· Web viewSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDES KOHINOOR INC (TRUARC)...

Abdulaziz Ahmed Khamis Al-Zuraiq Est.Dammam: +966 3 8328380 Fax: +966 3 8326744 Email: [email protected]

27th Feb 2013

China Fastener Magazine

China

Tel: +86-20-22820122

Fax: +86-20-22820111

Attn: Ms. Plumeria,

Dear Ma’am,

Please quote for the following:

SR. NO. DESCRIPTION QTY

00614 WASHER LOCK; HELICAL SPRING, REGULAR TYPE,1-1/2 IN NOM,1.528 INID,2.394 IN OD,10.0 MM (0.3937 IN) THK,CS,NATURAL,ANSIB18.21.1,REGULAR SERIES, PACKING SPEC 8444-21 APPLIES

N.A

00615 WASHER LOCK; HELICAL SPRING, HEAVY TYPE,5/16 IN NOM,0.315 INID,37/64 IN OD,2.5 MM (0.097 IN) THK,CS,NATURAL,ANSIB18.21.1,HEAVY SERIES, PACKING SPEC 8444-21 APPLIES

N.A

00616 WASHER LOCK; HELICAL SPRING, HEAVY TYPE,3/8 IN NOM,0.382 INID,0.683 IN OD,3.2 MM (0.1279 IN) THK,CS,CADMIUM PLATED,ANSIB18.21.1,HEAVY SERIES, PACKING SPEC 8444-21 APPLIES

N.A

00617 WASHER LOCK; HELICAL SPRING, HEAVY TYPE,7/16 IN NOM,0.449 INID,3/4 IN OD,2.0 MM (0.07874 IN) THK,CS,NATURAL,ANSIB18.21.1,HEAVY SERIES, PACKING SPEC 8444-21 APPLIES

N.A

00618 WASHER LOCK; HELICAL SPRING, HEAVY TYPE,1/2 IN NOM,1/2 IN ID,7/8IN OD,3.0 MM (0.1181 IN) THK,CS,NATURAL,ANSI B18.21.1,HEAVYSERIES, PACKING SPEC 8444-21 APPLIES

N.A

00619 WASHER LOCK; HELICAL SPRING, HEAVY TYPE,5/8 IN NOM,0.640 INID,1.075 IN OD,5.0 MM (0.1968 IN) THK,CS,NATURAL,ANSIB18.21.1,HEAVY SERIES, PACKING SPEC 8444-21 APPLIES

N.A

mailto:[email protected]


N.A


N.A

00622 WASHER LOCK; HELICAL SPRING, HEAVY TYPE,1 IN NOM,1 IN ID,1.681IN OD,7.8 MM (0.306 IN) THK,CS,NATURAL,ANSI B18.21.1,HEAVYSERIES, PACKING SPEC 8444-21 APPLIES

N.A

00623 WASHER LOCK; HELICAL SPRING, HEAVY TYPE,1-1/4 IN NOM,1.302 INID,2.113 IN OD,9.8 MM (0.384 IN) THK,CS,NATURAL,ANSIB18.21.1,HEAVY SERIES, PACKING SPEC 8444-21 APPLIES

N.A

00624 RING RETAINING EXTERNAL; SINGLE TURN TYPE,LIGHT DUTY,69.9 MM(2-3/4 IN) DIA SHAFT,67.2 MM (2.644 IN) FREE ID,302 SS,ASTM A313OR AMS-5866,PASSIVATED FINISH,UNS S30200, AMS-5866,PACKING SPEC8444-21 APPLIES

N.A

00625 RING RETAINING INTERNAL; SINGLE TURN TYPE,LIGHT DUTY,79.4 MM(3-1/8 IN) DIA HOUSING,82.6 MM (3.251 IN) FREE OD,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,RAMSEYCORP CAT (SPIROLOX) #UR-312, PACKING SPEC 8444-21 APPLIES

N.A

00626 RING RETAINING INTERNAL; SINGLE TURN TYPE,LIGHT DUTY,120.7 MM(4-3/4 IN) DIA HOUSING,124.7 MM (4.910 IN) FREE OD,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,RAMSEYCORP CAT (SPIROLOX) #UR-475, PACKING SPEC 8444-21 APPLIES

N.A

00627 RING RETAINING INTERNAL; SINGLE TURN TYPE,LIGHT DUTY,139.7 MM(5-1/2 IN) DIA HOUSING,144.6 MM (5.694 IN) FREE OD,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,PACKINGSPEC 8444-21 APPLIES

N.A

00628 RING RETAINING INTERNAL; SINGLE TURN TYPE,LIGHT N.A

DUTY,57.2 MM(2-1/4 IN) DIA HOUSING,59.7 MM (2.352 IN) FREE OD,SS,ASTMA313,OIL DIPPED FINISH,UNS S30500, AISI 305,RAMSEY CORP CAT(SPIROLOX) #UR-225S

00629 RING RETAINING INTERNAL; SINGLE TURN TYPE,LIGHT DUTY,158.8 MM(6-1/4 IN) DIA HOUSING,164.3 MM (6.4700 IN) FREE OD,SS,ASTMA313,OIL DIPPED FINISH,UNS S30500, AISI 305,RAMSEY CORP CAT(SPIROLOX) #UR-625S, PACKING SPEC 8444-21 APPLIES

N.A

00630 RING RETAINING EXTERNAL; DOUBLE TURN TYPE,MEDIUM DUTY,38.1 MM(1-1/2 IN) DIA SHAFT,36.4 MM (1.433 IN) FREE ID,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,PACKINGSPEC 8444-21 APPLIES

N.A


N.A


N.A

00633 RING RETAINING EXTERNAL; DOUBLE TURN TYPE,MEDIUM DUTY,76.2 MM (3IN) DIA SHAFT,73.1 MM (2.877 IN) FREE ID,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,PACKINGSPEC 8444-21 APPLIES

N.A


N.A


N.A

00636 RING RETAINING EXTERNAL; DOUBLE TURN TYPE,MEDIUM DUTY,106.4 MM(4-3/16 IN) DIA SHAFT,60.8 MM (2.394 IN) FREE ID,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI1060,SPIROLOX RET RINGS, PACKING SPEC 8444-21 APPLIES

N.A

00637 RING RETAINING EXTERNAL; BASIC TYPE,HEAVY DUTY,12.7 MM (1/2 IN)DIA SHAFT,11.7 MM (0.460 IN) FREE ID,CARBON SPRING STEEL,ASTMA682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,PACKING SPEC8444-21 APPLIES

N. A

00638 RING RETAINING EXTERNAL; HEAVY DUTY,49.2 MM (1-15/16 IN) DIASHAFT,45.3 MM (1.782 IN) FREE ID,CARBON SPRING STEEL,ASTMA682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,PACKING SPEC8444-21 APPLIES

N.A

00639 RING RETAINING EXTERNAL; EXTERNAL TYPE,MEDIUM-HEAVY DUTY,25.4 MM(1 IN) DIA SHAFT,24.1 MM (0.947 IN) FREE ID,CARBON SPRINGSTEEL,ASTM A682M OR SAE 1070-1090,OIL DIPPED FINISH,UNS G10600,AISI 1060, SAE 1070-1090,RAMSEY CORP CAT (SPIROLOX) #RST-100,PACKING SPEC 8444-21 APPLIES

N.A

00640 RING RETAINING EXTERNAL; DOUBLE TURN TYPE,MEDIUM-HEAVY DUTY,28.6MM (1-1/8 IN) DIA SHAFT,27.0 MM (1.064 IN) FREE ID,CARBON SPRINGSTEEL,ASTM A682M OR SAE 1070-1090,OIL DIPPED FINISH,UNS G10600,AISI 1060, SAE 1070-1090,PACKING SPEC 8444-21 APPLIES

N.A


N.A

00642 RING RETAINING EXTERNAL; DOUBLE TURN TYPE,MEDIUM-HEAVY DUTY,38.1MM (1.419-1.423 IN) SHAFT,36.1 MM (1.423 IN) FREE ID,CARBONSPRING STEEL,ASTM A682M, SAE 1070-1090,OIL DIPPED FINISH,UNSG10600, AISI 1060, SAE 1070-1090,PACKING SPEC 8444-21 APPLIES

N.A

00643 RING RETAINING EXTERNAL; DOUBLE TURN TYPE,MEDIUM-HEAVY DUTY,50.0MM (1-31/32 IN) DIA SHAFT,47.3 MM (1.864 IN) FREE ID,CARBON

N.A

SPRING STEEL,ASTM A682M OR SAE 1070-1090,OIL DIPPED FINISH,UNSG10600, AISI 1060, SAE 1070-1090,PACKING SPEC 8444-21 APPLIES

00644 RING RETAINING EXTERNAL; DOUBLE TURN TYPE,MEDIUM-HEAVY DUTY,76.2MM (3 IN) DIA SHAFT,72.1 MM (2.838 IN) FREE ID,CARBON SPRINGSTEEL,ASTM A682M OR SAE 1070-1090,OIL DIPPED FINISH,UNS G10600,AISI 1060, SAE 1070-1090,PACKING SPEC 8444-21 APPLIES

N.A

00645 RING RETAINING EXTERNAL; DOUBLE TURN TYPE,MEDIUM-HEAVY DUTY,77.8MM (3-1/16 IN) DIA SHAFT,73.6 MM (2.897 IN) FREE ID,CARBONSPRING STEEL,ASTM A682M OR SAE 1070-1090,OIL DIPPED FINISH,UNSG10600, AISI 1060, SAE 1070-1090,PACKING SPEC 8444-21 APPLIES

N.A


N.A

00647 RING RETAINING EXTERNAL; DOUBLE TURN TYPE,MEDIUM-HEAVY DUTY,87.3MM (3-7/16 IN) DIA SHAFT,82.7 MM (3.254 IN) FREE ID,CARBONSPRING STEEL,ASTM A682M OR SAE 1070-1090,OIL DIPPED FINISH,UNSG10600, AISI 1060, SAE 1070-1090,PACKING SPEC 8444-21 APPLIES

N.A


N.A

00649 RING RETAINING EXTERNAL; DOUBLE TURN TYPE,MEDIUM-HEAVYDUTY,100.0 MM (3-15/16 IN) DIA SHAFT,94.7 MM (3.730 IN) FREEID,CARBON SPRING STEEL,ASTM A682M OR SAE 1070-1090,OIL DIPPEDFINISH,UNS G10600, AISI 1060, SAE 1070-1090,PACKING SPEC 8444-21APPLIES

N.A

00650 RING RETAINING EXTERNAL; EXTERNAL TYPE,MEDIUM-HEAVY DUTY,127.0MM (5 IN) DIA SHAFT,120.8 MM (4.755 IN) FREE ID,CARBON

N.A

SPRINGSTEEL,ASTM A682M OR SAE 1070-1090,OIL DIPPED FINISH,UNS G10600,AISI 1060, SAE 1070-1090,PACKING SPEC 8444-21 APPLIES

00651 RING RETAINING EXTERNAL; EXTERNAL (DOUBLE TURN)TYPE,MEDIUM-HEAVY DUTY,139.7 MM (5-1/2 IN) DIA SHAFT,132.8 MM(5.229 IN) FREE ID,CARBON SPRING STEEL,ASTM A682M OR SAE1070-1090,OIL DIPPED FINISH,UNS G10600, AISI 1060, SAE1070-1090,PACKING SPEC 8444-21 APPLIES

N.A

00652 RING RETAINING EXTERNAL; DOUBLE TURN TYPE,MEDIUM-HEAVYDUTY,165.1 MM (6-1/2 IN) DIA SHAFT,157.0 MM (6.182 IN) FREEID,CARBON SPRING STEEL,ASTM A682M OR SAE 1070-1090,OIL DIPPEDFINISH,UNS G10600, AISI 1060, SAE 1070-1090,PACKING SPEC 8444-21APPLIES

N.A

00653 RING RETAINING EXTERNAL; RETAINING, EXTERNAL TYPE,HEAVYDUTY,52.4 MM (2-1/16 IN) DIA SHAFT,49.1 MM (1.932 IN) FREEID,INCONEL X750,ASTM B637,UNS N07750,SMALLEY STEEL RING CO#WSM-206, MIL-R-27426, PACKING SPEC 8444-21 APPLIES

N.A

00654 RING RETAINING INTERNAL; DOUBLE TURN TYPE,MEDIUM-HEAVY DUTY,63.5MM (2-1/2 IN) DIA HOUSING,67.4 MM (2.653 IN) FREE OD,CARBONSPRING STEEL,ASTM A682M OR SAE 107-1090,OIL DIPPED FINISH,UNSG10600, AISI 1060, SAE 107-1090,PACKING SPEC 8444-21 APPLIES

N.A

00655 RING RETAINING INTERNAL; DOUBLE TURN TYPE,MEDIUM-HEAVY DUTY,80.2MM (3.156 IN) DIA HOUSING,85.2 MM (3.354 IN) FREE OD,CARBONSPRING STEEL,ASTM A682M OR SAE 107-1090,OIL DIPPED FINISH,UNSG10600, AISI 1060, SAE 107-1090,PACKING SPEC 8444-21 APPLIES

N.A

00656 RING RETAINING INTERNAL; INTERNAL TYPE,MEDIUM-HEAVY DUTY,100.0MM (3.938 IN) DIA HOUSING,106.1 MM (4.178 IN) FREE OD,CARBONSPRING STEEL,ASTM A682M OR SAE 107-1090,OIL DIPPED FINISH,UNSG10600, AISI 1060, SAE 107-1090,PACKING SPEC 8444-21 APPLIES

N.A

00657 RING RETAINING INTERNAL; INTERNAL TYPE,HEAVY DUTY,222.3 MM(8-3/4 IN) DIA HOUSING,233.9 MM (9.209 IN) FREE OD,CARBON SPRINGSTEEL,ASTM A682M OR SAE 107-1090,OIL DIPPED FINISH,UNS G10600,

N.A

AISI 1060, SAE 107-1090,PACKING SPEC 8444-21 APPLIES

00658 RING RETAINING EXTERNAL; DOUBLE TURN TYPE,MEDIUM DUTY,76.2 MM (3IN) DIA SHAFT,73.1 MM (2.877 IN) FREE ID,302 SS,ASTM 313 ORAMS-5866,PASSIVATED FINISH,UNS S30200, AISI 302, AMS5866,PACKING SPEC 8444-21 APPLIES

N.A

00659 RING RETAINING EXTERNAL; BASIC TYPE,STANDARD DUTY,4.0 MM (5/32IN) DIA SHAFT,3.6 MM (0.142 IN) FREE ID,CARBON SPRING STEEL,ASTMA682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDES KOHINOORINC (TRUARC) #5100-15, PACKING SPEC 8444-21 APPLIES

N.A

00660

00661

RING RETAINING EXTERNAL; BASIC TYPE,STANDARD DUTY,4.8 MM (3/16IN) DIA SHAFT,4.5 MM (0.179 IN) FREE ID,CARBON SPRING STEEL,ASTMA682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDES KOHINOORINC (TRUARC) #5100-19, PACKING SPEC 8444-21 APPLIES

RING RETAINING EXTERNAL; BASIC TYPE,STANDARD DUTY,6.4 MM (1/4IN) DIA SHAFT,5.5 MM (0.215 IN) FREE ID,CARBON SPRING STEEL,ASTMA682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDES KOHINOORINC (TRUARC) #5100-25, PACKING SPEC 8444-21 APPLIES

N.A


N.A


N.A

00664 RING RETAINING EXTERNAL; BASIC TYPE,STANDARD DUTY,9.0 MM (0.354IN) DIA SHAFT,8.1 MM (0.320 IN) FREE ID,CARBON SPRING STEEL,ASTMA682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDES KOHINOORINC (TRUARC) #5100-35, PACKING SPEC 8444-21 APPLIES

N.A

00665 RING RETAINING EXTERNAL; BASIC TYPE,STANDARD DUTY,9.5 MM (3/8

N.A

IN) DIA SHAFT,8.6 MM (0.338 IN) FREE ID,CARBON SPRING STEEL,ASTMA682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDES KOHINOORINC (TRUARC) #5100-37, PACKING SPEC 8444-21 APPLIES

00666 RING RETAINING EXTERNAL; BASIC TYPE,STANDARD DUTY,11.1 MM (7/16IN) DIA SHAFT,10.0 MM (0.395 IN) FREE ID,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #5100-43, PACKING SPEC 8444-21 APPLIES

N.A


N.A


N.A


N.A


N.A


N.A


N.A


N.A


N.A


N.A


N.A


N.A


N.A


N.A

00680 RING RETAINING EXTERNAL; BASIC TYPE,STANDARD DUTY,25.4 MM (1 IN)DIA SHAFT,23.5 MM (0.925 IN) FREE ID,CARBON SPRING STEEL,ASTMA682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDES KOHINOORINC (TRUARC) #5100-100, PACKING SPEC 8444-21 APPLIES

N.A

00681 RING RETAINING EXTERNAL; BASIC TYPE,STANDARD DUTY,27.0 MM(1-1/16 IN) DIA SHAFT,24.9 MM (0.982 IN) FREE ID,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #5100-106, PACKING SPEC 8444-21 APPLIES

N.A

00682 RING RETAINING EXTERNAL; BASIC TYPE,STANDARD DUTY,28.6 MM (1-1/8IN) DIA SHAFT,26.4 MM (1.041 IN) FREE ID,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #5100-112, PACKING SPEC 8444-21 APPLIES

N.A


N.A


N.A


N.A


N.A


N.A

00688 RING RETAINING EXTERNAL; BASIC TYPE,STANDARD DUTY,38.1 MM (1-1/2

N.A

IN) DIA SHAFT,35.2 MM (1.387 IN) FREE ID,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #5100-150, PACKING SPEC 8444-21 APPLIES


N.A


N.A


N.A


N.A

00693 RING RETAINING EXTERNAL; BASIC TYPE,STANDARD DUTY,45.0 MM (1.771IN) DIA SHAFT,41.6 MM (1.637 IN) FREE ID,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #5100-177, PACKING SPEC 8444-21 APPLIES

N.A


N.A

00695 RING RETAINING EXTERNAL; BASIC TYPE,STANDARD DUTY,50.0 MM(1-31/32 IN) DIA SHAFT,46.2 MM (1.819 IN) FREE ID,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDES

N.A

KOHINOOR INC (TRUARC) #5100-196, PACKING SPEC 8444-21 APPLIES


N.A


N.A


N.A


N.A

00700 RING RETAINING EXTERNAL; BASIC TYPE,STANDARD DUTY,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC), PACKING SPEC 8444-21 APPLIES

00701 RING RETAINING EXTERNAL; BASIC TYPE,STANDARD DUTY,60.3 MM (2-3/8IN) DIA SHAFT,55.8 MM (2.197 IN) FREE ID,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDES KOHINOOR INC (TRUARC) #5100-237, PACKING SPEC 8444-21 APPLIES

N.A


N.A


N.A


N.A


N.A


N.A


N.A


N.A

00709 RING RETAINING EXTERNAL; BASIC TYPE,STANDARD DUTY,90.0 MM (3.543IN) DIA SHAFT,83.2 MM (3.277 IN) FREE ID,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #5100-354, PACKING SPEC 8444-21 APPLIES

N.A

00710 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,14.3 MM (9/16IN) DIA HOUSING,15.7 MM (0.620 IN) FREE OD,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #N5000-56, PACKING SPEC 8444-

N.A

21 APPLIES

00711 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,15.9 MM (5/8IN) DIA HOUSING,17.6 MM (0.694 IN) FREE OD,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #N5000-62, PACKING SPEC 8444-21 APPLIES

N.A


N.A

00713 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,19.7 MM (0.777IN) DIA HOUSING,21.8 MM (0.859 IN) FREE OD,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #N5000-77, PACKING SPEC 8444-21 APPLIES

N.A

00714 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,22.2 MM (7/8IN) DIA HOUSING,24.7 MM (0.971 IN) FREE OD,CARBON SPRING STEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #N5000-87, PACKING SPEC 8444-21 APPLIES

N.A


N.A

00716 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,25.4 MM (1 IN)DIA HOUSING,28.2 MM (1.111 IN) FREE OD,CARBON SPRING STEEL,ASTMA682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDES KOHINOORINC (TRUARC) #5000-100, PACKING SPEC 8444-21 APPLIES

N.A

00717 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,27.0 MM

N.A

(1-1/16 IN) DIA HOUSING,30.0 MM (1.180 IN) FREE OD,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #5000-106, PACKING SPEC 8444-21 APPLIES

00718 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,28.6 MM (1-1/8IN) DIA HOUSING,31.7 MM (1.249 IN) FREE OD,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #5000-112, PACKING SPEC 8444-21 APPLIES

N.A

00719 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,30.2 MM(1-3/16 IN) DIA HOUSING,33.5 MM (1.319 IN) FREE OD,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #5000-118, PACKING SPEC 8444-21 APPLIES

N.A


N.A


N.A


N.A

00723 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,39.7 MM(1-9/16 IN) DIA HOUSING,44.0 MM (1.734 IN) FREE OD,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #5000-156, PACKING SPEC 8444-21 APPLIES

N.A

00724 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,41.3 MM (1-5/8IN) DIA HOUSING,45.8 MM (1.804 IN) FREE OD,CARBON SPRING

N.A

STEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #5000-162, PACKING SPEC 8444-21 APPLIES

00725 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,42.0 MM (1.653IN) DIA HOUSING,46.6 MM (1.835 IN) FREE OD,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #5000-165, PACKING SPEC 8444-21 APPLIES

N.A

00726 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,42.9 MM(1-11/16 IN) DIA HOUSING,47.6 MM (1.874 IN) FREE OD,CARBONSPRING STEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI1060,WALDES KOHINOOR INC (TRUARC) #5000-168, PACKING SPEC8444-21 APPLIES

N.A

00727 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,44.5 MM (1-3/4IN) DIA HOUSING,49.3 MM (1.942 IN) FREE OD,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #N5000-175, PACKING SPEC 8444-21 APPLIES

N.A


N.A


N.A

00730 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,50.8 MM (2 IN)DIA HOUSING,56.1 MM (2.210 IN) FREE OD,CARBON SPRING STEEL,ASTMA682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDES KOHINOORINC (TRUARC) #5000-200, PACKING SPEC 8444-21 APPLIES

N.A


N.A


00732 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,54.0 MM (2-1/8IN) DIA HOUSING,59.7 MM (2.350 IN) FREE OD,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #N5000-212, PACKING SPEC 8444-21 APPLIES

N.A

00733 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,61.9 MM(2-7/16 IN) DIA HOUSING,68.6 MM (2.702 IN) FREE OD,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC), PACKING SPEC 8444-21 APPLIES

N.A

00734 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,71.4 MM(2-13/16 IN) DIA HOUSING,79.3 MM (3.121 IN) FREE OD,CARBONSPRING STEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI1060,WALDES KOHINOOR INC (TRUARC) #N5000-281, PACKING SPEC8444-21 APPLIES

N.A

00735 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,80.0 MM (3.149IN) DIA HOUSING,89.5 MM (3.523 IN) FREE OD,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #N5000-315, PACKING SPEC 8444-21 APPLIES

N.A


N.A

00737 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,100.0 MM(3-15/16 IN) DIA HOUSING,110.7 MM (4.358 IN) FREE OD,CARBONSPRING STEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI1060,WALDES KOHINOOR INC (TRUARC) #N5000-393, PACKING SPEC8444-21 APPLIES

N.A


N.A


00739 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,114.3 MM(4-1/2 IN) DIA HOUSING,125.5 MM (4.940 IN) FREE OD,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #N5000-450, PACKING SPEC 8444-21 APPLIES

N.A

00740 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,120.7 MM(4-3/4 IN) DIA HOUSING,132.4 MM (5.213 IN) FREE OD,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #N5000-475, PACKING SPEC 8444-21 APPLIES

N.A

00741 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,127.0 MM (5IN) DIA HOUSING,139.3 MM (5.485 IN) FREE OD,CARBON SPRING STEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #5000-500, PACKING SPEC 8444-21 APPLIES

N.A

00742 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,152.4 MM (6IN) DIA HOUSING,168.1 MM (6.620 IN) FREE OD,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #5000-600, PACKING SPEC 8444-21 APPLIES

N.A

00743RING RETAINING EXTERNAL; BASIC TYPE,STANDARD DUTY,38.1 MM (1-1/2IN) DIA SHAFT,35.2 MM (1.387 IN) FREE ID,PH 15-7 MOSS,PASSIVATED FINISH,AMS 5520, AISI 632,PACKING SPEC 8444-21APPLIES

N.A

00744 RING RETAINING EXTERNAL; BASIC TYPE,STANDARD DUTY,42.9 MM(1-11/16 IN) DIA SHAFT,39.6 MM (1.560 IN) FREE ID,PH 15-7 MOSS,PASSIVATED FINISH,AMS 5520, AISI 632,PACKING SPEC 8444-21APPLIES

N.A

00745 RING RETAINING EXTERNAL; BASIC TYPE,STANDARD DUTY,54.0 MM (2-1/8IN) DIA SHAFT,49.9 MM (1.964 IN) FREE ID,PH 15-7 MOSS,PASSIVATED FINISH,AMS 5520, AISI 632,PACKING SPEC 8444-21APPLIES

N.A

00746 RING RETAINING EXTERNAL; BASIC TYPE,STANDARD DUTY,63.5 MM (2-1/2IN) DIA SHAFT,58.8 MM (2.313 IN) FREE ID,PH 15-7 MOSS,PASSIVATED FINISH,AMS 5520, AISI 632,PACKING SPEC 8444-21 APPLIES

N.A

00747 RING RETAINING EXTERNAL; BASIC TYPE,STANDARD DUTY,65.0 MM(2-9/16 IN) DIA SHAFT,60.4 MM (2.377 IN) FREE ID,PH 15-7 MOSS,PASSIVATED FINISH,AMS 5520, AISI 632,#5100-255-H, PACKINGSPEC 8444-21 APPLIES

N.A

00748 RING RETAINING EXTERNAL; BASIC TYPE,STANDARD DUTY,69.9 MM (2-3/4IN) DIA SHAFT,64.6 MM (2.543 IN) FREE ID,PH 15-7 MOSS,PASSIVATED FINISH,AMS 5520, AISI 632,#5100-275-H, PACKINGSPEC 8444-21 APPLIES

N.A

00749 RING RETAINING EXTERNAL; BASIC TYPE,STANDARD DUTY,88.9 MM (3-1/2IN) DIA SHAFT,82.2 MM (3.237 IN) FREE ID,PH 15-7 MOSS,PASSIVATED FINISH,AMS 5520, AISI 632,#5100-350-H, PACKINGSPEC 8444-21 APPLIES

N.A

00750 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,22.2 MM (7/8IN) DIA HOUSING,24.7 MM (0.971 IN) FREE OD,SS,ASTMA313,PASSIVATED FINISH,UNS S30500, AISI 305,WALDES KOHINOOR INC(TRUARC) #N5000-87-H, PACKING SPEC 8444-21 APPLIES

N.A

00751 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,25.4 MM (1 IN)DIA HOUSING,28.2 MM (1.111 IN) FREE OD,SS,ASTM A313,PASSIVATEDFINISH,UNS S30500, AISI 305,WALDES KOHINOOR INC (TRUARC)#N5000-100-H, PACKING SPEC 8444-21 APPLIES

N.A

00752 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,28.6 MM (1-1/8IN) DIA HOUSING,31.7 MM (1.249 IN) FREE OD,SS,ASTMA313,PASSIVATED FINISH,UNS S30500, AISI 305,WALDES KOHINOOR INC(TRUARC) #N5000-112-H, PACKING SPEC 8444-21 APPLIES

N.A

00753 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,33.3 MM(1-5/16 IN) DIA HOUSING,37.0 MM (1.456 IN) FREE OD,SS,ASTMA313,PASSIVATED FINISH,UNS S30500, AISI 305,WALDES KOHINOOR INC(TRUARC) #N5000-131-H, PACKING SPEC 8444-21 APPLIES

N.A

00754 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,41.3 MM (1-5/8IN) DIA HOUSING,45.8 MM (1.804 IN) FREE OD,SS,ASTMA313,PASSIVATED FINISH,UNS S30500, AISI 305,WALDES KOHINOOR INC(TRUARC) #N5000-162-H, PACKING SPEC 8444-21 APPLIES

N.A

00755 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,44.5 MM (1-3/4IN) DIA HOUSING,49.3 MM (1.942 IN) FREE OD,SS,ASTMA313,PASSIVATED FINISH,UNS S30500, AISI 305,WALDES

N.A

KOHINOOR INC(TRUARC) #N5000-175-H, PACKING SPEC 8444-21 APPLIES

00756 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,177.8 MM (7IN) DIA HOUSING,196.1 MM (7.720 IN) FREE OD,CARBON SPRINGSTEEL,ASTM A682M,CADMIUM PLATED FINISH,UNS G10600, AISI1060,WALDES KOHINOOR INC (TRUARC) #5000-700-MD, PACKING SPEC8444-21 APPLIES

N.A

00757 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,190.5 MM(7-1/2 IN) DIA HOUSING,210.1 MM (8.270 IN) FREE OD,CARBON SPRINGSTEEL,ASTM A682M,CADMIUM PLATED FINISH,UNS G10600, AISI1060,WALDES KOHINOOR INC (TRUARC) #5000-750-MD, PACKING SPEC8444-21 APPLIES

N.A

00758 RING RETAINING INTERNAL; BEVELED TYPE,STANDARD DUTY,47.0 MM(1.850 IN) DIA HOUSING,52.2 MM (2.054 IN) FREE OD,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #5002-185, PACKING SPEC 8444-21 APPLIES

N.A

00759 RING RETAINING INTERNAL; BEVELED TYPE,STANDARD DUTY,62.0 MM(2.440 IN) DIA HOUSING,68.6 MM (2.702 IN) FREE OD,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #N5002-244, PACKING SPEC 8444-21 APPLIES

N.A

00760 RING RETAINING INTERNAL; BEVELED TYPE,STANDARD DUTY,110.0 MM(4.331 IN) DIA HOUSING,120.8 MM (4.756 IN) FREE OD,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #5002-433, PACKING SPEC 8444-21 APPLIES

N.A

00761 RING RETAINING EXTERNAL; BOWED TYPE,STANDARD DUTY,12.7 MM (1/2IN) DIA SHAFT,11.7 MM (0.461 IN) FREE ID,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #5101-50, PACKING SPEC 8444-21 APPLIES

N.A

00762 RING RETAINING EXTERNAL; BOWED TYPE,STANDARD DUTY,25.4 MM (1 IN)DIA SHAFT,23.5 MM (0.925 IN) FREE ID,CARBON SPRING STEEL,ASTMA682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDES KOHINOORINC (TRUARC) #5101-100, PACKING SPEC 8444-21 APPLIES

N.A

00763 RING RETAINING INTERNAL; CIRCULAR PUSH-ON TYPE,STANDARDDUTY,11.1 MM (7/16 IN) DIA HOUSING,6.0 MM (0.237 IN) FREEOD,CARBON SPRING STEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600,AISI 1060,WALDES KOHINOOR INC (TRUARC) #5005-43, PACKING SPEC8444-21 APPLIES

N.A

00764 RING RETAINING EXTERNAL; REINFORCED CIRCULAR PUSH-ONTYPE,STANDARD DUTY,12.7 MM (1/2 IN) DIA SHAFT,21.0 MM (0.828 IN)FREE ID,CARBON SPRING STEEL,ASTM A682M,OIL DIPPED FINISH,UNSG10600, AISI 1060,PACKING SPEC 8444-21 APPLIES

N.A

00765 RING RETAINING EXTERNAL; E TYPE,HEAVY DUTY,19.1 MM (3/4 IN) DIASHAFT,14.6 MM (0.574 IN) FREE ID,CARBON SPRING STEEL,ASTMA682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDES KOHINOORINC (TRUARC) #5133-75, TYPE 3CM1, PACKING SPEC 8444-21 APPLIES

N.A

00766 RING RETAINING EXTERNAL; INTERLOCKING TYPE,STANDARD DUTY,63.5 MM(2-1/2 IN) DIA SHAFT,58.5 MM (2.304 IN) FREE ID,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #5107-250, PACKING SPEC 8444-21 APPLIES

N.A

00767 RING RETAINING EXTERNAL; INVERTED TYPE,STANDARD DUTY,22.2 MM(0.875 IN) SHAFT,20.6 MM (0.81 IN) FREE ID,CARBON SPRINGSTEEL,ASTM A-682M, UNS G 10600,OIL DIPPED FINISH,AISI 1060,NO5108-87, WALDES KOHINOOR INC (TRUARC), PACKAGING SPEC 8444-21APPLIES

N.A

00768 RING RETAINING INTERNAL; INVERTED TYPE,STANDARD DUTY,34.9 MM (1-3/8 IN) DIA HOUSING,37.7 MM (1.486 IN) FREE OD,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #5008-137, PACKING SPEC 8444-21 APPLIES

N.A

00769 RING RETAINING EXTERNAL; INVERTED TYPE,STANDARD DUTY,12.7 MM(1/2 IN) DIA SHAFT,11.7 MM (0.461 IN) FREE ID,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #5108-50, PACKING SPEC 8444-21 APPLIES

N.A

00770 RING RETAINING EXTERNAL; INVERTED TYPE,STANDARD DUTY,15.9 MM(5/8 IN) DIA SHAFT,14.7 MM (0.579 IN) FREE ID,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #5108-62, PACKING SPEC 8444-21 APPLIES

N.A

00771 RING RETAINING EXTERNAL; INVERTED TYPE,STANDARD DUTY,25.4 MM (1IN) DIA SHAFT,23.5 MM (0.925 IN) FREE ID,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #5108-100, PACKING SPEC 8444-21 APPLIES

N.A

00772 RING RETAINING EXTERNAL; INVERTED TYPE,STANDARD DUTY,28.6 MM(1-1/8 IN) DIA SHAFT,26.4 MM (1.041 IN) FREE ID,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #5108-112, PACKING SPEC 8444-21 APPLIES

N.A


N.A


N.A


N.A

00776 RING RETAINING EXTERNAL; INVERTED TYPE,STANDARD DUTY,50.0 MM(1-31/32 IN) DIA SHAFT,46.2 MM (1.819 IN) FREE ID,CARBON SPRING STEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #5108-196, PACKING SPEC 8444-21 APPLIES

N.A

00777 RING RETAINING EXTERNAL; INVERTED TYPE,STANDARD DUTY,50.8 MM (2IN) DIA SHAFT,47.0 MM (1.850 IN) FREE ID,CARBON SPRINGSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDESKOHINOOR INC (TRUARC) #5108-200, PACKING SPEC 8444-

N.A

21 APPLIES


N.A


N.A

00780 RING RETAINING EXTERNAL; INVERTED TYPE,STANDARD DUTY,38.1 MM(1-1/2 IN) DIA SHAFT,35.2 MM (1.387 IN) FREE ID,COPPER-BERYLLIUMALLOY,ASTM B194,PASSIVATED FINISH,UNS C17200,WALDES KOHINOOR INC(TRUARC) #5108-150C, PACKING SPEC 8444-21 APPLIES

N.A

00781 RING RETAINING EXTERNAL; OVER-LAPPING END TYPE,LIGHT DUTY,3.2 MM(1/8 IN) DIA SHAFT,2.7 MM (0.108 IN) FREE ID,CARBON SPRINGSTEEL,OIL DIPPED FINISH,HEAT TREATED, PKG OF 50, PACKING SPEC8444-21 APPLIES

N.A

00782 RING RETAINING EXTERNAL; EXTERNAL TYPE,6.4-50.8 MM (1/4 TO 2 IN)DIA SHAFT,CARBON SPRING STEEL,OIL DIPPED FINISH,ASSORTMENT,CONTAINS 356 PIECES, 24 VARIETIES & 5.25 PIECES IN EACH SIZE,PACKING SPEC 8444-21 APPLIES

N.A

00783 RING RETAINING EXTERNAL; EXTERNAL TYPE,3.2-50.8 MM (1/8 TO 2 IN)DIA SHAFT,CARBON SPRING STEEL,OIL DIPPED FINISH,24 VARIETIES,1/8,3/16,1/4,5/16,3/8, 7/16,1/2,9/16,5/8,11/16,3/4 ,7/8,1,1-3/16,1-1/4,1-5/16,1-3/8,1 -7/16, 1-1/2,1-9/16,1-5/8,1-3/4,1-7/8, & 2 IN DIA SHAFT, PACKING SPEC 8444-21 APPLIES

N.A

00784 RING RETAINING; EXTERNAL & INTERNAL TYPE,SIZE 1/4 TO 7/8 INSHAFT DIA EXTERNAL AND 3/8 TO 1 IN HOUSING DIA INTERNAL,ZINCPLATED CARBON STEEL,ASSORTMENT, 221 PIECES, 10 SIZES EXTERNAL1/4 TO 7/8 IN SHAFT DIA & 10 SIZES INTERNAL 3/8 TO 1 IN HOUSINGDIA, INCLUDES PLIERS FOR INTERNAL & EXTERNAL RINGS, PACKING SPEC8444-21 APPLIES

N.A

00785 RING RETAINING INTERNAL; ASSORTMENT TYPE,7.9-50.8 MM (5/16 TO 2IN) DIA HOUSING,CARBON SPRING STEEL,OIL DIPPED FINISH,CONTAINS350 PIECES, 24 VARIETIES & 10-20 PIECES IN EACH SIZE, PACKINGSPEC 8444-21 APPLIES

N.A

00786 RING RETAINING INTERNAL; BASIC TYPE,STANDARD DUTY,6.34-50.8 MM(1/4 TO 2 IN) HOUSING,11.7-54.0 MM (0.461-2.122 IN) FREEOD,CARBON SPRING STEEL,ASTM A682M,OIL DIPPED FINISH,ASSORTMENT,19 VARIETIES, 1/4, 5/16, 3/8, 7/16,1/2,9/16,5/8,11/16,1-1/8,1-1/4, 1-5/16, 1-3/8,1-7/16,1-1/2,1-9/16,1-5/8, 1-3/4,1-7/8 AND 2 IN, PACKING SPEC 8444-21 APPLIES

N.A

00787 RING RETAINING EXTERNAL; E TYPE,2.4-25.4 MM (3/32 TO 1 IN) DIASHAFT,CARBON SPRING STEEL,OIL DIPPED FINISH,ASSORTMENT, CONTAINS900 PIECES, 14 VARIETIES & 25-100 PIECES IN EACH SIZE, 1IFCO COSET #85281, PACKING SPEC 8444-21 APPLIES

N.A

00788 WASHER FLAT/PLAIN; 5/16 IN NOM,11/32 IN ID,5/8 IN OD,2.4 MM(0.095 IN) THK,ALUMINIUM,ASTM B211,NATURAL,GR ALLOY2011,ANSI/ASME B18.22.1,ROUND PLAIN, PACKING SPEC 8444-21 APPLIES

N.A


N.A


N.A


N.A

00792 WASHER FLAT/PLAIN; 1/8 IN NOM,9/64 IN ID,3/8 IN OD,0.8 MM (0.032IN) THK,BRASS,ASTM B16 OR B36,BRIGHT,GR UNS C26800/C26000, H02TEMPER,ANSI/ASME B18.22.1,ROUND PLAIN, 2394 WASHERS/KG, PACKINGSPEC 8444-21 APPLIES

N.A

00793 WASHER FLAT/PLAIN; 3/16 IN NOM,1/4 IN ID,1/2 IN OD,1.0 MM (0.040IN) THK,BRASS,ASTM B16 OR B36,BRIGHT,GR UNS C26800, H02

N.A

TEMPER,ANSI/ASME B18.22.1,ROUND PLAIN, 1089 WASHERS/KG, PACKINGSPEC 8444-21 APPLIES

00794 WASHER FLAT/PLAIN; 1/4 IN NOM,9/32 IN ID,11/16 IN OD,1.3 MM(0.051 IN) THK,BRASS,ASTM B16 OR B36,BRIGHT,GR UNS C26800, H02TEMPER,ANSI/ASME B18.22.1,ROUND PLAIN, 441 WASHERS/KG, PACKINGSPEC 8444-21 APPLIES

N.A

00795 WASHER FLAT/PLAIN; 5/16 IN NOM,11/32 IN ID,7/8 IN OD,1.6 MM(0.063 IN) THK,BRASS,ASTM B16 OR B36,BRIGHT,GR UNS C26800, H02TEMPER,ANSI/ASME B18.22.1,ROUND PLAIN, 212 WASHERS/KG, PACKINGSPEC 8444-21 APPLIES

N.A

00796 WASHER FLAT/PLAIN; 3/8 IN NOM,7/16 IN ID,1 IN OD,2.1 MM (0.083IN) THK,BRASS,ASTM B16 OR B36,BRIGHT,GR UNS C26800, H02TEMPER,ANSI/ASME B18.22.1,ROUND PLAIN, 132 WASHERS/KG, PACKINGSPEC 8444-21 APPLIES

N.A

00797 WASHER FLAT/PLAIN; 7/16 IN NOM,1/2 IN ID,1-1/8 IN OD,2.1 MM(0.083 IN) THK,BRASS,ASTM B16 OR B36,BRIGHT,GR UNS C26800, H02TEMPER,ANSI/ASME B18.22.1,ROUND PLAIN, 110 WASHERS/KG, PACKINGSPEC 8444-21 APPLIES

N.A

00798 WASHER FLAT/PLAIN; 1/2 IN NOM,9/16 IN ID,1-1/4 IN OD,2.5 MM(0.100 IN) THK,BRASS,ASTM B16 OR B36,BRIGHT,GR UNS C26800, H02TEMPER,ANSI/ASME B18.22.1,ROUND PLAIN, PACKING SPEC 8444-21APPLIES

N.A

00799 WASHER FLAT/PLAIN; 5/8 IN NOM,11/16 IN ID,1-1/2 IN OD,2.5 MM(0.100 IN) THK,BRASS,ASTM B16 OR B36,BRIGHT,GR UNS C26800, H02TEMPER,ANSI/ASME B18.22.1,ROUND PLAIN, 48 WASHERS/KG, PACKINGSPEC 8444-21 APPLIES

N.A

00800 WASHER FLAT/PLAIN; 8.00 MM ID,9.70 MM OD,0.08 MM THK,BRASS,DIN137,NATURAL,GR B.8,ROUND PLAIN, PACKING SPEC 8444-21 APPLIES

N.A

00801 WASHER FLAT/PLAIN; NO 8 (0.164 IN) NOM,3/16 IN ID,5/16 IN OD,1.6MM (0.063 IN) THK,COPPER,ASTM B152,NATURAL,GR UNS C11000, H03TEMPER,ANSI/ASME B18.22.1,ROUND PLAIN, PACKING SPEC 8444-21APPLIES

N.A

00802 WASHER FLAT/PLAIN; 1/4 IN NOM,9/32 IN ID,7/16 IN OD,0.8 MM(0.032 IN) THK,COPPER,ASTM B152,NATURAL,GR UNS C11000, H03TEMPER,ANSI/ASME B18.22.1,ROUND PLAIN, PACKING SPEC 8444-21APPLIES

N.A

00803 WASHER FLAT/PLAIN; 1/4 IN NOM,9/32 IN ID,5/8 IN OD,1.7 MM (0.065IN) THK,COPPER,ASTM B152,NATURAL,GR UNS C11000, H03TEMPER,ANSI/ASME B18.22.1,ROUND PLAIN, PACKING SPEC 8444-21APPLIES

N.A


N.A

00805 WASHER FLAT/PLAIN; 5/16 IN NOM,11/32 IN ID,11/16 IN OD,1.7 MM(0.065 IN) THK,COPPER,ASTM B152,NATURAL,GR UNS C11000 H03TEMPER,ANSI/ASME B18.22.1,ROUND PLAIN, PACKING SPEC 8444-21APPLIES

N.A


N.A


N.A

00808 WASHER FLAT/PLAIN; 1/2 IN NOM,17/32 IN ID,3/4 IN OD,1.6 MM(0.063 IN) THK,COPPER,ASTM B152,NATURAL,GR UNS C11000 H03TEMPER,ANSI/ASME B18.22.1,ROUND PLAIN, PACKING SPEC 8444-21APPLIES

N.A

` 00809 WASHER FLAT/PLAIN; 5/8 IN NOM,41/64 IN ID,15/16 IN OD,0.5 MM(0.020 IN) THK,COPPER,ASTM B152,NATURAL,GR UNS C11000, H03TEMPER,ANSI/ASME B18.22.1,ROUND PLAIN, PACKING SPEC

N.A

8444-21APPLIES

00810 WASHER FLAT/PLAIN; 3/4 IN ID,15/16 IN OD,1.6 MM (0.063 IN)THK,COPPER,ASTM B152,NATURAL,GR UNS C11000, H03 TEMPER,ANSI/ASMEB18.22.1,ROUND PLAIN, PACKING SPEC 8444-21 APPLIES

N.A

00811 WASHER FLAT/PLAIN; 61/64 IN ID,1-1/8 IN OD,1.6 MM (0.063 IN)THK,COPPER,ASTM B152,NATURAL,GR UNS C11000, H03 TEMPER,ANSI/ASMEB18.22.1,ROUND PLAIN, PACKING SPEC 8444-21 APPLIES

N.A

00812 WASHER FLAT/PLAIN; 1/2 IN NOM,9/16 IN ID,1-3/8 IN OD,2.8 MM(0.109 IN) THK,SS,ASTM A666,NATURAL,GR UNS S30400 (AISI304),ANSI/ASME B18.22.1,ROUND PLAIN, PACKING SPEC 8444-21 APPLIES

N.A

00813 WASHER FLAT/PLAIN; 5/16 IN NOM,3/8 IN ID,7/8 IN OD,1.6 MM (0.063IN) THK,SS,ASTM A176,NATURAL,GR UNS S40300 (AISI 403), OR UNSS41000 (AISI 410),ANSI/ASME B18.22.1,PLAIN, PACKING SPEC 8444-21APPLIES

N.A

00814 WASHER FLAT/PLAIN; 3/8 IN NOM,13/32 IN ID,13/16 IN OD,1.7 MM(0.065 IN) THK,SS,ASTM A666,NATURAL,GR UNS S31600 (AISI316),ANSI/ASME B18.22.1,ROUND PLAIN, PACKING SPEC 8444-21 APPLIES

N.A

00815 WASHER FLAT/PLAIN; 1/4 IN NOM,9/32 IN ID,5/8 IN OD,1.7 MM (0.065IN) THK,ALLOY STEEL,SAE,CADMIUM PLATED,GR 8,ANSI/ASMEB18.22.1,ROUND FLAT, AUTOMOTIVE TYPE, 496 WASHERS/KG, PACKINGSPEC 8444-21 APPLIES

N.A

00816 WASHER FLAT/PLAIN; 5/16 IN NOM,11/32 IN ID,11/16 IN OD,1.7 MM(0.065 IN) THK,ALLOY STEEL,SAE,CADMIUM PLATED,GR 8,ANSI/ASMEB18.22.1,ROUND FLAT, AUTOMOTIVE TYPE, 441 WASHERS/KG, PACKINGSPEC 8444-21 APPLIES

N.A

00817 WASHER FLAT/PLAIN; 3/8 IN NOM,13/32 IN ID,13/16 IN OD,1.7 MM(0.065 IN) THK,ALLOY STEEL,SAE,CADMIUM PLATED,GR 8,ANSI/ASME B18.22.1,ROUND FLAT, AUTOMOTIVE TYPE, 287 WASHERS/KG, PACKINGSPEC 8444-21 APPLIES

N.A

00818 WASHER FLAT/PLAIN; 7/16 IN NOM,15/32 IN ID,15/16 IN OD,1.7 MM(0.065 IN) THK,ALLOY STEEL,SAE,CADMIUM PLATED,GR 8,ANSI/ASMEB18.22.1,ROUND FLAT, AUTOMOTIVE TYPE, 242 WASHERS/KG, PACKINGSPEC 8444-21 APPLIES

N.A

00819 WASHER FLAT/PLAIN; 1/2 IN NOM,17/32 IN ID,1-1/16 IN OD,2.4 MM(0.095 IN) THK,ALLOY STEEL,SAE,CADMIUM PLATED,GR 8,ANSI/ASMEB18.22.1,ROUND FLAT, AUTOMOTIVE TYPE, 132 WASHERS/KG, PACKINGSPEC 8444-21 APPLIES

N.A


N.A


N.a


N.A


N.A

00824 WASHER FLAT/PLAIN; 1 IN NOM,1-1/16 IN ID,2 IN OD,3.4 MM (0.134IN) THK,ALLOY STEEL,SAE,CADMIUM PLATED,GR 8,ANSI/ASMEB18.22.1,ROUND FLAT, AUTOMOTIVE TYPE, 26 WASHERS/KG, PACKINGSPEC 8444-21 APPLIES

N.A

00825 WASHER FLAT/PLAIN; 3/8 IN NOM,7/16 IN ID,13/16 IN OD,1.7 MM(0.065 IN) THK,ALLOY STEEL,GALV,GR 8,ANSI/ASME B18.22.1,ROUNDPLAIN, PACKING SPEC 8444-21 APPLIES

N.A

00826 WASHER FLAT/PLAIN; 3/8 IN NOM,7/16 IN ID,1 IN OD,2.1 MM (0.083IN) THK,ALLOY STEEL,SAE,GALV,GR 8,ANSI/ASME B18.22.1,ROUNDPLAIN, PACKING SPEC 8444-21 APPLIES

N.A

00827 WASHER FLAT/PLAIN; 1/2 IN NOM,9/16 IN ID,1-3/8 IN OD,2.7 N.A

MM(0.109 IN) THK,ALLOY STEEL,SAE,GALV,GR 8,ANSI/ASMEB18.22.1,ROUND PLAIN, 57 WASHERS/KG, PACKING SPEC 8444-21 APPLIES

00828 WASHER FLAT/PLAIN; 3/4 IN NOM,13/16 IN ID,2 IN OD,3.8 MM (0.148IN) THK,ALLOY STEEL,SAE,GALV,GR 8,ANSI/ASME B18.22.1,ROUNDPLAIN, 20 WASHERS/KG, PACKING SPEC 8444-21 APPLIES

N.A

00829 WASHER FLAT/PLAIN; 7/8 IN NOM,15/16 IN ID,2-1/4 IN OD,4.2 MM(0.165 IN) THK,ALLOY STEEL,SAE,GALV,GR 8,ANSI/ASMEB18.22.1,ROUND PLAIN, 14 WASHERS/KG, PACKING SPEC 8444-21 APPLIES

N.A

00830 WASHER FLAT/PLAIN; 1 IN NOM,1-1/16 IN ID,2-1/2 IN OD,4.2 MM(0.165 IN) THK,ALLOY STEEL,SAE,GALV,GR 8,ANSI/ASMEB18.22.1,ROUND PLAIN, 12 WASHERS/KG, PACKING SPEC 8444-21 APPLIES

N.A

00831 WASHER FLAT/PLAIN; 5/32 IN NOM,3/16 IN ID,9/16 IN OD,0.8 MM(0.031 IN) THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASMEB18.22.1,ROUND PLAIN, PACKING SPEC 8444-21 APPLIES

N.A

00832 WASHER FLAT/PLAIN; 3/16 IN NOM,1/4 IN ID,9/16 IN OD,1.2 MM(0.049 IN) THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASME B18.22.1,ROUND PLAIN, 798 WASHERS/KG, PACKING SPEC 8444-21APPLIES

N.A

00833 WASHER FLAT/PLAIN; 1/4 IN NOM,9/32 IN ID,5/8 IN OD,1.7 MM (0.065IN) THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASME B18.22.1,ROUNDPLAIN, 485 WASHERS/KG, PACKING SPEC 8444-21 APPLIES

N.A

00834 WASHER FLAT/PLAIN; 1/4 IN NOM,5/16 IN ID,47/64 IN OD,1.7 MM(0.065 IN) THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASMEB18.22.1,ROUND PLAIN, 328 WASHERS/KG, PACKING SPEC 8444-21APPLIES

N.A

00835 WASHER FLAT/PLAIN; 5/16 IN NOM,3/8 IN ID,7/8 IN OD,2.1 MM (0.083IN) THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASME B18.22.1,ROUNDPLAIN, 245 WASHERS/KG, PACKING SPEC 8444-21 APPLIES

N.A

00836 WASHER FLAT/PLAIN; 3/8 IN NOM,0.438 IN (+0.015) OR (-0.005)ID,1.00 IN (+0.030 ) OR (-0.007) OD,0.083 IN THK,ALLOYSTEEL,SAE,NATURAL,GR 8,ANSI/ASME B18.22.1,ROUND PLAIN, PACKINGSPEC 8444-21 APPLIES WIDE

N.A

00837 WASHER FLAT/PLAIN; 3/8 IN NOM,13/32 IN ID,13/16 IN OD,1.7 MM(0.065 IN) THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASMEB18.22.1,ROUND PLAIN, 150 WASHERS/KG, PACKING SPEC 8444-21

N.A

APPLIES

` 00838 WASHER FLAT/PLAIN; 3/8 IN NOM,7/16 IN ID,1 IN OD,2.1 MM (0.083IN) THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASME B18.22.1,ROUNDPLAIN, 148 WASHERS/KG, PACKING SPEC 8444-21 APPLIES

N.A

` 00839 WASHER FLAT/PLAIN; 7/16 IN NOM,15/32 IN ID,59/64 IN OD,1.7 MM(0.065 IN) THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASMEB18.22.1,ROUND PLAIN, 95 WASHERS/KG, PACKING SPEC 8444-21 APPLIES

N.A

00840 WASHER FLAT/PLAIN; 7/16 IN NOM,1/2 IN ID,1-1/4 IN OD,2.1 MM(0.083 IN) THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASMEB18.22.1,ROUND PLAIN, 90 WASHERS/KG, PACKING SPEC 8444-21 APPLIES

N.A


N.A

00842 WASHER FLAT/PLAIN; 1/2 IN NOM,17/32 IN ID,1-1/16 IN OD,2.4 MM(0.095 IN) THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASMEB18.22.1,ROUND PLAIN, 132 WASHERS/KG, PACKING SPEC 8444-21APPLIES

N.A


N.A


N.A


N.A

00846 WASHER FLAT/PLAIN; 5/8 IN NOM,11/16 IN ID,1-3/4 IN OD,3.4 MM(0.134 IN) THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASMEB18.22.1,ROUND PLAIN, 129 WASHERS/KG, PACKING SPEC 8444-21APPLIES

N.A


N.A

00848 WASHER FLAT/PLAIN; 3/4 IN NOM,13/16 IN ID,2 IN OD,3.8 MM N.A

(0.148 IN) THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASME B18.22.1,ROUNDPLAIN, 20 WASHERS/KG, PACKING SPEC 8444-21 APPLIES


N.A

00850 WASHER FLAT/PLAIN; 1 IN NOM,1-1/16 IN ID,2 IN OD,3.4 MM (0.134IN) THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASME B18.22.1,ROUNDPLAIN, 29 WASHERS/KG, PACKING SPEC 8444-21 APPLIES

N.A

00851 WASHER FLAT/PLAIN; 1 IN NOM,1-1/16 IN ID,2-1/2 IN OD,4.2 MM(0.165 IN) THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASMEB18.22.1,ROUND PLAIN, 12 WASHERS/KG, PACKING SPEC 8444-21 APPLIES

N.A

00852 WASHER FLAT/PLAIN; 1-1/8 IN NOM,1-1/4 IN ID,2-3/4 IN OD,4.2 MM(0.165 IN) THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASMEB18.22.1,ROUND PLAIN, 10 WASHERS/KG, PACKING SPEC 8444-21 APPLIES

N.A

00853 WASHER FLAT/PLAIN; 1-1/4 IN NOM,1-3/8 IN ID,3 IN OD,4.2 MM(0.165 IN) THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASMEB18.22.1,ROUND PLAIN, 8 WASHERS/KG, PACKING SPEC 8444-21 APPLIES

N.A


N.A


N.A

00856 WASHER FLAT/PLAIN; 1-3/4 IN NOM,1-7/8 IN ID,4 IN OD,4.6 MM(0.180 IN) THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASMEB18.22.1,ROUND PLAIN, 3 WASHERS/KG, PACKING SPEC 8444-21 APPLIES

N.A

00857 WASHER FLAT/PLAIN; 2 IN NOM,2.116 IN ID,3-3/4 IN OD,6.4 MM(0.250 IN) THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASMEB18.22.1,ROUND PLAIN, PACKING SPEC 8444-21 APPLIES

N.A

00858 WASHER FLAT/PLAIN; 2 IN NOM,2-1/8 IN ID,4-1/2 IN OD,4.6 MM(0.180 IN) THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASMEB18.22.1,ROUND PLAIN, 4 WASHERS/KG, PACKING SPEC 8444-21 APPLIES

N.A

00859 WASHER FLAT/PLAIN; NO 4 (0.112 IN) NOM,1/8 IN ID,1/2 IN OD,0.8

N.A

MM (0.032 IN) THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASMEB18.22.1,ROUND PLAIN, PACKING SPEC 8444-21 APPLIES

00860 WASHER FLAT/PLAIN; NO 6 (0.138 IN) NOM,5/32 IN ID,3/8 IN OD,1.2MM (0.049 IN) THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASMEB18.22.1,ROUND PLAIN, PACKING SPEC 8444-21 APPLIES

N.A


N.A

00862 WASHER FLAT/PLAIN; 1/4 IN NOM,9/32 IN ID,1/2 IN OD,1.6 MM (0.063IN) THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ ASME B18.22.1,ROUNDPLAIN, PACKING SPEC 8444-21 APPLIES

N.A

00863 WASHER FLAT/PLAIN; 5/16 IN NOM,3/8 IN ID,5/8 IN OD,2.4 MM (0.094IN)THK THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASME B18.22.1,ROUNDPLAIN, PACKING SPEC 8444-21 APPLIES

N.A

00864 WASHER FLAT/PLAIN; 3/16 IN NOM,1/4 IN ID,7/8 IN OD,2.4 MM (0.094IN) THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASME B18.22.1,ROUNDPLAIN, PACKING SPEC 8444-21 APPLIES

N.A


N.A

00866 WASHER FLAT/PLAIN; 3/8 IN NOM,0.406 IN (+0.015) OR (-0.005)ID,0.812 IN (+0.015 ) OR (-0.007) OD,0.065 IN THK,ALLOYSTEEL,SAE,NATURAL,GR 8,ANSI/ASME B18.22.1,ROUND PLAIN, PACKINGSPEC 8444-21 APPLIES NARROW

N.A

00867 WASHER FLAT/PLAIN; 7/16 IN NOM,15/32 IN ID,1-7/8 IN OD,4.8 MM(0.188 IN) THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASMEB18.22.1,ROUND PLAIN, PACKING SPEC 8444-21 APPLIES

N.A


N.A


N.A

00870 WASHER FLAT/PLAIN; 1/2 IN NOM,17/32 IN ID,1 IN OD,4.8 MM (0.188IN) THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASME B18.22.1,ROUNDPLAIN, PACKING SPEC 8444-21 APPLIES

N.A


N.A


N.A


N.A


N.A


N.A

00876 WASHER FLAT/PLAIN; 1 IN ID,1-3/8 IN OD,0.4 MM (0.016 IN)THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASME B18.22.1,ROUND PLAIN,PACKING SPEC 8444-21 APPLIES

N.A

00877 WASHER FLAT/PLAIN; 1-1/8 IN NOM,1-3/16 IN ID,2-1/16 IN OD,6.4 MM(0.250 IN) THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASME B18.22.1,ROUND PLAIN, PACKING SPEC 8444-21 APPLIES

N.A

00878 WASHER FLAT/PLAIN; 1-1/2 IN NOM,1-9/16 IN ID,2-5/8 IN OD,6.4 MM(0.250 IN) THK,ALLOY STEEL,SAE,NATURAL,GR 8,ANSI/ASMEB18.22.1,ROUND PLAIN, PACKING SPEC 8444-21 APPLIES

N.A

00879 WASHER SQUARE BEVEL; 5/8 IN NOM,2-1/2 IN SQ,0.6772 IN ID,4.8 MM(0.1875 IN) THK,CS,GALV,NEMA PH 10-77,SQUARE CURVED, PACKINGSPEC 8444-21 APPLIES

N.A

00880 WASHER SQUARE BEVEL; 5/8 IN NOM,3 IN SQ,11/16 IN ID,6.4 MM(0.2500 IN) THK,CS,GALV,NEMA PH 10-77,SQUARE CURVED, PACKINGSPEC 8444-21 APPLIES

N.A

00881 WASHER SQUARE BEVEL; 3/4 IN NOM,3 IN SQ,0.8110 IN ID,6.4 MM(0.2500 IN) THK,CS,ASTM A307,GR A,GALV,NEMA PH 10-77,SQUARECURVED

N.A

00882 WASHER SQUARE BEVEL; 7/8 IN NOM,4.0748 IN SQ,0.9704 IN ID,6.4 MM(0.2500 IN) THK,CS,ASTM A307,GR 8,GALV,NEMA PH 10-

N.A

77,SQUARECURVED, PACKING SPEC 8444-21 APPLIES

00883 WASHER SQUARE; 1/2 IN NOM,2 IN SQ,9/16 IN ID,3.2 MM (1/8 IN)THK,CS,GALV,NEMA PH 10-77,SQUARE FLAT, PACKING SPEC 8444-21APPLIES

N.A

00884 WASHER SQUARE; 5/8 IN NOM,2 IN SQ,0.670 IN ID,3.2 MM (1/8 IN)THK,CS,GALV,NEMA PH 10-77,SQUARE FLAT, PACKING SPEC 8444-21APPLIES

N.A

00885 WASHER SQUARE; 5/8 IN NOM,2-1/4 IN SQ,0.6693 IN ID,4.8 MM (3/16IN) THK,CS,GALV,NEMA PH 10-77,SQUARE FLAT, PACKING SPEC 8444-21APPLIES

N.A

00886 WASHER SQUARE; 3/4 IN NOM,4 IN SQ,0.8661 IN ID,4.8 MM (3/16 IN)THK,CS,ASTM A682M,GR AISI 1060,GALV,NEMA PH 10-77,SQUARE FLAT,PACKING SPEC 8444-21 APPLIES

N.A

00887 WASHER SQUARE; 1 IN NOM,4 IN SQ,1.142 IN ID,12.7 MM (1/2 IN)THK,CS,GALV,NEMA PH 10-77,SQUARE FLAT, PACKING SPEC 8444-21APPLIES

N.A

00888 WASHER SQUARE; 1 IN NOM,4 IN SQ,1-1/8 IN ID,6.4 MM (1/4 IN)THK,COPPER,ASTM B152,GR UNS C14200,ANSI STANDARD,SQUARE FLAT,PACKING SPEC 8444-21 APPLIES

N.A

00889 WASHER SQUARE; 9/16 IN NOM,2 IN SQ,0.559 IN ID,3.2 MM (1/8 IN)THK,SS,ASTM A666,GR UNS S30400 (AISI 304),NATURAL,SQUARE PLAIN,PACKING SPEC 8444-21 APPLIES

N.A

00890 WASHER SQUARE; 1/4 IN NOM,1 IN SQ,0.3149 IN ID,3.2 MM (1/8 IN)THK,SS,ASTM A666,GR UNS S31600 (AISI 316),NATURAL,SQUARE PLAIN,PACKING SPEC 8444-21 APPLIES

N.A

00891 WASHER LOCK; DOUBLE COIL SPRING TYPE,1/2 IN NOM,9/16 IN ID,1.035IN OD,3.2 MM (0.1250 IN) THK,CS,ASTM A682M,GR UNS G10600, AISI1060,HOT-DIP GALV,ANSI B18.21.1,4.3 MM (0.171 IN) WIDTH, PACKINGSPEC 8444-21 APPLIES

N.A

00892 WASHER LOCK; DOUBLE COIL SPRING TYPE,5/8 IN NOM,11/16 INID,0.902 IN OD,4.2 MM (0.1673 IN) THK,CS,ASTM A682M,GR UNSG10600, AISI 1060,HOT-DIP GALV,ANSI B18.21.1,PACKING

N.A

SPEC8444-21 APPLIES

00893 WASHER LOCK; DOUBLE COIL SPRING TYPE,3/4 IN NOM,13/16 INID,1.272 IN OD,5.3 MM (0.2106 IN) THK,CS,ASTM A682M,GR UNSG10600, AISI 1060,HOT-DIP GALV,ANSI B18.21.1,PACKING SPEC8444-21 APPLIES

N.A

00894 WASHER LOCK; DOUBLE COIL SPRING TYPE,7/8 IN NOM,15/16 INID,1.535 IN OD,6.9 MM (0.2716 IN) THK,CS,ASTM A682M,GR UNSG10600, AISI 1060,HOT-DIP GALV,ANSI B18.21.1

N.A

00895 WASHER LOCK; HELICAL SPRING, REGULAR TYPE,1-5/8 IN NOM,1-43/64IN ID,2.650 IN OD,12.1 MM (0.475 IN) THK,CS,ZINC PLATED,ANSIB18.21.1,REGULAR SERIES, PACKING SPEC 8444-21 APPLIES

N.A

00896 WASHER LOCK; HELICAL SPRING, REGULAR TYPE,2 IN NOM,2.025 INID,2-7/8 IN OD,10.0 MM (0.3937 IN) THK,CS,ZINC PLATED,ANSI B18.21.1,REGULAR SERIES, PACKING SPEC 8444-21 APPLIES

N.A

00897 WASHER FLAT/PLAIN; 1/4 IN ID,3/8 IN OD,0.4 MM (0.015 IN)THK,CS,ASTM F844 OR F436,NATURAL,ROUND PLAIN, SPACING WASHER,PACKING SPEC 8444-21 APPLIES

N.A

00898 WASHER FLAT/PLAIN; 5/16 IN ID,9/16 IN OD,0.4 MM (0.015 IN)THK,CS,ASTM F844 OR F436,NATURAL,ROUND PLAIN, SPACING, PACKINGSPEC 8444-21 APPLIES

N.A


N.A


N.A


N.A


N.A

00903 WASHER FLAT/PLAIN; 5/8 IN ID,7/8 IN OD,0.4 MM (0.015 IN)THK,CS,ASTM F884 OR F436,NATURAL,ROUND PLAIN, SPACING WASHER,

N.A

PACKING SPEC 8444-21 APPLIES

00904 WASHER FLAT/PLAIN; 3/4 IN ID,1 IN OD,0.4 MM (0.015 IN)THK,CS,ASTM F844 OR F436,NATURAL,ROUND PLAIN, SPACING WASHER,PACKING SPEC 8444-21 APPLIES

N.A

00905 WASHER FLAT/PLAIN; 7/8 IN ID,1-1/8 IN OD,0.4 MM (0.015 IN)THK,CS,ASTM F844 OR F436,NATURAL,ROUND PLAIN, SPACING WASHER,PACKING SPEC 8444-21 APPLIES

N.A

00906 WASHER LOCK; SPRING TYPE,1/2 IN NOM,37/64 IN ID,1.142 IN OD,5.0MM (0.1968 IN) THK,CS,ASTM A682M,GR UNS G10600, AISI1060,GALV,PACKING SPEC 8444-21 APPLIES

N.A

00907 WASHER; SPRING TYPE,3/4 IN ID,AA 5.72 MM (0225 IN) THK,CS,ASTMA682M,GR UNS G10600, AISI 1060,FOR 5/8 IN DIAMETER BOLT, 45.1 MM(1-3/4 IN) WIDTH. PACKING SPEC 8444-21 APPLIES

N.A

00908 WASHER LOCK; SPRING TYPE,3/4 IN NOM,0.866 IN ID,1.772 IN OD,6.7MM (0.2657 IN) THK,CS,ASTM A682M,GR UNS G10600, AISI1060,GALV,PACKING SPEC 8444-21 APPLIES

N.A

00909 WASHER LOCK; SPRING TYPE,7/8 IN NOM,0.965 IN ID,1-51/64 INOD,6.9 MM (0.2736 IN) THK,CS,ASTM A682M,GR UNS G10600, AISI1060,GALV,PACKING SPEC 8444-21 APPLIES

N. A

00910 WASHER; ASSORTMENT TYPE,5/16 TO 1-3/8 IN ID,7/16 TO 1-7/16 INOD,0.4-0.8 MM (0.0162-0.0312 IN) THK,COPPER,CONTAINS 14VARIETIES, VARIOUS SIZES & THICKNESS, PACKING SPEC 8444-21APPLIES KITS.COMPONENTS........... CONSISTING OF: ITEMBOLT SZ. ID. OD. TH. 1 1/4 5/16 7/16 1/162 5/16 21/64 1/2 1/16 3 3/8 13/32 5/81/16 4 3/8 7/16 13/16 1/16 5 7/16 29/6411/16 1/32 6 7/16 15/32 13/16 1/16 7 1/233/64 45/64 1/32 8 1/2 33/64 13/16 1/32 91/2 17/32 13/16 1/16 10 1/2 9/16 13/16 1/3211 9/16 39/64 13/16 1/32 12 5/8 21/32 1--1/16 13 7/8 1-- 1- 1/4 1/16 14 1-1/4 1- 3/8 1-5/8 1/16

N.A

`00911 WASHER NON-METALLIC; ASSORTMENT TYPE,NO 8 NOM,0.1875-1 INID,9.5-31.8 MM (3/8 TO 1-1/4 IN) OD,0.8 MM (0.0315 IN)THK,FIBER,NATURAL,HARD, 1000 PIECES, 23 SIZE, PACKING SPEC8444-21 APPLIES KITS.COMPONENTS...........CONSISTING OF ITEM WASHER SIZE IN. 1 3/8 OD, 3/16ID. 2 3/8 OD, 1/4 ID. 3 7/16 OD, 5/16 ID. 41/2 OD, 1/4 ID. 5 1/2 OD, 3/8 ID. 6 9/16 OD,5/16 ID. 7 5/8 OD, 3/8 ID. 8 5/8 OD, 7/16 ID. 95/8 OD, 1/2 ID. 10 11/16 OD, 1/2 ID. 11 3/4 OD,1/2 ID. 12 3/4 OD, 5/8 ID. 13 25/32 OD, 21/32 ID. 1413/16 OD, 9/16 ID. 15 13/16 OD, 5/8 ID. 16 7/8 OD,

N.A

5/8 ID. 17 7/8 OD, 21/32 ID. 18 15/16 OD, 11/16 ID. 191-1/16 OD, 3/4 ID. 20 1-1/8 OD, 13/16 ID. 21 1-3/16 OD,7/8 ID. 22 1-1/4 OD, 15/16 ID. 23 1-1/4 OD, 1-- ID.

00912 WASHER NON-METALLIC; ASSORTMENT TYPE,NO 4 NOM,1/8 TO 1 INID,6.4-36.5 MM (1/4 TO 1-7/16 IN) OD,0.8-2.4 MM (0.0313-0.0937IN) THK,FIBER,VARIOUS SIZES & THICKNESSES, PACKING SPEC 8444-21APPLIES KITS.COMPONENTS........... CONSISTING OF: ITEMWASHER SIZE IN. 1 1/4 OD, 1/8 ID, 1/32 TH. 2 9/32OD, 3/16 ID, 1/16 TH. 3 3/8 OD, 3/16 ID, 1/32 TH. 47/16 OD, 1/4 ID, 1/32 TH. 5 1/2 OD, 9/32 ID, 3/64 TH.6 1/2 OD, 5/16 ID, 1/32 TH. 7 9/16 OD, 7/32 ID, 1/32TH. 8 9/16 OD, 5/16 ID, 1/32 TH. 9 9/16 OD, 3/8 ID,1/32 TH. 10 5/8 OD, 3/16 ID, 1/64 TH. 11 11/16 OD, 3/8ID, 3/64 TH. 12 3/4 OD, 1/2 ID, 1/16 TH. 13 3/4 OD,9/16 ID, 1/32 TH. 14 7/8 OD, 1/2 ID, 1/16 TH. 15 7/8OD, 9/16 ID, 1/16 TH. 16 7/8 OD, 5/8 ID, 3/64 TH. 171-- OD, 5/8 ID, 1/16 TH. 18 1-1/8 OD, 3/4 ID, 3/64TH. 19 1-1/16 OD, 19/32 ID, 1/16 TH. 20 1-3/16 OD, 3/4 ID,1/16 TH. 21 1-3/16 OD, 7/8 ID, 1/16 TH. 22 1-5/16 OD, 7/8ID, 3/32 TH. 23 1-5/16 OD, 1-- ID, 1/16 TH. 24 1-7/16 OD,1-- ID, 3/32 TH.

N.A

00913 WASHER LOCK; CONICAL SPRING TYPE,5/8 IN NOM,0.650 IN ID,1.142 INOD,3.2 MM (0.125 IN) THK,SS,ASTM A693,GR TYPE 631, 17-7 PH, UNSS17700, AISI 1050,HEAT TREATED,FOR CRYOGENIC SERVICE, 3.6 MM(0.143 IN) OVERALL HT, -255 DEG C (-428 DEG F) T0 300 DEG C (572F) OPERATING TEMPERATURE, PACKING SPEC 8444-21 APPLIES

N.A

00914 WASHER LOCK; CONICAL SPRING TYPE,3/4 IN NOM,0.783 IN ID,1.366 INOD,3.3 MM (0.131 IN) THK,SS,ASTM A693,GR TYPE 631, 17-7 PH, UNSS17700, AISI 1050,HEAT TREATED,FOR CRYOGENIC SERVICE, 3.8 MM (0.150 IN) OVERALL HT, -255 DEG C (-428 DEG F) T0 300 DEG C (572DEG F) OPERATING TEMPERATURE, PACKING SPEC 8444-21 APPLIES

N.A

00915 WASHER LOCK; CONICAL SPRING TYPE,7/8 IN NOM,0.906 IN ID,1.685 INOD,3.8 MM (0.150 IN) THK,SS,ASTM A693,GR TYPE 631, 17-7 PH, UNSS17700, AISI 1050, CONDITION TH 1050,HEAT TREATED,FOR CRYOGENICSERVICE, 4.6 MM (0.180 IN) OVERALL HT, -255 DEG C (-428 DEG F)TO 300 DEG C (527 DEG F) OPERATING TEMPERATURE, PACKING SPEC8444-21 APPLIES

N.A

00916 WASHER LOCK; CONICAL SPRING TYPE,1 IN NOM,1.043 IN ID,1.805 INOD,4.3 MM (0.168 IN) THK,SS,ASTM A693,GR TYPE 631, 17-7 PH, UNSS17700, AISI 1050, CONDITION TH 1050,HEAT TREATED,FOR CRYOGENIC

N.A

SERVICE, 5.0 MM (0.195 IN) OVERALL HT, -255 DEG C (-428 DEG F)T0 300 DEG C (572 DEG F) OPERATING TEMPERATURE, PACKING SPEC8444-21 APPLIES

00917 WASHER LOCK; CONICAL SPRING TYPE,1-1/8 IN NOM,1.161 IN ID,2.020IN OD,4.7 MM (0.187 IN) THK,SS,ASTM A693,GR TYPE 631, 17-7 PH,UNS S17700, AISI 1050, CONDITION TH 1050,HEAT TREATED,FORCRYOGENIC SERVICE, 5.5 MM (0.217 IN) OVERALL HT, -255 DEG C(-428 DEG F) TO 300 DEG C (572 DEG F) OPERATING TEMPERATURE,PACKING SPEC 8444-21 APPLIES

N.A

00918 WASHER LOCK; CONICAL SPRING TYPE,1-1/4 IN NOM,1.278 IN ID,2.240IN OD,4.8 MM (0.190 IN) THK,SS,ASTM A693,GR TYPE 631, 17-7 PH,UNS S17700, AISI 1050, CONDITION TH 1050,HEAT TREATED,FORCRYOGENIC SERVICE, 5.7 MM (0.225 IN) OVERALL HT, -55 DEG C (-428DEG F) T0 300 DEG C (572 DEG F) OPERATING TEMPERATURE, PACKING SPEC 8444-21 APPLIES

N.A

00919 WASHER LOCK; CONICAL SPRING TYPE,1-1/2 IN NOM,1.535 IN ID,2.680IN OD,6.2 MM (0.244 IN) THK,SS,ASTM A693,GR TYPE 631, 17-7 PH,UNS S17700, AISI 1050, CONDITION TH 1050,HEAT TREATED,FORCRYOGENIC SERVICE, 7.2 MM (0.285 IN) OVERALL HT, -255 DEG C(-428 DEG F) T0 300 DEG C (572 DEG F) OPERATING TEMPERATURE,PACKING SPEC 8444-21 APPLIES

N.A

00920 WASHER LOCK; CONICAL SPRING TYPE,1-5/8 IN NOM,1-21/32 INID,2.950 IN OD,6.7 MM (0.262 IN) THK,SS,ASTM A693,GR TYPE 631,17-7 PH, UNS S17700, AISI 1050,HEAT TREATED,FOR CRYOGENICSERVICE, 7.8 MM (0.307 IN) OVERALL HT, -255 DEG C (-428 DEG F)T0 300 DEG C (572 DEG F) OPERATING TEMPERATURE, PACKING SPEC8444-21 APPLIES

N.A

00921 WASHER LOCK; CONICAL SPRING TYPE,1-3/4 IN NOM,1.785 IN ID,3.158IN OD,7.1 MM (0.281 IN) THK,SS,ASTM A693,GR TYPE 631, 17-7 PH,UNS S17700, AISI 1050, CONDITION TH 1050,HEAT TREATED,FORCRYOGENIC SERVICE, 8.4 MM (0.329 IN) OVERALL HT, -255 DEG C(-428 DEG F) TO 300 DEG C (527 DEG F) OPERATING TEMPERATURE,PACKING SPEC 8444-21 APPLIES

N.A

00922 WASHER LOCK; CONICAL SPRING TYPE,1-7/8 IN NOM,1.898 IN ID,3.380IN OD,8.7 MM (0.3425 IN) THK,SS,ASTM A693,GR TYPE 631, 17-7 PH,UNS S17700, AISI 1050, CONDITION TH 1050,HEAT TREATED,FORCRYOGENIC SERVICE, 9.0 MM (0.353 IN) OVERALL HT, -255 DEG C(-428 DEG F) T0 300 DEG C (572 DEG F) OPERATING TEMPERATURE,PACKING SPEC 8444-21 APPLIES

N.A

00923 WASHER NON-METALLIC; ASSORTMENT TYPE,2.4 - 25.4 MM (3/32 - 1 IN)ID,6.4 - 33.3 MM (1/4 - 1-5/16 IN) OD,0.8 -1.6 MM (1/32 - 1/16IN) THK,FIBER,NATURAL,CONTAINS 312 PIECES, 34 VARIETIES, SPEC8444-21 APPLIES

N.A

00924 WASHER LOCK; ASSORTMENT TYPE,4-12 MM NOM,4.7-13.7 MM ID,8.8-23.8MM OD,0.85-1.4 MM THK,STEEL,NATURAL,CONTAINS 7 VARIETIES, SIZESM4, M5, M6, M7, M8, M10, & M12 METRIC, ROUND FLAT LOCK & CONICALSPRING TYPES, BLUE, EQUAL TO BOWMAN BP-293, PACKING SPEC 8444-21APPLIES

N.A

00925 NUT WING; 3/8-16,BRASS,ASTM F467,GR UNS C27000,NATURAL,3/8 INDIA,16 THD,UNC-2B THD SER,ANSI/ASME B18.17

N.A

00926 WASHER FLAT/PLAIN; NO 12 (0.216 IN) NOM,1/4 IN ID,9/16 IN OD,1.7MM (0.065 IN) THK,SS,GR TYPE 304,ANSI/ASME B18.22.1,TYPE A, 140HV MIN

N.A

00929 WASHER LOCK; SPRING, CURVED TYPE,30 MM NOM,30.5-31.7 MM ID,48.2MM OD,6.0 MM THK,SPRING STEEL,DIN 128 A,BLACK,METRIC

N.A

00930 WASHER LOCK; SPRING, CURVED TYPE,12 MM NOM,12.2-12.7 MM ID,21.1MM OD,2.1 MM THK,SPRING STEEL,DIN 128 A,BLACK,METRIC

N.A

00931 WASHER LOCK; HELICAL SPRING, REGULAR TYPE,16 MM NOM,16.5 MMID,27 MM OD,4 MM THK,CARBON STEEL,NATURAL,BS 4464

N.A

00932 NUT LOCK; HEX, STYLE 1 NUT,M12 X 1.25,CS,ISO 2320 OR DIN 267-15OR ANSI B18.16.1M,GR 8,NATURAL AND OILED,ELASTIC COLLAR,12 MMDIA,1.25 MM PITCH THD,ISO METRIC FINE-6H THD SER,ISO 7719 OR DIN980 OR ANSI B18.16.3M,ALL-METAL, WITH COLLAR SECURELY WELDED

N.A

INTO HEAD

00992 NUT HEX; 1/2-13,SS,ASTM F594,GR UNS S41000 (TYPE 410),CONDITIONH,1/2 IN DIA,13 THD,UNC-2B THD SER,ANSI/ASME B18.2.2

N.A

00993 NUT HEX; STYLE 1,M12 X 1.75,SS,ISO 3506 OR ASTM F836M,GR A2(TYPE 347),CONDITION SH,12 MM DIA,1.75 MM PITCH THD,ISO METRICCOARSE-6H THD SER,ISO 4032,STYLE 1

N.A

00994 NUT HEX; 1/2-13,MONEL,ASTM F467,GR UNS N05500,NATURAL,1/2 INDIA,13 THD,UNC-2B THD SER,ANSI/ASME B18.2.2

N.A

00995 NUT HEX; 5/8-11,SS,ASTM F594,GR UNS S41000 (TYPE 410),CONDITIONH,5/8 IN DIA,11 THD,UNC-2B THD SER,ANSI/ASME B18.2.2

N.A

00996 NUT HEX; STYLE 1,M20 X 2.5,CS,ISO 4032,GR 10,PHOSPHATED & LIGHTOILED,20 MM DIA,2.5 MM PITCH THD,ISO METRIC COARSE-6H THD SER

N.A


N.A

00998 NUT HEX; STYLE 1,M24 X 3,CS,ISO 4032,GR 10,PHOSPHATED & LIGHTOILED,24 MM DIA,3 MM PITCH THD,ISO METRIC COARSE-6H THD SER

N.A


N.A

01000 RIVET; FULL TUBULAR TYPE,5 MM DIA,12 MM LG,9.5 MM HD DIA,FLATCOUNTERSUNK HEAD,BRASS,ASTM B-16M H02,GR GRC360001A,NATURAL,ANSI B18.7,USE FOR 30T TRUCK CRANE TAG# YMA68,

N.A

02663 KIT; INSERT TYPE,FOR INSTALLATION,INCLUDES, ASSORTMENT, FINE &COARSE THRDS COMB, CONTAINS (170) PC, (10) SIZES, (5) FINE & (5)COARSE THRDS, 1/4 IN, 5/16 IN, 3/8 IN, 7/16 IN & 1/2 IN,INSTALLATION TOOL KIT

N.A

02684 WASHER; PRE-LOAD TYPE,13.5 MM ID,39 MM OD,2.5 MM THK,STAINLESSSTEEL,GR AISI 410S

N.A

02685 RING; THRUST TYPE,SIZE 44 MM ID X 56 MM OD X 1 MM THK,SS,REF #6,SPARE PART FOR RABIGH COMMUNITY POWER PLANT FUEL FORWARDING PUMP

N.A

02694 RING RETAINING INTERNAL; CIRCLIP TYPE,CARBON STEEL,PLATEDFINISH,333 PIECE ZINC-PLATED-25 SIZES, FOR BORE DIAMETERS: 3/8IN, 7/16IN, 1/2 IN, 5/8 IN, 11/16 IN, 3/4 IN, 13/16 IN, 7/8 IN,

N.A

1 IN, 1-1/16 IN, 1-1/8 IN 1-1/4 IN, 1-3/8 IN, 1-1/2 IN, 1-5/8IN, 1-3/4 IN, 1-7/8 IN, 2 IN, 2-1/4 IN, 2-3/8 IN, 2-1/2 IN,2-5/8 IN, 2-3/4 IN, 2-7/8 IN, AND 3 IN.

02701 NUT LOCK; HEX NUT,NO 5-40,BRASS,NATURAL,NO 5 DIA,40 THD,UNC THDSER

N.A

02702 NUT LOCK; HEX NUT,M16 X 2 MM,BRASS,NATURAL,16 MM DIA,2 MM PITCHTHD,UNC THD SER

N.A

02703 NUT LOCK; HEX NUT,BRASS,NATURAL,40 MM DIA N.A

02704 NUT LOCK; HEX NUT,BRASS,NATURAL,50 MM DIA,THREADING, 65 MM OD

N.A

02708 WASHER; THRUST TYPE,27.5 MM ID,40.6 MM OD,1.5 MM THK,STEEL,DU,FOR 3 IN X 2 IN CL 300

N.A

02709 WASHER LOCK; FOR FEED PUMP N.A

02713 RING; SNAP TYPE,SIZE 61 MM ID X 65 MM OD X 2 MM THK,SS,REF #8

N.A

02714 RING RETAINING INTERNAL; CIRCLIP TYPE,CARBON STEEL,PLATEDFINISH,SET, 14 PCS OF ASSORTED SIZES

N.A

02723 WASHER FLAT/PLAIN; 3/8 IN NOM,25/64 IN ID,3/4 IN OD,1/16 INTHK,NYLON

N.A

02727 RIVET; 3.5 MM LONG 100 PC/PK N.A

02734 WASHER FLAT/PLAIN; 3/8 IN NOM,INCONEL 625 OR INCOLOY 825,ASTMB446 N06625 OR ASTM B425 N08825,GR 1

N.A

LOOKING FORWARD FOR YOUR QUOTATION.

Regards, SALES CONTACTManisha ARIF MOHAMMADSALES CO-ORDINATOR (COUNTRY MANAGER)

MOBILE - +966 555 839 925

Conti….

· Web viewSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDES KOHINOOR INC (TRUARC)...

Documents

Transcript of · Web viewSTEEL,ASTM A682M,OIL DIPPED FINISH,UNS G10600, AISI 1060,WALDES KOHINOOR INC (TRUARC)...