Wall formwork Logo Logo 1 + AluR/SC/PR/DR/S/PASCHAL...Cross section Rectangular hollow profile,...
Transcript of Wall formwork Logo Logo 1 + AluR/SC/PR/DR/S/PASCHAL...Cross section Rectangular hollow profile,...
6
Wall formwork Logo
103
Logo 1 + AluWall formwork
6
104
Wall formwork Logo The modern formwork
Double sports hall, Hindelang; Künelt & Linke, Ofterschwang
6
Wall formwork Logo
105
Technical data Logo 1
Logo 1 Technical data
Max. concrete pressure 60 kN/m2 as per DIN 18218
Tolerances of deflection According to DIN 18202, table 3, line 6
Panel heights 270/240/135/75 cm
Frame depth 12 cm
Frame Profiled flat steel frame of high-strength steel
Cross section Omega profile, suitable to take accessories
Plywood 15 mm thick 11-ply Finnish birch plywood
Tie rod DW 15, max. safe working load 90 kN (not weldable)
Large-size panel 240x270 cm, can be used in vertical or horizontal position
Panel widths 90/75/60/55/50/45/40/30/25/20 cm
Steel filler pieces Widths 5/6 cm with openings for ties
Plastic filler pieces Widths 1/2/3/4 cm
Fixing post Compensations with 21 mm plywood
Inside corner post Leg length 25 cm
Multi-purpose panel Outside corner panel, wall thickness 10 – 50 cm (127 kg)
Variable column formwork 20 – 75 cm in steps of 5 cm
Hinged corner post Inside Leg length 30 cm, adjustable from 60-180 degrees
Fixing for 60/90/135 degrees
Outside Leg length 12,5 cm, adjustable from 60 – 180 degrees
Connecting panel Width 15 cm · height 135 cm
Logo Clamp connection 12 cm profile
Modular Keybolt 7,5 cm profile, oblong hole
Wedge clamp Connecting piece Panels, max. tension 7 kN (1,86 kg)
Multi clamp Connecting piece Variable up to compensation of 12 cm (3,10 kg)
Locking screw Connecting piece Multi-purpose panels (1 kg)
Plastic filler piece up to 12 cm
Steel filler piece 5 and 6 cm
Height extensions
Stop ends
Max. tension force in screw axis 22 kN
Max. shear force 20 kN
Spacer channel Stop end and tensioning on top (7 kg)
Wall thickness 15 – 50 cm in steps of 5 cm (24/36,5 cm)
Combination rail Compensations (30 kg)
Walers
Height extensions
Max. height 8,10 m with pre-assembly in horizontal position
2 combination rails per large-size panel
1 combination rail per compensation panel
Crane lifting clamp Crane transport up to 30 m2 formwork (4,3 kg)
Max. safe working load 900 kg
Loading auxiliary For crane transport of bundled panels
Maximum 1300 kg (4 loading auxiliaries)
Tie rod guide Reduction of ties in the concrete
Platform bracket Walking width 1 m (13 kg)
Max. safe working load for 2 m bracket spacing 3 kN/m2
Suspending piece for props For connecting supports to formwork
Support for walers DW15 Fixing of squared timbers, wooden girders,supporting jacks and steel walers to cross sections
Clamp range 6 – 20 cm
Centering piece Carrying aid for hand assembly (1,0 kg)
Panel support Fixing of formwork on climbing brackets
Adjustment unit Vertical adjustment of formwork on climbing brackets
Technical data – overview
6
Wall formwork Logo Technical data Logo Alu
106
Logo alu Technical data
Max. concrete pressure 60 kN/m2 as per DIN 18218
Tolerances of deflection According to DIN 18202, table 3, line 6
Panel heights 270 cm
Frame depth 12 cm
Frame Angle section, powder-coated
Cross section Rectangular hollow profile, suitable to take accessories, powder-coated
Plywood 15 mm thick 11-ply Finnish birch plywood
Tie rod DW 15, max. safe working load 90 kN (not weldable)
Panel widths 90 (60 kg) /75/60/55/50/45 cm
Steel filler pieces Widths 5/6 cm with openings for ties
Plastic filler pieces Widths 1/2/3/4 cm
Fixing post Compensations with 21 mm plywood
Inside corner post Leg length 25 cm
Multi-purpose panel Outside corner panel, wall thickness 10 – 35 cm (60 kg)
Variable column formwork 20 – 60 cm in steps of 5 cm
Hinged corner post (steel) Inside Leg length 30 cm, adjustable from 60-180 degrees
Fixing for 60/90/135 degrees
Outside Leg length 12,5 cm, adjustable from 60 – 180 degrees
Connecting panel Width 15 cm · height 135 cm
Logo Clamp connection 12 cm profile
Modular Keybolt 7,5 cm profile, oblong hole
Wedge clamp Connecting piece Panels, max. tension force 7 kN (1,86 kg)
Multi clamp Connecting piece Variable up to compensation of 12 cm (3,10 kg)
Locking screw Connecting piece Multi-purpose panels (1 kg)
Plastic filler piece up to 12 cm
Steel filler piece 5 and 6 cm
Height extensions
Stop ends
Max. tension force in screw axis 22 kN
Max. shear force 20 kN
Spacer channel Stop end (7 kg)
Wall thickness 15 – 50 cm in steps of 5 cm
Combination rail Compensations (30 kg)
Walers
Height extensions
Fixing with hook headed profile on rectangular hollow profile
Crane lifting clamp Crane transport up to 60 m2 formwork (4,3 kg)
Max. safe working load 900 kg
Loading auxiliary For crane transport of bundled panels
Maximum 1300 kg (4 loading auxiliaries)
Tie rod guide Reduction of ties in the concrete
Platform bracket Walking width 1 m (13 kg)
Max. safe working load for 2 m bracket spacing 3 kN/m2
Suspending piece for props For connecting supports to formwork
Support for walers DW15 Fixing of squared timbers, wooden girders, supporting jacks and steel walers to cross sections
Clamp range 6 – 20 cm
Technical data – overview
6
The modern formwork Wall formwork Logo
107
Logo wall formwork is the right answerto the requirements made of modernformwork. In a time where deadlinesand costs play a major role, it helpsto reduce forming times and avoidsexpensive improvisation on thebuilding site.
Residential complex, Kehl; Dyckerhoff & Widmann AG, Karlsruhe
■ Tailor-made for building site demands
Sewage plant Rudolstadt; Gärtner, Bad Blankenburg
PASCHAL's principle of solving allformwork tasks on the building sitewith a systematic approach has alsobeen put into practice consistentlywith this system. The load-carryingcapacity of 60 kN/m2 of this wallformwork satisfies the demands ofmost building sites.
6
108
Wall formwork Logo The versatile formwork
■ Versatile possible uses
Logo formwork used as large-sizeformwork. The height extension tothe panels is solved by using thecombination rail which allows largerpanel units to be moved without anyproblems.
Sewage plant, Rudolstadt; CL Schalungsbau, Greiz
Foundations wind power station, Hamburg; H+S, Kiel
The combination of steel and alu-minium panels results in crane-inde-pendent formwork for special de-mands, for example as the formworkfor the foundations of a wind powerstation. Light-weight handset form-work with high load-carrying capacity.
6
The versatile formwork Wall formwork Logo
109
■ System for complex formwork uses
Vertical and horizontal panels can beadjusted ideally to slanting wall upperedges. The range of available panelsizes allows sensible formwork stepswith an ideal solution for each indivi-dual building site.
Warehouse, Endingen; Ernst Späth, Endingen
Union Health Insurance, Saarbrücken; Arge Wolff, Brosius, Lembert, Saarbrücken
The Logo formwork is ideal as wallformwork for very complicated lay-outs. This building site photo showsthe ideal interaction of PASCHALsystems for straight walls with obtuseangles, acute angles and circular wallsformed with the Trapezoidal GirderFormwork.
6
110
Wall formwork Logo Technical data
The Logo frame, consisting of 0,5 cmhigh-strength profiles steel, guaran-tees a long service life for the form-work in building site uses.
■ Stable against change in the form, impact-resistant
■ Long service life
■ Easy to repair
■ Optimum panel range
■ Max. of concrete pressure of 60 kN/m2
The phenol resin-coated plywood ofFinnish birch plywood is providedwith uniform support by the omegaprofiles, resulting in a top qualityconcrete surface. At the same time,
126
Jointfiller
Blind rivetProfiled, high-strength flatsteel frame
Omega profile
the omega profile can be used to fixaccessories such as supports, platformbrackets, combination rails for direc-tionally stable height extensions andfixing pieces.
6
Technical data Wall formwork Logo
111
The omega profiles of the Logoformwork provide a uniform supportfor the plywood. The closed profilesmean that the surface can becleaned without any problems; atthe same time, they can be used tofix all different kinds of accessories.
15 mm plywood
Omega profileto fixaccessories.
■ Each omega profile can be used to fix accessories
■ Simple fixing of adjustable props
■ Simple fixing of platform brackets
■ Directionally stable height extension with combination rail
6
112
Wall formwork Logo Supports/Platform brackets
Simple fixing of the adjustable props,ideal for building site conditions,with simple fixing mechanism con-sisting of wedge and hook headedbolt. The vertical and horizontalomega profiles mean the props canbe fixed at just the right position.
■ Wedge parts
Fixing platform brackets with hookheaded bolts:
■ fast■ simple■ just one part
vertical: horizontal:
1 – insert2 – turn
(clockwise)
1 – insert2 – turn
(anti-clockwise)
11
22
3
3
3 – lock 3 – lock
3x15
1003
145
45
1045
10
6
Crane transport Wall formwork Logo
113
12
■ Defined fixing points for moving formwork panels safely
The crane lifting clamp with its de-fined fixing points guarantees simple,uncomplicated and safe transport ofthe formwork panels for both verticaland horizontal use of the panels.
900 kg
900 kg
6
114
Wall formwork Logo Connecting pieces
■ robust■ light (1,86 kg)■ simple
max. tie force = 7,00 kN
The multi clamp
The wedge clamp:
1-12 cm
■ Variable connecting piece for com-pensations from 1 to 12 cm.
On the right:The combination rail:
■ one piece■ flexible in height■ directionally stable
■ Precise-fit connections with wedge clamp
On the left:The locking screw:Supplementary connecting possibili-ty for special applications
Combination rail150 cm
6
Stop ends Wall formwork Logo
115
1
7
Perforated plateon panel frame
Spacer channel for stop ends for wallthicknesses from 15 cm to 50 cm.
Leutzinger, Pfäffikon/Switzerland; Reichmuth, Freienbach/Switzerland
For wall thicknesses of more than 50 cm,the stop ends can be fixed using thecombination rail.
3870
5470
38
3812
470
38 405
405
54
6
116
Wall formwork Logo Logo Alu
■ Compatible with Logo steel frames
■ Same multi-usable rail
■ Same connecting pieces
■ Same accessories
■ Supplement with steel large-size panel
The objective in developing the alu-minium version was to create a sen-sible supplement to the steel framepanels consisting of a system withaluminium frames, which can beused on the building site as handsetformwork without needing a crane.
Aluminium frame as hollow profile,compatible with the steel frame ver-sion. The light-weight aluminiumformwork system has the load-carry-ing capacity of a steel frame form-work system.
Logo steel frame
Logo Alu
6
Housing projects Wall formwork Logo
117
The Logo formwork is a convincingsolution for housing projects, providingthe right range of panels in heightand width. The formwork meets themany varied demands occurring onthe building site.
Hotel, Hamburg-Ahrensburg; Freytag, Bargteheide
■ Combination possibilities vertical/horizontal
The combination of panels in verticaland horizontal position, with andwithout height extensions, results inmany varied possibilities on thebuilding site. Recesses and heightoffsets can be formed without anyproblems using Logo.
Hotel, Hamburg-Ahrensburg; Freytag, Bargteheide
6
118
Wall formwork Logo Housing projects
Complicated layouts and layouts fullof corners can be formed easily andeconomically with Logo, withoutneeding costly timber filler pieces onsite.
Cellar of a detached house; Heinrich Müller GmbH, Ulmbach
■ The economical solution for all possible applications
Old people's home "Papillon", Homberg-Efze; Daume, Gilserberg
Logo formwork is always an eco-nomical solution, not only for lay-outs with right angles but also forlayouts with acute and obtuse angles.Here in particular, the range of panelsavailable in the system reduces thetime-consuming and costly cuttingand fitting of additional compensa-tion timbers.
6
Housing projects Wall formwork Logo
119
The Logo formwork can be used notonly for large surfaces, but is alsoideal for forming small wall surfacesquickly and efficiently. The system isflexible and versatile in all possibleapplications.
Residential and business building, Konstanz; Dyckerhoff & Widmann AG, Singen
■ The versatile solution for housing projects
Air-raid cellar, Hinwil/Switzerland; Usseglio Bau AG, Laupen/Switzerland
Shafts such as this sluice system foran air-raid cellar can be formed usingstandard parts without any prob-lems. This means it is possible topractically avoid the time-consu-ming and costly use of compensa-tion timbers to make up the remain-ing dimensions.
6
120
Wall formwork Logo Industrial construction
The large-size panel 240x270 cmmakes Logo the ideal formwork sys-tem providing the ideal answer forevery possible situation in industrialand engineering construction.
Clinic for mother and child, Durbach; ARGE Dyckerhoff & Widmann/Ed Züblin AG.
■ Large-size formwork system for industrial construction
Leutzinger, Pfäffikon/Switzerland; Reichmuth, Freienbach/Switzerland
The large-size panels can be assem-bled without any problems using thecombination rail; the resulting form-work units can then be moved as onepiece.
6
Industrial construction Wall formwork Logo
121
Demands for rapid forming timeswhich guarantee the necessary qual-ity in the resulting concrete productare met without any problems byusing large-size panels measuring240x270 cm, which can be assem-bled in height using the combinationrail to form large units.
Supermarket, Bretten; Dyckerhoff & Widmann AG, Karlsruhe
■ Directionally stable height extensions with the combination rail
Supermarket, Bretten; Dyckerhoff & Widmann AG, Karlsruhe
The arrangement of the large-sizepanels produces a tidy pointing andenables a minimization of ties. Theintegrated top quality one-piecenon-jointed plywood guarantees aperfect surface quality for the con-crete.
6
122
Wall formwork Logo Circular walls
Logo formwork can be used not onlyfor straight walls, but also for crea-ting polygonal-type walls with just afew special parts. Multi clamps canbe used to connect the panels with-out the nuisance of having to drillthe squared timbers.
Multi-family dwelling, Hamburg; Freytag, Bargteheide
■ Special applications
90
90
9090
90
90
909060
90
90
9060 90 90
90
90
90
25 25
135
135
90 90
270
90 90
Multi clamps
View from the outside
Timber filler piece
Tie rods
125
150
40540
75300
8,5
270
6
Walls, restraint points Wall formwork Logo
123
Variable corner solutions for differ-ent wall thicknesses are possible us-ing
■ Inside corner post
■ Multi-purpose panel
■ Compensation panel
The design of the locking screw andthe structure of the multi-purposepanel result in a precisely fitting anda positive connection of the outsideformwork in the corner.
Air-raid cellar, Hinwil/Switzerland; Usseglio Bau AG, Laupen/Switzerland
55
55
9090
30
30 240
240 240
240
MULTI 90
55
90 906055
240
240
AGB
55
55 MULTI 90
MULTI 90 55
55
In an additional variation, the systemcomponents are used to create a cor-ner solution with outside cornerposts and wedge clamps.
Corner solution with multi-purpose panel
25
w
6
124
Wall formwork Logo Walls, restraint points
Logo formwork can be used not onlyto form right-angled corners. Allother corners starting at 60° can becreated using hinged corner posts,small compensation panels and pos-sibly also plastic compensations.
Residential complex in Kehl; Dyckerhoff & Widmann AG, Karlsruhe
On the right:The hinged corner posts are used forall other acute and obtuse angles.
6
25
66
2
2
16
6
6
6
4K4S
4S4K
4K
4K 4S
4S
4S
4K
50
50
240
240
90
90
90
90
40
404050
MULTI 90
75
75
60
9090
30
240240
3040
30
90
30
30 90
90
Above:Layout with drawing from the Technical Department for the above building site.
Plate stripPlate strip
Hinged bracing
Hinged bracing
6
Columns/Beams Wall formwork Logo
125
Logo formwork can be used as col-umn formwork with the multi-pur-pose panels in cases where a specialcolumn formwork is uneconomicalfrom the point of view of frequencyof use. More information about col-umn formwork is available in thecorresponding chapter of the manu-al and in the Technical InformationLogo.
Industrial unit, Ober-Mörlen; Wagener, Ober-Mörlen
■ Use as column/beam formwork system
Vereinsbank, Luxembourg; HT, Lux, Luxembourg
Beams with a wide range of differentdimensions can be formed at anytime with the right dimensionsthanks to the wide range of panelwidths and heights.
6
126
Wall formwork Logo Walls with Logo alu
Logo alu is used wherever steel frameformwork is too heavy to be used ashandset formwork. This formworksystem combines the load-carryingcapacity of a steel frame formworkwith the low weight of aluminiumformwork.
Mountain rescue service hut, Mittenwald; Robert Danner, Mittenwald
■ Light in weight and stable - the aluminium version
Residential building, Freiburg-Gundelfingen; Sagner, Rheinhausen
Aluminium formwork used on abuilding site where no crane is avail-able, and which requires the load-carrying capacity of a formwork sys-tem with two ties in the height.
6
Walls with Logo alu Wall formwork Logo
127
Logo aluminium formwork system,combined with steel frame panels.The structure of the aluminiumformwork with multi-usable rail andfixing points is identical to the steelversion.
School, Süderbrarup; Lorenzen Bau GmbH, Süderbrarup
■ Logo Alu combined with Logo 1
School, Süderbrarup; Lorenzen Bau GmbH, Süderbrarup
Total compatibility of the steel andaluminium frames is a fundamentalfeature of this formwork system.Light-weight compensation panelswith steel frames supplement thelarger aluminium panels.
6
128
Wall formwork Logo Foundations
Foundations and low wall units canbe formed with this system whenused horizontally.
Commercial building, Treischfeld; Werner, Eiterfeld
■ Use as foundation formwork
■ economical
■ light-weight
■ flexible
20 6065
4560 20
4070
5070
40
45100
8045
270
Inner kicker
Outer raised flange
Height = 90 cmHeight = 75 cm
Height up to 60 cmDistance between foundation straps
Foundation strap
6
Single-sided wall formwork Wall formwork Logo
129
Logo wall formwork combined withsupporting jacks as single-sidedformwork. More information aboutsingle-sided formwork is available inthe corresponding chapter of thismanual and in the Technical Infor-mation Logo.
Volksbank, Eberswalde; Sanierungs-Wohnbau GmbH, Eberswalde
■ Single-sided wall formwork with PASCHAL components
Sparkasse, Wingerode; Märkl, Wingerode
Supporting jacks and wall formworkused for construction work on al-ready existing buildings, and for re-furbishment tasks.
6
130
Wall formwork Logo Climbing
Logo wall formwork in combinationwith the climbing components byPASCHAL . More information aboutclimbing systems is available in thecorresponding chapter of this manu-al and in the Technical InformationLogo.
Industrial building, Elgersweier; Ritter, Schutterwald
■ Systematic climbing solutions using PASCHAL components
Dry dock, Thailand, Royal Thai Marine; Hyundai/Korea
Logo large-size panels combinedwith PASCHAL climbing scaffoldused for high, straight wall sections.
Wall formwork Logo
131
Parts List
Art.-No Bezeichnung kg Art.-No Bezeichnung kg
Logo 1 inside cornerpost
176.005.0250 25 x 25 x 270 cm 61,40
Logo 1 outside cornerpost
176.006.0001 270 cm 31,50
Logo 1 hinged cornerpost, outside
176.007.0001 12,5 x 12,5 x 270 cm 52,40
Logo 1 hinged cornerpost, inside
176.007.0002 30 x 30 x 270 cm 92,00
Logo 1 plasticfiller piece
176.011.1010 1 x 270 cm 2,94176.011.1020 2 x 270 cm 5,88176.011.1030 3 x 270 cm 8,82176.011.1040 4 x 270 cm 11,76
Logo 1 large-size panel
176.001.2400 240 x 270 cm 311,00
Logo 1 panel
176.001.0900 90 x 270 cm 95,60176.001.0750 75 x 270 cm 84,20176.001.0600 60 x 270 cm 73,80176.001.0550 55 x 270 cm 69,40176.001.0500 50 x 270 cm 67,00176.001.0450 45 x 270 cm 62,60176.001.0400 40 x 270 cm 59,20176.001.0300 30 x 270 cm 51,00176.001.0250 25 x 270 cm 45,40176.001.0200 20 x 270 cm 42,00
Logo alu panel
176.901.0900 90 x 270 cm 59,90176.901.0750 75 x 270 cm 52,70176.901.0600 60 x 270 cm 45,50176.901.0550 55 x 270 cm 43,10176.901.0500 50 x 270 cm 41,00176.901.0450 45 x 270 cm 38,60176.901.0400 40 x 270 cm 36,20176.901.0300 30 x 270 cm 30,30
Logo 1 multi-purposepanel
176.004.0900 90 x 270 cm 126,80
Logo alu multi-purpose panel
176.904.0750 75 x 270 cm 60,10
Art.-No Item kg Art.-No Item kg
Subject to technical changes
6
132
Wall formwork Logo Parts List
Art.-No Bezeichnung kg Art.-No Bezeichnung kg
Logo 1 inside cornerpost
177.005.0250 25 x 25 x 240 cm 57,00
Logo 1 outside cornerpost
177.006.0001 240 cm 25,50
Logo 1 hinged cornerpost, outside
177.007.0001 12,5 x 12,5 x 240 cm 48,00
Logo 1 hinged cornerpost, inside
177.007.0002 30 x 30 x 240 cm 83,00
Logo 1 plastic fillerpiece
177.011.1010 1 x 240 cm 2,61177.011.1020 2 x 240 cm 5,22177.011.1030 3 x 240 cm 7,83177.011.1040 4 x 240 cm 10,44
Logo 1 steel filler piece
176.018.0050 5 x 270 cm 20,00176.018.0060 6 x 270 cm 22,00
Logo 1 filler plategalvanized
176.012.0002 5 – 10 x 270 cm 19,50
Logo 1 fixing post
176.013.0001 4 x 270 cm 5,20
Logo 1 panel
177.001.0900 90 x 240 cm 88,60177.001.0750 75 x 240 cm 74,60177.001.0600 60 x 240 cm 66,60177.001.0550 55 x 240 cm 61,70177.001.0500 50 x 240 cm 59,80177.001.0450 45 x 240 cm 55,90177.001.0400 40 x 240 cm 53,00177.001.0300 30 x 240 cm 45,80177.001.0250 25 x 240 cm 42,30177.001.0200 20 x 240 cm 39,80
Logo 1 multi-purposepanel
177.004.0900 90 x 240 cm 116,00
Art.-No Item kg Art.-No Item kg
Subject to technical changes
6
Wall formwork Logo
133
Parts List
Art.-No Bezeichnung kg Art.-No Bezeichnung kg
Logo 1 multi-purposepanel
175.004.0900 90 x 135 cm 68,40
Logo 1 inside cornerpost
175.005.0250 25 x 25 x 135 cm 33,00
Logo 1 outside cornerpost
175.006.0001 135 cm 15,50
Logo 1 hinged cornerpost, outside
175.007.0001 12,5 x 12,5 x 135 cm 28,00
Logo 1 hinged cornerpost, inside
175.007.0002 30 x 30 x 135 cm 46,20
Logo 1 plastic fillerpiece
175.011.1010 1 x 135 cm 1,47175.011.1020 2 x 135 cm 2,94175.011.1030 3 x 135 cm 4,41175.011.1040 4 x 135 cm 5,88
Logo 1 steel filler piece
175.018.0050 5 x 135 cm 10,50175.018.0060 6 x 135 cm 11,50
Logo 1 filler plategalvanized
175.012.0002 5 – 10 x 135 cm 10,00
Logo 1 steel filler piece
177.018.0050 5 x 240 cm 17,00177.018.0060 6 x 240 cm 19,00
Logo 1 filler plategalvanized
177.012.0002 5 – 10 x 240 cm 17,30
Logo 1 fixing post
177.013.0001 4 x 240 cm 4,50
Logo 1 panel
175.001.2700 270 x 135 cm 186,00175.001.2400 240 x 135 cm 165,00
Logo 1 panel
175.001.0900 90 x 135 cm 53,80175.001.0750 75 x 135 cm 48,00175.001.0600 60 x 135 cm 41,60175.001.0550 55 x 135 cm 39,80175.001.0500 50 x 135 cm 38,00175.001.0450 45 x 135 cm 35,80175.001.0400 40 x 135 cm 34,60175.001.0300 30 x 135 cm 29,00175.001.0250 25 x 135 cm 24,70175.001.0200 20 x 135 cm 22,90
Art.-No Item kg Art.-No Item kg
Subject to technical changes
6
134
Wall formwork Logo Parts List
Art.-No Bezeichnung kg Art.-No Bezeichnung kg
Logo 1 hinged cornerpost, outside
174.007.0001 12,5 x 12,5 x 75 cm 15,50
Logo 1 hinged cornerpost, inside
174.007.0002 30 x 30 x 75 cm 27,00
Logo1 steel filler piece
174.018.0050 5 x 75 cm 5,50174.018.0060 6 x 75 cm 6,90
Logo 1 plastic fillerpiece
174.011.1010 1 x 75 cm 0,82174.011.1020 2 x 75 cm 1,64174.011.1030 3 x 75 cm 2,46174.011.1040 4 x 75 cm 3,28
187.500.0001 Logo 1 wedge clamp 1,86
187.500.0000 Logo 1 multi clamp 4,00variable 0 – 12 cm
Logo 1 fixing post
175.013.0001 4 x 135 cm 2,55
Connecting panelLogo 1-Modular Formwork
180.002.0088 15 x 135 cm 22,60
Logo 1 panel
174.001.0500 50 x 75 cm 23,00
Logo 1 multi-purposepanel
174.004.0900 90 x 75 cm 49,50
Logo 1 inside cornerpost
174.005.0250 25 x 25 x 75 cm 20,50
Logo 1 outside cornerpost
174.006.0001 75 cm 8,00
Art.-No Item kg Art.-No Item kg
Subject to technical changes
6
6
Subject to technical changes
Wall formwork Logo
135
Parts List
Art.-No Bezeichnung kg Art.-No Bezeichnung kg
187.500.0019 Logo1 loading auxiliary 0,85
187.500.0021 Support for walers 1,20DW 15clamping length 6 – 20 cm
Hook headed bolt DW 15
187.500.0022 300/240 0,41187.500.0024 400/340 0,57183.500.0034 220/160 0,28
187.500.0008 Logo 1 tie rod guide 2,35
183.500.0040 Hinged bracing 65,0060° – 180°
187.500.0040 Logo 1 dismantling aid 6,00
187.500.0023 UNI carbide scraper 1,20Logo 1 100 x 850 mm
183.500.0014 Assembly and dismant- 3,10ling tool Logo 1/Athlet
187.500.0002 Logo 1 locking screw 1,00DW 15 x 215 cpl.
Tie rod, bevelled
189.006.0850 DW 15 x 85 cm 1,19189.006.1000 DW 15 x 100 cm 1,40189.006.1350 DW 15 x 135 cm 1,85
189.001.0059 Plate with ball-and- 1,00socket jointDW 15, 10 x 14 cm(inclin. max. 12°)
187.500.0005 Logo1 platform bracket 13,0090 cm
187.500.0006 Logo 1 spacer channel 7,1015 – 50 cm
183.500.0033 Combination rail 30,00Logo 1/Athlet 150 cm
187.500.0013 Logo 1 locking bow for 0,81hinged corner insidecpl. for 60°/90°/135°
187.500.0030 Logo 1 crane lifting 4,30clamp KLSAdmissible capacity 900 kg
Art.-No Item kg Art.-No Item kg
Welding isnot possible
6
Subject to technical changes
136
Wall formwork Logo Parts List
Art.-No Bezeichnung kg
187.500.0026 Logo 1 centering piece 0,98
Logo1 foundation strap
187.501.0120 12 cm 0,29187.501.0150 15 cm 0,31187.501.0175 17,5 cm 0,32187.501.0200 20 cm 0,34187.501.0240 24 cm 0,37187.501.0250 25 cm 0,39187.501.0300 30 cm 0,41187.501.0350 35 cm 0,44187.501.0365 36,5 cm 0,45187.501.0400 40 cm 0,47187.501.0450 45 cm 0,50187.501.0500 50 cm 0,54187.501.0600 60 cm 0,60187.501.0700 70 cm 0,67187.501.0800 80 cm 0,74187.501.0900 90 cm 0,80187.501.1000 100 cm 0,87
189.002.0003 Transportation box 93,50hot-dip galvanized120 x 80 x 61 cm
Art.-No Item kg