VX - Avesco AG...GLP 20VX, GLP 25VX Mast details and capacity ratings (kg) - Superelastic tyres GLP...
Transcript of VX - Avesco AG...GLP 20VX, GLP 25VX Mast details and capacity ratings (kg) - Superelastic tyres GLP...
-
• Gold edition with extra accessories available as the new standard truck• High Visibility Masts and optional Side Shifting Fork Positioner• Intellix Vehicle Management System with CAN bus technology
• 3 application matched transmissions• Oil immersed brakes• AccuTouch mini levers and manual levers
LP Gas Forklift Trucks
VX series2,000kg / 2,500kg / 3,000kg / 3,500kg
-
2 VX series
PSI 2.4L, LPG Base, Value 4 Cylinder Overhead valveDisplacement 2.4 litre Power 44.0kW @ 2,700rpmTorque 164Nm @ 2,000rpmAir Filtration 2 stage, dry typeEmission Control Closed loop
Truck Dimensions
Engine Specifications
4.5h4
4.4h3
4.2h1
4.3h2
4.22s
4.1a
4.22l 1.8x
1.8x
4.19l1
l6
1.9y
4.20l2
4.20l2
4.12h10
1.6c 4.8h7
4.7h6
4.32m24.31m1
4.21b1b12
4.34.1/4.34.2Ast
100mma2 100mm
a2
4.35
Wa
Q
b
Kubota 2.5L, LPG Productivity 4 Cylinder Overhead valveDisplacement 2.5 litre Power 43.9kW @ 2,500rpm Torque 171Nm @ 1,800rpmAir Filtration 2 stage, dry typeEmission Control Closed loop
4.36b13
-
3
GLP 20VX, GLP 25VX Mast details and capacity ratings (kg) - Superelastic tyres
GLP 20VX, GLP 25VX Mast details and capacity ratings (kg) - Pneumatic Radial tyres
GLP 30VX, GLP 35VX Mast details and capacity ratings (kg) - Superelastic tyres
GLP 30VX, GLP 35VX Mast details and capacity ratings (kg) - Pneumatic Radial tyres
h1 (mm)
h1 (mm)
h1 (mm)
h1 (mm)
h2+s (mm)
h2+s (mm)
h2+s (mm)
h2+s (mm)
h3+s (mm)
h3+s (mm)
h3+s (mm)
h3+s (mm)
h4 (mm)
h4 (mm)
h4 (mm)
h4 (mm)
Tilt
Tilt
Tilt
Tilt
F
F
F
F
B
B
B
B
Mast
Mast
Mast
Mast
2 Stage LFL
2 Stage LFL
2 Stage LFL
2 Stage LFL
2 Stage FFL
2 Stage FFL
2 Stage FFL
2 Stage FFL
3 Stage FFL
3 Stage FFL
3 Stage FFL
3 Stage FFL
ModelTyre size, front Overall width, front
ModelTyre size, front Overall width, front
ModelTyre size, front Overall width, front
ModelTyre size, front Overall width, front
* With wide tread drive tyres (1317mm width) or dual drive tyres (1601 mm width) - required for this rating. h2 & h4 are less loadbackrest.
* With wide tread drive tyres (1321mm width) or dual drive tyres (1601 mm width) - required for this rating. ** Dual Drive tyres (1601 mm width) - required for this rating. h2 & h4 are less loadbackrest.
* With wide tread drive tyres (1317mm width) or dual drive tyres (1601 mm width) - required for this rating. h2 & h4 are less loadbackrest.
* With wide tread drive tyres (1321mm width) or dual drive tyres (1601 mm width) - required for this rating. ** Dual Drive tyres (1601 mm width) - required for this rating. h2 & h4 are less loadbackrest.
GLP 20 VX7.00 x 121157mm
GLP 20 VX7.00 R121157mm
GLP 30 VX28 x 9-151186mm
GLP 30 VX225 / 75R15
1186mm
GLP 25 VX7.00 x 121157mm
GLP 25 VX7.00 R121157mm
GLP 35 VX28 x 9-151186mm
GLP 35 VX225 / 75R15
1186mm
ForksLoad centre (kg)
ForksLoad centre (kg)
ForksLoad centre (kg)
ForksLoad centre (kg)
ForksLoad centre (kg)
ForksLoad centre (kg)
ForksLoad centre (kg)
ForksLoad centre (kg)
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
ISS & FPLoad centre (kg)
Integral SideshiftLoad centre (kg)
ISS & FPLoad centre (kg)
ISS & FPLoad centre (kg)
ISS & FPLoad centre (kg)
Integral SideshiftLoad centre (kg)
ISS & FPLoad centre (kg)
ISS & FPLoad centre (kg)
217024202770302021702020217024202620
217024202770302021702020217024202620
2195244527953045219520452195234524452695
2195244527953045219520452195234524452695
14014014014015581382158218322030
14014014014015581382158218322030
150150150150149513191519166917692015
150150150150149513191519166917692015
329037904330483033004350495055506000
329037904330483033004350495055506000
3105360541054605311040154615491552155815
3105360541054605311040154615491552155815
390444044944544439144938553861386588
390444044944544439144938553861386588
3809430948095309381046945294559458946494
3809430948095309381046945294559458946494
200020002000191020002000189017601660
20002000200019102000200018801760*1650*
3000300030002890300030002900284027402610*
3000300030002890300030002900*2830*2760*2610**
2500250025002400250025002370
2240* 2120*
2500250025002390*25002500*2370*2240**2130**
35003500350033903500350034003320*3250*2950*
350035003500334035003500*3400*3330**3250**3080**
192019101890180019201880176016301530
19201910189017901920188017601630*1520*
2820281027902690282028002700263025602400*
2820281027902690282028002700*2630*2550*2400**
2370236023502240238023802250 2110* 1990*
2370236023502240*23802380*2250*2110**1990**
33103300329031703310329031903110*3030*2860*
331033003290317033103290*3190*3110**3040**2860**
175017401730164017501720161014901400
17501740173016301750172016101490*1380*
2580257025602450258025602470241023402200*
2580257025602450258025602470*2400*2340*2190**
2170216021502040217021702060
1930* 1800*
2170216021502040*21702170*2060*1930**1810**
30303020301029003030301029202850*2780*2610*
303030203010289030303010*2920*2850**2780**2610**
200020001990189020001970185017201600
20002000199018902000197018501710*1600*
2970295029402830296029302830276026802510*
2970295029402820296029302830*2750*2680*2510**
2500250024802370250025002370
2220* 2090*
2500250024802360*25002500*2370*2220**2100**
349034803460334034903460335032603180*2970*
3490348034603340349034303350*3270**3190**3000**
184018301810172018401790168015601460
18401830181017201840179016801560*1450*
2700269026702570270026702580251024402290*
2700269026702570270026702580*2510*2440*2290**
2280227022502150228022802160
2020* 1900*
2280227022502150*22802280*2150*2020**1910**
318031703150304031803150305029802900*2730*
3180317031503040318031503050*2980**2900**2740**
168016801660158016901640154014301340
16801680166015701690164015401430*1330*
2480247024502350248024502370231022402100*
2480247024502350248024502370*2300*2240*2090**
2090208020701960209020901980
1850* 1740*
2090208020701960*20902090*1980*1860**1740**
292029102890278029202890280027302660*2500*
2920291028902780292028902800*2730**2670**2500**
666666666
666666666
6666666666
6666666666
555555555
555555555
5555555555
5555555555
-
VX series4
** Engine data based on max. capacity displacement. sTop of forks. :Without load backrest.
mh6 subject to +/- 5 mm tolerance. GLP20-25VX add 25mm when front tyre size 28x9-15 is selected.8Full suspension seat in depressed position.
qStandard/Wide/Dual. When wet axle selected values are (1186/1321/1601) for all capacities. w Add 32mm with load backrest.* at 1.6km/h.
** at 4.8km/h. ◊ Variable.HLPAZ, measured according to the test cycles and based on the weighting
values contained in EN12053.u LWAZ, measured according to the test cycles and based on the weighting values contained in EN12053.
VDI 2198 – General Specifications, LPG powered GLP20VX, GLP25VXD
istin
guis
hing
mar
kW
eigh
tsTy
res/
chas
sis
Dim
ensi
ons
Per
form
ance
dat
a C
ombu
stio
n en
gine
Add
ition
dat
a
Manufacturer (abbreviation)Manufacturer’s type designation
Engine/Transmission
Model Brake TypeDrive: electric (battery or mains), diesel, petrol, fuel gasOperator type: hand, pedestrian, standing, seated, orderpickerRated capacity / rated loadLoad centre distanceLoad distance, centre of drive axle to forkWheelbaseService weight Axle loading, laden front / rearAxle loading, unladen front / rearTyres: P = pneumatic, V = cushion, SE = superelastic Tyre size, frontTyre size, rearNumber of wheels, front/rear (x = driven wheels)Tread, frontTread, rearTilt of mast/fork carrige, forward / backward β Height, mast loweredFree lift tLift tHeight, mast extended :Height of overhead guard (cabin) mCab height (open cab) Seat height relating to SIP/stand height 8Coupling heightOverall lengthLength to face of forksOverall width qFork dimensions ISO 2331Fork carriage ISO 2328, class/type A, BFork carriage width wGround clearance, laden, below mastGround clearance, centre of wheelbaseLoad dimension b12 × l6 crossways Aisle width predetermined load dimensions Aisle width with pallets 1000mm x 1200mm crossways Aisle width with pallets 800mm x 1200mm lengthways Turning radiusInternal turning radius90° intersecting aisle (with pallet W = 1200mm, L = 1000mm)Step height (from ground to running board)Step height (between intermediate steps between running board and floor)Travel speed laden/unladenTravel speed, laden/unladen, backwards Lift speed, laden/unladen Lowering speed, laden/unladen Drawbar pull, laden/unladen *Maximum drawbar pull laden/unladen, Gradeability, laden/unladen ** Acceleration time, laden/unladenService brakeEngine manufacturer/typeEngine power according to ISO1585Rated speed Number of cylinders/displacementFuel consumtion according to VDI cycleType of drive unitOperating pressure for attachmentsOil volume for attachments ◊Hydraulic oil tank, capacityFuel tank, capacity Sound pressure level at the driver’s seat HSound power level during the workcycle u Guaranteed sound power 2000/14/ECTowing coupling, type DIN
Q (t)c (mm)x (mm)y (mm)kgkgkg
b10 (mm)b11 (mm)a / b (o)h1 (mm)h2 (mm)h3 (mm)h4 (mm)h6 (mm)(mm)h7 (mm)h110 (mm)l1 (mm)l2 (mm)b1(mm)s/e/l (mm)
b3 (mm)m1 (mm)m2 (mm)b12 x l6 (mm)Ast (mm)Ast (mm)Ast (mm)Wa (mm)b13 (mm)(mm)(mm)(mm)km/hkm/hm/sm/sNN%s
kWmin-1(-)/cm3
l/h or kg/h
barl/minlitreslitresdB(A)dB(A)dB(A)
Yale
PSI 2.4LElectronic Powershift
BaseDrum brakesLPGSeated 2.0500471162335635048 / 5161851 / 1712SE7.00 x 12 - 126.00 x 92x / 29659676 / 5217014032503904216021811061365348624861157 / 1317 / 160140 x 100 x 1000II A10671071601000 × 1200 3820382040202149629198770738217.3 / 18.017.3 / 18.00.61 / 0.630.58 / 0.5018720 / 1100022100 / 1100019.0 / 29.84.8 / 4.3HydraulicPSI 2.4L44.027004 / 23512.5Hydrodynamic0 - 1556245.852.87797101Pin
Yale
PSI 2.4LTechtronix 100, 1-Speed
ValueADS Drum or Oil-immersed LPGSeated 2.0500471162335635048 / 5161851 / 1712SE7.00 X 12 - 126.00 x 92x / 29659676 / 5217014032503904216021811061365348624861157 / 1317 / 160140 x 100 x 1000II A10671071601000 × 1200 3820382040202149629198770238217.3 / 18.017.3 / 18.00.61 / 0.630.58 / 0.5018720 / 1100022100 / 1100019.0 / 29.84.8 / 4.3HydraulicPSI 2.4L44.027004 / 23512.5Hydrodynamic0 - 1556245.852.87797101Pin
Yale
Kubota 2.5L Techtronix 100, 1-Speed
ProductivityOil-immersedLPGSeated 2.0500471162335635048 / 5161851 / 1712SE7.00 x 12 - 126.00 x 92x / 29659676 / 5217014032503904216021811061365348624861157 / 1317 / 160140 x 100 x 1000II A10671071601000 × 1200 3820382040202149629198770238216.7 / 17.016.7 / 17.00.62 / 0.640.58 / 0.5019085 / 1100022290 / 1100025.5 / 32.14.5 / 4.0HydraulicKubota 2.5L43.925004 / 24912.6Hydrodynamic0 - 1556645.852.87896100Pin
GLP 20VXYale
Kubota 2.5LTechtronix 200, 2-Speed
ProductivityOil-immersedLPGSeated 2.0500471162335635048 / 5161851 / 1712SE7.00 x 12 - 126.00 x 92x / 29659676 / 5217014032503904216021811061365348624861157 / 1317 / 160140 x 100 x 1000II A10671071601000 × 1200 3820382040202149629198770238220.8 / 21.216.3 / 16.60.58 / 0.610.58 / 0.5020875 / 1100021800 / 1100026.5 / 32.14.9 / 4.3HydraulicKubota 2.5L43.925004 / 24912.7Hydrodynamic0 - 1556645.852.87896100Pin
1.1
1.2
1.3
1.4
1.5
1.6
1.8
1.9
2.1
2.2
2.3
3.1
3.2
3.3
3.5
3.6
3.7
4.1
4.2
4.3
4.4
4.5
4.7
4.71
4.8
4.12
4.19
4.20
4.21
4.22
4.23
4.24
4.31
4.32
4.33
4.34
4.34.1
4.34.2
4.35
4.36
4.41
4.42
4.43
5.1
5.1.1
5.2
5.3
5.5
5.6
5.7
5.9
5.10
7.1
7.2
7.3
7.4
7.5
8.1
10.1
10.2
10.3
10.4
10.7
10.7.1
10.7.2
10.8
-
5
values contained in EN12053.u LWAZ, measured according to the test cycles and based on the weighting values contained in EN12053.
Base specification truck based on: 3290mm (GLP20/25VX) / 3105mm (GLP30/35VX) top of forks 2 stage LFL Standard carriage, 1000mm forks and manual
levers.Value and Productivity specification truck based on: 3290mm (GLP20/25VX) / 3105mm (GLP30/35VX) top of forks 2 stage LFL
Standard carriage, 1000mm forks and manual levers. For Value trucks fitted with manual levers, the values for lines 5.2 and 7.5 are as on the Base VDI table.
All values are nominal values and they are subject to tolerances. For further information, please contact the manufacturer. Yale products might be
subject to change without notice. Lift trucks illustrated may feature optional equipment. Values may vary with alternative configurations.
VDI 2198 – General Specifications, LPG powered GLP20VX, GLP25VX
Dis
tingu
ishi
ng m
ark
Wei
ghts
Tyre
s/ch
assi
sD
imen
sion
s P
erfo
rman
ce d
ata
Com
bust
ion
engi
neA
dditi
on d
ata
GLP 25VXManufacturer (abbreviation)Manufacturer’s type designation
Engine/Transmission
Model Brake TypeDrive: electric (battery or mains), diesel, petrol, fuel gasOperator type: hand, pedestrian, standing, seated, orderpickerRated capacity / rated loadLoad centre distanceLoad distance, centre of drive axle to forkWheelbaseService weight Axle loading, laden front / rearAxle loading, unladen front / rearTyres: P = pneumatic, V = cushion, SE = superelastic Tyre size, frontTyre size, rearNumber of wheels, front/rear (x = driven wheels)Tread, frontTread, rearTilt of mast/fork carrige, forward / backward β Height, mast loweredFree lift tLift tHeight, mast extended :Height of overhead guard (cabin) mCab height (open cab) Seat height relating to SIP/stand height 8Coupling heightOverall lengthLength to face of forksOverall width qFork dimensions ISO 2331Fork carriage ISO 2328, class/type A, BFork carriage width wGround clearance, laden, below mastGround clearance, centre of wheelbaseLoad dimension b12 × l6 crossways Aisle width predetermined load dimensions Aisle width with pallets 1000mm x 1200mm crossways Aisle width with pallets 800mm x 1200mm lengthways Turning radiusInternal turning radius90° intersecting aisle (with pallet W = 1200mm, L = 1000mm)Step height (from ground to running board)Step height (between intermediate steps between running board and floor)Travel speed laden/unladenTravel speed, laden/unladen, backwards Lift speed, laden/unladen Lowering speed, laden/unladen Drawbar pull, laden/unladen *Maximum drawbar pull laden/unladen, Gradeability, laden/unladen ** Acceleration time, laden/unladenService brakeEngine manufacturer/typeEngine power according to ISO1585Rated speed Number of cylinders/displacementFuel consumtion according to VDI cycleType of drive unitOperating pressure for attachmentsOil volume for attachments ◊Hydraulic oil tank, capacityFuel tank, capacity Sound pressure level at the driver’s seat HSound power level during the workcycle u Guaranteed sound power 2000/14/ECTowing coupling, type DIN
1.1
1.2
1.3
1.4
1.5
1.6
1.8
1.9
2.1
2.2
2.3
3.1
3.2
3.3
3.5
3.6
3.7
4.1
4.2
4.3
4.4
4.5
4.7
4.71
4.8
4.12
4.19
4.20
4.21
4.22
4.23
4.24
4.31
4.32
4.33
4.34
4.34.1
4.34.2
4.35
4.36
4.41
4.42
4.43
5.1
5.1.1
5.2
5.3
5.5
5.6
5.7
5.9
5.10
7.1
7.2
7.3
7.4
7.5
8.1
10.1
10.2
10.3
10.4
10.7
10.7.1
10.7.2
10.8
Q (t)c (mm)x (mm)y (mm)kgkgkg
b10 (mm)b11 (mm)a / b (o)h1 (mm)h2 (mm)h3 (mm)h4 (mm)h6 (mm)(mm)h7 (mm)h110 (mm)l1 (mm)l2 (mm)b1(mm)s/e/l (mm)
b3 (mm)m1 (mm)m2 (mm)b12 x l6 (mm)Ast (mm)Ast (mm)Ast (mm)Wa (mm)b13 (mm)(mm)(mm)(mm)km/hkm/hm/sm/sNN%s
kWmin-1(-)/cm3
l/h or kg/h
barl/minlitreslitresdB(A)dB(A)dB(A)
Yale
Kubota 2.5LTechtronix 200, 2-Speed
ProductivityOil-immersedLPGSeated 2.0500471162335635048 / 5161851 / 1712SE7.00 x 12 - 126.00 x 92x / 29659676 / 5217014032503904216021811061365348624861157 / 1317 / 160140 x 100 x 1000II A10671071601000 × 1200 3820382040202149629198770238220.8 / 21.216.3 / 16.60.58 / 0.610.58 / 0.5020875 / 1100021800 / 1100026.5 / 32.14.9 / 4.3HydraulicKubota 2.5L43.925004 / 24912.7Hydrodynamic0 - 1556645.852.87896100Pin
Yale
PSI 2.4LElectronic Powershift
BaseDrum brakesLPGSeated 2.5500471162339025778 / 6241782 / 2120SE7.00 x 12 - 126.00 x 92x / 29659676 / 5217014032503904216021811061365355925591157 / 1317 / 160140 x 100 x 1000II A10671071601000 × 1200 3887388740872216629202070738217.3 / 18.017.3 / 18.00.61 / 0.630.58 / 0.5018580/ 1145022000 / 1050016.0 / 29.05.1 / 4.4HydraulicPSI 2.4L44.027004 / 23512.7Hydrodynamic0 - 1556245.852.87797101Pin
Yale
PSI 2.4LTechtronix 100, 1-Speed
ValueADS Drum or Oil-immersed LPGSeated 2.5500471162339025778 / 6241782 / 2120SE7.00 x 12 - 126.00 x 92x / 29659676 / 5217014032503904216021811061365355925591157 / 1317 / 160140 x 100 x 1000II A10671071601000 × 1200 3887388740872216629202070238217.3 / 18.017.3 / 18.00.61 / 0.630.58 / 0.5018580/ 1145022000 / 1050016.0 / 29.05.1 / 4.4HydraulicPSI 2.4L44.027004 / 23512.7Hydrodynamic0 - 1556245.852.87797101Pin
Yale
Kubota 2.5L Techtronix 100, 1-Speed
Productivity Oil-immersedLPGSeated 2.5500471162339025778 / 6241782 / 2120SE7.00 x 12 - 126.00 x 92x / 29659676 / 5217014032503904216021811061365355925591157 / 1317 / 160140 x 100 x 1000II A10671071601000 × 1200 3887388740872216629202070238216.7 / 17.016.7 / 17.00.62 / 0.640.58 / 0.5018946 / 1050022150 / 1050021.8 / 28.04.7 / 4.1HydraulicKubota 2.5L43.925004 / 24912.8Hydrodynamic0 - 1556645.852.87896100Pin
Yale
Kubota 2.5L Techtronix 200, 2-Speed
Productivity Oil-immersedLPGSeated 2.5500471162339025778 / 6241782 / 2120SE7.00 x 12 - 126.00 x 92x / 29659676 / 5217014032503904216021811061365355925591157 / 1317 / 160140 x 100 x 1000II A10671071601000 × 1200 3887388740872216629202070238220.8 / 21.216.3 / 16.60.57 / 0.610.58 / 0.5020825 / 1050021800 / 1050022.7 / 28.05.1 / 4.4HydraulicKubota 2.5L43.925004 / 24912.9Hydrodynamic0 - 1556645.852.87896100Pin
-
VX series66
** Engine data based on max. capacity displacement. sTop of forks. :Without load backrest.
mh6 subject to +/- 5 mm tolerance. GLP20-25VX add 25mm when front tyre size 28x9-15 is selected.8Full suspension seat in depressed position.
qStandard/Wide/Dual. When wet axle selected values are (1186/1321/1601) for all capacities. w Add 32mm with load backrest.* at 1.6km/h.
** at 4.8km/h. ◊ Variable.HLPAZ, measured according to the test cycles and based on the weighting
values contained in EN12053.u LWAZ, measured according to the test cycles and based on the weighting values contained in EN12053.
VDI 2198 – General Specifications, LPG powered GLP30VX, GLP35VXD
istin
guis
hing
mar
kW
eigh
tsTy
res/
chas
sis
Dim
ensi
ons
Per
form
ance
dat
a C
ombu
stio
n en
gine
Add
ition
dat
a
Manufacturer (abbreviation)Manufacturer’s type designation
Engine/Transmission
Model Brake TypeDrive: electric (battery or mains), diesel, petrol, fuel gasOperator type: hand, pedestrian, standing, seated, orderpickerRated capacity / rated loadLoad centre distanceLoad distance, centre of drive axle to forkWheelbaseService weight Axle loading, laden front / rearAxle loading, unladen front / rearTyres: P = pneumatic, V = cushion, SE = superelastic Tyre size, frontTyre size, rearNumber of wheels, front/rear (x = driven wheels)Tread, frontTread, rearTilt of mast/fork carrige, forward / backward β Height, mast loweredFree lift tLift tHeight, mast extended :Height of overhead guard (cabin) mCab height (open cab) Seat height relating to SIP/stand height 8Coupling heightOverall lengthLength to face of forksOverall width qFork dimensions ISO 2331Fork carriage ISO 2328, class/type A, BFork carriage width wGround clearance, laden, below mastGround clearance, centre of wheelbaseLoad dimension b12 × l6 crossways Aisle width predetermined load dimensions Aisle width with pallets 1000mm x 1200mm crossways Aisle width with pallets 800mm x 1200mm lengthways Turning radiusInternal turning radius90° intersecting aisle (with pallet W = 1200mm, L = 1000mm)Step height (from ground to running board)Step height (between intermediate steps between running board and floor)Travel speed laden/unladenTravel speed, laden/unladen, backwards Lift speed, laden/unladen Lowering speed, laden/unladen Drawbar pull, laden/unladen *Maximum drawbar pull laden/unladen, Gradeability, laden/unladen ** Acceleration time, laden/unladenService brakeEngine manufacturer/typeEngine power according to ISO1585Rated speed Number of cylinders/displacementFuel consumtion according to VDI cycleType of drive unitOperating pressure for attachmentsOil volume for attachments ◊Hydraulic oil tank, capacityFuel tank, capacity Sound pressure level at the driver’s seat HSound power level during the workcycle u Guaranteed sound power 2000/14/ECTowing coupling, type DIN
Q (t)c (mm)x (mm)y (mm)kgkgkg
b10 (mm)b11 (mm)a / b (o)h1 (mm)h2 (mm)h3 (mm)h4 (mm)h6 (mm)(mm)h7 (mm)h110 (mm)l1 (mm)l2 (mm)b1(mm)s/e/l (mm)
b3 (mm)m1 (mm)m2 (mm)b12 x l6 (mm)Ast (mm)Ast (mm)Ast (mm)Wa (mm)b13 (mm)(mm)(mm)(mm)km/hkm/hm/sm/sNN%s
kWmin-1(-)/cm3
l/h or kg/h
barl/minlitreslitresdB(A)dB(A)dB(A)
Yale
PSI 2.4LElectronic PowershiftBaseDrum brakesLPGSeated 3.0500483162346126640 / 9721823 / 2789SE28 x 9 - 156.50 x 102x / 29659676 / 5219514030553809218522061086390363326331186 / 1321 / 160150 x 120 x 1000III A10671321851000 × 1200 3955395541552277618207772740719.1 / 20.319.1 / 20.30.53 / 0.550.53 / 0.4717054 / 1080019950 / 1080016.9 / 25.05.3 / 4.5HydraulicPSI 2.4L44.027004 / 23513.1Hydrodynamic0 - 1556245.852.87797101Pin
Yale
PSI 2.4LTechtronix 100, 1-Speed
ValueADS Drum or Oil-immersed LPGSeated 3.0500483162346126640 / 9721823 / 2789
SE28 x 9 - 156.50 x 102x / 29659676 / 5219514030553809218522061086390363326331186 / 1321 / 160150 x 120 x 1000III A10671321851000 × 1200 3955395541552277618207772740719.1 / 20.319.1 / 20.30.53 / 0.550.53 / 0.4717054 / 1080019950 / 1080016.9 / 25.05.3 / 4.5HydraulicPSI 2.4L
44.027004 / 23513.1Hydrodynamic0 - 1556245.852.8
7797101Pin
Yale
Kubota 2.5L Techtronix 100, 1-Speed
ProductivityOil-immersedLPGSeated 3.0500483162346126640 / 9721823 / 2789
SE28 x 9 - 156.50 x 102x / 29659676 / 5219514030553809218522061086390363326331186 / 1321 / 160150 x 120 x 1000III A10671321851000 × 1200 3955395541552277618207772740717.8 / 18.217.8 / 18.20.55 / 0.560.53 / 0.4717380 / 1080020100 / 1080017.6 / 26.14.9 / 4.2HydraulicKubota 2.5L43.925004 / 24913.0Hydrodynamic0 - 1556645.852.8
7896100Pin
GLP 30VXYale
Kubota 2.5LTechtronix 200, 2-Speed
ProductivityOil-immersedLPGSeated 3.0500483162346126640 / 9721823 / 2789
SE28 x 9 - 156.50 x 102x / 29659676 / 5219514030553809218522061086390363326331186 / 1321 / 160150 x 120 x 1000III A10671321851000 × 1200 3955395541552277618207772740722.0 / 22.717.8 / 17.90.49 / 0.530.53 / 0.4719270 / 1080021800 / 1080018.5 / 26.15.4 / 4.6HydraulicKubota 2.5L43.925004 / 24913.2Hydrodynamic0 - 1556645.852.87896100Pin
1.1
1.2
1.3
1.4
1.5
1.6
1.8
1.9
2.1
2.2
2.3
3.1
3.2
3.3
3.5
3.6
3.7
4.1
4.2
4.3
4.4
4.5
4.7
4.71
4.8
4.12
4.19
4.20
4.21
4.22
4.23
4.24
4.31
4.32
4.33
4.34
4.34.1
4.34.2
4.35
4.36
4.41
4.42
4.43
5.1
5.1.1
5.2
5.3
5.5
5.6
5.7
5.9
5.10
7.1
7.2
7.3
7.4
7.5
8.1
10.1
10.2
10.3
10.4
10.7
10.7.1
10.7.2
10.8
-
77
values contained in EN12053.u LWAZ, measured according to the test cycles and based on the weighting values contained in EN12053.
Base specification truck based on: 3290mm (GLP20/25VX) / 3105mm (GLP30/35VX) top of forks 2 stage LFL Standard carriage, 1000mm forks and manual
levers.Value and Productivity specification truck based on: 3290mm (GLP20/25VX) / 3105mm (GLP30/35VX) top of forks 2 stage LFL
Standard carriage, 1000mm forks and manual levers. For Value trucks fitted with manual levers, the values for lines 5.2 and 7.5 are as on the Base VDI table.
All values are nominal values and they are subject to tolerances. For further information, please contact the manufacturer. Yale products might be
subject to change without notice. Lift trucks illustrated may feature optional equipment. Values may vary with alternative configurations.
VDI 2198 – General Specifications, LPG powered GLP30VX, GLP35VX
Dis
tingu
ishi
ng m
ark
Wei
ghts
Tyre
s/ch
assi
sD
imen
sion
s P
erfo
rman
ce d
ata
Com
bust
ion
engi
neA
dditi
on d
ata
GLP 35VXManufacturer (abbreviation)Manufacturer’s type designation
Engine/Transmission
Model Brake TypeDrive: electric (battery or mains), diesel, petrol, fuel gasOperator type: hand, pedestrian, standing, seated, orderpickerRated capacity / rated loadLoad centre distanceLoad distance, centre of drive axle to forkWheelbaseService weight Axle loading, laden front / rearAxle loading, unladen front / rearTyres: P = pneumatic, V = cushion, SE = superelastic Tyre size, frontTyre size, rearNumber of wheels, front/rear (x = driven wheels)Tread, frontTread, rearTilt of mast/fork carrige, forward / backward β Height, mast loweredFree lift tLift tHeight, mast extended :Height of overhead guard (cabin) mCab height (open cab) Seat height relating to SIP/stand height 8Coupling heightOverall lengthLength to face of forksOverall width qFork dimensions ISO 2331Fork carriage ISO 2328, class/type A, BFork carriage width wGround clearance, laden, below mastGround clearance, centre of wheelbaseLoad dimension b12 × l6 crossways Aisle width predetermined load dimensions Aisle width with pallets 1000mm x 1200mm crossways Aisle width with pallets 800mm x 1200mm lengthways Turning radiusInternal turning radius90° intersecting aisle (with pallet W = 1200mm, L = 1000mm)Step height (from ground to running board)Step height (between intermediate steps between running board and floor)Travel speed laden/unladenTravel speed, laden/unladen, backwards Lift speed, laden/unladen Lowering speed, laden/unladen Drawbar pull, laden/unladen *Maximum drawbar pull laden/unladen, Gradeability, laden/unladen ** Acceleration time, laden/unladenService brakeEngine manufacturer/typeEngine power according to ISO1585Rated speed Number of cylinders/displacementFuel consumtion according to VDI cycleType of drive unitOperating pressure for attachmentsOil volume for attachments ◊Hydraulic oil tank, capacityFuel tank, capacity Sound pressure level at the driver’s seat HSound power level during the workcycle u Guaranteed sound power 2000/14/ECTowing coupling, type DIN
1.1
1.2
1.3
1.4
1.5
1.6
1.8
1.9
2.1
2.2
2.3
3.1
3.2
3.3
3.5
3.6
3.7
4.1
4.2
4.3
4.4
4.5
4.7
4.71
4.8
4.12
4.19
4.20
4.21
4.22
4.23
4.24
4.31
4.32
4.33
4.34
4.34.1
4.34.2
4.35
4.36
4.41
4.42
4.43
5.1
5.1.1
5.2
5.3
5.5
5.6
5.7
5.9
5.10
7.1
7.2
7.3
7.4
7.5
8.1
10.1
10.2
10.3
10.4
10.7
10.7.1
10.7.2
10.8
Q (t)c (mm)x (mm)y (mm)kgkgkg
b10 (mm)b11 (mm)a / b (o)h1 (mm)h2 (mm)h3 (mm)h4 (mm)h6 (mm)(mm)h7 (mm)h110 (mm)l1 (mm)l2 (mm)b1(mm)s/e/l (mm)
b3 (mm)m1 (mm)m2 (mm)b12 x l6 (mm)Ast (mm)Ast (mm)Ast (mm)Wa (mm)b13 (mm)(mm)(mm)(mm)km/hkm/hm/sm/sNN%s
kWmin-1(-)/cm3
l/h or kg/h
barl/minlitreslitresdB(A)dB(A)dB(A)
Yale
Kubota 2.5LTechtronix 200, 2-Speed
ProductivityOil-immersedLPGSeated 3.0500483162346126640 / 9721823 / 2789
SE28 x 9 - 156.50 x 102x / 29659676 / 5219514030553809218522061086390363326331186 / 1321 / 160150 x 120 x 1000III A10671321851000 × 1200 3955395541552277618207772740722.0 / 22.717.8 / 17.90.49 / 0.530.53 / 0.4719270 / 1080021800 / 1080018.5 / 26.15.4 / 4.6HydraulicKubota 2.5L43.925004 / 24913.2Hydrodynamic0 - 1556645.852.87896100Pin
Yale
PSI 2.4LElectronic Powershift
BaseDrum brakesLPGSeated 3.5500483170047997319 / 9801797 / 3002SE28 x 9 - 156.50 x 102x / 29659676 / 5219514030553809218522061086390373427341186 / 1321 / 160150 x 120 x 1000III A10671321851000 × 1200 4058405842582380647211172740719.1 / 20.319.1 / 20.30.53 / 0.550.53 / 0.4716905 / 1060019800 / 1060015.0 / 23.05.6 / 4.6HydraulicPSI 2.4L44.027004 / 23513.4Hydrodynamic0 - 1556245.852.87797101Pin
Yale
PSI 2.4LTechtronix 100, 1-Speed
ValueADS Drum or Oil-immersed LPGSeated 3.5500483170047997319 / 9801797 / 3002SE28 x 9 - 156.50 x 102x / 29659676 / 5219514030553809218522061086390373427341186 / 1321 / 160150 x 120 X 1000III A10671321851000 × 1200 4058405842582380647211172740719.1 / 20.319.1 / 20.30.53 / 0.550.53 / 0.4716905 / 1060019800 / 1060015.0 / 23.05.6 / 4.6HydraulicPSI 2.4L44.027004 / 23513.4Hydrodynamic0 - 1556245.852.87797101Pin
Yale
Kubota 2.5L Techtronix 100, 1-Speed
Productivity Oil-immersedLPGSeated 3.5500483170047997319 / 9801797 / 3002SE28 x 9 - 156.50 x 102x / 29659676 / 5219514030553809218522061086390373427341186 / 1321 / 160150 x 120 x 1000III A10671321851000 × 1200 4058405842582380647211172740717.8 / 18.217.8 / 18.20.56 / 0.560.53 / 0.4717230 / 1060019950 / 1060015.6 / 23.95.2 / 4.3HydraulicKubota 2.5L43.925004 / 24913.2Hydrodynamic0 - 1556645.852.87896100Pin
Yale
Kubota 2.5L Techtronix 200, 2-Speed Productivity Oil-immersedLPGSeated 3.5500483170047997319 / 9801797 / 3002SE28 x 9 - 156.50 X 102x / 29659676 / 5219514030553809218522061086390373427341186 / 1321 / 160150 x 120 X 1000III A10671321851000 × 1200 4058405842582380647211172740722.0 / 22.717.8 / 17.90.48 / 0.530.53 / 0.4719120 / 1060021800 / 1060016.4 / 23.95.6 / 4.7HydraulicKubota 2.5L43.925004 / 24913.4Hydrodynamic0 - 1556645.852.87896100Pin
-
Yale Veracitor VX Series Available in three configurations; Base - top performance for a variety of applications, minimised cost of acquisition.Value - excellent performance, lowest hourly operating cost. Productivity - maximum performance utilising state-of-the-art features.Engines A range of heavy duty engines with reliable power over 20,000 hour life cycle with 500 hour service intervals. Base and Value - The PSI 2.4L LPG engine delivers excellent performance combined with low fuel consumption and minimal noise. Productivity - The high performance Kubota 2.5L LPG engine maximises performance and productivity for intensive operations.Advanced engine controls allow fuel mapping to be optimised to allow highly efficient operation in ECO–eLo (Fuel efficiency) mode, with minimum loss of performance.Stage V compliance: To comply with Stage V regulations all trucks will be fitted with a catalytic convertor to treat the engine exhaust and bring it within the legal requirements.The change to stage V engines does not adversely affect the truck performance or productivity and acceleration and lifting/lowering speeds remain unchanged.Three Transmissions Electronic Powershift - Electronic inching and shift control, neutral start switch, anti-restart protection and heavy-duty clutch packs. Techtronix 100 - Electronic Powershift plus Auto Deceleration System (ADS), Controlled Power Reversal (CPR) and Controlled Roll-back (CRB).Techtronix 200 Techtronix 100 plus Two Speed Auto Shift and Extended Draw Bar Pull.Load Sensing Hydraulics (LSH) AccuTouch electrohydraulic controls (LSH)* deliver increased efficiency.
The engine supplies power to the variable displacement hydraulic pumps only when required. LSH has an ECO-eLo (Fuel Efficiency) mode, the truck operates in it’s economical power range. Faster work rate or higher productivity is available via HiP (High Performance) mode.(*Load Sensing Hydraulics is available on trucks with AccuTouch mini-levers, ECO-eLo function is available on trucks with Techtronix transmissions only).
Autospeed Hydraulics Automatically increases engine speed for full hydraulic power. Pacesetter VSM maintains travel speed (or prevents travel) until the accelerator is actuated; no inching is required, simplifying operator actions. Cooling System The cooling system employs a pushertype fan, water pump and high capacity, crossflow radiator to ensure rapid heat dissipation. Masts Full range of Yale 2 and 3 stage LFL and FFL masts. Brakes Base - Duo-servo hydraulic, self-energizing, with automatic adjustment.Value and Productivity - Sealed oil-immersed brake requiring minimal maintenance.Hydraulic Power Steering Responsive control, with the steer cylinder is located within the the steer axle for protection.Continuous Stability Enhancement (CSE) CSE improves lateral truck stability through reduced steer axle articulation, allowing travel on uneven surfaces. Operator’s Compartment Standard cowl mounted hydraulic control levers. All models are available with optional AccuTouch mini-levers plus horn and direction switch. Full Suspension Seat and isolated powertrain provide best in class Whole-Body Vibration levels for operator comfort.Automotive-style pedals with a large,
single inch/brake pedal are standard. Intellix Vehicle System Management (VSM) VSM master truck controller provides extensive monitoring and control of functions and systems.CAN bus wiring, sealed connectors and Hall Effect sensors reduces complexity for truck system communication. OptionslPremium monitoring packagelHigh air intake with pre-cleanerlAccumulatorlKeyless start (with auxiliary key switch)lTraction speed limiterlHeavy-duty “Combi Cooler” radiatorlReturn-to-set tiltlFoot directional controllAutospeed HydraulicslAlarm-reverselAmber strobe light lImpact monitorlLoad weight indicatorlPedestrian Awareness LightlPanoramic mirror
VX seriesModels: GLP 20VX, GLP 25VX, GLP 30VX, GLP 35VX
HYSTER-YALE UK LIMITED trading as Yale Europe Materials Handling Centennial House, Frimley Business Park, Frimley, Surrey GU16 7SG, United Kingdom.Tel: +44 (0) 1276 538500 Fax: +44 (0) 1276 538559www.yale-forklifts.eu
Publication part no. 220990296 Rev.03 Printed in The Netherlands (1019HG) EN. Safety: This truck conforms to the current EU requirements. Specification is subject to change without notice.
Yale, VERACITOR and are registered trademarks. “PEOPLE, PRODUCTS, PRODUCTIVITY”, PREMIER, Hi-Vis, and CSS are trademarks in the United States and certain other jurisdictions. MATERIALS HANDLING CENTRAL and MATERIAL HANDLING CENTRAL are Service Marks in the United States and certain other jurisdictions. is a Registered Copyright. © Yale Europe Materials Handling 2019. All rights reserved. Truck shown with optional equipment. Country of Registration: England and Wales. Company Registration Number: 02636775
To celebrate the continued success of the Veracitor truck, we are introducing the Gold Edition for 2 to 3.5 tonne trucks.The Yale Gold Edition VX Veracitor includes the following accessories as standard:• Vinyl Sears Air Suspension Seat• LED lights• Return to Set Tilt when e-hydraulics is ordered• Powertrain protection and Speed Limiter when Techtronix transmission is ordered• Operator Password function• Extended Warranty of 2 years/ 4000hours
Gold Edition