Machines

GMA (MIG/MAG) Welding Machines

Plasma Cutting Machines

Registered Trademark

2

Index

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.

Welding Machines - Plasma Cutting Machines - Welding Helmet - Welding Spray

MMA Welding Machines Welding Current Page

Expressweld Inverter 140E 135A (Inverter Technology) 268

Expressweld Inverter 151-Ultra PFC 150 A (Inverter and PFC Technology) 270

Expressweld Inverter 160E 155 A (Inverter Technology) 272

Expressweld Inverter 161-Ultra 160 A (Inverter Technology) 274

Expressweld Inverter 175-Ultra PFC 170 A (Inverter and PFC Technology) 276

Expressweld Inverter 200E 180 A (Inverter Technology) 278

Expressweld Inverter 201-Ultra PFC 200 A (Inverter and PFC Technology) 280

Expressweld Inverter 251-Ultra 250 A (Inverter Technology) 282

Expressweld Inverter 255-Ultra 250 A (Inverter Technology) 284

Expressweld Inverter 405-Ultra 400 A (Inverter Technology) 286

GTA (TIG) Welding Machines Welding Current Page

Expressweld Inverter 201-TIG PFC 250 A (Inverter and PFC Technology) 288

GMA (MIG/MAG) Welding Machines Welding Current Page

Expressweld MasterMIG 250CT 250 A (Compact) 290

Expressweld MasterMIG 350 350 A (Power Source and Separable Wire Feeder) 292

Expressweld MasterMIG 420W 420 A (Power Source and Separable Wire Feeder) 294

Expressweld MasterMIG 501W 500 A (Power Source and Separable Wire Feeder) 296

Plasma Cutting Machines Cutting Thickness Page

Expressweld Inverter Plasma 60-Ultra 20 mm (Inverter Technology) 298

3

Registered Trademark

2

Index

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance. Fumes: Consult information on Welding Safety Sheet, available upon request.

Welding Machines - Plasma Cutting Machines - Welding Helmet - Welding Spray

MMA Welding Machines Welding Current Page

Expressweld Inverter 140E 135A (Inverter Technology) 268

Expressweld Inverter 151-Ultra PFC 150 A (Inverter and PFC Technology) 270

Expressweld Inverter 160E 155 A (Inverter Technology) 272

Expressweld Inverter 161-Ultra 160 A (Inverter Technology) 274

Expressweld Inverter 175-Ultra PFC 170 A (Inverter and PFC Technology) 276

Expressweld Inverter 200E 180 A (Inverter Technology) 278

Expressweld Inverter 201-Ultra PFC 200 A (Inverter and PFC Technology) 280

Expressweld Inverter 251-Ultra 250 A (Inverter Technology) 282

Expressweld Inverter 255-Ultra 250 A (Inverter Technology) 284

Expressweld Inverter 405-Ultra 400 A (Inverter Technology) 286

GTA (TIG) Welding Machines Welding Current Page

Expressweld Inverter 201-TIG PFC 250 A (Inverter and PFC Technology) 288

GMA (MIG/MAG) Welding Machines Welding Current Page

Expressweld MasterMIG 250CT 250 A (Compact) 290

Expressweld MasterMIG 350 350 A (Power Source and Separable Wire Feeder) 292

Expressweld MasterMIG 420W 420 A (Power Source and Separable Wire Feeder) 294

Expressweld MasterMIG 501W 500 A (Power Source and Separable Wire Feeder) 296

Plasma Cutting Machines Cutting Thickness Page

Expressweld Inverter Plasma 60-Ultra 20 mm (Inverter Technology) 298

3

ExpressweldExpressweld

MMA Welding Machine

Inverter 140E

Digital Inverter Technology - Current Range: 30-140 A

Suitable for wide variety of welding applications both on outside and indoor by providing maximum flexibility.

Excellent welding performance with rutile and basic coated electrodes between 2.5 - 3.2 mm diameters.

Ideal for welding of carbon and low-alloy steels, even stainless steels.

Capable to operate at every single low voltage system where the input voltage is 220 V and can supply 140 A.

Inverter technology makes the machine portable and lightweight (only 5.8 kg), gives an excellent arc characteristics and ensures energy efficiency comparing to transformer type welding machines.

Equipped with thermal and low voltage protection which improves the reliability.

Easy-to-use and user-friendly control panel.

Fan cooling system.

Recessed controls and connections designed to protect front and rear panels from damage.

Easy welding cable connections with European type quick connectors.

IP21S protection class against water, solid objects and access to hazardous parts by finger.

Two years limited spare parts warranty.

FEATURES and ADVANTAGES

Welding Procedure

Manual Metal Arc Welding

Warranty and Properties

2 Years Warranty

1Phase2.5 - 3.2 mm220V - 1Ph

4

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

MMA Welding MachineDigital Inverter Technology - Current Range: 30-140 A

TECHNICAL PROPERTIES

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

1 - Handle

2 - Power indicator light

3 - Thermal protection indicator light

4 - Positive (+) output terminal

5 - Welding current control knob

6 - Negative (–) output terminal

7 - Power cable

8 - On/Off switch

1

2

3

4

5

6

7

8

EXPRESSWELD Inverter 140E

Input voltage 220 V ; 1~Ph ; 50/60 Hz

Power input @ rated output 6.0 kVA (20%)

Input current (max.) 32.0 A (25%)

Effective current (max.) 20.0 A

Power factor (cos j) 0.65 (20%)

Rated output current, 140 A ; 25.6 V (20%)voltage and duty cycle 75 A ; 23.0 V (60%)

Open circuit voltage 68 V (DC)

Current range 30 - 140 A

Fuse size and type 16 A (retarded)

Protection class IP21S

Cooling system Fan cooling

Weight (without cables) 5.8 kg

Dimensions (WxHxD) 150 x 290 x 380 mm

5268

ExpressweldExpressweld

MMA Welding Machine

Inverter 140E

Digital Inverter Technology - Current Range: 30-140 A

Suitable for wide variety of welding applications both on outside and indoor by providing maximum flexibility.

Excellent welding performance with rutile and basic coated electrodes between 2.5 - 3.2 mm diameters.

Ideal for welding of carbon and low-alloy steels, even stainless steels.

Capable to operate at every single low voltage system where the input voltage is 220 V and can supply 140 A.

Inverter technology makes the machine portable and lightweight (only 5.8 kg), gives an excellent arc characteristics and ensures energy efficiency comparing to transformer type welding machines.

Equipped with thermal and low voltage protection which improves the reliability.

Easy-to-use and user-friendly control panel.

Fan cooling system.

Recessed controls and connections designed to protect front and rear panels from damage.

Easy welding cable connections with European type quick connectors.

IP21S protection class against water, solid objects and access to hazardous parts by finger.

Two years limited spare parts warranty.

FEATURES and ADVANTAGES

Welding Procedure

Manual Metal Arc Welding

Warranty and Properties

2 Years Warranty

1Phase2.5 - 3.2 mm220V - 1Ph

4

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

MMA Welding MachineDigital Inverter Technology - Current Range: 30-140 A

TECHNICAL PROPERTIES

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

1 - Handle

2 - Power indicator light

3 - Thermal protection indicator light

4 - Positive (+) output terminal

5 - Welding current control knob

6 - Negative (–) output terminal

7 - Power cable

8 - On/Off switch

1

2

3

4

5

6

7

8

EXPRESSWELD Inverter 140E

Input voltage 220 V ; 1~Ph ; 50/60 Hz

Power input @ rated output 6.0 kVA (20%)

Input current (max.) 32.0 A (25%)

Effective current (max.) 20.0 A

Power factor (cos j) 0.65 (20%)

Rated output current, 140 A ; 25.6 V (20%)voltage and duty cycle 75 A ; 23.0 V (60%)

Open circuit voltage 68 V (DC)

Current range 30 - 140 A

Fuse size and type 16 A (retarded)

Protection class IP21S

Cooling system Fan cooling

Weight (without cables) 5.8 kg

Dimensions (WxHxD) 150 x 290 x 380 mm

5269

ExpressweldExpressweld

MMA Welding Machine

Inverter 151-Ultra PFC

Digital Inverter and PFC Technology - Current Range: 10-140 A

LOWER ELECTRICITY BILL and INFRASTRUCTURE COST

With PFC technology, it reduces energy consumption up to 50% considering the model of conventionel type welding machine and enables usage of energy in high efficiency and high quality.

Digital inverter technology.

Ideal for maintenance-repair and steel installation workshops and small-size welded construction applications.

Excellent arc characteristics and outstanding performance for rutil and basic electrode types.

Ideal for welding of carbon and low-alloy steels, even stainless steels.

220V-1Ph input voltage and maximum output current of 140 A provide a continuous welding operation with electrodes in diameters of 2.5 and 3.2 mm.

Suitable for operation on site or within a workshop environment by providing maximum flexibility.

Weighing only 6.5 kg.

Fan cooling.

Environment-friendly.

Thermostatic overload protection and indicator light.

Easy-to-use and user-friendly control panel.

Recessed controls and connections designed to help protect controls from damage.

Two quarter-turn (positive and negative) output terminals for easy cable connection.

IP21S protection class.

Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.

Two years warranty on parts and labor.

FEATURES and ADVANTAGES

Welding Procedure

Manual Metal Arc Welding

Warranty and Properties

2 Years Warranty

1Phase2.5 - 3.2 mm220V - 1Ph

6

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

MMA Welding MachineDigital Inverter Technology - Current Range: 10-140 A

TECHNICAL PROPERTIES

1 - Handle

2 - Power indicator light

3 - Negative (–) output terminal

4 - Thermal protection indicator light

5 - Welding current control knob

6 - Positive (+) output terminal

7 - On/Off switch

8 - Power cable

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

1

2

3

5

6

7

8

4

EXPRESSWELD Inverter 151-ULTRA PFC

Input voltage 220 V ; 1~Ph ; 50/60 Hz

Power input @ rated output 4.6 kW (25%)

Input current (max.) 21.0 A (25%)

Effective current (max.) 11.0 A

Power factor (cos j) 0.99 (25%)

Rated output current, 140 A ; 25.6 V (25%)voltage and duty cycle 90 A ; 23.6 V (60%)

70 A ; 22.8 V (100%)

Open circuit voltage 50 V (DC)

Current range 10 - 140 A

Fuse size and type 16 A (retarded)

Protection class IP21S

Cooling system Fan cooling

Weight (without cables) 6.5 kg

Dimensions (WxHxD) 135 x 245 x 370 mm

Compliance EN 60974-1 ; EN 60974-10CE

7270

ExpressweldExpressweld

MMA Welding Machine

Inverter 151-Ultra PFC

Digital Inverter and PFC Technology - Current Range: 10-140 A

LOWER ELECTRICITY BILL and INFRASTRUCTURE COST

With PFC technology, it reduces energy consumption up to 50% considering the model of conventionel type welding machine and enables usage of energy in high efficiency and high quality.

Digital inverter technology.

Ideal for maintenance-repair and steel installation workshops and small-size welded construction applications.

Excellent arc characteristics and outstanding performance for rutil and basic electrode types.

Ideal for welding of carbon and low-alloy steels, even stainless steels.

220V-1Ph input voltage and maximum output current of 140 A provide a continuous welding operation with electrodes in diameters of 2.5 and 3.2 mm.

Suitable for operation on site or within a workshop environment by providing maximum flexibility.

Weighing only 6.5 kg.

Fan cooling.

Environment-friendly.

Thermostatic overload protection and indicator light.

Easy-to-use and user-friendly control panel.

Recessed controls and connections designed to help protect controls from damage.

Two quarter-turn (positive and negative) output terminals for easy cable connection.

IP21S protection class.

Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.

Two years warranty on parts and labor.

FEATURES and ADVANTAGES

Welding Procedure

Manual Metal Arc Welding

Warranty and Properties

2 Years Warranty

1Phase2.5 - 3.2 mm220V - 1Ph

6

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

MMA Welding MachineDigital Inverter Technology - Current Range: 10-140 A

TECHNICAL PROPERTIES

1 - Handle

2 - Power indicator light

3 - Negative (–) output terminal

4 - Thermal protection indicator light

5 - Welding current control knob

6 - Positive (+) output terminal

7 - On/Off switch

8 - Power cable

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

1

2

3

5

6

7

8

4

EXPRESSWELD Inverter 151-ULTRA PFC

Input voltage 220 V ; 1~Ph ; 50/60 Hz

Power input @ rated output 4.6 kW (25%)

Input current (max.) 21.0 A (25%)

Effective current (max.) 11.0 A

Power factor (cos j) 0.99 (25%)

Rated output current, 140 A ; 25.6 V (25%)voltage and duty cycle 90 A ; 23.6 V (60%)

70 A ; 22.8 V (100%)

Open circuit voltage 50 V (DC)

Current range 10 - 140 A

Fuse size and type 16 A (retarded)

Protection class IP21S

Cooling system Fan cooling

Weight (without cables) 6.5 kg

Dimensions (WxHxD) 135 x 245 x 370 mm

Compliance EN 60974-1 ; EN 60974-10CE

7271

ExpressweldExpressweld

MMA Welding Machine

Inverter 160E

Digital Inverter Technology - Current Range: 30-160 A

Suitable for wide variety of welding applications both on outside and indoor by providing maximum flexibility.

Excellent welding performance with rutile and basic coated electrodes between 2.5 - 3.2 mm diameters.

Ideal for welding of carbon and low-alloy steels, even stainless steels.

Capable to operate at every single low voltage system where the input voltage is 220 V and can supply 160 A.

Inverter technology makes the machine portable and lightweight (only 6.5 kg), gives an excellent arc characteristics and ensures energy efficiency comparing to transformer type welding machines.

Equipped with thermal and low voltage protection which improves the reliability.

Easy-to-use and user-friendly control panel.

Fan cooling system.

Recessed controls and connections designed to protect front and rear panels from damage.

Easy welding cable connections with European type quick connectors.

IP21S protection class against water, solid objects and access to hazardous parts by finger.

Two years limited spare parts warranty.

FEATURES and ADVANTAGES

Welding Procedure

Manual Metal Arc Welding

Warranty and Properties

2 Years Warranty

1Phase2.5 - 3.2 mm220V - 1Ph

8

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

MMA Welding MachineDigital Inverter Technology - Current Range: 30-160 A

TECHNICAL PROPERTIES

1 - Handle

2 - Power indicator light

3 - Thermal protection indicator light

4 - Positive (+) output terminal

5 - Welding current control knob

6 - Welding mode (MMA/Lift-TIG)selection switch

7 - Negative (–) output terminal

8 - Power cable

9 - On/Off switch

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

1

2

3

4

5

6

7

8

9

EXPRESSWELD Inverter 160E

Input voltage 220 V ; 1~Ph ; 50/60 Hz

Power input @ rated output 6.8 kVA (25%)

Input current (max.) 32.0 A (25%)

Effective current (max.) 20.0 A

Power factor (cos j) 0.69 (25%)

Rated output current, 160 A ; 26.4 V (25%)voltage and duty cycle 110 A ; 24.4 V (60%)

80 A ; 23.2 V (100%)

Open circuit voltage 68 V (DC)

Current range 30 - 160 A

Fuse size and type 16 A (retarded)

Protection class IP21S

Cooling system Fan cooling

Weight (without cables) 6.5 kg

Dimensions (WxHxD) 150 x 290 x 380 mm

9272

ExpressweldExpressweld

MMA Welding Machine

Inverter 160E

Digital Inverter Technology - Current Range: 30-160 A

Suitable for wide variety of welding applications both on outside and indoor by providing maximum flexibility.

Excellent welding performance with rutile and basic coated electrodes between 2.5 - 3.2 mm diameters.

Ideal for welding of carbon and low-alloy steels, even stainless steels.

Capable to operate at every single low voltage system where the input voltage is 220 V and can supply 160 A.

Inverter technology makes the machine portable and lightweight (only 6.5 kg), gives an excellent arc characteristics and ensures energy efficiency comparing to transformer type welding machines.

Equipped with thermal and low voltage protection which improves the reliability.

Easy-to-use and user-friendly control panel.

Fan cooling system.

Recessed controls and connections designed to protect front and rear panels from damage.

Easy welding cable connections with European type quick connectors.

IP21S protection class against water, solid objects and access to hazardous parts by finger.

Two years limited spare parts warranty.

FEATURES and ADVANTAGES

Welding Procedure

Manual Metal Arc Welding

Warranty and Properties

2 Years Warranty

1Phase2.5 - 3.2 mm220V - 1Ph

8

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

MMA Welding MachineDigital Inverter Technology - Current Range: 30-160 A

TECHNICAL PROPERTIES

1 - Handle

2 - Power indicator light

3 - Thermal protection indicator light

4 - Positive (+) output terminal

5 - Welding current control knob

6 - Welding mode (MMA/Lift-TIG)selection switch

7 - Negative (–) output terminal

8 - Power cable

9 - On/Off switch

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

1

2

3

4

5

6

7

8

9

EXPRESSWELD Inverter 160E

Input voltage 220 V ; 1~Ph ; 50/60 Hz

Power input @ rated output 6.8 kVA (25%)

Input current (max.) 32.0 A (25%)

Effective current (max.) 20.0 A

Power factor (cos j) 0.69 (25%)

Rated output current, 160 A ; 26.4 V (25%)voltage and duty cycle 110 A ; 24.4 V (60%)

80 A ; 23.2 V (100%)

Open circuit voltage 68 V (DC)

Current range 30 - 160 A

Fuse size and type 16 A (retarded)

Protection class IP21S

Cooling system Fan cooling

Weight (without cables) 6.5 kg

Dimensions (WxHxD) 150 x 290 x 380 mm

9273

ExpressweldExpressweld

MMA Welding Machine

Inverter 161-Ultra

Digital Inverter Technology - Current Range: 30-160 A

Digital inverter technology.

Ideal for maintenance-repair and steel installation workshops and small-size welded construction applications.

Excellent arc characteristics and outstanding performance for rutil and basic electrode types.

Ideal for welding of carbon and low-alloy steels, even stainless steels.

220V-1Ph input voltage and maximum output current of 160 A provide a continuous welding operation with electrodes in diameters of 2.5 and 3.2 mm.

Suitable for operation on site or within a workshop environment by providing maximum flexibility.

Weighing only 7.3 kg.

Fan cooling.

Thermostatic overload protection and indicator light.

Easy-to-use and user-friendly control panel.

Recessed controls and connections designed to help protect controls from damage.

Two quarter-turn (positive and negative) output terminals for easy cable connection.

IP21S protection class.

Two years warranty on parts and labor.

FEATURES and ADVANTAGES

Welding Procedure

Manual Metal Arc Welding

Warranty and Properties

2 Years Warranty

1Phase2.5 - 3.2 mm220V - 1Ph

10

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

MMA Welding MachineDigital Inverter Technology - Current Range: 30-160 A

TECHNICAL PROPERTIES

1 - Handle

2 - Power indicator light

3 - Negative (–) output terminal

4 - Thermal protection indicator light

5 - Welding current control knob

6 - Positive (+) output terminal

7 - On/Off switch

8 - Power cable

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

1

2

3

5

6

7

8

4

EXPRESSWELD Inverter 161-ULTRA

Input voltage 220 V ; 1~Ph ; 50/60 Hz

Power input @ rated output 5.2 kW (25%)

Input current (max.) 32.0 A (25%)

Effective current (max.) 16.0 A

Power factor (cos j) 0.72 (25%)

Rated output current, 155 A ; 26.2 V (25%)voltage and duty cycle 100 A ; 24.0 V (60%)

80 A ; 23.2 V (100%)

Open circuit voltage 60 V (DC)

Current range 30 - 160 A

Fuse size and type 16 A (retarded)

Protection class IP21S

Cooling system Fan cooling

Weight (without cables) 7.3 kg

Dimensions (WxHxD) 135 x 260 x 365 mm

11274

ExpressweldExpressweld

MMA Welding Machine

Inverter 161-Ultra

Digital Inverter Technology - Current Range: 30-160 A

Digital inverter technology.

Ideal for maintenance-repair and steel installation workshops and small-size welded construction applications.

Excellent arc characteristics and outstanding performance for rutil and basic electrode types.

Ideal for welding of carbon and low-alloy steels, even stainless steels.

220V-1Ph input voltage and maximum output current of 160 A provide a continuous welding operation with electrodes in diameters of 2.5 and 3.2 mm.

Suitable for operation on site or within a workshop environment by providing maximum flexibility.

Weighing only 7.3 kg.

Fan cooling.

Thermostatic overload protection and indicator light.

Easy-to-use and user-friendly control panel.

Recessed controls and connections designed to help protect controls from damage.

Two quarter-turn (positive and negative) output terminals for easy cable connection.

IP21S protection class.

Two years warranty on parts and labor.

FEATURES and ADVANTAGES

Welding Procedure

Manual Metal Arc Welding

Warranty and Properties

2 Years Warranty

1Phase2.5 - 3.2 mm220V - 1Ph

10

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

MMA Welding MachineDigital Inverter Technology - Current Range: 30-160 A

TECHNICAL PROPERTIES

1 - Handle

2 - Power indicator light

3 - Negative (–) output terminal

4 - Thermal protection indicator light

5 - Welding current control knob

6 - Positive (+) output terminal

7 - On/Off switch

8 - Power cable

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

1

2

3

5

6

7

8

4

EXPRESSWELD Inverter 161-ULTRA

Input voltage 220 V ; 1~Ph ; 50/60 Hz

Power input @ rated output 5.2 kW (25%)

Input current (max.) 32.0 A (25%)

Effective current (max.) 16.0 A

Power factor (cos j) 0.72 (25%)

Rated output current, 155 A ; 26.2 V (25%)voltage and duty cycle 100 A ; 24.0 V (60%)

80 A ; 23.2 V (100%)

Open circuit voltage 60 V (DC)

Current range 30 - 160 A

Fuse size and type 16 A (retarded)

Protection class IP21S

Cooling system Fan cooling

Weight (without cables) 7.3 kg

Dimensions (WxHxD) 135 x 260 x 365 mm

11275

ExpressweldExpressweld

MMA Welding Machine

FEATURES and ADVANTAGES

LOWER ELECTRICITY BILL and INFRASTRUCTURE COST

With PFC technology, it reduces energy consumption up to 50% considering the model of conventionel type welding machine and enables usage of energy in high efficiency and high quality.

Digital inverter technology.

Ideal for maintenance-repair and steel installation workshops and small-size welded construction applications.

Excellent arc characteristics and outstanding performance for rutil and basic electrode types.

Ideal for welding of carbon and low-alloy steels, even stainless steels.

220V-1Ph input voltage and maximum output current of 160 A provide a continuous welding operation with electrodes in diameters of 2.5 and 3.2 mm.

Suitable for operation on site or within a workshop environment by providing maximum flexibility.

Weighing only 9.5 kg.

Fan cooling.

Environment-friendly.

Thermostatic overload protection and indicator light.

Easy-to-use and user-friendly control panel.

Recessed controls and connections designed to help protect controls from damage.

Two quarter-turn (positive and negative) output terminals for easy cable connection.IP21S protection class.

Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.

Two years warranty on parts and labor.

Inverter 175-Ultra PFC

Digital Inverter and PFC Technology - Current Range: 30-160 A

Welding Procedure

Manual Metal Arc Welding

Warranty and Properties

2 Years Warranty

220V - 1Ph

1Phase2.5 - 3.2 mm

MMA Welding Machine

TECHNICAL PROPERTIES

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

Digital Inverter and PFC Technology - Current Range: 30-160 A

1 - Handle

2 - Power indicator light

3 - Negative (–) output terminal

4 - Thermal protection indicator light

5 - Welding current control knob

6 - Positive (+) output terminal

7 - On/Off switch

8 - Power cable

1

2

3

5

6

7

8

4

EXPRESSWELD Inverter 175-Ultra PFC

Input voltage 220 V ; 1~Ph ; 50/60 Hz

Power input @ rated output 5.0 kW (20%)

Input current (max.) 23 A (20%)

Effective current (max.) 12 A

Power factor (cos j) 0.99 (20%)

Rated output current, 155 A ; 26.2 V (20%)voltage and duty cycle 90 A ; 23.6 V (60%)

70 A ; 22.8 V (100%)

Open circuit voltage 70 V (DC)

Current range 30 - 160 A

Fuse size and type 16 A (retarded)

Protection class IP21S

Cooling system Fan cooling

Weight (without cables) 9.5 kg

Dimensions (WxHxD) 135 x 245 x 450

Compliance EN 60974-1 ; EN 60974-10CE

276

ExpressweldExpressweld

MMA Welding Machine

FEATURES and ADVANTAGES

LOWER ELECTRICITY BILL and INFRASTRUCTURE COST

With PFC technology, it reduces energy consumption up to 50% considering the model of conventionel type welding machine and enables usage of energy in high efficiency and high quality.

Digital inverter technology.

Ideal for maintenance-repair and steel installation workshops and small-size welded construction applications.

Excellent arc characteristics and outstanding performance for rutil and basic electrode types.

Ideal for welding of carbon and low-alloy steels, even stainless steels.

220V-1Ph input voltage and maximum output current of 160 A provide a continuous welding operation with electrodes in diameters of 2.5 and 3.2 mm.

Suitable for operation on site or within a workshop environment by providing maximum flexibility.

Weighing only 9.5 kg.

Fan cooling.

Environment-friendly.

Thermostatic overload protection and indicator light.

Easy-to-use and user-friendly control panel.

Recessed controls and connections designed to help protect controls from damage.

Two quarter-turn (positive and negative) output terminals for easy cable connection.IP21S protection class.

Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.

Two years warranty on parts and labor.

Inverter 175-Ultra PFC

Digital Inverter and PFC Technology - Current Range: 30-160 A

Welding Procedure

Manual Metal Arc Welding

Warranty and Properties

2 Years Warranty

220V - 1Ph

1Phase2.5 - 3.2 mm

MMA Welding Machine

TECHNICAL PROPERTIES

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

Digital Inverter and PFC Technology - Current Range: 30-160 A

1 - Handle

2 - Power indicator light

3 - Negative (–) output terminal

4 - Thermal protection indicator light

5 - Welding current control knob

6 - Positive (+) output terminal

7 - On/Off switch

8 - Power cable

1

2

3

5

6

7

8

4

EXPRESSWELD Inverter 175-Ultra PFC

Input voltage 220 V ; 1~Ph ; 50/60 Hz

Power input @ rated output 5.0 kW (20%)

Input current (max.) 23 A (20%)

Effective current (max.) 12 A

Power factor (cos j) 0.99 (20%)

Rated output current, 155 A ; 26.2 V (20%)voltage and duty cycle 90 A ; 23.6 V (60%)

70 A ; 22.8 V (100%)

Open circuit voltage 70 V (DC)

Current range 30 - 160 A

Fuse size and type 16 A (retarded)

Protection class IP21S

Cooling system Fan cooling

Weight (without cables) 9.5 kg

Dimensions (WxHxD) 135 x 245 x 450

Compliance EN 60974-1 ; EN 60974-10CE

277

ExpressweldExpressweld

MMA Welding Machine

Inverter 200E

Digital Inverter Technology - Current Range: 30-180 A

Suitable for wide variety of welding applications both on outside and indoor by providing maximum flexibility.

Excellent welding performance with rutile and basic coated electrodes between 2.5 - 4.0 mm diameters.

Ideal for welding of carbon and low-alloy steels, even stainless steels.

Capable to operate at every single low voltage system where the input voltage is 220 V and can supply 180 A.

Inverter technology makes the machine portable and lightweight (only 6.5 kg), gives an excellent arc characteristics and ensures energy efficiency comparing to transformer type welding machines.

Equipped with thermal and low voltage protection which improves the reliability.

Easy-to-use and user-friendly control panel.

Fan cooling system.

Recessed controls and connections designed to protect front and rear panels from damage.

Easy welding cable connections with European type quick connectors.

IP21S protection class against water, solid objects and access to hazardous parts by finger.

Two years limited spare parts warranty.

FEATURES and ADVANTAGES

Welding Procedure

Manual Metal Arc Welding

Warranty and Properties

2 Years Warranty

1Phase2.5 - 4.0 mm220V - 1Ph

14

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

MMA Welding MachineDigital Inverter Technology - Current Range: 30-180 A

TECHNICAL PROPERTIES

1 - Handle

2 - Power indicator light

3 - Thermal protection indicator light

4 - Positive (+) output terminal

5 - Welding current control knob

6 - Welding mode (MMA/Lift-TIG)selection switch

7 - Negative (–) output terminal

8 - Power cable

9 - On/Off switch

1

2

3

4

5

6

7

8

9

EXPRESSWELD Inverter 200E

Input voltage 220 V ; 1~Ph ; 50/60 Hz

Power input @ rated output 8.36 kVA (16%)

Input current (max.) 27.2 A (16%)

23.8 A (60%)

Power factor (cos j) 0.70 (16%)

Rated output current, 180 A ; 27.2 V (16%)voltage and duty cycle 95 A ; 23.8 V (60%)

Open circuit voltage 68 V (DC)

Current range 30 - 180 A

Fuse size and type 16 A (delayed)

Protection class IP21S

Cooling system Fan cooling

Weight (without cables) 6.5 kg

Dimensions (WxHxD) 150 x 290 x 380 mm

15278

ExpressweldExpressweld

MMA Welding Machine

Inverter 200E

Digital Inverter Technology - Current Range: 30-180 A

Suitable for wide variety of welding applications both on outside and indoor by providing maximum flexibility.

Excellent welding performance with rutile and basic coated electrodes between 2.5 - 4.0 mm diameters.

Ideal for welding of carbon and low-alloy steels, even stainless steels.

Capable to operate at every single low voltage system where the input voltage is 220 V and can supply 180 A.

Inverter technology makes the machine portable and lightweight (only 6.5 kg), gives an excellent arc characteristics and ensures energy efficiency comparing to transformer type welding machines.

Equipped with thermal and low voltage protection which improves the reliability.

Easy-to-use and user-friendly control panel.

Fan cooling system.

Recessed controls and connections designed to protect front and rear panels from damage.

Easy welding cable connections with European type quick connectors.

IP21S protection class against water, solid objects and access to hazardous parts by finger.

Two years limited spare parts warranty.

FEATURES and ADVANTAGES

Welding Procedure

Manual Metal Arc Welding

Warranty and Properties

2 Years Warranty

1Phase2.5 - 4.0 mm220V - 1Ph

14

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

MMA Welding MachineDigital Inverter Technology - Current Range: 30-180 A

TECHNICAL PROPERTIES

1 - Handle

2 - Power indicator light

3 - Thermal protection indicator light

4 - Positive (+) output terminal

5 - Welding current control knob

6 - Welding mode (MMA/Lift-TIG)selection switch

7 - Negative (–) output terminal

8 - Power cable

9 - On/Off switch

1

2

3

4

5

6

7

8

9

EXPRESSWELD Inverter 200E

Input voltage 220 V ; 1~Ph ; 50/60 Hz

Power input @ rated output 8.36 kVA (16%)

Input current (max.) 27.2 A (16%)

23.8 A (60%)

Power factor (cos j) 0.70 (16%)

Rated output current, 180 A ; 27.2 V (16%)voltage and duty cycle 95 A ; 23.8 V (60%)

Open circuit voltage 68 V (DC)

Current range 30 - 180 A

Fuse size and type 16 A (delayed)

Protection class IP21S

Cooling system Fan cooling

Weight (without cables) 6.5 kg

Dimensions (WxHxD) 150 x 290 x 380 mm

15279

ExpressweldExpressweld

MMA Welding Machine

FEATURES and ADVANTAGES

LOWER ELECTRICITY BILL and INFRASTRUCTURE COST

With PFC technology, it reduces energy consumption up to 50% considering the model of conventionel type welding machine and enables usage of energy in high efficiency and high quality.

Digital inverter technology.

Ideal for maintenance-repair and steel installation workshops and small-size welded construction applications.

Excellent arc characteristics and outstanding performance for rutil and basic electrode types.

Ideal for welding of carbon and low-alloy steels, even stainless steels.

220V-1Ph input voltage and maximum output current of 200 A provide a continuous welding operation with electrodes in diameters of 2.5 and 4.0 mm.

Suitable for operation on site or within a workshop environment by providing maximum flexibility.

Weighing only 9.5 kg.

Fan cooling.

Environment-friendly.

Thermostatic overload protection and indicator light.

Easy-to-use and user-friendly control panel.

Recessed controls and connections designed to help protect controls from damage.

Two quarter-turn (positive and negative) output terminals for easy cable connection.

IP21S protection class.

Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.

Two years warranty on parts and labor.

Inverter 201-Ultra PFC

Digital Inverter and PFC Technology - Current Range: 10-200 A

Welding Procedure

Manual Metal Arc Welding

Warranty and Properties

2 Years Warranty

2.5 - 4.0 mm220V - 1Ph

1Phase

MMA Welding Machine

TECHNICAL PROPERTIES

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

Digital Inverter and PFC Technology - Current Range: 10-200 A

1 - Handle

2 - Power indicator light

3 - Negative (–) output terminal

4 - Thermal protection indicator light

5 - Welding current control knob

6 - Positive (+) output terminal

7 - On/Off switch

8 - Power cable

1

2

3

5

6

7

8

4

EXPRESSWELD Inverter 201-Ultra PFC

Input voltage 220 V ; 1~Ph ; 50/60 Hz

Power input @ rated output 7.3 kW (20%)

Input current (max.) 33 A (20%)

Effective current (max.) 15 A

Power factor (cos j) 0.99 (20%)

Rated output current, 200 A ; 28.0 V (20%)voltage and duty cycle 115 A ; 24.6 V (60%)

89 A ; 23.6 V (100%)

Open circuit voltage 50 V (DC)

Current range 10 - 200 A

Fuse size and type 16 A (retarded)

Protection class IP21S

Cooling system Fan cooling

Weight (without cables) 9.5 kg

Dimensions (WxHxD) 135 x 245 x 450 mm

Compliance EN 60974-1 ; EN 60974-10CE

280

ExpressweldExpressweld

MMA Welding Machine

FEATURES and ADVANTAGES

LOWER ELECTRICITY BILL and INFRASTRUCTURE COST

With PFC technology, it reduces energy consumption up to 50% considering the model of conventionel type welding machine and enables usage of energy in high efficiency and high quality.

Digital inverter technology.

Ideal for maintenance-repair and steel installation workshops and small-size welded construction applications.

Excellent arc characteristics and outstanding performance for rutil and basic electrode types.

Ideal for welding of carbon and low-alloy steels, even stainless steels.

220V-1Ph input voltage and maximum output current of 200 A provide a continuous welding operation with electrodes in diameters of 2.5 and 4.0 mm.

Suitable for operation on site or within a workshop environment by providing maximum flexibility.

Weighing only 9.5 kg.

Fan cooling.

Environment-friendly.

Thermostatic overload protection and indicator light.

Easy-to-use and user-friendly control panel.

Recessed controls and connections designed to help protect controls from damage.

Two quarter-turn (positive and negative) output terminals for easy cable connection.

IP21S protection class.

Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.

Two years warranty on parts and labor.

Inverter 201-Ultra PFC

Digital Inverter and PFC Technology - Current Range: 10-200 A

Welding Procedure

Manual Metal Arc Welding

Warranty and Properties

2 Years Warranty

2.5 - 4.0 mm220V - 1Ph

1Phase

MMA Welding Machine

TECHNICAL PROPERTIES

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

Digital Inverter and PFC Technology - Current Range: 10-200 A

1 - Handle

2 - Power indicator light

3 - Negative (–) output terminal

4 - Thermal protection indicator light

5 - Welding current control knob

6 - Positive (+) output terminal

7 - On/Off switch

8 - Power cable

1

2

3

5

6

7

8

4

EXPRESSWELD Inverter 201-Ultra PFC

Input voltage 220 V ; 1~Ph ; 50/60 Hz

Power input @ rated output 7.3 kW (20%)

Input current (max.) 33 A (20%)

Effective current (max.) 15 A

Power factor (cos j) 0.99 (20%)

Rated output current, 200 A ; 28.0 V (20%)voltage and duty cycle 115 A ; 24.6 V (60%)

89 A ; 23.6 V (100%)

Open circuit voltage 50 V (DC)

Current range 10 - 200 A

Fuse size and type 16 A (retarded)

Protection class IP21S

Cooling system Fan cooling

Weight (without cables) 9.5 kg

Dimensions (WxHxD) 135 x 245 x 450 mm

Compliance EN 60974-1 ; EN 60974-10CE

281

ExpressweldExpressweld

MMA Welding Machine

FEATURES and ADVANTAGES

Digital Inverter Technology - Current Range: 10-250 A

Digital inverter technology.

Excellent arc characteristics and outstanding performance for rutil and basic electrode types.

Ideal for welding of carbon and low-alloy steels, even stainless steels.

380V-3Ph input voltage and maximum output current of 250 amp provide a continuous welding operation with electrodes in diameters of 2.5 and 4.0 mm.

Hot-Start feature allowing the welder to increase the welding current at the start of the electrode.

Arc-Force to prevent freezing the electrode in the welding puddle.

Suitable for operation on site or within a workshop environment by providing maximum flexibility.

Weighing only 21.5 kg.

Digital ampermeter.

Fan cooling.

Thermostatic overload protection and indicator light.

Easy-to-use and user-friendly control panel.

Recessed controls and connections designed to help protect controls from damage.

Two quarter-turn (positive and negative) output terminals for easy cable connection.

IP21S protection class.

Two years warranty on parts and labor.

Inverter 251-Ultra

Welding Procedure

Manual Metal Arc Welding

Warranty and Properties

2 Years Warranty

2.5 - 4.0 mm380V - 3Ph

3Phase

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

MMA Welding MachineDigital Inverter Technology - Current Range: 10-250 A

TECHNICAL PROPERTIES

1 - Power indicator light

2 - Welding current control knob

3 - Digital ampermeter

4 - Negative (–) output terminal

5 - Positive (+) output terminal

6 - Hot-Start

7 - Arc-Force

8 - Thermal protection indicator light

9 - On/Off switch

10 - Power cable

3

9

4

1

2

5

6

7

8

10

EXPRESSWELD Inverter 251-Ultra

Input voltage 380 V ; 3~Ph ; 50/60 Hz

Power input @ rated output 13.0 kVA (35%)

Input current (max.) 20.0 A (35%)

Effective current (max.) 12.0 A

Rated output current, 250 A ; 30.0 V (35%)voltage and duty cycle 190 A ; 27.6 V (60%)

150 A ; 26.0 V (100%)

Open circuit voltage 80 V (DC)

Current range 10 - 250 A

Fuse size and type 3 x 20 A (retarded)

Protection class IP21S

Cooling system Fan cooling

Weight (without cables) 21.5 kg

Dimensions (WxHxD) 240 x 440 x 500 mm

282

ExpressweldExpressweld

MMA Welding Machine

FEATURES and ADVANTAGES

Digital Inverter Technology - Current Range: 10-250 A

Digital inverter technology.

Excellent arc characteristics and outstanding performance for rutil and basic electrode types.

Ideal for welding of carbon and low-alloy steels, even stainless steels.

380V-3Ph input voltage and maximum output current of 250 amp provide a continuous welding operation with electrodes in diameters of 2.5 and 4.0 mm.

Hot-Start feature allowing the welder to increase the welding current at the start of the electrode.

Arc-Force to prevent freezing the electrode in the welding puddle.

Suitable for operation on site or within a workshop environment by providing maximum flexibility.

Weighing only 21.5 kg.

Digital ampermeter.

Fan cooling.

Thermostatic overload protection and indicator light.

Easy-to-use and user-friendly control panel.

Recessed controls and connections designed to help protect controls from damage.

Two quarter-turn (positive and negative) output terminals for easy cable connection.

IP21S protection class.

Two years warranty on parts and labor.

Inverter 251-Ultra

Welding Procedure

Manual Metal Arc Welding

Warranty and Properties

2 Years Warranty

2.5 - 4.0 mm380V - 3Ph

3Phase

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

MMA Welding MachineDigital Inverter Technology - Current Range: 10-250 A

TECHNICAL PROPERTIES

1 - Power indicator light

2 - Welding current control knob

3 - Digital ampermeter

4 - Negative (–) output terminal

5 - Positive (+) output terminal

6 - Hot-Start

7 - Arc-Force

8 - Thermal protection indicator light

9 - On/Off switch

10 - Power cable

3

9

4

1

2

5

6

7

8

10

EXPRESSWELD Inverter 251-Ultra

Input voltage 380 V ; 3~Ph ; 50/60 Hz

Power input @ rated output 13.0 kVA (35%)

Input current (max.) 20.0 A (35%)

Effective current (max.) 12.0 A

Rated output current, 250 A ; 30.0 V (35%)voltage and duty cycle 190 A ; 27.6 V (60%)

150 A ; 26.0 V (100%)

Open circuit voltage 80 V (DC)

Current range 10 - 250 A

Fuse size and type 3 x 20 A (retarded)

Protection class IP21S

Cooling system Fan cooling

Weight (without cables) 21.5 kg

Dimensions (WxHxD) 240 x 440 x 500 mm

283

ExpressweldExpressweld

MMA Welding Machine

FEATURES and ADVANTAGES

Digital Inverter Technology - Current Range: 30-250 A

LOWER ELECTRICITY BILL and INFRASTRUCTURE COST

Special design that reduces the harmonic currents ensures high power quality, efficiency and lower power consumption.

Provides 20-50% energy saving compared to conventional machines.

Digital inverter technology. Excellent arc characteristics and outstanding performance for rutil and basic electrode types. Ideal for welding of carbon and low-alloy steels, even stainless steels.

380-400V-3Ph input voltage and maximum output current of 250 amp provide a continuous welding operation with electrodes in diameters of 2.5 and 5.0 mm.

Hot-Start feature allowing the welder to increase the welding current at the start of the electrode (smooth start).

Arc-Force to prevent sticking of the electrode to the weld pool.

Generator compatible.*

Suitable to use with long cables with the aid of voltage protection function.

Designed to operate in heavy environmental conditions by providing maximum flexibility.

Weighing only 10.2 kg.

Digital ampermeter.

Fan cooling.

Thermostatic overload protection and indicator light.

User-friendly control panel, recessed controls and connections designed to help protect controls from damage.

IP21S protection class.

Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.

Two years warranty on parts and labor.

Inverter 255-Ultra

Welding Procedure

Manual Metal Arc Welding

Warranty and Properties

2 Years Warranty

3Phase

3Phase

(*)

2.5 - 5.0 mm380V - 400V3Ph

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

MMA Welding MachineDigital Inverter Technology - Current Range: 30-250 A

TECHNICAL PROPERTIES

1 - Handle

2 - Digital ampermeter

3 - Hot-Start

4 - Arc-Force

5 - Negative (–) output terminal

6 - Positive (+) output terminalt

7 - Welding current control knob

8 - Thermal protection indicator light

9 - Power indicator light

3

4

5

1

2

7

8

9

6

EXPRESSWELD Inverter 255-Ultra

Input voltage 380-400 V ; 3~Ph ; 50/60 Hz

Power input @ rated output 9.5 kVA (30%)

Input current (max.) 14.5 A (30%)

Effective current (max.) 8 A

Power factor (cos j) 0.96 (30%)

Rated output current, 250 A ; 30.0 V (30%)voltage and duty cycle 180 A ; 27.2 V (60%)

150 A ; 26.0 V (100%)

Open circuit voltage 47 V (DC)

Current range 30 - 250 A

Fuse size and type 3 x 20 A (retarded)

Protection class IP21S

Cooling system Fan cooling

Weight (without cables) 10.2 kg

Dimensions (WxHxD) 165 x 280 x 440 mm

Compliance EN 60974-1 ; EN 60974-10 CE

284

ExpressweldExpressweld

MMA Welding Machine

FEATURES and ADVANTAGES

Digital Inverter Technology - Current Range: 30-250 A

LOWER ELECTRICITY BILL and INFRASTRUCTURE COST

Special design that reduces the harmonic currents ensures high power quality, efficiency and lower power consumption.

Provides 20-50% energy saving compared to conventional machines.

Digital inverter technology. Excellent arc characteristics and outstanding performance for rutil and basic electrode types. Ideal for welding of carbon and low-alloy steels, even stainless steels.

380-400V-3Ph input voltage and maximum output current of 250 amp provide a continuous welding operation with electrodes in diameters of 2.5 and 5.0 mm.

Hot-Start feature allowing the welder to increase the welding current at the start of the electrode (smooth start).

Arc-Force to prevent sticking of the electrode to the weld pool.

Generator compatible.*

Suitable to use with long cables with the aid of voltage protection function.

Designed to operate in heavy environmental conditions by providing maximum flexibility.

Weighing only 10.2 kg.

Digital ampermeter.

Fan cooling.

Thermostatic overload protection and indicator light.

User-friendly control panel, recessed controls and connections designed to help protect controls from damage.

IP21S protection class.

Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.

Two years warranty on parts and labor.

Inverter 255-Ultra

Welding Procedure

Manual Metal Arc Welding

Warranty and Properties

2 Years Warranty

3Phase

3Phase

(*)

2.5 - 5.0 mm380V - 400V3Ph

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

MMA Welding MachineDigital Inverter Technology - Current Range: 30-250 A

TECHNICAL PROPERTIES

1 - Handle

2 - Digital ampermeter

3 - Hot-Start

4 - Arc-Force

5 - Negative (–) output terminal

6 - Positive (+) output terminalt

7 - Welding current control knob

8 - Thermal protection indicator light

9 - Power indicator light

3

4

5

1

2

7

8

9

6

EXPRESSWELD Inverter 255-Ultra

Input voltage 380-400 V ; 3~Ph ; 50/60 Hz

Power input @ rated output 9.5 kVA (30%)

Input current (max.) 14.5 A (30%)

Effective current (max.) 8 A

Power factor (cos j) 0.96 (30%)

Rated output current, 250 A ; 30.0 V (30%)voltage and duty cycle 180 A ; 27.2 V (60%)

150 A ; 26.0 V (100%)

Open circuit voltage 47 V (DC)

Current range 30 - 250 A

Fuse size and type 3 x 20 A (retarded)

Protection class IP21S

Cooling system Fan cooling

Weight (without cables) 10.2 kg

Dimensions (WxHxD) 165 x 280 x 440 mm

Compliance EN 60974-1 ; EN 60974-10 CE

285

ExpressweldExpressweld

MMA Welding Machine

FEATURES and ADVANTAGES

LOWER ELECTRICITY BILL and INFRASTRUCTURE COST

Special design that reduces the harmonic currents ensures high power quality, efficiency and lower power consumption.

Provides 20-50% energy saving compared to conventional machines

Digital inverter technology. Excellent arc characteristics and outstanding performance for rutil and basic electrode types. Ideal for welding of carbon and low-alloy steels, even stainless steels.

380-400V-3Ph input voltage and maximum output current of 400 A provide a continuous welding operation with electrodes in diameters of 2.5 and 5.0 mm.

Hot-Start feature allowing the welder to increase the welding current at the start of the electrode (smooth start).

Arc-Force to prevent sticking of the electrode to the weld pool.

Generator compatible.*

Suitable to use with long cables with the aid of voltage protection function Designed to operate in heavy environmental conditions by providing maximum flexibility.

Digital ampermeter.

Fan cooling.

Thermostatic overload protection and indicator light.

User-friendly control panel, recessed controls and connections designed to help protect controls from damage.

IP21S protection class.

Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.

Two years warranty on parts and labor.

Inverter 405-Ultra

Digital Inverter Technology - Current Range: 30-400 A

Welding Procedure

Manual Metal Arc Welding

Warranty and Properties

2 Years Warranty

3Phase

(*)

2.5 - 5.0 mm380V - 400V3Ph

MMA Welding Machine

TECHNICAL PROPERTIES

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

Digital Inverter Technology - Current Range: 30-400 A

3

9

4

1

2

5

6

7

8

10

EXPRESSWELD Inverter 405-Ultra

Input voltage 380-400 V ; 3~Ph ; 50/60 Hz

Power input @ rated output 18.0 kVA (45%)

Input current (max.) 26.0 A (45%)

Effective current (max.) 15.4 A

0.96 (35%)

Rated output current, 400 A ; 36.0 V (45%)voltage and duty cycle 305 A ; 32.2 V (60%)

240 A ; 29.6 V (100%)

Open circuit voltage 50 V (DC)

Current range 30 - 400 A

Fuse size and type 3 x 32 A (retarded)

Protection class IP21S

Cooling system Fan cooling

Weight (without cables) 20.5 kg

Dimensions (WxHxD) 240 x 440 x 540 mm

Compliance EN 60974-1 ; EN 60974-10 CE

1 - Power indicator light

2 - Welding current control knob

3 - Digital ampermeter

4 - Negative (–) output terminal

5 - Positive (+) output terminal

6 - Hot-Start

7 - Arc-Force

8 - Thermal protection indicator light

9 - On/Off switch

10 - Power cable

286

ExpressweldExpressweld

MMA Welding Machine

FEATURES and ADVANTAGES

LOWER ELECTRICITY BILL and INFRASTRUCTURE COST

Special design that reduces the harmonic currents ensures high power quality, efficiency and lower power consumption.

Provides 20-50% energy saving compared to conventional machines

Digital inverter technology. Excellent arc characteristics and outstanding performance for rutil and basic electrode types. Ideal for welding of carbon and low-alloy steels, even stainless steels.

380-400V-3Ph input voltage and maximum output current of 400 A provide a continuous welding operation with electrodes in diameters of 2.5 and 5.0 mm.

Hot-Start feature allowing the welder to increase the welding current at the start of the electrode (smooth start).

Arc-Force to prevent sticking of the electrode to the weld pool.

Generator compatible.*

Suitable to use with long cables with the aid of voltage protection function Designed to operate in heavy environmental conditions by providing maximum flexibility.

Digital ampermeter.

Fan cooling.

Thermostatic overload protection and indicator light.

User-friendly control panel, recessed controls and connections designed to help protect controls from damage.

IP21S protection class.

Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.

Two years warranty on parts and labor.

Inverter 405-Ultra

Digital Inverter Technology - Current Range: 30-400 A

Welding Procedure

Manual Metal Arc Welding

Warranty and Properties

2 Years Warranty

3Phase

(*)

2.5 - 5.0 mm380V - 400V3Ph

MMA Welding Machine

TECHNICAL PROPERTIES

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

Digital Inverter Technology - Current Range: 30-400 A

3

9

4

1

2

5

6

7

8

10

EXPRESSWELD Inverter 405-Ultra

Input voltage 380-400 V ; 3~Ph ; 50/60 Hz

Power input @ rated output 18.0 kVA (45%)

Input current (max.) 26.0 A (45%)

Effective current (max.) 15.4 A

0.96 (35%)

Rated output current, 400 A ; 36.0 V (45%)voltage and duty cycle 305 A ; 32.2 V (60%)

240 A ; 29.6 V (100%)

Open circuit voltage 50 V (DC)

Current range 30 - 400 A

Fuse size and type 3 x 32 A (retarded)

Protection class IP21S

Cooling system Fan cooling

Weight (without cables) 20.5 kg

Dimensions (WxHxD) 240 x 440 x 540 mm

Compliance EN 60974-1 ; EN 60974-10 CE

1 - Power indicator light

2 - Welding current control knob

3 - Digital ampermeter

4 - Negative (–) output terminal

5 - Positive (+) output terminal

6 - Hot-Start

7 - Arc-Force

8 - Thermal protection indicator light

9 - On/Off switch

10 - Power cable

287

ExpressweldExpressweldFEATURES and ADVANTAGES

(GTA) TIG Welding Machine

LOWER ELECTRICITY BILL and INFRASTRUCTURE COST

With PFC technology, it reduces energy consumption up to 50% considering the model of conventionel type welding machine and enables usage of energy in high efficiency and high quality.

Digital inverter technology.

Premium arc characteristics, outstanding arc stability and performance both in TIG and MMA welding applications with rutile and basic coated electrode types.

Excellent high frequency TIG ignition helps to a perfect arc start.

220V-1Ph input voltage and maximum output current of 200 A provide a continuous welding operation with electrodes in diameters of 2.5 and 4.0 mm.

Suitable for maintenance-repair and steel installation workshops and medium-size welded construction applications by providing maximum flexibility.

Ideal for welding of carbon and low-alloy steels, even stainless steels.

Weighing only 12.5 kg.

Thermostatic overload protection and indicator light.

Easy-to-use and user-friendly control panel.

Recessed controls and connections designed to help protect controls from damage.

Two quarter-turn (positive and negative) output terminals for easy cable connection.

Fan cooling.

Environment-friendly.

IP21S protection class.

Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.

Two years warranty on parts and labor.

Inverter 201-TIG PFC

Digital Inverter and PFC Technology - Current Range: 7-200 A

Welding Procedure

Manual Metal Arc Welding

Warranty and Properties

2 Years Warranty

220V - 1Ph

1Phase2.5 - 4.0 mm

TECHNICAL PROPERTIES

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

(GTA) TIG Welding MachineDigital Inverter and PFC Technology - Current Range: 7-200 A

1

3

4

6

5

9

7

10

8

112

1 - Handle

2 - Thermal protection indicator light

3 - Power indicator light

4 - Welding current control knob

5 - Gas hose connector

6 - Negative (–) output terminal

7 - Positive (+) output terminal

8 - TIG torch connection socket

9 - Arc Force (MMA)Down-Slop (TIG)

10 - Welding mode (TIG/MMA)selection switch

11 - HF-TIG and Lift-TIG selection switch

EXPRESSWELD Inverter 201-TIG PFC

Input voltage 220 V ; 1~Ph ; 50/60 Hz

Power input @ rated output 7.0 kW (20%)

Input current (max.) 31 A (20%)

Effective current (max.) 14 A

Power factor (cos j) 0.99 (20%)

Rated output current, 200 A ; 18.0 V (20%)voltage and duty cycle (TIG) 115 A ; 14.6 V (60%)

80 A ; 13.2 V (100%)

Rated output current, 200 A ; 28.0 V (20%)voltage and duty cycle (MMA) 115 A ; 24.6 V (60%)

80 A ; 23.2 V (100%)

Open circuit voltage 72 V (DC)

Current range 7 - 200 A (TIG)

10 - 200 A (MMA)

Fuse size and type 16 A (retarded)

Protection class IP21S

Cooling system Fan cooling

Weight (without cables) 12.5 kg

Dimensions (WxHxD) 155 x 275 x 480 mm

Compliance EN 60974-1 ; EN 60974-10CE

288

ExpressweldExpressweldFEATURES and ADVANTAGES

(GTA) TIG Welding Machine

LOWER ELECTRICITY BILL and INFRASTRUCTURE COST

With PFC technology, it reduces energy consumption up to 50% considering the model of conventionel type welding machine and enables usage of energy in high efficiency and high quality.

Digital inverter technology.

Premium arc characteristics, outstanding arc stability and performance both in TIG and MMA welding applications with rutile and basic coated electrode types.

Excellent high frequency TIG ignition helps to a perfect arc start.

220V-1Ph input voltage and maximum output current of 200 A provide a continuous welding operation with electrodes in diameters of 2.5 and 4.0 mm.

Suitable for maintenance-repair and steel installation workshops and medium-size welded construction applications by providing maximum flexibility.

Ideal for welding of carbon and low-alloy steels, even stainless steels.

Weighing only 12.5 kg.

Thermostatic overload protection and indicator light.

Easy-to-use and user-friendly control panel.

Recessed controls and connections designed to help protect controls from damage.

Two quarter-turn (positive and negative) output terminals for easy cable connection.

Fan cooling.

Environment-friendly.

IP21S protection class.

Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.

Two years warranty on parts and labor.

Inverter 201-TIG PFC

Digital Inverter and PFC Technology - Current Range: 7-200 A

Welding Procedure

Manual Metal Arc Welding

Warranty and Properties

2 Years Warranty

220V - 1Ph

1Phase2.5 - 4.0 mm

TECHNICAL PROPERTIES

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

(GTA) TIG Welding MachineDigital Inverter and PFC Technology - Current Range: 7-200 A

1

3

4

6

5

9

7

10

8

112

1 - Handle

2 - Thermal protection indicator light

3 - Power indicator light

4 - Welding current control knob

5 - Gas hose connector

6 - Negative (–) output terminal

7 - Positive (+) output terminal

8 - TIG torch connection socket

9 - Arc Force (MMA)Down-Slop (TIG)

10 - Welding mode (TIG/MMA)selection switch

11 - HF-TIG and Lift-TIG selection switch

EXPRESSWELD Inverter 201-TIG PFC

Input voltage 220 V ; 1~Ph ; 50/60 Hz

Power input @ rated output 7.0 kW (20%)

Input current (max.) 31 A (20%)

Effective current (max.) 14 A

Power factor (cos j) 0.99 (20%)

Rated output current, 200 A ; 18.0 V (20%)voltage and duty cycle (TIG) 115 A ; 14.6 V (60%)

80 A ; 13.2 V (100%)

Rated output current, 200 A ; 28.0 V (20%)voltage and duty cycle (MMA) 115 A ; 24.6 V (60%)

80 A ; 23.2 V (100%)

Open circuit voltage 72 V (DC)

Current range 7 - 200 A (TIG)

10 - 200 A (MMA)

Fuse size and type 16 A (retarded)

Protection class IP21S

Cooling system Fan cooling

Weight (without cables) 12.5 kg

Dimensions (WxHxD) 155 x 275 x 480 mm

Compliance EN 60974-1 ; EN 60974-10CE

289

ExpressweldExpressweldFEATURES and ADVANTAGES

GMA Welding MachineCompact Wire Feeder - Current Range: 20-250 A - Gas Cooled

MasterMIG 250C is a compact type semiautomatic GMA (MIG/MAG) welding machine equipped with a large drive roll system.

Especially suitable for spot welding applications and high quality welding of thin materials and light to medium-sized lowcarbon steels and stainless steels widelyused in metal manufacturing industry.

Excellent arc caracteristics, sound weld beads and low spatter with 100% CO2 gas shielding.

20 steps (2x10) welding voltage so as to adjust welding parameters conveniently.

Adjustable wire feed speed.

Equipped with thermal overload protection circuit.

Weighing only 100 kg.

Gas cooled.

Easy to use, highly reliable.

IP21S protection class.

Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.

Two years warranty. (welding torch and cables excepted)

MasterMIG 250CT

Welding Procedure

Gas Metal Arc Welding

Warranty and Properties

2 Years Warranty

3Phase

250A

TECHNICAL PROPERTIES

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

GMA Welding MachineCompact Wire Feeder - Current Range: 20-250 A - Gas Cooled

1 - Wire feed speed control switch

2 - Thermal protection indicator

3 - Torch connection (Euro socket)

4 - Front wheels (mobile)

5 - Rear wheels (fixed)

6 - Work cable connection

7 - Welding voltage switch (course setting)

8 - Welding voltage switch (fine setting)

9 - On/Off switch

10 - Handle

11 - Power indicator

11

5

6

7

8

10

91

2

3

4

POWER SUPPLY MasterMIG 250CT

Input voltage 380 V ; 3~Ph ; 50 Hz

Power input @ rated output 9.0 kW (35%)

Input current (max) 15.2 A (35%)

7,3 A (100%)

Effective current (max.) 9.3 A

Power factor (cos j) 0.93 (min)

Efficiency 73% (min)

0,96 (35%)

Rated output current, 250 A ; 26.5 V (35%)voltage and duty cycle 148 A ; 21.4 V (100%)

Open circuit voltage range 15 - 36 V

Current range 20 - 250 A

Fuse size and type 3 x 20 A (retarded)

Voltage range 15 - 26.5 V

Number of steps (voltage) 20 (2x10)

Protection class IP21S

Weight 100 kg

Dimensions (WxHxD) 490 x 765 x 905 mm

Compliance EN 60974-1 ; EN 60974-10CE

WIRE FEEDER Compact

Wire feed speed range (vn) 1 - 20 m/min

Wire size Solid wire -V- 0.8 - 1.0 mm

Compliance EN 60974-5 ; EN 60974-10CE

290

ExpressweldExpressweldFEATURES and ADVANTAGES

GMA Welding MachineCompact Wire Feeder - Current Range: 20-250 A - Gas Cooled

MasterMIG 250C is a compact type semiautomatic GMA (MIG/MAG) welding machine equipped with a large drive roll system.

Especially suitable for spot welding applications and high quality welding of thin materials and light to medium-sized lowcarbon steels and stainless steels widelyused in metal manufacturing industry.

Excellent arc caracteristics, sound weld beads and low spatter with 100% CO2 gas shielding.

20 steps (2x10) welding voltage so as to adjust welding parameters conveniently.

Adjustable wire feed speed.

Equipped with thermal overload protection circuit.

Weighing only 100 kg.

Gas cooled.

Easy to use, highly reliable.

IP21S protection class.

Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.

Two years warranty. (welding torch and cables excepted)

MasterMIG 250CT

Welding Procedure

Gas Metal Arc Welding

Warranty and Properties

2 Years Warranty

3Phase

250A

TECHNICAL PROPERTIES

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

GMA Welding MachineCompact Wire Feeder - Current Range: 20-250 A - Gas Cooled

1 - Wire feed speed control switch

2 - Thermal protection indicator

3 - Torch connection (Euro socket)

4 - Front wheels (mobile)

5 - Rear wheels (fixed)

6 - Work cable connection

7 - Welding voltage switch (course setting)

8 - Welding voltage switch (fine setting)

9 - On/Off switch

10 - Handle

11 - Power indicator

11

5

6

7

8

10

91

2

3

4

POWER SUPPLY MasterMIG 250CT

Input voltage 380 V ; 3~Ph ; 50 Hz

Power input @ rated output 9.0 kW (35%)

Input current (max) 15.2 A (35%)

7,3 A (100%)

Effective current (max.) 9.3 A

Power factor (cos j) 0.93 (min)

Efficiency 73% (min)

0,96 (35%)

Rated output current, 250 A ; 26.5 V (35%)voltage and duty cycle 148 A ; 21.4 V (100%)

Open circuit voltage range 15 - 36 V

Current range 20 - 250 A

Fuse size and type 3 x 20 A (retarded)

Voltage range 15 - 26.5 V

Number of steps (voltage) 20 (2x10)

Protection class IP21S

Weight 100 kg

Dimensions (WxHxD) 490 x 765 x 905 mm

Compliance EN 60974-1 ; EN 60974-10CE

WIRE FEEDER Compact

Wire feed speed range (vn) 1 - 20 m/min

Wire size Solid wire -V- 0.8 - 1.0 mm

Compliance EN 60974-5 ; EN 60974-10CE

291

ExpressweldExpressweldFEATURES and ADVANTAGES

MasterMIG 350 is a semi-automatic GMA (MIG/MAG) welding machine with separate and 4 drive rolls wire feeder which provides to work easily in areas distant from the power supply.

Suitable for high quality welding of constructional low-carbon steels, stainless steels, aluminum and their alloys.

Excellent arc caracteristics, sound weld beads and low spatter with 100% CO2 gas shielding.

30 steps (3x10) welding voltage so as to adjust welding parameters conveniently.

Adjustable wire feed speed.

2/4 trigger mode selection option.

Wire feed slow run (soft-arc) control function enables easier arc generation.

Equipped with thermal overload protection circuit.

Burnback time adjustment, gas flow (gas purge) control, cold wire inching functions.

Equipped with two digital meters to indicate welding current and welding voltage.

Gas cooled.

Easy to use, highly reliable.

IP21S protection class.

Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.

Two years warranty. (welding torch and cables excepted not included)

GMA Welding MachineSeparable Wire Feeder - Current Range: 60-360 A - Gas Cooled

MasterMIG 350

Welding Procedure

Gas Metal Arc Welding

Warranty and Properties

2 Years Warranty

3Phase

60%350A

TECHNICAL PROPERTIES

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

Separable Wire Feeder - Current Range: 60-360 A - Gas Cooled

GMA Welding Machine

1 - Welding wire cartridge

2 - Gas test (gas purge)

3 - Torch connection (Euro socket)

4 - Welding voltage digital display

5 - Welding current digital display

6 - Work cable connection with low induction

7 - Work cable connection with high induction

8 - Welding voltage switch (course setting)

9 - Welding voltage switch (fine setting)

10 - Thermal protection indicator

11 - On/Off switch

12 - Power indicator

13 - Wire feed speed control

14 - Cold wire inch

15 - 2/4 torch mode switch (2/4 stroke)

8

9

10

11

12

13

14

15

1

2

3

5

4

6 7

(*) it requires to use teflon spiral and “U” groove drive rolls

POWER SUPPLY MasterMIG 350

Input voltage 380 V ; 3~Ph ; 50 Hz

Power input @ rated output 15.1 kVA (60%)

Input current (max.) 23.0 A (60%)

Effective current (max.) 17.8 A

Power factor (cos j) 0.95 (60%)

Efficiency 75%

Rated output current, 350 A ; 31.5 V (60%)voltage and duty cycle 270 A ; 27.5 V (100%)

Open circuit voltage range 19 - 40 V

Current range 60 - 360 A

Voltage range 17 - 32 V

Number of steps (voltage) 30 (3x10)

Protection class IP21S

Insulation class F+H

Weight (without wire feeder) 136 kg

Dimensions (WxHxD) 570 x 835 x 960 mm

Compliance EN 60974-1 ; EN 60974-10CE

WIRE FEEDER MF-3

Wire feed speed range (vn) 1 - 24 m/dak

Soft-arc start speed range % 10 - 100 (vn)

Wire size Solid wire -V- 0.8 - 1.0 - 1.2 mm

Flux-cored wire -V knurled- 1.2 mm

Aluminium wire -U- (*) 1.2 mm

Input voltage and power input 42 V ; 90 W

Max. input current 4 A

Protection class IP21

Weight (without torch and cables) 19 kg

Dimensions (WxHxD) 290 x 440 x 675 mm

Compliance EN 60974-5 ; EN 60974-10CE

292

ExpressweldExpressweldFEATURES and ADVANTAGES

MasterMIG 350 is a semi-automatic GMA (MIG/MAG) welding machine with separate and 4 drive rolls wire feeder which provides to work easily in areas distant from the power supply.

Suitable for high quality welding of constructional low-carbon steels, stainless steels, aluminum and their alloys.

Excellent arc caracteristics, sound weld beads and low spatter with 100% CO2 gas shielding.

30 steps (3x10) welding voltage so as to adjust welding parameters conveniently.

Adjustable wire feed speed.

2/4 trigger mode selection option.

Wire feed slow run (soft-arc) control function enables easier arc generation.

Equipped with thermal overload protection circuit.

Burnback time adjustment, gas flow (gas purge) control, cold wire inching functions.

Equipped with two digital meters to indicate welding current and welding voltage.

Gas cooled.

Easy to use, highly reliable.

IP21S protection class.

Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.

Two years warranty. (welding torch and cables excepted not included)

GMA Welding MachineSeparable Wire Feeder - Current Range: 60-360 A - Gas Cooled

MasterMIG 350

Welding Procedure

Gas Metal Arc Welding

Warranty and Properties

2 Years Warranty

3Phase

60%350A

TECHNICAL PROPERTIES

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

Separable Wire Feeder - Current Range: 60-360 A - Gas Cooled

GMA Welding Machine

1 - Welding wire cartridge

2 - Gas test (gas purge)

3 - Torch connection (Euro socket)

4 - Welding voltage digital display

5 - Welding current digital display

6 - Work cable connection with low induction

7 - Work cable connection with high induction

8 - Welding voltage switch (course setting)

9 - Welding voltage switch (fine setting)

10 - Thermal protection indicator

11 - On/Off switch

12 - Power indicator

13 - Wire feed speed control

14 - Cold wire inch

15 - 2/4 torch mode switch (2/4 stroke)

8

9

10

11

12

13

14

15

1

2

3

5

4

6 7

(*) it requires to use teflon spiral and “U” groove drive rolls

POWER SUPPLY MasterMIG 350

Input voltage 380 V ; 3~Ph ; 50 Hz

Power input @ rated output 15.1 kVA (60%)

Input current (max.) 23.0 A (60%)

Effective current (max.) 17.8 A

Power factor (cos j) 0.95 (60%)

Efficiency 75%

Rated output current, 350 A ; 31.5 V (60%)voltage and duty cycle 270 A ; 27.5 V (100%)

Open circuit voltage range 19 - 40 V

Current range 60 - 360 A

Voltage range 17 - 32 V

Number of steps (voltage) 30 (3x10)

Protection class IP21S

Insulation class F+H

Weight (without wire feeder) 136 kg

Dimensions (WxHxD) 570 x 835 x 960 mm

Compliance EN 60974-1 ; EN 60974-10CE

WIRE FEEDER MF-3

Wire feed speed range (vn) 1 - 24 m/dak

Soft-arc start speed range % 10 - 100 (vn)

Wire size Solid wire -V- 0.8 - 1.0 - 1.2 mm

Flux-cored wire -V knurled- 1.2 mm

Aluminium wire -U- (*) 1.2 mm

Input voltage and power input 42 V ; 90 W

Max. input current 4 A

Protection class IP21

Weight (without torch and cables) 19 kg

Dimensions (WxHxD) 290 x 440 x 675 mm

Compliance EN 60974-5 ; EN 60974-10CE

293

ExpressweldExpressweldFEATURES and ADVANTAGES

MasterMIG 420W is a semi-automatic GMA (MIG/MAG) welding machine with separate and 4 drive rolls wire feeder which provides to work easily in areas distant from the power supply.

Suitable for high quality welding of constructional low-carbon steels and stainless steels.

Excellent arc caracteristics, sound weld beads and low spatter with 100% CO2 gas shielding.

30 steps (3x10) welding voltage so as to adjust welding parameters conveniently.

Adjustable wire feed speed.

2/4 trigger mode selection option.

Wire feed slow run (soft-arc) control function enables easier arc generation.

Equipped with thermal overload protection circuit.

Burnback time adjustment, gas flow (gas purge) control, cold wire inching functions.

Equipped with two digital meters to indicate welding current and welding voltage.

Water cooled.

Easy to use, highly reliable.

IP21S protection class.

Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.

Two years warranty. (welding torch and cables excepted)

GMA Welding MachineSeparable Wire Feeder - Current Range: 60-420 A - Water Cooled

MasterMIG 420W

Welding Procedure

Gas Metal Arc Welding

Warranty and Properties

2 Years Warranty

3Phase420A

TECHNICAL PROPERTIES

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

Separable Wire Feeder - Current Range: 60-420 A - Water Cooled

GMA Welding Machine

1 - Welding wire cartridge

2 - Gas test (gas purge)

3 - Torch connection (Euro socket)

4 - Welding voltage digital display

5 - Welding current digital display

6 - Welding voltage switch (course setting)

7 - Work cable connection with low induction

8 - Work cable connection with high induction

9 - Welding voltage switch (fine setting)

10 - Cooling water indicator

11 - On/Off switch

12 - Power indicator

13 - Thermal protection indicator

14 - Cooling water inlet and outlet sockets

15 - Wire feed speed control

16 - Cold wire inch

17 - 2/4 torch mode switch (2/4 stroke)

8

9

10

11

12

13

14

15

16

17

1

2

3

5

4

6

7

(*) it requires to use teflon spiral and “U” groove drive rolls

POWER SUPPLY MasterMIG 420W

Input voltage 380 V ; 3~Ph ; 50 Hz

Power input @ rated output 21.0 kVA (25%)

Input current (max.) 32.0 A (25%)

14.0 A (100%)

Effective current (max.) 18.0 A

Power factor (cos j) 0.96 (25%)

Efficiency 73%

Rated output current, 420 A ; 35.0 V (30%)voltage and duty cycle 255 A ; 26.8 V (100%)

Open circuit voltage range 18.1 - 46 V

Current range 60 - 420 A

Voltage range 17 - 35 V

Number of steps (voltage) 30 (3x10)

Protection class IP21S

Insulation class H

Fuse size and type 3 x 40 A (retarded)

Weight (without wire feeder) 154 kg (cooling unit emty)

160 kg (cooling unit full)

Dimensions (WxHxD) 600 x 810 x 1030 mm

Compliance IEC 60974-1 ; EC 60974-10CE

WIRE FEEDER MF-4

Wire feed speed range (vn) 1 - 24 m/dak

Soft-arc start speed range % 10 - 100 (vn)

Wire size Solid wire -V- 0.8 - 1.0 - 1.2 mm

Flux-cored wire -V knurled- 1.2 mm

Aluminium wire -U- (*) 1.2 mm

Input voltage and power input 42 V ; 90 W

Max. input current 4 A

Protection class IP21

Weight (without torch and cables) 19 kg

Dimensions (W x H x D) 290 x 440 x 675 mm

Compliance EN 60974-5 ; EN 60974-10CE

294

ExpressweldExpressweldFEATURES and ADVANTAGES

MasterMIG 420W is a semi-automatic GMA (MIG/MAG) welding machine with separate and 4 drive rolls wire feeder which provides to work easily in areas distant from the power supply.

Suitable for high quality welding of constructional low-carbon steels and stainless steels.

Excellent arc caracteristics, sound weld beads and low spatter with 100% CO2 gas shielding.

30 steps (3x10) welding voltage so as to adjust welding parameters conveniently.

Adjustable wire feed speed.

2/4 trigger mode selection option.

Wire feed slow run (soft-arc) control function enables easier arc generation.

Equipped with thermal overload protection circuit.

Burnback time adjustment, gas flow (gas purge) control, cold wire inching functions.

Equipped with two digital meters to indicate welding current and welding voltage.

Water cooled.

Easy to use, highly reliable.

IP21S protection class.

Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.

Two years warranty. (welding torch and cables excepted)

GMA Welding MachineSeparable Wire Feeder - Current Range: 60-420 A - Water Cooled

MasterMIG 420W

Welding Procedure

Gas Metal Arc Welding

Warranty and Properties

2 Years Warranty

3Phase420A

TECHNICAL PROPERTIES

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

Separable Wire Feeder - Current Range: 60-420 A - Water Cooled

GMA Welding Machine

1 - Welding wire cartridge

2 - Gas test (gas purge)

3 - Torch connection (Euro socket)

4 - Welding voltage digital display

5 - Welding current digital display

6 - Welding voltage switch (course setting)

7 - Work cable connection with low induction

8 - Work cable connection with high induction

9 - Welding voltage switch (fine setting)

10 - Cooling water indicator

11 - On/Off switch

12 - Power indicator

13 - Thermal protection indicator

14 - Cooling water inlet and outlet sockets

15 - Wire feed speed control

16 - Cold wire inch

17 - 2/4 torch mode switch (2/4 stroke)

8

9

10

11

12

13

14

15

16

17

1

2

3

5

4

6

7

(*) it requires to use teflon spiral and “U” groove drive rolls

POWER SUPPLY MasterMIG 420W

Input voltage 380 V ; 3~Ph ; 50 Hz

Power input @ rated output 21.0 kVA (25%)

Input current (max.) 32.0 A (25%)

14.0 A (100%)

Effective current (max.) 18.0 A

Power factor (cos j) 0.96 (25%)

Efficiency 73%

Rated output current, 420 A ; 35.0 V (30%)voltage and duty cycle 255 A ; 26.8 V (100%)

Open circuit voltage range 18.1 - 46 V

Current range 60 - 420 A

Voltage range 17 - 35 V

Number of steps (voltage) 30 (3x10)

Protection class IP21S

Insulation class H

Fuse size and type 3 x 40 A (retarded)

Weight (without wire feeder) 154 kg (cooling unit emty)

160 kg (cooling unit full)

Dimensions (WxHxD) 600 x 810 x 1030 mm

Compliance IEC 60974-1 ; EC 60974-10CE

WIRE FEEDER MF-4

Wire feed speed range (vn) 1 - 24 m/dak

Soft-arc start speed range % 10 - 100 (vn)

Wire size Solid wire -V- 0.8 - 1.0 - 1.2 mm

Flux-cored wire -V knurled- 1.2 mm

Aluminium wire -U- (*) 1.2 mm

Input voltage and power input 42 V ; 90 W

Max. input current 4 A

Protection class IP21

Weight (without torch and cables) 19 kg

Dimensions (W x H x D) 290 x 440 x 675 mm

Compliance EN 60974-5 ; EN 60974-10CE

295

ExpressweldExpressweldFEATURES and ADVANTAGES

MasterMIG 501W is a semi-automatic GMA (MIG/MAG) welding machine with separate and 4 drive rolls wire feeder which provides to work easily in areas distant from the power supply.

Suitable for high quality welding of constructional low-carbon steels and stainless steels.

Excellent arc caracteristics, sound weld beads and low spatter with 100% CO2 gas shielding.

30 steps (3x10) welding voltage so as to adjust welding parameters conveniently.

Adjustable wire feed speed.

2/4 trigger mode selection option.

Wire feed slow run (soft-arc) control function enables easier arc generation.

Equipped with thermal overload protection circuit.

Burnback time adjustment, gas flow (gas purge) control, cold wire inching functions.

Equipped with two digital meters to indicate welding current and welding voltage.

Water cooled (optionally gas cooled).

Easy to use, highly reliable.

IP21S protection class.

Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.

Two years warranty. (welding torch and cables excepted)

GMA Welding MachineSeparable Wire Feeder - Current Range: 110-500 A - Water Cooled

MasterMIG 501W

Welding Procedure

Gas Metal Arc Welding

Warranty and Properties

2 Years Warranty

3Phase

60%500A

TECHNICAL PROPERTIES

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

Separable Wire Feeder - Current Range: 110-500 A - Water Cooled

GMA Welding Machine

1 - Welding wire cartridge

2 - Gas test (gas purge)

3 - Torch connection (Euro socket)

4 - Cooling water inlet and outlet sockets

5 - Welding voltage digital display

6 - Welding current digital display

7 - Work cable connection with low-level induction

8 - Work cable connection with mid-level induction

9 - Work cable connection with high-level induction

10 - Welding voltage switch (course setting)

11 - Welding voltage switch (fine setting)

12 - Thermal protection indicator

13 - On/Off switch

14 - Power indicator

15 - Cooling water pump power switch

16 - Wire feed speed control

17 - Cold wire inch

18 - 2/4 torch mode switch (2/4 stroke)

8 9

10

11

12

13

14

15

16

17

171

2

3

5

4

6

7

(*) it requires to use teflon spiral and “U” groove drive rolls

POWER SUPPLY MasterMIG 501W

Input voltage 380 V ; 3~Ph ; 50 Hz

Power input @ rated output 28.3 kVA (60%)

Input current (max.) 43.0 A (60%)

Effective current (max.) 33.0 A

Power factor (cos j) 0.94 (60%)

Efficiency 73.3%

Rated output current, 500 A ; 39.0 V (60%)voltage and duty cycle 387 A ; 33.4 V (100%)

Open circuit voltage range 20 - 51 V

Current range 110 - 500 A

Voltage range 19.5 - 39 V

Number of steps (voltage) 30 (3x10)

Protection class IP21S

Insulation class F+H

Fuse size and type 3 x 40 A (retarded)

Weight (without wire feeder) 220 kg (cooling unit emty)

225 kg (cooling unit full)

Dimensions (WxHxD) 620 x 900 x 930 mm

Compliance IEC 60974-1 ; IEC 60974-10CE

WIRE FEEDER MF-3

Wire feed speed range (vn) 1 - 24 m/min

Soft-arc start speed range % 10 - 100 (v )

Wire size Solid wire -V- 0.8 - 1.0 - 1.2 mm

Flux-cored wire -V knurled- 1.2 - 1.6 mm

Aluminium wire -U- (*) 1.2 mm

Input voltage and power input 42 V ; 90 W

Max. input current 4 A

Protection class IP21

Weight (without torch and cables) 19 kg

Dimensions (W x H x D) 290 x 440 x 675 mm

Compliance IEC 60974-5 ; IEC 60974-10CE

296

ExpressweldExpressweldFEATURES and ADVANTAGES

MasterMIG 501W is a semi-automatic GMA (MIG/MAG) welding machine with separate and 4 drive rolls wire feeder which provides to work easily in areas distant from the power supply.

Suitable for high quality welding of constructional low-carbon steels and stainless steels.

Excellent arc caracteristics, sound weld beads and low spatter with 100% CO2 gas shielding.

30 steps (3x10) welding voltage so as to adjust welding parameters conveniently.

Adjustable wire feed speed.

2/4 trigger mode selection option.

Wire feed slow run (soft-arc) control function enables easier arc generation.

Equipped with thermal overload protection circuit.

Burnback time adjustment, gas flow (gas purge) control, cold wire inching functions.

Equipped with two digital meters to indicate welding current and welding voltage.

Water cooled (optionally gas cooled).

Easy to use, highly reliable.

IP21S protection class.

Meet EN 60974-1, EN 60974-10 and CE standards for safety and reliability.

Two years warranty. (welding torch and cables excepted)

GMA Welding MachineSeparable Wire Feeder - Current Range: 110-500 A - Water Cooled

MasterMIG 501W

Welding Procedure

Gas Metal Arc Welding

Warranty and Properties

2 Years Warranty

3Phase

60%500A

TECHNICAL PROPERTIES

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

Separable Wire Feeder - Current Range: 110-500 A - Water Cooled

GMA Welding Machine

1 - Welding wire cartridge

2 - Gas test (gas purge)

3 - Torch connection (Euro socket)

4 - Cooling water inlet and outlet sockets

5 - Welding voltage digital display

6 - Welding current digital display

7 - Work cable connection with low-level induction

8 - Work cable connection with mid-level induction

9 - Work cable connection with high-level induction

10 - Welding voltage switch (course setting)

11 - Welding voltage switch (fine setting)

12 - Thermal protection indicator

13 - On/Off switch

14 - Power indicator

15 - Cooling water pump power switch

16 - Wire feed speed control

17 - Cold wire inch

18 - 2/4 torch mode switch (2/4 stroke)

8 9

10

11

12

13

14

15

16

17

171

2

3

5

4

6

7

(*) it requires to use teflon spiral and “U” groove drive rolls

POWER SUPPLY MasterMIG 501W

Input voltage 380 V ; 3~Ph ; 50 Hz

Power input @ rated output 28.3 kVA (60%)

Input current (max.) 43.0 A (60%)

Effective current (max.) 33.0 A

Power factor (cos j) 0.94 (60%)

Efficiency 73.3%

Rated output current, 500 A ; 39.0 V (60%)voltage and duty cycle 387 A ; 33.4 V (100%)

Open circuit voltage range 20 - 51 V

Current range 110 - 500 A

Voltage range 19.5 - 39 V

Number of steps (voltage) 30 (3x10)

Protection class IP21S

Insulation class F+H

Fuse size and type 3 x 40 A (retarded)

Weight (without wire feeder) 220 kg (cooling unit emty)

225 kg (cooling unit full)

Dimensions (WxHxD) 620 x 900 x 930 mm

Compliance IEC 60974-1 ; IEC 60974-10CE

WIRE FEEDER MF-3

Wire feed speed range (vn) 1 - 24 m/min

Soft-arc start speed range % 10 - 100 (v )

Wire size Solid wire -V- 0.8 - 1.0 - 1.2 mm

Flux-cored wire -V knurled- 1.2 - 1.6 mm

Aluminium wire -U- (*) 1.2 mm

Input voltage and power input 42 V ; 90 W

Max. input current 4 A

Protection class IP21

Weight (without torch and cables) 19 kg

Dimensions (W x H x D) 290 x 440 x 675 mm

Compliance IEC 60974-5 ; IEC 60974-10CE

297

ExpressweldExpressweldFEATURES and ADVANTAGES

Ideal for cutting operations in maintenance repair and steel installation workshops.

High performance on cutting of low alloyed steels, stainless steels and aluminium alloys.

380V-3Ph AC input power and max 60 A output current provides cutting of low alloyed steels up to 20 mm.

With the latest inverter technology, Inverter

Plasma 60-Ultra provides a smooth cutting surface despite its small dimensions.

25.5 kg weight.

Moisture separator and pressure reducer included.

Thermostatic overload protection and indicator light.

Fan cooling.

Easy to connect or disconnect torch and ground cable.

Control panel is recessed to eliminate damage. Outer transparent cover protects knobs and buttons against water and dust.

IP21S protection class.

Completely safe and user friendly.

Two years full parts and labour warranty.

Plasma Cutting MachineDigital Inverter Technology - Cutting Thickness: 20 mm

Plasma 60-Ultra

Cutting Procedure

Plasma Arc Cutting

Warranty and Properties

2 Years Warranty

3Phase

20 mmCutting

Thickness380V - 3Ph

TECHNICAL PROPERTIES

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

Plasma Cutting MachineDigital Inverter Technology - Cutting Thickness: 20 mm

1 - Power indicator light

2 - Cutting current control knob

3 - “Run/Gas Purge” selection switch

4 - Ground cable connector

5 - Cutting torch connector

6 - Air pressure gauge

7 - “Ready to Cut” indicator light

8 - “Torch/Air Pressure” indicator light

9 - Thermal protection indicator light

10 - On/Off switch

11 - Air inlet socket

12 - Power supply cable

1

2

3

5

6

7

89

4

10

11

12

EXPRESSWELD Plasma 60-Ultra

Input voltage 380 V ; 3~Ph ; 50/60 Hz

Power input @ rated output 6.9 kW (50%)

Input current (max.) 15.0 A (50%)

12.0 A (100%)

Effective current (max.) 10.6 A (100%)

Power factor (cos j) 0.72 (50%)

Rated output current, 60 A ; 104 V (50%) voltage and duty cycle 43 A ; 97 V (100%)

Open circuit voltage 310 V (DC)

Current range 22 - 60 A

Fuse size and type 20 A (retarded)

Protection class IP21S

Cooling system Fan cooling

Weight (without cables) 25.5 kg

Dimensions (WxHxD) 240 x 440 x 550 mm

298

ExpressweldExpressweldFEATURES and ADVANTAGES

Ideal for cutting operations in maintenance repair and steel installation workshops.

High performance on cutting of low alloyed steels, stainless steels and aluminium alloys.

380V-3Ph AC input power and max 60 A output current provides cutting of low alloyed steels up to 20 mm.

With the latest inverter technology, Inverter

Plasma 60-Ultra provides a smooth cutting surface despite its small dimensions.

25.5 kg weight.

Moisture separator and pressure reducer included.

Thermostatic overload protection and indicator light.

Fan cooling.

Easy to connect or disconnect torch and ground cable.

Control panel is recessed to eliminate damage. Outer transparent cover protects knobs and buttons against water and dust.

IP21S protection class.

Completely safe and user friendly.

Two years full parts and labour warranty.

Plasma Cutting MachineDigital Inverter Technology - Cutting Thickness: 20 mm

Plasma 60-Ultra

Cutting Procedure

Plasma Arc Cutting

Warranty and Properties

2 Years Warranty

3Phase

20 mmCutting

Thickness380V - 3Ph

TECHNICAL PROPERTIES

Liability: All information in this catalog is based on the best available knowledge, is subject to change without notice and can only be considered as suitable for general guidance.Fumes: Consult information on Welding Safety Sheet, available upon request.

Plasma Cutting MachineDigital Inverter Technology - Cutting Thickness: 20 mm

1 - Power indicator light

2 - Cutting current control knob

3 - “Run/Gas Purge” selection switch

4 - Ground cable connector

5 - Cutting torch connector

6 - Air pressure gauge

7 - “Ready to Cut” indicator light

8 - “Torch/Air Pressure” indicator light

9 - Thermal protection indicator light

10 - On/Off switch

11 - Air inlet socket

12 - Power supply cable

1

2

3

5

6

7

89

4

10

11

12

EXPRESSWELD Plasma 60-Ultra

Input voltage 380 V ; 3~Ph ; 50/60 Hz

Power input @ rated output 6.9 kW (50%)

Input current (max.) 15.0 A (50%)

12.0 A (100%)

Effective current (max.) 10.6 A (100%)

Power factor (cos j) 0.72 (50%)

Rated output current, 60 A ; 104 V (50%) voltage and duty cycle 43 A ; 97 V (100%)

Open circuit voltage 310 V (DC)

Current range 22 - 60 A

Fuse size and type 20 A (retarded)

Protection class IP21S

Cooling system Fan cooling

Weight (without cables) 25.5 kg

Dimensions (WxHxD) 240 x 440 x 550 mm

299

Notes

300