Wednesday, 10 April 2019 · Dr. Larraitz Añorga, IK4-Cidetec, ES Room 5 + 6 Manufacturing...
Transcript of Wednesday, 10 April 2019 · Dr. Larraitz Añorga, IK4-Cidetec, ES Room 5 + 6 Manufacturing...
As of 5 April 2018
Wednesday, 10 April 2019
Room 1108:45 hrs Welcome: Prof. Dr. Thomas Otto, Fraunhofer Institute for Electronic Nano Systems ENAS, DE
09:00 hrs Keynote I: 3D Printing: change how the world designs and manufactures, Sascha de Peña, Hewlett Packard
09:40 hrs Keynote II: Artificial Vision - Retinal Implants to Restore Vision in Blind People, Prof. Wilfried Mokwa, RWTH Aachen, DE
10:10 hrs Keynote III: INNPAPER: Innovative and Smart Printed Electronics based on Multifunctionalized Paper: from Smart Labelling to Point of Care Bioplatforms Dr. Larraitz Añorga, IK4-Cidetec, ES
Keynote I - III: Chair: Prof. Dr. Thomas Otto, Fraunhofer Institute for Electronic Nano Systems ENAS, DE / Carles Cané, IMB-CNM (CSIC) Instituto de Microelectrónica de Barcelona, ES
10:40 hrs - 11:05 hrs Coffee break & exhibition
Room 11Design of Smart Integrated SystemsChairperson: Dr. Christian Hedayat, Fraunhofer Institute for Electronic NanoSystems ENAS, DE
Dr. Reinhard Neul, Robert Bosch GmbH, DE
Room 7 + 8Open Access to Smart Systems Manufacturing CapabilitiesChairperson: Uwe Schwarz, X-FAB MEMS Foundry GmbH, DEDr. Michael Scholles, Fraunhofer Institute for PhotonicMicrosystems IPMS, DE
Room 5 + 6Special EPoSS Session I - Smart Systems in the FutureEuropean Funding LandscapeChairperson:
11:05 hrs Integrated climate and water sensors for greenhouses Rene Elfrink, Stichtig IMEC Nederland, NL
11:30 hrs LED actuated wax valves in lab-on-a-foil for bead-based diagnostic devices Mireia Burdó Masferrer, Institut de Microelectrònica de Barcelona, ES
11:55 hrs Low Power High Bandwidth Acceleration Sensors
Dr. Roman Forke, Fraunhofer ENAS, DE
12:20 hrs Modular lab on chip system integrating a gold nanoparticle-based electrochemical sensor for the on-line detection of arsenic in surface waters Pablo Giménez-Gómez, Instituto de Microelectrónica de Barcelona, ES
11:05 hrs Smart Systems manufacturing in small lot sizes Prof. Alfons Dehé, Hahn-Schickard, DE
11:30 hrs Research Fab Microelectronics Germany – cooperative development and manufacturing of smart microsystems
Joerg Amelung, Research Fab Microelectronics Germany FMD, DE
11:55 hrs MICROPRINCE- Open access pilot line for Micro-Transfer-Printing of functional components on wafer level
Dr. Sebastian Wicht, X-FAB MEMS Foundry GmbH, DE
12:20 hrs Transfer printing for heterogeneous silicon PICs Gunther Roelkens, UGent - imec, CH
12:45 hrs - 13:45 hrs Lunch break & exhibition
Room 11System Integration IChairperson: Prof. Klaus-Dieter Lang, Fraunhofer Institute forReliability and Microintegration IZM, DEProf. P.J. French, Delft University of Technology, FR
Room 7 + 8Software for Smart SystemsChairperson: Dr. Wolfgang Dettmann, Infineon Technologies AG, DEChristoph Kögler, T-Systems Multimedia Solutions GmbH, DE
Room 5 + 6Special Session EPoSS Session II - Smart Systems for EnergyChairperson:
13:45 hrs Miniaturized Electronic Modules for Aggressive Environments
Dr. Eckardt Bihler, DYCONEX AG, CH
14:10 hrs Miniaturized 24 GHz Radar Positioning Transponder Module
Thomas Fritzsch, Fraunhofer Institute for Reliability and Microintegration IZM, DE
14:35 hrs Fiber-chip coupling for advanced microsystems Dr. Christian Möller, CIS Forschungsinstitut für
Mikrosensorik GmbH, DE
15:00 hrs Atom Chip technology for use under UHV conditions
Alexander Kassner, Institute of Microproduction Technology, DE
13:45 hrs When Blink Of An Eye Is Not Fast Enough: Low Latency Computing for Smart Systems
Christoph Kögler, T-Systems Multimedia Solutions GmbH, DE
14:10 hrs Supporting the Self-Learning of Systems at the Network Edge with Microservices
Kay Bierzynski, Infineon Technologies AG, DE
14:35 hrs Towards Automated Prototyping of Gesture Recognition Systems for Wearable Devices using Inertial Sensors
Florian Grützmacher, University of Rostock, DE
15:00 hrs Ultrasound technology for touchless HMI system: finger tracker
Borja Saéz Mingorance, Infineon Technologies AG, DE
15:25 hrs - 15:55 hrs Coffee break & exhibition15:25 hrs - 16:25 hrs Poster session
Room 11Test and ReliabilityChairperson: Prof. Sven Rzepka, Fraunhofer Institute forElectronic Nano Systems ENAS, DEDr. Rolf Slatter, Sensitec GmbH, DE
Room 7 + 8Smart Low Cost ApproachesChairperson: Dr. Ralf Zichner, FraunhoferInstitute for Electronic Nano Systems ENAS, DEDr. Larraitz Añorga, IK4-Cidetec, ES
Room 5 + 6ManufacturingChairperson: Jean-Philippe Polizzi, Leti, FR
16:25 hrs Reliability Methodologies and Prognostication of Failures – The Role of Sensing
Dr. Klas Brinkfeldt, RISE, SE
16:50 hrs The Creation of a Validated Scheme for the Automated Optimization of Systems in Package Designs
Ghanshyam Gadhiya, Fraunhofer Institute for Electronic Nano Systems ENAS, DE
17:15 hrs High frequency vibration testing of MEMS-Sensors
Ingolf Leidert, SPEKTRA Schwingungstechnik und Akustik GmbH Dresden, DE
16:25 hrs Paper-based batteries as sustainable power source for disposable electronic devices
Dr. Juan Pablo Esquivel, Fuelium, ES
16:50 hrs Joining two worlds – hybrid integration of silicon based electronics and printed functionalities
Frank Roscher, Fraunhofer Institute for Electronic Nano Systems ENAS, DE
17:15 hrs An All-Inkjet-Printed Photosensor On Flexible Plastic Substrate For The Detection Of Ultraviolet Radiation
Robin Kaufhold, Fraunhofer Institute for Reliability and Microintegration IZM, DE
16:25 hrs Integrated Optical Fiber Sensors in Additive Manufactured Metal Components for Smart Manufacturing Applications Dr. Åsa Claesson, RISE, SE
16:50 hrs Energy harvesting solutions for self-powered IoT Dr. Gonzalo Murillo, Microelectronic Institute of Barcelona, ES
17:15 hrs Plasma Dicing Technology and Total Process James Weber, Panasonic Industry Europe GmbH, DE
18:15 hrs Conference dinner - Pick up 18:15 hrs in front of the Hotel Barceló Sants.
201920
Nominated BEST PAPER AWARD
2018201
Winner BEST PAPER AWARD
201920
Nominated BEST PAPER AWARD
201920
Nominated BEST PAPER AWARD
201920
Nominated BEST PAPER AWARD
Thursday, 11 April 2019
Room 11
Keynote IV - V: Chairperson: Dr. Luis Fonseca, IMB-CNM (CSIC), ES
09:00 hrs Keynote IV: Tbc Khalil Rouhana, European Commission, BE
09:30 hrs Keynote V: Cryogenic electronic interfaces for quantum computing Dr. Fabio Sebastiano, Delft University of Technology, NL
10:00 hrs Panel discussion: Future aspects of smart integrated systems Moderation: Christoph Kögler, T-Systems Multimedia Solutions GmbH, DE / Dr. Chris Merveille, IKERLAN-IK4, ES
10:45 - 11:15 hrs Coffee break & exhibition
Room 11System Integration IIChairperson: Rolf Aschenbrenner, Fraunhofer Institute forReliability and Microintegration IZM, DEProf. Dr. Alfons Dehé, Hahn-Schickard, DE
Room 7 + 8Smart Health and WellbeingChairperson: Dr. An Nguyen-Dinh, Vermon SA, FR Uwe Schwarz, X-FAB MEMS Foundry GmbH, DE
Room 5 + 6Success Stories /EU ProjectsChairperson: Petra Weiler, VDI/VDE Innovation + TechnikGmbH, DEDr. Youri V. Ponomarev, Analog Devices, BE
11:15 hrs Very-Thin System-in-Package Technology for Structural Analysis
Fabian Hopsch, Fraunhofer Institute for Integrated Circuits IIS, DE
11:40 hrs Ultra-thin flexible interposer - a flexible hybrid integration approach to replace wire bonds
Dr. Yacoub-George, Fraunhofer Research Institution for Microsystems and Solid State Technologies EMFT, DE
12:05 hrs Fabrication of Nano Porous Gold on Wafer Level for Thermocompression Bonding
Silvia Hertel, Fraunhofer Institute for Electronic Nano Systems ENAS, DE
12:30 hrs Deep Through Silicon Via in Laser-Ablated CMOS Multi-Project Wafer for Surface-Mountable Integrated MEMS
Yukio Suzuki, Tohoku University, JP
11:15 hrs Fully printable single use self-powered glucometer
Dr. Irene Merino Jimenez, Institut de Microelectronica de Barcelona (IMB-CNM-CSIC), ES
11:40 hrs Facilitating the translation of projects integrating KETs for smart healthcare solutions
Rui Sousa, TecMinho, PT
12:05 hrs Integrated Smart Insole for Preventive Foot Care in Diabetes
Gabriele Rescio, National Research council, IT
12:30 hrs Analyzing sweat to determine state of fatigue Prof. P. J. French, Delft University of Technology, FR
11:15 hrs Next Europractice eXtended Technologies and Services
Dr. Romano Hoofman, IMEC, BE
11:40 hrs SARMENTI: Smart multisensor embedded and secure system for soil nutrient and gaseous emission monitoring
Dr. Suzanne Lesecq, CEA-Leti, FR
12:05hrs Design an Ultra-Low Power Event-Based Camera for Autonomous Vehicles
Dr. Sylvain Saïghi, University of Bordeaux, FR
12:30 hrs 3D Inkjet-printed Smart Luminaires Falk Kemper, Fraunhofer IOF, DE
12:55 hrs - 13:45 hrs Lunch break & exhibition
13:45 hrs - 15:00 hrs Poster session
Room 11Advanced Micro and Nano technologiesChairperson:
Room 7 + 8Smart ProductionChairperson: Dr. Michael Scholles, Fraunhofer Institute forPhotonic Microsystems IPMS, DE
Room 5 + 6Success Stories/EU ProjectsChairperson: Youri V. Ponomarev, Analog Devices, BE
15:00 hrs Advanced Sensing with Assembled, Packaged and Embedded Technologies
Masaya Toda, Tohoku University, JP
15:25 hrs A Low Power Sigma-Delta Modulator in an Advanced 22 nm FDSOI CMOS Process for Sensor Applications
Pragoti Pran Bora, Fraunhofer Research Institution for Microsystems and Solid State Technologies EMFT, DE
15:50 hrs Hermetical Sealing of Pressure Sensor Diaphragms by CVD of SiGe with Minimized Cavity Deposition
Christian Walk, Fraunhofer Institute for Microelectronic Circuits and Systems IMS, DE
16:15 hrs Winner Thomas Geßner Award ENAS
16:40 hrs Compact design of an all-silicon thermoelectric microgenerator
Dr. Luis Fonseca, IMB-CNM (CSIC), ES
15:00 hrs Machine Condition Monitoring for Pay-Per-Use Systems using Magnetoresistive Sensors
Dr. Rolf Slatter, Sensitec GmbH, DE
15:25 hrs RFID – based Wireless Sensor Network for Semiconductor Manufacturing Equipment to enable Predictive Maintenance
Dr. Thomas Moldaschl, CTR Carinthian Tech Research AG, AT
15:50 hrs Printing Beyond Color - Towards the Integration of Digital Printing and Laser Technics into General Manufacturing Environments
Dr. Ralf Zichner, Fraunhofer Institute for Electronic Nanosystems, DE
16:15 hrs Functional integration of piezoelectric senor structures in Fiber Reinforced Plastics (FRP)
Dr. Katharina Koschek, Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM, DE
16:40 hrs Digital manufacturing processes for individual functionalization of automotive parts
André Bucht, Fraunhofer Institute for Machine Tools and Forming Technology, DE
15:00 hrs Magnetic lab on Chip for Early Diagnostics Dr. Valentin Alek Dediu, CNR-ISMN, IT
15:25 hrs SmartVista: Smart Autonomous Multi Modal Sensors for Vital Signs Monitoring
Dr. Kafil Razeeb, University College Cork Tyndall National Institute, IE
15:50 hrs Food Analysis for All: The PhasmaFOOD Project Approach
Dr. Stylianos Georgoulas, INTRASOFT Intl. S.A., GR
16:15 hrs INSPEX: Make environment perception available as a portable system
Julie Foucault, CEA-Leti, FR
16:40 hrs EnABLES: European Infrastructure Powering the Internet of Things
Dr. Mike Hayes, Tyndall National Institute, IE
17:05 hrs End of the conference
As of 1 April 2019
201920
Nominated BEST PAPER AWARD
201920
Nominated BEST PAPER AWARD
201920
Nominated BEST PAPER AWARD
201920
Nominated BEST PAPER AWARD