Vermeulen Python High Performance Wireropes Brochure UK

High Performance Wire Ropes

Member of the Elivesto Group

Moezelweg 1103198 LS Europoort, HollandHarbour 5596

PO Box 11433180 AC Rozenburg

T: +31 (0)181-250050F: +31 (0)181-261466

[email protected]

Potklei 69351 VS LeekIndustrial Area Leeksterveld

T: +31 (0)594-820209

[email protected]

Noord

EuropoortVermeulen

Vermeulen

We as Vermeulen B.V., a member of Elivesto Group and originated from a 1950’s ship supply company, nowadays specialize in the supply, manufacturing, servicing, testing and certification of a vast array of hoisting, shipsrigging and mooring equipment. In recent years, under the guidance and expertise of the founder and current owner Tom Vermeulen, the company has enjoyed vast expansion in terms of products, service, technology and clientele. This has resulted in the establishment of Elivesto Group in 2009 which has enabled Vermeulen B.V. to provide you with an even broader range of products and services in the industrial and maritime sectors via its other group members: - Tecmacon Structures B.V.- Dry Bulk Solutions B.V.- Vitalitas Recruitment & Secondment B.V.- Crystal Coating Technologies B.V.- Gloning Cranes Benelux B.V.

Through the years Vermeulen B.V. has built up a reputation as an innovating partner who has introduced a variety of revolutionary products applicable in many industries to its internationally operating clientele.

Our strategically located facilities in the port of Rotterdam (Europoort) and near the harbour of Groningen (Eemshaven) in Leek (Gr) ensure easy and rapid access to a variety of forwarding facilities.

Vermeulen BV has a team of professionals, a well-equipped workshop and spacious stores in which most of the product range is kept in stock. Quality control is ensured by our Lloyds Register accredited ISO-9001:2000, ISO-18001 (OHSAS) and EKH (Recognized Inspection Agencies for Lifting Equipment) certification. As a special service for our maritime affiliated customers we offer a Bureau Veritas Mode 1 certification in accordance with ILO 152. This tailor made service enables us to independently certify all lifting and rigging equipment for use on board vessels without the delays normally caused by the witnessing of surveyors.

Outlined in this brochure is an overview of a selected range of products from within our broader scope of supplies. For additional information we like to welcome you to our website www.elivesto.com from where you can browse the “Vermeulen Europoort” pages. For a specific advice you can always count on our expert staff who throughout the years have faithfully provided our clients with customized advice when choosing from our extensive range of products and services. We are available 24/7 by phone on +31 (0)181-250050.

Welcome to

Vermeulen BVyour supplier for all hoisting, shipsrigging and mooring equipment.

HIGH PERFORMANCE WIRE ROPES


Construction Rotation-resistant

Plastic coated core

CompactionDouble parallel closing

Total number of

wires

Load bearing

outer wires in outer strands

Fill factorOuter

strandsInner

strands

HOIST C 41xK7-EPWSC • • • 291 119 0,672

HOIST S 41xK7-EPWSC • • • 291 119 0,685

LIFT 39(W)xK6-KWSC • • • 226 90 0,714

CLASSIC 35 35(W)x7-WSC • 245 112 0,718

COMPAC 35 35(W)x7-WSC • • • 245 112 0,730

SUPER 8R 8x25F-EIWRC • 249 152 0,606

SUPER 8S 8x25F-EIWRC • • 249 152 0,667

SUPER 8C 8xK26WS-EIWRC • • 257 208 0,660

SUPER 8PC 8xK26WS-EIWRC • • 257 208 0,660

FLAMESHIELD 8 8x25F-IWRC 319 152 0,632

POWER 9R 9x19S/F-PIWRC • 268 / 358 171 0,718

POWER 9S 9xK19S/F-PIWRC • • 268 / 358 171 0,780

ULTRA S 10xK19S/F-PIWRC • • 298 / 362 190 0,800

MULTI 10xK19S-EIWRC • • • 265 190 0,606

Technical information

Applicationrecommendations

Hoist rope Pental rope Luffing rope Trolley rope

Closing rope

Erection rope

Telescopic rope Grap rope

Tower crane LIFTCOMPAC 35

SUPER 8R/CPOWER 9R/S

ULTRA SSUPER 8R/S/C SUPER 8R/C SUPER 8R/C

Self erecting crane

CLASSIC 35COMPAC 35 SUPER 8R/C SUPER 8R CLASSIC 35

COMPAC 35

Lattice boom crane

LIFTCOMPAC 35

SUPER 8R/CPOWER 9R/S

ULTRA SSUPER 8R/S/C

Mobile craneHOIST C

LIFTCOMPAC 35

POWER 9R/SULTRA S

Deck crane HOIST S/CLIFT

Offshore crane HOIST CCOMPAC 35 SUPER 8R/C

Floating crane HOIST S/CSUPER 8R/S/C SUPER 8R/C

Floating grab SUPER 8R/S/C SUPER 8R/S/C SUPER 8R/C

Container / ship to shore crane

SUPER 8R/S/PC SUPER 8R/C

Coal & ore unloader

SUPER 8R/C SUPER 8R/C SUPER 8C SUPER 8R/C SUPER 8R/C

Grab crane SUPER 8R/C SUPER 8R/C SUPER 8R/C SUPER 8R/C

Wall grabs SUPER 8R/S/C SUPER 8R/C

Shovel & drag excavators

SUPER 8R/S/C SUPER 8R/C

Skimmer SUPER 8R/S/CSUPER 8R/S/C

POWER 9SULTRA S

Overhead crane / electroic hoist

CLASSIC 35COMPAC 35

MULTISUPER 8R/C/PC

Steel mill crane FLAMESHIELD 8

High rack warehouse

POWER 9R/SULTRA S

Technical informationApplication recommendations



CHARACTERISTICS:

Python Super 8R is an eight strand rope with a plastic coated IWRC. The Filler construction provides an excellent combination of flexibility, longevity and abrasion resistance.

Due to its robust design, SUPER 8R is recommended for tough environmental and working conditions. SUPER 8R is neither rotation-resistant nor non-rotating.

FIELDS OF APPLICATION:SUPER 8 R is recommended as trolley rope, luffing/pendant rope a well as hoisting rope for:

• Portal and ship cranes• RTG• Floating, container, and harbour cranes

recommended D/d-ratio:swivel:

Nominal diameter[mm]

Mass weight[kg/100m]

Minimum breaking load[kN]

1770 N/mm² IPS 1960 N/mm² EIPS 2160 N/mm² EEIPS

10 42,00 75,1 83,2 91,6

11 51,00 90,8 100,5 110,9

12 61,00 108,1 119,7 131,9

13 72,00 126,9 140,5 154,8

14 82,00 147,1 162,9 179,5

15 95,00 168,9 187,0 206,1

16 108,00 192,1 212,7 234,5

17 123,00 216,9 240,2 264,8

18 137,00 243,2 269,3 296,8

19 153,00 271,0 300,1 330,7

20 169,00 300,2 332,4 366,4

22 205,00 363,3 402,3 443,3

24 243,00 432,3 478,7 527,6

26 285,00 507,4 561,9 619,2

28 331,00 588,4 651,6 718,2

30 380,00 675,6 748,1 824,3

32 432,00 768,7 851,2 938,0

34 488,00 867,7 960,9 1.058,9

36 548,00 972,8 1.077,2 1.187,1

38 610,00 1.083,9 1.200,2 1.322,6

40 676,00 1.201,0 1.329,9 1.465,6

42 745,00 1.344,1 1.466,2 1.615,8

44 817,00 1.453,2 1.609,2 1.773,3

46 894,00 1.588,3 1.758,8 1.938,2

48 973,00 1.729,4 1.915,0 2.110,5

50 1.056,00 1.876,6 2.078,0 2.289,1

52 1.142,00 2.029,6 2.247,5 2.476,9

Technical data

> 20

Super 8R Super 8R

Technical criteria

Number of strands 8 + IWRC

Number of wires 200 + IWRC

Load bearing outer wires 152

Manufacturing tolerance +2% / +4%

Fill factor 0,606

Available in Regular-/ Lang lay

Super 8R

Python Super 8R Python Super 8R



CHARACTERISTICS:

Python Super 8S is an eight strand High Performance Wire Rope with a plastic coated IWRC. The Filler construction provides an excellent combination of flexibility, longevity and abrasion resistance. Due to its robust design, SUPER 8S is recommended for tough environmental and working conditions. In comparison to standard 6x36 constructions, SUPER 8S has up to 30% higher breaking load.

The oval geometry outer strands of the rope allows for optimized distribution of pressure on drum and sheaves, resulting in reduced wear and abrasion.

SUPER 8S is neither rotation-resistant nor non-rotating.

FIELDS OF APPLICATION:

SUPER 8S is recommended as trolley rope, luffing/pendant rope a well as hoisting rope for:

• Portal and ship cranes• RTG• Floating, container, and harbour cranes

Technical criteria





Fill factor 0,667

Available in Regular-/ Lang layrecommended D/d-ratio:swivel:




1770 N/mm² IPS 1960 N/mm² EIPS 2160 N/mm² EEIPS

12 67,00 119,0 131,8 145,2

13 79,00 139,7 154,7 170,4

14 92,00 161,9 179,3 197,6

15 105,00 185,9 205,8 226,8

16 119,00 211,5 234,2 258,1

17 135,00 238,8 264,4 291,4

18 152,00 267,8 296,5 326,7

19 168,00 298,2 330,2 364,0

20 187,00 330,5 366,0 403,3

22 227,00 399,9 442,8 488,0

24 269,00 475,8 526,9 580,7

26 316,00 558,4 618,4 681,6

28 366,00 647,7 717,2 790,5

30 421,00 743,6 823,4 907,4

32 479,00 846,0 936,8 1.032,4

34 541,00 955,0 1.057,5 1.165,5

36 606,00 1.070,8 1.185,7 1.306,6

38 675,00 1.192,9 1.321,0 1.455,9

40 748,00 1.321,9 1.463,8 1.613,2

42 824,00 1.457,4 1.613,8 1.778,5

44 905,00 1.599,4 1.771,1 1.951,8

46 989,00 1.748,1 1.935,8 2.133,3

48 1.077,00 1.903,5 2.107,8 2.322,9

Technical data

Super 8S Super 8S

> 26

Super 8S

Python Super 8S Python Super 8S



CHARACTERISTICS:

Python Super 8C is a strand compacted rope with a plastic coated core. It features excellent bending behaviour while providing highest breaking strength and is recommended for tough environmental and working conditions. SUPER 8C is designed as a Warrington-Seale construction. 10 strong outer wires in the outer strands provide high abrasion resistance, resulting in a higher service life.

SUPER 8C is equipped with an in-house developed graphite lubrication.

SUPER 8C is neither rotation-resistant nor non-rotating.


PYTHON SUPER 8C is recommended as trolley-, luffing-, pendant- and multi-guided hoist rope on portal- and shipcranes, RTGs and floating-, container- and harbourcranes.Especially for multi-layered drums and high breaking strength requirements, SUPER 8C is an excellent choice over uncompacted ropes.

Technical criteria





Fill factor 0,660



Nominal diameter

[mm]



1960 N/mm² EIPS

1770 N/mm² IPS

complete outer layer in 1770

only outer wire of outer layer

in 1770

complete wire rope in 1960

2160 N/mm² EEIPS

12 63,45 113,2 115,5 119,4 128,8 132,0

13 73,95 131,4 134,1 138,5 149,5 153,1

14 86,73 154,1 157,2 162,5 175,4 179,6

15 97,95 175,7 179,4 185,6 199,9 204,8

16 114,12 203,3 207,4 214,5 231,3 237,0

17 126,79 225,7 230,4 238,6 256,8 263,0

18 142,35 254,6 259,9 268,7 289,7 296,8

19 157,49 282,4 288,4 298,5 321,3 329,2

20 175,72 313,9 320,4 331,6 357,1 365,9

22 213,21 381,7 389,9 403,1 434,2 444,8

24 251,11 450,4 459,6 475,3 512,4 524,9

26 293,65 527,3 538,0 556,7 599,9 614,5

28 343,71 617,9 630,0 651,6 702,9 720,1

30 391,50 701,7 716,2 741,1 798,4 817,9

32 451,04 809,9 826,4 854,8 921,4 943,9

34 508,72 907,7 926,5 958,1 1.032,7 1.058,0

36 568,66 1.019,7 1.040,7 1.076,3 1.160,1 1.188,5

38 633,97 1.131,6 1.154,8 1.193,8 1.287,4 1.318,9

40 700,40 1.256,5 1.282,7 1.326,5 1.429,5 1.464,5

42 769,10 1.380,9 1.409,2 1.458,0 1.571,0 1.609,4

44 847,18 1.513,9 1.545,1 1.598,0 1.722,3 1.764,4

46 929,27 1.659,2 1.693,5 1.751,6 1.887,7 1.933,8

48 1.010,12 1.801,4 1.838,9 1.901,9 2.049,4 2.099,5

Technical data

> 20

Super 8C Super 8C

Super 8C

Python Super 8C Python Super 8C



CHARACTERISTICS:

Python Super 8PC is a strand compacted rope with a double plastic coating. One coating protects the IWRC’s core from its outer strands, while the second coating avoids direct contact between IWRC and outer strands.

As a consequence, there is no direct contact between the wires of the different layers. In comparison to the other SUPER 8 ropes, the added coating provides an increased protection against invisible wire breaks. Lubrication is properly kept inside the core strand respectively the IWRC. Recommended application fields are toughest working conditions in fatigue-relevant applications, e.g.harbour business. By reducing 12 to 10 outer wires, the thicker wires provide higher abrasion resistance. In combination with strand compaction, an in-house developed graphite-enriched lubricant and two plastic coatings, this rope has a very high service life.

SUPER 8PC has up to 30% higher breaking loads than a standard 6x36 construction. In particular, SUPER 8PC is highly recommended for applications with multi-layer spooling. It is neither rotation-resistant nor non-rotating.


SUPER 8PC is recommended as trolley-, luffing-, pendant- and multi-guided hoist rope on portal- and shipcranes, RTGs and floating-, container- and harbourcranes.Especially for multi-layered drums and high breaking strength requirements, SUPER 8PC is an excellent choice over uncompacted ropes.


Technical criteria





Fill factor 0,660


Nominal diameter

[mm]



1960 N/mm² EIPS

1770 N/mm² IPS

complete outer layer in 1770

only outer wire of outer layer in

1770

complete wire rope

in 1960

2160 N/mm² EEIPS

28 343,71 617,9 630,0 651,6 702,9 720,1

30 391,50 701,7 716,2 741,1 798,4 817,9

32 451,04 809,9 826,4 854,8 921,4 943,9

34 508,72 907,7 926,5 958,1 1.032,7 1.058,0

36 568,66 1.019,7 1.040,7 1.076,3 1.160,1 1.188,5

38 633,97 1.131,6 1.154,8 1.193,8 1.287,4 1.318,9

40 700,40 1.256,5 1.282,7 1.326,5 1.429,5 1.464,5

Technical data

> 20

Super 8PC Super 8PC

Super 8PC

Python Super 8PC Python Super 8PC



> 20

recommended D/d-ratio: swivel:




1770 N/mm² IPS 1960 N/mm² EIPS

20 172,00 281,1 311,3

22 209,00 340,2 376,7

24 248,00 404,9 448,3

26 291,00 475,1 526,1

28 338,00 551,1 609,8

30 388,00 632,6 700,5

32 441,00 719,7 797,0

34 498,00 812,5 899,7

36 558,00 910,9 1.008,7

38 622,00 1.014,9 1.123,9

40 689,00 1.124,6 1.245,3

42 760,00 1.239,9 1.372,9

44 834,00 1.360,8 1.506,8

46 912,00 1.487,3 1.646,9

48 993,00 1.619,4 1.793,2

Technical data

CHARACTERISTICS:

Python Flameshield is an 8-strand High Performance Wire Rope with high temperature resistant outer wires. These wires are different from normal wires with respect to both material and production process. The lubricant applied to Flameshield is not prone to dripping and coking. In combination with a flexible core it provides a long service life under high temperature working conditions. PYTHON FLAMESHIELD 8 is neither rotations-resistant nor non-rotating


PYTHON FLAMESHIELD 8 is a hoist rope suited for cranes operating in high temperature environments. In steel mills, parts of the rope are exposed to the furnace’s or converter’s flames during batching.

Here, temperatures of 800° C and more can easily be achieved. Despite the rope cooling down to room temperature after this process heat remains within the drum’s core.Examinations of wires from this area show a gradual deterioration of mechanical wire properties. In standard wire ropes, frequent temperature fluctuations cause embrittlement of the wires, resulting in a reduced service life.

For this reason, FLAMESHIELD 8 uses high temperature resistant outer wires.

Technical criteria



Load bearing outer wires 152 + IWRC


Fill factor 0,632


Flameshield 8 Flameshield 8

Flameshield 8

Flameshield 8 Flameshield 8



CHARACTERISTICS:

Python Power 9R is constructed from a total of up to 358 single wires compared to 265 single wires in traditional 6x36 wire rope. This results in a super strong yet super flexible rope.

Although POWER 9R is our most successful high strength rope construction, there are precautions we must address before you select this rope. One is that the direction of lay which must correspond to drum grooving; the other is that large fleet angles may cause high strands or core protrusion because the rope will roll rather than glide into the sheave groove. Any introduction of torque into (any) wire rope will cause structural damages.


Super high strength yet super flexible overhead crane wire rope. Used as original equipment rope and for crane capacity upgrades. Also used as high strength engineered assembly cable for tension applications.

Technical criteria

Number of strands 28

Number of wires 268 / 358



Fill factor 0,718 / 0,730

Available in Regular lay





1960 N/mm² EIPS 2160 N/mm² EEIPS

10 49,00 89,0 98,1

11 59,00 107,7 118,7

12 71,00 128,1 141,2

13 83,00 150,4 165,7

14 96,00 174,4 192,2

15 110,00 200,2 220,6

16 126,00 227,8 251,0

17 142,00 257,2 283,4

18 159,00 288,3 317,7

19 177,00 321,2 354,0

20 196,00 355,9 392,3

22 234,00 438,3 483,0

24 279,00 521,6 574,8

26 327,00 612,1 674,6

28 379,00 709,9 782,4

30 436,00 815,0 898,1

32 496,00 927,3 1.022,0

34 560,00 1.047,0 1.153,5

36 627,00 1.173,5 1.293,5

38 699,00 1.307,5 1.441,0

40 774,00 1.449,0 1.596,5

42 854,00 1.597,5 1.760,5

44 937,00 1.753,0 1.932,0

46 1.024,00 1.916,0 2.111,5

48 1.115,00 2.086,5 2.299,0

Technical data

> 26

Power 9R Power 9R

Power 9R

Power 9R

Python Power 9R Python Power 9R



CHARACTERISTICS:

Python Power 9S is swage compacted to enhance the abrasion characteristic and to reduce sheave- and drum wear. Type Power 9S in combination with EEIPS (2160 N/mm) wire tensile grades increases rope strength to up to 50% over regular strength 6-strand types. POWER 9S is constructed from a total of up to 358 single wires compared to 265 single wires in traditional 6x36 wire rope. This results in a super strong yet super flexible rope. Although POWER 9S is our most successful high strength rope construction, there are precautions we must address before you select this rope. One is that the direction of lay which must correspond to drum grooving; the other is that large fleet angles may cause high strands or core protrusion because the rope will roll rather than glide into the sheave groove. Any introduction of torque into (any) wire rope will cause structural damages.


Super high strength yet super flexible overhead crane wire rope. Used as original equipment rope and for crane capacity upgrades. Also used as high strength engineered assembly cable for tension applications.

Technical criteria





Fill factor 0,780

Available in Regular layrecommended D/d-ratio:swivel:





12 77,00 139,1 153,3

13 90,00 163,3 180,0

14 104,00 189,4 208,7

15 120,00 217,4 239,6

16 136,00 247,4 272,6

17 154,00 279,3 307,8

18 173,00 313,1 345,0

19 192,00 348,8 384,4

20 213,00 386,5 426,0

22 251,00 467,7 515,4

24 298,00 556,6 613,4

26 350,00 653,2 719,9

28 406,00 757,6 834,9

30 466,00 869,7 958,4

32 530,00 989,5 1.090,4

34 599,00 1.117,0 1.231,0

36 671,00 1.252,3 1.380,1

38 748,00 1.395,3 1.537,7

40 829,00 1.546,0 1.703,8

42 914,00 1.704,5 1.878,4

44 1.003,00 1.870,7 2.061,6

46 1.096,00 2.044,6 2.253,3

48 1.193,00 2.226,3 2.453,5

Technical data

> 26

Power 9S Power 9S

Power 9S

Power 9S

Python Power 9S Python Power 9S



CHARACTERISTICS:

Python Ultra R is a double parallel closed all-steel rope for applications which demand highest breaking loads. Depending on type, ULTRA R achieves up to 45% higher breaking loads in comparison to a standard 6x36 construction.Ten flexible outer strands provide better pressure distribution and help minimizing wear of sheave and drum.Up to 20 mm the rope is manufactured as a 10x19 Seale construction; from 22 mm upwards as a 10x25 Filler construction. ULTRA R is neither rotation-resitant nor non-rotating. ULTRA R must not be used where high fleet angles apply.


ULTRA R is recommended as erection rope, trolley rope as well as hoisting rope for overhead cranes.

Technical criteria












12 70,00 128,5 141,6

13 82,00 150,8 166,2

14 95,00 174,9 192,7

15 109,00 200,8 221,2

16 124,00 228,4 251,7

17 140,00 257,9 284,2

18 156,00 289,1 318,6

19 174,00 322,1 355,0

20 193,00 356,9 393,3

22 232,00 433,5 477,8

24 276,00 515,9 568,7

26 324,00 605,5 667,4

28 376,00 702,2 774,0

30 431,00 806,1 888,5

32 490,00 917,2 1.010,9

34 554,00 1.035,5 1.141,2

36 621,00 1.160,9 1.279,5

38 692,00 1.293,4 1.425,6

40 766,00 1.433,2 1.579,6

42 845,00 1.580,1 1.741,5

44 927,00 1.734,1 1.911,3

46 1.014,00 1.895,3 2.089,0

48 1.104,00 2.063,7 2.274,6

Technical data

> 26

Ultra R Ultra R

Ultra R

Ultra R

Python Ultra R Python Ultra R



CHARACTERISTICS:

Python Ultra S is the swage-compacted version of ULTRA R.ULTRA S is a double parallel closed all-steel rope for applications which demand highest breaking loads. Depending on type, ULTRA S achieves up to 55% higher breaking loads in comparison to a standard 6x36 construction. Ten flexible outer strands provide better pressure distribution and help minimizing wear of sheave and drum. The swaged outer strands of the S type further add to this effect and have the rope lack almost all of its constructional stretch. Up to 20 mm the rope is manufactured as a 10x19 Seale construction; from 22 mm upwards as a 10x25 Filler construction.

ULTRA S is neither rotation-resitant nor non-rotating. ULTRA S must not be used where high fleet angles apply.


ULTRA S is recommended as erection rope, trolley rope as well as hoisting rope for overhead cranes.

Technical criteria





Fill factor 0,800







12 78,00 142,8 157,4

13 91,00 167,7 184,7

14 106,00 194,4 214,2

15 122,00 223,1 245,9

16 138,00 253,9 279,8

17 156,00 286,6 315,9

18 175,00 321,3 354,1

19 195,00 358,0 394,6

20 216,00 396,7 437,2

22 257,00 480,0 529,0

24 306,00 571,3 629,5

26 360,00 670,4 738,8

28 417,00 777,5 856,9

30 479,00 892,6 983,7

32 545,00 1.015,6 1.119,2

34 615,00 1.146,5 1.263,5

36 689,00 1.285,3 1.416,5

38 768,00 1.432,1 1.578,2

40 851,00 1.586,8 1.748,7

42 938,00 1.749,5 1.928,0

44 1.030,00 1.920,0 2.116,0

46 1.126,00 2.098,6 2.312,7

48 1.226,00 2.285,0 2.518,2

Technical data

> 26

Ultra S Ultra S

Ultra S

Ultra S

Python Ultra S Python Ultra S



CHARACTERISTICS:

Python Multi is a ten strand High Performance Wire Rope with a plastic coated core. The reverse laid core provides spin resistance and helps to reduce unwanted block twisting on overhead cranes. MULTI is less sensitive to wrong drum grooving, making it the ideal choice for cranes where both rope ends are attached to the drum. Compared to six-strand ropes, MULTI has increased service life in many cases up to five times and more. Ten outer strands distribute the load pressures more equally thus reducing wear of the rope and your equipment. Swage calibration further adds to this effect as it applies an almost circular cross section to the rope, providing smooth running properties. It also reduces rapid wire destruction in crossover areas on multi-layered drums. MULTI has only minor constructional stretch.


10-strand high performance wire rope for overhead cranes as well as some truck- and container cranes. Special spin-resistant feature prevents much of the unwanted block twisting on overhead cranes.

Technical criteria


Number of wires 265



Fill factor 0,606






13 75,00 127,9 140,9

14 87,00 148,3 163,4

15 100,00 170,2 187,6

16 114,00 193,7 213,4

17 129,00 218,6 241,0

18 144,00 245,1 270,1

19 161,00 273,1 301,0

20 178,00 302,6 333,5

22 215,00 366,2 403,5

24 256,00 435,8 480,2

26 301,00 511,4 563,9

28 349,00 593,1 653,7

30 401,00 680,9 750,4

32 456,00 774,7 853,8

34 514,00 874,6 963,8

36 577,00 980,5 1.080,5

38 643,00 1.092,5 1.204,0

40 712,00 1.210,5 1.334,0

42 785,00 1.334,5 1.470,5

44 862,00 1.464,5 1.614,0

Technical data


> 20

Multi Multi

Multi

Python Multi Python Multi



CHARACTERISTICS:

Python Compac 35 is a non-rotating strand compacted rope of the 35x7 class. For highest breaking load requirements, both inner and outer strands are strand compacted. 16 outer and 19 inner strands provide optimal balance of torque factors and grant excellent non-rotating properties. Depending on diameter (40-120 mm) and breaking load requirements, COMPAC 35 is manufactured as 35x17/19 Seale/Warrington Seale, 35x26 Warrington or 35x31 Warrington Seale. Both strand compaction and availability in Lang’s lay make COMPAC 35 the preferred choice for multi-layer spooling. On request, COMPAC 35 is available as uncompacted version named CLASSIC 35.


COMPAC 35 is recommended for auxiliary and main hoist lines for all kinds of cranes with requirement for highest breaking loads and superior non-rotating properties.

Technical criteria


Number of wires> 245

depends on construction

Load bearing outer wires> 112

depends on construction



Available in Regular-/ Lang layrecommended D/d-ratio:swivel:

Nominal diameter

[mm]



1960 N/mm² EIPS 2160N/mm² EEIPS

CLASSIC 35 COMPAC 35 CLASSIC 35 COMPAC 35 CLASSIC 35 COMPAC 35

8 26,60 30,70 48,6 55,8 53,5 61,5

9 33,70 38,90 61,5 70,6 67,7 77 ,8

10 41,60 48,00 75,9 87,2 83,6 96,1

11 50,30 58,10 91,8 105,5 101,2 116,3

12 59,90 69,10 109,2 125,6 120,4 138,4

13 70,30 81,10 128,2 147,4 141,3 162,4

14 81,60 94,10 148,7 170,9 163,9 188,3

15 93,60 108,00 170,7 196,2 188,1 216,2

16 106,50 122,80 194,2 223,2 214,0 246,0

17 120,20 138,70 219,2 252,0 241,6 277,7

18 134,80 155,50 245,8 282,5 270,9 311,3

19 150,20 173,20 273,9 314,8 301,8 346,9

20 182,00 201,00 330,0 357,0 363,0 394,0

22 218,00 241,00 395,0 430,0 436,0 474,0

24 258,00 284,00 468,0 505,0 516,0 551,0

26 309,00 335,00 560,0 598,0 617,0 652,0

28 356,00 391,00 647,0 696,0 712,0 760,0

30 407,00 446,00 739,0 794,0 814,0 866,0

32 462,00 503,00 838,0 896,0 923,0 977,0

34 518,00 574,00 940,0 1.023,0 1.036,0 1.105,0

36 589,00 642,00 1.069,0 1.141,0 1.178,0 1.235,0

38 661,00 718,00 1.199,0 1.279,0 1.321,0 1.381,0

40 727,00 793,00 1.319,0 1.412,0 1.454,0 1.525,0

42 800,00 870,00 1.452,0 1.549,0 1.600,0 1.673,0

Technical data

> 20

Classic 35Compac 35

Classic 35Compac 35

Classic 35

Compac 35

Python Classic 35Python Compac 35

Python Classic 35Python Compac 35



Technical criteria


Number of wires 241



Fill factor 0,714


CHARACTERISTICS:

Python Lift is a multi-layer non-rotating rope with 15 outer strands for highest breaking load requirements: in comparison to a 19x7 class rope, the gain in strength is an astonishing 60%. With only 5 outer wires per strand (plus one aluminium wire), it provides excellent abrasion resistance.Swage compaction applies an almost circular cross section to the rope and contributes to high running smoothness and proper pressure distribution on sheave and drum. It also reduces rapid wire destruction in crossover areas on multi-layered drums. LIFT has very little to no constructional stretch.


PYTHON LIFT is recommended as main and auxiliary hoist line for tower cranes, construction cranes and mobile (lattice boom) cranes.We do not recommended this rope to be used on smooth drums. It works best on LEBUS drums with appropriately sized pitch.






10 47,00 96,2 106,1

11 57,00 116,4 128,3

12 68,00 138,6 152,7

13 79,00 162,6 179,2

14 92,00 188,6 207,9

15 106,00 216,5 238,6

16 120,00 246,4 271,5

17 136,00 278,1 306,5

18 152,00 311,8 343,6

19 169,00 347,4 382,9

20 188,00 384,9 424,2

22 227,00 465,8 513,3

24 270,00 554,3 610,9

26 317,00 650,6 716,9

28 368,00 754,5 831,5

30 422,00 866,1 954,5

32 480,00 985,5 1.086,0

Technical data

> 20

Lift Lift

Lift

Python Lift Python Lift



Technical criteria


Number of wires 291





CHARACTERISTICS:

Python Hoist is a compacted rope with superior non-rotating properties. 17 outer strands provide high resistance against drum and sheave pressure. The plastic coated core effectively prevents premature failure of the rope core and thus improves the rope’s service life. PYTHON HOIST can be used in applications with high dynamic load conditions. HOIST is designed as HOIST S (swaged version) and HOIST C (strand compacted version). Applicability is subject to customer’s installation and preferences. Please call for advice.


HOIST C/S is recommended as a medium to high strength hoist rope for ship-, deck- and harbour cranes, tower cranes, mobil cranes and offshore cranes, in particular for usage on multilayer drums.


Nominal diameter

[mm]




HOIST S HOIST C HOIST S HOIST C HOIST S HOIST C

10 44,00 87,9 96,8

11 54,00 106,3 117,1

12 64,00 68,40 126,5 136,3 139,4 142,9

13 75,00 78,00 148,4 153,4 163,5 163,1

14 87,00 89,30 172,2 179,0 189,7 187,7

15 100,00 103,90 197,6 208,3 217,8 218,4

16 114,00 118,70 224,8 236,7 247,8 248,2

17 128,00 133,10 253,8 261,9 280,0 278,5

18 144,00 150,00 284,6 300,3 313,6 314,9

19 161,00 169,50 317,1 338,3 349,4 354,7

20 178,00 186,90 351,3 373,7 387,2 391,9

22 216,00 224,70 425,2 450,3 468,5 472,2

24 257,00 272,30 506,0 543,4 557,6 559,1

26 301,00 317,00 593,7 633,1 654,4 663,9

28 349,00 364,00 688,6 725,8 758,9 761,1

30 401,00 415,20 790,6 829,7 871,1 870,0

32 456,00 469,20 899,5 936,8 991,2 982,3

34 515,00 530,40 1.015,4 1.060,6 1.119,0 1.112,1

36 576,00 601,40 1.138,4 1.200,2 1.254,5 1.258,4

38 643,00 659,80 1.268,4 1.318,0 1.397,8 1.382,0

40 711,00 731,70 1.405,3 1.460,7 1.548,8 1.531,6

42 785,00 817,70 1.549,4 1.634,8 1.707,5 1.714,1

44 861,00 898,90 1.700,5 1.794,6 1.874,0 1.881,7

46 942,00 988,90 1.858,6 1.974,1 2.048,3 2.069,9

48 1.025,00 1.044,80 2.023,7 2.091,1 2.230,2 2.192,6

50 1.112,00 2.195,9 2.420,0

Technical data

> 20

Hoist SHoist C

Hoist SHoist C

Hoist S

Hoist C

Python Hoist S / C Python Hoist S / C

Vermeulen Python High Performance Wireropes Brochure UK

Documents

Transcript of Vermeulen Python High Performance Wireropes Brochure UK