Waste & Storage Bins - Hospitality, Materials Handling ... · Waste & Storage Bins Forklift Tipping...

Type CFS Tipping Bin

The light weight and cost effective type CFS6 Fork Skip Bin has been manufactured from 2mm plate and is suitable for goods or waste transport and storage. Fitted with a forklift carriage and safety chain, two front wheels, a rear swivel wheel and push handle, these bins are designed for manual push over. Zinc plate finish.

• Fork Pocket size: 140 mm x 65 mm

• Fork Pocket Centres: 367 mm

• Safe Working Load: 350 kg

• Drain Plug fitted standard

Waste & Storage Bins Forklift Tipping Bins

TypeCapacity (cu. m)

SWL (kg)

Length (mm)

Height (mm)

Width (mm)

Overall Width (mm)

Unit Weight (kg)

CFS 6 0.35 350 1120 860 580 730 65

CFS 9 0.65 350 1120 860 900 1050 90

30069486

Proudly distributed byRJ Cox Engineering

www.coxengineering.com.au

Ph: 02)


Type FSB Tipping Bin

A light weight and cost effective bin suitable for goods transport, storage or waste. Manufactured from 2mm plate, and available in either painted or zinc plated finish.

Fitted with a forklift carriage, these bins are designed for manual push over. Wheels fitted standard, two front and one rear.

• Fork Pocket Size: 160 mm x 65 mm

• FSB6 Fork Pocket Centres: 300 mm

• FSB9 Fork Pocket Centres: 640 mm

Options Available:

• Crane Lugs

• Drain Valve & Strainer


SWL (kg)

Length (mm)

Height (mm)

Width (mm)

Overall Width (mm)

Unit Weight (kg)

FSB 6 0.35 350 1120 860 580 730 65

FSB 9 0.65 350 1120 860 900 1050 90

WIDTH

HEIGHT

OVERALL

WIDTH

LENGTH

FSB 6

FSB 9 FSB 6 Tipped

30069486



Ph: 02)


Type NSD Tipping Bin

The NSD self dumping waste bins provide an economical solution to collecting and disposing of industrial waste. During transport, the forklift tines are positioned fully under the bin ensuring the forklifts full lifting capacity is utilised.

To empty the bin the operator places the front feet of the bin inside the edge of the bulk dumpster, then drive backwards until the tines clear the pivot point and then raise to allow the bin to tip forward. Available in either painted or zinc plated finish.



• Fork Pocket Centres: NSD6: 380 mm NSD9 – NSD18: 635 mm

Options Available:

• Crane Lugs


• Cast Iron or Rubber Wheels


Length (mm)

Width (mm)

Height (mm)

Unit Weight

(kg)

NSD 6 0.7 1425 600 1000 185

NSD 9 1.0 1425 900 1000 200

NSD 12 1.35 1425 1200 1000 215

NSD 15 1.7 1425 1500 1000 240

NSD 18 2.0 1425 1800 1000 260

HEIGHT

LENGTH 70

Stackable

NSD 12 + Wheels & Lugs NSD 12

30069486



Ph: 02)


Type SSD Tipping Bin

A low profile, compact bin for use in confined areas. Well suited to production machinery such as punching machines for the collection of slugs etc. Heavy duty construction with self dumping ability, the forklift operator empties the bin without leaving the drivers seat. Available in either painted or zinc plated finish.




• Bin Width: 710 mm

Options Available:

• Crane Lugs



Type Capacity (cu. m) Width (mm) Length (mm) Height (mm)Unit Weight

(kg)

SSD 3 0.2 710 1185 400 80

SSD 4 0.3 710 1245 500 90

SSD 5 0.4 710 1300 600 100

SSD 6 0.5 710 1360 700 110

LENGTH 95

HEIGHT

SSD 3

SSD 6 Stacked

SSD 4 + Wheels

30069486



Ph: 02)


Type JSD Tipping Bin

These are bulk capacity bins for heavy waste, with models available up to 5.4 cubic metres. Manufactured from 5mm plate and channel reinforcement, these bins have an SWL of 3000kg.

The JSD bins are fitted with oversize fork pockets to suit large forklifts. They are a self dumping bin with the operator not having to leave the drivers seat during the tipping cycle. Enamel paint finish.




Options Available:

• Crane Lugs



(kg)

JSD 18 3.2 1910 1900 1125 850

JSD 24 4.3 2510 1900 1125 950

JSD 30 5.4 3110 1900 1125 1050

HEIGHT

LENGTH 35

JSD 18

30069486



Ph: 02)


Type CSD Tipping Bin

The economical CSD bin is a self dumping bin suitable for most waste handling applications. This bin is supplied standard with 4 crane lugs and upending lugs under.

It is also fitted with a drain plug and wheel brackets (wheels not supplied unless ordered). Being a nesting bin, it uses a minimum of space for storage and transport. Available in either

painted or zinc plated finish.


• Crane Lugs fitted standard

• Drain Plug fitted standard

Options Available:

• Rubber or Cast Iron Wheels


Width (mm)

Length (mm)

Height (mm)

Fork Pocket Size (mm)

Fork Pocket Centres

(mm)

Unit Weight (kg)

CSD 9 0.95 1010 1570 1010 185 x 75 380 180

CSD 12 1.25 1310 1570 1010 185 x 75 680 205

HEIGHT

LENGTH

CSD 12

CSD 12 + Wheels CSD 12 Stacked

30069486



Ph: 02)


Type NTU Tipping Bin

The NTU heavy duty tip up bin is manufactured from 3mm plate and is fitted with fully reinforced edges. These bins are ideally suited to heavy waste including metal, timber and building site rubble.

The release mechanism is activated by the forklift operator pulling the pull chord from the driver’s seat. The custom built shock absorber prevents impact forces being transmitted to the forklift during emptying. Available in either painted or zinc plated finish.


• Fork Pocket Centres: 635 mm (NTU 6 – 405 mm)


Options Available:

• Crane Lugs


• Drain Cock & Strainer

Type Capacity (cu. m) Width (mm) Length (mm) Height (mm) Weight (kg)

NTU 6 0.7 600 1420 1000 190

NTU 9 1.0 900 1420 1000 210

NTU 12 1.35 1200 1420 1000 225

NTU 15 1.7 1500 1420 1000 255

NTU 18 2.0 1800 1420 1000 280

HEIGHT

LENGTH 200

NTU 12

NTU 12 Tipped NTU 18

30069486



Ph: 02)


Type TU Tipping Bin

The TU bin is manufactured from 3mm plate and has a lower profile which allows more versatility in confined areas. The pouring lip and smooth formed edges make this bin ideal for food industry applications.

The release mechanism is activated by the forklift operator pulling the draw rope from the driver’s seat. The custom built shock absorber prevents impact forces being transmitted to the forklift during emptying. Available in either painted or zinc plated finish.


• Fork Pocket Centres: 635 mm (TU6 – 405 mm)


Options Available:

• Crane Lugs



Type Capacity (cu. m) Width (mm) Length (mm) Height (mm) Unit Weight (kg)

TU 6 0.5 700 1400 915 185

TU 9 0.75 1000 1400 915 200

TU 12 1.0 1300 1400 915 215

TU 15 1.25 1600 1400 915 240

TU 18 1.5 1900 1400 915 260

HEIGHT

LENGTH 200

TU 9 + Wheels

TU 12 + Wheels TU 12 + Crane Lugs

30069486



Ph: 02)


Type JTU Tipping Bin

A larger bin for bulk capacity, the JTU bin is manufactured from 3mm plate and fitted with strengthening ribs. The release mechanism is activated by the forklift operator pulling the draw rope from the driver’s seat. Powerful shock absorbers prevent impact forces being transmitted to the forklift during emptying. Available in either painted or zinc plated finish.




Options Available:

• Crane Lugs



• Plastic Lids for JTU 18 only

Type Capacity (cu. m) Width (mm) Length (mm) Height (mm) Unit Weight (kg)

JTU 18 2.25 1900 1460 1100 270

JTU 24 3.0 2500 1460 1100 310

HEIGHT

LENGTH 200

JTU 18 + Plastic Lids

JTU 24 + Crane Lugs

30069486



Ph: 02)


Type ROB Rollover Bin

The ROB bin has a smooth tipping action with minimal impact when emptying. The cut away front lip makes this style of bin ideal for tipping liquid product. To tip, the operator simply pulls the handle via a draw rope without leaving their seat. Available in either painted or zinc plated finish.




Options Available:

• Crane Lugs




(kg)

ROB 9 0.90 1050 1500 1095 210

ROB 12 1.15 1350 1500 1095 225

ROB 15 1.40 1650 1500 1095 255

ROB 18 1.70 1950 1500 1095 280

LENGTH155

HEIGHT

ROB 9

ROB 9 + Wheels

30069486



Ph: 02)


Type SROB Roll Sideways Bin

Sideways discharge bin with the ability to tip in either direction. Fork pockets are provided for end or sideways lifting and tipping. This bin is ideally suited to the food industry. Available in either painted or zinc plated finish. Stainless Steel also available on request. Wheels fitted as standard.


• Fork Pockets: 140 mm x 60 mm

• End Fork Pocket Centres: 450 mm

• Side Fork Pocket Centres: 660 mm

Options Available:

• Crane Lugs

• Drain Plug

TypeCapacity (litres)

Width (mm) Length (mm) Height (mm) Unit Weight (kg)

SROB 9 400 700 1200 1075 150

SROB 12 550 700 1500 1075 170

Lever Release Forward Tipped

Sideways Tipped

SROB 12

30069486



Ph: 02)

Waste & Storage Bins Drop Bottom Bins

Type DB Drop Bottom Bin

The DB Drop Bottom Bin is a heavy duty unit manufactured from 3mm plate and is reinforced to handle all types of solid waste product.

Able to be transported by either forklift or crane, emptying is carried out by pulling the draw rope handle which allows the floor to drop open from one side, allowing complete emptying. Shock absorbing system removes all impact from forklift or crane during emptying. Enamel painted finish.




Options Available:



(kg)

DB 800 0.8 1200 1025 1045 225

DB 1100 1.1 1200 1025 1345 250

WIDTH LENGTH

HEIGHT

DB 800

DB 800 + WheelsDB 1100

30069486



Ph: 02)

Waste & Storage Bins Hopper Bins

Type HB Hopper Bin

The HB Hopper Bin has a unique “Clam Shell” opening mechanism and is available in three models with different volume capacities as detailed in the table below. The bin is fitted with forklift pockets and is stackable 2 high. Enamel paint finish.




Options Available:

• Crane Lugs

• Wheels


(kg)

HB1-5 0.5 1120 1120 1350 200

HB1-10 1.0 1120 1120 1750 250

HB1-15 1.5 1120 1120 2150 300

HB1-10

HB1-15 + WheelsClam Shell Gate

30069486



Ph: 02)

Waste & Storage Bins Crane Bins

Type SCB Crane Bins

Heavy duty bins suitable for all waste products. Space saving shape allows bins to nest inside each other for transport and storage. Available in 1 tonne capacity made from 3mm plate or 2 tonne capacity made from 5mm plate. Bins are fitted with 2 way entry fork pockets allowing for emptying with forklifts fitted with rotator, as well as being fitted with crane lugs and upending lugs for emptying by crane. Available in either painted or zinc plated finish.

Options Available:


• 4 Way Entry Pockets

TypeFork

Pocket Size (mm)

Fork Pocket Centres

(mm)

Capacity (cu. m)

SWL (kg)

Width (mm)

Length (mm)

Height (mm)

Unit Weight

(kg)

SCB 112 165 x 65 585 0.75 1000 1200 1230 895 150

SCB 115 165 x 65 865 1.25 1000 1500 1230 1095 180

SCB 121 165 x 65 865 1.80 1000 2100 1230 1095 230

SCB 212 165 x 65 585 0.75 2000 1200 1230 895 220

SCB 215 165 x 65 865 1.25 2000 1500 1230 1095 290

SCB 221 165 x 65 865 1.80 2000 2100 1230 1095 380

WIDTH

HEIGHT

SCB 212

Crane Emptying Forklift Emptying

SCB 221 Stacked

30069486



Ph: 02)


Type SSC Crane Bins

A heavy load capacity storage bin suitable for all manufacturing and construction sites. This versatile bin can be moved by crane, forklift or pallet truck.

Fitted with four way forklift pockets and corner crane lifting lugs, these bins can be stacked 4 high. The bin can be emptied by crane or a forklift fitted with carriage rotator.

Bins have corner drain holes, and are available in either painted or zinc plated finish.

Options Available:

• Cast Iron or Rubber Wheels (not stackable)

• No Drain Holes

Type Capacity (cu. m) SWL (kg) Width (mm) Length (mm)

Height (mm)

Unit Weight (kg)

SSC 400 0.4 2000 1250 1250 475 200

SSC 800 0.8 2000 1250 1250 775 220

SSC 1000 1.0 2000 1250 1250 925 240

SSC 1200 1.2 2000 1250 1250 1075 260

LENGTH / WIDTH

HE

IGH

T

SSC 800 and SSC 1000

4 Way Pockets SSC 1000

SSC 800

30069486



Ph: 02)


Type BWB Bulk Waste Bin

The BWB Bulk Waste Bin is ideal for building and mining sites using overhead cranes. This bin is available in three different sizes up to a maximum capacity of 14 tonne SWL. Enamel paint finish.

Note: BWB 50 supplied with lifting chains.


Height (mm)

Unit Weight (kg)

BWB 15 1.5 3000 1500 1800 830 560

BWB 30 3.0 5000 1500 2400 905 825

BWB 50 5.0 14,000 2400 3000 960 2560

WIDTH (INSIDE) LENGTH

HE

IGH

TBWB 15

BWB 15BWB 30

30069486



Ph: 02)


Type CB 20 Crane Bin

The CB 20 bin is a heavy duty bin suitable for products such as sand, gravel, excavation waste and scrap metal.

The bin comes standard with 6 crane lugs for crane operation, and fork pockets are fitted for transport. Enamel paint finish.

Refer to table for full specifications.




With a larger capacity, the CB 30 has a higher safe working load. Enamel paint finish.




HEIGHT

LENGTH


Manufactured from 6 mm plate and reinforced with additional bracing, the CB 50 is an extremely heavy duty bin for large capacity volumes. Enamel paint finish.





Height (mm)

Unit Weight (kg)

CB 20 1.25 2000 1170 1924 905 310

CB 30 1.90 3000 1330 2155 1045 390

CB 50 2.0 5000 1660 2495 905 720

LENGTH

HEIGHT

CB 50

CB 20

CB 30

30069486



Ph: 02)


Type NCB Crane Bin

A stackable bin designed for crane lifting and emptying. The stack legs allow for easy handling by forklift. Available in either painted or zinc plated finish.


Available Options


• Drain holes

• Fork pockets

Type CPB 6 Crane Bin

A compact, heavy duty stackable bin ideal in machine shops and foundries for component storage. Manufactured from 3mm plate and fitted with crane lugs, these bins are easily moved by forklift or crane. Available in either painted or zinc plated finish.

• Capacity: 0.23 cubic metres


• Unit Weight: 80 kg

Available Options



Width (mm)

Unit Weight

(kg)

NCB 6 0.7 600 160

NCB 9 1.0 900 180

NCB 12 1.35 1200 190

1465

1000

570

980705

NCB 9

CPB 6 Stacked

30069486



Ph: 02)

Waste & Storage Bins - Hospitality, Materials Handling ... · Waste & Storage Bins Forklift Tipping...

Documents

Transcript of Waste & Storage Bins - Hospitality, Materials Handling ... · Waste & Storage Bins Forklift Tipping...