View rates - SUPERIOR Manufacturing
3
PIPELAYERS MODEL CAPACITY SHIP WT. 4-WEEK WEEKLY Caterpillar CPX-561D/E 40,000 35,000 $7,500 $2,500 Caterpillar 561N/M/H 40,000 34,600 $7,500 $2,500 CAT SP-D5M/N LGP 40,000 38,000 $8,500 $2,850 Caterpillar CPX-571G 60,600 50,800 $8,500 $2,850 CAT SP-D6M/N LGP 60,600 55,000 $9,500 $3,150 Caterpillar 572E 90,000 61,300 $8,500 $2,850 SUPERIOR CPX-572 90,000 61,300 $10,500 $3,500 SUPERIOR SPX-460 97,000 66,150 $11,500 $3,850 Caterpillar 583K/H 140,000 90,300 $12,000 $4,000 SUPERIOR SP-583 140,000 90,300 $13,500 $4,500 SUPERIOR SPX-660 143,950 99,210 $13,500 $4,500 Caterpillar 583R 140,000 98,650 $13,500 $4,500 Caterpillar 594H/G 200,000 123,600 $17,000 $5,700 SUPERIOR SP-594 200,000 123,600 $17,500 $5,850 SUPERIOR SPX-960 213,840 136,685 $18,500 $6,150 PADDING MACHINES MODEL CAPACITY 4-WEEK WEEKLY SPD-150 Utility $30,000 $10,000 SPD-250 2”-24” $40,000 $13,350 SPD-350 6”-48” $50,000 $16,650 SPD-450 12”-60” $60,000 $20,000 Padding Buckets MODEL CAPACITY 4-WEEK WEEKLY SBP-25 2.5 cu. yd. $6,000 $2,000 SBP-15 1.5 cu. yd. $5,000 $1,650 WELDING TRACTORS MODEL SIZE 4-WEEK WEEKLY D6D/D6E (4) Lincoln DC400 $8,500 $2,500 Gen., Comp., Crane Challenger 75E (4) Lincoln DC400 $8,500 $2,500 Challenger 65E (4) Lincoln DC400 $8,500 $2,500 SUPERIOR SFT-180W (4) Lincoln/Miller P.O.R. P.O.R. D6E SC (4) 350 Lincoln $9,500 $3,150 FLAT BED TRACTORS SRT (Rubber U/C) & SFT (Tracked U/C) P.O.R. We offer different configurations for the SRT/SFT-Series: Welder package, induction heating, sand-blasting and pipe carrier. Packages are integrated components. PIPE CARRIERS MODEL 4-WEEK WEEKLY SPC-D60 $8,800 $2,950 SPC-D70 $12,500 $4,150 SPC-D80 $15,600 $5,200 VACUUM LIFTS MODEL CAPACITY 4-WEEK WEEKLY SVL-90 19,842 lbs. (9 ton) $5,800 $1,950 SVL-130 28,660 lbs. (13 ton) $6,800 $2,250 SVL-220 48,502 lbs. (22 ton) $7,800 $2,600 Suction Pads MODEL PIPE RANGE CAPACITY 4-WEEK WEEKLY PD 4 4” 2,750 $750 $250 PD 6-8 6”-8” 3,525 $750 $250 PD 10-14 10”-14” 6,610 $800 $275 PD 16-22 16”-22” 8,810 $900 $300 PD 24-32 24”-32” 13,220 $1,100 $400 PD 34-42 34”-42” 16,975 $1,300 $450 PD 42-48 42”-48” 25,460 $1,600 $550 PD 50-54/56-62 50”-54”/56”-62” 33,050/39,650 P.O.R. P.O.R. PIPE BENDING MACHINES MODEL SIZE SHIP WT. 4-WEEK WEEKLY SPB 6-20 Standard 6”-20” 11,250 $4,500 $1,500 SPB 6-20 Millennium 6”-20” 11,250 $5,500 $1,850 SPB 16-30 Millennium 16”-30” 37,475 $9,500 $3,200 SPB 22-36 Millennium 22”-36” 59,525 $12,500 $4,150 SPB 32-42 Millennium 32”-42” 95,900 $18,500 $6,150 SPB 36-48 Millennium 36”-48” 150,000 P.O.R. P.O.R. SPB 48-60 Millennium 48”-60” 189,000 P.O.R. P.O.R. BORING MACHINES We offer various models. Please contact us for a quote. PIPE FACING MACHINES MODEL PIPE SIZE 4-WEEK SFM 6-14 6”-14” $8,000-$8,500 SFM 16-32 16”-32” $9,500-$12,500 SFM 34-48 34”-48” $12,500-$16,000 SFM 48-60 48”-60” $16,500-$25,000 PIPE FACING CLAMPS MODEL PIPE SIZE 4-WEEK SMC 6-10 6”-10” P.O.R. SMC 10-14 10”-14” P.O.R. SMC 16-22 16”-22” P.O.R. SMC 24-32 24”-32” P.O.R. SMC 34-40 34”-40” P.O.R. SMC 42-48 42”-48” P.O.R. SMC 48-50 48”-50” P.O.R. SMC 56-60 56”-60” P.O.R. BENDING SETS 6-20 INCH P.B. 4-WEEK (BARE) 4-WEEK (LINED) 6” $550 $800 8” $580 $950 10” $625 $1,075 12” $650 $1,115 14” $715 $1,325 16” $835 $1,350 18” $950 $1,635 20” Bare Die $750 - 20” Lined Die & Liner - $1,500 16-30 INCH P.B. 4-WEEK (BARE) 4-WEEK (LINED) 16” $1,050 $2,225 18” $1,125 $2,275 20” $1,175 $2,305 22” $1,300 $2,450 24” $1,385 $2,455 26” $1,905 $2,950 28” $1,985 $3,150 30” Bare Die $1,525 - 30” Lined Die & Liner - $3,235 22-36 INCH P.B. 4-WEEK (BARE) 4-WEEK (LINED) 22” $1,365 $2,950 24” $1,450 $3,025 26” $1,950 $3,185 28” $2,050 $3,325 30” $2,150 $3,450 32” $2,225 $3,550 34” $2,285 $3,750 36” Bare Die $1,855 - 36” Lined Die & Liner - $3,650 32-42 INCH P.B. 4-WEEK (BARE) 4-WEEK (LINED) 32” $3,050 $4,550 34” $3,550 $5,050 36” $3,000 $4,050 38” $3,550 $4,450 40” $3,050 $4,550 42” Bare Die $3,050 - 42” Lined Die & Liner - $4,350 36-48 INCH P.B. 4-WEEK (BARE) 4-WEEK (LINED) 36” $3,050 $5,300 38” $3,550 $5,400 40” $3,350 $5,400 42” $3,500 $5,400 44” $3,500 $5,400 46” $3,500 $5,575 48” Bare Die $4,800 - 48” Lined Die & Liner - $5,500 48-60 INCH P.B. 4-WEEK (BARE) 4-WEEK (LINED) 48” $5,150 $5,750 50” $5,400 $5,800 52” $5,400 $5,950 54” $5,600 $6,100 56” $5,750 $6,250 58” $5,750 $6,300 60” Bare Die $6,000 - 60” Lined Die & Liner - $6,550 INTERNAL LINE-UP CLAMPS SIZE (STAND-BY) 4-WEEK 4-WEEK 8” $2,550 $2,350 10” $2,750 $2,400 12”-14” $2,950 $2,550 14”-16” $4,000 $3,100 16”-18” $5,800 $4,600 16”-18” powered - $5,450 20”-22” $6,550 $5,550 24”-26” $7,500 $6,355 Powered for the rest of the items 28”-30” $8,000 $6,800 30”-32” $8,000 $6,800 34”-36” $9,000 $7,650 38”-40” $14,000 $11,900 40”-42” $14,000 $11,900 42”-44” $16,000 $14,450 46”-48” $17,000 $14,450 50”-52” P.O.R. P.O.R. 54”-56” P.O.R. P.O.R. 58”-60” P.O.R. P.O.R. MANDRELS M=Manual Line Travel ALT=Automatic Line Travel SIZE PNEUMATIC 4-WEEK HYDRAULIC 4-WEEK Standard 10”-12”-M $3,600/$3,700 $3,800/$3,800 14”-16”-M $3,900/$4,600 $4,400/$4,900 14”-16” ALT - $4,750/$5,300 18”-20”M $4,800/$5,450 $5,000/$5,500 18”-20” ALT - $5,550/$6,000 20”-22” ALT - $5,550/$6,000 Automatic Line Travel (24”-26” and above) 24”-26” - $7,000/$7,000 28”-30” - $7,500/$7,500 30”-32” - $7,500/$8,000 2013 RATES WWW.WORLDWIDEMACHINERY.COM PIPELINE SPECIALTY U.S. TOLL FREE 800.383.2666 I PHONE 281.457.4400 [email protected]
Transcript of View rates - SUPERIOR Manufacturing
PIPELAYERS MODEL CAPACITY SHIP WT. 4-WEEK WEEKLYCaterpillar CPX-561D/E 40,000 35,000 $7,500 $2,500Caterpillar 561N/M/H 40,000 34,600 $7,500 $2,500CAT SP-D5M/N LGP 40,000 38,000 $8,500 $2,850Caterpillar CPX-571G 60,600 50,800 $8,500 $2,850CAT SP-D6M/N LGP 60,600 55,000 $9,500 $3,150Caterpillar 572E 90,000 61,300 $8,500 $2,850SUPERIOR CPX-572 90,000 61,300 $10,500 $3,500SUPERIOR SPX-460 97,000 66,150 $11,500 $3,850Caterpillar 583K/H 140,000 90,300 $12,000 $4,000SUPERIOR SP-583 140,000 90,300 $13,500 $4,500SUPERIOR SPX-660 143,950 99,210 $13,500 $4,500Caterpillar 583R 140,000 98,650 $13,500 $4,500Caterpillar 594H/G 200,000 123,600 $17,000 $5,700SUPERIOR SP-594 200,000 123,600 $17,500 $5,850SUPERIOR SPX-960 213,840 136,685 $18,500 $6,150
PADDING MACHINES MODEL CAPACITY 4-WEEK WEEKLYSPD-150 Utility $30,000 $10,000 SPD-250 2”-24” $40,000 $13,350SPD-350 6”-48” $50,000 $16,650SPD-450 12”-60” $60,000 $20,000Padding BucketsMODEL CAPACITY 4-WEEK WEEKLYSBP-25 2.5 cu. yd. $6,000 $2,000SBP-15 1.5 cu. yd. $5,000 $1,650
WELDING TRACTORS MODEL SIZE 4-WEEK WEEKLYD6D/D6E (4) Lincoln DC400 $8,500 $2,500 Gen., Comp., CraneChallenger 75E (4) Lincoln DC400 $8,500 $2,500Challenger 65E (4) Lincoln DC400 $8,500 $2,500SUPERIOR SFT-180W (4) Lincoln/Miller P.O.R. P.O.R.D6E SC (4) 350 Lincoln $9,500 $3,150
FLAT BED TRACTORS SRT (Rubber U/C) & SFT (Tracked U/C) P.O.R.We offer different configurations for the SRT/SFT-Series: Welder package, induction heating, sand-blasting and pipe carrier. Packages are integrated components.
PIPE CARRIERS MODEL 4-WEEK WEEKLYSPC-D60 $8,800 $2,950 SPC-D70 $12,500 $4,150SPC-D80 $15,600 $5,200
VACUUM LIFTS MODEL CAPACITY 4-WEEK WEEKLYSVL-90 19,842 lbs. (9 ton) $5,800 $1,950SVL-130 28,660 lbs. (13 ton) $6,800 $2,250SVL-220 48,502 lbs. (22 ton) $7,800 $2,600Suction PadsMODEL PIPE RANGE CAPACITY 4-WEEK WEEKLYPD 4 4” 2,750 $750 $250 PD 6-8 6”-8” 3,525 $750 $250PD 10-14 10”-14” 6,610 $800 $275PD 16-22 16”-22” 8,810 $900 $300PD 24-32 24”-32” 13,220 $1,100 $400PD 34-42 34”-42” 16,975 $1,300 $450PD 42-48 42”-48” 25,460 $1,600 $550PD 50-54/56-62 50”-54”/56”-62” 33,050/39,650 P.O.R. P.O.R.
PIPE BENDING MACHINES MODEL SIZE SHIP WT. 4-WEEK WEEKLYSPB 6-20 Standard 6”-20” 11,250 $4,500 $1,500SPB 6-20 Millennium 6”-20” 11,250 $5,500 $1,850SPB 16-30 Millennium 16”-30” 37,475 $9,500 $3,200SPB 22-36 Millennium 22”-36” 59,525 $12,500 $4,150SPB 32-42 Millennium 32”-42” 95,900 $18,500 $6,150SPB 36-48 Millennium 36”-48” 150,000 P.O.R. P.O.R.SPB 48-60 Millennium 48”-60” 189,000 P.O.R. P.O.R.
BORING MACHINES We offer various models. Please contact us for a quote. PIPE FACING MACHINES MODEL PIPE SIZE 4-WEEKSFM 6-14 6”-14” $8,000-$8,500SFM 16-32 16”-32” $9,500-$12,500SFM 34-48 34”-48” $12,500-$16,000SFM 48-60 48”-60” $16,500-$25,000
PIPE FACING CLAMPS MODEL PIPE SIZE 4-WEEKSMC 6-10 6”-10” P.O.R. SMC 10-14 10”-14” P.O.R.SMC 16-22 16”-22” P.O.R.SMC 24-32 24”-32” P.O.R.SMC 34-40 34”-40” P.O.R.SMC 42-48 42”-48” P.O.R.SMC 48-50 48”-50” P.O.R.SMC 56-60 56”-60” P.O.R.
BENDING SETS 6-20 INCH P.B. 4-WEEK (BARE) 4-WEEK (LINED)6” $550 $8008” $580 $95010” $625 $1,07512” $650 $1,11514” $715 $1,32516” $835 $1,35018” $950 $1,63520” Bare Die $750 -20” Lined Die & Liner - $1,50016-30 INCH P.B. 4-WEEK (BARE) 4-WEEK (LINED)16” $1,050 $2,22518” $1,125 $2,27520” $1,175 $2,30522” $1,300 $2,45024” $1,385 $2,45526” $1,905 $2,95028” $1,985 $3,15030” Bare Die $1,525 -30” Lined Die & Liner - $3,23522-36 INCH P.B. 4-WEEK (BARE) 4-WEEK (LINED)22” $1,365 $2,95024” $1,450 $3,02526” $1,950 $3,18528” $2,050 $3,32530” $2,150 $3,45032” $2,225 $3,55034” $2,285 $3,75036” Bare Die $1,855 -36” Lined Die & Liner - $3,65032-42 INCH P.B. 4-WEEK (BARE) 4-WEEK (LINED)32” $3,050 $4,55034” $3,550 $5,05036” $3,000 $4,05038” $3,550 $4,45040” $3,050 $4,55042” Bare Die $3,050 -42” Lined Die & Liner - $4,35036-48 INCH P.B. 4-WEEK (BARE) 4-WEEK (LINED)36” $3,050 $5,30038” $3,550 $5,40040” $3,350 $5,40042” $3,500 $5,40044” $3,500 $5,40046” $3,500 $5,57548” Bare Die $4,800 -48” Lined Die & Liner - $5,50048-60 INCH P.B. 4-WEEK (BARE) 4-WEEK (LINED)48” $5,150 $5,75050” $5,400 $5,80052” $5,400 $5,95054” $5,600 $6,10056” $5,750 $6,25058” $5,750 $6,30060” Bare Die $6,000 -60” Lined Die & Liner - $6,550
INTERNAL LINE-UP CLAMPS SIZE (STAND-BY) 4-WEEK 4-WEEK8” $2,550 $2,35010” $2,750 $2,40012”-14” $2,950 $2,55014”-16” $4,000 $3,10016”-18” $5,800 $4,60016”-18” powered - $5,45020”-22” $6,550 $5,55024”-26” $7,500 $6,355Powered for the rest of the items28”-30” $8,000 $6,80030”-32” $8,000 $6,80034”-36” $9,000 $7,65038”-40” $14,000 $11,90040”-42” $14,000 $11,90042”-44” $16,000 $14,45046”-48” $17,000 $14,45050”-52” P.O.R. P.O.R.54”-56” P.O.R. P.O.R.58”-60” P.O.R. P.O.R.
MANDRELS M=Manual Line Travel ALT=Automatic Line TravelSIZE PNEUMATIC 4-WEEK HYDRAULIC 4-WEEKStandard 10”-12”-M $3,600/$3,700 $3,800/$3,80014”-16”-M $3,900/$4,600 $4,400/$4,90014”-16” ALT - $4,750/$5,30018”-20”M $4,800/$5,450 $5,000/$5,50018”-20” ALT - $5,550/$6,00020”-22” ALT - $5,550/$6,000Automatic Line Travel (24”-26” and above) 24”-26” - $7,000/$7,00028”-30” - $7,500/$7,50030”-32” - $7,500/$8,000
2013 RATES WWW.WORLDWIDEMACHINERY.COM
PIPELINE SPECIALTY
U.S. TOLL FREE 800.383.2666 I PHONE [email protected]
TRACK-TYPE TRACTORS MODEL ATTACH. HP SHIP WT. 4-WEEK WEEKLYD10R/T S&R 570 152,000 $26,000 $8,700D9R/T S&R 450 105,000 $20,700 $6,900D8R/T / D155 S or A&R 305 84,000 $16,250 $5,450D7R S or A&R 230 62,000 $13,000 $4,350D7R LGP S or A 230 65,000 $15,450 $5,150D6R XL S&R 175 45,000 $8,850 $2,950D6R LGP S or A&W 170 48,000 $11,450 $3,800D6M/N XL PAT&R 160 35,000 $6,550 $2,200D6M/N LGP PAT&W 145 40,000 $8,850 $2,950D5M/N LGP PAT&W 130 30,000 $6,550 $2,200D5M/N XL PAT 105 25,000 $4,850 $1,650D5C PAT&R 105 24,000 $3,900 $1,300D3G PAT&R 70 17,000 $3,050 $1,050* Winches available for D6, D7 and D8. EXCAVATORS (Standard config. R boom/medium stick) MODEL DEPTH HP SHIP WT. 4-WEEK WEEKLYPC750/385CL 35’10” 436 150,000 $25,000 $8,350PC600/365B/CL 26’10” 385 125,000 $20,550 $6,850PC400 /345B/CL 26’8” 250 98,000 $13,550 $4,550PC300/330C/DL 24’ 222 75,000 $8,950 $3,000PC220/325C/DL 23’2” 168 62,000 $7,800 $2,600PC200/320C/DL 20’5” 128 46,960 $5,650 $1,900PC150/315CL 21’6” 99 37,000 $5,000 $1,700PC120/312CL 19’10” 84 29,150 $4,450 $1,500
EXCAVATORS WITH ATTACHMENTS Hydraulic HammersMODEL HAMMER FT/lbs. 4-WEEK WEEKLY345B/CL G110 10,000 lb. $22,900 $7,650330CL G80 7,500 lb. $17,700 $5,900325CL G80 6,500 lb. $12,000 $4,000320CL E68 3,500 lb. $10,950 $3,650315CL E68 3,500 lb. $9,700 $3,250PC120/312CL E64 City 2,000 lb. $7,950 $2,650
Excavators with ThumbsMODEL SHIP WT. 4-WEEK WEEKLYPC400/345B/CL w/Thumb 100,000 $14,800 $4,950PC300/330C/DL w/Thumb 77,150 $10,300 $3,450PC220/325C/DL w/Thumb 63,500 $8,950 $3,000PC200/320C/DL w/Thumb 48,350 $6,500 $2,200PC150/315CL w/Thumb 37,000 $5,300 $1,800PC120/312CL w/Thumb 29,150 $4,700 $1,600Long Reach ExcavatorsMODEL REACH SHIP WT. 4-WEEK WEEKLY330CL 65’ 85,000 $14,000 $4,700PC200 55’ 51,000 $11,000 $3,700
Trench CompactorsMODEL FITS ON 4-WEEK WEEKLY320BL w/NPK C8 Plate Comp. $9,800 $3,300PC120/312L w/NPK C4 Plate Comp. $6,200 $2,10036” Compaction Wheel 330CL, 325CL $1,450 $50024” Compaction Wheel 320CL, 325CL $1,250 $45024” Compaction Bucket 320CL, 325CL $1,750 $600
WHEEL LOADERS MODEL BUCKET HP SHIP WT. 4-WEEK WEEKLY988G/H 9 yd. 530 115,000 P.O.R. P.O.R.980G/H / WA500 7 yd. 275 61,046 $12,300 $4,100966G/H 5 yd. 220 46,096 $9,600 $3,200950G/H 4 yd. 170 36,521 $7,200 $2,400938G / WA320 3 yd. 140 27,220 $5,700 $1,900928G 2.5 yd. 120 25,554 $4,050 $1,325
INTEGRATED TOOL CARRIERS MODEL BUCKET HP SHIP WT. 4-WEEK WEEKLYIT38G 3.25 yd. 145 30,000 $6,500 $2,200IT28G/930G 2.5 yd. 125 25,000 $4,350 $1,450
IT AttachmentsMODEL SHIP WT. 4-WEEK WEEKLYForks with Carriage 1,600 $142 $84Material Handling Arm 80 $142 $84
TRACK LOADERS MODEL BUCKET HP SHIP WT. 4-WEEK WEEKLY963C 2.5 yd. 150 45,000 $10,300 $3,450953C 2 yd. 120 34,000 $7,900 $2,650
ROUGH TERRAIN CRANES MODEL CAPACITY BOOM + JIB 4-WEEK WEEKLYGrove 9100 100 Ton 114’ + 58’ $18,650 $6,250Grove 880 80 Ton 114’ + 58’ $15,750 $5,250Grove 870B 70 Ton 125’ + 60’ $12,350 $4,200Grove 865B 65 Ton 125’ + 60’ $11,050 $3,700Grove 860B 60 Ton (Long Boom) 115’ + 60’ $10,500 $3,700Grove 760 60 Ton 110’ + 56’ $9,900 $3,300Grove 750 50 Ton 110’ + 32’ or 56’ $8,950 $2,950Grove 635C 35 Ton 104’ + 51’ $7,350 $2,500Grove 528C 28 Ton 70’ + 23’ $5,000 $1,650Grove 522B 22 Ton 78’ + 25’ $4,100 $1,400Grove 58D 20 Ton 60’ + 20’ $3,850 $1,500
WATER TANKERS MODEL CAPACITY HP SHIP WT. 4-WEEK WEEKLY631E 10,000 gal. 450 100,000 $14,250 $4,750621F 8,000 gal. 330 75,000 $11,350 $3,800615C 6,500 gal. 265 60,000 $9,900 $3,300613C 5,000 gal. 175 35,000 $8,550 $2,850D400/740 8,000 gal. 385 66,000 $13,000 $4,3504,000 Gallon Truck 4,000 gal. 250 14,000 $5,100 $1,7002,000 Gallon Truck 2,000 gal. 175 10,000 $2,700 $900
SUPERIOR WATER TOWERS MODEL CAPACITY 4-WEEK WEEKLYST-1500 15,000 gal. $1,900 $650ST-1200 12,000 gal. $1,550 $550ST-1000 10,000 gal. $1,350 $450MEGA MMR4 Fill Pump $2,600 $900
MOTOR GRADERS MODEL HP SHIP WT. 4-WEEK WEEKLY16H 275 60,150 $16,650 $5,55014H 215 45,610 $10,600 $3,550160H 200 34,500 $8,550 $2,850143H 185 31,090 $8,300 $2,750140H 185 31,090 $7,500 $2,500Laser Equipment P.O.R. P.O.R.
ARTICULATED TRUCKS MODEL CAPACITY HP SHIP WT. 4-WEEK WEEKLY740/A40D/HM400 40 Ton 385 66,000 $15,800 $5,300735/A35D 35 Ton 285 56,000 $13,000 $4,350730/HM300 30 Ton 285 48,000 $11,650 $3,900725 25 Ton 214 40,000 $10,600 $3,550
INGERSOLL-RAND DRILLS MODEL HOLE SIZE SHIP WT. 4-WEEK WEEKLYECM690 3”-5” 39,500 $15,500 N/AECM590 2.5”-4 .5” 24,500 $11,550 N/AECM490 2.5”-4” 23,500 $10,250 $3,550ECM370 2.5”-4” 18,000 $7,350 $2,550ECM350(requires 2.5”-4” 1,300 $3,900 $1,400750 air compressor)INGERSOLL-RAND AIR COMPRESSORS MODEL PSIG SHIP WT. 4-WEEK WEEKLYHP1300WCU 150 16,000 $5,350 $1,800XP1400WCU 125 16,000 $5,250 $1,800XP1200WCU 125 16,000 $4,350 $1,500XHP900WCAT 350 12,000 $5,950 $2,100
MANDRELS (continued) SIZE PNEUMATIC 4-WEEK HYDRAULIC 4-WEE34”-36” - $8,500/$8,50036”-38” - $9,500/$9,50040”-42” - $14,000/$14,50042”-44” - $16,000/$16,00046”-48” - $17,500/$17,50056” - P.O.R.52”-54” and 58”-60” - P.O.R.
ROLI - CRADLES MODEL SIZE 4-WEEK WEEKLYRC12 6”-12” $800 $270
RC24 12”-24” $1,000 $340RC36 24”-36” $2,550 $850RC48 36”-48” $3,000 $1,000RC60 48”-60” $3,500 $1,150
PUMPS MODEL 4-WEEK WEEKLYDitch Pump P.O.R. P.O.R.Fill Pump P.O.R. P.O.R.Pressure Pump P.O.R. P.O.R.
2013 RATES WWW.WORLDWIDEMACHINERY.COM
EARTHMOVING
U.S. TOLL FREE 800.383.2666 I PHONE [email protected]
XP825WCU 100 10,000 $2,950 $1,000HP825WCU 150 10,000 $3,150 $1,050XP750WCU 100 10,000 $2,650 $900HP750WCU 150 10,000 $3,000 $1,000P375WD 100 4,500 $1,550 N/AP250WCU 100 3,165 $1,200 N/AP185WJD 100 2,825 $850 N/A50’ of 2” Hose $150 $50
VIBRATORY BASE COMPACTORS MODEL WIDTH SHIP WT. 4-WEEK WEEKLYSheepsfootCP563E/SD122FB 84” 34,000 $5,700 $1,900CP433E/SD77FB 66” 20,000 $4,200 $1,400
Smooth DrumCS583E 84” 34,000 $6,750 $2,250CS563E/SD122DX 84” 27,000 $5,300 $1,750CS433E/SD77DX 66” 15,000 $4,050 $1,350
AG TRACTORS MODEL HP SHIP WT. 4-WEEK WEEKLYCH-75 340 33,480 $7,900 $2,650JD-9520 425 40,000 $9,950 $3,350CH-65 310 33,480 $7,350 $2,450CH-45 200 26,750 $5,250 $1,750 FUEL/LUBE TRUCKS MODEL 4-WEEK WEEKLY1,000 Gallon Fuel/ 6 Lube Products $5,200 $1,7502,000 GallonFuel/ 6 Lube Products $6,450 $2,150
FUEL TRUCKS MODEL 4-WEEK WEEKLY3,800 Gallon $5,750 $1,950
DUMP TRUCKS MODEL 4-WEEK WEEKLY14 yd. Tandem $4,950 $1,650
TERMS & CONDITIONS
Customer must provide proof of adequate insurance before picking up machines.
Rent begins when a machine leaves one of WMPD’s yards and continues until it is returned to one of WMPD’s yards.
Monthly rates are based on a 4 week billing cycle. Hours allowed per month are 200 hours usage. Weekly rates are based on 50 hours. Excess hours above these amounts will be billed on a pro-rata basis. Sales tax, when applicable, will be additional to the rental rate. Daily rates are 1/3 of weekly rates.
Rates are subject to change at any time without notice.
The Customer is responsible for:
• Groundengagingtoolreplacement(i.e.bucket,teeth&cuttingedge.) • Changingfiltersandfluidsatregularintervals. • Returningmachinesincleancondition. • Physicaldamagetomachines. • Tiredamageorunusualwearonallmachines. • Tirewearwillbechargedon623andlargerscrapers,alloff-roadtrucks, 980 and larger wheel loaders. • Maintainingandlubricatingthemachine(s)permanufacturersspecifications.
CONTACT US
U.S. TOLL FREE 800.383.2666 I PHONE [email protected]
2013 RATES WWW.WORLDWIDEMACHINERY.COM
Main Office: Houston, TX 16031 East Freeway Channelview, TX 77530 Phone 281.457.4400 Fax 281.452.5455 U.S. Toll Free 800.383.2666 Intl. Toll Free 800.9675.3948 [email protected]
Europe Phone [email protected]
Russia, China and the Middle East Phone +39.349.198.1281 ItalyPhone +7.495.507.4827 [email protected]
India Phone [email protected]
AfricaIntl. Toll Free [email protected]
North America Phone [email protected]
Latin America Phone [email protected]
Brazil Phone [email protected]
AustraliaPhone [email protected]
