Valve Pressure Rating

16
www.Fisher.com Pressure/Temperature Ratings for Fisherr Valves (ASME B16.34-2013) - U.S. Traditional Units Material Reference Guide Table U.S. Traditional Units Fisher valves conforming to ASME B16.34-2013 standard have specific pressure-temperature limits depending on construction materials. Use the material references in table 1 when determining pressure-temperature ratings of valves used in accordance with the ASME standard. Table 1. Valve Body Materials CATEGORY ASME Specification Grade Material Group Nominal Designation Carbon Steel SA-216 WCC (1) 1.2 S-Mn-Si SA-352 LCC (2) 1.2 S-Mn-Si SA-350 LF2 1.1 C-Mn-Si Alloy Steels SA-217 WC6 1.9 1-1/4Cr-1/2 Mo WC9 1.10 2-1/4Cr-1 Mo C12A 1.15 9Cr-1 Mo-V Stainless Steel SA-351 CF8M 2.2 16Cr-12 Ni-2Mo CF8 2.1 18Cr-8 Ni CF8C 2.11 18Cr-10 Ni-Cb CF3M 2.2 16Cr-12 Ni-2Mo CG8M 2.2 19Cr-10 Ni-3Mo CK3MCuN 2.8 20Cr-18 Ni-6Mo SA-995 CD3MN (3) (Grade 4A) 2.8 22Cr-5 Ni-3Mo-N CD3MWCuN (Grade 6A) 2.8 25Cr-7 Ni-3.5Mo-Cb 1. WCC is a standard substitute for WCB material. 2. LCC is a standard substitute for LCB material. 3. Listed as A351-CD3MN in B16.34-2013. P/T Ratings for Valves (U.S. Units) D101463X012 Product Bulletin 59.1:021 September 2013

description

Asme b16.34

Transcript of Valve Pressure Rating

Page 1: Valve Pressure Rating

www.Fisher.com

Pressure/Temperature Ratingsfor Fisherr Valves(ASME B16.34-2013) - U.S. Traditional Units

Material Reference Guide Table

U.S. Traditional UnitsFisher valves conforming to ASME B16.34-2013 standard have specific pressure-temperature limits depending onconstructionmaterials. Use thematerial references in table 1 when determining pressure-temperature ratings ofvalves used in accordance with the ASME standard.

Table 1. Valve BodyMaterials

CATEGORYASME

Specification Grade Material Group Nominal Designation

Carbon Steel

SA-216 WCC(1) 1.2 S-Mn-Si

SA-352 LCC(2) 1.2 S-Mn-Si

SA-350 LF2 1.1 C-Mn-Si

Alloy Steels SA-217

WC6 1.9 1-1/4Cr-1/2Mo

WC9 1.10 2-1/4Cr-1Mo

C12A 1.15 9Cr-1Mo-V

Stainless Steel

SA-351

CF8M 2.2 16Cr-12 Ni-2Mo

CF8 2.1 18Cr-8 Ni

CF8C 2.11 18Cr-10 Ni-Cb

CF3M 2.2 16Cr-12 Ni-2Mo

CG8M 2.2 19Cr-10 Ni-3Mo

CK3MCuN 2.8 20Cr-18 Ni-6Mo

SA-995

CD3MN(3)

(Grade 4A)2.8 22Cr-5 Ni-3Mo-N

CD3MWCuN(Grade 6A)

2.8 25Cr-7 Ni-3.5Mo-Cb

1.WCC is a standard substitute for WCBmaterial.2. LCC is a standard substitute for LCBmaterial.3. Listed as A351-CD3MN in B16.34-2013.

P/T Ratings for Valves (U.S. Units)D101463X012

Product Bulletin59.1:021

September 2013

Page 2: Valve Pressure Rating

P/T Ratings for Valves (U.S. Units)D101463X012

Product Bulletin59.1:021September 2013

2

Standard Pressure-Temperature Ratings for CL150 andCL300 ValvesFisher valvematerials that conform to ASME B16.34-2013 Standard Class pressure-temperature ratings are listed intables 2 and 3. These ratings apply to all Fisher cast, forged, and fabricated steel valves.

Table 2. For ASME Standard CL150 Valves(1)

SERVICETEMP (_F)

WORKING PRESSURE (PSIG)

LCC LF2 WCCWC6(2)

WC9(2)

C12A(2)

CF8(2,3) or304(2,3)

CF8M(2,3) or316(2,3)

CF3M 316L CG8M317(2,3)

CF8C(2,3) 347

CK3MCuNCD3MN

CD3MWCuN

-20 to 100200300400500

290260230200170

285260230200170

290260230200170

290260230200170

290260230200170

290260230200170

275230205190170

275235215195170

275235215195170

230195175160150

275235215195170

275235215195170

275255230200170

275255230200170

290260230200170

600650700750800

140125- - -- - -- - -

1401251109580

1401251109580

1401251109580

1401251109580

1401251109580

1401251109580

1401251109580

1401251109580

14012511011080

1401251109580

1401251109580

1401251109580

1401251109580

14012511095- - -

85090095010001050

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

6550352020

6550352020

6550352020

6550352020

6550352020

65- - -- - -- - -- - -

65- - -- - -- - -- - -

65503520- - -

6550352020

6550352020

65503520- - -

- - -- - -- - -- - -- - -

11001150120012501300

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

20- - -- - -- - -- - -

20- - -- - -- - -- - -

202020- - -- - -

2020202020

2020202020

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

2020202020

2020202020

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

1350140014501500

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

20202015

20202015

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

20202015

20151010

- - -- - -- - -- - -

- - -- - -- - -- - -

1. Table information is extracted from the Valve–Flanged, Threaded, andWelding End, ASME Standard B16.34-2013. These tables must be used in accordance with the ASME standard. Theuser is advised that a valve used under the jurisdiction of the ASME Boiler and Pressure Vessel Code, ASME Code for Pressure Piping, or governmental regulations is subject to any limitation ofthat code or regulation. This includes anymaximum temperature limitation for amaterial or rule governing the use of amaterial at a low temperature.” Information copied with permission ofthe publisher; The American Society of Mechanical Engineers, 345 East 47th Street, New York, New York, 10017.2. Flanged end ratings terminate at 1000_F.3. At temperatures over 1000_F, usematerial only when carbon content is 0.04% or higher.

Page 3: Valve Pressure Rating

P/T Ratings for Valves (U.S. Units)D101463X012

Product Bulletin59.1:021

September 2013

3

Table 3. For ASME Standard CL300 Valves(1)

SERVICETEMP (_F)

WORKING PRESSURE (PSIG)

LCC LF2 WCC WC6 WC9C12A(2)

CF8(2,3)

or304(2,3)

CF8M(2,3)

or 316(2,3)CF3M 316L CG8M

317(2,3)

CF8C(2,3) 347

CK3MCuNCD3MN

CD3MWCuN

-20 to 100200300400500

750750730705665

740680655635605

750750730705665

750750720695665

750750730705665

750750730705665

720600540495465

720620560515480

720620560515480

600510455420395

720620560515480

720620560515480

720660615575540

720660615575540

750745665615580

600650700750800

605590- - -- - -- - -

570550530505410

605590555505410

605590570530510

605590570530510

605590570530510

440430420415405

450440435425420

450440435425420

370365360355345

450440435425420

450440435425420

515505495490485

515505495490485

555545540530- - -

85090095010001050

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

485450320215145

485450385265175

485450385365360

395390380355325

420415385365360

420- - -- - -- - -- - -

340- - -- - -- - -- - -

420415385365- - -

420415385365360

485450385365360

485450385365- - -

- - -- - -- - -- - -- - -

11001150120012501300

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

95- - -- - -- - -- - -

110- - -- - -- - -- - -

300225145- - -- - -

255205165135115

305235185145115

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

305235185145115

31021015011575

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

1350140014501500

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

95756040

95756040

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

95756040

50403025

- - -- - -- - -- - -

- - -- - -- - -- - -

1. Table information is extracted from the Valve–Flanged, Threaded, andWelding End, ASME Standard B16.34-2013. These tables must be used in accordance with the ASME standard. Theuser is advised that a valve used under the jurisdiction of the ASME Boiler and Pressure Vessel Code, ASME Code for Pressure Piping, or governmental regulations is subject to any limitation ofthat code or regulation. This includes anymaximum temperature limitation for amaterial or rule governing the use of amaterial at a low temperature.” Information copied with permission ofthe publisher; The American Society of Mechanical Engineers, 345 East 47th Street, New York, New York, 10017.2. Flanged end ratings terminate at 1000_F.3. At temperatures over 1000_F, usematerial only when carbon content is 0.04% or higher.

Page 4: Valve Pressure Rating

P/T Ratings for Valves (U.S. Units)D101463X012

Product Bulletin59.1:021September 2013

4

Special Pressure-Temperature Ratings for CL150 andCL300 Threaded orWelding End ValvesFisher valvematerials that conform to ASME B16.34-2013 Special Class pressure-temperature ratings are listed intables 4 and 5. These ratings apply to all Fisher cast, forged, and fabricated steel valves. Nondestructive examinationapplies (Fisher Process Level 6).

Table 4. For ASME Special CL150 Valves(1)

SERVICETEMP (_F)

WORKING PRESSURE (PSIG)

LCC LF2 WCC WC6 WC9C12A(2)

CF8(2)

or 304(2)CF8M(2)

or 316(2)CF3M 316L CG8M

317(2)

CF8C(2) 347

CK3MCuNCD3MN

CD3MWCuN

-20 to 100200300400500

290290290290290

290290285280280

290290290290290

290290290290290

290290285280280

290290290290290

290255230215200

290265240220205

290265240220205

255220195180170

290265240220205

290265240220205

290275255240230

290285265245230

290290285265250

600650700750800

290290- - -- - -- - -

280275265245195

290290280280255

290290280280275

275275270270270

290290280280275

190185180175175

195190185185180

195190185185180

160155155150150

195190185185180

195190185185180

220215215210210

220215215210210

240235230230- - -

85090095010001050

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

26022515510570

26023018013085

260230180160160

170165165160155

180180175160160

180- - -- - -- - -- - -

145- - -- - -- - -- - -

180180175160- - -

180180175160160

205205180160160

205205180160- - -

- - -- - -- - -- - -- - -

11001150120012501300

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

45- - -- - -- - -- - -

55- - -- - -- - -- - -

14510570- - -- - -

125100806555

145115907055

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

145115907055

150100705535

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

1350140014501500

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

45353020

45353020

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

45353020

25201515

- - -- - -- - -- - -

- - -- - -- - -- - -

1. Table information is extracted from the Valve–Flanged, Threaded, andWelding End, ASME Standard B16.34-2013. These tables must be used in accordance with the ASME standard. TheASME standard states in paragraph “2.1.3 Special Class Valves. Threaded or welding end valves that conform to all the requirements of para. 2.1.2 and in addition have successfully passed theexaminations required by Section 8, may be designated Special Class valves.” The standard also stipulates that, “Special Class ratings shall not be used for flanged end valves.” Informationcopied with permission of the publisher; The American Society of Mechanical Engineers, 345 East 47th Street, New York, New York, 10017.2. At temperatures over 1000_F, usematerial only when carbon content is 0.04% or higher.

Page 5: Valve Pressure Rating

P/T Ratings for Valves (U.S. Units)D101463X012

Product Bulletin59.1:021

September 2013

5

Table 5. For ASME Special CL300 Valves(1)

SERVICETEMP (_F)

WORKING PRESSURE (PSIG)

LCC LF2 WCC WC6 WC9C12A(2)

CF8(2)

or 304(2)CF8M(2)

or 316(2)CF3M 316L CG8M

317(2)

CF8C(2) 347

CK3MCuNCD3MN

CD3MWCuN

-20 to 100200300400500

750750750750750

750750740735735

750750750750750

750750750750750

750750740730725

750750750750750

750670600555520

750690625575535

750690625575535

670570510470440

750690625575535

750690625575535

750715660620600

750740690645605

750750745685650

600650700750800

750750- - -- - -- - -

735715690635515

750750715635515

750750735730720

720715705705705

750750735730720

495480470460455

505495485475470

505495485475470

415405400395385

505495485475470

505495485475470

575565555550545

575565555550545

620610605600- - -

85090095010001050

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

680585400270180

680600470335220

680600470420420

440435425415405

465465460420420

465- - -- - -- - -- - -

380- - -- - -- - -- - -

465465460420- - -

465465460420420

540540470420420

540540470420- - -

- - -- - -- - -- - -- - -

11001150120012501300

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

120- - -- - -- - -- - -

135- - -- - -- - -- - -

375280180- - -- - -

320255205165140

380295230185145

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

380295230185145

39026019014095

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

1350140014501500

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

115957550

120957550

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

120957550

65504035

- - -- - -- - -- - -

- - -- - -- - -- - -

1. Table information is extracted from the Valve–Flanged, Threaded, andWelding End, ASME Standard B16.34-2013. These tables must be used in accordance with the ASME standard. TheASME standard states in paragraph “2.1.3 Special Class Valves. Threaded or welding end valves that conform to all the requirements of para. 2.1.2 and in addition have successfully passed theexaminations required by Section 8, may be designated Special Class valves.” The standard also stipulates that, “Special Class ratings shall not be used for flanged end valves.” Informationcopied with permission of the publisher; The American Society of Mechanical Engineers, 345 East 47th Street, New York, New York, 10017.2. At temperatures over 1000_F, usematerial only when carbon content is 0.04% or higher.

Page 6: Valve Pressure Rating

P/T Ratings for Valves (U.S. Units)D101463X012

Product Bulletin59.1:021September 2013

6

Standard Pressure-Temperature Ratings for CL600 andCL900 ValvesFisher valvematerials that conform to ASME B16.34-2013 Standard Class pressure-temperature ratings are listed intables 6 and 7. These ratings apply to all Fisher cast, forged, and fabricated steel valves.

Table 6. For ASME Standard CL600 Valves(1)

SERVICETEMP (_F)

WORKING PRESSURE (PSIG)

LCC LF2 WCC WC6 WC9C12A(2)

CF8(2,3)

or304(2,3)

CF8M(2,3)

or 316(2,3)CF3M 316L CG8M

317(2,3)

CF8C(2,3) 347

CK3MCuNCD3MN

CD3MWCuN

-20 to 100200300400500

15001500145514051330

14801360131012651205

15001500145514051330

15001500144513851330

15001500145514101330

15001500145514101330

144012001075995930

1440124011201025955

1440124011201025955

12001020910840785

1440124011201025955

1440124011201025955

14401325123511501085

14401325123511501085

15001490133512301160

600650700750800

12101175- - -- - -- - -

1135110010601015825

1210117511101015825

12101175113510651015

12101175113510651015

12101175113510651015

885865845825810

900885870855845

900885870855845

745730720705690

900885870855845

900885870855845

10301015995985975

10301015995985975

1115109510851065- - -

85090095010001050

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

975900640430290

975900755535350

975900775725720

790780765710650

835830775725720

835- - -- - -- - -- - -

675- - -- - -- - -- - -

835830775725- - -

835830775725720

970900775725720

970900775725- - -

- - -- - -- - -- - -- - -

11001150120012501300

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

190- - -- - -- - -- - -

220- - -- - -- - -- - -

605445290- - -- - -

515410330265225

610475370295235

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

610475370295235

625420300225150

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

1350140014501500

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

18515011585

19015011585

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

19015011585

105806055

- - -- - -- - -- - -

- - -- - -- - -- - -

1. Table information is extracted from the Valve–Flanged, Threaded, andWelding End, ASME Standard B16.34-2013. These tables must be used in accordance with the ASME standard. Theuser is advised that a valve used under the jurisdiction of the ASME Boiler and Pressure Vessel Code, ASME Code for Pressure Piping, or governmental regulations is subject to any limitation ofthat code or regulation. This includes anymaximum temperature limitation for amaterial or rule governing the use of amaterial at a low temperature.” Information copied with permission ofthe publisher; The American Society of Mechanical Engineers, 345 East 47th Street, New York, New York, 10017.2. Flanged end ratings terminate at 1000_F.3. At temperatures over 1000_F, usematerial only when carbon content is 0.04% or higher.

Page 7: Valve Pressure Rating

P/T Ratings for Valves (U.S. Units)D101463X012

Product Bulletin59.1:021

September 2013

7

Table 7. For ASME Standard CL900 Valves(1)

SERVICETEMP (_F)

WORKING PRESSURE (PSIG)

LCC LF2 WCC WC6 WC9C12A(2)

CF8(2,3)

or304(2,3)

CF8M(2,3)

or 316(2,3)CF3M 316L CG8M

317(2,3)

CF8C(2,3) 347

CK3MCuNCD3MN

CD3MWCuN

-20 to 100200300400500

22502250218521101995

22202035196519001810

22502250218521101995

22502250216520801995

22502250218521151995

22502250218521151995

21601800161514901395

21601860168015401435

21601860168015401435

18001535137012601180

21601860168015401435

21601860168015401435

21601985185017301625

21601985185017301625

22502230200018451740

600650700750800

18151765- - -- - -- - -

17051650159015201235

18151765166515201235

18151765170515951525

18151765170515951525

18151765170515951525

13251295126512401215

13551325130512801265

13551325130512801265

11151095108010601035

13551325130512801265

13551325130512801265

15501520149014751460

15501520149014751460

1670164016251595- - -

85090095010001050

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

14601350955650430

146013501160800525

14601350116010901080

1190116511451065975

12551245116010901080

1255- - -- - -- - -- - -

1015- - -- - -- - -- - -

1255124511601090- - -

12551245116010901080

14551350116010901080

1455135011601090- - -

- - -- - -- - -- - -- - -

11001150120012501300

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

290- - -- - -- - -- - -

330- - -- - -- - -- - -

905670430- - -- - -

770615495400340

915710555440350

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

915710555440350

935625455340225

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

1350140014501500

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

280225175125

290225175125

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

290225175125

1551259580

- - -- - -- - -- - -

- - -- - -- - -- - -

1. Table information is extracted from the Valve–Flanged, Threaded, andWelding End, ASME Standard B16.34-2013. These tables must be used in accordance with the ASME standard. Theuser is advised that a valve used under the jurisdiction of the ASME Boiler and Pressure Vessel Code, ASME Code for Pressure Piping, or governmental regulations is subject to any limitation ofthat code or regulation. This includes anymaximum temperature limitation for amaterial or rule governing the use of amaterial at a low temperature.” Information copied with permission ofthe publisher; The American Society of Mechanical Engineers, 345 East 47th Street, New York, New York, 10017.2. Flanged end ratings terminate at 1000_F.3. At temperatures over 1000_F, usematerial only when carbon content is 0.04% or higher.

Page 8: Valve Pressure Rating

P/T Ratings for Valves (U.S. Units)D101463X012

Product Bulletin59.1:021September 2013

8

Special Pressure-Temperature Ratings for CL600 andCL900 Threaded orWelding End ValvesFisher valvematerials that conform to ASME B16.34-2013 Special Class pressure-temperature ratings are listed intables 8 and 9. These ratings apply to all Fisher cast, forged, and fabricated steel valves. Nondestructive examinationapplies (Fisher Process Level 6).

Table 8. For ASME Special CL600 Valves(1)

SERVICETEMP (_F)

WORKING PRESSURE (PSIG)

LCC LF2 WCC WC6 WC9C12A(2)

CF8(2)

or 304(2)CF8M(2)

or 316(2)CF3M 316L CG8M

317(2)

CF8C(2) 347

CK3MCuNCD3MN

CD3MWCuN

-20 to 100200300400500

15001500150015001500

15001500148014651465

15001500150015001500

15001500150015001500

15001500148014551450

15001500150015001500

15001340120011101040

15001380125011451065

15001380125011451065

134011401020940880

15001380125011451065

15001380125011451065

15001435132012451200

15001480137512851210

15001500149013701295

600650700750800

15001500- - -- - -- - -

14651430138012701030

15001500142512701030

15001500146514601440

14401430141514151415

15001500146514601440

985965945920905

1005985970955945

1005985970955945

830815805790770

1005985970955945

1005985970955945

11501130111011001090

11501130111011001090

1245122012101200- - -

85090095010001050

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

13551175795540360

13551200945670435

13551200945840840

885870850830815

930925915840840

930- - -- - -- - -- - -

755- - -- - -- - -- - -

930925915840- - -

930925915840840

10801080945840840

10801080945840- - -

- - -- - -- - -- - -- - -

11001150120012501300

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

240- - -- - -- - -- - -

275- - -- - -- - -- - -

755555360- - -- - -

645515410335285

765590465370290

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

765590465370290

780525375285190

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

1350140014501500

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

230190145105

240190145105

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

240190145105

1301057570

- - -- - -- - -- - -

- - -- - -- - -- - -

1. Table information is extracted from the Valve–Flanged, Threaded, andWelding End, ASME Standard B16.34-2013. These tables must be used in accordance with the ASME standard. TheASME standard states in paragraph “2.1.3 Special Class Valves. Threaded or welding end valves that conform to all the requirements of para. 2.1.2 and in addition have successfully passed theexaminations required by Section 8, may be designated Special Class valves.” The standard also stipulates that, “Special Class ratings shall not be used for flanged end valves.” Informationcopied with permission of the publisher; The American Society of Mechanical Engineers, 345 East 47th Street, New York, New York, 10017.2. At temperatures over 1000_F, usematerial only when carbon content is 0.04% or higher.

Page 9: Valve Pressure Rating

P/T Ratings for Valves (U.S. Units)D101463X012

Product Bulletin59.1:021

September 2013

9

Table 9. For ASME Special CL900 Valves(1)

SERVICETEMP (_F)

WORKING PRESSURE (PSIG)

LCC LF2 WCC WC6 WC9C12A(2)

CF8(2)

or 304(2)CF8M(2)

or 316(2)CF3M 316L CG8M

317(2)

CF8C(2) 347

CK3MCuNCD3MN

CD3MWCuN

-20 to 100200300400500

22502250225022502250

22502250222022002200

22502250225022502250

22502250225022502250

22502250222021852175

22502250225022502250

22502010180016651560

22502075187017201600

22502075187017201600

20101710152514051320

22502075187017201600

22502075187017201600

22502150197518651800

22502220206519301815

22502250223520551945

600650700750800

22502250- - -- - -- - -

22002145207519051545

22502250214019051545

22502250220021852160

21652145212021202120

22502250220021852160

14801445141513801360

15101480145514301415

15101480145514301415

12451220120511801155

15101480145514301415

15101480145514301415

17301695166516451630

17301695166516451630

1865183018151800- - -

85090095010001050

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

203017601195810540

2030180014151005655

20301800141512601260

13251300128012451220

14001390137512601260

1400- - -- - -- - -- - -

1135- - -- - -- - -- - -

1400139013751260- - -

14001390137512601260

16251625141512601260

1625162514151260- - -

- - -- - -- - -- - -- - -

11001150120012501300

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

360- - -- - -- - -- - -

410- - -- - -- - -- - -

1130835540- - -- - -

965770615500425

1145885695555435

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

1145885695555435

1170785565425285

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

1350140014501500

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

345285220155

360285220155

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

360285220155

195155115105

- - -- - -- - -- - -

- - -- - -- - -- - -

1. Table information is extracted from the Valve–Flanged, Threaded, andWelding End, ASME Standard B16.34-2013. These tables must be used in accordance with the ASME standard. TheASME standard states in paragraph “2.1.3 Special Class Valves. Threaded or welding end valves that conform to all the requirements of para. 2.1.2 and in addition have successfully passed theexaminations required by Section 8, may be designated Special Class valves.” The standard also stipulates that, “Special Class ratings shall not be used for flanged end valves.” Informationcopied with permission of the publisher; The American Society of Mechanical Engineers, 345 East 47th Street, New York, New York, 10017.2. At temperatures over 1000_F, usematerial only when carbon content is 0.04% or higher.

Page 10: Valve Pressure Rating

P/T Ratings for Valves (U.S. Units)D101463X012

Product Bulletin59.1:021September 2013

10

Standard Pressure-Temperature Ratings for CL1500 andCL2500 ValvesFisher valvematerials that conform to ASME B16.34-2013 Standard Class pressure-temperature ratings are listed intables 10 and 11. These ratings apply to all Fisher cast, forged, and fabricated steel valves.

Table 10. For ASME Standard CL1500 Valves(1)

SERVICETEMP (_F)

WORKING PRESSURE (PSIG)

LCC LF2 WCC WC6 WC9C12A(2)

CF8(2,3)

or304(2,3)

CF8M(2,3)

or 316(2,3)CF3M 316L CG8M

317(2,3)

CF8C(2,3) 347

CK3MCuNCD3MN

CD3MWCuN

-20 to 100200300400500

37503750364035203325

37053395327031703015

37503750364035203325

37503750361034653325

37503750364035303325

37503750364035303325

36003000269024852330

36003095279525702390

36003095279525702390

30002555228021001970

36003095279525702390

36003095279525702390

36003310308528802710

36003310308528802710

37503720333530702905

600650700750800

30252940- - -- - -- - -

28402745266525352055

30252940277525352055

30252940284026602540

30252940284026602540

30252940284026602540

22102160211020652030

22552210217021352110

22552210217021352110

18601825180017651730

22552210217021352110

22552210217021352110

25802530248524602435

25802530248524602435

2785273527102660- - -

85090095010001050

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

2435224515951080720

2435224519301335875

243522451936018201800

19801945191017701630

20902075193018201800

2090- - -- - -- - -- - -

1690- - -- - -- - -- - -

2090207519301820- - -

20902075193018201800

24252245193018201800

2425224519301820- - -

- - -- - -- - -- - -- - -

11001150120012501300

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

480- - -- - -- - -- - -

550- - -- - -- - -- - -

15101115720- - -- - -

12851030825670565

15251185925735585

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

15251185925735585

15601045755565375

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

1350140014501500

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

465380290205

480380290205

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

480380290205

255205155135

- - -- - -- - -- - -

- - -- - -- - -- - -

1. Table information is extracted from the Valve–Flanged, Threaded, andWelding End, ASME Standard B16.34-2013. These tables must be used in accordance with the ASME standard. Theuser is advised that a valve used under the jurisdiction of the ASME Boiler and Pressure Vessel Code, ASME Code for Pressure Piping, or governmental regulations is subject to any limitation ofthat code or regulation. This includes anymaximum temperature limitation for amaterial or rule governing the use of amaterial at a low temperature.” Information copied with permission ofthe publisher; The American Society of Mechanical Engineers, 345 East 47th Street, New York, New York, 10017.2. Flanged end ratings terminate at 1000_F.3. At temperatures over 1000_F, usematerial only when carbon content is 0.04% or higher.

Page 11: Valve Pressure Rating

P/T Ratings for Valves (U.S. Units)D101463X012

Product Bulletin59.1:021

September 2013

11

Table 11. For ASME Standard CL2500 Valves(1)

SERVICETEMP (_F)

WORKING PRESSURE (PSIG)

LCC LF2 WCC WC6 WC9C12A(2)

CF8(2,3)

or304(2,3)

CF8M(2,3)

or 316(2,3)CF3M 316L CG8M

317(2,3)

CF8C(2,3) 347

CK3MCuNCD3MN

CD3MWCuN

-20 to 100200300400500

62506250607058655540

61705655545052805025

62506250607058655540

62506250601557755540

62506250607058805540

62506250607058805540

60005000448041403880

60005160466042803980

60005160466042803980

50004260380035003280

60005160466042803980

60005160466042803980

60005520514048004520

60005520514048004520

62506200556051204840

600650700750800

50404905- - -- - -- - -

47304575442542303430

50404905463042303430

50404905473044304230

50404905473044304230

50404905473044304230

36803600352034403380

37603680362035603520

37603680362035603520

31003040300029402880

37603680362035603520

37603680362035603520

43004220414041004060

43004220414041004060

4640456045204430- - -

85090095010001050

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

40603745265518001200

40603745322022301455

40603745322030303000

33003240318029502715

34803460322030303000

3480- - -- - -- - -- - -

2820- - -- - -- - -- - -

3480346032203030- - -

34803460322030303000

40403745322030303000

4040374532203030- - -

- - -- - -- - -- - -- - -

11001150120012501300

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

800- - -- - -- - -- - -

915- - -- - -- - -- - -

251518551200- - -- - -

2145171513701115945

2545197015451230970

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

2545197015451230970

260017451255945630

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

1350140014501500

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

770630485345

800630485345

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

800630485345

430345255230

- - -- - -- - -- - -

- - -- - -- - -- - -

1. Table information is extracted from the Valve–Flanged, Threaded, andWelding End, ASME Standard B16.34-2013. These tables must be used in accordance with the ASME standard. Theuser is advised that a valve used under the jurisdiction of the ASME Boiler and Pressure Vessel Code, ASME Code for Pressure Piping, or governmental regulations is subject to any limitation ofthat code or regulation. This includes anymaximum temperature limitation for amaterial or rule governing the use of amaterial at a low temperature.” Information copied with permission ofthe publisher; The American Society of Mechanical Engineers, 345 East 47th Street, New York, New York, 10017.2. Flanged end ratings terminate at 1000_F.3. At temperatures over 1000_F, usematerial only when carbon content is 0.04% or higher.

Page 12: Valve Pressure Rating

P/T Ratings for Valves (U.S. Units)D101463X012

Product Bulletin59.1:021September 2013

12

Special Pressure-Temperature Ratings for CL1500 andCL2500 Threaded orWelding End ValvesFisher valvematerials that conform to ASME B16.34-2013 Special Class pressure-temperature ratings are listed intables 12 and 13. These ratings apply to all Fisher cast, forged, and fabricated steel valves. Nondestructive examinationapplies (Fisher Process Level 6).

Table 12. For ASME Special CL1500 Valves(1)

SERVICETEMP (_F)

WORKING PRESSURE (PSIG)

LCC LF2 WCC WC6 WC9C12A(2)

CF8(2)

or 304(2)CF8M(2)

or 316(2)CF3M 316L CG8M

317(2)

CF8C(2) 347

CK3MCuNCD3MN

CD3MWCuN

-20 to 100200300400500

37503750375037503750

37503750370036653665

37503750375037503750

37503750375037503750

37503750369536403620

37503750375037503750

37503350300027702600

37503455312028652665

37503455312028652665

33502855254523452195

37503455312028652665

37503455312028652665

37503585329531053000

37503695344032153025

37503750372534303240

600650700750800

37503750- - -- - -- - -

36653575345531702570

37503750356531702570

37503750366536453600

36053580353535353535

37503750366536453600

24652410235523052265

25202465242523852355

25202465242523852355

20752035201019701930

25202465242523852355

25202465242523852355

28802825277027452720

28802825277027452720

3105305530253000- - -

85090095010001050

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

3385293519951350900

33853000236016701095

33853000236021052105

22102170213020752035

23302315229021052105

2330- - -- - -- - -- - -

1890- - -- - -- - -- - -

2330231522902105- - -

23302315229021052105

27052705236021052105

2705270523602105- - -

- - -- - -- - -- - -- - -

11001150120012501300

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

600- - -- - -- - -- - -

685- - -- - -- - -- - -

18851395900- - -- - -

160512851030835705

190514801155920730

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

190514801155920730

19501305945705470

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

1350140014501500

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

580470365260

600470365260

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

600470365260

320255195170

- - -- - -- - -- - -

- - -- - -- - -- - -

1. Table information is extracted from the Valve–Flanged, Threaded, andWelding End, ASME Standard B16.34-2013. These tables must be used in accordance with the ASME standard. TheASME standard states in paragraph “2.1.3 Special Class Valves. Threaded or welding end valves that conform to all the requirements of para. 2.1.2 and in addition have successfully passed theexaminations required by Section 8, may be designated Special Class valves.” The standard also stipulates that, “Special Class ratings shall not be used for flanged end valves.” Informationcopied with permission of the publisher; The American Society of Mechanical Engineers, 345 East 47th Street, New York, New York, 10017.2. At temperatures over 1000_F, usematerial only when carbon content is 0.04% or higher.

Page 13: Valve Pressure Rating

P/T Ratings for Valves (U.S. Units)D101463X012

Product Bulletin59.1:021

September 2013

13

Table 13. For ASME Special CL2500 Valves(1)

SERVICETEMP (_F)

WORKING PRESSURE (PSIG)

LCC LF2 WCC WC6 WC9C12A(2)

CF8(2)

or 304(2)CF8M(2)

or 316(2)CF3M 316L CG8M

317(2)

CF8C(2) 347

CK3MCuNCD3MN

CD3MWCuN

-20 to 100200300400500

62506250625062506250

62506250617061056105

62506250625062506250

62506250625062506250

62506250616060656035

62506250625062506250

62505580500046204330

62505760520047754440

62505760520047754440

55804755424039053660

62505760520047754440

62505760520047754440

62505975549051805000

62506160573553555045

62506250620557155400

600650700750800

62506250- - -- - -- - -

61055960576052854285

62506250594052854285

62506250611060706000

60105965589558955895

62506250611060706000

41054020393038403770

41954105404039753930

41954105404039753930

34603395335032803215

41954105404039753930

41954105404039753930

48004710462045754530

48004710462045754530

5180509050455000- - -

85090095010001050

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

56454895332022501500

56455000393027851820

56455000393035053505

36853615355034603395

38853860381535053505

3885- - -- - -- - -- - -

3145- - -- - -- - -- - -

3885386038153505- - -

38853860381535053505

45104510393035053505

4510451039303505- - -

- - -- - -- - -- - -- - -

11001150120012501300

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

1000- - -- - -- - -- - -

1145- - -- - -- - -- - -

314523201500- - -- - -

26802145171513951180

31802465193015351215

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

31802465193015351215

3250218015701180785

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

1350140014501500

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

965785610430

1000785605430

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

1000785605430

535430320285

- - -- - -- - -- - -

- - -- - -- - -- - -

1. Table information is extracted from the Valve–Flanged, Threaded, andWelding End, ASME Standard B16.34-2013. These tables must be used in accordance with the ASME standard. TheASME standard states in paragraph “2.1.3 Special Class Valves. Threaded or welding end valves that conform to all the requirements of para. 2.1.2 and in addition have successfully passed theexaminations required by Section 8, may be designated Special Class valves.” The standard also stipulates that, “Special Class ratings shall not be used for flanged end valves.” Informationcopied with permission of the publisher; The American Society of Mechanical Engineers, 345 East 47th Street, New York, New York, 10017.2. At temperatures over 1000_F, usematerial only when carbon content is 0.04% or higher.

Page 14: Valve Pressure Rating

P/T Ratings for Valves (U.S. Units)D101463X012

Product Bulletin59.1:021September 2013

14

Standard and Special Pressure-Temperature Ratings forCL4500 ValvesFisher valvematerials that conform to ASME B16.34-2013 Standard and Special Class pressure-temperature ratings arelisted in tables 14 and 15. These ratings apply to all Fisher cast, forged, and fabricated steel valves. For Special Classpressure-temperature ratings, nondestructive examination applies (Fisher Process Level 6).

Table 14. For ASME Standard CL4500 Valves(1)

SERVICETEMP (_F)

WORKING PRESSURE (PSIG)

LCC LF2 WCC WC6 WC9C12A(2)

CF8(2,3)

or304(2,3)

CF8M(2,3)

or 316(2,3)CF3M 316L CG8M

317(2,3)

CF8C(2,3) 347

CK3MCuNCD3MN

CD3MWCuN

-20 to 100200300400500

112501125010925105559965

1111010185981595059040

112501125010925105559965

112501125010830104009965

112501125010925105859965

112501125010925105859965

108009000806574506985

108009290839077057165

108009290839077057165

90007670684063005905

108009290839077057165

108009290839077057165

108009935925086408135

108009935925086408135

11250111601001092158710

600650700750800

90708825- - -- - -- - -

85158240796076106170

90708825833076106170

90708825851579707610

90708825851579707610

90708825851579707610

66256480633561906085

67706625651564106335

67706625651564106335

55805470540052905185

67706625651564106335

67706625651564106335

77407595745073807310

77407595745073807310

8350821081357970- - -

85090095010001050

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

73056740478532402160

73056740579540102625

73056740579554505400

59405830572553154885

62656230579554505400

6265- - -- - -- - -- - -

5075- - -- - -- - -- - -

6265623057955450- - -

62656230579554505400

72706740579554505400

7270674057955450- - -

- - -- - -- - -- - -- - -

11001150120012501300

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

1440- - -- - -- - -- - -

1645- - -- - -- - -- - -

452533452160- - -- - -

38553085247020051695

45753550277522101750

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

45753550277522101750

46803135226516951130

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

1350140014501500

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

13901130875620

14401130875620

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

14401130875620

770615465410

- - -- - -- - -- - -

- - -- - -- - -- - -

1. Table information is extracted from the Valve–Flanged, Threaded, andWelding End, ASME Standard B16.34-2013. These tables must be used in accordance with the ASME standard. Theuser is advised that a valve used under the jurisdiction of the ASME Boiler and Pressure Vessel Code, ASME Code for Pressure Piping, or governmental regulations is subject to any limitation ofthat code or regulation. This includes anymaximum temperature limitation for amaterial or rule governing the use of amaterial at a low temperature.” Information copied with permission ofthe publisher; The American Society of Mechanical Engineers, 345 East 47th Street, New York, New York, 10017.2. Flanged end ratings terminate at 1000_F.3. At temperatures over 1000_F, usematerial only when carbon content is 0.04% or higher.

Page 15: Valve Pressure Rating

P/T Ratings for Valves (U.S. Units)D101463X012

Product Bulletin59.1:021

September 2013

15

Table 15. For ASME Special CL4500 Valves(1)

SERVICETEMP (_F)

WORKING PRESSURE (PSIG)

LCC LF2 WCC WC6 WC9C12A(2)

CF8(2)

or 304(2)CF8M(2)

or 316(2)CF3M 316L CG8M

317(2)

CF8C(2) 347

CK3MCuNCD3MN

CD3MWCuN

-20 to 100200300400500

1125011250112501125011250

1125011250111051099510995

1125011250112501125011250

1125011250112501125011250

1125011250110901091510865

1125011250112501125011250

1125010045900083157795

1125010365936086007995

1125010365936086007995

100458560763570306590

1125010365936086007995

1125010365936086007995

1125010750988593209000

11250110901032596459080

112501125011170102859725

600650700750800

1125011250- - -- - -- - -

10995107301036595157715

11250112501069095157715

1125011250109951093010800

1081510735106051060510605

1125011250109951093010800

73957230707069106790

75557395727071507070

75557395727071507070

62306105602559055785

75557395727071507070

75557395727071507070

86408480831582358155

86408480831582358155

9320916090809000- - -

85090095010001050

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

101608805598040502700

101609000707050153280

101609000707063106310

66306510639062306105

69906950687063106310

6990- - -- - -- - -- - -

5665- - -- - -- - -- - -

6990695068706310- - -

69906950687063106310

81158115707063106310

8115811570706310- - -

- - -- - -- - -- - -- - -

11001150120012501300

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

1800- - -- - -- - -- - -

2055- - -- - -- - -- - -

565541802700- - -- - -

48203855308525052120

57204435347027652185

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

57204435347027652185

58503920283021201415

- - -- - -- - -- - -- - -

- - -- - -- - -- - -- - -

1350140014501500

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

173514151095770

180014151095770

- - -- - -- - -- - -

- - -- - -- - -- - -

- - -- - -- - -- - -

180014151095770

965770580515

- - -- - -- - -- - -

- - -- - -- - -- - -

1. Table information is extracted from the Valve–Flanged, Threaded, andWelding End, ASME Standard B16.34-2013. These tables must be used in accordance with the ASME standard. TheASME standard states in paragraph “2.1.3 Special Class Valves. Threaded or welding end valves that conform to all the requirements of para. 2.1.2 and in addition have successfully passed theexaminations required by Section 8, may be designated Special Class valves.” The standard also stipulates that, “Special Class ratings shall not be used for flanged end valves.” Informationcopied with permission of the publisher; The American Society of Mechanical Engineers, 345 East 47th Street, New York, New York, 10017.2. At temperatures over 1000_F, usematerial only when carbon content is 0.04% or higher.

Page 16: Valve Pressure Rating

P/T Ratings for Valves (U.S. Units)D101463X012

Product Bulletin59.1:021September 2013

16

Emerson Process ManagementMarshalltown, Iowa 50158 USASorocaba, 18087 BrazilChatham, Kent ME4 4QZUKDubai, United Arab EmiratesSingapore 128461 Singapore

www.Fisher.com

The contents of this publication are presented for informational purposes only, and while every effort has beenmade to ensure their accuracy, they are notto be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales aregoverned by our terms and conditions, which are available upon request. We reserve the right tomodify or improve the designs or specifications of suchproducts at any time without notice.

E 1989, 2013 Fisher Controls International LLC. All rights reserved.

Fisher is amark owned by one of the companies in the Emerson Process Management business unit of Emerson Electric Co. Emerson Process Management,Emerson, and the Emerson logo are trademarks and servicemarks of Emerson Electric Co. All other marks are the property of their respective owners.

Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use ormaintenanceof any product. Responsibility for proper selection, use, andmaintenance of any product remains solely with the purchaser and end user.