VOLUME – IIIengineeringprojects.com/Tender/UploadFiles/2760_Vol--lll.pdf · 2018-07-27 ·...

TENDER NO: DLI/CON/684A/483

TENDER DOCUMENT

FOR

CONSTRUCTION OF BALANCE WORK FOR INSTITUTE BUILDING AND FIRE FIGHTING SYSTEM FOR NEW POLYTECHNIC INSTITUTE” (PKG– I) AT GUMLA, JHARKHAND.

VOLUME – III

PRICE BID/BOQ

EXECUTING AGENCY

ENGINEERING PROJECTS (INDIA) LIMITED (A GOVT. OF INDIA ENTERPRISE)

Core-3, Scope Complex, 7,Lodhi Road, New Delhi-110003

TEL NO: 011-24361666, FAX NO. 011- 24363426

AN ISO 9001 & ISO 14001 COMPANY

In figures In words In figures In words1 Civil Works ( As per SR JHARKHAND-2008) 52,112,105

2 Civil Works ( As per DSR 2007+10% CI) 8,091,510

3 Civil Works ( NON SCH) 543,126

4 Sanitary, water supply & swerage works ( As per SR JHARKHAND-2008)

1,329,064

5 Sanitary, water supply & sewerage works (As per DSR 2007+10% CI)

586,437

6 Sanitary, water supply & sewerage works (NON SCH)

5,040

7 Electrical( internal, external & sub station), Elevators and other ysytem Works ( NS/JR-2008 ITEM)

1,804,422

8 Electrical( internal, external & sub station), Elevators and other sytem Works (CPWD 2007 ITEM+CI-10%)

2,702,382

9 Fire fighting and Prevention system(NON SCH) 993,935

Total: 68,168,021

BIDDER'S FINANCIAL OFFER : Rs.

In Figures

Rs.SEAL In Words

SIGNATURE

% QUOTE ABOVE / BELOW / AT PAR

ENGINEERING PROJECTS(INDIA) LTDNIT NO:DLI/CON/684A/483

Note-The Rate in BOQ are Jharkhand Schedule of rate 2008 for Jharkhand Schedule Items, DSR-2007+10%CI for DSR Items and market rate for NS items.

Proposed Construction of Balance Work for Institute Building and Fire Fighting System for New Polytechnic Institute” (PKG– I) at Gumla, JharkhandQUOTING SHEET

SL.No. ITEM ESTIMATED COST

(IN Rs.)

BIDDER'S PRICE AMOUNT IN Rs. After adding percentage above/ below/ at par

Sl. No. PARTICULARS REVISED ESTIMATE

1 Civil Works ( As per SR JHARKHAND-2008) 52,112,105

2 Civil Works ( As per DSR 2007+10% CI) 8,091,510

3 Civil Works ( NON SCH) 543,126

4 Sanitary, water supply & swerage works ( As per SR JHARKHAND-2008) 1,329,064

5 Sanitary, water supply & sewerage works (As per DSR 2007+10% CI) 586,437

6 Sanitary, water supply & sewerage works (NON SCH) 5,040

7 Electrical( internal, external & sub station), Elevators and other sytem Works ( NS/JR-2008 ITEM) 1,804,422

8 Electrical( internal, external & sub station), Elevators and other sytem Works (CPWD 2007 ITEM+CI-10%) 2,702,382

9 Fire fighting and Prevention system(NON SCH) 993,935

10 Sub total 68,168,021

( Based on Schedule of rate of 2008 and D.S.R 2007 + 10 CI)

GENERAL ABSTRACT

NAME OF WORK : CONSTRUCTION OF BALANCE WORK OF NEW POLYTECHNIC INSTITUTE AT GUMLA (PKG-I), JHARKHAND

JSR DSR NON SCH

JSR DSR NON SCH

EARTH WORK

A1 JR.5.1.1 Earthwork in excavation in foundation trenches inordinary soil (vide classification of soil item A) anddisposal of excavated earth as obtained to a distanceupto 50M including all lifts, levelling, ramming thefoundation trenches, removing roots of trees, shrubsall complete as per approved design, buildingspecification and direction of E/I

0 Per M³ 39.67 0.00 0.00 0.00

A2 JR. 5.1.2 Extra for earthwork in hard soil as per specification and direction of E/I (vide classification of soil item B)

480 Per M³ 4.05 1944.00 0.00 0.00

A3 JR.5.1.7 Filling in foundation trenches and plinth in layersnot exceeding 150mm thick well watered, rammed,fully compacted and fine dressed with earth obtainedfrom excavation of foundation trenches within a leadof 50 M and lift of 1.5M all complete as per buildingspecification and direction of E/I (Mode ofmeasurement compacted volume)

1371 Per M³ 14.56 19961.76 0.00 0.00

A4 JR. 5.1.8 Filling in foundation trenches and plinth in layers notexceeding 150mm thick well watered, rammed, fullycompacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5M allcomplete as per building specification and direction ofE/I (Mode of measurement compacted volume)

680 Per M 33.79 22977.20 0.00 0.00

A5 JR. 5.1.9 Extra for each subsequent lead upto 25M beyond theinitial lead of 50M (Maximum upto 150M lead byhead load) as per specification and direction of E/I

200 Per M³ 3.50 700.00 0.00 0.00

A6 JR.5.1.10 Providing coarse clean sand in filling in foundationtrenches or in plinth including ramming and wateringin layers not exceeding 150 mm thick with all leadsand lifts including cost of all materials, labour, royalty and taxes all complete as per builiding specificationand direction of E/I (Mode of measurementcompacted volume)

697 Per M³ 112.27 78252.19 0.00 0.00

A7 JR 10.1.3 Jungle clearence including weeding out shrubs, smalltrees upto 150mm dia ( girth) and their removal as perspecification and direction of E/I

5200 Per sqm 2.41 12532.00 0.00 0.00

A8 DSR 2.33 Felling trees of the girth (measured at a height of 1mabove ground level) including cutting of trunks andbranches removing the roots and stacking ofserviceable material and disposal of unserviceablematerial.

a) DSR 2.33.1

Beyong 30cm girth upto and including 60 cm girth 3 each 81.70 0.00 245.10 0.00

b) DSR 2.33.2

Beyong 60cm girth upto and including 120 cm girth 3 each 359.80 0.00 1079.40 0.00

A9 DSR 2.34.1

Supplying chemical emulsion in sealed containerincluding delivery as specified: Chlorpyriphos/Lindane emulsifiable concentrate of 20%.

600 litre 174.30 0.00 104580.00 0.00

A10 DSR 2.35 Diluting and injecting chemical emulsion for postconstructional anti-termide treatment (excluding thecost of chemical emulsion):

CIVILREVISEDTotal

QuantitySl. No Item No Description of Items Unit Rate (in ` )

CIVIL Page 2 of 32

JSR DSR NON SCH

JSR DSR NON SCHQuantity

a) DSR 2.35.1.1

Along external wall where the apron is not providedusing chemical imulsion @ 7.5 litre / sqm of thevertical surface of the substructure to a depth of 300mincluding excavation channel along the wall androdding etc. complete: with Chlorpyriphos/ LindaneEC 20% with 1% concentration

285 meter 6.75 0.00 1923.75 0.00

b) DSR 2.35.2.1

Along external wall below concrete or masonry apronusing chemical imulsion @ 2.25 litre per linear meterincluding drilling and plugging holes etc.withChlorpyriphos/ Lindane emulsifiable concentrate of20% with 1% concentration.

100 meter 10.45 0.00 1045.00 0.00

c) DSR 2.35.3.1

Treatment of soil under existing floors using chemicalemulsion @ one liter per hole, 300mm apart including drilling 12mm diameter holes and plugging withcement mortar 1: 2 (1 cement : 2 coarse sand) tomatch the existing flooring.with Chlorpyriphos/ Lindane EC 20% with 1% concentration

2512 sqm 48.70 0.00 122334.40 0.00

MASONRY WORK

A11 JR.5.2.6 Providing designation 75B brick work in C.M. (1:6) infoundation and plinth with approved quality of cleancoarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials,raking out joints to 15 mm depth, curing taxes androyalty all complete as per building specification anddirection of E/I

178 Per M³ 1817.70 323550.60 0.00 0.00

A12 JR.5.2.14 Providing designation 75B Brick work in C.M. (1:6)in superstructure and plinth with approved quality ofclean coarse sand of F.M. 2 to 2.5 including providing10 mm thick mortar joints, cost of screening materials,scaffolding raking out joints to 15 mm depth, curingtaxes and royalty all complete as per buildingspecification and direction of E/I

1616 Per M³ 1858.48 3003303.68 0.00 0.00

A13 JR.5.2.23 Providing designation 125 mm thick reinforeddesignation 75A brick work in C.M (1:4) insuperstructure with approved quality of clean coarsesand of F.M. 2 to 2.5 including the cost of screening,carriage of materials, scaffolding raking out joints to15 mm depth, curing taxes and royalty (but excudingthe cost of reinforcement) all complete as per buildingspecification and direction of E/I)

1325 Per M² 262.46 347759.50 0.00 0.00

A14 JR.5.2.24 Providing 75mm thick reinforced designation 75ABrick work in cement mortar (1:4) in superstructurewith approved quality of clean coarse sand of F.M. 2to 2.5 including the cost of screening, carriage ofmaterials, scaffolding raking out joints to 15 mmdepth, curing taxes and royalty (excuding the cost ofreinforcement all complete as per buildingspecification and direction of E/I)

60 Per M² 157.46 9447.60 0.00 0.00

CONCRETE WORK

A15 DSR 4.1 Providing and laying in position cement concrete ofspecified grade excluding the cost of centering andshuttering- all work up to plinth level:

a) DSR 4.1.3 1:2:4 (1 cement : 2 coarse sand: 4 graded stoneaggregate 20mm nominal size)

20 cum 3257.45 0.00 65149.00 0.00

CIVIL Page 3 of 32

JSR DSR NON SCH


A16 JR.5.3.3 Providing P.C.C. M.100 with nominal mix of (1:3:6)in foundation with approved quality of stone metalgrade III (50 mm to 25 mm size) clean coarse sand ofF.M. 2.5 to 3 including screening, shuttering , mixingcement concrete in mixer and placing in position,vibrating, striking, curing taxes and royalty allcomplete as per building specification and direction ofEngineer-in-charge

293 Per M³ 2184.21 639973.53 0.00 0.00

A17 JR.5.3.4 Providing P.C.C. M.75 with nominal mix of (1:4:8) infoundation with approved quality of stone metal gradeIII (50 mm to 25 mm size) clean coarse sand of F.M.2.5 to 3 including screening, shuttering , mixingcement concrete in mixer and placing in position,vibrating, striking, curing taxes and royalty allcomplete as per building specification and direction ofEngineer-in-charge

0 Per M³ 1943.81 0.00 0.00 0.00

A18 JR 5.3.16.1

Providing and laying damp proof course 40mm thickwith cement concrete 1:2:4 (1cement :2coarse sand: 4graded stone aggregate 12.5mm nominal size)

195 sqm 100.87 19669.65 0.00 0.00

A19 JR.5.3.17 Providing 35mm, thick precast R.C.C.M. 150 withnominal mix of (1:2:4) shelves with approved qualityof stone chips of 12mm to 6 mm size graded and cleancoarses sand of F.M. 2.5 to 3 with 1.5mm cementpunning at top and side and 6mm. Cement plaster(1:4) at bottom including screening, curing andplacing the slab in position (but excluding the cost ofreinforcement) taxes and royalty all complete as perbuilding specification and direction of E/I

100 Per M² 209.00 20900.00 0.00 0.00

A20 JR.5.3.24 Providing 75X125mm R.C.C.M 150 with nominal mix of (1:2:4) Hand rail over brick railing with approvedquality of stone chips 20mm to 6mm, size graded andclean coarse sand of F.M 2.5 to 3 finished withcement plaster (1:4) with punning includingscreening,shuttering, mixing the concrete properly andplacing in position striking, curing and finished withrounded edges (but excluding the cost ofreinforcement) and taxes all complete as perspecification and direction of E/I

693 Per M 67.23 46590.39 0.00 0.00

A21 JR.5.3.25 Providing G.I. pipe hand rails with 40mm G.I pipe ofI.T.C or equivalent make properly fitted and fixed inposition to rail posts with all necessary accessoriesand taxes all complete, as per building specificationand direction of E/I

472 Per M 239.80 113185.60 0.00 0.00

A22 JR.5.3.27 Providing 50mm thick precast R.C.C.M 150 withnominal mix of (1:2:4) jali with approved quality ofstone chips 12mm and down well graded and cleancoarse sand of F.M 2.5 to 3 finished with1.6mm thickM.S wire as per approved drawing and design andplacing the same in position true to plumb and levelwith 6mm dia M.S. rods placed at regular intervalsboth horizontally and vertically as required properlygrouted with C.M (1:3) including cost of curing,scaffolding and finishing all complete as per buildingspecifications and direction of E/I

96 Per M² 244.06 23429.76 0.00 0.00

CIVIL Page 4 of 32

JSR DSR NON SCH


A23 JR. 5.3.5.1 Providing R.C.C.M-200 with nominal mix of (1:1:5:3)in foundation and plinth with approved quality stonechips 20mm to 6 mm size graded and clean coarsesand of F.M 2.5 to 3 including screening, shutteringmixing cement concrete in mixer and placing inposition, vibrating, striking, curing, (but excluding thecost of reinforcement) taxes and royalty all completeas per building specification and direction of Engineer-in-charge

0 Per M³ 3384.98 0.00 0.00 0.00

A24 JR. 5.3.6.1 Providing R.C.C.M-200 in band plinth level withapproved quality stone chips 20mm to 6 mm sizegraded and clean coarse sand of F.M 2.5 to 3including screening, shuttering mixing cementconcrete in mixer and placing in position, vibrating,striking, curing, (but excluding the cost ofreinforcement, taxes and royalty all complete as perbuilding specification and direction of Engineer-in-charge)

26 Per M³ 3739.49 97226.74 0.00 0.00

A25 JR. 5.3.8.1 Providing R.C.C.M-200 with nominal mix of (1:1:5:3)lintel with approved quality stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3including screening, shuttering mixing cementconcrete in mixer and placing in position, vibrating,striking, curing, (but excluding the cost ofreinforcement, taxes and royalty all complete as perbuilding specification and direction of Engineer-in-charge

88 Per M³ 4294.15 377885.20 0.00 0.00

A26 JR. 5.3.9.1 Providing R.C.C.M-200 with nominal mix of (1:1:5:3)in roof slab with approved quality stone chips 20mmto 6 mm size graded and clean coarse sand of F.M 2.5to 3 including screening, shuttering mixing cementconcrete in mixer and placing in position, vibrating,striking, curing, (but excluding the cost ofreinforcement) taxes and royalty all complete as perbuilding specification and direction of Engineer-in-charge)

1191 Per M³ 4337.19 5165593.29 0.00 0.00

A27 JR. 5.3.11 Providing R.C.C.M-200 with nominal mix of (1:1½:3)in beam of all types with approved quality stone chips20mm to 6 mm size graded and clean coarse sand ofF.M 2.5 to 3 including screening, shuttering mixingcement concrete in mixer and placing in position,vibrating, striking, curing, (but excluding the cost ofreinforcement) taxes and royalty all complete as perbuilding specification and direction of Engineer-in-charge)

687 Per M³ 4707.53 3234073.11 0.00 0.00

A28 JR. 5.3.14 Providing R.C.C.M-200 with nominal mix of (1:1½:3)in columns with approved quality stone chips 20mmto 6 mm size graded and clean coarse sand of F.M 2.5to 3 including screening, shuttering mixing cementconcrete in mixer and placing in position, vibrating,striking, curing, (but excluding the cost ofreinforcement) taxes and royalty all complete as perbuilding specification and direction of Engineer-in-charge

262 Per M³ 3904.11 1022876.82 0.00 0.00

A29 JR. 5.3.15.1

Providing av 63mm thick R.C.C.M - 200 with nominal mix of (1:1:5:3) chajja with approved quality of stonechips 20mm to 6 mm size graded and clean coarsesand of F.M 2.5 to 3 including screening, shutteringmixing cement concrete in mixer and placing inposition, vibrating, striking, 6mm cement plaster (1:4)in ceiling and sides of chajja with sand of F.M. 1.5curing (but excluding the cost of reinforcement) taxesand royalty all complete as per building specificationand direction of Engineer-in-charge)

35 Per M² 501.90 17566.50 0.00 0.00

CIVIL Page 5 of 32

JSR DSR NON SCH


A30 JR. 5.3.18.1

Providing R.C.C.M -200 with nominal mix of(1:1:5:3)in stair case with approved quality of stonechips 20mm to 6mm size graded and clean coarsessand of F.M. 2.5 to 3 including centering, shuttering,screening, mixing cement concrete in mixer, placing inposition, vibrating, striking, curing taxes and royaltyall complete, as per buildin specification and direction of Engineer-in-charge)

116 Per M³ 6647.10 771063.60 0.00 0.00

A31 DSR 5.11 Extra for additional height in centering, shutteringwhere ever required with adequate bracing, proppingetc. including cost of de-shuttering and decentering atall levels, over a height of 3.5 m for every additionalheight of 1 metre or part thereof (plan area to bemeasured)

2400 sqm 70.20 0.00 168480.00 0.00

WOOD WORK

A32 JR.5.4.13 Supplying, fitting and fixing 38 mm thick good qualitywell dressed well seasoned wood fully paneledshutters (frame made of sal wood and panels of sisumwood) in doors and windows with 25mmthick panelsincluding wedge over all clamps complete includingapplication of two coats of wood preservative ofapproved quality on the surface butting walls andlintels all complete as per building specification anddirection of E/I

157 Per M² 2075.16 325800.12 0.00 0.00

A33 JR.5.4.38 Supplying, fitting and fixing 35mm thick solid coretype non decorative single leaf flush shutters in doorsand windows with black board core blended with high quality phenol format dehyde synthetic resin bothside commercial veneered of standard make withoxidised iron fittings such as hinges, sliding doors,tower bolts, handles, cleats, sand blocks and taxes allcomplete as per building specification and direction ofEngineer - in- charge

93 Per M² 885.45 82346.85 0.00 0.00

A34 JR.5.4.39 Supplying, fitting and fixing 35mm thick solid coretype non decorative double leaf flush shutters indoors and windows with black board core blendedwith high quality phenol format dehyde syntheticresin both side commercial veneered of standard makewith oxidised iron fittings such as hinges, slidingdoors, tower bolts, handles, cleats, sand blocks andtaxes all complete as per building specification anddirection of Engineer - in- charge

189 Per M² 942.33 178100.37 0.00 0.00

A35 DSR 9.24 Extra for providing vision panel not exceeding 0.1sqm in all type of flush doors, (cost of glassexcluded)(overall area of door shutter to bemeasured) : Rectangular or square.

8 sqm 99.90 0.00 799.20 0.00

A36 non-schedule

Supplying, fitting and fixing glass panes includingsupplying putty beads and nails etc all complete asper building specification and direction of E/I: 4mmplain glass.

8 sqm 400.00 0.00 0.00 3200.00

A37 DSR 9.76 Providing and fixing bright finished brass 100mmmortice latch and lock with 6 levers and a pair oflever handles with necessary screws etc complete(best make of approved quality).

90 Each 332.65 0.00 29938.50 0.00

A38 DSR 9.62.2

Providing & fixing ISI marked oxidised MS slidingdoor bolts with nuts & screws etc. complete

250 x 16 mm 26 each 69.65 0.00 1810.90 0.00

CIVIL Page 6 of 32

JSR DSR NON SCH


STEEL WORK

A39 JR.5.5.1 Providing reinforcement of 6mm dia rods as perapproved design and drawing excluding carriage ofRods (straight or in coils) to work site, cutting,bending, and binding with annealed wire with cost ofwire, removal of rust, placing the rods in position allcomplete as per building specification and direction ofE/I a) 6mm dia Gr. A

2 Per MT 48732.30 85281.53 0.00 0.00

A40 JR.5.5.4 Providing Tor Steel reinforcement of 8mm dia rods asper approved design and drawing excluding carriageof Rods (straight or in coils) to work site, cutting,bending, and binding with annealed wire with cost ofwire, removal of rust, placing the rods on position allcomplete as per building specification and direction ofE/I TMT Fe 500.8 to 10 Tor

202 Per MT 54744.31 11058350.62 0.00 0.00

A41 JR.5.5.5 Providing Tor Steel reinforcement of 10mm,12mm &16mm dia rods as per approved design and drawingexcluding carriage of Rods (straight or in coils) towork site, cutting, bending, and binding with annealedwire with cost of wire, removal of rust, placing therods on position all complete as per buildingspecification and direction of E/I 12mm (TMT coilFe 500).

12mm (TMT bar Fe500) 56 Per MT 55431.39 3104157.84 0.00 0.0016mm (TMT bar Fe500) 96 Per MT 53822.99 5167007.04 0.00 0.00

A42 JR.5.5.6 Providing Tor Steel reinforcement of 20mm & 25mmdia bars as per approved design and drawingexcluding carriage of Rods (straight or in coils) towork site, cutting, bending, and binding with annealedwire with cost of wire, removal of rust, placing therods on position all complete as per buildingspecification and direction of E/I

a) TMT bar 20/25mm Fe 500 66 Per MT 52448.81 3461621.46 0.00 0.00b) TMT bar 28/32 mm Fe 500 0 Per MT 82935.96 0.00 0.00 0.00

A43 JR.5.5.12 Supplying, fittings and fixing M.S. grill made of20X6mm M.S. flat as per approved design anddrawing, properly fabricated with joints continousfillet welded & finished smoth, carriage of grill towork site, hoisting as per building specification anddirection of E/I.( where materials is not supplied bythe deptt.)

15250 Kg 51.19 780647.50 0.00 0.00

A44 JR.5.5.13 Providing and fixing fan hook of 16mm dia M.S. bar 1metre long bent to required size and shape, placed inposition and fixed in R.C.C slab/beam at the time ofcasting all complete as per building specification anddirection of E/I (where material is not supplied bydeppt.)

416 Each 89.60 37273.60 0.00 0.00

A45 JR.5.5.14 Supplying, fitting and fixing collapsible gate ofapproved size and make properly fabricated withvertical double channels 20X10X2mm at 100mmcentres and braced with M.S. flat diagonals20X3mm,with top and bottom rails of T iron40X40X6mm with 38mm dia steel pulleys completewith bolts, nuts, locking arrangements, stoppers,handles, including applying a priming coat of red leadpaint, carriage, hoisting and taxes all complete as perbuilding specification and direction E/I

8 Per M² 2301.36 19331.42 0.00 0.00

CIVIL Page 7 of 32

JSR DSR NON SCH


A46 JR.5.5.27 Supplying, fitting and fixing 40mm dia G.I pipe fittedand fixed in floor outlet to drain out water, in cementconcrete including cutting hole, making good the walland finishing, all complete as per buildingspecification and direction of E/I

250 Each 70.31 17577.50 0.00 0.00

A47 JR.5.5.18 Supplying, fitting and fixing fully glazed steel doorwindows or ventilations of standard rolled 'Z' andmullion steel sections and size as per IS 1038 jointsmet and welded with 100X16X3mm, M.S lugs fixedin cement concrete (1:2:4)blocks 15X10X10mmsizeincluding cost of oxidised iron fittings, withhings,handles per steps,catchsprings, 3mm thick plainglass panes with Aluminium beads and inner framefixed with lugs with 20mm long 6.3mm G.I countersunk machine screw and nuts and applying a coat ofred lead paint carriage to work site hoisting andplacing in all storeys and taxes all complete as perbuilding specification and direction of E/I

1200 Per M² 1886.07 2263284.00 0.00 0.00

A48 DSR 9.12 Extra for providing frosted glass panes 4mm thk.instead of ordinary glass panes 4mm thk indoors,windows, clerestory window shutters.

68 Sqm 10.45 0.00 710.60 0.00

A49 D.S.R. 10.23

Providing and fixing bright finished brass casementwindow fastners or peg stays to windows / ventilatorswith necessary welding and machine screws etc.complete

500 Kg 226.05 0.00 113025.00 0.00

A50 D.S.R. 10.13

Providing and fixing T-iron frames for doors, windowsand ventilators of mild steel Tee-sections, jointsmitred and welded with 15x3mm lugs 10cm longembedded in cement concrete blocks 15x10x10 cm.Of 1:3:6 (1 cement : 3 coarse sand: 6 graded stoneaggregate 20mm nominal size) or with wooden plugsand screws or rawl plugs and screws or with fixingclips or with bolts and nuts as required includingfixing of necessary butt hinges and screws andapplying a priming coat of approved steel primer.

4800 kilogram 51.15 0.00 245520.00 0.00

A51 DSR 10.25 Steel work welded in built up section /frameworkincluding cutting, hoisting , fixing in position andapplying a priming coat of approved steel primer usingstructural steel etc. as required.

DSR 10.25.2

In gratings, frames, guard bar, ladders, railings,brackets, gates and similar works

16500 kg 51.20 0.00 844800.00 0.00

A52 DSR 10.6 Supplying and fixing rolling shutters of approvedmake, made of required size M.S. laths interlockedtogether through their entire length and jointedtogether at the end by end locks mounted on speciallydesigned pipe shaft with brackets, side guides andarrangements for inside and outside locking with pushand pull operation complete including the cost ofproviding and fixing necessary 27.5 cm long wiresprings grade No. 2 and M.S. top cover of requiredthickness for rolling shutters.

DSR 10.6.2

80 x 1.20mm M.S. laths with 1.20 mm thick top cover 20 sqm 965.35 0.00 19307.00 0.00

A53 DSR 10.7 Providing and fixing ball bearings for rolling shutters 4 each 356.50 0.00 1426.00 0.00

CIVIL Page 8 of 32

JSR DSR NON SCH


A54 D.S.R. 9.84

Providing and fixing IS : 3564 marked aluminiumextruded section body tubular type universalhydraulic door closer with double speed adjustmentwith necessary accessories and screws etc. complete

90 each 911.00 0.00 81990.00 0.00

FLOORING WORK

A55 JR.5.6.1 Providing designation 75A one brick flat soling jointsfilled with local sand including cost of watering taxesroyalty all complete as per building specification anddirection of E/I

2563 Per M² 110.62 283519.06 0.00 0.00

A56 JR.5.6.9 Providing 50mm thick cement concrete flooring(1:2:4) with 20mm to 6mm, size graded stone chipsfinished with flooring coat of neat cement in panelsincluding cost of curing finishing the surface smoothby rubbing with carborandum stone, taxes androyalality with all complete as per buildingspecification and direction of E/I

153 Per M² 193.15 29551.95 0.00 0.00

A57 JR 5.6.10 Providing 12mm cement plaster (1:3) with cleancoarse sand of F.M 1.5 with floating coat of neatcement in skirting including rounding of junctionswith floor, curing, taxes and royalty all complete asper building specification and direction of E/I.

10 Per M² 87.89 878.90 0.00 0.00

A58 DSR.11.20 Chequered precast cement concrete tiles 22mm thickin footpath and courtyard jointed with neat cementslurry mixed with pigment to match the shade of tilesincluding rubbing and cleaning etc. complete on20mm thick bed of cement mortar 1:4(1 cement: 4coarse sand)

DSR 11.20.3

Dark shade using ordinary cement 890 Sqm 480.95 0.00 428045.50 0.00

A59 DSR.11.4 52 mm thick cement concrete flooring with concretehardener topping under layer 40 mm thick cementconcrete 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener of mix 1:2 (1 cementhardener mix : 2 graded stone aggregate 6 mmnominal size) by volume hardening compound ismixed @ 2 litre per 50 kg of cement or as permanufacturers specifications. This includes cost ofcement slurry, but excluding the cost of nosing ofsteps etc. complete

1480 sqm 286.55 0.00 424094.00 0.00

A60 JR 5.6.23.1

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointedwith grey cement slurry flush pointed with whitecement including rubbing polishing and cost ofcuring, taxes and royalty all complete as per buildingspecification and direction of E/I - with "A" gradewhite 15x15cm tiles

960 sqm 561.57 539107.20 0.00 0.00

A61 JR5.6.19 Providing and laying 15 to 23mm thick Kotah stoneslab flooring of approved size texture and colour over19mm thick base of lime mortar (1:1:1) ( lime putty:surkhi:coarse sand) laid over and jointed with greycement slurry mixed with pigement to match theshade of slab including rubbing and polishing togranolithic finish with approved quality ofcarborandom stone including cost of curing taxes androyalty all complete as per building specification anddirection of E/I

iii) 450x 450 size 3225 Per M² 855.22 2758084.50 0.00 0.00

CIVIL Page 9 of 32

JSR DSR NON SCH


A62 JR 5.6.20 Providing and laying 15 to 23mm thick Kotah stonetiles in risers of steps skirting and pillers of approvedsize texture and colour laid over 12mm thick cementmortar (1:3) and jointed with grey cement slurrymixed with pigement to match the shade of the slabincluding rubbing to grnolithic finish with approvedquality of carborandom stone including cost of curingtaxes and royalty all complete as per buildingspecification and direction of E/I-

475 Per M² 807.03 383339.25 0.00 0.00

A63 JR 5.6.14.2

Providing and laying hydraulically machine pressedterrazo tiles 20mm thick of approved texture withdown marble chips of approved shade size andquality, laid on 19mm thick bed of lime mortar (1:1:1)( lime: surki : sand) with neat cement slurry mixedwith pigment to match the shade of tiles betweenjoints, including rubbing and polishing to granolithicfinish with approved quality of carborandom stoneincluding cost of curing taxes and roality all completeas per building specification and direction of E/I.

Other colour excluding grey with 100% ordinarycement

2940 Per M² 517.47 1521361.80 0.00 0.00

A64 JR 5.6.16.2

Providing and laying hydraulically machine pressedprecast terrazo tiles 20mm thick in skirting ofapproved texture with 4mm down marble chips ofapproved shade size and quality, over 12mm thickcement plaster (1:3) base with neat cement slurrymixed with pigment to match the shade of tilesbetween joints, including rubbing and polishing togranolithic finish with approved quality ofcarborandom stone including cost of curing taxes androality all complete as per building specification anddirection of E/I.

Other colour excluding grey with 100% ordinarycement

205 Per M² 551.52 113061.60 0.00 0.00

A65 Non sch Providing and fixing homogeneous Polyvinyl chloridesheet/tile in flooring and skirting in approved patternon a smooth and damp proof base using rubber baseadhesives of approved quality and manufacturer likeDunlop S-758, Fevicol SR 998 or equivalent in

Non sch 2.0mm thick Tile. 171 Sqm 650.00 0.00 0.00 111150.00

A66 DSR.11.41.2

Providing and laying polished vitrified floor tiles indifferent sizes (thickness to be specified by themanufacturer) with water absorption's less than 0.08%and conforming to IS : 15622 of approved make in allcolours and shades, laid on 20 mm thick cementmortar 1:4 (1 cement : 4 coarse sand) includinggrouting the joints with white cement and matchsingpigments etc. complete

Size of tile 60 x 60 cm 1508 Sqm 1031.86 0.00 1556044.88 0.00

PLASTER WORK

A67 JR.5.7.3 Providing 12mm thick cement plaster (1:6) with cleancoarse sand of F.M 1.5 including screening, curingwith all leads and lifts of water, scaffolding taxes androyalty all complete as per building specification anddirection of E/I.

15000 Per M² 53.40 801000.00 0.00 0.00

A68 JR.5.7.7 Providing cement deep rulled pointing (1:3) withclean coarse sand of F.M 1.5 including screening,curing with all leads and lifts of water, scaffoldingtaxes and royalty all complete as per buildingspecification and direction of E/I.

3000 Per M² 51.21 153630.00 0.00 0.00

CIVIL Page 10 of 32

JSR DSR NON SCH


A69 JR.5.7.11 Providing 1.5mm cement punning including curing,carriage of water with all leads and lifts as perbuilding specification and direction of E/I

260 Per M² 20.26 5267.60 0.00 0.00

A70 JR.5.7.14 Providing 12mm thick water proof cement plaster(1:3) with clean coarse sand of F.M. 1.5 with 5% cicoor any other approved water proofing compoundincluding scrrening, curing with all leads and lifts ofwater, scaffolding taxes and royalty all complete asbuilding specification and direction of E/I

350 Per M² 72.58 25403.00 0.00 0.00

A71 JR.5.7.15 Providing 19mm thick water proof cement plaster(1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compoundincluding scrrening, curing with all leads and lifts ofwater, scaffolding taxes and royalty all complete asbuilding specification and direction of E/I

8200 Per M² 103.60 849520.00 0.00 0.00

A72 JR 5.7.6 Providing 6mm thick cement plaster (1:4) in cellingwith clean coarse sand of F.M 1.5 includingscreening, curing with all leads and lifts of water,scaffolding taxes and royalty all complete as perbuilding specification and direction of E/I.

11500 Per M² 53.71 617665.00 0.00 0.00

A73 JR 5.7.20 Extra for plaster work over exterior surface for eachconsequetive floors above first floor includding costof scaffolding etc. complete as per direction of E/I.

11800 Per M² 5.68 67024.00 0.00 0.00

FINISHING WORK

A74 JR.5.8.3 White washing three coats over new surface withapproved quality lime including cost of cleaningsurface thoroughly and removing the scales of smokeand mosh marks with jhama rubbing, scaffoldingwashing, of floors and taxes all complete as perbuilding specification and direction of E/I

12700 Per M² 5.16 65532.00 0.00 0.00

A75 JR.5.8.6 Colour washing twocoats over a coat of white washover new surface with approved quality lime includingcost of cleaning surface thoroughly and removing thescales of smoke and mosh marks with jhama rubbing,scaffolding washing, of floors and taxes all completeas per building

6200 Per M² 8.87 54994.00 0.00 0.00

A76 DSR.13.26 Providing and applying plaster of paris putty of 2 mm.thickness over plastered surface to prepare the surfaceeven and smooth complete

6500 sqm 47.20 0.00 306800.00 0.00

A77 JR.5.8.18 Providing two coats of oil bound distemper ofapproved shade and make over a coat of cementprimer over new surface including preparing theplastered surface by rubbing smooth with pumicestone or fine sand paper applying putty whereverrequired scaffolding washing of floors and taxes allcomplete as per building specification and direction ofE/I

6500 Per M² 42.68 277420.00 0.00 0.00

A78 JR.5.8.21 Providing two coats of plastic emulsion paint ofapproved shade and make over a coat of cementprimer over new surface including preparing plasteredsurface by rubbing smooth with pumice stone or finesand paper, applying putty wherever requiredscaffolding washing of floors and taxes all complete as per building specification and direction of E/I

1000 Per M² 77.64 77640.00 0.00 0.00

CIVIL Page 11 of 32

JSR DSR NON SCH


A79 JR.5.8.29 Providing two coats of painting with ready mixedpaint over a coat of primer of approved shade andmake over new wooden surface including preparingthe surface after cleaning, removing dirt scales,smokes, grease and sand preparing, including cost ofscaffolding and taxes all complete as per buildingspecification and direction of E/I

1200 Per M² 58.49 70188.00 0.00 0.00

A80 JR.5.8.43 Providing two coats of painting with ready mixedpaint of approved shade and make over steel surfaceincluding cleaning the surface thoroughly, scaffoldingand taxes all complete as per building specificationand direction of E/I

3250 Per M² 33.69 109492.50 0.00 0.00

A81 JR.5.8.46 Providing one coat of aluminium paint over steelsrface including cleaning the surface thoroughly,scaffolding and taxes all complete as per buildingspecification and direction of E/I

50 Per M² 42.15 2107.50 0.00 0.00

A82 13.48 Finishing walls with Deluxe Multi surface paintsystem for interiors and exteriors using Primer as permanufacturers specifications:

10200 sqm 62.25 0.00 634950.00 0.00

13.48.1 Two or more coats applied @ 1.25 ltr/10 sqm. Overand including one coat of Special primer applied @0.75 ltr / 10 sqm

MISCELLANEOUS WORK

A83 DSR 22.7 Providing and laying integral cement base waerproofing treatment including preparation of surface asrequired for treatment of roofs, balconies, terraces etcconsisting of following operations: a) Applying aslurry coat of neat cement using 2.75 kg/sqm ofcement admixed with watr proofing compoundconforming to IS : 2645 and approved by Engineer -in - charge over the RCC slab including adjoiningwalls up to 30 mm height including cleaning thesurface before treatment. b) Laying brick bats withmortar using broken bricks/brick bats 25 mm to115mm size with 50% of cement mortar 1:5 (1 cement: 5 coarse sand) admixed with water proofingcompound conforming to IS : 2645 and approved byEngineer - in - charge to require slope and treatingsimilarly the adjoining walls upto 300 mm heightincluding rounding the junctions of walls and slabs c)After two days of proper curing applying a secondcoat of cement slurry using 2.75 kg /sqm of cementadmixed with water proofing compound conformingto IS : 2645 and approved by Engineer - in charge.

d) Finishing the surface with 20 mm thick jointlesscement mortar of mix 1:4 (1cement : 4 coarse sand)admixed with water proofing compound conformingto IS:2645 and approved by Engineer - in -chargeincluding laying glass fibre cloth of approved qualityin top layer of plaster and finally finishing the sufacewith trowel with neat cement slurry and makingpattern of 300X300mm square 3mm deep. e) Thewhole terrace so finished shall be flooded with waterfor a minimum period of two weeks for curing and forfinal test. All above operations to be done in orderand as directed and specified by the Engineer-in-Charge:

DSR 22.7.1

With average thickness of 120 mm and minimumthickness at khurra as 65 mm.

2360 Per M² 541.50 0.00 0.00 1277940.00 0.00

CIVIL Page 12 of 32

JSR DSR NON SCH


A84 DSR 25.5 Providing and laying water proofing treatment insunken portion of WCs, bathroom etc., by applyingcement slurry mixed with water proofing cementcompound consisting of applying : a) First layer ofslurry cement @ 0.488 kg/sqm mixed with waterproofing cement compound @ 0.253 kg/sqm. Thislayer will be allowed to air cure for 4 hours.

b) Second layer of slurry of cement @ 0.242 kg/sqmmixed with water proofing cement compound @0.126 kg/sqm. This layer will be allowed to air to airto cure for 4 hoursfollowed with water curing for 48hours. The rate includes preparation of surface,treatment and sealing of all joints, corners, junctionsof pipes and masonary with polymer slurry.

505 sqm 143.85 0.00 72644.25 0.00

A86 JR.5.10.33 Providing 250mm wide brick drain in cement mortar(1:6) with av 150mm clear depth and 250mm, apronincluding cost of earthwork involved with 75mmcement concrete (1:4:3) over one brick designation75A flat soling in proper grade and slope at the basethe drain duly plastered in Cm.(1:3) with punningover exposed surface all complete as per buildingspecification and direction of E/I

290 Per M 514.21 149120.90 0.00 0.00

A86 DSR 12.40.2

Providing and fixing on wall face unplasticised - rigidP.V.C rainwater pipes conforming to IS: 13592. TypeA including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion:110mm diameter

525 metre 163.40 0.00 85785.00 0.00

A87 DSR 12.42 Providing and fixing on wall face unplasticised -P.V.C moulded fittings / accessories for unplasticised -Rigid P.V.C rain water pipes conforming to IS :13592 Type A including jointing with seal ringconforming to IS : 5382 leaving 10mm gap for thermalexpansion

a) 12.42.1.2 Coupler:110mm 35 each 101.65 0.00 3557.75 0.00b) 12.42.3.2 Single tee with door: 110x110x110mm 35 each 260.70 0.00 9124.50 0.00c) 12.42.5.2 Bend 87.5 o:110mm bend 35 each 134.20 0.00 4697.00 0.00d) 12.42.6.2 Shoe(plain):110mm Shoe 35 each 263.10 0.00 9208.50 0.00

A88 DSR 12.43.2

Providing and fixing unplasticised -PVC pipe clips ofapproved design to unplasticised -PVC rainwaterpipes by means of 50x50x50mm hard wood plugs ,screwed with MS screws of required length includingcutting brickwork and fixing in cement mortar 1:4( 1cement: 4 coarse sand) and making good the wall etc.complete.:110mm

525 each 96.90 0.00 50872.50 0.00

A89 DSR 12.44 Providing and fixing to the inlet mouth of rain waterpipe cast iron grating 15 cm diameter and weighingnot less than 440 grams.

35 each 23.40 0.00 819.00 0.00

A90 DSR 19.15 Providing M.S. foot rests including fixing in manholeswith 20X20X10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design.

75 each 149.85 0.00 11238.75 0.00

CIVIL Page 13 of 32

JSR DSR NON SCH


A91 DSR 8.10.1

Providing and fixing stone slab table rubbed, edgesrounded and polished of size 75 x 50 cm deep and 1.8cm thick fixed in urinal partitions by cutting a chaseof appropriate width with chase cutter and embeddingthe stone in the chase with epoxy grout or withcement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 6 mm nominal size) as perdirection of Engineer-in-charge and finished smooth.White Agaria Mrble Stone

18 sqm 2274.45 0.00 40940.10 0.00

A92 DSR 4.17 Making plinth protection 50mm thick of cementconcrete 1: 3: 6 ( 1 cement: 3 coarse sand :6 gradedstone aggregate 20 mm nominal size) over 75mm bedof dry brick ballast 40mm nominal size well rammedand consolidated and grouted with fine sand includingfinishing the top smooth.

300 sqm 222.65 0.00 66795.00 0.00

A93 non-schedule

Providing and laying 40mmx25mm (WxD) two-compound polysulphide based sealant compound of abase compound of liquid polysulphide polymer andan accelerator in expansion joints .The joints shall becleaned thoroughly and be completely free fromfrost,dirt,dust,oil,grease or any other loose materials.Appropriate primer suitable for porous surface likecement shall be applied on side of the joints .Fibrefiller board to be inserted to adjust the joints (Theapplication shall be strictly done as per specificationand direction of the manufacturer):Gungrade forhorizontal and vertical joints:40mm x25mm(WxD)

340 Rmt 794.00 0.00 0.00 269960.00

A94 DSR: 21.1 Providing and fixing aluminium work for doors,windows, ventilators and partitions with extrudedbuilt up standard tubular sections / appropriate Zsections and other sections of approved makeconforming to IS : 733 and IS : 1285, fixed with rawlplugs and screws or with fixing clips or withexpansion hold fasteners including necessary fillingup of gaps at junctions, at top, bottom and sides withrequired PVC / neoprene felt etc. Aluminium sectionsshall be smooth, rust free, straight, mitred and jointedmechanically wherever required including cleatangle.l Aluminium snap beading for glazing /panelling, C.P. brass / stainless steel screws allcomplete as per architectural drawings and thedirections of Engineer-in-charge. (Glazing andpanelling to be paid for separately)

a) DSR 21.1.1.1

For fixed portion : Anodised aluminium (anodisedtransparent or dyed to required shade according to IS : 1868. Minimum anodic coatring of grade AC 15)

300 Kg 290.45 0.00 87135.00 0.00

b) DSR 21.1.2.1

For shutters of doors windows & ventilatorsincludisng providing and fixing hinges / pivots andmaking provision for fixing of fittings whereverrequired including the cost of PVC / neoprene gasketrequired (Fittings shall be paid for separately). :Anodised aluminium (anodised transparent or dyed torequired shade according to IS : 1868. Minimumanodic coatring of grade AC 15)

500 Kg 310.45 0.00 155225.00 0.00

A95 DSR 21.3 Providing and fixing glazing in aluminiumdoors,window,ventilator shutters and partitions etc.with PVC/neoprene gasket etc. complete as per thearchitectural drawings and the directions of Engineer-in-Charge. (Cost of aluminium snap beading shall bepaid in basic item.)

CIVIL Page 14 of 32

JSR DSR NON SCH


a) DSR 21.3.2

With float glass panes of 5.50 mm thickness 50 sqm 673.55 0.00 33677.50 0.00

b) DSR 21.3.1

With float glass panes of 4.0 mm thickness 10 SQM 554.95 0.00 5549.50 0.00

A96 DSR.21.2 Providing and fixing 12 mm thick prelaminatedparticle board flat pressed three layer or graded woodparticle board conforming to IS : 12833 Grade L TypeII, in panelling fixed in aluminium doors, windowsshutters and partition frames with C.P.Brass / stainlesssteel screws etc. complete as per architecturaldrawings and directions of engineer-in-charge

DSR 21.2.2

Prelaminated particle board with decorativelamination on one side and balancing lamination onboth sides.

5 sqm 812.60 0.00 4063.00 0.00

A97 DSR 21.4 Providing and fixing double action hydraulic floorspring of approved brand and manufacture IS : 6315marked for doors including cost of cutting floors asrequired embedding in floors and cover plates withbrass pivot and single piece M.S. sheet outer box withside plate etc. complete as per the direction ofengineer-in-charge.

DSR 21.4.1

With stainless steel cover plate 8 each 1733.50 0.00 13868.00 0.00

A98 non sch Supplying and fixing ISI mark flush Aluminium doorlock (75mm ,without handle) with keys 6 levers,suitable for aluminium doors including fitting andfixing complete.

4 each 329.00 0.00 0.00 1316.00

A99 non sch Providing and laying terracota brick tile cladding(Veneer work) of insill,lintel, coping and claddingwall lining etc (Veneer) works over 25to 30 mmthickbed of cement mortar of ration 1:2 (1 cement : 2sand)including pointing in white cement mortar 1:2(1white cement: 2 stonedust) with an admixture ofpigment matching the brick shade. The workstoinclude the dash fasteners and cramps / MS angle35X35 X5 mm as perdetails and specifications.Thebrick tile to be done both in linearsurfaces and curvedsurfaces at all heights and depths scaffoldingshuttering all course patterns. The pointing to be weathered, thetliesurface to be laquer finished.All complete ascalled for as per drgspecs and instructon of EIC(please do refer to the cladding elevationand detail forquoting for the works, no extra claims willbeentertained in order to complete the work.Cementwill be issued free of cost from store, Contractor hasto maketheir own arrangement for transportation ofthe same from storeto work site.

210 Sqmt 750.00 0.00 0.00 157500.00

A100 DSR 21.7 Providing and fixing machine moulded aluminiumcovering of approved pattern & design made out ofmachine cut aluminium sheet and machine holed forreceiving screws, over expansion joints on verticalsurfaces / ceilings with full threaded cadmium platedsteel screws 4 mm dia stem, 30 mm long andaluminium washers 2 mm thick, 15 mm dia at astaggered pitch of 200 mm centre to centre includingdrilling holes in the receiving surface and providingexpandable plastic sleeves in holes etc. complete.

0.00 0.00 0.00

A101 DSR 21.7.1

nodised aluminium sheet 2.5 mm thick (anodisedtransparent or dyed to required shade according the IS1868, minimum anodic coating of grade AC 15)

800 kg 335.85 0.00 268680.00 0.00

CARRIAGE OF MATERIALS

CIVIL Page 15 of 32

JSR DSR NON SCH


A101 JR III/8 Bricks 8Km(1KM+7P) 840 1000 Nos 412.77 346916.67 0.00 0.00A102 JR III/ 11 Stone chips 10 Km. 2559 M3 172.61 441788.39 0.00 0.00A103 JR III/11 Sand 10Km 2417 M3 172.61 417248.43 0.00 0.00A104 JR III/5 Stone Metal - 10 Km. 0 M3 188.06 0.00 0.00 0.00

52112104.82

DSR AMOUNT 7355918.58

NON DSR AMOUNT in ` 543126.00

JSR AMOUNT in `

CIVIL Page 16 of 32

Sl. No Item No Description of Items Total Quantity

Unit JSR DSR NS JSR DSR NS

B1 JR.12.1.1.1 Earthwork in excavation (As per I.S.3114/1965 forlaying of different types and sizes of pipe so as togive one meter average coverover the socket of pipewith disposal of excavated earth within nitial leadand lift as per specification and direction ofEngineer -in-charge

a) For classificatin of Soil item -A 85 Per M³ 30.00 2,550.00b) For classification of soil item -B 20 Per M³ 40.00 800.00

B2 JR 12.1.1.2 Earth work in back filling the trenches after layingdifferrent types and size of pipe with earth removedduring excavation within initial lead and lift as perspecification and direction of Engineer -in-Charge(For Soil item - A & B) 20 Per M³ 25.00 500.00

B3 DSR 18.10 Providing and fixing GI pipes complete with GIfittings and clamps including cutting and makinggood the wall etc. ( internal wall )

Exposed on walla) DSR 18.10.1 15mm dia nominal bore 15 mtr 105.85 1,587.75b) DSR 18.10.2 20mm dia nominal bore 145 mtr 133.85 19,408.25c) DSR 18.10.3 25mm dia nominal bore 40 mtr 179.65 7,186.00d) DSR 18.10.4 32mm dia nominal bore 160 mtr 226.10 36,176.00e) DSR 18.10.5 40mm dia nominal bore 15 mtr 264.05 3,960.75f) DSR 18.10.6 50mm dia nominal bore 10 mtr 342.90 3,429.00

B4 DSR 18.11 Concealed pipe including painting with anticorrosive bitumastic paint , cutting chases andmaking good the wall

a) DSR 18.11.1 15mm dia nominal bore 120 mtr 144.75 17,370.00b) DSR 18.11.2 20mm dia nominal bore 250 mtr 170.15 42,537.50

B5 DSR 18.13 Making connection of GI distribution branch with GImain of following sizes by providing and fixing tee,including cutting and threating the pipes etc.complete.

a) DSR 18.13.1 25 to 40 mm nominal bores 6 each 166.05 996.30b) DSR 18.13.2 40 to 80 mm nominal bores 2 each 423.20 846.40

B6 DSR18.12 Providing and fixing GI pipes complete with GIfittings including trenching and refilling etc. (external work )

a) DSR18.12..7 65mm dia nominal bore 190 mtr 356.15 67,668.50b) DSR18.12.8 80mm dia nominal bore 10 mtr 458.15 4,581.50

B7 NON-SCH. Providing and fixing C.P. Spreader of approvedquality conforming to IS standareds : 15mm nominalbore 56 each 90.00 5040.00

B8 DSR 18.40 Painting GI pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality.

a) 18.40.1 15mm diameter pipes 135 metre 2.60 351.00b) 18.40.2 20mm diameter pipes 395 metre 3.05 1,204.75c) 18.40.3 25mm diameter pipes 40 metre 3.90 156.00d) 18.40.4 32mm dia diameter pipes 160 metre 4.55 728.00e) 18.40.5 40mm dia diameter pipes 15 metre 5.20 78.00f) 18.40.6 50mm dia diameter pipes 10 metre 6.10 61.00g) 18.40.7 65mm dia diameter pipes 190 metre 7.50 1,425.00h) 18.40.8 80 mm diametre pipe 10 metre 8.65B9 JR12.1.5.1 Providing and fixing male ended 15mm dia brass bib

cock of approved quality (Wt. not less than 350gms) with extra socket all complete as per specificationand direction of E/I 65 Each 221.86 14,420.90

B10 JR12.1.5.4 Providingand fixing15mm dia male ended C.I. Plugcock (Wt. not less than 400gms ) of approvedquality with extra socket all complete as perspecification and direction of E/I 30 Each 40.36 1,210.80

Rate (in `) Amount (in `.)SANITARY

SANITARY Page 17 of 32


Unit JSR DSR NS JSR DSR NSRate (in `) Amount (in `.)

B11 JR12.1.5.5 Providing and fixing 15mm dia male ended C.I.Push cock (Wt. not less than 400gms ) of approvedquality with extra socket all complete as perspecification and direction of E/I 12 Each 95.36 1,144.32

B12 JR 12.1.6 Providing and fixing brass/ C.I. Stop cock ofapproved quality all complete as per specificationand direction of E/I

(A) BRASS STOP COCK a) 15mm dia 25 Each 177.86 4,446.50

B13 JR 12.1.9 Providing and fixing 15mm dia and 45 cm longP.V.C. connection pipe with heavy quality brasscoupling at both ends etc. all complete as perspecification and direction of Engineer -in-charge

120 Each 67.86 8,143.20

B14 JR 12.1.11 Providing and fixing 15mm size C.P. brass pillarcock (Weight not less than 350gms) C.I. body brassspindle pillar cock of approved quality as perspecification and direction of Engineer -in-charge

b) C.I. body brass spindle 65 Each 177.86 11,560.90

B15 JR 12.1.12 Providing and fixing Gun metal full way valve ofapproved quality all complete as per specificationand direction if E/I

a) c) 25mm dia and weight not less than 500gms 2 Each 360.20 720.40b) d) 32mm dia and weight not less than 700gms 4 Each 505.83 2,023.32c) f) 50mm dia and weight not less than 1.50Kg 2 Each 1022.12 2,044.24

B16 DSR 18.17 Providing and fixing gun metal gate valve with CIwheel of approved quality (screwed ends)

DSR 18.17.5 65mm nominal bore 4 each 831.75 3,327.00DSR 18.17.5 80mm nominal bore 10 each 1369.25 13,692.50

B17 JR 12.1.16 Cutting drain width wise above G.L for laying GIpipes and restoring with brick in cement mortar(1:4) 12mm cement plaster in (1:4) with neatcement punning as per specification and direction ofEngineer-in-charge 2 Each 41.66 83.32

B18 JR 12.1.17 Cutting chajja or cornice for laying G.I. pipe andrestoring the same with R.C.C. (1:2:4) brick work incement mortar (1:4) and cement plaster (1:4) as perspecification and direction of Engineer-in-charge

50 Each 40.56 2,028.00

B19 JR 12.1.18 Making holes in walls for laying G.I. pipes andrestoring the same after pipe laying as perspecification and direction of E/I

a) 125mm thick wall 75 Each 35.63 2,672.25b) 250mm thick wall 24 Each 46.46 1,115.04

B20 JR 12.1.21 Supplying, fitting and fixing the following itemscomplete with all materials as specification anddirection of E/Ia) Glass shelf with C.P brass railii) 450mm X 125mm 65 Each 243.27 15,812.55b) Mirrors of 6 mm thick plate glass levelled edgemirror including C.P. brass revolving fittings 3mmply wood board and C.P. hinges to fix with mirror

ii) 450mm X 300mm 65 Each 751.96 48,877.40c)i) C.P. brass towel rail 20mmX600mm withbracket container 25 Each 366.96 9,174.00ii) C.P. brass soap dish container medium qualitywith screw and hinges etc. 25 Each 109.07 2,726.75




B21 JR RATE OF MATL. SL NO.42 ( PAGE 37)

Polythene water storage tank of ISImark(e.g.Sintex/Sinter/Himgiri etc.) with cover andlocking system.

20000per ltr

capacity 4.30 86,000.00

B22 JR 12.1.28 Supplying materials and labour for construction of600X600X90mm stop cock chamber of brickmasonary with 125mm thick work of designation75B in cement mortar (1:6) with 12mm thickcement plaster in C.M. (1:6) on inside only having50mm thick RCC cover having 12mm dia liftingrings, 2nos stop cock chamber will rest over 80mmthick P.C.c. (1:3:6) over one brick flat solingincluding cost of earthwork, all complete job, as perapproved design specification and direction of E/I

4 Each 1156.52 4,626.08

SANITARY INSTALLATIONB23 12.2.2 Supplying, fitting fixing 40mm high vitreous white

glazed earthen ware E.W.C. with 'p' trap of ParryHindustan or any other approved I.S.S. makeincluding fixing 15 litres C.I. mosquito proof lowdown flushing cistern of approved make withcomplete fittings with C.I. handle and R.S. orbrackets with telescopic flush pipe with brasscoupling and plumbers joints spindle stop cock ofapproved quality weight not less than 450grams15mm P.V.C. alkathene pipe 45cm long with brasscoupling at both ends and white /black plastic solidstate seal and lead of commander /cuckoo or otherI.S.S. make with hinges or screws etc. painting pipeand cistern etc. with 2 coats of approved paint overa coat of red oxide primer etc. all complete as perspecification and direction of E/I

(i) With "P" trapb) 10. litres low level PVC. cistern 29 Each 2505.03 72,645.87

B24 JR 12.2.1 Supplying, fitting fixing vitreous white glazedearthen ware I.W.C. of Parry Hindustan or anyother I.S.S. approved make with 100mm H.C.I. 'p'trap 15 litres C.I. pull and let go flushing cistern ofnames or other I.S.S. equivalent make, completewith all fittings, C.I. or C.C. brackets 32mmalkathene/P.V.C. telescope flush, pipe about 2Mlong with one brass coupling and clamps G.I. chainand pull including supplying and fixing a pair ofvitreous white glazed earthenware footrest to befixed in floor 15mm CI body brass spindle stop cock of weight not less than 50gm, 15mm P.V.Cconnection pipe 450mm long and the pipe andcistern with two coats of approved paint over a coatof red oxide primer etc. all complete as perspecification and direction of E/I

(B) 510mm longb) with 12.5Litre Low level C.I. cistern 16 Each 2604.58 41,673.28




B25 JR 12.2.3. Supplying, fitting and fixing flat back or angularlipped front vitreous white glazed earthen wareurinal of Hindustan "Parry" or any other approvedI.S.S. make with 5 litres capacity C.I. automaticflushing cistern of reliance for any other I.S.S.approved make with all fittings with C.I. or r.S.brackets, standard size G.I. flush pipe with fittingclamps, 15mm C.I. body brass spindle stop cock ofapproved quality weight not less than 400grams,15mm P.V.C. /Alkathene pipe 450mmlongwithbrass coupling at both ends and doing plumberjoints including painting of exposed part with twocoats of approved paint over a priming coat of redoxide, cutting wall and floor, making good the sameetc. all complete as per specification and directionof E/I)

a) Flat back or standing corner (600mmX350mm)56 Each 2169.98 121,518.88

B26 JR 12.2.4 Supplying, fitting and fixing vitreous white glazesearthen ware indian squating type 600 x 350mmurinal plate of parry, Hindustan or any other I.S.S.approved make with internal flushing rim, 100mmwhite glazed earthenware channel about 1m long 5litre capacity C.I. automatic flushing cistern ofreliance or any other approved make with fittingsR.S. or C.I. brachets 15mm and 45cm long PVC /Alkathene pipe standard G.I. flush pipe for back and front with spreader fittings and brass coupling etc.15mm C.I. body brass spindle stop cock weight notless than 450 grams. all complete including paintingof exposed parts with 2 coats of approved paint over a coat of red oxide primer and cutting the wall andfloor and making good the same as per specificationand direction of E/I)

a)600 X 350 mm size (Large) 20 Each 2211.33 44,226.60

B27 JR 12.2.5 Supplying, fitting and fixing vitreous white glazedearthen ware wash hand basin of parry orHindustan or any other I.S.S. approved makesupported on painted C.I. or R.S. brackets 32mmC.I. brass waste, 15mm dia C.I. body brass spindlestop cock of approved quality of weight not lessthan 350grams, 32mm P.V.C. waste pipe 750mmlong with brass coupling at one end and makingplumber joints etc. all complete as per specificationand direction of E/I

65 Each 1343.42 87,322.30

B28 DSR18.52.1 Providingand fixing CP brass stop cock ( concealed

) of standard design and of approved make

conforming to IS: 8931 15mm nominal bore 56 each 262.55 14,702.80

B29 DSR18.53.1 Providing and fixing CP brass angle valve for basinmixer and gyser point of approved qualityconforming to IS:8931 15mm nominal bore 110 each 347.65 38,241.50

B30 DSR 18.62 Providing and fixing PTMT Ball cock of approvedquality, colour and make complete with Epoxycoated aluminium rod with L.P/H.P. H. D. plasticball

DSR 18.62.5 50 mm nominal bore, 242 mm long Weighing notless than 1240 gms 45 each 1338.30 60,223.50




B31 JR 12.2.7 Supplying, fitting and fixing H.C.I. pipe with ear ofapproved make confirming to 1729 incudingsupplying nails and bobins short pieces, cuttingloose collars, lead and yarn for making lead caulkedjoints cutting pipes to size including earth work orscaffoldingwhere necessary etc. all complete as perspecification and direction of E/Ia) 100mm dia 750 Per M 538.23 403,672.50b) 75mm dia 50 Per M 399.86 19,993.00c) 50mm dia 30 Per M 305.62 9,168.60

B32 JR 12.2.8 Supplying and fixing H.C.I fittings of approvedmake conforming to I.S.S. 1729 including supplyignails and bobines lead and yarn from making leadcaulked joints including earth work or providingscaffolding as the case may be all complete as perspecification and direction of E/I

(A) H.C. I. single junction with door but without ear except socketi) 100mm dia (weight 10.5 Kg approx.) 54 Each 796.38 43,004.52ii) 80mm dia (Weight 7 Kg) 24 Each 652.96 15,671.04(B) H.C.I heel rest bend i) 100mm dia (weight 5.5 Kg approx.) 17 Each 461.55 7,846.35(C) 100mm dia H.C.i "P" trap with anti syphonage horn 28 Each 549.55 15,387.40(D) H.C.I. double junction with door and ear i) 100mm dia (weight 15.5 Kg approx.) 6 Each 988.20 5,929.20(G) H.C.I. Bend with door and ear i) 100mm dia (weight 6.5 Kg approx.) 24 Each 450.55 10,813.20ii) 80mm dia (Weight 4.5 Kg approx) 12 Each 345.42 4,145.04(J) Floor trap with gratingsa) 100mm dia 113 Each 384.55 43,454.15

(K) Norton patent H.C.I. Coweli) 100mm dia (weight 3.25 Kg approx.) 11 Each 373.55 4,109.05(L) H.C.I. Pass over a) 100mm dia 24 Each 478.05 11,473.20

B33 JR 12.2.12 Supplying materials and labour for painting theexposed H.C.I. pipes and fittings with 2 coats ofapproved paint over a coat of red oxide primer etc.all complete as per specification and direction of E/I

a) 50mm dia 30 Per M 12.69 380.70b) 80mm dia 46 Per M 19.51 901.36c) 100mm dia 596 Per M 23.41 13,945.34

SEWERAGE AND DRAINAGE

B34 JR 12.3.8 Supplying materials and labours for constructinginspection chamber of designation class 75B brickssize 750mm deep, 600x450mm internal dimensionhaving 250mm wall thickness in cement mortar(1:6) including 12mm cement plaster (1:4) withpunning on inside and cement plaster (1:6) with600X475mm G.I. Cover with frame (weight not lessthan 36kg) alongwith earth work in excavation and80mm thick P.C.C. (1:3:6) in foundation andrefilling all complete as per specification anddirection of E/I

30 Each 4303.41 129,102.30

B35 DSR 19.27.1 Constructing brick masonry road gully chamber50x45x60 cm with bricks of class designation 75 incement mortar 1:5 (1 cement : 5 coarse sand)including 500x450mm precast R.C.C horizontalgrating with frame complete as per standarddesign.With F.P.S. bricks 6 each 2248.35 13,490.10




B36 DSR-19.1 Providing , laying and jointing glazed stone warepipes grade 'A' with stiff mixture of cement mortarin the proportion of 1:1 ( 1cement :1 fine sand )including testing of joints etc .complete

19.1.2 150mm dia 250 mtr 151.65 37,912.5019.1.5 250mm dia 20 mtr 342.85 6,857.00

B37 DSR-19.2 Providing and laying cement concrete 1:5:10 (1cement : 5 coarse sand : 10 graded stone aggregate40mm nominal size )all round SW pipes includingbed concrete as per standard design

DSR 19.2.2 150mm diameter SW pipe 170 mtr 405.05 68,858.5019.2.5 250mm diameter SW pipe 15 mtr 546.00 8,190.00

B38 DSR 19.4 Providing and fixing square mouth SW gully trapGrade A complete with CI grating brick masonrychamber with water tight CI cover with frame of300x300mm size (inside) the weight of cover to benot less than 4.5kg and frame to be not less than2.7Kg as per standard design.

DSR 19.4.3.1 180x150mm size P type with FPS bricks class

designation 75 9 each 1036.75 9,330.75

B39 DSR19.6 Providing and laying non pressure NP2 class (lightduty) RCC pipes with collars jointed with stiffmixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand) including testing of joints etc.complete.

DSR 19.6.2 150mm dia R.C.C. pipe 60 mtr 202.85 12,171.00

B40 DSR 19.7 Constructing brick masonary manhole in cementmortar masonry manhole in cement mortar 1:4 (1cement : 4 coarse sand) R.C.C. slab with 1:2:4 mix(1 cement : 2 coarse sand : 4 graded stoneaggregate 20 mm nominal size), foundationconcrete 1:4:8 mix (1 cement : 4 coarse sand : 8graded stone aggregate 40mm nominal size) insideplastering 12 mm thick with cement mortar 1:3 (1cement : 3 coarse sand) finished with floating coatof neat cement and making channels in cementconcrete 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 20mm nominal size) finished with afloating coat of neat cement complete as perstandard design:

B41 DSR 19.7.1.1 Inside size 90X80 cm and 45 cm deep includingC.I. cover with frame (light duty) 455 X 610 mminternal dimensions total weight of cover and frameto be not less than 38 kg (weight of cover 23 kg andweight of frame 15 kg) 1 each 5383.70 5,383.70

B42 DSR 19.8.1 Extra for depth for manholes. For 90x80 Cm WithFPS bricks class designation 75 6.0 mtr 2654.00 15,924.00

B43 DSR 19.32.1 Making soak pit 2.5m diameter 3.0 m deep with 45x 45 cm dry brick honey comb shaft with bricks ofclass designation 75 and S.W drain pipe 100mmdiameter, 1.8m long complete as per standarddesign : with FPS bricks 1 each 9938.60 9,938.60

B44 DSR 19.19.3.1 Providing and fixing in position pre-cast R.C.C.manhole cover and frame of required shape andapproved quality - HD-20, Circular Shape 560mminternal dia 3 each 1110.30 3,330.90

B45 DSR 19.15.1 Replacement M.S. foot rests including fixing inmanholes with 20X20X10 cm cement concreteblocks 1:3:6 (1 cement : 3 coarse sand : 6 gradedstone aggregate 20 mm nominal size) as perstandard design . With 20x20mm square bar)

12.00 each 149.85 1,798.201329063.85

DSR AMOUNT ` 533124.25JR SCH AMOUNT `




NON DSR AMOUNT ` 5040.00


Sl. No SR CPWD 2007 No.

Description of Item Quantity Unit SR CPWD NON SCH./JR

NS/JR AMOUNT

SR CPWD AMOUNT

C1 1.8 WGPVCP Copper point wiring in PVC conduit: Wiring forlight point/ fan pt./ exhaust fan pt./ call bell pt. with1.5 sqmm FR PVC insulated copper conductorsingle core cable in recessed PVC conduit, withpiano type switch, phenolic laminated sheet, suitablesize MS box and earthing point with 1.5 sqmm FRPVC insulated copper conductor single core cableetc. as required:

a. 1.8.1 Group A 300 Pt. 264.00 79,200.00b 1.8.2 Group B 600 Pt. 305.00 183,000.00c 1.8.3 Group C 350 Pt. 397.00 138,950.00

C2 1.14 WGPVCSB Circuit/ Sub-main wiring in PVC conduit: Wiring forcircuit/ sub-main wiring along with earth wire withthe following sizes of PVC insulated copperconductor, single core cable in surface/ recessedPVC conduit as required. (for 5 amp plug pointwiring in recessed).

1.14.1 2 x 1.5 sqmm + 1x 1.5 sqmm earth wire 4500 Meter 71.00 319,500.00

C3 1.29 LPACCPT Supply and fixing light plug point piano typeaccessories: Supply and fixing metal box of150mm x 75mm x 60mm deep (nominal size) onsurface or in recessed with suitable size phenoliclaminated sheet cover in the front includingproviding and fixing 3pin 5/6 amp socket outlet and5/6 amp piano type switch, connection painting etc.as required.(For light plugs to be used only in non -residential buildings)

165 each 102.00 16,830.00

C4 1.12 WGPVCPP2

Power plug point wiring in PVC conduit (2 x4sqmm): wiring for light/power plug with2x4sqmm FR PVC insulated copper conductor,single core cable in surface/ recessed PVC conduitalong with 1no.4 sqmm FR PVC insulated copperconductor single core cable for loop earthing asrequired. 500 Meter 97.00 48,500.00

C5 1.14 WGPVCSB Circuit/ Sub-main wiring in PVC conduit: Wiring forcircuit/ sub-main wiring along with earth wire withthe following sizes of PVC insulated copperconductor, single core cable in surface/ recessedPVC conduit as required. (recessed).Other than 5 Amps.

1.14.1 2 x 1.5 sqmm + 1x 1.5 sqmm earth wire 3500 Meter 71.00 248,500.001.14.10 4 x 6 sqmm + 2x 6 sqmm earth wire 350 Meter 207.00 72,450.00

C6 1.30 PPACCPT Supply and fixing metal box of 180mm x 100 mm x60mm deep (nominal size) on surface or in recessedwith suitable size phenolic laminated sheet cover inthe front including providing and fixing 6pin 5/6 &15/16 amps socket outlet and 15/16 amps pianotype switch, connection painting etc. as required.

20 each 161.00 3,220.00

C7 Supplying, fitting and fixing of the followingcategories of light fittings.

a) N.Z.C. Rate 4'-40W Single box Fl fitting equivalent to TMC55/136 of Philips or equivalent including 1 x 40wFL Tube, starter, choke etc. 401 Each 615.80 246935.80

b) N.Z.C. Rate 2 x 4'-40W double box Fl fitting equivalent to TMC55/236 of Philips or equivalent including 2 x 40wFL Tube, starter, choke etc. 384 Each 872.60 335078.40

c) non-schedule 2 x 4'-40W double, FL. street light luminairequivalent to TRC 33/236 HPF of Philips orequivalent including 2 x 40w FL Tube, starter,choke etc. 4 Each 1950.00 7800.00

Rate Amount

ELECTRICAL Page 24 of 32

d) non-schedule 2X18W recess mounting type low glare luminarewith P5 lovre suitable for 2X 18 W PLL lampeqivalent to Philips FBS/300/218 P5, including lampetc. complete. 3 Each 2740.00 8220.00

e) non-schedule 2X36W recess mounting type low glare luminarewith P5 lovre suitable for 2X 36 W PLL lampeqivalent to Philips FBS/300/236 P5 HPF.includinglamp etc. complete. 3 Each 4300.00 12900.00

C7A non-schedule Supplying and fixing decorative ceilling fittingcomplete with 10" dia Al base plate, froasted glasscover, glass batten holder, 60W lamp as required

24 Each 390.00 9360.00

C8 non-schedule Supplying and fixing decorative optical batten forsurface mounting compact TL fitting complete with2X 18 W TLD lamp equivallent to TMC 500/218 ofPhillips 6 each 1085.00 6510.00

C9 non-schedule Supplying and fixing Decorative wall mounted PLfittings complete with 11watt PLS lamp and ballastsimilar to Phillips type FMC 300/111 (Phillips,Crompton, Bajaj) 9 each 555.00 4995.00

C10 non-schedule Supplying and fixing street light luminaries similarto Phillips type SRX 086/150 withn single piecedeep drawn AL housing with acrylic cover completewith 150 watt SV lamp and choke and 1.5m long40mm dia GI pipe with suitable bend and two sets ofMS clamp and bolt fixed on wall and painting etc.complete as required. (Phillips, Crompton, Bajaj)

6 each 5230.00 31380.00

C11 D.G.S.D. Rate Supplying and Transportation of followingcategories of ceiling fans/ exhaust fan complete withall accessories like down rod, regulator etc.

a) D.G.S.D. Rate 56" sweep ceiling fan for AC-230Voperation.(Crompton Greaves, Khaitan, Polar, Usha,ORTEM) 260 Each 994.14 258476.40

b) D.G.S.D. Rate 48" sweep ceiling fan for AC-230Voperation(Crompton Greaves, Khaitan, Polar, Usha,ORTEM) 86 Each 917.12 78872.32

c) JSR Supplying of 12" dia 1400 rpm A.C heavy dutyexhaust fan complete with louvers etc. as required(Polar, Crompton, Calcutta, Usha). 24 Each 1530.00 36720.00

d) non-schedule Supplying of 9" dia 1400 rpm A.C heavy dutyexhaust fan complete with louvers etc. as required(Polar, Crompton, Calcutta, Usha). 9 Each 1450.00 13050.00

C12 1.38 CALLBELL Supplying & Fixing call bell /buzzer suitable forDC/AC single phase, 230v complete as reqd. 7 Each 26.00 182.00

C13 non-schedule Supply and fixing 1.1KV grade PVC insulated andsheathed armoured aluminium conductor cable offollowing size cable either in trench or on surface/recessed by cutting trenches and refiling the samewith shifted soil after laying the cable and providingbricking protection.

a) 3.5 X 50 sq.mm 100 Metre 462.00 46200.00b) 3.5X 35 sq.mm 270 Metre 350.00 94500.00c) 4X 25 sq.mm 325 Metre 315.00 102375.00d) 4X 16 sq.mm 530 Metre 250.00 132500.00

C14 non-schedule Supplying and fixing compression type brass glandincluding finising the ends of PVC cable with ALlugs with crimping joints along with all accessoriesfor the following size of PVCA AL cable.

a) 3.5 X 50 sq.mm 2 set 180.60 361.20b) 3.5X 35 sq.mm 14 set 142.45 1994.30c) 4X 25 sq.mm 32 set 120.45 3854.40d) 4X 16 sq.mm 36 set 100.35 3612.60


C15 2.33 TPMCBDB Supplying and fixing following way, three pole andneutral, sheet steel, MCB distribution board, 415volts, on surface / recess, complete with tinnedcopper busbars, neutral busbar, earth bar, detachablegland plate, interconnections, phosphatized andpowder painted including earthing etc. as required,without MCB/ RCCB/ Isolator. ( general LDB)

a) 2.33.4 4 way (4 + 12), double door, horizontal type. 12 Each 1311.00 15,732.00b) 2.33.5 6 way (4 + 18), double door, horizontal type. 4 Each 1634.00 6,536.00

C15A 2.43 PWVTMCBDB

Supplying, installation, testing and commissioningof surface / recessed mounting, vertical type, 415V,pre-wired MCB distribution board of sheetsteel,dust protected, duly phosphetised and powderpainted, inclusive of 200A tinned Cu busbar, eathbar, common nutral link, dinbar for mountingMCB's, detachable gland/ knockout plate, and withbuilt in loose wire box and superior make terminalconnectors for all incoming and out going circuits,duly pre-wired with adequate size of FR PVCinsulated Cu conductor upto the terminal connectors/ nutral link and ready for installation of followingways ( without MCB and incommer) as required(Inside Lab).

2.43.5 4 way double door 6 Each 6717.00 40,302.00

C16 2.51 MCBB Supply and fixing 5amp. to 32 amp. rating 240V , 'B'series, miniature circuit breaker forlighting and other loads of following poles in existing MCB DBcomplete with connections, testing andcommissioning etc. as required.

a) 2.51.1 Single pole 210 Each 86.00 18,060.00

C17 2.55 MCBTPIS Supplying and fixing following rating, four pole, 415volts, isolator in existing MCB DB complete withconnections, testing and commissioning etc. asrequired:

a) 2.55.1 40 amps 16 Each 345.00 5,520.00b) 2.55.2 63 amps 1 Each 362.00 362.00c) non schedule Tripple pole 63A 6 Each 1204.00 7224.00d) non schedule Tripple pole 40A 24 Each 1043.00 25032.00

POWER DB & MCB FOR LABC18 2.43

PWVTMCBDBSupplying, installation, testing and commissioningof surface / recessed mounting, vertical type, 415V,pre-wired MCB distribution board of sheetsteel,dust protected, duly phosphetised and powderpainted, inclusive of 200A tinned Cu busbar, eathbar, common nutral link, dinbar for mountingMCB's, detachable gland/ knockout plate, and withbuilt in loose wire box and superior make terminalconnectors for all incoming and out going circuits,duly pre-wired with adequate size of FR PVCinsulated Cu conductor upto the terminal connectors/ nutral link and ready for installation of followingways ( without MCB and incommer) as required(Inside Lab).

a) 2.43.5 4 way double door 11 Each 6717.00 73,887.00b) 2.43.7 8 way double door 3 Each 10394.00 31,182.00

C18A 2.33 TPMCBDB Supplying and fixing following way, three pole andneutral, sheet steel, MCB distribution board, 415volts, on surface / recess, complete with tinnedcopper busbars, neutral busbar, earth bar, detachablegland plate, interconnections, phosphatized andpowder painted including earthing etc. as required,without MCB/ RCCB/ Isolator. ( general LDB)

2.33.4 4 way (4 + 12), double door, horizontal type. 13 Each 1311.00 17,043.002.33.5 6 way (4 + 18), double door, horizontal type. 1 Each 1634.00 1,634.00


C19 non schedule Supplying, installation, testing and commissioningof surface / recessed mounting vertical typecompartmentalised, 415V TPNMCBDB OF sheetsteel 1.6mm thick, dust protected, duly paintedinclusive of 200A tinned Cu busbar, eath bar, nutrallink, dinbar, detachable gland plate with incoming of100A TPN MCCB ( 16KA) and out going circuits,duly wired with adequate size of PVC insulated Cuwire between busbar & MCBs as well as incommerand upto the terminal connectors / nutral link offollowing ways ( without MCB) (floor DB for Labpower DB)

a) 4 way 7 Each 5810.00 40670.00C20 non schedule Supplying, installation, testing and commissioning

of surface / recessed mounting vertical typecompartmentalised, 415V TPNMCBDB OF sheetsteel 1.6mm thick, dust protected, duly paintedinclusive of 200A tinned Cu busbar, eath bar, nutrallink, dinbar, detachable gland plate with incoming of125A TPN MCCB ( 16KA) and out going circuits,duly wired with adequate size of PVC insulated Cuwire between busbar & MCBs as well as incommerand upto the terminal connectors / nutral link offollowing ways ( without MCB) (floor DB for Labpower DB)

a) 4 way 1 Each 7220.00 7220.00

C21 2.51 MCBB Supply and fixing 5amp. to 32 amp. rating 240V , 'B'series, miniature circuit breaker forlighting and other loads of following poles in existing MCB DBcomplete with connections, testing andcommissioning etc. as required.

a) 2.51.1 Single pole 288 Each 86.00 24,768.00b) 2.51.3 Tripple pole 30 Each 273.00 8,190.00c) non schedule Tripple pole and neutral 63A 28 Each 1575.00 44100.00d) non schedule Tripple pole 63A 32 Each 1204.00 38528.00

C22 2.62 MCBDPSOC20

S/F 20A, 240V SPN MCB industrial socket outlet :S/F 20A 240V SPN industrial type socket out letwith two pole and earth metal enclosed plug topalong with 20A C series SP MCB in sheet steelenclosure on surface or in recess with chained metalcover for the socket outlet and complete withconnection , testing and commissioning etc. asrequired.

60 Each 520.00 31,200.00

C23 2.64 MCBTPSOC30

S/F 30A TPN MCB industrial socket outlet : S/F30A 400V TPN industrial type socket out let withfour pole and earth metal enclosed plug top alongwith 30A C series TP MCB in sheet steel enclosureon surface or in recess with chained metal cover forthe socket outlet and complete with connection ,testing and commissioning etc. as required.

32 Each 1294.00 41,408.00

C24 1.5 WGSTLPP2 Wiring for light/power plug with 2x4sqmmFRPVC insulated copper conductor, single core cablein surface steel conduit along with 1no.4sqmm FRPVC insulated copper conductor single core cablefor loop earthing as required 3700 Meter 136.00 503,200.00

C25 1.30 PPACCPT Supply and fixing metal box of 180mm x 100 mm x60mm deep (nominal size) on surface or in recessedwith suitable size phenolic laminated sheet cover inthe front including providing and fixing 6pin 5/6 &15/16 amps socket outlet and 15/16 amps pianotype switch, connection painting etc. as required.

111 each 161.00 17,871.00


C26 1.7 WGSTLSB Copper sub main wiring in steel conduit: wiring forsub-main wiring with the following size of PVCinsulated, copper conductor, single core cable insurface steel conduit as required:

a) 1.7.10 4 x 6 sqmm + 2x 6 sqmm earth wire 650 Meter 258.00 167,700.00

C27 1.41 ITCFFSUR ITC fluroscent fitting directly on surface withcopper wiring: Installation, testing andcommissioning of prewired, flourescent fittings ofall types complete with all accessories and tube etc.directly on ceiling/wall including connections with1.5 sq.mm FR PVC insulated, copper conductor,single core cable and earthing etc. as required

208 Each 43.00 8,944.00

C28 1.42 ITCFFDR ITC fluroscent fitting with down rods and copperwiring: Installation, testing and commissioning ofprewired, flourescent fittings of all types completewith all accessories and tube etc. including supplyand fixing ball and socket arrangement, 2nos. downrods of 20mm dia x 1.6mm thick steel conduit upto30cm. length painting and wiring the down rod andconnection with 1.5sqmmfFR PVC insulated Cuconducter single core cable and earthing etc. asrequired.

600 Each 126.00 75,600.00

C29 1.43 EXTDR P/F extra down rod with copper wiring: Providingand fixing extra conduit down rod of 20 mm dia. 2 X10 cm length with 2 X 1.5 sq.mm FR PVC insulated, copper conductor , single core cable includingpainting etc. as required (Note: more than 5 cmlength shall be rounded to the nearest 10 cm. and 5cm. or less shall be ignored).

1000 Each 17.00 17,000.00

C30 1.45 ITCCFFC Installation, testing and commissioning of ceilingfan including wiring the downrod of standard length(upto 30cm) with 1.5 sq.mm FR PVC insulated,copper conductor, single core cable including P/Fphenolic laminated sheet cover on the fan box etc.as reqd. 325 Each 68.00 22,100.00

C31 1.49 EXTPIP20 S/F extra down rod of 10cm length GI pipe 20mmdia heavy gauge including painting etc. as required.

400 Each 14.00 5,600.00

C32 1.51 NUMFANFT

Numbering of ceiling fan/exhaust fan/FL fitting etc.362 Each 10.00 3,620.00

C33 1.52 ITCEF450 Installation of exhaust fan upto 450mm sweep in theexisting opening, including making the hole to suitthe size of the above fan, making good the damage,connections, testing, commissioning etc. as required.

37 Each 223.00 8,251.00

C34 1.54 LOUSHEF Fixing louvres /shutters for exhaust fan:Extra forfixing the louvres /shutters complete with frames forexhaust fans of all sizes 37 Each 65.00 2,405.00

C35 non schedule Fixing only out door street light type Fl / MV lightfitting complete with all accessories like S/F 40mmdia GI pipe Class B 1.5m Av. Length having suitablebend including S/F MS clamp, PVC Cu wire andmaking connection including making good thedamages and painting etc. 10 each 405.25 4052.50

C36 1.21pvccon Supply and fixing of following sizes of PVC conduitalong with the accessories in recessed includingpainting incase of surface conduit, or cutting thewall and making good the same in case of recessedconduit as required:


a) 1.21.1 20 mm 500 Meter 41.00 20,500.00b) 1.21.2 25 mm 100 Meter 47.00 4,700.00

C37 non schedule Providing and drawing two pair 0.5 ATC telephonecable in the existing conduit including connection asrequired 1000 Meter 25.00 25000.00

C38 non schedule Providing and fixing telephone socket out let in100x100x 50 MS box recessed in wall with backelitetop cover including connection and making good thedamages 20 set 120.00 2400.00

C39 non schedule Providing and fixing telephone junction box ofkrone type with MS enclosure including connectionas required.: 10 pair. 6 set 1000.00 6000.00

C40 non schedule Providing and installing LT (415V) cubical typefloor mounted, front operated with back door panelwith 16SWG MS sheet enclosure with suitablerating, colour coaded Al bus bar, powder coatedpainting, interconnected with Cu lead with crimpinglugs and complete with the following equipments:

630A TPN MCCB, 35KA as incomer -1No630A TPN Al colour coated busbar - 1setMetering panel complete with 1No. 0 -500Aammeter,1 No. 0-500V voltmeter, 1 No ASS, 1NoVSS ,3nos 5A slide lock fuse, 3Nos indicator lamp,1No.96x96 sqmm flush mounted electronic energymeter with lcd Display and 6 nos. 500/ 5A CTs.

125A TPN MCCB,25KA as outgoing -1No100A TPN MCCB,25KA as outgoing -8Nos.32A TPN MCB as outgoing -1Nos.63A TPN MCB as outgoing -7Nos.MCCB / MCB make - C&S /HPL- Moeller/ L&T/meter -AE / CT-KAPPA / ASS /VSS-KAYCEE etc.

1 set 168500.00 168500.00

C41 2.71 DANPLMV Providing and fixing MV Danger notice plate of200mm x 150mm made of mild steel, atleast 2mmthick, and vitreous enamelled white on both sidesand with inscription in signal red colour on frontside as required. 60 Each 68.00 4,080.00

C42 3.5 EARGIPL GI Earth Plate Electrode : Earthing with GI plate600mm x 600mm x 6mm thick including accessoriesand providing masonry enclosure with cover platehaving locking arrangement and watering pipe etc.(but without charcoal or coke and salt complete) asrequired. 2 set 1585.00 3,170.00

C43 3.6 EARCUPL Copper Earth Plate Electrode : Earthing with Cuearth plate 600mm x 600mm x 3mm thick includingaccessories and providing masonry enclosure withcover plate having locking arrangement andwatering pipe etc. (but without charcoal or coke andsalt complete) as required 4 set 3263.00 13,052.00

C44 3.7 EARCHARPL

Salt /charcoal for plate earth electrode: Extra forusing charcoal and salt for G.I. copper plate earthelectrode as required 8 set 603.00 4,824.00

C45 3.19 EARGIWRSUR

Providing and fixing 6 SWG dia GI wire on surfaceor in recess for loop earthing as required.

200 metre 24.00 4,800.00

C46 3.22 EARCUWRLO

Providing and fixing 4mm dia cu wire on surface orin recess for loop earthing along with existingsurface / recessed conduit/ sub-main wiring/ cablesas required 3000 metre 36.00 108,000.00


LIGHTNING CONDUCTORS

C47 4.2 LCFGI Providing and fixing of lightning conductor finial,made of 25mm dia, 300mm long GI tube, havingsingle prong at top, with 85mm dia 6mm thick GIbase plate including holes etc. complete as required.

16 each 243.00 3,888.00

C48 4.7 LCGITSURH Providing and fixing GI tape 20mm x3mm thick onparapet or surface of wall for lightning conductorsas required ( for horizontal run) 300 meter 31.00 9,300.00

C49 4.8 LCGITSURV Providing and fixing GI tape 20mm x3mm thick onparapet or surface of wall for lightning conductorsas required ( for verticall run) 200 meter 43.00 8,600.00

C50 4.12 LCTJGI Providing and fixing testing joints, made of 20mm x3mm thick GI strip, 125mm long with 4 Nos of GIbolts nuts check nuts and spring washer complete asrequired. 6 each 37.00 222.00

C51 3.5 EARGIPL GI Earth Plate Electrode : Earthing with GI plate600mm x 600mm x 6mm thick including accessoriesand providing masonry enclosure with cover platehaving locking arrangement and watering pipe etc.(but without charcoal or coke and salt complete) asrequired. 6 set 1585.00 9,510.00

C52 3.7 EARCHARPL

Salt /charcoal for plate earth electrode: Extra forusing charcoal and salt for G.I. copper plate earthelectrode as required 6 set 603.00 3,618.00

SR CPWD AMOUNT Rs. 2,456,711.00NON DSR AMOUNT Rs. 1804421.92

Total Rs. 4,261,132.92


SL DESCRIPTION UNIT QTY. RATE AMOUNT No. (Rs.) (Rs.)

a) 9 ltrs. capacity Water CO2 No. 20 1,900.00 38,000.00 b) 5 Kgs. capacity ABC Powder. No. 20 2,500.00 50,000.00 c) 9 ltrs. capacity Foam. No. 2 1,950.00 3,900.00 d) 4.5 Kgs. capacity CO2 No. 4 7,900.00 31,600.00

Set 1 62,000.00 62,000.00

D7 non-schedule S.I.T.C. of Swinging Hose Reel complete with20mm size X 33 Mtr. long Dunlop or equivalentmake rubber hose and ABS tripple purpose Nozzleas per IS: 884.a) Hose Reel Body fabricated from CRCA sheet &powder coated. No. 11 4,050.00 44,550.00 b) Hose (IS: 12585) & Nozzle. No. 11 7,025.00 77,275.00

D10

non-schedule

S.I.T.C. of 63mm X 15 Mtr. long Hose as per IS:8423, bounded with pair of Alloy Steel Coupling asper IS: 903. No. 10 5,600.00 56,000.00

D11 non-schedule S.I.T.C. of C.I. Flanged Gate Valve as per IS: 14846, PN 1.0 :- a) 50mm Nb. No. 2 6,750.00 13,500.00

(a) 100mm Nb. No. 2 8,640.00 17,280.00 (b) 50mm Nb. No. 2 6,000.00 12,000.00

FIRE FIGHTING AND PREVENTION SYSTEM

S.I.T.C. (Supply, Installation, Testing &Commissioning) of Portable Extinguisher, completein all respect i.e. with 1st charge of refill, mounting

S.I.T.C. of cubical type wall mounted DOL startersuitable for above 1 no. pump set with one remotepush button station for start-stop and complete in all

S.I.T.C. of Pressure Gauge (100mm dial & 0 to15Kg / Sq.cm) including necessary fittings & ball

S.I.T.C.of Electric Motor Driven Booster Pump setof capacity 450 Lpm at 25 Mtr. head complete in allrespect i.e. comprising pump, 7.5 HP motor of 2900

D2 non-schedule

non-scheduleD3

Set 1 8,500.00

D1 non-schedule

D4 non-scheduleSet 2

1 35,000.00 35,000.00

8,500.00

1,900.00 3,800.00

D5 non-schedule S.I.T.C. of power / control cabling between pumpmotor & pump starter and push button station byPVC insulated copper armoured cable complete with

No.

Job

5 7,670.00 38,350.00 D6 non-schedule S.I.T.C. of single headed oblique type Hydrant Valve

(Alloy Steel) as per IS: 5290 with PVC blank cap.

D8 non-scheduleNo. 1 10,450.00 10,450.00

S.I.T.C. of 3-Way Fire Service Inlet of Alloy Steelwith inbuilt non-return valve as per IS: 904.

No. 5 2,540.00 12,700.00 D9 non-schedule S.I.T.C. of Alloy Steel Branch Pipe with 18mm dia

Nozzle as per IS: 903.

D12 non-schedule S.I.T.C. of lever operated C.I. Wafer type Butter FlyValve as per IS: 13095, PN 1.0.

FIRE Page 31 of 32

D13 non-scheduleS.I.T.C. of C.I. Flanged Non Return Valve as perIS:5312, PN 1.0. (a) 50mm Nb. No. 2 6,000.00 12,000.00

D14 non-schedule S.I.T.C.of GM. Screwed Valve. a) 25mm Nb, Ball Valve as per IS: 778. No. 14 1,350.00 18,900.00 b) 25mm Nb Spring loaded Safety (Air Release) Valv No. 3 1,510.00 4,530.00

a) 100mm Nb, M.S., Medium. Mtr. 150 1,350.00 202,500.00 b) 50mm Nb, M.S., Medium. Mtr. 125 850.00 106,250.00 c) 40mm Nb, M.S., Heavy Mtr. 60 800.00 48,000.00 d) 25mm Nb, M.S., Heavy Mtr. 35 600.00 21,000.00

D17 non-schedule S.I.T.C. of Photoluminescence nature board.a) " EXIT " (150mm X 300mm). No. 12 950.00 11,400.00 b) " Arrow " (150mm X 150mm). No. 12 500.00 6,000.00

TOTAL 993,935.00

D15 non-schedule

No. 11 3,570.00 39,270.00

S.I.T.C. of front glassed single door powder coatedM.S.Hose Box (16 X 18 Swg) of standard design toaccommodate one Branch Pipe with nozzle and 2

D16 non-schedule S.I.T.C. of aboveground / underground pipingconforming to IS: 1239 with fitting, support, clampand treatment on outer surface by one coat of primer

765.00 9,180.00 S.I.T.C. of " Fire Order " on acrylic shet (size 450 X300mm appx.) by bright lettering.

D18 non-scheduleNo. 12

FIRE Page 32 of 32

VOLUME – IIIengineeringprojects.com/Tender/UploadFiles/2760_Vol--lll.pdf · 2018-07-27 ·...

Documents

Transcript of VOLUME – IIIengineeringprojects.com/Tender/UploadFiles/2760_Vol--lll.pdf · 2018-07-27 ·...