VX series

2,000kg / 2,500kg / 3,000kg / 3,500kgLP Gas Forklift Trucks• New high Visibility Masts and optional Side Shifting Fork Positioner• IntellixTM Vehicle Management System with CANbus technology• 3 application matched transmissions, including the World’s best hydrodynamic transmission - the Yale TechtronixTM

• Oil immersed brakes• AccuTouchTM minilevers and manual levers• Superelastic and pneumatic radial tyres

2

Truck Dimensions

OptionslPowertrain protection systemlPremium monitoring packagelAccumulatorlKeyless start (with auxiliary key switch)l Traction speed limiterlHeavy-duty “Combi Cooler” radiatorlSwing-out, drop-down EZ-Tank bracketlReturn-to-set tiltlSwivel full suspension seatl Foot directional controllOperator passwordlAlarm-reverselAmber strobe light - continuous activatedl Impact monitorl Load weight indicator

Engine Specifications MastsPSI 2.4L, LPG Base, Value 4 Cylinder Overhead valveDisplacement 2.4 litre Power 44.0kW @ 2,700rpmTorque 164Nm @ 2,000rpmAir Filtration 2 stage, dry typeEmission Control Closed loop

Kubota 2.5L, LPGProductivity 4 Cylinder Overhead valveDisplacement 2.5 litre Power 43.9kW @ 2,500rpm Torque 171Nm @ 1,800rpmAir Filtration 2 stage, dry typeEmission Control Closed loop

A full range of Yale 2-stage LFL and 2-stage and 3-stage FFL masts are available.

The new Yale masts are designed for maximum visibility, with widely spaced channels, lift chains and main lift cylinders.

4.5h4

4.4h3

4.2h1

4.3h2

4.22s

4.1a

4.22l 1.8x

1.8x

4.19l1

l6

1.9y

4.20l2

4.20l2

4.12h10

1.6c 4.8h7

4.7h6

4.32m24.31m1

4.21b1

b124.36b13

4.34.1/4.34.2Ast

100mma2 100mma2

b

4.35

Wa

Q

b

3

GLP 20VX, GLP 25VX Mast details and capacity ratings (kg) - Superelastic tyres

GLP 20VX, GLP 25VX Mast details and capacity ratings (kg) - Pneumatic Radial tyres

GLP 30VX, GLP 35VX Mast details and capacity ratings (kg) - Superelastic tyres

GLP 30VX, GLP 35VX Mast details and capacity ratings (kg) - Pneumatic Radial tyres

h1 (mm)

h1 (mm)

h1 (mm)

h1 (mm)

h2+s (mm)

h2+s (mm)

h2+s (mm)

h2+s (mm)

h3+s (mm)

h3+s (mm)

h3+s (mm)

h3+s (mm)

h4 (mm)

h4 (mm)

h4 (mm)

h4 (mm)

Tilt

Tilt

Tilt

Tilt

F

F

F

F

B

B

B

B

Mast

Mast

Mast

Mast

2 Stage LFL

2 Stage LFL

2 Stage LFL

2 Stage LFL

2 Stage FFL

2 Stage FFL

2 Stage FFL

2 Stage FFL

3 Stage FFL

3 Stage FFL

3 Stage FFL

3 Stage FFL

ModelTyre size, front Overall width, front

ModelTyre size, front Overall width, front

ModelTyre size, front Overall width, front

ModelTyre size, front Overall width, front

* With wide tread drive tyres (1317 mm width) or dual drive tyres (1601 mm width) - required for this rating. h2 & h4 are less loadbackrest.

* With wide tread drive tyres (1321 mm width) or dual drive tyres (1601 mm width) - required for this rating. ** Dual Drive tyres (1601 mm width) - required for this rating. h2 & h4 are less loadbackrest.

* With wide tread drive tyres (1317 mm width) or dual drive tyres (1601 mm width) - required for this rating. h2 & h4 are less loadbackrest.

* With wide tread drive tyres (1321 mm width) or dual drive tyres (1601 mm width) - required for this rating. ** Dual Drive tyres (1601 mm width) - required for this rating. h2 & h4 are less loadbackrest.

GLP 20 VX7.00 x 121157mm

GLP 20 VX7.00 R121157mm

GLP 30 VX28 x 9-151186mm

GLP 30 VX225 / 75R15

1186mm

GLP 25 VX7.00 x 121157mm

GLP 25 VX7.00 R121157mm

GLP 35 VX28 x 9-151186mm

GLP 35 VX225 / 75R15

1186mm

ForksLoad centre (kg)

ForksLoad centre (kg)

ForksLoad centre (kg)

ForksLoad centre (kg)

ForksLoad centre (kg)

ForksLoad centre (kg)

ForksLoad centre (kg)

ForksLoad centre (kg)

500

500

500

500

500

500

500

500

500

500

500

500

500

500

500

500

600

600

600

600

600

600

600

600

600

600

600

600

600

600

600

600

700

700

700

700

700

700

700

700

700

700

700

700

700

700

700

700

ISS & FPLoad centre (kg)

Integral SideshiftLoad centre (kg)

ISS & FPLoad centre (kg)

ISS & FPLoad centre (kg)

ISS & FPLoad centre (kg)

Integral SideshiftLoad centre (kg)

ISS & FPLoad centre (kg)

ISS & FPLoad centre (kg)

217024202770302021701970217024202620

217024202770302021701970217024202620

2195244527953045219519952195234524452695

2195244527953045219519952195234524452695

14014014014015581382158218322030

14014014014015581382158218322030

150150150150149513191519166917692015

150150150150149513191519166917692015

329037904330483033004350495055506000

329037904330483033004350495055506000

3105360541054605311040154615491552155815

3105360541054605311040154615491552155815

390444044944544439144938553861386588

390444044944544439144938553861386588

3809430948095309381046945294559458946494

3809430948095309381046945294559458946494

200020002000191020002000189017601660

20002000200019102000200018801760*1650*

3000300030002890300030002900284027402610*

3000300030002890300030002900*2830*2760*2610**

2500250025002400250025002370

2240* 2120*

2500250025002390*25002500*2370*2240**2130**

35003500350033903500350034003320*3250*2950*

350035003500334035003500*3400*3330**3250**3080**

192019101890180019201880176016301530

19201910189017901920188017601630*1520*

2820281027902690282028002700263025602400*

2820281027902690282028002700*2630*2550*2400**

2370236023502240238023802250 2110* 1990*

2370236023502240*23802380*2250*2110**1990**

33103300329031703310329031903110*3030*2860*

331033003290317033103290*3190*3110**3040**2860**

175017401730164017501720161014901400

17501740173016301750172016101490*1380*

2580257025602450258025602470241023402200*

2580257025602450258025602470*2400*2340*2190**

2170216021502040217021702060

1930* 1800*

2170216021502040*21702170*2060*1930**1810**

30303020301029003030301029202850*2780*2610*

303030203010289030303010*2920*2850**2780**2610**

200020001990189020001970185017201600

20002000199018902000197018501710*1600*

2970295029402830296029302830276026802510*

2970295029402820296029302830*2750*2680*2510**

2500250024802370250025002370

2220* 2090*

2500250024802360*25002500*2370*2220**2100**

349034803460334034903460335032603180*2970*

3490348034603340349034303350*3270**3190**3000**

184018301810172018401790168015601460

18401830181017201840179016801560*1450*

2700269026702570270026702580251024402290*

2700269026702570270026702580*2510*2440*2290**

2280227022502150228022802160

2020* 1900*

2280227022502150*22802280*2150*2020**1910**

318031703150304031803150305029802900*2730*

3180317031503040318031503050*2980**2900**2740**

168016801660158016901640154014301340

16801680166015701690164015401430*1330*

2480247024502350248024502370231022402100*

2480247024502350248024502370*2300*2240*2090**

2090208020701960209020901980

1850* 1740*

2090208020701960*20902090*1980*1860**1740**

292029102890278029202890280027302660*2500*

2920291028902780292028902800*2730**2670**2500**

666666666

666666666

6666666666

6666666666

555555555

555555555

5555555555

5555555555

VX series4

VDI 2198 – General Specifications, LPG powered GLP20VX, GLP25VXD

istin

guis

hing

mar

kW

eigh

tsTy

res/

chas

sis

Dim

ensi

ons

Per

form

ance

dat

a C

ombu

stio

n en

gine

Add

ition

dat

a

Manufacturer (abbreviation)Manufacturer’s type designation

Engine/Transmission

Model Brake TypeDrive: electric (battery or mains), diesel, petrol, fuel gasOperator type: hand, pedestrian, standing, seated, orderpickerRated capacity / rated loadLoad centre distanceLoad distance, centre of drive axle to forkWheelbaseService weight Axle loading, laden front / rearAxle loading, unladen front / rearTyres: P = pneumatic, V = cushion, SE = superelastic Tyre size, frontTyre size, rearNumber of wheels, front/rear (x = driven wheels)Tread, frontTread, rearTilt of mast/fork carrige, forward / backward β Height, mast loweredFree lift tLift tHeight, mast extended :Height of overhead guard (cabin) mCab height (open cab) Seat height relating to SIP/stand height 8Coupling heightOverall lengthLength to face of forksOverall width qFork dimensions ISO 2331Fork carriage ISO 2328, class/type A, BFork carriage width wGround clearance, laden, below mastGround clearance, centre of wheelbaseLoad dimension b12 × l6 crossways Aisle width predetermined load dimensions Aisle width with pallets 1000mm x 1200mm crossways Aisle width with pallets 800mm wide x 1200mm lengthways Turning radiusInternal turning radius90° intersecting aisle (with pallet W = 1200mm, L = 1000mm)Step height (from ground to running board)Step height (between intermediate steps between running board and floor)Travel speed laden/unladenTravel speed, laden/unladen, backwards Lift speed, laden/unladen Lowering speed, laden/unladen Drawbar pull, laden/unladen *Maximum drawbar pull laden/unladen, Gradeability, laden/unladen ** Acceleration time, laden/unladenService brakeEngine manufacturer/typeEngine power according to ISO1585Rated speed Number of cylinders/displacementFuel consumtion according to VDI cycleType of drive unitOperating pressure for attachmentsOil volume for attachments ◊Hydraulic oil tank, capacityFuel tank, capacity Sound pressure level at the driver’s seat HSound power level during the workcycle u Guaranteed sound power 2000/14/ECTowing coupling, type DIN

1.1

1.2

1.3

1.4

1.5

1.6

1.8

1.9

2.1

2.2

2.3

3.1

3.2

3.3

3.5

3.6

3.7

4.1

4.2

4.3

4.4

4.5

4.7

4.71

4.8

4.12

4.19

4.20

4.21

4.22

4.23

4.24

4.31

4.32

4.33

4.34

4.34.1

4.34.2

4.35

4.36

4.41

4.42

4.43

5.1

5.1.1

5.2

5.3

5.5

5.6

5.7

5.9

5.10

7.1

7.2

7.3

7.4

7.5

8.1

10.1

10.2

10.3

10.4

10.7

10.7.1

10.7.2

10.8

Q (t)c (mm)x (mm)y (mm)kgkgkg

b10 (mm)b11 (mm)a / b (o)h1 (mm)h2 (mm)h3 (mm)h4 (mm)h6 (mm)(mm)h7 (mm)h110 (mm)l1 (mm)l2 (mm)b1(mm)s/e/l (mm)

b3 (mm)m1 (mm)m2 (mm)b12 x l6 (mm)Ast (mm)Ast (mm)Ast (mm)Wa (mm)b13 (mm)(mm)(mm)(mm)km/hkm/hm/sm/sNN%s

kWmin-1(-)/cm3 l/h or kg/h

barl/minlitreslitresdB(A)dB(A)dB(A)

Yale

PSI 2.4LStandard Electronic, 1-SpeedBaseDrum brakesLPGSeated 2.0500471162335155003 / 5121807 / 1708SE7.00 x 12 - 126.00 x 92x / 29659676 / 5217014032503904216021811061365348624861157 / 1317 / 160140 x 100 x 1000II A10671071601000 × 1200 3820382040202149629198770738217.3 / 18.017.3 / 18.00.61 / 0.630.58 / 0.5018720 / 1100022100 / 1100019.0 / 29.84.8 / 4.3HydraulicPSI 2.4L44.027004 / 23512.5Hydrodynamic0 - 1556245.852.87797101Pin

Yale

PSI 2.4LTechtronix 100, 1-Speed

ValueADS Drum or Oil-immersed LPGSeated 2.0500471162335155003 / 5121807 / 1708SE7.00 X 12 - 126.00 x 92x / 29659676 / 5217014032503904216021811061365348624861157 / 1317 / 160140 x 100 x 1000II A10671071601000 × 1200 3820382040202149629198770238217.3 / 18.017.3 / 18.00.61 / 0.630.58 / 0.5018720 / 1100022100 / 1100019.0 / 29.84.8 / 4.3HydraulicPSI 2.4L44.027004 / 23512.5Hydrodynamic0 - 1556245.852.8

7797101Pin

Yale

Kubota 2.5L Techtronix 100, 1-Speed

ProductivityOil-immersedLPGSeated 2.0500471162335155003 / 5121807 / 1708SE7.00 x 12 - 126.00 x 92x / 29659676 / 5217014032503904216021811061365348624861157 / 1317 / 160140 x 100 x 1000II A10671071601000 × 1200 3820382040202149629198770238216.7 / 17.016.7 / 17.00.62 / 0.640.58 / 0.5019085 / 1100022290 / 1100025.5 / 32.14.5 / 4.0HydraulicKubota 2.5L43.925004 / 24912.6Hydrodynamic0 - 1556645.852.8

7896100Pin

GLP 20VX

** Engine data based on max. capacity displacement. s Top of forks. : Without load backrest.

m h6 subject to +/- 5 mm tolerance. GLP20-25VX add 25mm when front tyre size 28x9-15 is selected.8 Full suspension seat in depressed position.

q Standard/Wide/Dual. When wet axle selected values are (1186 / 1321 / 1601) for all capacities. w Add 32mm with load backrest.

* at 1.6km/h. ** at 4.8km/h. ◊ Variable.

HLPAZ, measured according to the test cycles and based on the weighting values contained in EN12053.

5

VDI 2198 – General Specifications, LPG powered GLP20VX, GLP25VX

Dis

tingu

ishi

ng m

ark

Wei

ghts

Tyre

s/ch

assi

sD

imen

sion

s P

erfo

rman

ce d

ata

Com

bust

ion

engi

neA

dditi

on d

ata

1.1

1.2

1.3

1.4

1.5

1.6

1.8

1.9

2.1

2.2

2.3

3.1

3.2

3.3

3.5

3.6

3.7

4.1

4.2

4.3

4.4

4.5

4.7

4.71

4.8

4.12

4.19

4.20

4.21

4.22

4.23

4.24

4.31

4.32

4.33

4.34

4.34.1

4.34.2

4.35

4.36

4.41

4.42

4.43

5.1

5.1.1

5.2

5.3

5.5

5.6

5.7

5.9

5.10

7.1

7.2

7.3

7.4

7.5

8.1

10.1

10.2

10.3

10.4

10.7

10.7.1

10.7.2

10.8

GLP 20VX GLP 25VXYale

Kubota 2.5LTechtronix 200, 2-Speed

ProductivityOil-immersedLPGSeated 2.0500471162335155003 / 5121807 / 1708SE7.00 x 12 - 126.00 x 92x / 29659676 / 5217014032503904216021811061365348624861157 / 1317 / 160140 x 100 x 1000II A10671071601000 × 1200 3820382040202149629198770238220.8 / 21.216.3 / 16.60.58 / 0.610.58 / 0.5020875 / 1100021800 / 1100026.5 / 32.14.9 / 4.3HydraulicKubota 2.5L43.925004 / 24912.7Hydrodynamic0 - 1556645.852.87896100Pin

Yale

PSI 2.4LStandard Electronic, 1-Speed

BaseDrum brakesLPGSeated 2.5500471162338535732 / 6211737 / 2116SE7.00 x 12 - 126.00 x 92x / 29659676 / 5217014032503904216021811061365355925591157 / 1317 / 160140 x 100 x 1000II A10671071601000 × 1200 3887388740872216629202070738217.3 / 18.017.3 / 18.00.61 / 0.630.58 / 0.5018580/ 1145022000 / 1050016.0 / 29.05.1 / 4.4HydraulicPSI 2.4L44.027004 / 23512.7Hydrodynamic0 - 1556245.852.87797101Pin

Yale

PSI 2.4LTechtronix 100, 1-Speed

ValueADS Drum or Oil-immersed LPGSeated 2.5500471162338535732 / 6211737 / 2116SE7.00 x 12 - 126.00 x 92x / 29659676 / 5217014032503904216021811061365355925591157 / 1317 / 160140 x 100 x 1000II A10671071601000 × 1200 3887388740872216629202070238217.3 / 18.017.3 / 18.00.61 / 0.630.58 / 0.5018580/ 1145022000 / 1050016.0 / 29.05.1 / 4.4HydraulicPSI 2.4L44.027004 / 23512.7Hydrodynamic0 - 1556245.852.87797101Pin

Yale

Kubota 2.5L Techtronix 100, 1-Speed

Productivity Oil-immersedLPGSeated 2.5500471162338535732 / 6211737 / 2116SE7.00 x 12 - 126.00 x 92x / 29659676 / 5217014032503904216021811061365355925591157 / 1317 / 160140 x 100 x 1000II A10671071601000 × 1200 3887388740872216629202070238216.7 / 17.016.7 / 17.00.62 / 0.640.58 / 0.5018946 / 1050022150 / 1050021.8 / 28.04.7 / 4.1HydraulicKubota 2.5L43.925004 / 24912.8Hydrodynamic0 - 1556645.852.87896100Pin

Yale

Kubota 2.5L Techtronix 200, 2-Speed Productivity Oil-immersedLPGSeated 2.5500471162338535732 / 6211737 / 2116SE7.00 x 12 - 126.00 x 92x / 29659676 / 5217014032503904216021811061365355925591157 / 1317 / 160140 x 100 x 1000II A10671071601000 × 1200 3887388740872216629202070238220.8 / 21.216.3 / 16.60.57 / 0.610.58 / 0.5020825 / 1050021800 / 1050022.7 / 28.05.1 / 4.4HydraulicKubota 2.5L43.925004 / 24912.9Hydrodynamic0 - 1556645.852.87896100Pin

u LWAZ, measured according to the test cycles and based on the weighting values contained in EN12053.

Base specification truck based on: 3290mm (GLP20/25VX) / 3105mm (GLP30/35VX) top of forks 2 stage LFL Standard carriage, 1000mm forks and manual levers.

Value and Productivity specification truck based on: 3290mm (GLP20/25VX) / 3105mm (GLP30/35VX) top of forks 2 stage LFL Standard carriage, 1000mm forks and manual levers.

For Value trucks fitted with manual levers, the values for lines 5.2 and 7.5 are as on the Base VDI table.

VX series66

VDI 2198 – General Specifications, LPG powered GLP30VX, GLP35VXD

istin

guis

hing

mar

kW

eigh

tsTy

res/

chas

sis

Dim

ensi

ons

Per

form

ance

dat

a C

ombu

stio

n en

gine

Add

ition

dat

a

Manufacturer (abbreviation)Manufacturer’s type designation

Engine/Transmission

Model Brake TypeDrive: electric (battery or mains), diesel, petrol, fuel gasOperator type: hand, pedestrian, standing, seated, orderpickerRated capacity / rated loadLoad centre distanceLoad distance, centre of drive axle to forkWheelbaseService weight Axle loading, laden front / rearAxle loading, unladen front / rearTyres: P = pneumatic, V = cushion, SE = superelastic Tyre size, frontTyre size, rearNumber of wheels, front/rear (x = driven wheels)Tread, frontTread, rearTilt of mast/fork carrige, forward / backward β Height, mast loweredFree lift tLift tHeight, mast extended :Height of overhead guard (cabin) mCab height (open cab) Seat height relating to SIP/stand height 8Coupling heightOverall lengthLength to face of forksOverall width qFork dimensions ISO 2331Fork carriage ISO 2328, class/type A, BFork carriage width wGround clearance, laden, below mastGround clearance, centre of wheelbaseLoad dimension b12 × l6 crossways Aisle width predetermined load dimensions Aisle width with pallets 1000mm x 1200mm crossways Aisle width with pallets 800mm wide x 1200mm lengthways Turning radiusInternal turning radius90° intersecting aisle (with pallet W = 1200mm, L = 1000mm)Step height (from ground to running board)Step height (between intermediate steps between running board and floor)Travel speed laden/unladenTravel speed, laden/unladen, backwards Lift speed, laden/unladen Lowering speed, laden/unladen Drawbar pull, laden/unladen *Maximum drawbar pull laden/unladen, Gradeability, laden/unladen ** Acceleration time, laden/unladenService brakeEngine manufacturer/typeEngine power according to ISO1585Rated speed Number of cylinders/displacementFuel consumtion according to VDI cycleType of drive unitOperating pressure for attachmentsOil volume for attachments ◊Hydraulic oil tank, capacityFuel tank, capacity Sound pressure level at the driver’s seat HSound power level during the workcycle u Guaranteed sound power 2000/14/ECTowing coupling, type DIN

1.1

1.2

1.3

1.4

1.5

1.6

1.8

1.9

2.1

2.2

2.3

3.1

3.2

3.3

3.5

3.6

3.7

4.1

4.2

4.3

4.4

4.5

4.7

4.71

4.8

4.12

4.19

4.20

4.21

4.22

4.23

4.24

4.31

4.32

4.33

4.34

4.34.1

4.34.2

4.35

4.36

4.41

4.42

4.43

5.1

5.1.1

5.2

5.3

5.5

5.6

5.7

5.9

5.10

7.1

7.2

7.3

7.4

7.5

8.1

10.1

10.2

10.3

10.4

10.7

10.7.1

10.7.2

10.8

Q (t)c (mm)x (mm)y (mm)kgkgkg

b10 (mm)b11 (mm)a / b (o)h1 (mm)h2 (mm)h3 (mm)h4 (mm)h6 (mm)(mm)h7 (mm)h110 (mm)l1 (mm)l2 (mm)b1(mm)s/e/l (mm)

b3 (mm)m1 (mm)m2 (mm)b12 x l6 (mm)Ast (mm)Ast (mm)Ast (mm)Wa (mm)b13 (mm)(mm)(mm)(mm)km/hkm/hm/sm/sNN%s

kWmin-1(-)/cm3

l/h or kg/h

barl/minlitreslitresdB(A)dB(A)dB(A)

Yale

PSI 2.4LStandard Electronic, 1-SpeedBaseDrum brakesLPGSeated 3.0500483162343296619 / 7101802 / 2527SE28 x 9 - 156.50 x 102x / 29659676 / 5219514030553809218522061086390363326331186 / 1321 / 160150 x 120 x 1000III A10671321851000 × 1200 3955395541552277618207772740719.1 / 20.319.1 / 20.30.53 / 0.550.53 / 0.4717054 / 1080019950 / 1080016.9 / 25.05.3 / 4.5HydraulicPSI 2.4L44.027004 / 23513.1Hydrodynamic0 - 1556245.852.87797101Pin

Yale

PSI 2.4LTechtronix 100, 1-Speed

ValueADS Drum or Oil-immersed LPGSeated 3.0500483162343296619 / 7101802 / 2527SE28 x 9 - 156.50 x 102x / 29659676 / 5219514030553809218522061086390363326331186 / 1321 / 160150 x 120 x 1000III A10671321851000 × 1200 3955395541552277618207772740719.1 / 20.319.1 / 20.30.53 / 0.550.53 / 0.4717054 / 1080019950 / 1080016.9 / 25.05.3 / 4.5HydraulicPSI 2.4L

44.027004 / 23513.1Hydrodynamic0 - 1556245.852.8

7797101Pin

Yale

Kubota 2.5L Techtronix 100, 1-Speed

ProductivityOil-immersedLPGSeated 3.0500483162343296619 / 7101802 / 2527SE28 x 9 - 156.50 x 102x / 29659676 / 5219514030553809218522061086390363326331186 / 1321 / 160150 x 120 x 1000III A10671321851000 × 1200 3955395541552277618207772740717.8 / 18.217.8 / 18.20.55 / 0.560.53 / 0.4717380 / 1080020100 / 1080017.6 / 26.14.9 / 4.2HydraulicKubota 2.5L43.925004 / 24913.0Hydrodynamic0 - 1556645.852.8

7896100Pin

GLP 30VX

** Engine data based on max. capacity displacement. s Top of forks. : Without load backrest.

m h6 subject to +/- 5 mm tolerance. GLP20-25VX add 25mm when front tyre size 28x9-15 is selected.8 Full suspension seat in depressed position.

q Standard/Wide/Dual. When wet axle selected values are (1186 / 1321 / 1601) for all capacities. w Add 32mm with load backrest.

* at 1.6km/h. ** at 4.8km/h. ◊ Variable.

HLPAZ, measured according to the test cycles and based on the weighting values contained in EN12053.

77

VDI 2198 – General Specifications, LPG powered GLP30VX, GLP35VX

Dis

tingu

ishi

ng m

ark

Wei

ghts

Tyre

s/ch

assi

sD

imen

sion

s P

erfo

rman

ce d

ata

Com

bust

ion

engi

neA

dditi

on d

ata

1.1

1.2

1.3

1.4

1.5

1.6

1.8

1.9

2.1

2.2

2.3

3.1

3.2

3.3

3.5

3.6

3.7

4.1

4.2

4.3

4.4

4.5

4.7

4.71

4.8

4.12

4.19

4.20

4.21

4.22

4.23

4.24

4.31

4.32

4.33

4.34

4.34.1

4.34.2

4.35

4.36

4.41

4.42

4.43

5.1

5.1.1

5.2

5.3

5.5

5.6

5.7

5.9

5.10

7.1

7.2

7.3

7.4

7.5

8.1

10.1

10.2

10.3

10.4

10.7

10.7.1

10.7.2

10.8

GLP 30VX GLP 35VXYale

Kubota 2.5LTechtronix 200, 2-Speed

ProductivityOil-immersedLPGSeated 3.0500483162343296619 / 7101802 / 2527SE28 x 9 - 156.50 x 102x / 29659676 / 5219514030553809218522061086390363326331186 / 1321 / 160150 x 120 x 1000III A10671321851000 × 1200 3955395541552277618207772740722.0 / 22.717.8 / 17.90.49 / 0.530.53 / 0.4719270 / 1080021800 / 1080018.5 / 26.15.4 / 4.6HydraulicKubota 2.5L43.925004 / 24913.2Hydrodynamic0 - 1556645.852.87896100Pin

Yale

PSI 2.4LStandard Electronic, 1-Speed

BaseDrum brakesLPGSeated 3.5500483170046467283 / 8631761 / 2885SE28 x 9 - 156.50 x 102x / 29659676 / 5219514030553809218522061086390373427341186 / 1321 / 160150 x 120 x 1000III A10671321851000 × 1200 4058405842582380647211172740719.1 / 20.319.1 / 20.30.53 / 0.550.53 / 0.4716905 / 1060019800 / 1060015.0 / 23.05.6 / 4.6HydraulicPSI 2.4L44.027004 / 23513.4Hydrodynamic0 - 1556245.852.87797101Pin

Yale

PSI 2.4LTechtronix 100, 1-Speed

ValueADS Drum or Oil-immersed LPGSeated 3.5500483170046467283 / 8631761 / 2885SE28 x 9 - 156.50 x 102x / 29659676 / 5219514030553809218522061086390373427341186 / 1321 / 160150 x 120 X 1000III A10671321851000 × 1200 4058405842582380647211172740719.1 / 20.319.1 / 20.30.53 / 0.550.53 / 0.4716905 / 1060019800 / 1060015.0 / 23.05.6 / 4.6HydraulicPSI 2.4L44.027004 / 23513.4Hydrodynamic0 - 1556245.852.87797101Pin

Yale

Kubota 2.5L Techtronix 100, 1-Speed

Productivity Oil-immersedLPGSeated 3.5500483170046467283 / 8631761 / 2885SE28 x 9 - 156.50 x 102x / 29659676 / 5219514030553809218522061086390373427341186 / 1321 / 160150 x 120 x 1000III A10671321851000 × 1200 4058405842582380647211172740717.8 / 18.217.8 / 18.20.56 / 0.560.53 / 0.4717230 / 1060019950 / 1060015.6 / 23.95.2 / 4.3HydraulicKubota 2.5L43.925004 / 24913.2Hydrodynamic0 - 1556645.852.87896100Pin

Yale

Kubota 2.5L Techtronix 200, 2-Speed Productivity Oil-immersedLPGSeated 3.5500483170046467283 / 8631761 / 2885SE28 x 9 - 156.50 X 102x / 29659676 / 5219514030553809218522061086390373427341186 / 1321 / 160150 x 120 X 1000III A10671321851000 × 1200 4058405842582380647211172740722.0 / 22.717.8 / 17.90.48 / 0.530.53 / 0.4719120 / 1060021800 / 1060016.4 / 23.95.6 / 4.7HydraulicKubota 2.5L43.925004 / 24913.4Hydrodynamic0 - 1556645.852.87896100Pin

u LWAZ, measured according to the test cycles and based on the weighting values contained in EN12053.

Base specification truck based on: 3290mm (GLP20/25VX) / 3105mm (GLP30/35VX) top of forks 2 stage LFL Standard carriage, 1000mm forks and manual levers.

Value and Productivity specification truck based on: 3290mm (GLP20/25VX) / 3105mm (GLP30/35VX) top of forks 2 stage LFL Standard carriage, 1000mm forks and manual levers.

For Value trucks fitted with manual levers, the values for lines 5.2 and 7.5 are as on the Base VDI table.

NACCO Materials Handling Limited trading as Yale Europe Materials Handling Centennial House, Frimley Business Park, Frimley, Surrey GU16 7SG, United Kingdom. Tel: +44 (0) 1276 538500 Fax: +44 (0) 1276 538559

www.yale-forklifts.euCountry of Registration: England. Company Registration Number: 02636775

Safety. This truck conforms to the current EU requirements. Specification is subject to change without notice.

Yale, VERACITOR and are registered trademarks. “PEOPLE, PRODUCTS, PRODUCTIVITY”, PREMIER, Hi-Vis, and CSS are trademarks in the United States and certain other jurisdictions. MATERIALS HANDLING CENTRAL and MATERIAL HANDLING CENTRAL are Service Marks in the United States and certain other jurisdictions. is a Registered Copyright. © Yale Europe Materials Handling 2015. All rights reserved.

Truck shown with optional equipment

Printed in The United Kingdom (0315HG) EN. Publication part no. 290000462 Rev.01

VX series

Yale Veracitor VX Series This series of trucks is available in three configurations.The Veracitor Base truck offers first-rate performance for a wide variety of applications, geared to minimise cost of acquisition without compromising performance.The Veracitor Value truck provides excellent performance and is optimised for lowest hourly operating cost. The Veracitor Productivity truck delivers maximum performance for medium to heavy duty applications with state-of-the art features and industry leading power.Engines Yale Veracitor truck is powered by a range of heavy duty industrial engines, designed to deliver power efficiently over a 20,000 hour design life with 500 hour service intervals. All engines feature Cast Iron Blocks and a 5 main bearing design; engines are fully isolated from the frame and axle to prevent direct transmission of noise and vibration, resulting in low vehicle noise and vibration levels.Variations in LPG fuel and its higher burning temperatures present challenges for converted Gasoline Engines and Yale has developed state of the art electronic fuel injection systems, which use closed loop control to maintain proper fuelling in all operating conditions.These advanced Industrial Engines feature coil over plug spark designs, and especially hardened intake and exhaust valve seats to ensure long operating life. The PSI 2.4L LPG engine delivers excellent performance combined with low fuel consumption and minimal noise. It has a robust design with a cast iron cylinder block and no plug wires, distributor caps or rotors.The high performance Kubota 2.5L LPG engine maximises performance and productivity for intensive operations, and with Cast Iron head and special 9.5 Litre Oil capacity is designed to do so reliably for the life of the truck. Advanced engine control s allow fuel mapping to be optimised to allow highly efficient operation in ECO–eLo (Fuel efficiency) mode, with minimum loss of performance. Masts The range of masts provides the driver with excellent visibility both through the mast and panoramically. The mast has a robust design and offers excellent rigidity particularly at full lift height. They are manufactured without compromise to provide robust and reliable performance, with minimal maintenance cost over the lifetime of the product. Transmission Four transmission selections are available with multiple engine configurations for a wide variety of material handling applications.1) Standard Electronic features electronic inching, electric shift control, neutral start switch, antirestart protection and heavy duty

clutch packs.2) The TechtronixTM 100 has all the Standard Electronic features plus an Auto Deceleration System.3) The TechtronixTM 200 has all the TechtronixTM 100 features, plus Two Speed Auto Shift (2 x forward, 1 x reverse).Load Sensing Hydraulics With AccuTouchTM electrohydraulic controls Load Sensing Hydraulics (LSH) delivers increased operational efficiency, offering a 15% reduction in fuel consumption on the VDI cycle, with no loss in productivity*. Variable displacement piston pumps match the flow rate and lifting speed continuously to the demands of the duty cycle. O-ring face seal fittings are used in all high pressure hydraulic connections. The engine therefore supplies power to the hydraulic pumps only when required, so more power is available for driving. With LSH Yale also offers an ECO-eLo (Fuel Efficiency) mode, reducing engine speed by 20% and optimising throttle response, so that the truck operates in the most economical power range. This results in a reduction in fuel consumption of a further 5%* but has a limited effect on overall truck productivity under application conditions. The ECO-eLo mode also delivers lower noise levels by up to 3dB(A). If a faster work rate, or higher productivity is required, the truck can easily be reprogrammed to HiP (High Performance) mode of operation through the dash display, with access secured by a unique customer password.Autospeed Hydraulics With Autospeed Hydraulics the engine speed is automatically increased to provide full hydraulic power. The Pacesetter VSM maintains the current travel speed (or prevents travel) until the operator steps on the accelerator. No operator inching is required and productivity and efficiency is increased by simplifying operator actions.Cooling System The cooling system employs a 43cm blade pusher type fan. A permanently lubricated water pump and a high capacity, cross-flow radiator ensures rapid heat dissipation. The sealed cooling system operates at 15psi, the coolant recovery tank allows visual inspection of coolant level. A transmission oil cooler is integrated into the radiator, located in the side tank. The optional combi-cooler radiator features an externally mounted transmission oil cooler for increased heat transfer capability. All radiators are soft mounted for durability.Drive Axle The drive axle is designed to withstand heavy duty applications and absorb shock loads. It is a “self-contained” assembly isolated from the transmission by a heavy-duty rubber isolator. The axle shafts utilize a “rolled fillet” root spline design for increased resistance to torsion stress. A magnetic sump plug collects any

metal particles circulating in the axle oil to prevent component wear.Brakes Brakes are duo-servo hydraulic, selfenergizing, and automatic adjusting drum brake assemblies.The Value and Productivity models have oil immersed brakes as standard. The single circuit master cylinder has a sealed fluid reservoir and features a fluid level sensor which activates an indicator light on the instrument panel.Hydraulic Power Steering Hydrostatic steering provides responsive control and eliminates mechanical linkages for reduced surface shock and simplified maintenance. The steering wheel is 30cm in diameter with a textured surface grip and spinner knob, and requires only four turns lock-to-lock. The centre mounted steer cylinder is located within the confines of the steer axle for protection.Steer Axle Constructed from cast steel, the steer axle is rubber shock mounted to the frame for reduced wear and vibration. The CSE (Continuous Stability Enhancement) system enhances lateral truck stability through reduced steer axle articulation, while simultaneously allowing uncompromised travel on uneven surfaces. Operator’s Compartment Base truck features cowl mounted hydraulic control levers as standard, positioned on the right side of the steering column. All models are available with AccuTouchTM mini-lever armrest, which features a contoured design, and – in addition to the hydraulic functions - features a horn and direction switch.The Full Suspension Seat together with the isolated powertrain provide best in class Whole-Body Vibration levels of 0.6m/s2, ensuring that the operator remains comfortable throughout the shift and fatigue, aches and pains are kept to a minimum. Automotive-style pedal arrangement with a large, single inch/brake pedal is standard. Intellix Vehicle System Management (VSM) VSM acts as a master truck controller, providing extensive monitoring and control of truck functions and systems. CANbus technology reduces wiring complexity and enables communications between truck systems. The dash display transmits continual feedback to the operator and allows communication of service codes. On-board diagnostics enable quick and easy troubleshooting. The electrical system features sealed connectors and Hall Effect sensors for superior dependability.(*Yale Productivity Test Cycle: Load Sensing Hydraulics is available on trucks with AccuTouchTM mini-levers and the ECO-eLo function is available on trucks with TechtronixTM transmissions only).

Models: LPG 20VX, LPG 25VX, LPG 30VX, LPG 35VX