VOLVO TECHNICAL SPECIFICATION
-
Upload
brunosamaeian -
Category
Documents
-
view
219 -
download
0
Transcript of VOLVO TECHNICAL SPECIFICATION
7/23/2019 VOLVO TECHNICAL SPECIFICATION
http://slidepdf.com/reader/full/volvo-technical-specification 1/4
BHL 2004.02 1(4)
Backhoe Loader BL71
2 Engine
Make / Model / Product No. .............................Volvo D4DCBE2 Turbo
Idling speed, r/s (rpm)
– low...............................................................15.1 (900)
– high .............................................................39.9 (2380)
– hand throttle control position 1 ....................15.0 (900)
– hand throttle control position 2 ....................38.8 (2330)
Economic working range, r/s (rpm)..................20–26.7 (1200–1600)
Valve clearance
– inlet, mm (in) ...............................................0.35 (0.014) ± 0.05 (0.002)
– exhaust, mm (in) .........................................0.55 (0.022) ± 0.05 (0.002)
Lubricating oil pressure > 1100 rpm,MPa (psi) .........................................................0.45 (65.3)
3 Electrical system
System voltage, V............................................12
Alternator, output, kW (hp)...............................1.3
Alternator charging current intensity/voltage, A / V.................................................................95 / 14
Battery capacity, Ah.........................................110
4 Transmission
Model / Product No. ........................................Powershuttle with torque converter
Disengagement pressure, MPa (psi)
– neutral .........................................................0.03 (4.4)
– clutch pressure, high idling..........................1.1–1.3 (160–189)
– torque converter output pressure................0.05–0.9 (7.3–13.1)
– lubricating oil pressure ................................0.5 (72.5)
Drive axles
Model
– front .............................................................Steer axle
– rear..............................................................Non steer SAHR
7/23/2019 VOLVO TECHNICAL SPECIFICATION
http://slidepdf.com/reader/full/volvo-technical-specification 2/4
2(4) BHL 2004.02
BL71
5 Brakes
Service brakes, type ........................................Single circuit, oil immersed
– number of discs per side, rear.....................3
– number of brake counter discs, rear............4 – brake friction area per wheel, cm2 (in2).......178.4 (27.7)
– brake disc thickness, new, mm (in) .............4.8 (0.19)
– brake disc thickness, min., mm (in) .............4.4 (0.17)
– brake disc counter discs, new, mm (in) .......5.9 (0.23)
– maximum operating pressure MPa (psi) .....4.3 (624)
Parking brake, type..........................................Self adjusting oil immersed multidisc
6 Steering
Type.................................................................Load sensing hydrostatic
Flow (in common with working hydraulics)at 16.4 r/s (1000 rpm) (1152 Hz),litres/min. (US gal/min.) ...................................12.5 (3.3)
Max working pressure, MPa (psi) ....................17.5 (2538)
Operating time between full locks
at 16.7 r/s (1000 rpm) (1152 Hz), seconds......2.2Overload relief valves (shock valves),opening pressure, MPa (psi)............................24.0 (3480)
Air condition
Filling amount of refrigerant R134a,kg (lb)............................................................... 1.45 (3.2)
7/23/2019 VOLVO TECHNICAL SPECIFICATION
http://slidepdf.com/reader/full/volvo-technical-specification 3/4
BHL 2004.02 3(4)
BL71
9 Hydraulic system
Type.................................................................Variable flow, closed centre, loadsensing, flow sharing system
Hydraulic pumpType.................................................................Axial piston pump,variable displacement
Flow at 36.7 r/s (2200 rpm) and at apressure of 25 MPa (3626 psi)per minute, litres (US gal) ................................160 (42)
Return pressure MPa (psi)...............................0.8–1.0 (116–145)
Max working pressure, MPa (psi) ....................25 (3626)
Stand-by pressure function, MPa (psi) ............3.0 (435)
Displacement, cm3 (in3) ...................................74 (4.52)
Servo system
Type.................................................................Gear pump
Displacement, cm3 (in3) ...................................8 (0.5)
Flow at 36.7 r/s (2200 rpm), litres (US gal)......16 (4.2)
Servo pressure, MPa (psi) ...............................3.9 (566)
Main control valve
Type.................................................................Backhoe and loader valve block,10 spools. Optional valve blockto operate extendible dipper andmulti-purpose bucket, 2 spools.Compensated flow sharing.
Shock valves opening pressure, MPa (psi)
– A1 loader bucket .........................................30.0 (4351)
– B1 loader bucket .........................................30.0 (4351) – A2 slew movement......................................25.0 (3626)
– B2 slew movement......................................25.0 (3626)
– A3 boom......................................................26.0 (3771)
– B3 boom......................................................35.0 (5076)
– A6 dipper arm..............................................30.0 (4351)
– B6 dipper arm..............................................30.0 (4351)
– A7 backhoe bucket......................................30.0 (4351)
– B7 backhoe bucket......................................30.0 (4351)
– B10 multi-purpose bucket ...........................30.0 (4351)
7/23/2019 VOLVO TECHNICAL SPECIFICATION
http://slidepdf.com/reader/full/volvo-technical-specification 4/4
4(4) BHL 2004.02
BL71
Operating times, seconds
Operating times at 25 r/s (2200 rpm) (1725 Hz) with SAE load
Loader unit
– lifting............................................................4.5 – lowering.......................................................3.0
– forward tilting...............................................1.7
– backward tilting............................................1.9
Backhoe unit
– slew not including damping .........................1.6
– dipper arm out .............................................2.8
– dipper arm in ...............................................2.7
– bucket open.................................................1.7
– bucket close ................................................2.2
– boom up ......................................................3.9
– boom down..................................................4.1
– stabilisers, up ..............................................2.1
– stabilisers, down..........................................2.1
– extendible dipper arm, in.............................3.3
– extendible dipper arm, out...........................3.2
Tightening torques
See torque chart in Service Manual under Specifications.
Wheel nuts, Nm (lbf ft)
– front .............................................................300 ±15 (221 ±11)
– rear ..............................................................600 ±50 (443 ±37)
Service capacities, litres (US gal)
Engine incl. filter ..............................................13.0 ±0.5 (3.4 ±0.1)
Transmission ...................................................14.5 ±0.5 (3.8 ±0.1)
Front axle
– housing........................................................6.5 ±0.5 (1.7 ±0.1)
– hubs (in each) .............................................0.8 (0.2)
Rear axle
– housing........................................................13.0 ±0.5 (3.4 ±0.1) – hubs (in each) .............................................1.5 (0.4)
Hydraulic oil tank .............................................42.0 ±1.0 (11.1 ±0.3)
Fuel tank ..........................................................120.0 (31.7)
Cooling system ................................................15.0 (4.0)