Varun Resume

3

Click here to load reader

Transcript of Varun Resume

Page 1: Varun Resume

P.VARUN SAI REDDY

Email: [email protected]: +919663773732

EDUCATIONAL QUALIFICATION

Course Board/ School Year Aggregate

University /College (%)

B.E VTU,Belgaum CMR Institute 2015 65.35(Mechanical Of Technology,Engineering) Bangalore

XII STATE BOARD Sri Chaitanya 2009 75.6(MPC) Childrens

Academy juniorcollege,Kadapa

X STATE BOARD Sri Chaitanya 2007 78.5ChildrensAcademy,Kadapa

WORK EXPERIENCE

Company : MCD BUILT ENVIRONMENT RESEARCH LAB PVT LTD

Position : HVAC DESIGN ENGINER

Experience : 1+ Years

SKILLS IN HVAC

∑ Designed Building Mechanical systems for projects through all different phases from schematic design to construction documents of various projects like Shopping Malls, Education Institute, Hospitals, Pharmaceutical, Commercial Buildings, Residential buildings etc.

∑ I have designed HVAC systems based, centralized cooling and heating, VAV air distribution systems, constant air volume, VRF / VRV system DX-Split system while maintaining the indoor air quality.

∑ Pre-cooling system design like HRW, IDEC, DEC, MS-IDEC. ∑ Carried out Building Services HVAC design as per ASHRAE standards, SMACNA .∑ Performed load calculations, equipment selections, AutoCAD drafting, GFC & Tender

drawings and Building Services Coordination with other trades.

Page 2: Varun Resume

∑ Designing of ventilation systems for Kitchens, basements, staircase pressurization systems etc.

∑ Making the cooling load calculations for HVAC Systems, Static pressure calculations, Pump head calculations for Pumping systems (Distribution & circulations) based on Tool and Manual calculations, as required by the project submissions documents.

∑ Carrying out correspondence / negotiations with vendors/suppliers for procurement of HVAC material & equipment.

∑ Calculate air changes and ventilation requirements based on type of system needed by the client and adjusted design for suitability and highest efficiency performance.

∑ Preparation of the “Tender Document” including “Specifications”, “Schedule of Equipment”, “Bill of Quantities” & Engineer’s cost Estimate.

∑ Site supervision of Mechanical Services usually on projects visits basis as a part top supervision part to ensure Quality assurance works and executed works is in accordance with design intent and provide solutions or any ongoing coordination issues among various trades.

PROJECTS HANDLED

Project 1 – INFOSYS LIMITED.

Location - INDORE, INDIA

Area - 4, 58,000 sqft

Description - This is an office building. After series of Hourly load analysis on the type ofsystem , finally Radiant cooling Technology is used to Air- conditioning. Was able to achieve 800sqft/TR on the overall Built up area. Pre-cooling cooling was used to reduce the overall fresh air load by 50%. Was able to achieve 50% savings compared to a conventional building. It is a LEED platinum rated Building.

Project 2 - Howard Johnson Hotel

Location - Udaipur

Area - 1,58,000 sqft

Description - This is a 5 star rated Hotel building. Water cooled system is proposed forthe building. Followed a unique approach Day and Night load analysis to determine the peak load of design to reduce the High side installed capacity of the building. Was observed that a reduction of 30% of CAPEX compared to a conventional building. Was able to achieve 350sqft/TR . Heat pump Waste cooling is used for fresh air for kitchen. Indirect evaporative cooling was used to reduce the fresh air load.

Page 3: Varun Resume

Project 3 - NMTC

Location - Bangalore

Description - CMTI is establishing a Nano Manufacturing Technology Centre (NMTC)under the Planned Project as a part of Nano Technology Initiative at its existing location in Bangalore. NMTC is being setup with an objective of propagating Nano Manufacturing Technology in Indian industries. Its clean room project. A temperature variation of +-0.1 Deg C has to be maintained. Class 100 project. Water cooled system is proposed for cooling. Heat recovery units are used to reduce the fresh air load.

SOFTWARE CAPABILITIES

∑ Auto cad ∑ Duct sizer ∑ Pipe sizer

PERSONAL DETAILS

Name : P .Varun Sai ReddyDate of Birth : 16-10-1992Gender : MaleFather's Name : P. Chandra Sekhar ReddyLanguages Known : Telugu, EnglishPermanent Address : 1-771, Dwaraka Nagar, Kadapa -516004

Andhra Pradesh.

DECLARATION

I hereby declare that the above written particulars are true to the best of my knowledge.

Place: BANGALORE (P.Varun Sai Reddy)