Vacuum Box Systems
-
Upload
lillian-buchanan -
Category
Documents
-
view
96 -
download
1
description
Transcript of Vacuum Box Systems
Vacuum Box Systems
Vacuum Box Leak Detection Systems
Vacuum Box
Vacuum Box
To compliment our tank inspection equipment, Silverwing manufacture an extensive range of vacuum box systems
Vacuum Boxes are available for both floor-plate lap welds and shell to
annular welds
Vacuum Box
The open edge of the vacuum box incorporates a soft but hard wearing
neoprene seal so a vacuum can be generated within the box
Vacuum Box
All vacuum boxes are fitted with a calibrated vacuum relief valve to prevent damage or injury due to
excessive vacuum.
Vacuum Box
Standard High Pressure models produce a vacuum of 20 inch Hg for detection of smaller leaks
Vacuum Box
Two main types of Vacuum Box systems are available:
low pressure models produce a vacuum of 10 inch Hg and are best suited for new tank builds where large leaks are the main concern.
Vacuum Box
Two main types of Vacuum Box systems are available:
Vacuum boxes can be configured to run from
an electric vacuum pump or
from a compressed air supply
Vacuum Box
The V600E electric vacuum pump eliminates the need for a
compressor
Vacuum Box
The simple Vacuum Box test is highly effective and provides a rapid and economic way of evaluating the
Integrity of all types of weld
Vacuum Box
www.silverwinguk.com
NOT OPERATOR DEPENDENTTECHNOLOGY DRIVEN
Silverwing