VERY IMPORTANT INFORMATION REGARDING ATTAHED SYSTEM … · VERY IMPORTANT INFORMATION REGARDING...
Transcript of VERY IMPORTANT INFORMATION REGARDING ATTAHED SYSTEM … · VERY IMPORTANT INFORMATION REGARDING...
Mark Fuqua 410-215-7356 [email protected] www.MDcommercial.com
MarylandCommercial Design Inspired, Value Based Commercial Furnishing
VERY IMPORTANT INFORMATION REGARDING
ATTACHED SYSTEM 2 RESOURCE.
Friant resources contain LIST PRICES. Maryland Commercial sells for a
small fraction of list price. However...
• We are not allowed to share our net pricing on a public forum (like our
website or direct mail). The MAP pricing (Minimum Advertised Price)
for Friant is 50% of list...we sell for much less (we discount way more
than 50%).
• There are three easy ways to get the net pricing for System 2:
1. Send me an email and ask for SYSTEM 2 NET PRICING. My email
address is [email protected]
2. Call me and ask for SYSTEM 2 NET PRICING @ 410-215-7356.
3. Sign up for an account on our website:
www.mdcommercial.com/Public-Facing/furniture/resource-
registration Registering is super easy. This will give you access to
resources for all 12 lines...Plus our Net Pricing Guide, which has
net pricing for all 12 Friant product lines.
INTRODUCTION
Terms and Conditions 2
Standard Fabrics 4
Standard Finishes 5
Matching WS & HS Panels 6
Fixed and Mobile Pedestals 7
Lateral Files 8
Pull Options, Systems Storage 9
Grommet Locations 10
TABLE OF CONTENTS
SYSTEM 2
PANELS
Hard-Surface Panel
Non-Electrical 11
Electrical 13
Hard-Surface Glazed Panel
Non-Electrical 16
Electrical 17
Fabric-Covered Panel
Electrical 20
Acoustical Panel
Non-Electrical 22
Electrical 24
Partial-Glazed Panel
Non-Electrical 26
Electrical 27
Door Panel 28
PANEL HARDWARE
Draw Rod 29
Connectors 30
ELECTRICAL DISTRIBUTION
Electrical Distribution 33
SYSTEM WORKSURFACES
Rectangular Worksurface 36
90° Notched and Curved Corner 38
Square Edge Half Circle 39
Square Edge D-Shaped 40
90° Extended Notched Corner 41
90° Extended Curved Corner 44
90° Extended Notched Corner Peninsula 47
Extended Curved Corner Peninsula 51
Ext Curved Corner P-Shape Peninsula 55
Elipse End Peninsula 57
Rectangular Asymmetrical 58
120° Rectangular 59
120° Corner / 90° Ends 60
120° Corner / 120° Ends 61
135° Corner 62
135° Double Corner 63
TRANSACTION WORKSURFACES
Transaction Surface 64
Corner Transaction 65
Flat Bracket 66
MY-HITE WORKSURFACES
Rectangular 67
Corner 68
90° Extended Curved Corner 69
Wedge 72
120° Corner / 90° Ends 73
120° Corner / 120° Ends 73
D-Shaped 74
WORKSURFACE SUPPORT
Supports 75
Components / Storage 77
Frameless Glass 80
Tackboards 81
Markerboards 82
Modesty Panel, Laminate 83
STORAGE
Privacy Screen, Fabric 84
Privacy Screen, Marker Board 85
Privacy Screen, Laminate 86
Pedestals 87
Lateral Files 89
PULLS
Pulls
Lateral 91
Pedestal 92
ACCESSORIES
Accessories 93
Keyed-Alike Information 94
SYSTEM 1
SYSTEM 1 PANELS
Hard-Surface Panel 97
Fabric Covered Panel 99
Acoustical Panel 101
Glazed Panel 103
PANEL HARDWARE
Panel Hardware 104
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 1 & 2
2
INTR
OD
UC
TIO
N
PRICES
All Prices are F.O.B. point. We reserve the right to change prices without prior notice.
ORDERING
Purchase Orders should be sent to Friant & Associates, LLC at [email protected], or faxed to (510) 535-6895. If your
specifications were created with CAP, GIZA, or Project Matrix please send the worksheet (SP4) with your Purchase Order.
TERMS
Net 30 days from date of invoice. Invoices are delinquent if not paid 30 days from date of invoice. In the event timely payment
is not made, interest will be charged at the rate of 1.5% per month on delinquent accounts. Buyers will also be liable for normal
collection costs and attorney’s fee. 50% deposit is required with every order, unless prior arrangements have been made.
ORDERS
Orders are only accepted by issuance of our formal acknowledgment, and are subject to the terms set forth herein and on our
order acknowledgment. It is the responsibility of the buyer to review our acknowledgment for its accuracy, and to notify Friant
within 48 hours from the date of the acknowledgment of any discrepancies.
LEAD TIMES
Lead times are subject to availability.
SHIPPING
Friant generally palletizes, boxes and/or shrink-wraps its products. If buyer requests additional packaging or special shipping, then
it is responsible for any extra costs that result. Buyer obtains title to products and assumes the risk of loss for them upon shipment
from Friant’s plant.
CLAIMS
We are not responsible for damage suffered in transit. Merchandise should be inspected for possible freight damage upon delivery.
The consignee should file for damage or shortages with the carrier within 5 days of delivery. You are also protected for “concealed
damage” if you file claim with the carrier within 5 days of delivery. Buyer must make all claims against Friant for defects, errors or
shortages in writing within 10 days after delivery. Failure to make such a claim shall constitute full acceptance.
RETURNS
No merchandise may be returned without our written consent and shipping instructions. Unauthorized returns will not be
accepted and will be returned freight collect.
PARTIAL SHIPMENTS
We will make every attempt to ship orders complete and on schedule. However, we reserve the right to make partial shipments, as
merchandise is ready. Invoices covering these shipments are to be paid as they become due.
ORDER CHANGE — CANCELLATIONS
Our order confirmation is final and binding. Any order change or cancellation is subject to our ability to conform. Such requests
are to be made in writing to our office.
SHIPMENT AND PREPAID FREIGHT
Unless otherwise instructed, we reserve the option to ship by what is, in our opinion, the best possible way. Upon request, we will
prepay and add freight for accounts with established credit.
DELIVERY
We are not liable for delay or failure of delivery due to strikes and/or differences with workmen, war, riot, fire, compliance with
government regulations, acts of nature, failure or delays of sources of supply, or any other causes beyond our control.
STORAGE
If buyer cannot accept delivery when merchandise is ready, we reserve the right to transfer goods to storage. Costs of transfer and
storage will be charged to the buyer’s account, and we will deem such transfer as constituting shipment for all purposes, including
invoicing, as of the date the transfer is made.
Terms and Conditions
Friant & Associates | www.friant.com
SYSTEM 1 & 2
3
INTR
OD
UC
TIO
N
CONSTRUCTION — SPECIFICATIONS
All items are produced to price list specifications unless otherwise advised. All dimensions shown are approximate. Manufacturer
reserves the right to make modifications and/or improvements without prior notice.
FABRIC APPLICATION
Standard fabric application for panels 67” and below is horizontal application. Panels taller than 67” are only available in vertical
application. When ordering panels 67” and below to match a panel taller than 67”, specify vertical application.
Friant & Associates is not responsible for charges associated with replacement of products due to incorrect specifications.
CUSTOMER’S OWN MATERIAL
Yardage requirement is based on 66” wide plain covering material, and must be increased if less than 66” wide. Special
instructions for handling material (pattern, directional fabric, right side of reversible fabric, etc.) must be submitted in writing
before fabric is delivered. In the absence of special instructions, we reserve the right to use our own judgment. We reserve the
right to reject any covering, which in our opinion, is unsuitable for our upholstery purposes. However, in no instance shall we be
held responsible for unsatisfactory results due to use of covering unsuitable for our upholstery methods.
We will not be responsible for errors caused by buyers not supplying us with sample cuttings attached to their order giving full
identification of covering material, (name of supplier, covering name, number and color) for identification purposes and advising
us of model number and quantity to which each cover is to be applied.
Customer’s own material that is shipped freight collect will be refused. A service charge will be applied for the return of unusable
C.O.M. Contact factory.
RIGHTS AND WARRANTIES — LIMITED LIFETIME WARRANTY
This warranty is given to the initial purchaser and is valid from the date of purchase, for as long as the initial purchaser owns
the product. This warranty covers defects in material and craftsmanship found during normal usage of the product during
the warranty period. If the product is defective, and if written notice of the defect is given to Friant & Associates within the
applicable warranty period, Friant & Associates, at its option, will either repair or replace the defective product with a comparable
component or product. This warranty applies to all products except as noted below.
High wear parts, such as wood veneer, fabrics, and other covering material/finishes, foam. glides, etc. are warranted for one (1)
year. This warranty does not apply to damage caused by a carrier, alteration to the product not expressly authorized by Friant
& Associates, nor to product considered to be of a consumable nature such as bulbs, light ballasts, etc. It also does not apply to
“Customer’s Own Material” (i.e. material specified by the customer that is not a standard Friant & Associates offering) used in the
manufacture of Friant & Associates products.
Friant & Associates does not warrant the matching of colors, grain or texture, except to within commercially acceptable standards.
A product will not be considered defective, and Friant & Associates will not be obligated to replace it, if it is not installed in a
proper manner (i.e. product not leveled, not secured properly, etc.).
Except as noted above, Friant & Associates makes no express or implied warranties to any product, and in particular makes
no warranty of fitness for any particular use. At Friant & Associates’ option, product repair and replacement is the customer’s
exclusive remedy for any and all product defects.
Friant & Associates shall not be liable for consequential, economic, or incidental damages arising from any product defect.
CALIFORNIA PROP 65 WARNING
Products in this catalog may contain a chemical known to the state of California to cause cancer, or birth defects or other
reproductive harm.
Terms and Conditions continued
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 1 & 2
4
INTR
OD
UC
TIO
N
PASSAGE TERRAIN SLIDE
PF601-1 Gull PF701-1 Cloud PF101-1 Caramel
PF601-2 Grove PF701-2 Dusk PF101-2 Slate
PF601-3 Wing PF701-3 Wave PF101-3 Pewter
PF601-4 Quartz PF701-4 Earth PF101-4 Verde
PF601-5 Leaf PF101-5 Twilight
PF601-6 Brook PF101-6 Vintage
PF601-7 Trail PF101-7 Java
PF601-8 Amber PF101-8 Latte
PF101-9 Sterling
PF101-10 Crema
PF101-11 Breeze
PF101-12 Stem
SKY SILKY STICKS
PF301-1 Terra PF401-1 Natural PF501-1 Smoke
PF301-2 Birch PF401-2 Parids PF501-2 Almond
PF301-3 Moss PF401-3 Overcast PF501-3 Sage
PF401-4 Field PF501-4 Straw
PF401-5 Graphite
NOTE: Fabric direction as per
Friant’s fabric card only.
Passage and Terrain are not
available on acoustical panels or
pedestal cushions.
All textiles listed are 66” wide.
Standard fabric application for
panels 67” and below is horizontal
application. 85”H panels are only
available in vertical application.
When ordering panels 67” and
below to match an 85”H panel,
specify vertical application.
Colors may vary slightly between
dye lots.
Order fabric cards online at
www.friant.com/samples.
Additional fabric cards can be
ordered directly from Burch Fabrics
and Guilford of Maine.
Please consult your Friant sales
consultant for:
— Panels taller than 66” high
— Other colors not listed above
NOTE: System 2 is MAS Green Certified.
For more information on LEED or
environmental information about our
products, contact the factory at spec@
friant.com or visit our website at www.
friant.com/environment.
NOTE: C.O.M fabric is available. Please see details at:
http://friant.com/products/index-7/fabrics/#com
PAINT TRIM
DT Dark Tone
MT Medium Tone
LG Light Gray
END PANEL - MEL
DT Dark Tone
MT Medium Tone
LG Light Gray
Note: See page 75 for end panel options.
PANEL GLAZING
TR Clear
FR Frosted (Contact
Customer Service for
leadtime)
Standard Fabrics
Trim/End Panel/Panel Glazing
C.O.M. Fabrics
Friant & Associates | www.friant.com
SYSTEM 1 & 2
5
INTR
OD
UC
TIO
N
Standard Finishes
When pairing a worksurface finish with a hardsurface panel finish (See page 6), use the matrix below to see the complimentary finishes. Please note, M1-M13 have corresponding finishes, while M14-M29 are paired with exact matching finishes. For matching edge PVC, please read across matrix.
WORKSURFACE FINISHES HARDSURFACE PANEL FINISHES EDGE FINISHES (3MM PVC)
M1 Light Maple CW grommets 7909-60 Fusion Maple E1 Light Maple
M2 Light Cherry BU grommets 7054-60 Wild Cherry E2 Light Cherry
M3 Medium Cherry BU grommets 7924K-70 Biltmore Cherry E3 Medium Cherry
M4 Dark Mahogany BU grommets 7040K-78 Figured Mahogany E4 Dark Mahogany
M5 Light Mahogany BU grommets 7039K-78 Windsor Mahogany E5 Light Mahogany
M6 Light Gray CW grommets D327-60 Pepperdust E6 Light Gray
M7 Off White CW grommets 1572-60 Antique White E7 Off White
M8 Gray Specks CW grommets 4621-60 White Nebula E8 Black Umber
M9 Cloud White CW grommets 1573-60 Frosty White E9 Cloud White
M10 Espresso BU grommets 7933K-07 Cafelle E10 Espresso
M11 Light Walnut CW grommets 7937-60 River Cherry E14 Light Walnut
M12 Medium Walnut BU grommets 7965L-12 Walnut Heights E15 Medium Walnut
M13 Licorice BU grommets FB3920 Licorice Groovz E13 Licorice
M14 Carob BU grommets FB3560 Driftwood E17 Carob
M15 Mousse BU grommets FB2960 Mochatini E18 Mousse
M16 Tundra CW grommets FB3930 Concrete Groovz E19 Tundra
M17 Cocoa BU grommets FB2990 Nirvana E20 Cocoa
M18 Capitan BU grommets FB3400 Aria E21 Capitan
M19 Fog CW grommets FB2100 Silver Frost E22 Fog
M20 Sandstone BU grommets FB2090 Shadow Frost E23 Sandstone
M21 Medium Oak BU grommets FB2030 Seria E24 Medium Oak
M22 Harbor BU grommets FB4310 Umbra E25 Harbor
M23 Bark BU grommets FB3970 Stromboli E26 Bark
M24 Tarmac BU grommets FB4320 Ashen E27 Tarmac
M25 Winter CW grommets FB2130 Fog Grey E28 Winter
M26 Storm BU grommets FB2000 Pewter Frost E29 Storm
M27 Medium Ash BU grommets 8842 Weathered Ash E30 Medium Ash
M28 Arctic CW grommets 8841 White Ash E31 Arctic
M29 Raven BU grommets 1595-60 Black E32 Raven
Note: Default grommets are CW or BU.Order grommet cover separately for other color.
Note: When pairing a laminate worksurface finish with hardsurface panel finsh, there may be small difference. Contact your sales rep for details.
These are the standard laminates offered for hardsurface panels and laminate end panels (ending in -LAM). See page 75)
Additional charge to use Hardsurface Panel Finishes on worksurfaces.
E11 Medium Tone
E12 Dark Tone
Note: Match edging to worksurface finish by NAME, not number, or submit order with Edge To Match (ETM).
SIM
ILA
R M
AT
CH
ING
FIN
ISH
ES
EX
AC
T M
AT
CH
ING
FIN
ISH
ES
Order samples at www.friant.com/samplesPlease Note: Images are printed
simulations and are not exact
matches of finished product. Please
request an actual sample from
Friant or your sales consultant
before specifying finishes.
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 1 & 2
6
INTR
OD
UC
TIO
N
Specifying Matching Worksurface and Hardsurface Panels
M15 Mousse
FB2960 Mochatini
E18 Mousse(or ETM)Edge To Match
Pairing a worksurface finish with a hardsurface panel finish, use the matrix on page 5 to pick the complimentary finishes.
SAMPLE ORDER:
HARDSURFACE PANEL
product #: F2HSPA.3212N
trim and top cap finish: LG
base finish: LG
laminate finish (side 1): FB2960 Mochatini
laminate finish (side 2): F4320 Ashen
WORKSURFACE
product #: FSERWS.2424L
worksurface finish: M15 Mousse
PVC edge: E18 Mousse
support finish: LG
Friant & Associates | www.friant.com
SYSTEM 1 & 2
7
INTR
OD
UC
TIO
N
SUPPORTING PEDESTALS
(See page 87)
Top of pedestal is
open to attach beneath
the worksurface.
BOX/FILE PEDESTALS
Ship standard with (2) locking
and (2) non-locking casters.
NOTE: All Cloud White pedestals have standard; Light Grey/White casters, all other finish colors have Dark Grey casters.
OPTIONAL CUSHION
Mobile pedestals can be topped
with a fabric covered cushion.
(page 88)
NOTE: Box/Box/File and File/File can use cushion but will not fit under worktops at seated height.
NOTE: Passage and Terrain fabric not available on cushion. COM is an option.
SIDE TO SIDE FILE BAR
Side to side file bar is
included. Order front to
back file bar separately for
all mobile pedestals.
(page 88)
SIDE TO SIDE FILE BAR
Side to side file bar is included.
Order front to back file bar
separately for all pedestals.
(page 88)
FRIANT pedestals are painted metal and available in a variety of options to meet
different storage needs.. Choose the type of storage, color (silver, cloud white or
black umber), and pull that you prefer (page 9). Specify Pedestals starting on
page 87.
BOX/BOX/FILE OR FILE/FILE
MOBILE PEDESTAL (page 87)
Top of pedestal is finished.
PULLS
FRIANT offers 4 different pull options to
choose from (Default Bar Pull shown).
(page 9)
LEVELLING GLIDES
Levelling glides allow you to install and
level pedestal securely on uneven flooring.
LOCKING
Keyed alike option is
available. (page 87)
LOCKING
Keyed alike option
is available.
(page 87)
Fixed and Mobile Pedestals
SUPPORTING PEDESTALS
MOBILE PEDESTALS BOX/FILE MOBILE
PEDESTAL
(page 87)
Top of pedestal
is finished.
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 1 & 2
8
INTR
OD
UC
TIO
N
FRONT TO BACK FILE BAR
Side to side file bar is included. Order front
to back file bar separately. (page 90)
COUNTERWEIGHT
To convert two drawer lateral
files to freestanding, order
counterweight. (page 90)
NOTE: 3 & 4 drawer lateral files must be bolted back-to-back or wall mounted for stability.
FRIANT freestanding lateral files are painted metal and available in a variety of
options to meet different storage needs. Choose color (silver, cloud white or black
umber), and the type of pull that you prefer (page 9) Specify Lateral Files
starting on page 89.
GLIDES
(4) Adjustable height glides
included for levelling
TOP
Finished top cap
PULLS
FRIANT offers 4 different pull
options to choose from (Bar
Pull shown) (page 9)
Lateral Files
LATERAL FILES
LOCKING
Keyed alike option is
available. (page 89)
Friant & Associates | www.friant.com
SYSTEM 1 & 2
9
INTR
OD
UC
TIO
N
You have multiple pull options. Please specify type when ordering. If you have any
questions, please contact Friant Customer Service or your local sales rep.
Pull Options, Systems Storage
BAR PULL (Standard Default)
Metal finish
DESIGNER PULL
Cloud White/Red,
Cloud White/Green,
Cloud White/Grey
(Upcharge applies to metal storage. See page 91)
Cloud White paint
Color Inset
WEDGE PULLBrushed metal finish(Upcharge applies to metal storage. See page 91)
SLANT PULLBrushed metal(Upcharge applies to metal storage. See page 91)
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 1 & 2
10
INTR
OD
UC
TIO
N
Grommet Locations
Select a My-Hite worksurface
Select a grommet location
My-Hite tops (starting on page 67) have optional grommets. Please use the two letter codes shown here when specifying location of grommets.
Grommets are 3" round with cover standard.
Choose Specify Part # Specify Finish
FDECCWS.23345823R Bark
Specify positioning by using the two letter location.
Dimensions are measured from grommet center to top edge:
For other grommet locations, please call Friant customer service.
Please Note: Only the GC location is available on the D-Shaped worksurface.
1
2
CODE POSITION
GL 4" from left side - 4" from rear
GR 4" from right side - 4" from rear
GC Centered from side to side - 4" from rear
Friant & Associates | www.friant.com
SYSTEM 2
PA
NE
LS
11
Hard-Surface Panel Non-Electrical
32” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2HSPA. 3212N 32” 12” 3.5” 18 $315 For matching worksurface to hardsurface panel, see page 6
F2HSPA. 3218N 32” 18” 3.5” 20 $315
F2HSPA. 3224N 32” 24” 3.5” 21 $369
F2HSPA. 3230N 32” 30” 3.5” 24 $445
F2HSPA. 3236N 32” 36” 3.5” 27 $521
F2HSPA. 3242N 32” 42” 3.5” 30 $570
F2HSPA. 3248N 32” 48” 3.5” 34 $591
F2HSPA. 3260N 32” 60” 3.5” 40 $712
39” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2HSPA. 3912N 39” 12” 3.5” 22 $298 For matching worksurface to hardsurface panel, see page 6
F2HSPA. 3918N 39” 18” 3.5” 24 $426
F2HSPA. 3924N 39” 24” 3.5” 26 $504
F2HSPA. 3930N 39” 30” 3.5” 27 $612
F2HSPA. 3936N 39” 36” 3.5” 31 $714
F2HSPA. 3942N 39” 42” 3.5” 36 $783
F2HSPA. 3948N 39” 48” 3.5” 39 $807
F2HSPA. 3960N 39” 60” 3.5” 46 $982
47” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2HSPA. 4712N 47” 12” 3.5” 25 $320 For matching worksurface to hardsurface panel, see page 6
F2HSPA. 4718N 47” 18” 3.5” 26 $452
F2HSPA. 4724N 47” 24” 3.5” 29 $538
F2HSPA. 4730N 47” 30” 3.5” 33 $649
F2HSPA. 4736N 47” 36” 3.5” 38 $754
F2HSPA. 4742N 47” 42” 3.5” 41 $799
F2HSPA. 4748N 47” 48” 3.5” 47 $828
F2HSPA. 4760N 47” 60” 3.5” 53 $995
DESCRIPTION SPECIFICATION OPTIONS
Structural panel with laminate surfaces, painted top caps and trim, and leveling glides.
product #: see charts belowtrim and top cap finish: LG Light Gray, MT Medium Tone, DT Dark Tonebase finish: MT Medium Tone, DT Dark Tone, LG Light Graylaminate finish (side 1): see page 5laminate finish (side 2, if applicable): see page 5
NOTES ORDER EXAMPLE
Order connectors and finished ends sepa-ratelyAdd an additional 2 weeks to the standard lead time for laminate panelsFor matching worksurface to hardsurface panel, see page 6
product #: F2HSPA.3212Ntrim and top cap finish: LGbase finish: LGlaminate finish (side 1): FB2960 Mochatinilaminate finish (side 2): FB3400 Aria
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
PA
NE
LS
12
53” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2HSPA.5312N 53" 12" 3.5” 26 $328 For matching worksurface to hardsurface panel, see page 6
F2HSPA.5318N 53" 18" 3.5” 30 $464
F2HSPA.5324N 53" 24" 3.5” 32 $550
F2HSPA.5330N 53" 30" 3.5” 38 $662
F2HSPA.5336N 53" 36" 3.5” 41 $774
F2HSPA.5342N 53" 42" 3.5” 44 $844
F2HSPA.5348N 53" 48" 3.5” 51 $870
F2HSPA.5360N 53" 60" 3.5” 57 $1,060
67” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2HSPA.6712N 67" 12" 3.5" 30 $441 For matching worksurface to hardsurface panel, see page 6
F2HSPA.6718N 67" 18" 3.5" 34 $636
F2HSPA.6724N 67" 24" 3.5" 40 $744
F2HSPA.6730N 67" 30" 3.5" 46 $872
F2HSPA.6736N 67" 36" 3.5" 51 $1,018
F2HSPA.6742N 67" 42" 3.5" 57 $1,132
F2HSPA.6748N 67" 48" 3.5" 64 $1,162
F2HSPA.6760N 67" 60" 3.5" 74 $1,459
62” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2HSPA.6212N 62" 12” 3.5” 28 $386 For matching worksurface to hardsurface panel, see page 6
F2HSPA.6218N 62" 18” 3.5” 32 $550
F2HSPA.6224N 62" 24” 3.5” 36 $651
F2HSPA.6230N 62" 30” 3.5” 42 $757
F2HSPA.6236N 62" 36” 3.5” 47 $913
F2HSPA.6242N 62" 42” 3.5” 51 $999
F2HSPA.6248N 62" 48” 3.5” 58 $1,037
F2HSPA.6260N 62" 60” 3.5” 66 $1,267
85” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2HSPA.8512N 85" 12" 3.5” 25 $549 For matching worksurface to hardsurface panel, see page 6
F2HSPA.8518N 85" 18" 3.5” 26 $798
F2HSPA.8524N 85" 24" 3.5” 29 $946
F2HSPA.8530N 85" 30" 3.5” 33 $1,148
F2HSPA.8536N 85" 36" 3.5” 38 $1,341
F2HSPA.8542N 85" 42" 3.5” 41 $1,481
F2HSPA.8548N 85" 48" 3.5” 47 $1,528
F2HSPA.8560N 85" 60" 3.5” 86 $1,866
Friant & Associates | www.friant.com
SYSTEM 2
PA
NE
LS
13
32” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2HSPA.3212E 32" 12" 3.5" 19 $428 For matching worksurface to hardsurface panel, see page 6
F2HSPA.3218E 32" 18" 3.5" 21 $428
F2HSPA.3224E 32" 24" 3.5" 22 $483
F2HSPA.3230E 32" 30" 3.5" 25 $578
F2HSPA.3236E 32" 36" 3.5" 29 $669
F2HSPA.3242E 32" 42" 3.5" 32 $736
F2HSPA.3248E 32" 48" 3.5" 37 $775
F2HSPA.3260E 32" 60" 3.5" 45 $931
39” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2HSPA.3912E 39" 12" 3.5" 23 $412 For matching worksurface to hardsurface panel, see page 6
F2HSPA.3918E 39" 18" 3.5" 25 $540
F2HSPA.3924E 39" 24" 3.5" 27 $618
F2HSPA.3930E 39" 30" 3.5" 29 $745
F2HSPA.3936E 39" 36" 3.5" 33 $861
F2HSPA.3942E 39" 42" 3.5" 38 $949
F2HSPA.3948E 39" 48" 3.5" 42 $991
F2HSPA.3960E 39" 60" 3.5" 51 $1,202
Hard-Surface Panel
DESCRIPTION SPECIFICATION OPTIONS
Structural panel with laminate surfaces, painted top caps and trim, leveling glides, 4-circuit power installed in cable management raceway covers.
product #: see charts belowtrim and top cap finish: LG Light Gray, MT Medium Tone, DT Dark Tonebase finish: MT Medium Tone, DT Dark Tone, LG Light Graylaminate finish (side 1): see page 5laminate finish (side 2, if applicable): see page 5
NOTES ORDER EXAMPLE
12” and 18” wide panels have no receptacle. 24” wide panels have one receptacle per side. 30”- 60” wide panels have two receptacle locations per side. 12” and 18” wide panels have a panel pass-through power jumper.Order receptacles, connectors, connector power kit and finished ends separately.Add an additional 2 weeks to the standard lead time for laminate panelsFor matching worksurface to hardsurface panel, see page 6.
product #: F2HSPA.3212Etrim and top cap finish: LGbase finish: LGlaminate finish (side 1): FB2960 Mochatinilaminate finish (side 2): FB3400 Aria
Electrical
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
PA
NE
LS
14
53” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2HSPA.5312E 53" 12" 3.5" 27 $442 For matching worksurface to hardsurface panel, see page 6
F2HSPA.5318E 53" 18" 3.5" 31 $578
F2HSPA.5324E 53" 24" 3.5" 33 $665
F2HSPA.5330E 53" 30" 3.5" 40 $795
F2HSPA.5336E 53" 36" 3.5" 43 $921
F2HSPA.5342E 53" 42" 3.5" 47 $1,010
F2HSPA.5348E 53" 48" 3.5" 53 $1,053
F2HSPA.5360E 53" 60" 3.5" 62 $1,280
62” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2HSPA.6212E 62" 12" 3.5" 29 $500 For matching worksurface to hardsurface panel, see page 6
F2HSPA.6218E 62" 18" 3.5" 33 $663
F2HSPA.6224E 62" 24" 3.5" 36 $765
F2HSPA.6230E 62" 30" 3.5" 44 $891
F2HSPA.6236E 62" 36" 3.5" 49 $1,060
F2HSPA.6242E 62" 42" 3.5" 54 $1,165
F2HSPA.6248E 62" 48" 3.5" 61 $1,221
F2HSPA.6260E 62" 60" 3.5" 71 $1,487
47” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2HSPA.4712E 47" 12" 3.5" 25 $434 For matching worksurface to hardsurface panel, see page 6
F2HSPA.4718E 47" 18" 3.5" 27 $566
F2HSPA.4724E 47" 24" 3.5" 30 $652
F2HSPA.4730E 47" 30" 3.5" 35 $783
F2HSPA.4736E 47" 36" 3.5" 40 $902
F2HSPA.4742E 47" 42" 3.5" 43 $965
F2HSPA.4748E 47" 48" 3.5" 50 $1,012
F2HSPA.4760E 47" 60" 3.5" 58 $1,215
Friant & Associates | www.friant.com
SYSTEM 2
PA
NE
LS
15
67” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2HSPA.6712E 67" 12" 3.5" 31 $555 For matching worksurface to hardsurface panel, see page 6
F2HSPA.6718E 67" 18" 3.5" 35 $749
F2HSPA.6724E 67" 24" 3.5" 41 $859
F2HSPA.6730E 67" 30" 3.5" 47 $1,006
F2HSPA.6736E 67" 36" 3.5" 53 $1,165
F2HSPA.6742E 67" 42" 3.5" 59 $1,298
F2HSPA.6748E 67" 48" 3.5" 67 $1,346
F2HSPA.6760E 67" 60" 3.5" 79 $1,679
85” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2HSPA.8512E 85" 12" 3.5" 39 $662 For matching worksurface to hardsurface panel, see page 6
F2HSPA.8518E 85" 18" 3.5" 42 $911
F2HSPA.8524E 85" 24" 3.5" 50 $1,061
F2HSPA.8530E 85" 30" 3.5" 59 $1,282
F2HSPA.8536E 85" 36" 3.5" 67 $1,488
F2HSPA.8542E 85" 42" 3.5" 75 $1,647
F2HSPA.8548E 85" 48" 3.5" 84 $1,711
F2HSPA.8560E 85" 60" 3.5" 91 $2,086
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
PA
NE
LS
16
DESCRIPTION SPECIFICATION OPTIONS
Structural panel with laminate lower surfaces and 14” high tempered glass top section, painted top caps and trim, leveling glides, and cable management side covers.
product #: see charts belowtrim and top cap finish: LG Light Gray, MT Medium Tone, DT Dark Tonebase finish: MT Medium Tone, DT Dark Tone, LG Light Graypanel glazing: TR Clear, FR Frostedlaminate finish (side 1): see page 5laminate finish (side 2, if applicable): see page 5
NOTES ORDER EXAMPLE
Order connectors and finished ends sepa-rately.Add an additional 2 weeks to the standard lead time for laminate panels.Cannot be used as dry erase surface.For matching worksurface to hardsurface panel, see page 6
product #: F2PGHSPA.5312Ntrim and top cap finish: LGbase finish: LGpanel glazing: TR Clearlaminate finish (side 1): FB2960 Mochatinilaminate finish (side 2): FB3400 Aria
53” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2PGHSPA.5324N 53" 24" 3.5” 32 $800 For matching worksurface to hardsurface panel, see page 6
F2PGHSPA.5330N 53" 30" 3.5” 38 $912
F2PGHSPA.5336N 53" 36" 3.5” 41 $1024
F2PGHSPA.5342N 53" 42" 3.5” 44 $1094
F2PGHSPA.5348N 53" 48" 3.5” 51 $1120
F2PGHSPA.5360N 53" 60" 3.5” 57 $1310
67” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2PGHSPA.6724N 67" 24" 3.5" 40 $994 For matching worksurface to hardsurface panel, see page 6
F2PGHSPA.6730N 67" 30" 3.5" 46 $1122
F2PGHSPA.6736N 67" 36" 3.5" 51 $1268
F2PGHSPA.6742N 67" 42" 3.5" 57 $1382
F2PGHSPA.6748N 67" 48" 3.5" 64 $1412
F2PGHSPA.6760N 67" 60" 3.5" 74 $1709
85” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2PGHSPA.8524N 85" 24" 3.5” 29 $1196 For matching worksurface to hardsurface panel, see page 6
F2PGHSPA.8530N 85" 30" 3.5” 33 $1398
F2PGHSPA.8536N 85" 36" 3.5” 38 $1591
F2PGHSPA.8542N 85" 42" 3.5” 41 $1731
F2PGHSPA.8548N 85" 48" 3.5” 47 $1778
F2PGHSPA.8560N 85" 60" 3.5” 86 $2116
Non-ElectricalHard-Surface Glazed Panel
Friant & Associates | www.friant.com
SYSTEM 2
PA
NE
LS
17
Hard-Surface Partial Glazed Panel
DESCRIPTION SPECIFICATION OPTIONS
Structural panel with laminate lower surfaces and 14” high tempered glass top section, painted top caps and trim, leveling glides, 4-circuit power installed in cable management raceway covers.
product #: see charts belowtrim and top cap finish: LG Light Gray, MT Medium Tone, DT Dark Tonebase finish: MT Medium Tone, DT Dark Tone, LG Light Graypanel glazing: TR Clear, FR Frosted laminate finish (side 1): see page 5laminate finish (side 2, if applicable): see page 5
NOTES ORDER EXAMPLE
24” wide panels have one receptacle per side.30” and 60” wide panels have two receptacle locations per side.Order receptacles separately.Order connectors and finished ends separately.Order connector power kit separately.Add an additional 2 weeks to the standard lead time for laminate panelsCannot be used as dry erase surface.For matching surface to hardsurface panel, see page 6
product #: F2PGHSPA.5312Etrim and top cap finish: LGbase finish: LGpanel glazing: TR Clearlaminate finish (side 1): FB2960 Mochatinilaminate finish (side 2): FB3400 Aria
53” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2PGHSPA.5324E 53" 24" 3.5" 33 $915 For matching worksurface to hardsurface panel, see page 6
F2PGHSPA.5330E 53" 30" 3.5" 40 $1045
F2PGHSPA.5336E 53" 36" 3.5" 43 $1171
F2PGHSPA.5342E 53" 42" 3.5" 47 $1260
F2PGHSPA.5348E 53" 48" 3.5" 53 $1303
F2PGHSPA.5360E 53" 60" 3.5" 62 $1530
67” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2PGHSPA.6724E 67" 24" 3.5" 41 $1109 For matching worksurface to hardsurface panel, see page 6
F2PGHSPA.6730E 67" 30" 3.5" 47 $1256
F2PGHSPA.6736E 67" 36" 3.5" 53 $1415
F2PGHSPA.6742E 67" 42" 3.5" 59 $1548
F2PGHSPA.6748E 67" 48" 3.5" 67 $1596
F2PGHSPA.6760E 67" 60" 3.5" 79 $1929
85” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2PGHSPA.8524E 85" 24" 3.5" 50 $1311 For matching worksurface to hardsurface panel, see page 6
F2PGHSPA.8530E 85" 30" 3.5" 59 $1532
F2PGHSPA.8536E 85" 36" 3.5" 67 $1738
F2PGHSPA.8542E 85" 42" 3.5" 75 $1897
F2PGHSPA.8548E 85" 48" 3.5" 84 $1961
F2PGHSPA.8560E 85" 60" 3.5" 91 $2336
Electrical
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
PA
NE
LS
18
DESCRIPTION
Structural panel with fabric surfaces, painted top caps and trim, leveling glides, and cable management side covers.
NOTES
• Order connectors and finished ends separately.
• Standard fabric application for panels 67” and below is horizontal application. Panels taller than 67” are only available in vertical application. When ordering panels 67” and below to match a panel taller than 67”, specify vertical application.
SPECIFICATION OPTIONS
product #: see charts belowtrim and top cap finish: LG Light Gray, MT Medium Tone, DT Dark Tonebase finish: MT Medium Tone, DT Dark Tone, LG Light Grayfabric (side 1): see page 4fabric (side 2, if applicable): see page 4
ORDER EXAMPLE
product #: F2FAPA.3212Ntrim and top cap finish: LGbase finish: DTfabric (side 1): PF401-1 Silky - Naturalfabric (side 2): PF401-2 Silky - Parids
32” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2FAPA.3212N 32" 12" 3.5" 18 $287
F2FAPA.3218N 32" 18" 3.5" 20 $305
F2FAPA.3224N 32" 24" 3.5" 21 $308
F2FAPA.3230N 32" 30" 3.5" 24 $338
F2FAPA.3236N 32" 36" 3.5" 27 $382
F2FAPA.3242N 32" 42" 3.5" 30 $403
F2FAPA.3248N 32" 48" 3.5" 34 $424
F2FAPA.3260N 32" 60" 3.5" 40 $526
39” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2FAPA.3912N 39" 12" 3.5" 22 $299
F2FAPA.3918N 39" 18" 3.5" 24 $318
F2FAPA.3924N 39" 24" 3.5" 26 $321
F2FAPA.3930N 39" 30" 3.5" 27 $352
F2FAPA.3936N 39" 36" 3.5" 31 $398
F2FAPA.3942N 39" 42" 3.5" 36 $420
F2FAPA.3948N 39" 48" 3.5" 39 $441
F2FAPA.3960N 39" 60" 3.5" 46 $547
Fabric-Covered Panel
47” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2FAPA.4712N 47" 12" 3.5" 25 $317
F2FAPA.4718N 47" 18" 3.5" 26 $335
F2FAPA.4724N 47" 24" 3.5" 29 $340
F2FAPA.4730N 47" 30" 3.5" 33 $381
F2FAPA.4736N 47" 36" 3.5" 38 $436
F2FAPA.4742N 47" 42" 3.5" 41 $483
F2FAPA.4748N 47" 48" 3.5" 47 $498
F2FAPA.4760N 47" 60" 3.5" 53 $615
Non-Electrical
Friant & Associates | www.friant.com
SYSTEM 2
PA
NE
LS
19
53” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2FAPA.5312N 53" 12" 3.5" 26 $324
F2FAPA.5318N 53" 18" 3.5" 30 $345
F2FAPA.5324N 53" 24" 3.5" 32 $348
F2FAPA.5330N 53" 30" 3.5" 38 $395
F2FAPA.5336N 53" 36" 3.5" 41 $463
F2FAPA.5342N 53" 42" 3.5" 44 $500
F2FAPA.5348N 53" 48" 3.5" 51 $533
F2FAPA.5360N 53" 60" 3.5" 57 $657
67” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2FAPA.6712N 67" 12" 3.5" 30 $346
F2FAPA.6718N 67" 18" 3.5" 34 $394
F2FAPA.6724N 67" 24" 3.5" 40 $405
F2FAPA.6730N 67" 30" 3.5" 46 $455
F2FAPA.6736N 67" 36" 3.5" 51 $527
F2FAPA.6742N 67" 42" 3.5" 57 $562
F2FAPA.6748N 67" 48" 3.5" 64 $599
F2FAPA.6760N 67" 60" 3.5" 74 $740
62” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2FAPA.6212N 62" 12" 3.5" 28 $337
F2FAPA.6218N 62" 18" 3.5" 32 $387
F2FAPA.6224N 62" 24" 3.5" 36 $398
F2FAPA.6230N 62" 30" 3.5" 42 $447
F2FAPA.6236N 62" 36" 3.5" 47 $520
F2FAPA.6242N 62" 42" 3.5" 51 $554
F2FAPA.6248N 62" 48" 3.5" 58 $594
F2FAPA.6260N 62" 60" 3.5" 66 $737
85” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2FAPA.8512N 85" 12" 3.5" 38 $395 Standard fabric application for panels 67” and below is horizontal application. Panels taller than 67” are only available in vertical application. When ordering panels 67” and below to match a panel taller than 67”, specify vertical application.
F2FAPA.8518N 85" 18" 3.5" 41 $469
F2FAPA.8524N 85" 24" 3.5" 50 $479
F2FAPA.8530N 85" 30" 3.5" 58 $532
F2FAPA.8536N 85" 36" 3.5" 65 $616
F2FAPA.8542N 85" 42" 3.5" 73 $655
F2FAPA.8548N 85" 48" 3.5" 81 $696
F2FAPA.8560N 85" 60" 3.5" 86 $862
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
PA
NE
LS
20
DESCRIPTION
Structural panel with fabric surfaces, painted top caps and trim, leveling glides, 4-circuit power installed in cable management raceway covers.
NOTES
• 12” and 18” wide panels have no receptacle.• 24” wide panels have one receptacle per side.• 30” - 60” wide panels have two receptacle
locations per side.• 12” and 18” wide panels have a panel pass-
through power jumper.• Order receptacles separately.• Order connectors and finished ends
separately.• Order Pass-Through Festoon separately.• Standard fabric application for panels 67”
and below is horizontal application. Panels taller than 67” are only available in vertical application. When ordering panels 67” and below to match a panel taller than 67”, specify vertical application.
SPECIFICATION OPTIONS
product #: see charts belowtrim and top cap finish: LG Light Gray, MT Medium Tone, DT Dark Tonebase finish: MT Medium Tone, DT Dark Tone, LG Light Grayfabric (side 1): see page 4fabric (side 2, if applicable): see page 4
ORDER EXAMPLE
product #: F2FAPA.3212Etrim and top cap finish: LGbase finish: DTfabric (side 1): PF401-1 Silky - Naturalfabric (side 2): PF401-2 Silky - Parids
32” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2FAPA.3212E 32" 12" 3.5" 19 $418
F2FAPA.3218E 32" 18" 3.5" 21 $428
F2FAPA.3224E 32" 24" 3.5" 22 $439
F2FAPA.3230E 32" 30" 3.5" 25 $469
F2FAPA.3236E 32" 36" 3.5" 29 $512
F2FAPA.3242E 32" 42" 3.5" 32 $533
F2FAPA.3248E 32" 48" 3.5" 37 $554
F2FAPA.3260E 32" 60" 3.5" 45 $656
39” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2FAPA.3912E 39" 12" 3.5" 23 $429
F2FAPA.3918E 39" 18" 3.5" 25 $441
F2FAPA.3924E 39" 24" 3.5" 27 $452
F2FAPA.3930E 39" 30" 3.5" 29 $482
F2FAPA.3936E 39" 36" 3.5" 33 $528
F2FAPA.3942E 39" 42" 3.5" 38 $550
F2FAPA.3948E 39" 48" 3.5" 42 $571
F2FAPA.3960E 39" 60" 3.5" 51 $677
Fabric-Covered Panel
47” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2FAPA.4712E 47" 12" 3.5" 25 $447
F2FAPA.4718E 47" 18" 3.5" 27 $460
F2FAPA.4724E 47" 24" 3.5" 30 $471
F2FAPA.4730E 47" 30" 3.5" 35 $511
F2FAPA.4736E 47" 36" 3.5" 40 $566
F2FAPA.4742E 47" 42" 3.5" 43 $614
F2FAPA.4748E 47" 48" 3.5" 50 $629
F2FAPA.4760E 47" 60" 3.5" 58 $745
Electrical
Friant & Associates | www.friant.com
SYSTEM 2
PA
NE
LS
21
53” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2FAPA.5312E 53" 12" 3.5" 27 $455
F2FAPA.5318E 53" 18" 3.5" 31 $467
F2FAPA.5324E 53" 24" 3.5" 33 $478
F2FAPA.5330E 53" 30" 3.5" 40 $526
F2FAPA.5336E 53" 36" 3.5" 43 $594
F2FAPA.5342E 53" 42" 3.5" 47 $631
F2FAPA.5348E 53" 48" 3.5" 53 $664
F2FAPA.5360E 53" 60" 3.5" 62 $788
67” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2FAPA.6712E 67" 12" 3.5" 31 $476
F2FAPA.6718E 67" 18" 3.5" 35 $525
F2FAPA.6724E 67" 24" 3.5" 41 $535
F2FAPA.6730E 67" 30" 3.5" 47 $585
F2FAPA.6736E 67" 36" 3.5" 53 $657
F2FAPA.6742E 67" 42" 3.5" 59 $692
F2FAPA.6748E 67" 48" 3.5" 67 $729
F2FAPA.6760E 67" 60" 3.5" 79 $870
62” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2FAPA.6212E 62" 12" 3.5" 29 $467
F2FAPA.6218E 62" 18" 3.5" 33 $517
F2FAPA.6224E 62" 24" 3.5" 36 $528
F2FAPA.6230E 62" 30" 3.5" 44 $578
F2FAPA.6236E 62" 36" 3.5" 49 $651
F2FAPA.6242E 62" 42" 3.5" 54 $685
F2FAPA.6248E 62" 48" 3.5" 61 $724
F2FAPA.6260E 62" 60" 3.5" 71 $867
85” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2FAPA.8512E 85" 12" 3.5" 39 $526 Standard fabric application for panels 67” and below is horizontal application. Panels taller than 67” are only available in vertical application. When ordering panels 67” and below to match a panel taller than 67”, specify vertical application.
F2FAPA.8518E 85" 18" 3.5" 42 $599
F2FAPA.8524E 85" 24" 3.5" 50 $610
F2FAPA.8530E 85" 30" 3.5" 59 $663
F2FAPA.8536E 85" 36" 3.5" 67 $746
F2FAPA.8542E 85" 42" 3.5" 75 $785
F2FAPA.8548E 85" 48" 3.5" 84 $827
F2FAPA.8560E 85" 60" 3.5" 91 $992
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
PA
NE
LS
22
DESCRIPTION
Sound reducing, structural panel with fabric surfaces, painted top cap and trim, leveling glides and cable management side covers.
NOTES
• Order connectors and finished ends separately.
• Standard fabric application for panels 67” and below is horizontal application. Panels taller than 67” are only available in vertical application. When ordering panels 67” and below to match a panel taller than 67”, specify vertical application.
• Passage and Terrain are not available on acoustical panels.
SPECIFICATION OPTIONS
product #: see charts belowtrim and top cap finish: LG Light Gray, MT Medium Tone, DT Dark Tonebase finish: MT Medium Tone, DT Dark Tone, LG Light Grayfabric (side 1): see page 4fabric (side 2, if applicable): see page 4
ORDER EXAMPLE
product #: F2ACPA.5312Ntrim and top cap finish: LGbase finish: DTfabric (side 1): PF401-1 Silky - Naturalfabric (side 2): PF401-2 Silky - Parids
53” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2ACPA.5312N 53” 12" 3.5" 26 $442
F2ACPA.5318N 53” 18" 3.5" 30 $497
F2ACPA.5324N 53” 24" 3.5" 32 $500
F2ACPA.5330N 53” 30" 3.5" 38 $544
F2ACPA.5336N 53” 36" 3.5" 41 $606
F2ACPA.5342N 53” 42" 3.5" 44 $637
F2ACPA.5348N 53” 48" 3.5" 51 $672
F2ACPA.5360N 53” 60" 3.5" 57 $824
62” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2ACPA.6212N 62" 12" 3.5" 28 $460
F2ACPA.6218N 62" 18" 3.5" 32 $497
F2ACPA.6224N 62” 24" 3.5" 36 $504
F2ACPA.6230N 62” 30" 3.5" 42 $547
F2ACPA.6236N 62” 36" 3.5" 47 $615
F2ACPA.6242N 62” 42" 3.5" 51 $643
F2ACPA.6248N 62” 48" 3.5" 58 $679
F2ACPA.6260N 62” 60" 3.5" 66 $830
Acoustical Panel
67” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2ACPA.6712N 67" 12" 3.5" 30 $472
F2ACPA.6718N 67” 18" 3.5" 34 $515
F2ACPA.6724N 67” 24" 3.5" 40 $520
F2ACPA.6730N 67" 30" 3.5" 46 $564
F2ACPA.6736N 67" 36" 3.5" 51 $632
F2ACPA.6742N 67" 42" 3.5" 57 $660
F2ACPA.6748N 67" 48" 3.5" 64 $699
F2ACPA.6760N 67" 60" 3.5" 74 $841
Non-Electrical
Friant & Associates | www.friant.com
SYSTEM 2
PA
NE
LS
23
85” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2ACPA.8512N 85" 12" 3.5" 38 $542 Standard fabric application for panels 67” and below is horizontal application. Panels taller than 67” are only available in vertical application. When ordering panels 67” and below to match a panel taller than 67”, specify vertical application.
F2ACPA.8518N 85” 18" 3.5" 41 $593
F2ACPA.8524N 85” 24" 3.5" 50 $594
F2ACPA.8530N 85” 30" 3.5" 58 $649
F2ACPA.8536N 85” 36" 3.5" 65 $732
F2ACPA.8542N 85” 42" 3.5" 73 $773
F2ACPA.8548N 85” 48" 3.5" 81 $824
F2ACPA.8560N 85” 60" 3.5" 86 $1009
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
PA
NE
LS
24
DESCRIPTION
Sound reducing, structural panel with fabric surfaces, painted top cap and trim, leveling glides, 4-circuit power installed in cable management raceway covers.
NOTES
• 12” and 18” wide panels have no receptacle.• 24” wide panels have one receptacle per side.• 30” - 60” wide panels have two
receptacle locations per side.• 12” and 18” wide panels have a panel
pass-through power jumper.• Order receptacles separately.• Order connectors and finished ends
separately.• Order Pass-Through Festoon separately.• Standard fabric application for panels 67”
and below is horizontal application. Panels taller than 67” are only available in vertical application. When ordering panels 67” and below to match a panel taller than 67”, specify vertical application.
• Passage and Terrain are not available on acoustical panels.
SPECIFICATION OPTIONS
product #: see charts belowtrim and top cap finish: LG Light Gray, MT Medium Tone, DT Dark Tonebase finish: MT Medium Tone, DT Dark Tone, LG Light Grayfabric (side 1): see page 4fabric (side 2, if applicable): see page 4
ORDER EXAMPLE
product #: F2ACPA.5312Etrim and top cap finish: LGbase finish: DTfabric (side 1): PF401-1 Silky - Naturalfabric (side 2): PF401-2 Silky - Parids
53” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2ACPA.5312E 53" 12" 3.5" 27 $572
F2ACPA.5318E 53" 18" 3.5" 31 $628
F2ACPA.5324E 53" 24" 3.5" 33 $631
F2ACPA.5330E 53" 30" 3.5" 40 $674
F2ACPA.5336E 53" 36" 3.5" 43 $737
F2ACPA.5342E 53" 42" 3.5" 47 $767
F2ACPA.5348E 53" 48" 3.5" 53 $802
F2ACPA.5360E 53" 60" 3.5" 62 $954
62” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2ACPA.6212E 62" 12" 3.5" 29 $590
F2ACPA.6218E 62" 18" 3.5" 33 $628
F2ACPA.6224E 62" 24" 3.5" 36 $634
F2ACPA.6230E 62" 30" 3.5" 44 $677
F2ACPA.6236E 62" 36" 3.5" 49 $745
F2ACPA.6242E 62" 42" 3.5" 54 $774
F2ACPA.6248E 62" 48" 3.5" 61 $810
F2ACPA.6260E 62" 60" 3.5" 71 $960
Acoustical Panel Electrical
Friant & Associates | www.friant.com
SYSTEM 2
PA
NE
LS
25
67” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2ACPA.6712E 67" 12" 3.5" 31 $602
F2ACPA.6718E 67" 18" 3.5" 35 $646
F2ACPA.6724E 67" 24" 3.5" 41 $651
F2ACPA.6730E 67" 30" 3.5" 47 $694
F2ACPA.6736E 67" 36" 3.5" 53 $762
F2ACPA.6742E 67" 42" 3.5" 59 $791
F2ACPA.6748E 67" 48" 3.5" 67 $829
F2ACPA.6760E 67" 60" 3.5" 79 $971
85” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2ACPA.8512E 85" 12" 3.5" 39 $672 Standard fabric application for panels 67” and below is horizontal application. Panels taller than 67” are only available in vertical application. When ordering panels 67” and below to match a panel taller than 67”, specify vertical application.
F2ACPA.8518E 85" 18" 3.5" 42 $723
F2ACPA.8524E 85" 24" 3.5" 50 $724
F2ACPA.8530E 85" 30" 3.5" 59 $779
F2ACPA.8536E 85" 36" 3.5" 67 $863
F2ACPA.8542E 85" 42" 3.5" 75 $903
F2ACPA.8548E 85" 48" 3.5" 84 $954
F2ACPA.8560E 85" 60" 3.5" 91 $1,140
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
PA
NE
LS
26
DESCRIPTION
Structural panel with fabric covered lower surfaces and 14” high tempered glass top section, painted top cap and cable management side covers.
NOTES
• Order connectors and finished ends separately.
• Cannot be used as dry erase surface.
SPECIFICATION OPTIONS
product #: see charts belowtrim and top cap finish: LG Light Gray, MT Medium Tone, DT Dark Tonepanel glazing: TR Clear, FR Frostedbase finish: MT Medium Tone, DT Dark Tone, LG Light Grayfabric (side 1): see page 4fabric (side 2, if applicable): see page 4
ORDER EXAMPLE
product #: F2 PGPA.5324Ntrim and top cap finish: LGpanel glazing: TRbase finish: DTfabric (side 1): PF401-1 Silky - Naturalfabric (side 2): PF401-2 Silky - Parids
53” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2 PGPA.5324N 53" 24" 3.5" 37 $533
F2 PGPA.5330N 53" 30" 3.5" 41 $581
F2 PGPA.5336N 53" 36" 3.5" 47 $702
F2 PGPA.5342N 53" 42" 3.5" 54 $739
F2 PGPA.5348N 53" 48" 3.5" 61 $809
F2 PGPA.5360N 53" 60" 3.5" 73 $933
67” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2 PGPA.6724N 67" 24" 3.5" 42 $590
F2 PGPA.6730N 67" 30" 3.5" 50 $640
F2 PGPA.6736N 67" 36" 3.5" 56 $765
F2 PGPA.6742N 67" 42" 3.5" 62 $800
F2 PGPA.6748N 67" 48" 3.5" 71 $875
F2 PGPA.6760N 67" 60" 3.5" 82 $1,015
Partial-Glazed Panel
85” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2 PGPA.8524N 85" 24" 3.5" 49 $665
F2 PGPA.8530N 85" 30" 3.5" 57 $718
F2 PGPA.8536N 85" 36" 3.5" 65 $854
F2 PGPA.8542N 85" 42" 3.5" 73 $894
F2 PGPA.8548N 85" 48" 3.5" 83 $972
F2 PGPA.8560N 85" 60" 3.5" 97 $1,137
Non-Electrical
Friant & Associates | www.friant.com
SYSTEM 2
PA
NE
LS
27
DESCRIPTION
Structural panel with fabric covered lower surfaces and 14” high tempered glass top section, painted top cap and leveling glides, 4-circuit power installed in cable management raceway covers.
NOTES
• 12” and 18” wide panels have no receptacle.• 24” wide panels have one receptacle per side.• 30” - 60” wide panels have two
receptacle locations per side.• Order connectors and finished ends
separately.• Order Pass-Through Festoon separately.• Cannot be used as dry erase surface.
SPECIFICATION OPTIONS
product #: see charts belowtrim and top cap finish: LG Light Gray, MT Medium Tone, DT Dark Tonepanel glazing: TR Clear, FR Frostedbase finish: MT Medium Tone, DT Dark Tone, LG Light Grayfabric (side 1): see page 4fabric (side 2, if applicable): see page 4
ORDER EXAMPLE
product #: F2PGPA.5324Etrim and top cap finish: LGpanel glazing: TRbase finish: DTfabric (side 1): PF101-1 Slide - Caramelfabric (side 2, if applicable): PF101-6 Slide - Vintage
53” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2 PGPA.5324E 53" 24" 3.5" 38 $664
F2 PGPA.5330E 53" 30" 3.5" 42 $711
F2 PGPA.5336E 53" 36" 3.5" 49 $832
F2 PGPA.5342E 53" 42" 3.5" 56 $869
F2 PGPA.5348E 53" 48" 3.5" 63 $939
F2 PGPA.5360E 53" 60" 3.5" 77 $1,063
67” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2 PGPA.6724E 67" 24" 3.5" 43 $721
F2 PGPA.6730E 67" 30" 3.5" 52 $771
F2 PGPA.6736E 67" 36" 3.5" 57 $896
F2 PGPA.6742E 67" 42" 3.5" 64 $931
F2 PGPA.6748E 67" 48" 3.5" 74 $1,005
F2 PGPA.6760E 67" 60" 3.5" 86 $1,146
Partial-Glazed Panel
85” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2 PGPA.8524E 85" 24" 3.5" 50 $795
F2 PGPA.8530E 85" 30" 3.5" 58 $848
F2 PGPA.8536E 85" 36" 3.5" 67 $985
F2 PGPA.8542E 85" 42" 3.5" 75 $1,024
F2 PGPA.8548E 85" 48" 3.5" 85 $1,102
F2 PGPA.8560E 85" 60" 3.5" 101 $1,268
Electrical
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
PA
NE
LS
28
DESCRIPTION
Painted frame with 36” wide lockable laminate door and 6” wide glazed side panel, painted top cap and leveling glides.
NOTES
• Door hangs left or right, swings in or out.• Order connectors and finished ends
separately.• When connecting a Door Panel to a 2- or
3-Way Post, there will be a small gap at the base, between the trim and the door.
SPECIFICATION OPTIONS
product #: see charts belowtrim, top cap & door finish: LG Light Gray, MT Medium Tone, DT Dark Tonebase finish: MT Medium Tone, DT Dark Tone, LG Light Graypanel glazing: TR Clear, FR Frosted
ORDER EXAMPLE
product #: F2DOPA.8548trim, top cap & door finish: LGbase finish: MTpanel glazing: TR
85” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2DOPA.8548 85" 48" 3.5" 111 $3,180
Door Panel
Friant & Associates | www.friant.com
SYSTEM 2
PA
NE
L H
AR
DW
AR
E
29
DESCRIPTION
Panel hardware to connect two panels in a straight line.
NOTES
• When connecting panels of different heights to each other, order Draw Rod Change of Height.
• Draw Rods are 5” shorter than the panel height.
SPECIFICATION OPTIONS
product #: see charts below
ORDER EXAMPLE
product #: FDR.27
Draw Rod
DRAW ROD
DRAW RODCHANGE OF HEIGHT
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FDR.27 27" — — 1 $15 Rod and block assembly connects
two panels at 180° (straight line)
Color: DT Dark Tone
FDR.34 34" — — 1 $16
FDR.42 42" — — 1 $16
FDR.48 48" — — 1 $17
FDR.57 57" — — 1 $17
FDR.62 62" — — 1 $17
FDR.80 80" — — 2 $18
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FDRCH.27 27" — — 1 $32 Rod and block assembly connects two panels at 180° (straight line) when the panels are of different height.
Order the height of the shorter panel.
Includes Hanger Rail to match the height of the shorter panelRemove Hanger Rail from taller panel and replace with the shorter Hanger Rail.
Color: DT Dark Tone.
FDRCH.34 34" — — 1 $32
FDRCH.42 42" — — 1 $32
FDRCH.48 48" — — 1 $37
FDRCH.57 57" — — 1 $37
FDRCH.62 62" — — 1 $37
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
PA
NE
L H
AR
DW
AR
E
30
DESCRIPTION
Panel hardware to connect 2, 3 or 4 panels at 90°, 120° or 135°.
NOTES
SPECIFICATION OPTIONS
product #: see charts belowfinish: LG Light Gray, MT Medium Tone, DT Dark Tonebase finish: MT Medium Tone, DT Dark Tone, LG Light Gray
ORDER EXAMPLE
product #: F22W.32finish: DTbase finish: DT
Connectors
2-WAY 90° CONNECTOR POSTHARD SURFACE
2-WAY 120° CONNECTOR POSTHARD SURFACE
2-WAY 135° CONNECTOR POSTHARD SURFACE
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F22W.32 32" 3.5" 3.5" 3 $103 Connects 2 panels at 90°.
Includes cable management trim cover.
F22W.39 39" 3.5" 3.5" 4 $103
F22W.47 47" 3.5" 3.5" 5 $113
F22W.53 53" 3.5" 3.5" 6 $120
F22W.62 62" 3.5" 3.5" 7 $128
F22W.67 67" 3.5" 3.5" 7 $130
F22W.85 85" 3.5" 3.5" 8 $147
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F22W-120.32 32" 3.5" 3.5" 3 $103 Connects 2 panels at 120°.
Includes cable management trim cover.
Check for availability.
F22W-120.39 39" 3.5" 3.5" 4 $103
F22W-120.47 47" 3.5" 3.5" 5 $113
F22W-120.53 53" 3.5" 3.5" 6 $120
F22W-120.62 62" 3.5" 3.5" 7 $128
F22W-120.67 67" 3.5" 3.5" 7 $130
F22W-120.85 85" 3.5" 3.5" 8 $147
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F22W-135.32 32" 3.5" 3.5" 3 $156 Connects 2 panels at 135°.
Includes cable management trim cover.
Check for availability.
F22W-135.39 39" 3.5" 3.5" 4 $162
F22W-135.47 47" 3.5" 3.5" 5 $174
F22W-135.53 53" 3.5" 3.5" 6 $184
F22W-135.62 62" 3.5" 3.5" 7 $200
F22W-135.67 67" 3.5" 3.5" 7 $202
F22W-135.85 85" 3.5" 3.5" 8 $230
Friant & Associates | www.friant.com
SYSTEM 2
PA
NE
L H
AR
DW
AR
E
31
3-WAY 90° CONNECTOR POSTHARD SURFACE
3-WAY 120° CONNECTOR POSTHARD SURFACE
4-WAY 90° CONNECTOR POSTHARD SURFACE
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F23W.32 32" 3.5" 3.5" 5 $156 Connects 3 panels at 90°.
Includes cable management trim cover.
F23W.39 39" 3.5" 3.5" 5 $162
F23W.47 47" 3.5" 3.5" 6 $174
F23W.53 53" 3.5" 3.5" 7 $184
F23W.62 62" 3.5" 3.5" 8 $200
F23W.67 67" 3.5" 3.5" 8 $202
F23W.85 85" 3.5" 3.5" 9 $230
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F23W-120.32 32" 3.5" 3.5" 5 $156 Connects 3 panels at 120°.
Check for availability.F23W-120.39 39" 3.5" 3.5" 5 $162
F23W-120.47 47" 3.5" 3.5" 6 $174
F23W-120.53 53" 3.5" 3.5" 7 $184
F23W-120.62 62" 3.5" 3.5" 8 $200
F23W-120.67 67" 3.5" 3.5" 8 $202
F23W-120.85 85" 3.5" 3.5" 9 $230
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F24W.32 32" 3.5" 3.5" 5 $196 Connects 4 panels at 90°.
F24W.39 39" 3.5" 3.5" 6 $204
F24W.47 47" 3.5" 3.5" 7 $217
F24W.53 53" 3.5" 3.5" 8 $237
F24W.62 62" 3.5" 3.5" 9 $260
F24W.67 67" 3.5" 3.5" 10 $262
F24W.85 85" 3.5" 3.5" 10 $293
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
PA
NE
L H
AR
DW
AR
E
32
Connectors (cont’d)
FINISHED END
FINISHED END, CHANGE OF HEIGHT
WALL START
WALL STRIP
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2FE.32 32" 3.5" 1" 1 $48 Finishes the vertical end of a panel at the end of a panel run.
Includes cable management trim cover.
F2FE.39 39" 3.5" 1" 2 $48
F2FE.47 47" 3.5" 1" 2 $53
F2FE.53 53" 3.5" 1" 2 $53
F2FE.62 62" 3.5" 1" 2 $53
F2FE.67 67" 3.5" 1" 2 $58
F2FE.85 85" 3.5" 1" 3 $64
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FFECH 48" 1.75" .25" 1 $18 Finishes the exposed end of a panel or connector at a change of height location.
Includes finished end trim and mounting hardware.
May be cut to the appropriate length.
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FWSTA.27 27" 1.75" 1" 1 $48 Connects panel to structural wall or column.
Can also connect equal height panels at a 90° angle at any point along the panel width.
May be field cut to the appropriate length.
Order one additional Draw Rod of the same height.
FWSTA.34 34" 1.75" 1" 2 $51
FWSTA.42 42" 1.75" 1" 3 $51
FWSTA.48 48" 1.75" 1" 3 $51
FWSTA.57 57" 1.75" 1" 3 $53
FWSTA.62 62" 1.75" 1" 3 $53
FWSTA.80 80" 1.75" 1" 4 $58
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FWSST.60 60" — — 3 $58 Attaches to structural wall to hang worksurfaces and/or components.
Includes one wall strip.
Aluminum finish only.
FWSST.72 72" — — 3 $66
FWSST.84 84" — — 4 $66
Friant & Associates | www.friant.com
SYSTEM 2
ELE
CTR
ICA
L D
ISTR
IBU
TIO
N
33
DESCRIPTION
Parts for distributing power through your system. Distributes up to four 20-amp circuits.
NOTES
• 4-circuit
SPECIFICATION OPTIONS
product #: see charts belowpole finish: LG Light Gray, MT Medium Tone, DT Dark Tonebase finish: MT Medium Tone, DT Dark Tone, LG Light Gray
ORDER EXAMPLE
product #: F2CPE4.39pole finish: DTbase finish: DT
Electrical Distribution
BASE POWER ENTRYDIRECT CONNECT,4-CIRCUIT
RECEPTACLE 4-CIRCUIT
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2BPE left angle elbow
— — 5 $276 Connects building power from a wall, floor or column to the base of a panel.
Plugs directly into the panel’s electrical harness at receptacle location.
Distributes up to four 20-amp circuits.
Includes a cable that can be field-cut to the appropriate length.
MUST BE WIRED BY A LICENSED ELECTRICIAN.
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2RECP4.I circuit a 0.25 $28 Locks into panel base power harness.
Provides access to I, II, III, or IIII circuit.
Provides dedicated circuit with “IIII” receptacle.
F2RECP4.II circuit b 0.25 $28
F2RECP4.III circuit c 0.25 $28
F2RECP4.IIII circuit d, dedicated
0.25 $28
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
ELE
CTR
ICA
L D
ISTR
IBU
TIO
N
34
Electrical Distribution (cont’d)
CEILING POWER ENTRYINTERNAL DIRECTCONNECT 4-CIRCUIT
CEILING DATA ENTRYNON-POWERED
PASS-THROUGH FESTOON23” LONG, 4-CIRCUIT
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2CPE4.39 39" 3.5" 3.5" 13 $477 Connects a ceiling electrical supply to the base of a powered panel.
Distributes up to four 20-amp circuits.
Attaches to the end of a panel run, or to a 3 or 4-way 90° connector.
To attach the Power Pole at the end of a panel run, order a Draw Rod separately.
To attach at a:
• 2-Way connection point, order a 3-Way connector
• 3-Way connection point, order a 4-Way connector
Includes a rigid conduit and conduit connector, factory installed power harness, 12’ pole, bezel and end cap trim cover.
Available in LG, MT, DT only.
MUST BE WIRED BY A LICENSED ELECTRICIAN.
F2CPE4.47 47" 3.5" 3.5" 13 $477
F2CPE4.53 53" 3.5" 3.5" 13 $477
F2CPE4.62 62" 3.5" 3.5" 13 $477
F2CPE4.67 67" 3.5" 3.5" 13 $477
F2CPE4.85 85" 3.5" 3.5" 13 $477
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2CDE.39 39" 3.5" 3.5" 8 $212 Routes data/telecommunication cables from the ceiling to the base of a panel.
Attaches to the end of a panel run, to a 3 or 4-Way 90° connector.
To attach the Power Pole at the end of a panel run, order a Draw Rod separately.
To attach at a:
• 2-Way connection point, order a 3-Way connector
• 3-Way connection point, order a 4-Way connector
Includes a 12’ pole, bezel, and end cap
trim cover.
Available in LG, MT, DT only.
F2CDE.47 47" 3.5" 3.5" 8 $212
F2CDE.53 53" 3.5" 3.5" 8 $212
F2CDE.62 62" 3.5" 3.5" 8 $212
F2CDE.67 67" 3.5" 3.5" 8 $212
F2CDE.85 85" 3.5" 3.5" 8 $212
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2CPK.1 23" — — 1 $71 Extends power when connecting power in a straight line through a 3-Way, 4-Way or Post.
Extends power through a 120° or 135° 2 or 3 way connector.
Friant & Associates | www.friant.com
SYSTEM 2
ELE
CTR
ICA
L D
ISTR
IBU
TIO
N
35
DATA PORT PLATE
POWER PANELCONVERSION KIT
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2DPP 2.125" 3.625" 0.250" 0.10 $32 This Data Port plate is used at the base of a panel to connect computers and/or communication equipment.
4 port locations and comes with 1 blank insert.
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2PPCK.24 — 24" — 1 $123 Includes:• Power Retro• Base Cover with Power
Cutouts• Panel to Panel Festoon
Order duplex outlets separately.
Order the 23” Pass-Through Festoon, if you are converting a non electircal panel with any of the following:• 3-Way connection• 4 Way connection
F2PPCK.30 — 30" — 2 $139
F2PPCK.36 — 36" — 2 $161
F2PPCK.42 — 42" — 2 $181
F2PPCK.48 — 48" — 3 $201
F2PPCK.60 — 60" — 5 $241
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2PPCK.12 — 12" — 1 $114 Includes:• Power Retro— Pass Through• Base cover with power
cutouts• Panel to Panel Festoon
Order the 23” Pass-Through Festoon, if you are converting a non electircal panel with any of the following:• 3-Way connection• 4 Way connection
F2PPCK.18 — 18" — 1 $114
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
36
DESCRIPTION
Worksurface hangs from a panel or Wall Strips. It has a laminate top and a PVC edge. There is a 1” gap at the back of the worksurface for plug and cord passage. 54” to 84” worksurfaces have a center support. Includes cantilever brackets, attachment hardware and mending plates for securing front of worksurface to adjacent worksurface
NOTESMending plates are included in rectangular worksurfaces only. Mending plates are for securing front of worksurface to adjacent worksurface. Order mending plates separately if placing corner worksurface next to another corner worksurface without rectangular worksurface return.
When ordering a worksurface spanning a panel and a 3-Way, or two panels with a 3-Way in between the panels, you will need to:• add 3.5” to the length of the worksurface• add “-3W” to the part number• add $80 to the list price
example:Two 30”W Frames with one 3-Way Connector equals to 63.5”. In this case, order FSERWS.2460L-3W. ($414 + $80 = $494)
SPECIFICATION OPTIONS
product #: see charts belowtop, edge finish: see page 5support finish: LG Light Gray, MT Medium Tone, DT Dark Toneworksurface finish: see page 5mending plate: FASS22-0-ZN-LIST $3
ORDER EXAMPLE
product #: FSERWS.2424Ltop, edge finish: LGsupport finish: DTworksurface finish: 7909-60 Light Maple
Rectangular Worksurface
24" D WORKSURFACES PART # HEIGHT A B C D WT. (LBS) PRICE
FSERWS.2424L 1.25" 24" 24" — — 30 $210
FSERWS.2430L 1.25" 30" 24" — — 36 $247
FSERWS.2436L 1.25" 36" 24" — — 41 $253
FSERWS.2442L 1.25" 42" 24" — — 47 $325
FSERWS.2448L 1.25" 48" 24" — — 53 $333
FSERWS.2454L 1.25" 54" 24" — — 58 $389
FSERWS.2460L 1.25" 60" 24" — — 64 $414
FSERWS.2466L 1.25" 66" 24" — — 70 $471
FSERWS.2472L 1.25" 72" 24" — — 76 $480
FSERWS.2478L 1.25" 78" 24" — — 81 $582
FSERWS.2484L 1.25" 84" 24" — — 87 $585
Friant & Associates | www.friant.com
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
37
30" D WORKSURFACES PART # HEIGHT A B C D WT. (LBS) PRICE
FSERWS.3024L 1.25" 24" 30" — — 38 $276
FSERWS.3030L 1.25" 30" 30" — — 45 $325
FSERWS.3036L 1.25" 36" 30" — — 53 $332
FSERWS.3042L 1.25" 42" 30" — — 60 $417
FSERWS.3048L 1.25" 48" 30" — — 66 $424
FSERWS.3054L 1.25" 54" 30" — — 74 $493
FSERWS.3060L 1.25" 60" 30" — — 81 $518
FSERWS.3066L 1.25" 66" 30" — — 88 $589
FSERWS.3072L 1.25" 72" 30" — — 95 $599
FSERWS.3078L 1.25" 78" 30" — — 103 $725
FSERWS.3084L 1.25" 84" 30" — — 111 $728
Rectangular Worksurface (cont’d)
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
38
DESCRIPTION
Worksurface hangs from a panel or Wall Strips. It has a laminate top and a PVC edge. There is a 1” gap at the back of the worksurface for plug and cord passage. It has 24” D or 30” D connecting sides. Includes cantilever brackets, and attachment hardware.
NOTES
• Includes one wire grommet, cantilever brackets, one corner bracket, and attachment hardware.
• Mending plates are included with rectangular worksurfaces only.
• Order mending plates separately if placing corner worksurface next to another corner worksurface without rectangular worksurface return.
SPECIFICATION OPTIONS
product #: see charts belowtop, edge finish: see page 5support finish: LG Light Gray, MT Medium Tone, DT Dark Toneworksurface finish: see page 5mending plate: FASS22-0-ZN-LIST $3
ORDER EXAMPLE
product #: FSECWS.2436Ltop, edge finish: LGsupport finish: DTworksurface finish: 7909-60 Light Maple
90° NOTCHED CORNER
90° CURVED CORNER
PART # HEIGHT A B C D WT. (LBS) PRICE NOTES
FSECWS.2436L 1.25" 36" 24" — — 53 $445 Corners are angled (not available with notched front edge)FSECWS.2442L 1.25" 42" 24" — — 72 $562
FSECWS.2448L 1.25" 48" 24" — — 83 $585
FSECWS.3036L 1.25" 36" 30" — — 60 $481
FSECWS.3042L 1.25" 42" 30" — — 74 $598
FSECWS.3048L 1.25" 48" 30" — — 85 $621
PART # HEIGHT A B C D WT. (LBS) PRICE
FSECCWS.2436L 1.25" 36" 24" — — 54 $445
FSECCWS.2442L 1.25" 42" 24" — — 68 $562
FSECCWS.2448L 1.25" 48" 24" — — 72 $585
FSECCWS.3036L 1.25" 36" 30" — — 60 $481
FSECCWS.3042L 1.25" 42" 30" — — 76 $598
FSECCWS.3048L 1.25" 48" 30" — — 78 $621
90° Notched and Curved Corner
*
**
*
Friant & Associates | www.friant.com
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
39
DESCRIPTION
This Half Circle Worksurface has a notch, and attaches to the end of two back to back Rectangular or Extended Corner Worksurfaces, and includes one Support Column Leg. It has a laminate top and a PVC edge.
NOTES
• Support Column Leg has a leveling glide and attaching hardware.
• Ships knocked down.• Column leg finish: DT Dark Tone
SPECIFICATION OPTIONS
product #: see charts belowtop, edge finish: see page 5support finish: LG Light Gray, MT Medium Tone, DT Dark Toneworksurface finish: see page 5
ORDER EXAMPLE
product #: FSEHCWS.50Ltop, edge finish: LGsupport finish: DTworksurface finish: 7040A-60 Mahogany
SQUARE EDGE HALFCIRCLE
PART # HEIGHT A B C D WT. (LBS) PRICE
FSEHCWS.50L 29" 52" 26" — — 55 $657
FSEHCWS.60L 29" 64" 32" — — 67 $742
Square Edge Half Circle
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
40
DESCRIPTION
Worksurface hangs from a panel or Wall Strips. It has a laminate top and a PVC edge. There is a 1” gap at the back of the worksurface for plug and cord passage. Includes one Support Column Leg.
NOTES
• Support Column Leg has a leveling glide and attaching hardware.
• Ships knocked down.• Column leg finish: DT Dark Tone
SPECIFICATION OPTIONS
product #: see charts belowtop, edge finish: see page 5support finish: LG Light Gray, MT Medium Tone, DT Dark Toneworksurface finish: see page 5
ORDER EXAMPLE
product #: FSEDSP2448Ltop, edge finish: LGsupport finish: DTworksurface finish: 7040A-60 Mahogany
SQUARE EDGE HALFCIRCLE
PART # HEIGHT A B C D WT. (LBS) PRICE
FSEDSP.2448L 29" 48" 24" — — 62 $450
FSEDSP.3048L 29" 48" 30" — — 72 $506
FSEDSP.2460L 29" 60" 24" — — 73 $513
FSEDSP.3060L 29" 60" 30" — — 87 $573
FSEDSP.3072L 29" 72" 30" — — 101 $641
FSEDSP.3672L 29" 72" 36" — — 117 $720
Square Edge D-Shaped
Friant & Associates | www.friant.com
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
41
Right Extended shown
DESCRIPTION
Worksurface hangs from a panel or Wall Strips. It has a laminate top and a PVC edge. There is a 1” gap at the back of the worksurface for plug and cord passage. 54” to 84” worksurfaces have a center support.
NOTES
• Includes one wire grommet, cantilever brackets, and one corner bracket
• Specify L for left extended, and R for right extended.
• When ordering a worksurface spanning a panel and a 3-Way or two panels with a 3-Way in between the panels, you will need to:
• add 3.5” to the length of the worksurface• add “-3W” to the part number• add $80 to the list price example: Two 30” Frames with one 3-Way Connector equals to 63.5”. In this case, order FSENCWS.24366024L-3W ($563 + $80 = $643)• Mending plates are included with
rectangular worksurfaces only.• Order mending plates separately if placing
corner worksurface next to another corner worksurface without rectangular worksurface return
SPECIFICATION OPTIONS
product #: see charts belowtop, edge finish: see page 5support finish: LG Light Gray, MT Medium Tone, DT Dark Toneworksurface finish: see page 5left or right extended: L for Left, R for Right
ORDER EXAMPLE
product #: FSENCWS.24366024Rtop, edge finish: LGsupport finish: DTworksurface finish: 7040A-60 Mahoganyleft or right extended: R
24” D CONNECTING SIDE24” D EXTENSION36” D
PART # HEIGHT A B C D WT. (LBS) PRICE
FSENCWS.24366024L 1.25" 24" 36" 60" 24" 74 $563
FSENCWS.24366024R 1.25" 24" 36" 60" 24" 74 $563
FSENCWS.24366624L 1.25" 24" 36" 66" 24" 81 $640
FSENCWS.24366624R 1.25" 24" 36" 66" 24" 81 $640
FSENCWS.24367224L 1.25" 24" 36" 72" 24" 87 $648
FSENCWS.24367224R 1.25" 24" 36" 72" 24" 87 $648
FSENCWS.24367824L 1.25" 24" 36" 78" 24" 93 $799
FSENCWS.24367824R 1.25" 24" 36" 78" 24" 93 $799
FSENCWS.24368424L 1.25" 24" 36" 84" 24" 99 $806
FSENCWS.24368424R 1.25" 24" 36" 84" 24" 99 $806
90° Extended Notched Corner
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
42
30” D CONNECTING SIDE30” D EXTENSION36” D
24” D CONNECTING SIDE24” D EXTENSION42” D
30” D CONNECTING SIDE30” D EXTENSION42” D
PART # HEIGHT A B C D WT. (LBS) PRICE
FSENCWS.30366030L 1.25" 30" 36" 60" 30" 88 $602
FSENCWS.30366030R 1.25" 30" 36" 60" 30" 88 $602
FSENCWS.30366630L 1.25" 30" 36" 66" 30" 95 $679
FSENCWS.30366630R 1.25" 30" 36" 66" 30" 95 $679
FSENCWS.30367230L 1.25" 30" 36" 72" 30" 102 $687
FSENCWS.30367230R 1.25" 30" 36" 72" 30" 102 $687
FSENCWS.30367830L 1.25" 30" 36" 78" 30" 110 $838
FSENCWS.30367830R 1.25" 30" 36" 78" 30" 110 $838
FSENCWS.30368430L 1.25" 30" 36" 84" 30" 117 $845
FSENCWS.30368430R 1.25" 30" 36" 84" 30" 117 $845
PART # HEIGHT A B C D WT. (LBS) PRICE
FSENCWS.24426024L 1.25" 24" 42" 60" 24" 84 $696
FSENCWS.24426024R 1.25" 24" 42" 60" 24" 84 $696
FSENCWS.24426624L 1.25" 24" 42" 66" 24" 91 $798
FSENCWS.24426624R 1.25" 24" 42" 66" 24" 91 $798
FSENCWS.24427224L 1.25" 24" 42" 72" 24" 97 $806
FSENCWS.24427224R 1.25" 24" 42" 72" 24" 97 $806
FSENCWS.24427824L 1.25" 24" 42" 78" 24" 103 $1,005
FSENCWS.24427824R 1.25" 24" 42" 78" 24" 103 $1,005
FSENCWS.24428424L 1.25" 24" 42" 84" 24" 109 $1,013
FSENCWS.24428424R 1.25" 24" 42" 84" 24" 109 $1,013
PART # HEIGHT A B C D WT. (LBS) PRICE
FSENCWS.30426030L 1.25" 30" 42" 60" 30" 98 $736
FSENCWS.30426030R 1.25" 30" 42" 60" 30" 98 $736
FSENCWS.30426630L 1.25" 30" 42" 66" 30" 106 $837
FSENCWS.30426630R 1.25" 30" 42" 66" 30" 106 $837
FSENCWS.30427230L 1.25" 30" 42" 72" 30" 112 $845
FSENCWS.30427230R 1.25" 30" 42" 72" 30" 112 $845
FSENCWS.30427830L 1.25" 30" 42" 78" 30" 122 $1,044
FSENCWS.30427830R 1.25" 30" 42" 78" 30" 122 $1,044
FSENCWS.30428430L 1.25" 30" 42" 84" 30" 127 $1,053
FSENCWS.30428430R 1.25" 30" 42" 84" 30" 127 $1,053
Friant & Associates | www.friant.com
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
43
90° Extended Notched Corner Worksurface (cont’d)
24” D CONNECTING SIDE24” D EXTENSION48” D
30” D CONNECTING SIDE30” D EXTENSION48” D
PART # HEIGHT A B C D WT. (LBS) PRICE
FSENCWS.24486024L 1.25" 24" 48" 60" 24" 93 $704
FSENCWS.24486024R 1.25" 24" 48" 60" 24" 93 $704
FSENCWS.24486624L 1.25" 24" 48" 66" 24" 99 $806
FSENCWS.24486624R 1.25" 24" 48" 66" 24" 99 $806
FSENCWS.24487224L 1.25" 24" 48" 72" 24" 104 $819
FSENCWS.24487224R 1.25" 24" 48" 72" 24" 104 $819
FSENCWS.24487824L 1.25" 24" 48" 78" 24" 110 $1,025
FSENCWS.24487824R 1.25" 24" 48" 78" 24" 110 $1,025
FSENCWS.24488424L 1.25" 24" 48" 84" 24" 116 $1,028
FSENCWS.24488424R 1.25" 24" 48" 84" 24" 116 $1,028
PART # HEIGHT A B C D WT. (LBS) PRICE
FSENCWS.30486030L 1.25" 30" 48" 60" 30" 108 $743
FSENCWS.30486030R 1.25" 30" 48" 60" 30" 108 $743
FSENCWS.30486630L 1.25" 30" 48" 66" 30" 116 $845
FSENCWS.30486630R 1.25" 30" 48" 66" 30" 116 $845
FSENCWS.30487230L 1.25" 30" 48" 72" 30" 123 $859
FSENCWS.30487230R 1.25" 30" 48" 72" 30" 123 $859
FSENCWS.30487830L 1.25" 30" 48" 78" 30" 134 $1,064
FSENCWS.30487830R 1.25" 30" 48" 78" 30" 134 $1,064
FSENCWS.30488430L 1.25" 30" 48" 84" 30" 146 $1,067
FSENCWS.30488430R 1.25" 30" 48" 84" 30" 146 $1,067
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
44
DESCRIPTION
Worksurface hangs from a panel or Wall Strips. It has a laminate top and a PVC edge. There is a 1” gap at the back of the worksurface for plug and cord passage. 60” to 84” worksurfaces have a center support.
NOTES
• Includes one wire grommet, cantilever brackets, one corner bracket, and attachment hardware.
• Specify L for left extended, and R for right extended.
• When ordering a worksurface spanning a panel and a 3-Way, or two panels with a 3-Way in between the panels, you will need to:
• add 3.5” to the length of the worksurface• add “-3W” to the part number• add $80 to the list price example: Two 30” Frames with one 3-Way Connector equals to 63.5”. In this case, order FSENCWS.24366024L-3W ($563 + $80 = $643)• Mending plates are included with
rectangular worksurfaces only.• Order mending plates separately if
placing corner worksurface next to another corner worksurface without rectangular worksurface return
SPECIFICATION OPTIONS
product #: see charts belowtop, edge finish: see page 5support finish: LG Light Gray, MT Medium Tone, DT Dark Toneworksurface finish: see page 5left or right extended: L for Left, R for Right
ORDER EXAMPLE
product #: FSECCWS.24366024Rtop, edge finish: LGsupport finish: DTworksurface finish: 7040A-60 Mahoganyleft or right extended: R
24” D CONNECTING SIDE24” D EXTENSION36” D
PART # HEIGHT A B C D WT. (LBS) PRICE
FSECCWS.24366024L 1.25" 24" 36" 60" 24" 76 $563
FSECCWS.24366024R 1.25" 24" 36" 60" 24" 76 $563
FSECCWS.24366624L 1.25" 24" 36" 66" 24" 82 $640
FSECCWS.24366624R 1.25" 24" 36" 66" 24" 82 $640
FSECCWS.24367224L 1.25" 24" 36" 72" 24" 88 $648
FSECCWS.24367224R 1.25" 24" 36" 72" 24" 88 $648
FSECCWS.24367824L 1.25" 24" 36" 78" 24" 94 $799
FSECCWS.24367824R 1.25" 24" 36" 78" 24" 94 $799
FSECCWS.24368424L 1.25" 24" 36" 84" 24" 100 $806
FSECCWS.24368424R 1.25" 24" 36" 84" 24" 100 $806
90° Extended Curved Corner
Right Extended shown
Friant & Associates | www.friant.com
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
45
30” D CONNECTING SIDE30” D EXTENSION36” D
24” D CONNECTING SIDE24” D EXTENSION42” D
30” D CONNECTING SIDE30” D EXTENSION42” D
PART # HEIGHT A B C D WT. (LBS) PRICE
FSECCWS.30366030L 1.25" 30" 36" 60" 30" 87 $602
FSECCWS.30366030R 1.25" 30" 36" 60" 30" 87 $602
FSECCWS.30366630L 1.25" 30" 36" 66" 30" 95 $679
FSECCWS.30366630R 1.25" 30" 36" 66" 30" 95 $679
FSECCWS.30367230L 1.25" 30" 36" 72" 30" 102 $687
FSECCWS.30367230R 1.25" 30" 36" 72" 30" 102 $687
FSECCWS.30367830L 1.25" 30" 36" 78" 30" 110 $838
FSECCWS.30367830R 1.25" 30" 36" 78" 30" 110 $838
FSECCWS.30368430L 1.25" 30" 36" 84" 30" 117 $845
FSECCWS.30368430R 1.25" 30" 36" 84" 30" 117 $845
PART # HEIGHT A B C D WT. (LBS) PRICE
FSECCWS.24426024L 1.25" 24" 42" 60" 24" 83 $696
FSECCWS.24426024R 1.25" 24" 42" 60" 24" 83 $696
FSECCWS.24426624L 1.25" 24" 42" 66" 24" 89 $798
FSECCWS.24426624R 1.25" 24" 42" 66" 24" 89 $798
FSECCWS.24427224L 1.25" 24" 42" 72" 24" 95 $806
FSECCWS.24427224R 1.25" 24" 42" 72" 24" 95 $806
FSECCWS.24427824L 1.25" 24" 42" 78" 24" 101 $1,005
FSECCWS.24427824R 1.25" 24" 42" 78" 24" 101 $1,005
FSECCWS.24428424L 1.25" 24" 42" 84" 24" 106 $1,013
FSECCWS.24428424R 1.25" 24" 42" 84" 24" 106 $1,013
PART # HEIGHT A B C D WT. (LBS) PRICE
FSECCWS.30426030L 1.25" 30" 42" 60" 30" 95 $736
FSECCWS.30426030R 1.25" 30" 42" 60" 30" 95 $736
FSECCWS.30426630L 1.25" 30" 42" 66" 30" 103 $837
FSECCWS.30426630R 1.25" 30" 42" 66" 30" 103 $837
FSECCWS.30427230L 1.25" 30" 42" 72" 30" 110 $845
FSECCWS.30427230R 1.25" 30" 42" 72" 30" 110 $845
FSECCWS.30427830L 1.25" 30" 42" 78" 30" 118 $1,044
FSECCWS.30427830R 1.25" 30" 42" 78" 30" 118 $1,044
FSECCWS.30428430L 1.25" 30" 42" 84" 30" 125 $1,053
FSECCWS.30428430R 1.25" 30" 42" 84" 30" 125 $1,053
90° Extended Curved Corner Worksurface (cont’d)
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
46
24” D CONNECTING SIDE24” D EXTENSION48” D
30” D CONNECTING SIDE30” D EXTENSION48” D
PART # HEIGHT A B C D WT. (LBS) PRICE
FSECCWS.24486024L 1.25" 24" 48" 60" 24" 89 $704
FSECCWS.24486024R 1.25" 24" 48" 60" 24" 89 $704
FSECCWS.24486624L 1.25" 24" 48" 66" 24" 95 $806
FSECCWS.24486624R 1.25" 24" 48" 66" 24" 95 $806
FSECCWS.24487224L 1.25" 24" 48" 72" 24" 101 $819
FSECCWS.24487224R 1.25" 24" 48" 72" 24" 101 $819
FSECCWS.24487824L 1.25" 24" 48" 78" 24" 107 $1,025
FSECCWS.24487824R 1.25" 24" 48" 78" 24" 107 $1,025
FSECCWS.24488424L 1.25" 24" 48" 84" 24" 112 $1,028
FSECCWS.24488424R 1.25" 24" 48" 84" 24" 112 $1,028
PART # HEIGHT A B C D WT. (LBS) PRICE
FSECCWS.30486030L 1.25" 30" 48" 60" 30" 104 $743
FSECCWS.30486030R 1.25" 30" 48" 60" 30" 104 $743
FSECCWS.30486630L 1.25" 30" 48" 66" 30" 112 $845
FSECCWS.30486630R 1.25" 30" 48" 66" 30" 112 $845
FSECCWS.30487230L 1.25" 30" 48" 72" 30" 119 $859
FSECCWS.30487230R 1.25" 30" 48" 72" 30" 119 $859
FSECCWS.30487830L 1.25" 30" 48" 78" 30" 126 $1,064
FSECCWS.30487830R 1.25" 30" 48" 78" 30" 126 $1,064
FSECCWS.30488430L 1.25" 30" 48" 84" 30" 133 $1,067
FSECCWS.30488430R 1.25" 30" 48" 84" 30" 133 $1,067
Friant & Associates | www.friant.com
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
47
DESCRIPTION
Worksurface hangs from a panel or Wall Strips. It has a laminate top and a PVC edge. There is a 1” gap at the back of the worksurface for plug and cord passage. 54” to 84” worksurfaces have a support center.
NOTES
• Includes one wire grommet, cantilever brackets, one corner bracket.
• Specify L for left extended, and R for right extended.
• Includes one Support Column Leg.• Column Leg Finish: DT Dark Tone.• Order mending plates separately if
placing corner worksurface next to another corner worksurface without rectangular worksurface return.
SPECIFICATION OPTIONS
product #: see charts belowtop, edge finish: see page 5support finish: LG Light Gray, MT Medium Tone, DT Dark Toneworksurface finish: see page 5mending plate: FASS22-0-ZN-LIST $3left or right extended: L for Left, R for Right
ORDER EXAMPLE
product #: FSENCPWS.24366024Rtop, edge finish: LGsupport finish: DTworksurface finish: 7040A-60 Mahoganyleft or right extended: R
24” D CONNECTING SIDE24” D EXTENSION36” D
PART # HEIGHT A B C D WT. (LBS) PRICE
FSENCPWS.24366024L 1.25" 24" 36" 60" 24" 89 $719
FSENCPWS.24366024R 1.25" 24" 36" 60" 24" 89 $719
FSENCPWS.24366624L 1.25" 24" 36" 66" 24" 95 $803
FSENCPWS.24366624R 1.25" 24" 36" 66" 24" 95 $803
FSENCPWS.24367224L 1.25" 24" 36" 72" 24" 101 $817
FSENCPWS.24367224R 1.25" 24" 36" 72" 24" 101 $817
FSENCPWS.24367824L 1.25" 24" 36" 78" 24" 107 $978
FSENCPWS.24367824R 1.25" 24" 36" 78" 24" 107 $978
FSENCPWS.24368424L 1.25" 24" 36" 84" 24" 112 $993
FSENCPWS.24368424R 1.25" 24" 36" 84" 24" 112 $993
90° Extended Notched Corner Peninsula
Right Extended shown
24” D CONNECTING SIDE24” D EXTENSION42” D
PART # HEIGHT A B C D WT. (LBS) PRICE
FSENCPWS.24426024L 1.25" 24" 42" 60" 24" 97 $845
FSENCPWS.24426024R 1.25" 24" 42" 60" 24" 97 $845
FSENCPWS.24426624L 1.25" 24" 42" 66" 24" 103 $954
FSENCPWS.24426624R 1.25" 24" 42" 66" 24" 103 $954
FSENCPWS.24427224L 1.25" 24" 42" 72" 24" 109 $968
FSENCPWS.24427224R 1.25" 24" 42" 72" 24" 109 $968
FSENCPWS.24427824L 1.25" 24" 42" 78" 24" 114 $1,202
FSENCPWS.24427824R 1.25" 24" 42" 78" 24" 114 $1,202
FSENCPWS.24428424L 1.25" 24" 42" 84" 24" 120 $1,206
FSENCPWS.24428424R 1.25" 24" 42" 84" 24" 120 $1,206
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
48
24” D CONNECTING SIDE24” D EXTENSION48” D
24” D CONNECTING SIDE30” D EXTENSION36” D
PART # HEIGHT A B C D WT. (LBS) PRICE
FSENCPWS.24486024L 1.25" 24" 48" 60" 24" 104 $848
FSENCPWS.24486024R 1.25" 24" 48" 60" 24" 104 $848
FSENCPWS.24486624L 1.25" 24" 48" 66" 24" 110 $958
FSENCPWS.24486624R 1.25" 24" 48" 66" 24" 110 $958
FSENCPWS.24487224L 1.25" 24" 48" 72" 24" 116 $971
FSENCPWS.24487224R 1.25" 24" 48" 72" 24" 116 $971
FSENCPWS.24487824L 1.25" 24" 48" 78" 24" 121 $1,206
FSENCPWS.24487824R 1.25" 24" 48" 78" 24" 121 $1,206
FSENCPWS.24488424L 1.25" 24" 48" 84" 24" 127 $1,209
FSENCPWS.24488424R 1.25" 24" 48" 84" 24" 127 $1,209
PART # HEIGHT A B C D WT. (LBS) PRICE
FSENCPWS.24366030L 1.25" 24" 36" 60" 30" 94 $719
FSENCPWS.24366030R 1.25" 24" 36" 60" 30" 94 $719
FSENCPWS.24366630L 1.25" 24" 36" 66" 30" 102 $803
FSENCPWS.24366630R 1.25" 24" 36" 66" 30" 102 $803
FSENCPWS.24367230L 1.25" 24" 36" 72" 30" 109 $817
FSENCPWS.24367230R 1.25" 24" 36" 72" 30" 109 $817
FSENCPWS.24367830L 1.25" 24" 36" 78" 30" 116 $978
FSENCPWS.24367830R 1.25" 24" 36" 78" 30" 116 $978
FSENCPWS.24368430L 1.25" 24" 36" 84" 30" 123 $993
FSENCPWS.24368430R 1.25" 24" 36" 84" 30" 123 $993
Friant & Associates | www.friant.com
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
49
90° Extended Notched Corner Peninsula (cont’d)
24” D CONNECTING SIDE30” D EXTENSION42” D
24” D CONNECTING SIDE30” D EXTENSION48” D
30” D CONNECTING SIDE30” D EXTENSION36” D
PART # HEIGHT A B C D WT. (LBS) PRICE
FSENCPWS.24426030L 1.25" 24" 42" 60" 30" 102 $845
FSENCPWS.24426030R 1.25" 24" 42" 60" 30" 102 $845
FSENCPWS.24426630L 1.25" 24" 42" 66" 30" 110 $954
FSENCPWS.24426630R 1.25" 24" 42" 66" 30" 110 $954
FSENCPWS.24427230L 1.25" 24" 42" 72" 30" 117 $968
FSENCPWS.24427230R 1.25" 24" 42" 72" 30" 117 $968
FSENCPWS.24427830L 1.25" 24" 42" 78" 30" 124 $1,202
FSENCPWS.24427830R 1.25" 24" 42" 78" 30" 124 $1,202
FSENCPWS.24428430L 1.25" 24" 42" 84" 30" 131 $1,206
FSENCPWS.24428430R 1.25" 24" 42" 84" 30" 131 $1,206
PART # HEIGHT A B C D WT. (LBS) PRICE
FSENCPWS.24486030L 1.25" 24" 48" 60" 30" 111 $848
FSENCPWS.24486030R 1.25" 24" 48" 60" 30" 111 $848
FSENCPWS.24486630L 1.25" 24" 48" 66" 30" 119 $958
FSENCPWS.24486630R 1.25" 24" 48" 66" 30" 119 $958
FSENCPWS.24487230L 1.25" 24" 48" 72" 30" 126 $971
FSENCPWS.24487230R 1.25" 24" 48" 72" 30" 126 $971
FSENCPWS.24487830L 1.25" 24" 48" 78" 30" 133 $1,206
FSENCPWS.24487830R 1.25" 24" 48" 78" 30" 133 $1,206
FSENCPWS.24488430L 1.25" 24" 48" 84" 30" 140 $1,209
FSENCPWS.24488430R 1.25" 24" 48" 84" 30" 140 $1,209
PART # HEIGHT A B C D WT. (LBS) PRICE
FSENCPWS.30366030L 1.25" 30" 36" 60" 30" 95 $758
FSENCPWS.30366030R 1.25" 30" 36" 60" 30" 95 $758
FSENCPWS.30366630L 1.25" 30" 36" 66" 30" 103 $843
FSENCPWS.30366630R 1.25" 30" 36" 66" 30" 103 $843
FSENCPWS.30367230L 1.25" 30" 36" 72" 30" 110 $856
FSENCPWS.30367230R 1.25" 30" 36" 72" 30" 110 $856
FSENCPWS.30367830L 1.25" 30" 36" 78" 30" 118 $1,018
FSENCPWS.30367830R 1.25" 30" 36" 78" 30" 118 $1,018
FSENCPWS.30368430L 1.25" 30" 36" 84" 30" 125 $1,032
FSENCPWS.30368430R 1.25" 30" 36" 84" 30" 125 $1,032
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
50
30” D CONNECTING SIDE30” D EXTENSION42” D
30” D CONNECTING SIDE30” D EXTENSION48” D
PART # HEIGHT A B C D WT. (LBS) PRICE
FSENCPWS.30426030L 1.25" 30" 42" 60" 30" 106 $884
FSENCPWS.30426030R 1.25" 30" 42" 60" 30" 106 $884
FSENCPWS.30426630L 1.25" 30" 42" 66" 30" 114 $993
FSENCPWS.30426630R 1.25" 30" 42" 66" 30" 114 $993
FSENCPWS.30427230L 1.25" 30" 42" 72" 30" 121 $1,007
FSENCPWS.30427230R 1.25" 30" 42" 72" 30" 121 $1,007
FSENCPWS.30427830L 1.25" 30" 42" 78" 30" 128 $1,217
FSENCPWS.30427830R 1.25" 30" 42" 78" 30" 128 $1,217
FSENCPWS.30428430L 1.25" 30" 42" 84" 30" 135 $1,232
FSENCPWS.30428430R 1.25" 30" 42" 84" 30" 135 $1,232
PART # HEIGHT A B C D WT. (LBS) PRICE
FSENCPWS.30486030L 1.25" 30" 48" 60" 30" 116 $887
FSENCPWS.30486030R 1.25" 30" 48" 60" 30" 116 $887
FSENCPWS.30486630L 1.25" 30" 48" 66" 30" 124 $997
FSENCPWS.30486630R 1.25" 30" 48" 66" 30" 124 $997
FSENCPWS.30487230L 1.25" 30" 48" 72" 30" 131 $1,010
FSENCPWS.30487230R 1.25" 30" 48" 72" 30" 131 $1,010
FSENCPWS.30487830L 1.25" 30" 48" 78" 30" 138 $1,220
FSENCPWS.30487830R 1.25" 30" 48" 78" 30" 138 $1,220
FSENCPWS.30488430L 1.25" 30" 48" 84" 30" 144 $1,236
FSENCPWS.30488430R 1.25" 30" 48" 84" 30" 144 $1,236
Friant & Associates | www.friant.com
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
51
DESCRIPTION
Worksurface hangs from a panel or Wall Strips. It has a laminate top and a PVC edge. There is a 1” gap at the back of the worksurface for plug and cord passage.
NOTES
• Includes one wire grommet, cantilever brackets, one corner bracket, and attachment hardware.
• Specify L for left extended, and R for right extended.
• Includes one Support Column Leg.• Column Leg Finish: DT Dark Tone.
SPECIFICATION OPTIONS
product #: see charts belowtop, edge finish: see page 5support finish: LG Light Gray, MT Medium Tone, DT Dark Toneworksurface finish: page 5left or right extended: L for Left, R for Right
ORDER EXAMPLE
product #: FSECCPWS.24366024Ltop, edge finish: LGsupport finish: DTworksurface finish: 7040A-60 Mahoganyleft or right extended: L
24” D CONNECTING SIDE24” D EXTENSION36” D
PART # HEIGHT A B C D WT. (LBS) PRICE
FSECCPWS.24366024L 1.25" 24" 36" 60" 24" 87 $719
FSECCPWS.24366024R 1.25" 24" 36" 60" 24" 87 $719
FSECCPWS.24366624L 1.25" 24" 36" 66" 24" 93 $803
FSECCPWS.24366624R 1.25" 24" 36" 66" 24" 93 $803
FSECCPWS.24367224L 1.25" 24" 36" 72" 24" 99 $817
FSECCPWS.24367224R 1.25" 24" 36" 72" 24" 99 $817
FSECCPWS.24367824L 1.25" 24" 36" 78" 24" 105 $978
FSECCPWS.24367824R 1.25" 24" 36" 78" 24" 105 $978
FSECCPWS.24368424L 1.25" 24" 36" 84" 24" 110 $993
FSECCPWS.24368424R 1.25" 24" 36" 84" 24" 110 $993
Extended Curved Corner Peninsula
Right Extended shown
24” D CONNECTING SIDE24” D EXTENSION42” D
PART # HEIGHT A B C D WT. (LBS) PRICE
FSECCPWS.24426024L 1.25" 24" 42" 60" 24" 94 $845
FSECCPWS.24426024R 1.25" 24" 42" 60" 24" 94 $845
FSECCPWS.24426624L 1.25" 24" 42" 66" 24" 100 $954
FSECCPWS.24426624R 1.25" 24" 42" 66" 24" 100 $954
FSECCPWS.24427224L 1.25" 24" 42" 72" 24" 106 $968
FSECCPWS.24427224R 1.25" 24" 42" 72" 24" 106 $968
FSECCPWS.24427824L 1.25" 24" 42" 78" 24" 111 $1,202
FSECCPWS.24427824R 1.25" 24" 42" 78" 24" 111 $1,202
FSECCPWS.24428424L 1.25" 24" 42" 84" 24" 116 $1,206
FSECCPWS.24428424R 1.25" 24" 42" 84" 24" 116 $1,206
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
52
24” D CONNECTING SIDE24” D EXTENSION48” D
24” D CONNECTING SIDE30” D EXTENSION36” D
PART # HEIGHT A B C D WT. (LBS) PRICE
FSECCPWS.24486024L 1.25" 24" 48" 60" 24" 101 $848
FSECCPWS.24486024R 1.25" 24" 48" 60" 24" 101 $848
FSECCPWS.24486624L 1.25" 24" 48" 66" 24" 107 $958
FSECCPWS.24486624R 1.25" 24" 48" 66" 24" 107 $958
FSECCPWS.24487224L 1.25" 24" 48" 72" 24" 112 $971
FSECCPWS.24487224R 1.25" 24" 48" 72" 24" 112 $971
FSECCPWS.24487824L 1.25" 24" 48" 78" 24" 118 $1,206
FSECCPWS.24487824R 1.25" 24" 48" 78" 24" 118 $1,206
FSECCPWS.24488424L 1.25" 24" 48" 84" 24" 124 $1,209
FSECCPWS.24488424R 1.25" 24" 48" 84" 24" 124 $1,209
PART # HEIGHT A B C D WT. (LBS) PRICE
FSECCPWS.24366030L 1.25" 24" 36" 60" 30" 94 $719
FSECCPWS.24366030R 1.25" 24" 36" 60" 30" 94 $719
FSECCPWS.24366630L 1.25" 24" 36" 66" 30" 101 $803
FSECCPWS.24366630R 1.25" 24" 36" 66" 30" 101 $803
FSECCPWS.24367230L 1.25" 24" 36" 72" 30" 108 $817
FSECCPWS.24367230R 1.25" 24" 36" 72" 30" 108 $817
FSECCPWS.24367830L 1.25" 24" 36" 78" 30" 115 $978
FSECCPWS.24367830R 1.25" 24" 36" 78" 30" 115 $978
FSECCPWS.24368430L 1.25" 24" 36" 84" 30" 123 $993
FSECCPWS.24368430R 1.25" 24" 36" 84" 30" 123 $993
Friant & Associates | www.friant.com
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
53
Extended Curved Corner Peninsula (cont’d)
24” D CONNECTING SIDE30” D EXTENSION42” D
24” D CONNECTING SIDE30” D EXTENSION48” D
30” D CONNECTING SIDE30” D EXTENSION36” D
PART # HEIGHT A B C D WT. (LBS) PRICE
FSECCPWS.24426030L 1.25" 24" 42" 60" 30" 100 $845
FSECCPWS.24426030R 1.25" 24" 42" 60" 30" 100 $845
FSECCPWS.24426630L 1.25" 24" 42" 66" 30" 107 $954
FSECCPWS.24426630R 1.25" 24" 42" 66" 30" 107 $954
FSECCPWS.24427230L 1.25" 24" 42" 72" 30" 113 $968
FSECCPWS.24427230R 1.25" 24" 42" 72" 30" 113 $968
FSECCPWS.24427830L 1.25" 24" 42" 78" 30" 120 $1,202
FSECCPWS.24427830R 1.25" 24" 42" 78" 30" 120 $1,202
FSECCPWS.24428430L 1.25" 24" 42" 84" 30" 126 $1,206
FSECCPWS.24428430R 1.25" 24" 42" 84" 30" 126 $1,206
PART # HEIGHT A B C D WT. (LBS) PRICE
FSECCPWS.24486030L 1.25" 24" 48" 60" 30" 107 $848
FSECCPWS.24486030R 1.25" 24" 48" 60" 30" 107 $848
FSECCPWS.24486630L 1.25" 24" 48" 66" 30" 113 $958
FSECCPWS.24486630R 1.25" 24" 48" 66" 30" 113 $958
FSECCPWS.24487230L 1.25" 24" 48" 72" 30" 118 $971
FSECCPWS.24487230R 1.25" 24" 48" 72" 30" 118 $971
FSECCPWS.24487830L 1.25" 24" 48" 78" 30" 124 $1,206
FSECCPWS.24487830R 1.25" 24" 48" 78" 30" 124 $1,206
FSECCPWS.24488430L 1.25" 24" 48" 84" 30" 129 $1,209
FSECCPWS.24488430R 1.25" 24" 48" 84" 30" 129 $1,209
PART # HEIGHT A B C D WT. (LBS) PRICE
FSECCPWS.30366030L 1.25" 30" 36" 60" 30" 95 $758
FSECCPWS.30366030R 1.25" 30" 36" 60" 30" 95 $758
FSECCPWS.30366630L 1.25" 30" 36" 66" 30" 103 $843
FSECCPWS.30366630R 1.25" 30" 36" 66" 30" 103 $843
FSECCPWS.30367230L 1.25" 30" 36" 72" 30" 110 $856
FSECCPWS.30367230R 1.25" 30" 36" 72" 30" 110 $856
FSECCPWS.30367830L 1.25" 30" 36" 78" 30" 117 $1,018
FSECCPWS.30367830R 1.25" 30" 36" 78" 30" 117 $1,018
FSECCPWS.30368430L 1.25" 30" 36" 84" 30" 124 $1,032
FSECCPWS.30368430R 1.25" 30" 36" 84" 30" 124 $1,032
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
54
30” D CONNECTING SIDE30” D EXTENSION42” D
30” D CONNECTING SIDE30” D EXTENSION48” D
PART # HEIGHT A B C D WT. (LBS) PRICE
FSECCPWS.30426030L 1.25" 30" 42" 60" 30" 101 $884
FSECCPWS.30426030R 1.25" 30" 42" 60" 30" 101 $884
FSECCPWS.30426630L 1.25" 30" 42" 66" 30" 108 $993
FSECCPWS.30426630R 1.25" 30" 42" 66" 30" 108 $993
FSECCPWS.30427230L 1.25" 30" 42" 72" 30" 114 $1,007
FSECCPWS.30427230R 1.25" 30" 42" 72" 30" 114 $1,007
FSECCPWS.30427830L 1.25" 30" 42" 78" 30" 120 $1,217
FSECCPWS.30427830R 1.25" 30" 42" 78" 30" 120 $1,217
FSECCPWS.30428430L 1.25" 30" 42" 84" 30" 127 $1,232
FSECCPWS.30428430R 1.25" 30" 42" 84" 30" 127 $1,232
PART # HEIGHT A B C D WT. (LBS) PRICE
FSECCPWS.30486030L 1.25" 30" 48" 60" 30" 107 $887
FSECCPWS.30486030R 1.25" 30" 48" 60" 30" 107 $887
FSECCPWS.30486630L 1.25" 30" 48" 66" 30" 113 $997
FSECCPWS.30486630R 1.25" 30" 48" 66" 30" 113 $997
FSECCPWS.30487230L 1.25" 30" 48" 72" 30" 118 $1,010
FSECCPWS.30487230R 1.25" 30" 48" 72" 30" 118 $1,010
FSECCPWS.30487830L 1.25" 30" 48" 78" 30" 124 $1,220
FSECCPWS.30487830R 1.25" 30" 48" 78" 30" 124 $1,220
FSECCPWS.30488430L 1.25" 30" 48" 84" 30" 129 $1,236
FSECCPWS.30488430R 1.25" 30" 48" 84" 30" 129 $1,236
Friant & Associates | www.friant.com
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
55
DESCRIPTION
Worksurface hangs from a panel or Wall Strips. It has a laminate top and a PVC edge. There is a 1” gap at the back of the worksurface for plug and cord passage.
NOTES
• Includes one wire grommet, cantilever brackets, one corner bracket, and attachment hardware.
• Specify L for left extended, and R for right extended.
• Includes one Support Column Leg.• Column Leg Finish: DT Dark Tone.
SPECIFICATION OPTIONS
product #: see charts belowtop, edge finish: see page 5support finish: LG Light Gray, MT Medium Tone, DT Dark Toneworksurface finish: see page 5left or right extended: L for Left, R for Right
ORDER EXAMPLE
product #: FSECCPPWS.24426024Rtop, edge finish: LGsupport finish: DTworksurface finish: 7040A-60 Mahoganyleft or right extended: R
24” D CONNECTING SIDES42” D
24” D CONNECTING SIDES48” D
PART # HEIGHT A B C D WT. (LBS) PRICE
FSECCPPWS.24426024L 1.25" 24" 42" 60" 36" 105 $897
FSECCPPWS.24426024R 1.25" 24" 42" 60" 36" 105 $897
FSECCPPWS.24426624L 1.25" 24" 42" 66" 36" 112 $1,010
FSECCPPWS.24426624R 1.25" 24" 42" 66" 36" 112 $1,010
FSECCPPWS.24427224L 1.25" 24" 42" 72" 36" 119 $1,027
FSECCPPWS.24427224R 1.25" 24" 42" 72" 36" 119 $1,027
FSECCPPWS.24427824L 1.25" 24" 42" 78" 36" 126 $1,242
FSECCPPWS.24427824R 1.25" 24" 42" 78" 36" 126 $1,242
FSECCPPWS.24428424L 1.25" 24" 42" 84" 36" 134 $1,264
FSECCPPWS.24428424R 1.25" 24" 42" 84" 36" 134 $1,264
PART # HEIGHT A B C D WT. (LBS) PRICE
FSECCPPWS.24486024L 1.25" 24" 48" 60" 36" 113 $1,023
FSECCPPWS.24486024R 1.25" 24" 48" 60" 36" 113 $1,023
FSECCPPWS.24486624L 1.25" 24" 48" 66" 36" 120 $1,161
FSECCPPWS.24486624R 1.25" 24" 48" 66" 36" 120 $1,161
FSECCPPWS.24487224L 1.25" 24" 48" 72" 36" 127 $1,178
FSECCPPWS.24487224R 1.25" 24" 48" 72" 36" 127 $1,178
FSECCPPWS.24487824L 1.25" 24" 48" 78" 36" 134 $1,442
FSECCPPWS.24487824R 1.25" 24" 48" 78" 36" 134 $1,442
FSECCPPWS.24488424L 1.25" 24" 48" 84" 36" 141 $1,463
FSECCPPWS.24488424R 1.25" 24" 48" 84" 36" 141 $1,463
Extended Curved Corner P-Shape Peninsula Worksurface
Right Extended shown
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
56
30” D CONNECTING SIDES42” D
30” D CONNECTING SIDES48” D
PART # HEIGHT A B C D WT. (LBS) PRICE
FSECCPPWS.30426030L 1.25" 30" 42" 60" 36" 109 $936
FSECCPPWS.30426030R 1.25" 30" 42" 60" 36" 109 $936
FSECCPPWS.30426630L 1.25" 30" 42" 66" 36" 116 $1,049
FSECCPPWS.30426630R 1.25" 30" 42" 66" 36" 116 $1,049
FSECCPPWS.30427230L 1.25" 30" 42" 72" 36" 123 $1,066
FSECCPPWS.30427230R 1.25" 30" 42" 72" 36" 123 $1,066
FSECCPPWS.30427830L 1.25" 30" 42" 78" 36" 131 $1,282
FSECCPPWS.30427830R 1.25" 30" 42" 78" 36" 131 $1,282
FSECCPPWS.30428430L 1.25" 30" 42" 84" 36" 138 $1,303
FSECCPPWS.30428430R 1.25" 30" 42" 84" 36" 138 $1,303
PART # HEIGHT A B C D WT. (LBS) PRICE
FSECCPPWS.30486030L 1.25" 30" 48" 60" 36" 116 $1,062
FSECCPPWS.30486030R 1.25" 30" 48" 60" 36" 116 $1,062
FSECCPPWS.30486630L 1.25" 30" 48" 66" 36" 123 $1,200
FSECCPPWS.30486630R 1.25" 30" 48" 66" 36" 123 $1,200
FSECCPPWS.30487230L 1.25" 30" 48" 72" 36" 132 $1,217
FSECCPPWS.30487230R 1.25" 30" 48" 72" 36" 132 $1,217
FSECCPPWS.30487830L 1.25" 30" 48" 78" 36" 139 $1,481
FSECCPPWS.30487830R 1.25" 30" 48" 78" 36" 139 $1,481
FSECCPPWS.30488430L 1.25" 30" 48" 84" 36" 146 $1,502
FSECCPPWS.30488430R 1.25" 30" 48" 84" 36" 146 $1,502
Friant & Associates | www.friant.com
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
57
DESCRIPTION
Worksurface hangs from a panel or Wall Strips. It has a laminate top and a PVC edge. There is a 1” gap at the back of the worksurface for plug and cord passage. 60” to 84” worksurfaces have center support.
NOTES
• Includes cantilever brackets and attachment hardware.
SPECIFICATION OPTIONS
product #: see charts belowtop, edge finish: see page 5support finish: LG Light Gray, MT Medium Tone, DT Dark Toneworksurface finish: see page 5
ORDER EXAMPLE
product #: FSEEPWS.246030top, edge finish: LGsupport finish: LGworksurface finish: 7040A-60 Mahogany
24” D LEFT30” D RIGHT
30” D LEFT36” D RIGHT
30” D LEFT24” D RIGHT
36” D LEFT30” D RIGHT
PART # HEIGHT A B C D WT. (LBS) PRICE
FSEEPWS.246030 1.25" 24" 60" 30" — 52 $573
FSEEPWS.246630 1.25" 24" 66" 30" — 59 $647
FSEEPWS.247230 1.25" 24" 72" 30" — 66 $658
FSEEPWS.247830 1.25" 24" 78" 30" — 74 $794
FSEEPWS.248430 1.25" 24" 84" 30" — 81 $808
PART # HEIGHT A B C D WT. (LBS) PRICE
FSEEPWS.306036 1.25" 30" 60" 36" — 57 $674
FSEEPWS.306636 1.25" 30" 66" 36" — 64 $759
FSEEPWS.307236 1.25" 30" 72" 36" — 71 $771
FSEEPWS.307836 1.25" 30" 78" 36" — 79 $931
FSEEPWS.308436 1.25" 30" 84" 36" — 86 $944
PART # HEIGHT A B C D WT. (LBS) PRICE
FSEEPWS.306024 1.25" 30" 60" 24" — 52 $573
FSEEPWS.306624 1.25" 30" 66" 24" — 59 $647
FSEEPWS.307224 1.25" 30" 72" 24" — 66 $658
FSEEPWS.307824 1.25" 30" 78" 24" — 74 $794
FSEEPWS.308424 1.25" 30" 84" 24" — 81 $808
PART # HEIGHT A B C D WT. (LBS) PRICE
FSEEPWS.366030 1.25" 36" 60" 30" — 57 $674
FSEEPWS.366630 1.25" 36" 66" 30" — 64 $759
FSEEPWS.367230 1.25" 36" 72" 30" — 71 $771
FSEEPWS.367830 1.25" 36" 78" 30" — 79 $931
FSEEPWS.368430 1.25" 36" 84" 30" — 86 $944
Elipse End Peninsula
Right Extended shown
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
58
DESCRIPTION
Worksurface hangs from a panel or Wall Strips. It has a laminate top and a PVC edge. There is a 1” gap at the back of the worksurface for plug and cord passage. 60” to 84” worksurfaces have center support.
NOTES
• Includes cantilever brackets and attachment hardware.
• 78”W and 84”W worksurfaces will accept a 42”W or 36”W lateral file.
• 72”W worksurface will accept a 36”W lateral file.
• 66”W worksurface will accept a 30”W lateral file.
• Worksurfaces shorter than 48”W will not accept a pedestal.
• Includes cantilever brackets and attachment hardware.
SPECIFICATION OPTIONS
product #: see charts belowtop, edge finish: see page 5support finish: LG Light Gray, MT Medium Tone, DT Dark Toneworksurface finish: see page 5
ORDER EXAMPLE
product #: FSRWWS.243030top, edge finish: LGsupport finish: DTworksurface finish: 7054-60 Light Cherry
24” D LEFT30” D RIGHT
30” D LEFT24” D RIGHT
PART # HEIGHT A B C D WT. (LBS) PRICE
FSRWWS.243030 1.25" 24" 30" 30" — 40 $276
FSRWWS.243630 1.25" 24" 36" 30" — 46 $325
FSRWWS.244230 1.25" 24" 42" 30" — 53 $331
FSRWWS.244830 1.25" 24" 48" 30" — 60 $416
FSRWWS.245430 1.25" 24" 54" 30" — 66 $421
FSRWWS.246030 1.25" 24" 60" 30" — 74 $506
FSRWWS.246630 1.25" 24" 66" 30" — 81 $512
FSRWWS.247230 1.25" 24" 72" 30" — 88 $579
FSRWWS.247830 1.25" 24" 78" 30" — 95 $708
FSRWWS.248430 1.25" 24" 84" 30" — 102 $711
PART # HEIGHT A B C D WT. (LBS) PRICE
FSRWWS.303024 1.25" 30" 30" 24" — 40 $276
FSRWWS.303624 1.25" 30" 36" 24" — 46 $325
FSRWWS.304224 1.25" 30" 42" 24" — 53 $331
FSRWWS.304824 1.25" 30" 48" 24" — 60 $416
FSRWWS.305424 1.25" 30" 54" 24" — 66 $421
FSRWWS.306024 1.25" 30" 60" 24" — 74 $506
FSRWWS.306624 1.25" 30" 66" 24" — 81 $512
FSRWWS.307224 1.25" 30" 72" 24" — 88 $579
FSRWWS.307824 1.25" 30" 78" 24" — 95 $708
FSRWWS.308424 1.25" 30" 84" 24" — 102 $711
Rectangular Asymmetrical
Right Extended shown
Friant & Associates | www.friant.com
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
59
DESCRIPTION
Worksurface hangs from a panel and has a 120° End, either left or right. The end fits against a panel connected by a 120° Connector. It has a PVC edge. There is a 1” gap at the back of the worksurface for plug and cord passage.
NOTES
• Specify L for left end angle, and R for right end angle.
• Includes cantilever brackets, and attachment hardware.
120° RECTANGULAR PART # HEIGHT A B C D WT. (LBS) PRICE
FS120WS.2424L 1.25" 24" 24" — — 33 $343
FS120WS.2424R 1.25" 24" 24" — — 33 $343
FS120WS.2430L 1.25" 24" 30" — — 40 $376
FS120WS.2430R 1.25" 24" 30" — — 40 $376
FS120WS.2436L 1.25" 24" 36" — — 45 $408
FS120WS.2436R 1.25" 24" 36" — — 45 $408
FS120WS.2442L 1.25" 24" 42" — — 52 $466
FS120WS.2442R 1.25" 24" 42" — — 52 $466
FS120WS.2448L 1.25" 24" 48" — — 57 $475
FS120WS.2448R 1.25" 24" 48" — — 57 $475
FS120WS.2460L 1.25" 24" 60" — — 64 $555
FS120WS.2460R 1.25" 24" 60" — — 64 $555
120° Rectangular
SPECIFICATION OPTIONS
product #: see charts belowtop, edge finish: see page 5support finish: LG Light Gray, MT Medium Tone, DT Dark Toneworksurface finish: see page 5left or right extended: L for Left, R for Right
ORDER EXAMPLE
product #: FS120WS.2424Ltop, edge finish: LGsupport finish: DTworksurface finish: 7040A-60 Mahoganyleft or right extended: L
Right End shown
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
60
DESCRIPTION
Worksurface hangs from a panels. It has a laminate top and a PVC edge. There is a 1” gap at the back of the worksurface for plug and cord passage. Worksurface is 24” deep.
NOTES
• Includes cantilever brackets, corner bracket and attachment hardware.
120° CORNER90° ENDS
PART # HEIGHT A B C D WT. (LBS) PRICE
FS120/90WS.2424 1.25" 24" 24" — — 30 $458
FS120/90WS.2430 1.25" 24" 30" — — 41 $528
FS120/90WS.2436 1.25" 24" 36" — — 50 $671
FS120/90WS.2442 1.25" 24" 42" — — 62 $828
FS120/90WS.2448 1.25" 24" 48" — — 80 $1,034
120° Corner / 90° Ends
SPECIFICATION OPTIONS
product #: see charts belowtop, edge finish: see page 5support finish: LG Light Gray, MT Medium Tone, DT Dark Toneworksurface finish: see page 5
ORDER EXAMPLE
product #: FS12090WS.2424top, edge finish: LGsupport finish: DTworksurface finish: 7040A-60 Mahogany
Friant & Associates | www.friant.com
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
61
DESCRIPTION
Worksurface hangs from panels. It has a PVC edge. There is a 1” gap at the back of the worksurface for plug and cord passage. Worksurface is 24” deep.
NOTES
• Includes cantilever brackets, corner bracket, and attachment hardware.
120° CORNER120° ENDS
PART # HEIGHT A B C D WT. (LBS) PRICE
FS120/120WS.2436 1.25" 24" 36" — — 50 $677
FS120/120WS.2442 1.25" 24" 42" — — 62 $834
FS120/120WS.2448 1.25" 24" 48" — — 80 $1,040
120° Corner / 120° Ends
SPECIFICATION OPTIONS
product #: see charts belowtop, edge finish: see page 5support finish: LG Light Gray, MT Medium Tone, DT Dark Toneworksurface finish: see page 5
ORDER EXAMPLE
product #: FS120120WS.2436top, edge finish: LGsupport finish: DTworksurface finish: 7054-60 Light Cherry
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
62
DESCRIPTION
Worksurface hangs from two panels, connected by a 135° 2-Way Connector. It has a laminate top and a PVC edge. There is a 1” gap at the back of the worksurface for plug and cord passage.
NOTES
• The width of each side of the worksurface must match the width of the adjacent panels.
• Includes cantilever brackets, corner bracket, and attachment hardware.
24” D
PART # HEIGHT A B C D WT. (LBS) PRICE
FS135CWS24.2424 1.25" 24" 24" 24" — 50 $604
FS135CWS24.3030 1.25" 24" 30" 30" — 54 $714
FS135CWS24.4824 1.25" 24" 48" 24" — 70 $678
FS135CWS24.2448 1.25" 24" 24" 48" — 70 $831
30” D
PART # HEIGHT A B C D WT. (LBS) PRICE
FS135CWS30.2424 1.25" 30" 24" 24" 55 $630
FS135CWS30.3030 1.25" 30" 30" 30" 59 $743
FS135CWS30.4824 1.25" 30" 48" 24" 74 $845
FS135CWS30.2448 1.25" 30" 24" 48" 74 $852
135° Corner
SPECIFICATION OPTIONS
product #: see charts belowtop, edge finish: see page 5support finish: LG Light Gray, MT Medium Tone, DT Dark Toneworksurface finish: see page 5
ORDER EXAMPLE
product #: FS135CWS24.2424top, edge finish: LGsupport finish: DTworksurface finish: 7054-60 Light Cherry
Friant & Associates | www.friant.com
SYSTEM 2
SY
STE
M W
OR
KSU
RFA
CE
S
63
DESCRIPTION
Worksurface hangs from three panels connected by two 135° 2-Way Connectors. It has a PVC edge. There is a 1” gap at the back of the worksurface for plug and cord passage.
NOTES
• The width of each side of the worksurface must match the width of the adjacent panels.
• Includes cantilever brackets, corner bracket, and attachment hardware.
24” D
PART # HEIGHT A B C D WT. (LBS) PRICE
FS135DCWS24.244824 1.25" 24" 24" 48" 24" 80 $1,165
30” D
PART # HEIGHT A B C D WT. (LBS) PRICE
FS135DCWS30.244824 1.25" 30" 24" 48" 24" 84 $1,168
135° Double Corner
SPECIFICATION OPTIONS
product #: see charts belowtop, edge finish: see page 5support finish: LG Light Gray, MT Medium Tone, DT Dark Toneworksurface finish: see page 5
ORDER EXAMPLE
product #: FS235DCWS24.244824top, edge finish: LGsupport finish: DTworksurface finish: 7054-60 Light Cherry
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
TR
AN
SA
CTIO
N W
OR
KSU
RFA
CE
S
64
DESCRIPTION
14” D Rectangular Transaction Worksurface attaches to the top of a panel. Ends are flush with the panel. It has a PVC edge.
NOTES
• Attaches to the top of a panel for counter or display area.
• Order transaction surface supports separately.
Transaction Surface
SPECIFICATION OPTIONS
product #: see charts belowtop, edge finish: see page 5support finish: LG Light Gray, MT Medium Tone, DT Dark Toneworksurface finish: see page 5
ORDER EXAMPLE
product #: FSERTS.1424Ltop, edge finish: LGsupport finish: DTworksurface finish: 7054-60 Light Cherry
TRANSACTIONSURFACE
PART # HEIGHT A B C D WT. (LBS) PRICE
FSERTS.1424L 1.25" 14" 24" — — 17 $153
FSERTS.1430L 1.25" 14" 30" — — 21 $180
FSERTS.1436L 1.25" 14" 36" — — 24 $196
FSERTS.1442L 1.25" 14" 42" — — 27 $241
FSERTS.1448L 1.25" 14" 48" — — 31 $245
FSERTS.1460L 1.25" 14" 60" — — 38 $288
FSERTS.1472L 1.25" 14" 72" — — 43 $333
Friant & Associates | www.friant.com
SYSTEM 2
TR
AN
SA
CTIO
N W
OR
KSU
RFA
CE
S
65
DESCRIPTION
14” D Corner Transaction Worksurface attaches to the top of two panels. Ends are flush with the panel. It has a PVC edge.
NOTES
• Attaches to the top of two 24”, 30”, 36”, 42”, or 48”W.
• Panels connected at a 90° angle for corner counter or display area.
• Order transaction surface supports separately.
Corner Transaction
SPECIFICATION OPTIONS
product #: see charts belowtop, edge finish: see page 5support finish: LG Light Gray, MT Medium Tone, DT Dark Toneworksurface finish: see page 5
ORDER EXAMPLE
product #: FSECTS.24top, edge finish: LGsupport finish: DTworksurface finish: 7054-60 Light Cherry
CORNERTRANSACTION
PART # HEIGHT A B C D WT. (LBS) PRICE
FSECTS.24 1.25" 14" 32" — — 40 $321
FSECTS.30 1.25" 14" 38" — — 48 $447
FSECTS.36 1.25" 14" 44" — — 55 $500
FSECTS.42 1.25" 14" 50" — — 62 $728
FSECTS.48 1.25" 14" 56" — — 71 $732
B
B
14”
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
TR
AN
SA
CTIO
N W
OR
KSU
RFA
CE
S
66
DESCRIPTION
This Flat Bracket is used to support two worksurfaces when a support leg or panel leg is inappropriate.
NOTES
• Flat Bracket finish: Black Umber.
Flat Bracket
SPECIFICATION OPTIONS
product #: see chart below
ORDER EXAMPLE
product #: F2FB.18
FLAT BRACKET PART # HEIGHT A B C D WT. (LBS) PRICE
F2FB.18 3" 18" — — — 1 $30
Mending Plates
DESCRIPTION SPECIFICATION OPTIONS
This Mending Plate is to be ordered if you're placing corner workstations next to other corner workstations without a rectangular worksurface return. Mending plate size is 2” x 4”.
product #: see charts below
NOTES ORDER EXAMPLE
• Sold in pairs product #: FTFB.18
MENDING PLATES PART # HEIGHT A B C D WT. (LBS) PRICE
FASS22-0-ZN — — — — — 1 $3
Friant & Associates | www.friant.com
67
SYSTEM 2
MY-H
ITE
WO
RK
SU
RFA
CE
S
DESCRIPTION
Worksurface top only, for use with height
adjustable base within workstation application
NOTES
• Add circular grommet (add $75 list) Specify GL, GC, GR (For position description, see page 6)
• Order base separately from MY-HITE pricebook
SPECIFICATION OPTIONS
product #: see charts belowtop, edge finish: worksurface finish:see page 5
ORDER EXAMPLE
product #: FSQAHT-3054edge finish: DT Dark Toneworksurface finish: M1 Light Maple
Rectangular Worksurfaces For Use w/ My-Hite Bases
PRICE BOOK
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FSRWS.2340 - 40” 23” - $222 Sizes are actual for example
FTRWS.2370 is 23” x 70”FSRWS.2346 - 46” 23” - $227
FSRWS.2352 - 52” 23” - $260
FSRWS.2358 - 58” 23” - $284
FSRWS.2364 - 64” 23” - $316
FSRWS.2370 - 70” 23” - $324
FSRWS.2376 - 76” 23” - $400
FSRWS.2940 - 40” 29” - $285
FSRWS.2946 - 46” 29” - $293
FSRWS.2952 - 52” 29” - $331
FSRWS.2958 - 58” 29” - $355
FSRWS.2964 - 64” 29” - $396
FSRWS.2970 - 70” 29” - $404
FSRWS.2976 - 76” 29” - $497
Note: Top size reduced 1” in depth and 2” in width to fit within system workstation and prevent pinch points. See system pricebook for details. We do not recommend using full size worktop in paneled workstation appplications.
SQUARE EDGE RECTANGULAR
WORKSURFACE
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
68
SYSTEM 2
MY-H
ITE
WO
RK
SU
RFA
CE
S
Corner Worksurfaces For Use w/ My-Hite Bases
DESCRIPTION SPECIFICATION OPTIONS
Corner worksurface top only, for use with
height adjustable base within workstation
application.
product #: see charts belowtop, edge finish: worksurface finish: see page 5
NOTES ORDER EXAMPLE
• Add circular grommet (add $75 list) Specify GL, GC, GR
• Order base separately from MY-HITE pricebook
product #: FCNAHT-2448edge finish: DT Dark Toneworksurface finish: M1 Light Maple
SQUARE EDGE CORNER
WORKSURFACE
Note: Top size reduced 1” in depth and 2” in with to fit within system workstation and prevent pinch points. See system pricebook for details. We do not recommend using full size worktop in paneled workstation appplications.
PRICE BOOK
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FSCWS.2340 - 40” 23” - $328 Sizes are actual for example
FTRWS.2370 is 23” x 70”FSCWS.2346 - 46” 23” - $346
FSCWS.2940 - 40” 29” - $356
FSCWS.2946 - 46” 29” - $374
Friant & Associates | www.friant.com
69
SYSTEM 2
MY-H
ITE
WO
RK
SU
RFA
CE
S
Worksurfaces For Use w/ My-Hite Bases
DESCRIPTION
Laminate worksurface with 3mm PVC edge
NOTES
Worksurface top only, for use with height adjustable base within workstation application• See My-Hite pricebook for use inside a
freestanding application• Add circular grommet (add $75 list)
Specify grommet placement GL, GC, GR• Top size reduced 1” in depth and 2” in
width to fit within system workstation and prevent pinch points.
• We do not recommend using full size worktop in paneled workstation applications
SPECIFICATION OPTIONS
product #: see charts belowtop, edge, worksurface finish: see page 5left or right extended: L for Left, R for Right
ORDER EXAMPLE
product #: FSECCWS.23345823Ltop, edge finish: E10 Espressoworksurface finish: M11 Light Walnut
23” D CONNECTING SIDE23” D EXTENSION34” D
90° Extended Curved Corner Worksurface For Use w/ My-Hite Bases
Right Extended shown
29” D CONNECTING SIDE29” D EXTENSION34” D
PART # HEIGHT A B C D PRICE
FSECCWS.23345823L 1.25" 23" 34" 58" 23" $428
FSECCWS.23345823R 1.25" 23" 34" 58" 23" $428
FSECCWS.23346423L 1.25" 23" 34" 64" 23" $476
FSECCWS.23346423R 1.25" 23" 34" 64" 23" $476
FSECCWS.23347023L 1.25" 23" 34" 70" 23" $484
FSECCWS.23347023R 1.25" 23" 34" 70" 23" $484
FSECCWS.23347623L 1.25" 23" 34" 76" 23" $581
FSECCWS.23347623R 1.25" 23" 34" 76" 23" $581
PART # HEIGHT A B C D PRICE
FSECCWS.29345829L 1.25" 29" 34" 58" 29" $468
FSECCWS.29345829R 1.25" 29" 34" 58" 29" $468
FSECCWS.29346429L 1.25" 29" 34" 64" 29" $516
FSECCWS.29346429R 1.25" 29" 34" 64" 29" $516
FSECCWS.29347029L 1.25" 29" 34" 70" 29" $524
FSECCWS.29347029R 1.25" 29" 34" 70" 29" $524
FSECCWS.29347629L 1.25" 29" 34" 76" 29" $620
FSECCWS.29347629R 1.25" 29" 34" 76" 29" $620
A
A
B
C
D
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
70
SYSTEM 2
MY-H
ITE
WO
RK
SU
RFA
CE
S
23” D CONNECTING SIDE23” D EXTENSION40” D
29” D CONNECTING SIDE29” D EXTENSION40” D
PART # HEIGHT A B C D PRICE
FSECCWS.23405823L 1.25" 23" 40" 58" 23" $514
FSECCWS.23405823R 1.25" 23" 40" 58" 23" $514
FSECCWS.23406423L 1.25" 23" 40" 64" 23" $579
FSECCWS.23406423R 1.25" 23" 40" 64" 23" $579
FSECCWS.23407023L 1.25" 23" 40" 70" 23" $587
FSECCWS.23407023R 1.25" 23" 40" 70" 23" $587
FSECCWS.23407623L 1.25" 23" 40" 76" 23" $712
FSECCWS.23407623R 1.25" 23" 40" 76" 23" $712
PART # HEIGHT A B C D PRICE
FSECCWS.29405829L 1.25" 29" 40" 58" 29" $554
FSECCWS.29405829R 1.25" 29" 40" 58" 29" $554
FSECCWS.29406429L 1.25" 29" 40" 64" 29" $618
FSECCWS.29406429R 1.25" 29" 40" 64" 29" $618
FSECCWS.29407029L 1.25" 29" 40" 70" 29" $626
FSECCWS.29407029R 1.25" 29" 40" 70" 29" $626
FSECCWS.29407629L 1.25" 29" 40" 76" 29" $752
FSECCWS.29407629R 1.25" 29" 40" 76" 29" $752
Friant & Associates | www.friant.com
71
SYSTEM 2
MY-H
ITE
WO
RK
SU
RFA
CE
S
PART # HEIGHT A B C D PRICE
FSECCWS.23465823L 1.25" 23" 46" 58" 23" $522
FSECCWS.23465823R 1.25" 23" 46" 58" 23" $522
FSECCWS.23466423L 1.25" 23" 46" 64" 23" $587
FSECCWS.23466423R 1.25" 23" 46" 64" 23" $587
FSECCWS.23467023L 1.25" 23" 46" 70" 23" $600
FSECCWS.23467023R 1.25" 23" 46" 70" 23" $600
FSECCWS.23467623L 1.25" 23" 46" 76" 23" $732
FSECCWS.23467623R 1.25" 23" 46" 76" 23" $732
PART # HEIGHT A B C D PRICE
FSECCWS.29465829L 1.25" 29" 46" 58" 29" $563
FSECCWS.29465829R 1.25" 29" 46" 58" 29" $563
FSECCWS.29466429L 1.25" 29" 46" 64" 29" $626
FSECCWS.29466429R 1.25" 29" 46" 64" 29" $626
FSECCWS.29467029L 1.25" 29" 46" 70" 29" $641
FSECCWS.29467029R 1.25" 29" 46" 70" 29" $641
FSECCWS.29467629L 1.25" 29" 46" 76" 29" $771
FSECCWS.29467629R 1.25" 29" 46" 76" 29" $771
23” D CONNECTING SIDE23” D EXTENSION46” D
29” D CONNECTING SIDE29” D EXTENSION46” D
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
72
SYSTEM 2
MY-H
ITE
WO
RK
SU
RFA
CE
S
Wedge Worksurface For Use w/ My-Hite Bases
PART # HEIGHT A B C D PRICE
FSWDWS.234029 1.25" 23" 40" 29" — $295
FSWDWS.234629 1.25" 23" 46" 29" — $302
FSWDWS.235229 1.25" 23" 52" 29" — $342
FSWDWS.235829 1.25" 23" 58" 29" — $366
FSWDWS.236429 1.25" 23" 64" 29" — $409
FSWDWS.237029 1.25" 23" 70" 29" — $418
FSWDWS.237629 1.25" 23" 76" 29" — $486
PART # HEIGHT A B C D PRICE
FSWDWS.294023 1.25" 29" 40" 23" — $295
FSWDWS.294623 1.25" 29" 46" 23" — $302
FSWDWS.295223 1.25" 29" 52" 23" — $342
FSWDWS.295823 1.25" 29" 58" 23" — $366
FSWDWS.296423 1.25" 29" 64" 23" — $409
FSWDWS.297023 1.25" 29" 70" 23" — $418
FSWDWS.297623 1.25" 29" 76" 23" — $486
23"D LEFT29"D RIGHT
29"D LEFT23"D RIGHT
A C
B
DESCRIPTION SPECIFICATION OPTIONS
Worksurface top only, for use with height
adjustable base within workstation
application
product #: see charts belowtop, edge finish: worksurface finish:see page 5
NOTES ORDER EXAMPLE
• Add grommet (add $75 list) Specify GL, GC, GR
• Order base separately from MY-HITE pricebook
PRODUCT #:FSWDWS.234029edge finish: DT Dark Tone, E12worksurface finish: Espresso, M10grommet: GC (Rear Center)
Note: Top size reduced 1” in depth and 2” in width to fit within system workstation and prevent pinch points. We do not recommend using full size work-top in paneled workstation appplications.
Friant & Associates | www.friant.com
73
SYSTEM 2
MY-H
ITE
WO
RK
SU
RFA
CE
S
120° Corner / 90° Ends Worksurface For Use w/ My-Hite Bases
PART # HEIGHT A B C D PRICE
FS120-90WS.2334 1.25" 23" 34" — — $509
FS120-90WS.2340 1.25" 23" 40" — — $608
FS120-90WS.2346 1.25" 23" 46" — — $740
PART # HEIGHT A B C D PRICE
FS120-120WS.2334 1.25" 23" 34" — — $514
FS120-120WS.2340 1.25" 23" 40" — — $616
FS120-120WS.2346 1.25" 23" 46" $748
120° CORNER90° ENDS
120° CORNER120° ENDS
120° Corner / 120° Ends Worksurface For Use w/ My-Hite Bases
DESCRIPTION SPECIFICATION OPTIONS
Worksurface top only, for use with height
adjustable base within workstation
application
product #: see charts belowtop, edge finish: worksurface finish:see page 5
NOTES ORDER EXAMPLE
• Add grommet (add $75 list) Specify GL, GC, GR
• Order base separately from MY-HITE pricebook
PRODUCT #:FD120-90WS.2436edge finish: DT Dark Tone, E12worksurface finish: Espresso, M10grommet: GC (Rear Center)
DESCRIPTION SPECIFICATION OPTIONS
Worksurface top only, for use with height
adjustable base within workstation
application
product #: see charts belowtop, edge finish: worksurface finish:see page 5
NOTES ORDER EXAMPLE
• Add grommet (add $75 list) Specify GL, GC, GR
• Order base separately from MY-HITE pricebook
PRODUCT #:FD120-120WS.2436edge finish: DT Dark Tone, E12worksurface finish: Espresso, M10grommet: GC (Rear Center)
Note: Top size reduced 1” in depth and 2” in width to fit within system workstation and prevent pinch points. We do not recommend using full size work-top in paneled workstation appplications.
Note: Top size reduced 1” in depth and 2” in with to fit within system workstation and prevent pinch points. We do not recommend using full size work-top in paneled workstation appplications.
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 2
TR
AN
SA
CTIO
N W
OR
KSU
RFA
CE
S
74
SQUARE EDGED-SHAPED
PART # HEIGHT A B C D PRICE
FSEDSP.2346 1.25" 46" 23" — — $527
FSEDSP.2358 1.25" 58" 23" — — $600
FSEDSP.2946 1.25" 46" 29" — — $592
FSEDSP.2958 1.25" 58" 29" — — $671
FSEDSP.2970 1.25" 70" 29" — — $750
FSEDSP.3570 1.25" 70" 35" — — $842
D-Shaped Worksurface For Use w/ My-Hite Bases
DESCRIPTION SPECIFICATION OPTIONS
Worksurface top only, for use with height
adjustable base within workstation
application
product #: see charts belowtop, edge finish: worksurface finish:see page 5
NOTES ORDER EXAMPLE
• Add grommet (add $75 list) Location is GC
• Order base separately from MY-HITE pricebook
PRODUCT #:FSEDSP.2346edge finish: DT Dark Tone, E12worksurface finish: Espresso, M10grommet: GC (Rear Center)
Note: Top size reduced 1” in depth and 2” in width to fit within system workstation and prevent pinch points. We do not recommend using full size work-top in paneled workstation appplications.
Friant & Associates | www.friant.com
SYSTEM 1 & 2
WO
RK
SU
RFA
CE
SU
PP
OR
T
75
DESCRIPTION
Provide support to the worksurface.
NOTES
• Nonhanded Thermally Fused laminate panel supports left or right side of worksurface.
• It has a 3mm PVC edge.• Attaches to worksurface.• Includes leveling glides and attachment
hardware.
SPECIFICATION OPTIONS
product #: see charts belowfinish: see page 5support finish: DT Dark Tone, MT Medium Tone
ORDER EXAMPLE
product #: FWSSEP.24-MELfinish: LGsupport finish: MT
Supports
WORKSURFACESUPPORT END PANEL
WORKSURFACESUPPORT P-LEG
WORKSURFACESUPPORT END PANEL
WORKSURFACESUPPORT P-LEG
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
FWSSEP.24-MEL 27.75" 1.25" 24" 26 $212 Attaches to a worksurface and a frame or wall strip.
Finishes: DT, MT, LG
FWSSEP.30-MEL 27.75" 1.25" 30" 32 $244
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
FWSSPL.24-MEL 27.75" 1.25" 24" 17 $212 Attaches to a worksurface and a frame or wall strip.
Finishes: DT, MT, LG, BU or CW
FWSSPL.30-MEL 27.75" 1.25" 30" 20 $244
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
FWSSEP.24-LAM 27.75" 1.25" 24" 26 $318 Attaches to a worksurface and a frame or wall strip.
This panel uses a Hardsurface Panel Finish. See page 5 for finish options.
FWSSEP.30-LAM 27.75" 1.25" 30" 32 $365
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
FWSSPL.24-LAM 27.75" 1.25" 24" 17 $319 Attaches to a worksurface and a frame or wall strip.
This panel uses a Hardsurface Panel Finish. See page 5 for finish options.
FWSSPL.30-LAM 27.75" 1.25" 30" 20 $347
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 1 & 2
WO
RK
SU
RFA
CE
SU
PP
OR
T
76
DUAL COLUMN LEG
COLUMN LEG
TRANSACTIONSURFACE SUPPORT,END
TRANSACTIONSURFACE SUPPORT,MID-END
TRANSACTIONSURFACE SUPPORT,CENTER
WORKSURFACEBRACKET
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2DCL 27.75" 18" 25 $138 Attaches to the underside of a worksurface.
Has adjustable glides.
Finish: DT Dark Tone.
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2CL.3 27.75" 3"Dia — 12 $90 Attaches to the underside of a worksurface.
Has an adjustable glide.
Finish: DT Dark Tone.
F2CL.4 27.75" 4"Dia — 16 $111
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FTSSE 2.5" 1" 10" 1 $29 Placed above the last panel in a run.
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FTSSM/E 2" 1" 10" 1 $29 Supports a transaction surface in a 180° application.
Placed above a straight-line connector, in a 2-Way 180° connector, or a 2-, 3- or 4-Way 90° connector.
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FTSSC 2" 1" 10" 1 $30 Supports two transaction sur-faces in a 180° application.
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FWSB.L 2.75" — 2.5" 0.25 $11 Attaches to the front corner of a hanging worksurface to provide additional support when the return panel matches the worksurface depth.
Also used as support for the back corner of a corner worksurface.
Specify left or right.
Color: Black
FWSB.R 2.75" — 2.5" 0.25 $11
Friant & Associates | www.friant.com
SYSTEM 1 & 2
WO
RK
SU
RFA
CE
SU
PP
OR
T
77
DESCRIPTION
Storage and components for the workstation.
NOTES
• For “A” style components, call factory for availability.
SPECIFICATION OPTIONS
product #: see charts belowfinish: LG Light Gray, MT Medium Tone, DT Dark Tonefabric (flipper door and unit only): see page 4
ORDER EXAMPLE
product #: F1HSH.1324finish: LGfabric: PF101-1 Slide - Caramel
Components / Storage
“A” STYLE SHELFHALF HEIGHT
“A” STYLE SHELFFULL HEIGHT
“B” STYLE SHELFHALF HEIGHT
“B” STYLE SHELFFULL HEIGHT
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F1HSH.1324 7.5" 24" 12.5" 12 $127 Hangs from panel or wall strips.
Includes attachment hardware.F1HSH.1330 7.5" 30" 12.5" 13 $135
F1HSH.1336 7.5" 36" 12.5" 13 $145
F1HSH.1342 7.5" 42" 12.5" 14 $156
F1HSH.1348 7.5" 48" 12.5" 15 $164
F1HSH.1360 7.5" 60" 12.5" 18 $186
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F1FSH.1324 15.5" 24" 12.5" 16 $152 Hangs from panel or wall strips.
Includes attachment hardware.F1FSH.1330 15.5" 30" 12.5" 17 $157
F1FSH.1336 15.5" 36" 12.5" 17 $165
F1FSH.1342 15.5" 42" 12.5" 18 $175
F1FSH.1348 15.5" 48" 12.5" 19 $177
F1FSH.1360 15.5" 60" 12.5" 22 $195
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2HSH.1324 7.5" 24" 12.5" 12 $127 Hangs from panel or wall strips.
Includes attachment hardware.F2HSH.1330 7.5" 30" 12.5" 13 $135
F2HSH.1336 7.5" 36" 12.5" 13 $145
F2HSH.1342 7.5" 42" 12.5" 14 $156
F2HSH.1348 7.5" 48" 12.5" 15 $164
F2HSH.1360 7.5" 60" 12.5" 18 $186
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2FSH.1324 15.5" 24" 12.5" 16 $152 Hangs from panel or wall strips.
Includes attachment hardware.F2FSH.1330 15.5" 30" 12.5" 17 $157
F2FSH.1336 15.5" 36" 12.5" 17 $165
F2FSH.1342 15.5" 42" 12.5" 18 $175
F2FSH.1348 15.5" 48" 12.5" 19 $177
F2FSH.1360 15.5" 60" 12.5" 22 $195
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 1 & 2
WO
RK
SU
RFA
CE
SU
PP
OR
T
78
“B” STYLE LOCKINGPAINTED FLIPPER DOOR
“B” STYLE LOCKINGPAINTED FLIPPER UNIT
“B” STYLE LOCKINGFABRIC FLIPPER DOOR
“B” STYLE LOCKINGFABRIC FLIPPER UNIT
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2PFLD.1324L 15.5" 24" 12.5" 11 $196 Attaches to 15.5” high shelf to create a locking storage unit.
Includes a painted front, a lock and attaching hardware.
Lock Finish: Black
Order shelf separately.
F2PFLD.1330L 15.5" 30" 12.5" 14 $217
F2PFLD.1336L 15.5" 36" 12.5" 16 $233
F2PFLD.1342L 15.5" 42" 12.5" 18 $249
F2PFLD.1348L 15.5" 48" 12.5" 20 $260
F2PFLD.1360L 15.5" 60" 12.5" 25 $323
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2PFLU.1324L 15.5" 24" 12.5" 27 $307 Lockable storage unit, hangs from panel or wall strips.
Includes a painted front, a lock and attaching hardware.
Lock Finish: Black.
F2PFLU.1330L 15.5" 30" 12.5" 31 $329
F2PFLU.1336L 15.5" 36" 12.5" 33 $366
F2PFLU.1342L 15.5" 42" 12.5" 36 $382
F2PFLU.1348L 15.5" 48" 12.5" 39 $408
F2PFLU.1360L 15.5" 60" 12.5" 47 $498
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2FFLD.1324L 15.5" 24" 12.5" 11 $339 Attaches to 15.5” high shelf to create a locking storage unit.
Includes fabric front, a lock and attaching hardware.
Lock Finish: Black
Order shelf separately.
F2FFLD.1330L 15.5" 30" 12.5" 14 $357
F2FFLD.1336L 15.5" 36" 12.5" 16 $378
F2FFLD.1342L 15.5" 42" 12.5" 18 $400
F2FFLD.1348L 15.5" 48" 12.5" 20 $420
F2FFLD.1360L 15.5" 60" 12.5" 25 $498
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2FFLU.1324L 15.5" 24" 12.5" 27 $470 Lockable storage unit, hangs from panel or wall strips.
Includes fabric front, a lock and attaching hardware.
Lock Finish: Black.
F2FFLU.1330L 15.5" 30" 12.5" 31 $490
F2FFLU.1336L 15.5" 36" 12.5" 33 $519
F2FFLU.1342L 15.5" 42" 12.5" 36 $550
F2FFLU.1348L 15.5" 48" 12.5" 39 $575
F2FFLU.1360L 15.5" 60" 12.5" 47 $676
Friant & Associates | www.friant.com
SYSTEM 1 & 2
WO
RK
SU
RFA
CE
SU
PP
OR
T
79
LED TASKLIGHT
WIRE MANAGER
PENCIL DRAWER
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FLED.20 0.75" 20" 1" 1 $192 Attaches beneath shelf or flipper unit.
Includes an LED light, power cord motion sensor, and installation hardware.
Has a pivot range of +/-15°.
For overheads 24”-36” use
FLED.20
For overheads 42” or wider use
FLED.38
Finish: Silver
FLED.38 0.75" 38" 1" 2 $243
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2WM.24 24" .5" — 1 $16 This Wire Manager is used to manage electrical cords vertically. It fits between side-by-side panels, or between a panel and a connector.
Finish: Black.
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FPD 1.875" 21.125" 16.25” 5 $143 Stores small items.
Attaches under worksurface.
Includes attachment hardware.
Finish: DT Dark Tone, MT Medium Tone.
Components / Storage (cont’d)
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 1 & 2
WO
RK
SU
RFA
CE
SU
PP
OR
T
80
Frameless Glass
DESCRIPTION
NOTES
• Frameless Glass screens are attached to the top of a single frame with included hardware.
• Matches width of the frame.• Package contains 2.
SPECIFICATION OPTIONS
product #: see charts below
ORDER EXAMPLE
product #: F2FG.0824-CL
FRAMELESS GLASS 8”CLEAR
FRAMELESS GLASS 14”CLEAR
FRAMELESS GLASS 8”FROSTED
FRAMELESS GLASS 14”FROSTED
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2FG.0824-CL 8” 23-1/4” — — $252 Includes attachment hardware, brushed finish.
Package contains 2.
F2FG.0830-CL 8” 29-1/4” — — $272
F2FG.0836-CL 8” 35-1/4” — — $292
F2FG.0842-CL 8” 41-1/4” — — $312
F2FG.0848-CL 8” 47-1/4” — — $332
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2FG.1424-CL 14” 23-1/4” — — $312 Includes attachment hardware, brushed finish.
Package contains 2.
F2FG.1430-CL 14” 29-1/4” — — $346
F2FG.1436-CL 14” 35-1/4” — — $378
F2FG.1442-CL 14” 41-1/4” — — $410
F2FG.1448-CL 14” 47-1/4” — — $446
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2FG.0824-FR 8” 23-1/4” — — $290 Includes attachment hardware, brushed finish.
Package contains 2.
F2FG.0830-FR 8” 29-1/4” — — $328
F2FG.0836-FR 8” 35-1/4” — — $366
F2FG.0842-FR 8” 41-1/4” — — $404
F2FG.0848-FR 8” 47-1/4” — — $442
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2FG.1424-FR 14” 23-1/4” — — $404 Includes attachment hardware, brushed finish.
Package contains 2.
F2FG.1430-FR 14” 29-1/4” — — $468
F2FG.1436-FR 14” 35-1/4” — — $532
F2FG.1442-FR 14” 41-1/4” — — $594
F2FG.1448-FR 14” 47-1/4” — — $662
Friant & Associates | www.friant.com
SYSTEM 1 & 2
WO
RK
SU
RFA
CE
SU
PP
OR
T
81
DESCRIPTION
Fabric covered tackable surface that attaches to panel or Wall Strips.
NOTES
• Includes attachment hardware.• For “A” style components, call factory for
availability.
SPECIFICATION OPTIONS
product #: see charts belowfabric: see page 4
ORDER EXAMPLE
product #: FITAKBR.0924fabric: PF301-1 Sky - Terra
Tackboards
“A” STYLE TACKBOARDROUNDED CORNERS8.5” HIGH
“A” STYLE TACKBOARDROUNDED CORNERS15.5” HIGH
“B” STYLE TACKBOARDSQUARE CORNERSCURVED TOP & BOTTOM15.5” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F1TAKBR.0924 8.5" 24" — 3 $77
F1TAKBR.0930 8.5" 30" — 4 $83
F1TAKBR.0936 8.5" 36" — 4 $93
F1TAKBR.0942 8.5" 42" — 5 $101
F1TAKBR.0948 8.5" 48" — 6 $106
F1TAKBR.0960 8.5" 60" — 7 $117
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F1TAKBR.1624 15.5" 24" — 6 $144
F1TAKBR.1630 15.5" 30" — 7 $153
F1TAKBR.1636 15.5" 36" — 9 $160
F1TAKBR.1642 15.5" 42" — 10 $167
F1TAKBR.1648 15.5" 48" — 11 $178
F1TAKBR.1660 15.5" 60" — 13 $202
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2TAKBS.1624 15.5" 24" — 6 $144
F2TAKBS.1630 15.5" 30" — 7 $153
F2TAKBS.1636 15.5" 36" — 9 $160
F2TAKBS.1642 15.5" 42" — 10 $167
F2TAKBS.1648 15.5" 48" — 11 $178
F2TAKBS.1660 15.5" 60" — 13 $202
“B” STYLE TACKBOARDSQUARE CORNERSCURVED TOP & BOTTOM8.5” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2TAKBS.0924 8.5" 24" — 3 $77
F2TAKBS.0930 8.5" 30" — 4 $83
F2TAKBS.0936 8.5" 36" — 4 $93
F2TAKBS.0942 8.5" 42" — 5 $101
F2TAKBS.0948 8.5" 48" — 6 $106
F2TAKBS.0960 8.5" 60" — 7 $117
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 1 & 2
WO
RK
SU
RFA
CE
SU
PP
OR
T
82
DESCRIPTION
Markerboard surface.
NOTES
SPECIFICATION OPTIONS
product #: see charts below
ORDER EXAMPLE
product #: F2MARBS.2424
Markerboards
“B” STYLEMARKERBOARDSQUARE CORNERS24” HIGH
“B” STYLEMARKERBOARDSQUARE CORNERS48” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2MARBS.2424 24" 24" — 3 $244
F2MARBS.2430 24” 30" — 4 $267
F2MARBS.2436 24” 36" — 4 $278
F2MARBS.2442 24” 42" — 5 $292
F2MARBS.2448 24” 48" — 6 $302
F2MARBS.2460 24” 60" — 7 $344
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F2MARBS.4824 48" 24" — 20 $302
F2MARBS.4830 48" 30" — 24 $339
F2MARBS.4836 48" 36" — 30 $382
F2MARBS.4842 48" 42" — 32 $430
F2MARBS.4848 48" 48" — 36 $487
F2MARBS.4860 48" 60" — 40 $551
Friant & Associates | www.friant.com
SYSTEM 1 & 2
WO
RK
SU
RFA
CE
SU
PP
OR
T
83
Modesty Panel, Laminate
PART # HEIGHT WIDTH LIST NOTES
FLMOD.0836 8" 36" $164 Modesty panel is actual width
FLMOD.0842 8" 42" $169
FLMOD.0848 8" 48" $174
FLMOD.0854 8" 54" $210
FLMOD.0860 8" 60" $263
FLMOD.0866 8" 66" $268
FLMOD.0872 8" 72" $273
FLMOD.0884 8" 84" $284
FLMOD.0896 8" 96" $294
FLMOD.1636 16" 36" $201
FLMOD.1642 16" 42" $206
FLMOD.1648 16" 48" $212
FLMOD.1654 16" 54" $278
FLMOD.1660 16" 60" $331
FLMOD.1666 16" 66" $336
FLMOD.1672 16" 72" $342
FLMOD.1684 16" 84" $352
FLMOD.1696 16" 96" $362
DESCRIPTION SPECIFICATION OPTIONS
Laminate modesty panel with matching 2mm PVC edge
product #: see charts belowPaint (Brackets) CW, BU, SVLaminate (Modesty Panel) see page 5
NOTES ORDER EXAMPLE
product #: FLMOD.0836 paint: CW, Cloud White laminate: M12, Medium Walnut
Laminate Modesty Panel
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
84
SYSTEM 1 & 2
STO
RA
GE
Privacy Screen, Fabric
PART # HEIGHT WIDTH LIST NOTES
FPSFLUSH.2442 24” 34” $398Privacy screen sits flush with the back of
the worktop.
Privacy screen is 8” shorter than free standing top width and 6” shorter than a worksurface from a paneled system.
Example:
1. Actual width of FPSFLUSH.2460 is 52”
FPSFLUSH.2448 24” 40” $430
FPSFLUSH.2454 24” 46” $463
FPSFLUSH.2460 24” 52” $497
FPSFLUSH.2466 24” 58” $531
FPSFLUSH.2472 24” 64” $565
PART # HEIGHT WIDTH LIST NOTES
FPSGAP.2442 24” 34” $398 With 1” gap at back of worksurface for cord/wire management.
Example:
1. Actual width of FPSGAP.2460 is 52”
FPSGAP.2448 24” 40” $430
FPSGAP.2454 24” 46” $463
FPSGAP.2460 24” 52” $497
FPSGAP.2466 24” 58” $531
FPSGAP.2472 24” 64” $565
DESCRIPTION SPECIFICATION OPTIONS
Work Surface mounted fabric covered privacy screen
product #: see charts belowPaint (Brackets): CW, BU, SVfabric: see page 4
NOTES ORDER EXAMPLE
Actual screen is shorter than the worktop.
Example: FPSFLUSH.2448 for use on 46”/48” width table, actual width of screen is 40”
product #: FPSFLUSH.2442 brackets: SV, Silver fabric: PF-701-01, Terrian, Cloud
Fabric Privacy Screen - Flush
Fabric Privacy Screen - with Wire Management Gap
Friant & Associates | www.friant.com
85
SYSTEM 1 & 2
STO
RA
GE
Privacy Screen, Marker Board
PART # HEIGHT WIDTH LIST NOTES
FMPSFLUSH.2442 24” 34” $540• Privacy screen sits flush with the back
of the worktop.
• Privacy screen is 8” shorter than free standing top width and 6” shorter than a worksurface from a paneled system.
Example:
1. Actual width of FMPSFLUSH.2460 is 52”
FMPSFLUSH.2448 24” 40” $618
FMPSFLUSH.2454 24” 46” $697
FMPSFLUSH.2460 24” 52” $775
FMPSFLUSH.2466 24” 58” $854
FMPSFLUSH.2472 24” 64” $993
PART # HEIGHT WIDTH LIST NOTES
FMPSGAP.2442 24” 34” $540 • With 1” gap at back of worksurface for cord/wire management.
Example:
1. Actual width of FMPSGAP.2460 is 52”
FMPSGAP.2448 24” 40” $618
FMPSGAP.2454 24” 46” $697
FMPSGAP.2460 24” 52” $775
FMPSGAP.2466 24” 58” $854
FMPSGAP.2472 24” 64” $933
DESCRIPTION SPECIFICATION OPTIONS
Work Surface mounted marker board privacy screen
product #: see charts belowPaint (Brackets): CW, BU, SV
NOTES ORDER EXAMPLE
To use a wire manager on your My-Hite table with a marker board privacy screen, you must order “with gap”.
Actual screen is shorter than the worktop.
Example: FPSFLUSH.2448 for use on 46”/48” width table, actual width of screen is 40”
product #: FPSFLUSH.2442 brackets: SV, Silver fabric: M15 Mousse
Marker Board Privacy Screen - Flush
Marker Board Privacy Screen - with Wire Management Gap
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
86
SYSTEM 1 & 2
STO
RA
GE
Privacy Screen, Laminate
PART # HEIGHT WIDTH LIST NOTES
FLPSFLUSH.2442 24” 34” $284• Privacy screen sits flush with the back
of the worktop.
• Privacy screen is 8” shorter than free standing top width and 6” shorter than a worksurface from a paneled system.
Example:
1. Actual width of FLPSFLUSH.2460 is 52”)
FLPSFLUSH.2448 24” 40” $316
FLPSFLUSH.2454 24” 46” $348
FLPSFLUSH.2460 24” 52” $380
FLPSFLUSH.2466 24” 58” $411
FLPSFLUSH.2472 24” 64” $443
PART # HEIGHT WIDTH LIST NOTES
FLPSGAP.2442 24” 34” $284 • With 1” gap at back of worksurface for cord/wire management.
Example:
1. Actual width of FLPSGAP.2460 is 52”
FLPSGAP.2448 24” 40” $316
FLPSGAP.2454 24” 46” $348
FLPSGAP.2460 24” 52” $380
FLPSGAP.2466 24” 58” $411
FLPSGAP.2472 24” 64” $443
DESCRIPTION SPECIFICATION OPTIONS
Work Surface mounted laminate privacy screen
product #: see charts belowPaint (Brackets): CW, BU, SVfinish: see page 5
NOTES ORDER EXAMPLE
To use a wire manager on your My-Hite table with a laminate privacy screen, you must order “with gap”.
Actual screen is shorter than the worktop.
Example: FPSFLUSH.2448 for use on 46”/48” width table, actual width of screen is 40”
product #: FPSFLUSH.2442 brackets: SV, Silver fabric: M15 Mousse
Laminate Privacy Screen - Flush
Laminate Privacy Screen - with Wire Management Gap
Friant & Associates | www.friant.com
87
SYSTEM 1 & 2
STO
RA
GE
DESCRIPTION
Storage with drawers.
NOTES• Square drawer front.• Order side-to-side file bars• Specify pull when ordering• Designer pull has color options: Specify
color when ordering. (See page 9)• Bar Pull will be shipped in box on ALL
orders, Premium Pulls will ship separately
SPECIFICATION OPTIONSproduct #: see charts belowfinish: LG Light Gray, MT Medium Tone, DT Dark Tonepull: see page 9
ORDER EXAMPLEproduct #: FPEDSQP.BBF-METfinish: LGpull: Wedge, +75 (see upcharge below)
Pedestals
BOX / BOX / FILEPEDESTAL
FILE / FILEPEDESTAL
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FPEDSQP.BBF-MET 27" 15" 20" 56 $530 Supporting metal pedestal with lock, without top cap. Attaches to the underside of a worksurface.
Order side to side file bars
Specify pull when ordering
Designer pull has color options: Specify color when ordering. (see page 9)
WEDGE, DESIGNER OR SLANT PULL + $75
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FPEDSQP.FF-MET 27" 15" 20" 53 $530 Supporting metal pedestal with lock, without top cap. Attaches to the underside of a worksurface.
Order side to side file bars
Specify pull when ordering
Designer pull has color options: Specify color when ordering. (see page 9)
WEDGE, DESIGNER OR SLANT PULL + $50
BOX / FILEPEDESTAL MOBILE
PART # HEIGHT WIDTH DEPTH WT.
(LBS)
PRICE NOTES
FPEDSQP.BF-MOB-MET 22"w 15" 20" 85 $581 Free-standing mobile pedestal with lock and with top cap.
Order side to side file bars
Specify pull when ordering
Designer pull has color options: Specify color when ordering. (see page 9)
WEDGE, DESIGNER OR SLANT PULL + $50
PEDESTAL
PULL OPTIONS
Designer Pull• Cloud White/Red• Cloud White/Green• Cloud White/Grey
Wedge PullBar Pull Slant Pull
DEFAULT PULL PULLS REQUIRING UPCHARGE
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
88
SYSTEM 1 & 2
STO
RA
GE
Pedestals continued
BOX / BOX / FILEPEDESTAL MOBILE
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FPEDSQP.BBF-MOB-MET 27.25" 15" 20" 85 $689 Free-standing mobile pedestal with lock and with top cap.
Order side to side file bars
Specify pull when ordering
Designer pull has color options: Specify color when ordering. (see page 9)
WEDGE, DESIGNER OR SLANT PULL + $75
FILE / FILEPEDESTAL MOBILE
BOX / FILE PEDESTAL MOBILE CUSHION
SIDE-TO-SIDEFILE BARS
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FPEDSQP.FF-MOB-MET 27.25" 15" 20" 76 $689 Free-standing mobile pedestal with lock and with top cap.
Order side to side file bars
Specify pull when ordering
Designer pull has color options: Specify color when ordering. (see page 9)
WEDGE, DESIGNER OR SLANT PULL + $50
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FPEDSQ.CUSH 1.75" 15" 20" — $265 For Box/File mobile pedestal only.
If cushion is placed on a full height mobile pedestal, it will not fit under a worksurface.
Passage and Terrain fabrics can not be used on mobile cushions. (See page 4)
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FSSB — — — 1 $16 Side-to-side File Bars for filing letter or legal size folders.
Order one per file drawer.
Finish: Black.
Friant & Associates | www.friant.com
89
SYSTEM 1 & 2
STO
RA
GE
DESCRIPTION
Storage with drawers.
NOTES• Free-standing 3- and 4-Drawer lateral files
must be bolted together or bolted to a wall.• Specify pull when ordering• Designer pull has color options: Specify
color when ordering. (See page 9)• Bar Pull will be shipped in box on ALL
orders, Premium Pulls will ship separately
SPECIFICATION OPTIONS
product #: see charts belowfinish: LG Light Gray, MT Medium Tone, DT Dark Tone (metal, painted finish)pull: (See page 9)
ORDER EXAMPLE
product #: FLFSQP-2-30-METfinish: LGpull: Wedge, +75 (see upcharge below)
Lateral Files
2 DRAWERLATERAL FILES
FREE-STANDING3-DRAWER LATERALFILES WITH TOP CAP
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FLFSQP-2-30-MET 27.5" 30" 20" 103 $950 Supporting lateral file with lock and finished top cap.
Order front to back file bars.
Order counterweight to convert to free-standing lateral file
Specify pull when ordering
Designer pull has color options: Specify color when ordering. (see page 9)
FLFSQP-2-36-MET 27.5" 36" 20" 123 $1,152
FLFSQP-2-42-MET 27.5" 42" 20" 151 $1,180
WEDGE, DESIGNER OR SLANT PULL + $50
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FLFSQP-3-30-MET 40" 30" 20" 121 $1,230 Supporting lateral file with lock and finished top cap.
Order front to back file bars.
Free-standing lateral files must be bolted to a wall or bolted together.
Specify pull when ordering
Designer pull has color options: Specify color when ordering. (see page 9)
FLFSQP-3-36-MET 40" 36" 20" 151 $1,389
FLFSQP-3-42-MET 40" 42" 20" 181 $1,511
WEDGE, DESIGNER OR SLANT PULL + $75
LATERAL
PULL OPTIONS
Designer Pull• Cloud White/Red• Cloud White/Green• Cloud White/Grey
Wedge PullBar Pull Slant Pull
DEFAULT PULL PULLS REQUIRING UPCHARGE
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
90
SYSTEM 1 & 2
STO
RA
GE
FREE-STANDING4-DRAWER LATERALFILES WITH TOP CAP
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FLFSQP-4-30-MET 51.5" 30" 20" 173 $1,558 Supporting lateral file with lock and finished top cap.
Order front to back file bars.
Free-standing lateral files must be bolted to a wall or bolted together.
Specify pull when ordering
Designer pull has color options: Specify color when ordering. (see page 9)
FLFSQP-4-36-MET 51.5" 36" 20" 196 $1,712
FLFSQP-4-42-MET 51.5" 42" 20" 241 $1,871
WEDGE, DESIGNER OR SLANT PULL +$100
LATERAL FILECOUNTERWEIGHT
FRONT-TO-BACKFILE BARS
PART # USAGE WT. (LBS) PRICE NOTES
FLFCW-30 use with 30” W lateral file 23 $53 Attaches securely to the inside back of the lateral file.
Includes one 20 lb counterweight Includes two 20 lb counterweights, for a total of 40 lbs of counterweight
FLFCW-36 use with 36” W lateral file 46 $80
FLFCW-42 use with 42” W lateral file 46 $80
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FFB 3/8" 1 3/16" 15 11/16" 1 $21 Front to back file bars.
Package of two.
Order one package of two per drawer.
Color: Black.
***** *
**
Lateral Files continued
Friant & Associates | www.friant.com
91
SYSTEM 1 & 2
STO
RA
GE
Pulls Lateral
WEDGE PULL FOR LATERAL
DESIGNER PULL FOR LATERAL
PART # WT. (LBS) LIST NOTES
WEDGE-PULL-244 — $25 Wedge Pull for Lateral
PART # WT. (LBS) LIST NOTES
DESIGNER-PULL-250-RED — $25 Designer Pull is CW (Cloud White) with non-slip color trim on underside. Trim available in 3 colors: Red, Green, and Grey
DESIGNER-PULL-250-GREEN — $25
DESIGNER-PULL-250-GREY — $25
SLANT PULL FOR LATERAL
PART # WT. (LBS) LIST NOTES
SLANT-PULL-244 — $25 Slant Pull for Lateral
DESCRIPTION SPECIFICATION OPTIONS
3 different pull options to choose from product #: see charts belowpull: see charts below
NOTES ORDER EXAMPLE
• Wedge Pull for Lateral• Designer pull has color options: specify
color when ordering. (See chart below) • Slant Pull for Lateral
product #: WEDGE-PULL-244pull: Wedge
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
92
SYSTEM 1 & 2
STO
RA
GE
Pulls Pedestal
WEDGE PULLFOR PEDESTAL
DESIGNER PULL FOR PEDESTAL
PART # WT. (LBS) LIST NOTES
WEDGE-PULL-167 — $25 Wedge Pull for Pedestal
PART # WT. (LBS) LIST NOTES
DESIGNER-PULL-250-RED — $25 Designer Pull is CW (Cloud White) with non-slip color trim on underside. Trim available in 3 colors: Red, Green, and Grey
DESIGNER-PULL-250-GREEN — $25
DESIGNER-PULL-250-GREY — $25
SLANT PULLFOR PEDESTAL
PART # WT. (LBS) LIST NOTES
SLANT-PULL-167 — $25 Slant Pull for Pedestal
DESCRIPTION SPECIFICATION OPTIONS
3 different pull options to choose from product #: see charts belowpull: see charts below
NOTES ORDER EXAMPLE
• Wedge Pull for Pedestal• Designer pull has color options: specify
color when ordering. (See chart below) • Slant Pull for the Pedestal
product #: DESIGNER-PULL-250-REDpull: Designer Pull, RED
Friant & Associates | www.friant.com
SYSTEM 1 & 2
AC
CE
SSO
RIE
S
93
DESCRIPTION
Workstation accessories.
NOTES
SPECIFICATION OPTIONS
product #: see charts belowfinish: LG Light Gray, MT Medium Tone, DT Dark Tone (metal, painted finish)
ORDER EXAMPLE
product #: FTB.24finish: MT
Accessories
TOOL BARS
FLAT PAPER TRAY
VERTICAL SINGLE TRAY
VERTICAL TRIPLE TRAY
CARPET GRIPPER
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FTB.24 3.5" 24" 0.75" 2 $80 Attaches to a panel of same width.
Mounting hardware included.
FTB.30 3.5" 30" 0.75" 2 $85
FTB.36 3.5" 36" 0.75" 3 $90
FTB.42 3.5" 42" 0.75" 3 $95
FTB.48 3.5" 48" 0.75" 4 $101
FTB.60 3.5" 60" 0.75" 5 $117
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FFPT 3" 10" 12" 2 $74 Order tool bar separately.
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FVST 8" 4" 12" 2 $74 Order tool bar separately.
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FVTT 11" 12" 12" 4 $90 Order tool bar separately.
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F2CG — 2.125" — 0.25 $5 Plastic Gripper fits onto the adjustable glides of panel.
Finish: Black
Do not use on hard surface flooring.
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 1 & 2
AC
CE
SSO
RIE
S
94
DESCRIPTION
All Friant Pedestals, Lateral Files, and Overhead Cabinets can be keyed-alike.
NOTES
• Keyed-Alike Lock Cores are sold in sets of 4.
• Each set includes four Lock Cores, each with two keys, all with the same lock number.
• One Lock Core Removal Key is shipped with every order.
• Additional Lock Core Removal Keys and Master Keys are also available.
SPECIFICATION OPTIONS
product #: see charts below
ORDER EXAMPLE
product #: FLCKA
Keyed-Alike Information
KEYED-ALIKE LOCKS PART # DESCRIPTION PRICE
FLCKA-4 Lock Core Keyed-Alike (set of 4) $100
FLCKA-6 Lock Core Keyed-Alike (set of 6) $100
FCK Lock Core Removal Key $15
FMK Lock Core Master Key $15
PART # HEIGHT WIDTH DEPTH WT. (LBS) LIST NOTES
FMA-S — — — — $500 CW, SV or BU Finish
Includes attachment hardware for clamp, grommet and Verity track mount.
SINGLE MONITOR ARM
DUAL MONITOR ARM PART # HEIGHT WIDTH DEPTH WT. (LBS) LIST NOTES
FMA-D — — — — $725 CW, SV or BU Finish
Includes attachment hardware for clamp, grommet and Verity track mount.
Friant & Associates | www.friant.com
SYSTEM 1
PA
NE
LS
97
DESCRIPTION
Structural panel with laminate surfaces, painted top caps and trim, leveling glides.
NOTES
• Order connectors and finished ends separately.
SPECIFICATION OPTIONS
product #: see charts belowtrim and top cap finish: LG Light Gray, MT Medium Tone, DT Dark Tonelaminate finish (side 1): see page 5laminate finish (side 2, if applicable): see page 5
ORDER EXAMPLE
product #: F2 PGPA.5324Ntrim and top cap finish: LGlaminate finish (side 1): 7909-60 Light Maplelaminate finish (side 2): 7040A-60 Mahogany
27” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F1HSPA.2712N 27" 12" 2" 18 $302
F1HSPA.2718N 27" 18" 2" 20 $311
F1HSPA.2724N 27" 24" 2" 21 $319
F1HSPA.2730N 27" 30" 2" 24 $348
F1HSPA.2736N 27" 36" 2" 27 $377
F1HSPA.2742N 27" 42" 2" 30 $408
F1HSPA.2748N 27" 48" 2" 34 $439
F1HSPA.2760N 27" 60" 2" 40 $552
34” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F1HSPA.3412N 34" 12" 2" 22 $315
F1HSPA.3418N 34" 18" 2" 24 $323
F1HSPA.3424N 34" 24" 2" 26 $332
F1HSPA.3430N 34" 30" 2" 27 $363
F1HSPA.3436N 34" 36" 2" 31 $393
F1HSPA.3442N 34" 42" 2" 36 $425
F1HSPA.3448N 34" 48" 2" 39 $458
F1HSPA.3460N 34" 60" 2" 46 $576
42” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F1HSPA.4212N 42" 12" 2" 25 $324
F1HSPA.4218N 42" 18" 2" 26 $335
F1HSPA.4224N 42" 24" 2" 29 $347
F1HSPA.4230N 42" 30" 2" 33 $391
F1HSPA.4236N 42" 36" 2" 38 $437
F1HSPA.4242N 42" 42" 2" 41 $482
F1HSPA.4248N 42" 48" 2" 47 $530
F1HSPA.4260N 42" 60" 2" 53 $664
Hard-Surface Panel
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 1
PA
NE
LS
98
48” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F1HSPA.4812N 48" 12" 2" 26 $351
F1HSPA.4818N 48" 18" 2" 30 $358
F1HSPA.4824N 48" 24" 2" 32 $367
F1HSPA.4830N 48" 30" 2" 38 $412
F1HSPA.4836N 48" 36" 2" 41 $465
F1HSPA.4842N 48" 42" 2" 44 $514
F1HSPA.4848N 48" 48" 2" 51 $563
F1HSPA.4860N 48" 60" 2" 57 $706
57” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F1HSPA.5712N 57" 12" 2" 28 $359
F1HSPA.5718N 57" 18" 2" 32 $379
F1HSPA.5724N 57" 24" 2" 36 $416
F1HSPA.5730N 57" 30" 2" 42 $458
F1HSPA.5736N 57" 36" 2" 47 $510
F1HSPA.5742N 57" 42" 2" 51 $559
F1HSPA.5748N 57" 48" 2" 58 $606
F1HSPA.5760N 57" 60" 2" 66 $747
62” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F1HSPA.6212N 62" 12" 2" 30 $367
F1HSPA.6218N 62" 18" 2" 34 $401
F1HSPA.6224N 62" 24" 2" 40 $437
F1HSPA.6230N 62" 30" 2" 46 $488
F1HSPA.6236N 62" 36" 2" 51 $540
F1HSPA.6242N 62" 42" 2" 57 $593
F1HSPA.6248N 62" 48" 2" 64 $646
F1HSPA.6260N 62" 60" 2" 74 $810
80” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F1HSPA.8012N 80" 12" 2" 38 $421
F1HSPA.8018N 80" 18" 2" 41 $463
F1HSPA.8024N 80" 24" 2" 50 $507
F1HSPA.8030N 80" 30" 2" 58 $571
F1HSPA.8036N 80" 36" 2" 65 $629
F1HSPA.8042N 80" 42" 2" 73 $687
F1HSPA.8048N 80" 48" 2" 81 $747
F1HSPA.8060N 80" 60" 2" 86 $936
Friant & Associates | www.friant.com
SYSTEM 1
PA
NE
LS
99
DESCRIPTION
Structural panel with fabric surfaces, painted top caps and trim, leveling glides.
NOTES
• Order connectors and finished ends separately.
• Standard fabric application for panels 67” and below is horizontal application. Panels taller than 67” are only available in vertical application. When ordering panels 67” and below to match a panel taller than 67”, specify vertical application.
SPECIFICATION OPTIONS
product #: see charts belowtrim and top cap finish: LG Light Gray, MT Medium Tone, DT Dark Tonefabric (side 1): see page 4fabric (side 2, if applicable): see page 4
ORDER EXAMPLE
product #: F1FAPA.2712Ntrim and top cap finish: LGfabric (side 1): PF501-1 Sticks - Smokefabric (side 2): PF501-2 Sticks - Almond
27” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F1FAPA.2712N 27" 12" 2" 18 $257
F1FAPA.2718N 27" 18" 2" 20 $264
F1FAPA.2724N 27" 24" 2" 21 $272
F1FAPA.2730N 27" 30" 2" 24 $300
F1FAPA.2736N 27" 36" 2" 27 $324
F1FAPA.2742N 27" 42" 2" 30 $349
F1FAPA.2748N 27" 48" 2" 34 $374
F1FAPA.2760N 27" 60" 2" 40 $459
34” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F1FAPA.3412N 34" 12" 2" 22 $267
F1FAPA.3418N 34" 18" 2" 24 $276
F1FAPA.3424N 34" 24" 2" 26 $284
F1FAPA.3430N 34" 30" 2" 27 $313
F1FAPA.3436N 34" 36" 2" 31 $338
F1FAPA.3442N 34" 42" 2" 36 $364
F1FAPA.3448N 34" 48" 2" 39 $390
F1FAPA.3460N 34" 60" 2" 46 $478
42” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F1FAPA.4212N 42" 12" 2" 25 $275
F1FAPA.4218N 42" 18" 2" 26 $282
F1FAPA.4224N 42" 24" 2" 29 $290
F1FAPA.4230N 42" 30" 2" 33 $328
F1FAPA.4236N 42" 36" 2" 38 $366
F1FAPA.4242N 42" 42" 2" 41 $404
F1FAPA.4248N 42" 48" 2" 47 $443
F1FAPA.4260N 42" 60" 2" 53 $542
Fabric Covered Panel
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 1
PA
NE
LS
100
48” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F1FAPA.4812N 48" 12" 2" 26 $290
F1FAPA.4818N 48" 18" 2" 30 $300
F1FAPA.4824N 48" 24" 2" 32 $310
F1FAPA.4830N 48" 30" 2" 38 $351
F1FAPA.4836N 48" 36" 2" 41 $392
F1FAPA.4842N 48" 42" 2" 44 $435
F1FAPA.4848N 48" 48" 2" 51 $477
F1FAPA.4860N 48" 60" 2" 57 $582
57” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F1FAPA.5712N 57" 12" 2" 28 $300
F1FAPA.5718N 57" 18" 2" 32 $314
F1FAPA.5724N 57" 24" 2" 36 $338
F1FAPA.5730N 57" 30" 2" 42 $381
F1FAPA.5736N 57" 36" 2" 47 $423
F1FAPA.5742N 57" 42" 2" 51 $466
F1FAPA.5748N 57" 48" 2" 58 $509
F1FAPA.5760N 57" 60" 2" 66 $622
62” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F1FAPA.6212N 62" 12" 2" 30 $308
F1FAPA.6218N 62" 18" 2" 34 $337
F1FAPA.6224N 62" 24" 2" 40 $366
F1FAPA.6230N 62" 30" 2" 46 $410
F1FAPA.6236N 62" 36" 2" 51 $454
F1FAPA.6242N 62" 42" 2" 57 $497
F1FAPA.6248N 62" 48" 2" 64 $541
F1FAPA.6260N 62" 60" 2" 74 $661
80” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F1FAPA.8012N 80" 12" 2" 38 $349 Standard fabric application for panels 67” and below is horizontal application. Panels taller than 67” are only available in vertical application. When ordering panels 67” and below to match a panel taller than 67”, specify vertical application.
F1FAPA.8018N 80" 18" 2" 41 $387
F1FAPA.8024N 80" 24" 2" 50 $425
F1FAPA.8030N 80" 30" 2" 58 $475
F1FAPA.8036N 80" 36" 2" 65 $527
F1FAPA.8042N 80" 42" 2" 73 $576
F1FAPA.8048N 80" 48" 2" 81 $625
F1FAPA.8060N 80" 60" 2" 86 $774
Friant & Associates | www.friant.com
SYSTEM 1
PA
NE
LS
101
DESCRIPTION
Sound reducting, structural panel with fabric surfaces, painted top cap and trim, leveling glides.
NOTES
• Order connectors and finished ends separately.
• Standard fabric application for panels 67” and below is horizontal application. Panels taller than 67” are only available in vertical application. When ordering panels 67” and below to match a panel taller than 67”, specify vertical application.
• Passage and Terrain are not available on acoustical panels.
SPECIFICATION OPTIONS
product #: see charts belowtrim and top cap finish: LG Light Gray, MT Medium Tone, DT Dark Tonefabric (side 1): see page 4fabric (side 2, if applicable): see page 4
ORDER EXAMPLE
product #: F2ACPA.4812Ntrim and top cap finish: LGfabric (side 1): PF401-1 Silky - Naturalfabric (side 2): PF401-2 Silky - Parids
48” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F1ACPA.4812N 48" 12" 2" 26 $393
F1ACPA.4818N 48" 18" 2" 30 $417
F1ACPA.4824N 48" 24" 2" 32 $441
F1ACPA.4830N 48" 30" 2" 38 $480
F1ACPA.4836N 48" 36" 2" 41 $520
F1ACPA.4842N 48" 42" 2" 44 $557
F1ACPA.4848N 48" 48" 2" 51 $595
F1ACPA.4860N 48" 60" 2" 57 $714
57” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F1ACPA.5712N 57" 12" 2" 28 $405
F1ACPA.5718N 57" 18" 2" 32 $426
F1ACPA.5724N 57" 24" 2" 36 $447
F1ACPA.5730N 57" 30" 2" 42 $487
F1ACPA.5736N 57" 36" 2" 47 $525
F1ACPA.5742N 57" 42" 2" 51 $563
F1ACPA.5748N 57" 48" 2" 58 $602
F1ACPA.5760N 57" 60" 2" 66 $722
Acoustical Panel
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
SYSTEM 1
PA
NE
LS
102
62” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F1ACPA.6212N 62" 12" 2" 30 $417
F1ACPA.6218N 62" 18" 2" 34 $436
F1ACPA.6224N 62" 24" 2" 40 $455
F1ACPA.6230N 62" 30" 2" 46 $491
F1ACPA.6236N 62" 36" 2" 51 $529
F1ACPA.6242N 62" 42" 2" 57 $569
F1ACPA.6248N 62" 48" 2" 64 $610
F1ACPA.6260N 62" 60" 2" 74 $728
80” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F1ACPA.8012N 80" 12" 2" 38 $478 Standard fabric application for panels 67” and below is horizontal application. Panels taller than 67” are only available in vertical application. When ordering panels 67” and below to match a panel taller than 67”, specify vertical application.
F1ACPA.8018N 80" 18" 2" 41 $500
F1ACPA.8024N 80" 24" 2" 50 $522
F1ACPA.8030N 80" 30" 2" 58 $571
F1ACPA.8036N 80" 36" 2" 65 $633
F1ACPA.8042N 80" 42" 2" 73 $675
F1ACPA.8048N 80" 48" 2" 81 $720
F1ACPA.8060N 80" 60" 2" 86 $875
Friant & Associates | www.friant.com
SYSTEM 1
PA
NE
LS
103
DESCRIPTION
Structural panel with fabric covered lower surfaces and 14” high acrylic top section, painted top cap and leveling glides.
NOTES
• Partial-glazed panel.• Order connectors and finished ends
separately.
SPECIFICATION OPTIONS
product #: see charts belowtrim and top cap finish: LG Light Gray, MT Medium Tone, DT Dark Toneside panel glazing: TR Clear, FR Frostedfabric (side 1): see page 4fabric (side 2, if applicable): see page 4
ORDER EXAMPLE
product #: F1PGPA.4824Ntrim and top cap finish: LGside panel glazing: TRfabric (side 1): PF101-1 Slide - Caramelfabric (side 2): PF101-6 Slide - Vintage
48” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F1 PGPA.4824N 48" 24" 2" 37 $533
F1 PGPA.4830N 48" 30" 2" 41 $581
F1 PGPA.4836N 48" 36" 2" 47 $702
F1 PGPA.4842N 48" 42" 2" 54 $739
F1 PGPA.4848N 48" 48" 2" 61 $809
F1 PGPA.4860N 48" 60" 2" 73 $933
62” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F1 PGPA.6224N 62" 24" 2" 42 $590
F1 PGPA.6230N 62" 30" 2" 50 $640
F1 PGPA.6236N 62" 36" 2" 56 $765
F1 PGPA.6242N 62" 42" 2" 62 $800
F1 PGPA.6248N 62" 48" 2" 71 $875
F1 PGPA.6260N 62" 60" 2" 82 $1,015
80” HIGH
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE
F1 PGPA.8024N 80" 24" 2" 49 $665
F1 PGPA.8030N 80" 30" 2" 57 $718
F1 PGPA.8036N 80" 36" 2" 65 $854
F1 PGPA.8042N 80" 42" 2" 73 $894
F1 PGPA.8048N 80" 48" 2" 83 $972
F1 PGPA.8060N 80" 60" 2" 97 $1,137
Glazed Panel
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
104
SYSTEM 1
PA
NE
LS H
AR
DW
AR
E
DESCRIPTION
Hardware for panels.
NOTES
SPECIFICATION OPTIONS
product #: see charts belowfinish: LG Light Gray, MT Medium Tone, DT Dark Tone
ORDER EXAMPLE
product #: FDR.27finish: LG
Panel Hardware
DRAW ROD
DRAW RODCHANGE OF HEIGHT
2-WAY 90° CONNECTORPOST HARD SURFACE
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FDR.27 27" 2" — 1 $15 Rod and block assembly connects two panels at 180° (straight line).
Color: DT Dark Tone.
FDR.34 34" 2" — 1 $16
FDR.42 42" 2" — 1 $16
FDR.48 48" 2" — 1 $17
FDR.57 57" 2" — 1 $17
FDR.62 62" 2" — 1 $17
FDR.80 80" 2" — 2 $18
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FDRCH.27 27" 2" — 1 $32 Rod and block assembly connects two panels at 180° (straight line) when the panels are of different heights.
Order the height of the shorter panel.
Color: DT Dark Tone.
FDRCH.34 34" 2" — 1 $32
FDRCH.42 42" 2" — 1 $32
FDRCH.48 48" 2" — 1 $37
FDRCH.57 57" 2" — 1 $37
FDRCH.62 62" 2" — 1 $37
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F12W.27 27" 3.5" — 3 $103 Connects two panels at 90°.
F12W.34 34" 3.5" — 4 $103
F12W.42 42" 3.5" — 5 $113
F12W.48 48" 3.5" — 6 $120
F12W.57 57" 3.5" — 7 $128
F12W.62 62" 3.5" — 7 $130
F12W.80 80" 3.5" — 8 $147
Friant & Associates | www.friant.com
105
SYSTEM 1
PA
NE
LS H
AR
DW
AR
E
4-WAY 90° CONNECTORPOST HARD SURFACE
FINISHED END
FINISHED END,CHANGE OF HEIGHT
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F14W.27 27" 3.5" — 5 $196 Connects four panels at 90°.
F14W.34 34" 3.5" — 6 $204
F14W.42 42" 3.5" — 7 $217
F14W.48 48" 3.5" — 8 $237
F14W.57 57" 3.5" — 9 $260
F14W.62 62" 3.5" — 10 $262
F14W.80 80" 3.5" 10 $293
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F1FE.27 27" 2" — 1 $48 Finishes the vertical end of a panel at the end of a panel run.
F1FE.34 34" 2" — 2 $48
F1FE.42 42" 2" — 2 $53
F1FE.48 48" 2" — 2 $53
F1FE.57 57" 2" — 2 $53
F1FE.62 62" 2" — 2 $58
F1FE.80 80" 2" — 3 $64
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FFECH 32" 2" — 1 $18 Finishes the exposed end of a panel or connector at a change of height location.
Includes finished end trim and mounting hardware.
May be cut to the appropriate length.
Panel Hardware (cont’d)
3-WAY 90° CONNECTORPOST HARD SURFACE
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
F13W.27 27" 3.5" — 5 $156 Connects three panels at 90°.
F13W.34 34" 3.5" — 5 $162
F13W.42 42" 3.5" — 6 $174
F13W.48 48" 3.5" — 7 $184
F13W.57 57" 3.5" — 8 $200
F13W.62 62" 3.5" — 8 $202
F13W.80 80" 3.5" — 9 $230
The products listed in this pricer are manufactured by Friant & Associates, LLC. Any reference or similarity to the products of an original equipment manufacturer (O.E.M.) is not an expression of their approval or authorization.
106
SYSTEM 1
PA
NE
LS H
AR
DW
AR
E
WALL START
WALL STRIP
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FWSTA.27 27" 2" 1" 1 $48 Connects panel to structural wall or column.
Can also connect equal height panels at 180° panel width.
Order one additional Draw Rod of the same height.
FWSTA.34 34" 2" 1" 2 $51
FWSTA.42 42" 2" 1" 3 $51
FWSTA.48 48" 2" 1" 3 $51
FWSTA.57 57" 2" 1" 3 $53
FWSTA.62 62" 2" 1" 3 $53
FWSTA.80 80" 2" 1" 4 $58
PART # HEIGHT WIDTH DEPTH WT. (LBS) PRICE NOTES
FWSST.60 60" — — 3 $58 Attaches to structural wall to hang worksurfaces and/or components.
Includes one wall strip.
FWSST.72 72" — — 3 $66
FWSST.84 84" — — 4 $66
Mark Fuqua 410-215-7356 [email protected] www.MDcommercial.com
MarylandCommercial Design Inspired, Value Based Commercial Furnishing
VERY IMPORTANT INFORMATION REGARDING
ATTACHED SYSTEM 2 RESOURCE.
Friant resources contain LIST PRICES. Maryland Commercial sells for a
small fraction of list price. However...
• We are not allowed to share our net pricing on a public forum (like our
website or direct mail). The MAP pricing (Minimum Advertised Price)
for Friant is 50% of list...we sell for much less (we discount way more
than 50%).
• There are three easy ways to get the net pricing for System 2:
1. Send me an email and ask for SYSTEM 2 NET PRICING. My email
address is [email protected]
2. Call me and ask for SYSTEM 2 NET PRICING @ 410-215-7356.
3. Sign up for an account on our website:
www.mdcommercial.com/Public-Facing/furniture/resource-
registration Registering is super easy. This will give you access to
resources for all 12 lines...Plus our Net Pricing Guide, which has
net pricing for all 12 Friant product lines.