VERSION 1.0...• CargoWise • ParcelCube In application mode (SPP) either directly connected to a...
Transcript of VERSION 1.0...• CargoWise • ParcelCube In application mode (SPP) either directly connected to a...
-
C190POS User GuideVERSION 1.0.1
Some features in this guide are unsupported in product
with SN prior 201xxxx
-
C190POS User Guide Version 1.0.1 | © 2020 ParcelTools Pty Ltd PAGE 2
Introduction 3
Getting Started 4 - 5
Using the C190DSK Cradle 6
User Shortcuts 7
System Settings 8
International Settings 9 - 10
Workflows 11
Data Format Suffix 12
Imperial/Inch Dimensioning Units and Precision with C190T-U Universal Tape 13
Metric Dimensioning Units and Precision with C190T-U Universal Tape 14
Dimensioning Units and Precision with C190T-C and CN Standard Tape 15
Supported Software 16
Contents
-
C190POS User Guide Version 1.0.1 | © 2020 ParcelTools Pty Ltd PAGE 3
Introduction
Setting Factory Default
Bluetooth Cradle Pairing Mode
Keyboard English
Send Option 1DIM
Data Format TAB
Source Prefix OFF
Units inches
Precision nearest whole
Reverse Tare Value 112
This guide provides comprehensive information for the setup, configuration and maintenance of the
C190POS Scanning-Dimensioning device and the C190DSK accessory. It contains shortcuts for end users,
configuration barcodes for system management, communication options, data and transmission formats,
dimensioning units and precision, and supported software information.
Also available for download at www.cubetape.com/downloads is the scan engine parameter
programming guide which provides complete guidance to programming the scan engine to meet
specific symbology requirements.
Factory default settings are:
About
Dip switches beneath cradle:
Default Mode (HID)
Application Mode (SPP)
1 2 3 4
ON
1 2 3 4
ON
http://www.cubetape.com/downloads
-
C190POS User Guide Version 1.0.1 | © 2020 ParcelTools Pty Ltd PAGE 4
1. Power ON: Hold down ‘m’ button for 2 seconds.
Power OFF: Hold down ‘m’ button for 5 seconds.
2. Cradle Install on PC: LED on cradle confirms power connection.
3. Connect Cubetape to Cradle: Scan Cradle Pairing Barcode to pair. Blue LED solid when connected.
C190POS is a precision measuring instrument and barcode scanner with a wide range of configurable
options including measurement units, precision and data formatting and will connect to most platforms
including Windows Android and iOS. Cubetape scanner dimensioners have factory defaults set for
common terminal, communication and measurement requirements. Settings can be changed by
scanning the barcodes in this guide with further options available at www.cubetape.com/downloads
Register your device at www.cubetape.com/register
For support email [email protected]
Getting Started
‘m’ Button
Cradle Pairing Barcode
Charging:
To charge battery place the device in the cradle.
Battery is charging when the charge LED is RED.
Battery is fully charged when the charge LED is off.
Battery Warning LED:
LED OFF: Battery between 40% - 100%.
LED Slow Flash: Battery between 20% - 40%.
LED Medium Flash: Battery between 10% - 20%.
LED Fast Flash: Battery below 10% recharge immediately.
Measuring Techniques:
1. Hook the tape end over the far edge of the package.
2. Align the tape exit to the near edge.
3. Press the ‘m’ button to record and transmit
the measurement.
1
3
2
Battery/Power Management:
For power management of USB devices when PC is in sleep mode:
https://www.top-password.com/blog/set-windows-to-power-on-off-usb-devices-in-sleep-mode/
Cradle
PC
USB Cable
CHARGE
BLUETOOTH
1 2 3
Fast flash: charge immediately
http://www.cubetape.com/downloadshttp://www.cubetape.com/registermailto:support%40cubetape.com?subject=C190POShttps://www.top-password.com/blog/set-windows-to-power-on-off-usb-devices-in-sleep-mode/
-
C190POS User Guide Version 1.0.1 | © 2020 ParcelTools Pty Ltd PAGE 5
Connect directly to PC (without cradle):
Scan Bluetooth Direct Mode (HID) barcode.
Open PC Settings/Add Bluetooth Device/Select Cubetape.
When LED is solid BLUE, Cubetape is paired.
Connect directly to Android Device (without cradle):
Scan Bluetooth Direct Mode (HID) barcode.
Open Android Device Settings/Add Bluetooth Device/Select Cubetape.
When LED is solid BLUE, Cubetape is paired.
Getting Started
BatterySleeve
Tape Cassette
Push in the direction of the arrow
Battery and Tape Compartments:
1. Remove the silicone rubber sleeve.
2. Slide the back cover open and remove it.
3. Remove the tape cassette or battery.
1 32
Register your device at www.cubetape.com/register
For support email [email protected]
Some features in this guide are unsupported in product with SN prior 201xxxx.
Bluetooth Direct Mode (HID)
http://www.cubetape.com/registermailto:support%40cubetape.com?subject=C190POS
-
C190POS User Guide Version 1.0.1 | © 2020 ParcelTools Pty Ltd PAGE 6
Using the C190DSK Cradle
The C190DSK Cradle functions as a charge station and a Bluetooth bridge. When connected to a PC in
default mode (HID), it allows data collected and transmitted by Cubetape to be inserted into the active
application where the cursor is located. Default mode uses a generic Windows driver so there is no
need to install a special driver.
When connected to a PC in application mode (SPP), data collected and transmitted by Cubetape is sent
to a virtual COM port on the PC. Windows needs a driver installed for this function. The driver is available
for download at www.cubetape.com/downloads in the drivers and utilities folder, and once installed the
entry in Windows Device Manager is as follows (note the assigned COM port number is variable).
Once the driver is installed, data can be received at the PC COM port by connecting an application
using the following setup options:
http://www.cubetape.com/downloads
-
C190POS User Guide Version 1.0.1 | © 2020 ParcelTools Pty Ltd PAGE 7
User Shortcuts
Resend last 3 dimensions
Resend
Insert US Pallet 48 x 40
US Pallet 48 x 40
Insert CHEP Pallet 117 x 117
CHEP Pallet 117 x 117
Insert UK Pallet 120 x 100
UK Pallet 120 x 100
Insert EURO Pallet 120 x 80
EURO Pallet 120 x 80
Add next 2 measurements (max 19.6 feet)
Add/Append
Reverse Tare ON for next measure
Reverse Tare ON
Create custom shortcuts by encoding values
and format characters to suit the application.
For example, to create a shortcut to insert 3
values “1200, 100, 50” into 3 adjacent fields
in a speadsheet, create and print a Code 128
symbology barcode with the following data:
“120010050
Custom 1200 x 100 x 50
-
C190POS User Guide Version 1.0.1 | © 2020 ParcelTools Pty Ltd PAGE 8
System Settings
Return C190POS Settings to Factory Defaults
Default Factory Setting
Return Scan Engine to C190POS Defaults
Scan Engine Factory Setup
Output Battery Level
Read Battery Level
-
C190POS User Guide Version 1.0.1 | © 2020 ParcelTools Pty Ltd PAGE 9
International Settings
European Decimal ON
EU Decimal ON
European Decimal OFF
EU Decimal OFF
Uses English Keyboard Layout in HID
Communications without Cradle
Direct English Keyboard
Uses French Keyboard Layout in HID
Communications without Cradle
Direct French Keyboard
Uses German Keyboard Layout in HID
Communications without Cradle
Direct German Keyboard
Uses Spanish Keyboard Layout in HID
Communications without Cradle
Direct Spanish Keyboard
Uses Italian Keyboard Layout in HID
Communications without Cradle
Direct Italian Keyboard
Uses Belgian Keyboard Layout
Communications without Cradle
Direct Belgian Keyboard
Uses Japanese Keyboard Layout in HID
Communications without Cradle
Direct Japanese Keyboard
-
C190POS User Guide Version 1.0.1 | © 2020 ParcelTools Pty Ltd PAGE 10
International Settings
Uses English Keyboard Layout in HID
Communications using the Cradle
Cradle English Keyboard
Uses French Keyboard Layout in HID
Communications using the Cradle
Cradle French Keyboard
Uses German Keyboard Layout in HID
Communications using the Cradle
Cradle German Keyboard
Uses Spanish Keyboard Layout in HID
Communications using the Cradle
Cradle Spanish Keyboard
Uses Italian Keyboard Layout in HID
Communications using the Cradle
Cradle Italian Keyboard
Uses Belgian Keyboard Layout
Communications using the Cradle
Cradle Belgian Keyboard
Uses Japanese Keyboard Layout in HID
Communications using the Cradle
Cradle Japanese Keyboard
-
C190POS User Guide Version 1.0.1 | © 2020 ParcelTools Pty Ltd PAGE 11
Workflows
Workflow 1DIM
Transmit single dimension
Workflow 1DIM
Workflow 3DIM
Transmit set of 3 dimensions
Workflow 3DIM
Separator = x
Separator x
Separator = X
Separator X
Separator = TAB
Separator TAB
Separator = CR
Separator CR
C190POS can be setup to send dimensions one at a time or in sets of three. These options are called
1DIM and 3DIM. 3DIM must be used with some shipping applications, and can be used anytime
as a user preference.
3DIM also allows configuration of the separator (‘X’ in the following 3DIM example string): 48X40X36.
-
C190POS User Guide Version 1.0.1 | © 2020 ParcelTools Pty Ltd PAGE 12
Data Format Suffix
Disable Suffix
Disable Suffix
Enable Suffix
Enable Suffix
Suffix = TAB
Suffix = TAB
Suffix = LF
Suffix = LF
Suffix = CR
Suffix = CR
Suffix = CRLF
Suffix = CRLF
Suffix = Space
Suffix = SP
Suffix = TABTAB
Suffix = TABTAB
Suffix = CRTAB (Systec Integration)
Suffix = CRTAB
Suffix = COMMA
Suffix = COMMA
-
C190POS User Guide Version 1.0.1 | © 2020 ParcelTools Pty Ltd PAGE 13
Imperial/Inch Dimensioning Units and Precision with C190T-U Universal Tape
Units = inches
Inches-U
Precision = nearest 1"
Nearest Whole
Precision = next 1"
Next Whole
Scan a unit barcode (inches) followed by a precision barcode (nearest or next whole) to set
dimensional output.
Note: Metrological certification in some jurisdictions dictates the units and precision to be used in
legal for trade transactions.
-
C190POS User Guide Version 1.0.1 | © 2020 ParcelTools Pty Ltd PAGE 14
Metric Dimensioning Units and Precision with C190T-U Universal Tape
Units = metres
Metres-U
Units = centimetres
Centimetres-U
Scan a unit barcode (metres or centimetres) to set dimensional output.
Note: Metrological certification in some jurisdictions dictates the units and precision to be used in
legal for trade transactions.
-
C190POS User Guide Version 1.0.1 | © 2020 ParcelTools Pty Ltd PAGE 15
Dimensioning Units and Precision with C190T-C and CN Standard Tape
Units = centimetres
Precision = nearest 1 cm
Nearest Whole
Units = inches
Inches-M
Precision = nearest 1 /2"
Halves
Precision = nearest 1"
Nearest Whole
Precision = next 1 "
Next Whole
Scan a unit barcode (inches or centimetres) followed by a precision barcode (nearest or next whole)
to set dimensional output.
Note: Metrological certification in some jurisdictions dictates the units and precision to be used in
legal for trade transactions.
-
C190POS User Guide Version 1.0.1 | © 2020 ParcelTools Pty Ltd PAGE 16
Supported Software
In default mode (HID) either directly connected to a host or via a cradle,
POS can insert data into the active application on the screen.
Live examples include:
• Pitney Bowes SendPRO Suite
• DHL Express Shipping Application
• FedEx Ship Manager
• Cubiscan/Q-bit
• PC Synergy-Postalmate
• Fastway Courier Application
• Unisys LMS
• CargoWise
• ParcelCube
In application mode (SPP) either directly connected to a host or via a cradle,
Cubetape is integrated with:
• OctoStatic
• OctoScantape
• CheckMate Windows Edition
• CheckMate Android Edition
• Dockmaster (Crown)
-
Disclaimer © 2020
ParcelTools Pty Ltd.
All rights reserved. Please read through the manual
carefully before using the product and operate
it according to the manual. It is advised that you
should keep this manual for future reference.
Do not disassemble the device or remove the
seal label from the device, doing so will void the
product warranty provided by ParcelTools.
All pictures in this manual are for reference only
and actual product may differ. Regarding to the
product modification and update, ParcelTools
have the right to make changes to any software
or hardware to improve reliability, function, or
design at any time without notice. The information
contained herein is subject to change without prior
notice. The products depicted in this manual may
include software copyrighted by ParcelTools or a
third party. The user, corporation or individual, shall
not duplicate, in whole or in part, distribute, modify,
decompile, disassemble, decode, reverse engineer,
rent, transfer or sublicense such software without
prior written consent from the copyright holders.
www.cubetape.com
http://www.cubetape.com
-
C190POS User Guide Version 1.0.1 | © 2020 ParcelTools Pty Ltd PAGE 18
Contents
Introduction 3
User Shortcuts 4
System Settings 5
Bluetooth Settings 6
International Settings 7 - 8
Workflows 9
Data Format Suffix 10 - 11
Data Format Prefix 12
Imperial/Inch Dimensioning Units and Precision with C190T-U Universal Tape 13
Metric Dimensioning Units and Precision with C190T-U Universal Tape 14
Dimensioning Units and Precision with C190T-C and CN Standard Tape 15
Advanced Configuration 16
Advanced Configuration System 17
Calibration and Reverse Tare 18 - 19
Bluetooth HID Speed Settings 20
Numeric Values 21 - 22
Firmware Update 23
Release Notes 24
Appendix 1: Configuration Barcodes 25
Appendix 2: Library 26- 27
CoverContentsIntroductionGetting StartedGetting StartedUsing the C190DSK CradleUser ShortcutsSystem SettingsInternational Settings International SettingsWorkflowsData Format SuffixImperial/Inch Dimensioning Units and Precision with C190T-U Universal TapeMetric Dimensioning Units and Precision with C190T-U Universal TapeDimensioning Units and Precision with C190T-C and CN Standard TapeSupported SoftwareDisclaimer