VESTAMID® HTplus - PA 6T/X and PA 10T/X product range …...Main properties of glass fiber...

Evonik Resource Efficiency GmbH | VESTAMID® | Januar 2016 /24

The following pages provide an overview of the main product information and properties of VESTAMID® HTplus - PA 6T/X and PA 10T/X. In case, there are additional information missing please contact our technical support. Therefore please note our contact list on the last page.

Technical Information

VESTAMID® HTplus - PA 6T/X and PA 10T/X product range and main properties

Evonik Resource Efficiency GmbH | VESTAMID® | /24

Abbreviations:

CO = Compounding

PO = Powder

VESTAMID® HTplus base and unfilled polymers

VESTAMID® HTplus

Description acc. ISO 1874-1

Characterization Processing Tensile modulus [MPa]

Applications

M1000 natural color

PA6T/X Medium viscosity, semicrystalline with aromatic segments

CO 3600 Manufacturing of compounds for injection molding

M3000 natural color

PA10T/X Medium viscosity, semicrystalline with aromatic segments; partly based on renewable raw materials


C2505 natural color

PA10T/X Low viscosity, stabilized PO 2100 Fiber composites

M5000 natural color

PA6I/6T Medium viscosity, amorphous with aromatic segments;


M8000 natural color

PA10T/X Medium viscosity, semicrystalline with aromatic segments; partly based on renewable raw materials


Evonik Resource Efficiency GmbH | VESTODUR® | /24

1) C = Complete break, incl. hinge break H

N = No break 2) Powder, based on C2000

Main properties of VESTAMID® HTplus base and unfilled polymers

Properties Test method Unit VESTAMID® HTplus

M1000 M3000 C25052) M5000 M8000

Physical, thermal, mechanical properties, and flammability

Density 23 °C ISO 1183 g/cm³ 1.2 1.1 1.11 1.18 1.146

Melting temperature DSC 2nd heating

ISO 11357 °C 300 - 315

approx. 285

approx. 265

Softening t approx. 130

approx. 297

Temp. of deflection under load Method A 1.8 MPa Method B 0.45 MPa

ISO 75

°C °C

120 205

128 230

124 130

> 105 > 115

130 260

Vicat softening temperature Method A 10 N Method B 10 N

ISO 306 °C °C

300

280

295 274

Flammability acc. UL94 1.6 mm 3.2 mm

IEC 60695

HB HB

HB HB

Water absorption 23 °C, saturation 23°C, 50% rel. humidity

ISO 62 % %

8.0 0.3

3.0 0.15

3.0 0.15

Mold shrinkage in flow direction in transverse direction

ISO 294-4 % %

1.3 1.5

1.4 1.5

Tensile test Stress at break Strain at break

ISO 527-1/ -2 MPa %

75 2

73 5

62 >100

70 >100

60 3

Tensile modulus ISO 527-1/ -2 MPa 3600 2700 2100 2700 2700

CHARPY impact strength 23 °C -40 °C

ISO 179/1eU kJ/m² kJ/m²

45 C1) 40 C1)

60 C1) 60 C1)

N1) >100

N1) 300 C1)

50 C1) 50 C1)

CHARPY notched impact strength 23 °C -40 °C

ISO 179/1eA kJ/m² kJ/m²

4,5 C1) 4 C1)

6,4 C1) 5,5 C1)

18 C1) 15 C1)

9.5 C1) 8 C1)

5,5 C1) 5,5 C1)

Electrical properties Electric strength IEC 60243-1 kV/mm 30

Volume resistivity IEC 60093 Ω cm 550


Abbreviations:

IM = Injection molding

Glass fiber reinforced VESTAMID® HTplus PA6T/X grades

VESTAMID® HTplus



Applications

M10315 PA6T/X, GF15 15% glass fibers, medium viscosity, stabilized; colors: natural, black

IM 7100 Dimension-stable, highly rigid technical parts for the use at high service temperatures in automotives, electronics and machinery


IM 11000 Dimension-stable, highly rigid technical parts for the use at high service temperatures in automotives, electronics and machinery

M10345 PA6T/X, GF45 45 % glass fibers, medium viscosity, stabilized; colors: natural, black

IM 15500 Dimension-stable, highly rigid technical parts for the use at high service temperatures in automotives, electronics and machinery, metal replacement







Main properties of glass fiber reinforced VESTAMID® HTplus PA6T/X grades


M10315 M1033 M10345 M1035 M1036


Density 23 °C ISO 1183 g/cm³ 1.31 1.43 1.58 1.64 1.77


ISO 11357 °C 300 - 315 300 - 315 300 - 315 300 - 315 300 - 315


ISO 75

°C °C

280 303

290 305

292 305

293 305

293 305

Vicat softening temperature Method 10 N

ISO 306 °C

305

308

308

308

308

Linear thermal expansion 23-55°C

ISO 11359 10-4 K-1 0.27


IEC 60695 HB HB

HB HB

HB HB

HB HB

HB HB

HB HB


ISO 62 % %

7.2 0.3

5.6 0.2

4.4 0.2

4.0 0.2

3.2 0.2


ISO 294-4 % %

0.6 0.9

0.2 0.9

0.1 0.7

<0.1 0.5

0.6 0.9


ISO 527-1/ -2 MPa %

110 2.0

160 1.7

210 1.7

230 1.6

260 1.5




19 C1) 18 C1)

35 C1) 27 C1)

54 C1) 37 C1)

60 C1) 40 C1)

60 C1) 40 C1)



4 C1) 4 C1)

7 C1) 7 C1)

10 C1) 10 C1)

11 C1) 11 C1)

17 C1) 17 C1)

Electrical properties Electric strength IEC 60243-1 kV/mm 29 28

Volume resistivity IEC 60093 Ω cm 7 x 1015 9 x 1015


Abbreviations:


Glass fiber reinforced VESTAMID® HTplus PA10T/X grades

VESTAMID® HTplus



Applications

M30315 PA10T/X, GF15

15% glass fibers, medium viscosity, stabilized; wide processing window; “green”, colors: natural, black

IM 5600 Dimension-stable, highly rigid technical parts for the use at high service temperatures and in contact with chemicals in automotives, electronics and machinery

M3033 PA10T/X, GF30


IM 9400 Dimension-stable, highly rigid technical parts for the use at high service temperatures and in contact with chemicals in automotives, electronics and machinery

M3035 PA10T/X, GF50


IM 15000 Dimension-stable, highly rigid technical parts for the use at high service temperatures and in contact with chemicals in automotives, electronics and machinery, metal replacement

M3036 PA10T/X, GF60


IM 19000 Dimension-stable, highly rigid technical parts for the use at high service temperatures and in contact with chemicals in automotives, electronics and machinery, metal replacement



Main properties of glass fiber reinforced VESTAMID® HTplus compounds


M30315 M3033 M3035 M3036


Density ISO 1183 g/cm³ 1.24 1.36 1.58 1.70


ISO 11357 °C

approx. 285

approx. 285

approx. 285

approx. 285


ISO 75

°C °C

248 279

>265 >285

270 284

270 282


ISO 306 °C

284

289

285

282

Linear thermal expansion 23-55°C

ISO 11359 10-4 K-1 0.8


IEC 60695 HB HB

HB HB

HB HB

HB HB


ISO 62 % %

2.1 0.11

1.5 0.08

1.2 0.06


ISO 294-4. processing acc. ISO 1874-2

% %

0.3 0.8

0.1 0.7


ISO 527-1/ -2 MPa %

95 2.0

130 1.6

185 1.9

190 1.7

Tensile modulus ISO 527-1/ -2 MPa 5600 9400 15000 19000



21 C1) 19 C1)

40 C1) 30 C1)

58 C1) 50 C1)

60 C1) 50 C1)



4 C1) 3,5 C1)

8,5 C1) 8 C1)

11 C1) 12 C1)

13,5 C1) 15,5 C1)

Electrical properties Electric strength IEC 60243-1 kV/mm

Volume resistivity IEC 60093 Ω cm 1014 1013


Abbreviations:


Reinforced VESTAMID® HTplus grades for drinking water applications

VESTAMID® HTplus



Applications

M1633 PA6T/X, GF30 30% glass fibers, medium viscosity, stabilized, approvals for contact with drinking water; colors: natural, black


M1634 PA6T/X, GF40 40% glass fibers, medium viscosity, stabilized, approvals for contact with drinking water; colors: natural, black


M1635 PA6T/X, GF50 50 % glass fibers, medium viscosity, stabilized, approvals for contact with drinking water; colors: natural, black


M1636 PA6T/X, GF60 60 % glass fibers, medium viscosity, stabilized, approvals for contact with drinking water; colors: natural, black




Main properties of reinforced VESTAMID® HTplus grades for drinking water applications


M1633 M1634 M1635 M1636

Glass fiber content % 30 40 50 60


Density ISO 1183 g/cm³ 1.43 1.54 1.64 1.77


ISO 62 % %

5.6 0.2

4.8 0.2

4.0 0.2

3.2 0.2

Tensile strength 23°C ISO 527 MPa 160 195 230 260

Strain at break ISO 527 % 1.7 1.7 1.6 1.6

Tensile modulus ISO 527-1/ -2 MPa 10000 14000 17000 22000



35 C1) 27 C1)

47 C1) 34 C1)

60 C1) 40 C1)

60 C1) 40 C1)



7 C1) 7 C1)

9 C1) 9 C1)

11 C1) 11 C1)

18 C1) 13 C1)

Temp. of deflection under load Method A 1.8 MPa Method B 0.45 Mpa

ISO 75 °C °C

290 305

290 305

293 305

293 305


ISO 306 °C

308

308

308

308

Flammability UL94 HB HB HB HB


1) for water / glycol contact

Abbreviations:


Reinforced VESTAMID® HTplus grades for water / glycol applications

VESTAMID® HTplus



Applications

HY10333 PA6T/X, GF33 33% glass fibers, medium viscosity, stabilized1); colors: black

IM 11000 Dimension-stable, highly rigid technical parts for the use at high service temperatures in automotives, machinery, and in contact with water / glycol







HY3034 PA10T/X, GF40

40 % glass fibers, medium viscosity, stabilized1), wide processing window, colors: black




Main properties of glass fiber reinforced VESTAMID® HTplus PA6T/X grades


HY10333 HY1034 HY10345 HY1035 HY3034


Density 23 °C ISO 1183 g/cm³ 1.44 1.50 1.56 1.62 1.46

Melting range DSC 2nd heating

ISO 11357 °C 295-315 295-315 300-315 300-315 approx. 286


ISO 75

°C °C

286 305

290 309

292 307

293 309

270 285


ISO 306 °C

308 277

308 277


ISO 527-1/ -2 MPa %

170 2.1

190 2.2

205 2

220 2

175 2.2




55 C1) 40 C1)

65 C1) 50 C1)

65 C1) 60 C1)

81 C1) 77 C1)

70 C1) 55 C1)



8 C1) 7 C1)

9 C1) 8 C1)

9 C1) 9 C1)

13 C1) 11 C1)

10 C1) 8 C1)


Abbreviations:


Flame retardant VESTAMID® HTplus grades

VESTAMID® HTplus



Applications

M1900 PA6T/X unreinforced, medium viscosity, flame retardant (UL94 V-0 from 0,4 mm), halogen free, free of red phosphorus, RoHS and WEEE conform colors: natural, black

IM 4000 Parts for the electric and elec-tronics industry demanding UL94 V-0, suitable for industrial soldering. UL94 listed in file E100211. Parts fulfill RoHS 2002/95/EC, Restriction of Hazardous Substances. WEEE: Parts are not related to "selective recovery" according to Directive 2002/96/EC on waste electrical and electronic equipment.

M1933 PA6T/X, GF 30 30% glass fibers, medium viscosity, flame retardant (UL94 V-0 from 0,4 mm), halogen free, free of red phosphorus, RoHS and WEEE conform colors: natural, black

IM 10000 Parts for the electric and electronics industry demanding UL94 V-0, suitable for industrial soldering. UL94 listed in file E100211. Parts fulfill RoHS 2002/95/EC, Restriction of Hazardous Substances. WEEE: Parts are not related to "selective recovery" according to Directive 2002/96/EC on waste electrical and electronic equipment.



Main properties of flame retardant VESTAMID® HTplus grades


M1900 M1933


Density 23 °C ISO 1183 g/cm³ 1.22 1.46


ISO 11357 °C

300-315

300-315


ISO 75

°C °C

135 235

275 300


ISO 306 °C

295 235

303


IEC 60695 V-0 V-0

V-0 V-0


ISO 62 % %

5.8 0.2

3.9 0.2


ISO 294-4 % %

1.3 1.6

0.2 0.9


ISO 527-1/ -2 MPa %

70 2.0

150 1.8

Tensile modulus ISO 527-1/ -2 MPa 4000 10000



34 C 27 C

35 C1) 30 C1)



3 C 3 C

6 C1) 6 C1)

Electrical properties

Electric strength K20 / K20 IEC 60243-1 kV/mm 32 32

Comparative tracking index CTI IEC 60112 550 600

Volume resistivity IEC 60093 Ω cm 1016 1016


Abbreviations:


Rubber bondable reinforced VESTAMID® HTplus grades

VESTAMID® HTplus



Applications

R1033 PA6T/X, GF30 30% glass fibers, medium viscosity, stabilized, adhesive modified for plastic-rubber composites, high heat resistance colors: black

IM 11000 Plastic-rubber composites (K&K): Bonding to rubber without adhesive, e.g., to ACM, FPM, H-NBR; dimension-stable, highly rigid parts for use at high service temperatures

R1133 PA6T/X, GF30 30% glass fibers, medium viscosity, stabilized, adhesive modified for plastic-rubber composites especially with EPDM, high heat resistance colors: black

IM 10500 Plastic-rubber composites (K&K): Bonding to rubber without adhesive, especially to EPDM, AEM; dimension-stable, highly rigid parts for use at high service temperatures

R1035 PA6T/X, GF50 50 % glass fibers, medium viscosity, stabilized, adhesive modified for plastic-rubber composites, high heat resistance colors: black

IM 17000 Plastic-rubber composites (K&K): Bonding to rubber without adhesive, e.g., to ACM, FPM, H-NBR; dimension-stable, highly rigid parts for use at high service temperatures



Main properties of rubber bondable reinforced VESTAMID® HTplus grades


R1033 R1133 R1035


Density 23 °C ISO 1183 g/cm³ 1.43 1.40 1.64


ISO 11357 °C

300-315

300-315

300-315


ISO 75

°C °C

290 305

270 295

290 305


ISO 306 °C

305

300

305


IEC 60695 HB HB

HB HB

HB HB


ISO 62 % %

5.6 0.2

5.0 0.2

4.0 0.2


ISO 294-4 % %

0.2 0.9

0.2 0.9

0.1 0.7


ISO 527-1/ -2 MPa %

180 2

140 1.5

240 2

Tensile modulus ISO 527-1/ -2 MPa 11000 10500 17000



45 C1) 30 C1)

29 C1) 23 C1)

70 C1) 50 C1)



7 C1) 7 C1)

6 C1) 6 C1)

11 C1) 11 C1)


Abbreviations:


Tribological modified VESTAMID® HTplus grades

VESTAMID® HTplus



Applications

M1533 PA6T/X, GF30 30% glass fibers, medium viscosity, stabilized, lubricated, low wear, colors: natural, black

IM 10500 Tribological loaded parts at high service temperatures, e.g. sliding bearings, pivot bushings, bearing cups, slide rails, sliding parts



Main properties of tribological modified VESTAMID® HTplus grades


M1533

Density 23 °C ISO 1183 g/cm³ 1.54


ISO 11357 °C

300-315

Temp. of deflection under load Method A 1.8 MPa

ISO 75

°C

290


IEC 60695 HB HB


ISO 62 % %


ISO 294-4 % %

0,0 0,6


ISO 527-1/ -2 MPa %

160 1.7

Tensile modulus ISO 527-1/ -2 MPa 10500

CHARPY impact strength 23 °C ISO 179/1eU kJ/m² 35 C1)

CHARPY notched impact strength 23 °C ISO 179/1eA kJ/m² 10 C1)


Abbreviations:


Mineral reinforced VESTAMID® HTplus grades

VESTAMID® HTplus



Applications

M10525 PA6T/X, MD25 25% mineral, medium viscosity, stabilized, anisotropic, colors: black

IM 8600 Dimension-stable, anisotropic technical parts for the use at high service temperatures in automotives, electronics and machinery, glossy surface

M1054 PA6T/X, MD40 40% mineral, medium viscosity, stabilized, anisotropic, colors: black

IM 12800 Dimension-stable, anisotropic technical parts for the use at high service temperatures in automotives, electronics and machinery, glossy surface

M10465 PA6T/X, GMD65

65% mineral and glass fiber, medium viscosity, stabilized, anisotropic, colors: black

IM 20800 Dimension-stable, highly rigid and anisotropic technical parts for the use at high service temperatures in automotives, electronics and machiner



Main properties of mineral reinforced VESTAMID® HTplus grades


M10525 M1054 M10465


Density 23 °C ISO 1183 g/cm³ 1.41 1.57 1.89


ISO 11357 °C

300-315

300-315

300-315


ISO 75

°C °C

220 287

240 290

290 307


ISO 527-1/ -2 MPa %

133 2.4

148 1.9

190 1.2

Tensile modulus ISO 527-1/ -2 MPa 8600 12800 20800



34 C1) 30 C1)

52 C1) 37 C1)

40 C1) 35 C1)



3.6 C1) 2.6 C1)

3.7 C1) 3.1 C1)

5.5 C1) 5.0 C1)


Abbreviations:


Carbon fiber reinforced VESTAMID® HTplus grades

VESTAMID® HTplus



Applications

M1063 PA6T/X, CF30 30% carbon fibers, medium viscosity, stabilized, antistatic, low wear, conductive; colors: black

IM 24000 Dimension-stable, exhibiting high stiffness, highly rigid technical parts for the use at high service temperatures in automotives, electronics and machinery



Main properties of carbon fiber reinforced VESTAMID® HTplus grades


M1063

Density 23 °C ISO 1183 g/cm³ 1.32


ISO 11357 °C

300-315


ISO 75

°C °C

305 282


ISO 306 °C


IEC 60695


ISO 62 % %


ISO 294-4 % %

0,08 0,43


ISO 527-1/ -2 MPa %

240 1.2

Tensile modulus ISO 527-1/ -2 MPa 24000



45 C1) 40 C1)



7 C1)

6.5 C1)


Surface resistance ROA IEC60093 Ohm 1000


Abbreviations:


VESTAMID® HTplus grades for Laser Direct Structuring (LDS)

VESTAMID® HTplus



Applications

LDS1031 PA6T/X, GF10 10% glass fibers, mineral reinforced, medium viscosity, stabilized, qualified for LPKF LDS process, optimized shrinkage, suitable for lead-free solders

IM 11500 Three-dimensional interconnect devices in electronical applications, specially adapted for the LDS process. Dimension-stable, glossy surface

LDS3031 PA10T/X, GF10

10% glass fibers, mineral reinforced, medium viscosity, stabilized, qualified for LPKF LDS process, optimized shrinkage, suitable for lead-free solders. Partly biobased and eco-friendly

IM 9500 Three-dimensional interconnect devices in electronical applications, specially adapted for the LDS process. Dimension-stable, glossy surface



Main properties of VESTAMID® HTplus grades for Laser Direct Structuring


LDS1031 LDS3031


Density 23 °C ISO 1183 g/cm³ 1.62 1.53


ISO 11357 °C

300 - 315

approx.. 285


ISO 75

°C °C

272 286

259 285


ISO 306 °C

302 260

279 243


IEC 60695 no classification

no classification


ISO 62 % %


ISO 294-4 % %

0.35 0.53

0.27 0.54


ISO 527-1/ -2 MPa %

80 0.8

84 1.1

Tensile modulus ISO 527-1/ -2 MPa 11500 9500



13 C1) 10 C1)

15 C1) 12 C1)



1.8 C1) 1.8 C1)

2.3 C1) 2.2 C1)


Electric strength K20 / P50 IEC 60243-1 kV/mm

Comparative tracking index CTI IEC 60112 600 - <1 600 - <1

Volume resistivity pD IEC 60093 Ω cm 1.41 E+16 7.79 E+15

Integrated expertise: direct contacts in every region

Contact Country Phone Mobile E-mail

Karsten Goldstein Scandinavia +49 2362 999797 +49 171 813 0033 [email protected]

Frank Lindner Germany +49 2365 6990758 +49 171 813 0045 [email protected]

Prafulla Toke Austria, Switzerland

+49 172 4095686 [email protected]

Andrzej Wolak Czech. Republic, Poland, Slovakia

+48 22 318 1007 +48 60 320 2152 [email protected]

Géraud Apchin France +33 1 39 75 79 85 +33 607 24 4714 [email protected]

Luca Castelli Roberto Sacchi

Italy, Spain +39 010 8601925+39 0371 21 9363

+39 393 1924645+39 335 684 0731

[email protected] [email protected]

Julia Trufanova Russia +7 495 721 2862 (ext. 566)

[email protected]

Cigdem Kir Turkey +90 2163 959 961 +90 530 280 93 52 [email protected]

Karel Ogenia UK, Eire, Nordic +31 492 772210 +31 6 51245557 [email protected]

Peter Colburn USA, Canada +1 203 284 4291 [email protected]

Miguel A. Delgado Mexico +52 55 5483 1023 +52 55 2980 8891 [email protected]

Haroldo Rodrigues South America +55 11 3146 4150 +55 11 8700 0532 [email protected]

Sandra Kao Taiwan +88 622175 5259 +88 6955 63 2323 [email protected]

Stanford Tang China +86 21 6119 1402 +86 138 18547434 [email protected]

Hitesh Shah India +91 22 6723 8851 +91 98197 13881 [email protected]

Mitsunori Naganuma Japan +81 3 5324 6332 +81 90 6122 9653 [email protected]

David Baek Joonsang Park

Korea +82 2 320 4750 +82 325102431

+82 1098830181

[email protected] [email protected]

Andrew Windsor Australia +61 3 9703-8889 +61 41 9517 180 [email protected]

VESTAMID® is a registered trademark of the Evonik Degussa GmbH This information and any recommendations, technical or otherwise, are presented in good faith and believed to be correct as of the date prepared. Recipients of this information and recommendations must make their own determination as to its suitability for their purposes. In no event shall Evonik assume liability for damages or losses of any kind or nature that result from the use of or reliance upon this information and recommendations. EVONIK EXPRESSLY DISCLAIMS ANY REPRESENTATIONS AND WARRANTIES OF ANY KIND, WHETHER EXPRESS OR IMPLIED, AS TO THE ACCURACY, COMPLETENESS, NON-INFRINGEMENT, MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE (EVEN IF EVONIK IS AWARE OF SUCH PURPOSE) WITH RESPECT TO ANY INFORMATION AND RECOMMENDATIONS PROVIDED. Reference to any trade names used by other companies is neither a recommendation nor an endorsement of the corresponding product, and does not imply that similar products could not be used. Evonik reserves the right to make any changes to the information and/or recommendations at any time, without prior or subsequent notice. Evonik Resource Efficiency GmbH High Performance Polymers, 45764 Marl Phone +49 2365 49-9878, E-mail [email protected] www.vestamid.com

VESTAMID® HTplus - PA 6T/X and PA 10T/X product range …...Main properties of glass fiber...

Documents

Transcript of VESTAMID® HTplus - PA 6T/X and PA 10T/X product range …...Main properties of glass fiber...