USER’S GUIDE English - Support | Home | CASIOsupport.casio.com/pdf/008/WK210E1A_web.pdf ·...

GUÍA DEL USUARIO

USER’S GUIDE

ES

WK210ES1A

Guarde toda la información para futuras consultas.

Please keep all information for future reference.

Precauciones de seguridadAntes de intentar usar el teclado, asegúrese de leer las “Precauciones de seguridad” separadas.

Safety Precautions Before trying to use the keyboard, be sure to read the separate “Safety Precautions”.

En

glis

hE

spañ

ol

NOTICEThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.

FCC WARNINGChanges or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Declaration of ConformityModel Number: WK-210Trade Name: CASIO COMPUTER CO., LTD.Responsible party: CASIO AMERICA, INC.Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801Telephone number: 973-361-5400This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

En

glis

h

E-1

Important!Please note the following important information before using this product.

• Before using the optional AC Adaptor to power the unit, be sure to check the AC Adaptor for any damage first. Carefully check the power cord for breakage, cuts, exposed wire and other serious damage. Never let children use an AC adaptor that is seriously damaged.

• Never attempt to recharge batteries.• Do not use rechargeable batteries.• Never mix old batteries with new ones.• Use recommended batteries or equivalent types.• Always make sure that positive (+) and negative (–) poles are facing correctly as indicated near the battery compartment.• Replace batteries as soon as possible after any sign they are getting weak.• Do not short-circuit the battery terminals.• The product is not intended for children under 3 years.• Use only a CASIO AD-5 adaptor.• The AC adaptor is not a toy.• Be sure to disconnect the AC adaptor before cleaning the product.

This mark applies in EU countries only.

Manufacturer:CASIO COMPUTER CO.,LTD.6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan

Responsible within the European Union:CASIO EUROPE GmbHCasio-Platz 1, 22848 Norderstedt, Germany

Company and product names used in this manual may be registered trademarks of others. Any reproduction of the contents of this manual, either in part or its entirety, is prohibited. Except for your own, personal

use, any other use of the contents of this manual without the consent of CASIO is prohibited under copyright laws. IN NO EVENT SHALL CASIO BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION,

DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THIS MANUAL OR PRODUCT, EVEN IF CASIO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

The contents of this manual are subject to change without notice.

E-2

ContentsGeneral Guide ............................. E-4

Using the 10-key Pad (bs) .................................E-6

FUNCTION Button (ct) Functions .....................E-6

Getting Ready to Play ................ E-8Preparing the Music Stand .................................E-8

Power Supply .....................................................E-8

Playing the Digital Keyboard..... E-9Turning on Power and Playing ...........................E-9

Using Headphones.............................................E-9

Changing Keyboard Response to Touch Pressure (Touch Response)..................E-10

Adjusting Display Contrast ...............................E-10

Using the Voice Pads .......................................E-11

Using the Metronome .......................................E-12

Controlling the Keyboard Sounds..................... E-14

Select from a variety of musical instrument sounds...............................E-14

Layering Two Tones.........................................E-15

Splitting the Keyboard between Two Different Tones .........................................E-15

Using Reverb....................................................E-16

Using Chorus....................................................E-16

Using a Pedal ...................................................E-17

Changing the Pitch (Transpose, Tuning, Octave Shift)....................E-17

Sampling Sounds and Playing Them on the Digital Keyboard ....................... E-19

Connection and Preparation.............................E-19

Sampling and Playing a Melody Sound (Melody Sampling) ...........................................E-20

Incorporating a Sampled Sound into a Drum Set (Drum Sampling) ..............................E-22

Other Sampling Functions................................E-24

Playing Built-in Songs ............. E-27Playing the Demo Songs..................................E-27

Playing Back a Particular Song ........................E-28

Increasing the Selection of Songs (User Songs) ....................................................E-30

Using Built-in Songs to Master Keyboard Play ..............E-31

Phrases............................................................ E-31

Step Up Lesson Flow....................................... E-31

Selecting the Song, Phrase, and Part You Want to Practice................................ E-32

Lessons 1, 2, and 3.......................................... E-33

Lesson Settings ............................................... E-34

Using Auto Step Up Lesson............................. E-36

Music Challenge Keyboard Game ........................E-37

Using Auto Accompaniment....E-38Playing the Rhythm Part Only.......................... E-38

Playing All Parts............................................... E-39

Using Auto Accompaniment Effectively ........... E-41

Using One-Touch Preset ................................. E-42

Using Auto Harmonize ..................................... E-43

Editing Auto Accompaniment Patterns......................................E-44

Saving Keyboard Setups to Registration Memory ................E-48

To save a setup to registration memory........... E-49

To recall a setup from registration memory ..... E-49

Recording Your Keyboard Play...........................E-50

Recording and Playing Back Keyboard Play.................................................. E-50

Using Tracks to Record and Mix Parts ............ E-51

Recording Two or More Songs, and Selecting One for Playback.............................. E-53

Recording while Playing Along with a Built-in Song..................................................... E-53

Saving Recorded Data on an External Device................................................ E-54

En

glis

h

Contents

E-3

Other Useful Digital Keyboard Functions .................................. E-55

Changing the Scale of the Keyboard................E-55

Using Music Preset ..........................................E-56

Using the Arpeggiator.......................................E-56

Deleting User Song Data..................................E-57

Deleting All Data in Digital Keyboard Memory .................................E-58

Connecting External Devices ... E-59Connecting a Computer ...................................E-59

MIDI Settings....................................................E-60

Storing and Loading Digital Keyboard Memory Data.........................E-62

Connecting to Audio Equipment .......................E-63

Reference .................................. E-64Troubleshooting................................................E-64

Specifications ...................................................E-66

Operating Precautions......................................E-67

Error Messages ................................................E-68

Song List ..........................................................E-69

Chord Example List ..........................................E-70

MIDI Implementation Chart

Included Accessories Music Stand Song Book Leaflets

Items included as accessories are subject to change without notice.

Separately Available Accessories• You can get information about accessories that

are separately for this product from the CASIO catalog available from your retailer, and from the CASIO website at the following URL.

http://world.casio.com/

• Safety Precautions• Appendix• Other (Warranty, etc.)

E-4

General Guide• In this manual, the term “Digital Keyboard” refers to the WK-210.• In this manual, buttons and other controllers are identified using the numbers shown below.

1 32

4

5

6

bp

bq

br

7

8

bt ck cl cm cn co cp cq cr cs ct

9 bk bl bm bn

dk dkdl dm dn do dp

dq dr

bo

bs

En

glis

h

General Guide

E-5

1 POWER button E-9, 26, 46, 49, 51, 62

2 MAIN VOLUME knob E-9

3 MIC VOLUME knob E-19

4 PRESET SCALE button E-55

5 RECORDER button E-50, 51, 52, 53, 54

6 RHYTHM EDITOR button E-44, 45

7 METRONOME, BEAT button E-12

8 INTRO, REPEAT button E-29, 34, 41, 44, 45

9 NORMAL/FILL-IN, REW button E-28, 32, 38, 41, 44, 45

bk VARIATION/FILL-IN, FF button E-28, 32, 41, 44, 45

bl SYNCHRO/ENDING, PAUSE button E-28, 41, 42, 44, 45

bm START/STOP, PLAY/STOP button E-27, 28, 30, 33, 34, 38, 50, 52, 53, 54

bn ACCOMP ON/OFF, CHORDS, PART SELECT button E-27, 30, 32, 34, 39, 43, 44, 45, 54, 61

bo TEMPO buttons E-13, 29, 42

bp TONE, MUSIC PRESET button E-9, 14, 20, 22, 23, 24, 26, 56

bq RHYTHM, ONE TOUCH PRESET button E-11, 14, 21, 22, 24, 38, 42, 45, 49, 50, 53, 55

br SONG BANK button E-28, 30, 32, 37, 53

bs Number buttons, [–]/[+] buttons E-6

bt BANK, PAD SET SELECT, CHORD/TR1, LISTEN button E-11, 21, 33, 48, 49

ck Area1, VOICE PAD1, TR2, WATCH button E-11, 21, 33, 48, 49, 52

cl Area2, VOICE PAD2, TR3, REMEMBER button E-11, 21, 34, 48, 49, 52

cm Area3, VOICE PAD3, TR4, NEXT button E-11, 21, 32, 48, 49, 52

cn Area4, VOICE PAD4, TR5, AUTO button E-11, 21, 36, 48, 49, 52

co STORE, VOICE PAD5, TR6, MUSIC CHALLENGE button E-11, 21, 37, 49, 52

cp SPLIT button E-15, 16

cq LAYER button E-15, 18

cr AUTO HARMONIZE/ARPEGGIATOR, TYPE button E-43, 56, 57

cs SAMPLING button E-11, 20, 21, 22, 23, 49

ct FUNCTION button E-6

dk Speakers

dl Song Bank list

dm Music Preset list

dn Rhythm list

do Display

dp Tone list

dq CHORD root names E-39

dr Percussion instrument list E-14

ds USB port E-59

dt SUSTAIN/ASSIGNABLE JACK E-17

ek PHONES/OUTPUT jack E-9, 63

el AUDIO IN jack E-19, 63

em DC 9V terminal E-8

en MIC IN jack E-19

ds dt ek enemel

General Guide

E-6

Use the number buttons and the [–] and [+] buttons to change the settings of the parameters that appear in the upper left area of the display.

Use the number buttons to enter numbers and values.• Enter the same number of digits as the currently displayed

value.Example: To enter tone number 001, input 0 3 0 3 1.

• Negative values cannot be input using the number buttons. Use [–] (decrease) and [+] (increase) instead.

You can use the [–] (decrease) and [+] (increase) buttons to change the displayed number or value.• Holding down either button scrolls the displayed setting.• Pressing both buttons at the same time will revert to the

initial default setting or the recommended setting.

You can use the FUNCTION button (ct) to adjust the reverb effect, to delete data, and to perform a wide range of other Digital Keyboard operations.

1. Press ct to display the function menu.

2. Use the bs (10-key) [4] (o) and [6] (p) keys to display the function you want.• You can exit the function menu by pressing ct.• After selecting functions 8 through 12, press the bs

(10-key) [7] (ENTER) key to display the menu item’s submenu. Then use [4] (o) and [6] (p) to select an item. You can exit a submenu by pressing the bs (10-key) [9] (EXIT) key.

3. Refer to the indicated pages for details about each function.

Using the 10-key Pad (bs)

Number Buttons

[–] and [+] Buttons

S t . G r P n oSetting

FUNCTION Button (ct) Functions

To select a function

En

glis

h

General Guide

E-7

• The tone and other parameters revert to their initial defaults whenever you turn on power (page E-9).

Function DisplaySee

Page

1 Transpose Trans. E-17

2 Accompaniment Volume AcompVol E-42

3 Song Volume Song Vol E-30

4 Touch Response Touch E-10

5 Tuning Tune E-17

6 Reverb Reverb E-16

7 Chorus Chorus E-16

8 Sampling SAMPLING

Automatic Sampling Start AutoStrt E-24

Automatic Sampling Stop AutoStop E-25

Sampled Tone Protect (Protect) E-26

9 Step Up Lesson LESSON

Voice Fingering Guide Speak E-34

Note Guide NoteGuid E-35

Performance Evaluation Scoring E-35

Phrase Length PhraseLn E-35

10 Other Settings OTHER

Arpeggiator Hold ArpegHld E-57

Pedal Effect Jack E-17

Accompaniment Scale AcompScl E-55

LCD Contrast Contrast E-10

11 MIDI Settings MIDI

Keyboard Channel Keybd Ch E-60

Navigate Channels Navi. Ch E-60

Local Control Local E-61

Accomp Out AcompOut E-61

12 Delete DELETE

Sampled Sound Delete (tone name) E-25

User Rhythm Delete (rhythm name) E-47

User Song Delete (song name) E-57

All Data Delete All Data E-58

E-8

Getting Ready to Play

Either an AC adaptor or batteries can be used to power this Digital Keyboard. Normally, use of AC adaptor power is recommended.• The AC adaptor does not come with this Digital Keyboard.

Purchase it separately from your retailer. See page E-3 for information about options.

Use the AC adaptor when you want to power the Digital Keyboard from a household electrical outlet.

Specified AC Adaptor: AD-5

• Be sure to turn off Digital Keyboard power before connecting or disconnecting the AC adaptor.

• Be sure to turn off power before loading batteries.• It is up to you to prepare six commercially available

D-size batteries. Do not use oxyride batteries or any other nickel based batteries.

1. Open the battery cover on the bottom of the Digital Keyboard.

2. Load six D-size batteries into the battery compartment.Make sure the positive + and negative - ends of the batteries are facing as shown in the illustration.

3. Insert the tabs of the battery cover into the holes on the side of the battery compartment, and close the cover.

Low Battery IndicationThe indicator shown below starts to flash to let you know when battery power is low. Replace the batteries with new ones.

Preparing the Music Stand

Power Supply

Using the AC Adaptor

Music stand

Household power outlet

AC adaptorDC 9V terminal

Using Batteries

Tabs

Low battery indicator (flashes)

En

glis

h

E-9

Playing the Digital Keyboard

1. Press 1.This turns on power.

2. Try playing something on the keyboard. Use 2 to adjust volume.

• Turning off the Digital Keyboard causes most current settings to be cleared. The Digital Keyboard will revert to initial settings the next time you turn it on.

• This is true for all settings except for sample sound protection. Once you turn it on it remains on until you turn it off again.

While you are using batteries for power, power will turn off automatically if you do not perform any operation for about six minutes. Auto Power Off is disabled while the AC adaptor is being used for power.

Disabling Auto Power OffYou can disable Auto Power Off to ensure that power is not turned off automatically during a concert, etc.

1. While holding down bp, turn on power.Auto Power Off will be disabled.

Using headphones cuts off output from the built-in speakers, which means you can practice playing even late at night without disturbing others.• Be sure to turn down the volume level before connecting

headphones.

• Headphones do not come with the Digital Keyboard.• Use commercially available headphones. See page E-3 for

information about options.

• Do not listen to very high volume output over headphones for long period. Doing so creates the risk of hearing damage.

• If you are using headphones that require an adaptor plug, make sure you do not leave the adaptor plugged in when removing the headphones.

1122 77

bobo

bsbsbpbp

ctctcscsbtbtckckclclcmcmcncncoco

bqbq

Turning on Power and Playing

Auto Power Off (Using Batteries)

IncreaseDecrease

Using Headphones

PHONES/OUTPUT jack


E-10

Touch Response alters tone volume in accordance with keyboard pressure (speed). This provides you some of the same expressivity you get on an acoustic piano.

Sound intensity depends on the speed that keys are pressed.

People normally believe that the stronger the pressure applied to a piano keyboard, the louder the sound. Actually, however, the intensity of the notes played depends on the speed at which keys are pressed. Notes are louder when keys are pressed quickly, and quieter when keys are pressed slowly. Keeping this in mind as you play a keyboard musical instrument lets you control note volume without striving to apply too much pressure with your fingertips.

The playability of an acoustic pianoYour Digital Keyboard provides you with key touch that is the next best thing to an acoustic piano. Note volume changes automatically in accordance with key press speed.

Use the procedure below to control how much the volume of played notes change in accordance with playing speed. Select the setting that best matches your playing style.

1. Press ct and then use the bs (10-key) [4] (o) and [6] (p) keys to display “Touch” (page E-6).

2. Use bs (10-key) [–] and [+] keys to select one of the three Touch Response sensitivity settings.

1. Press ct and then use the bs (10-key) [4] (o) and [6] (p) keys to display “OTHER” (page E-6).

2. Press bs (10-key) [7] (ENTER) key.

3. Use the bs (10-key) [4] (o) and [6] (p) keys to display “Contrast”.

4. Use the bs (10-key) [–] and [+] keys to adjust the contrast.• The contrast setting range is 01 to 17.

Changing Keyboard Response to Touch Pressure (Touch Response)

Keyboard Instrument Sound Intensity

Pressing fast produces louder notes.

Pressing slowly produces softer notes.

Do not try to use too much pressure.

Changing Touch Response Sensitivity

Off (oFF) Touch Response is turned off. Sound volume is fixed, regardless of key press speed.

Type 1 (1) Normal Touch Response

Type 2 (2) More sensitive Touch Response than Type 1

Adjusting Display Contrast

T o u c h

Indicator disappears when Touch Response is turned off.

O T H E R

Flashes

C o n t r a s t

En

glis

h


E-11

You can use the voice pads to sound various sound effects or even sounds you have sampled (page E-19). Use the voice pads to add something extra to your performances.

1. Press bq.

2. Press cs and ct at the same time to enable the voice pads.

• Pressing cs and ct at the same time again will disable the voice pads.

• Be sure to make sure the voice pad function is enabled before performing the next step. While voice pads are disabled, buttons bt through co function as registration memory buttons (page E-48). Performing the following step with voice pads disabled will change the setup of the keyboard (tone number, rhythm number, etc.).

3. Press a voice pad (1 through 5, ck through co) to sound what is assigned to it.There are four sets of voice pad sounds numbered 1 through 4 (see below). Each press of bt cycles through sound sets 1 through 4.

Example: When Set 2 is selected

• While a sound set number is displayed, you can change it using bs (10-key). If you do not perform any operation for a few seconds after the indicator appears, the display will return to the previous screen automatically.

Using the Voice Pads

Lit when on

Pad 1 Pad 2 Pad 3 Pad 4 Pad 5

Set 1 VOICE 1(Tone 571)*1

VOICE 2(Tone 572)*1

VOICE 3(Tone 573)*1

VOICE 4(Tone 574)*1

VOICE 5(Tone 575)*1

Set 2 Set 1 at various pitches*2

Set 3 Same as Set 1 Set 1 sound, repeated*3

Set 4 APPLAUSE GUNSHOT BONGO CONGA TAMBOURINE

*1: If you performed melody sampling (page E-20) and assigned the results to these tone numbers, the pad will output the sampled sound.

*2: Pad 1: Perfect fifth up; Pad 2: Perfect fifth down; Pad 3: Same as Set 1; Pad 4: Starting from a major third down, gradually raises the pitch; Pad 5: Starting from one octave up, gradually lowers the pitch

*3: Pad 3 gradually raises the pitch

bt ck cl cm cn co

P a d S e t


E-12

After performing melody sampling to tone number 571 through 575, the corresponding tones are replaced with the samples in Sets 1, 2, and 3 of the voice pads described in the previous section. For more information about melody sampling, see page E-20.• Deleting sampled data will return the Voice Pads to their

default sounds. For more information about deleting sampled data, see page E-25.

You can use the following procedure to adjust the volume levels of the voice pad sounds to match them to other sounds (keyboard, etc.).

1. Enable the voice pads.• See steps 1 and 2 of the procedure on page E-11.

2. While holding down bt, hold down the voice pad (ck through co) whose volume you want to adjust.• Keep bt and the voice pad depressed as you perform

the next step.Example: To select cl (Pad 2).

3. While still holding down the two buttons, keep pressing and releasing any keyboard key.• Each press of the keyboard key will sound the tone

assigned to the voice pad. As you listen to the tone, adjust its volume by altering the speed at which you are pressing the keyboard key. Pressing at a faster rate will raise the volume, while a slower rate will lower the volume.

4. After the tone is at the volume you want, release the two buttons you depressed in step 2.

• You can batch adjust the volume level of more than one voice pad by holding down more than one voice pad along with bt in step 2 above.

The metronome lets you play and practice along with a steady beat to help keep you on tempo.

1. Press 7.This starts the metronome.

2. Press 7 again to stop the metronome.

You can configure the metronome to use a bell sound for the first beat of each measure of the song you are playing.• You can specify 0, or a value from 2 to 6 as the number of

beat per measure.• When playing a built-in song, the beats per measure setting

(which determines when the bell sounds) is configured automatically for the currently selected song.

1. Hold down 7 until the beats per measure setting screen appears on the display.

• If you do not perform any operation for a few seconds after the beats per measure setting screen appears, the display will return to the screen displayed before you pressed 7.

2. Use bs (10-key) to enter the number of beats per measure.• The bell will not sound if you specify 0 for this setting. In

this case, all beats are indicated by a click sound. This setting lets you practice with a steady beat, without worrying how many beats there are in each measure.

Sounding Sampled Sounds with the Voice Pads

Adjusting the Volume Levels of Voice Pads

bt cl

Using the Metronome

Start/Stop

Changing the Beats Per Measure

This pattern changes with each beat.

B e a t

En

glis

h


E-13

Use the following procedure to change the tempo of the metronome.

1. Press bo.Use y (slower) and t (faster) to change the tempo setting. Holding down either button changes the setting at high speed.• Pressing t and y at the same time will initialize the

tempo setting in accordance with the currently selected song or rhythm.

• Pressing bo causes the tempo value to flash on the display. While the tempo value is flashing, you can use bs (10-key) to change it.Note that you must input leading zeros, so 89 is input as 089.

• The tempo value will stop flashing if you do not perform any operation for a short while.

The metronome volume setting is changed automatically with the volume level of the currently selected Auto Accompaniment or song. The metronome volume cannot be adjusted independently.• For information about changing the Auto Accompaniment

volume, see page E-42.• For information about changing the song volume, see page

E-30.

• You cannot adjust the balance between the metronome and note volume during Auto Accompaniment and built-in tune play.

Changing the Metronome Tempo

Changing the Metronome Sound Volume

Tempo value (flashes)

E-14

Controlling the Keyboard Sounds

Your Digital Keyboard lets you select tones for a wide variety of musical instrument sounds, including violin, flute, orchestra, and more. Even the same song sound takes on a different feel by changing the instrument type.

1. Press bp.

2. Use bs (10-key) to select the tone number you want.The corresponding tone number and tone name will appear on the screen.

• See the separate “Appendix” for a complete list of available tones.

• Use the number buttons to enter the tone number. Specify three digits for the tone number.Example: To select 001, enter 0 3 0 3 1.

• When one of the drum sets is selected, each keyboard key is assigned a different percussion sound.

3. Try playing something on the keyboard.The tone of the instrument you selected will sound.

1. Press bp and bq at the same time.This selects the grand piano tone.

Settings

bsbsbpbp

cpcp cqcq ctct

bqbq

Select from a variety of musical instrument sounds

To select an instrument for playing

S t . G r P n oTone nameTone number Playing with a Piano Tone (Piano Setup)

Tone Number : “001”Reverb : “06”Transpose : 00Touch Response : Off: Returns to initial default

On: No changePedal Effect : SUSRhythm Number : “161”Accompaniment : Rhythm part onlyLocal Control : OnDrum Assign : OffSplit : OffLayer : OffChorus : OffOctave Shift (Upper) : 0Auto Harmonize : OffArppegiator : OffScale : Equal

En

glis

h


E-15

You can use the following procedure to layer two different tones (such as piano and strings) so they sound simultaneously when you press a keyboard key.

1. Select the first tone you want to use.Press bp and then use bs (10-key) to select the tone you want.Example: 021 ELEC.PIANO 1

2. Press cq.

3. Use bs (10-key) to select the second tone you want.Example: 175 STRINGS

4. Play something on the keyboard.Both tones sound at the same time.

5. Pressing cq again to unlayer the keyboard (so it plays only the tone you selected in step 1).• Each press of cq toggles between layered (two tones)

and unlayered (one tone).

You can use the procedure below to assign different tones to the right range and left range of the keyboard, so it sounds like you are playing an ensemble between two instruments.

1. Select the tone for the right side range (page E-14).Press bp and then use bs (10-key) to select the tone you want.Example: 273 FLUTE 1

2. Press cp.

3. Use bs (10-key) to select the left side range tone you want.Example: 046 VIBRAPHONE 1

4. Play something on the keyboard.This will sound the tones assigned to the left and right side ranges of the keyboard.

Layering Two Tones

E . P i a n o 1

Lights

S t r i n g s

Disappears

Splitting the Keyboard between Two Different Tones

To select the two tones for a split keyboard

F l u t e 1

Lights

V i b e s 1

Split point

F3

VIBRAPHONE 1 FLUTE 1


E-16

5. Pressing cp again to unsplit the keyboard (so it plays only the tone you selected in step 1).• Each press of cp toggles between split (two tones) and

unsplit (one tone).

• If you turn on both layer and split, layering will be applied to the right side range of the keyboard only.

1. While holding down cp, press the keyboard key where you want the split point to be.The key you press will become the lowest note of the right side range of the split keyboard.Example: Setting middle C (C4) as the split point.

Reverb adds reverberation to notes. You can change the duration of the reverb.

1. Press ct and then use the bs (10-key) [4] (o) and [6] (p) keys to display “Reverb” (page E-6).

2. Use the bs (10-key) [–] and [+] keys to select the reverb setting you want.

Chorus is a function that adds depth and breadth to notes. It makes you sound as if you are playing multiple instruments.

1. Press ct and then use the bs (10-key) [4] (o) and [6] (p) keys to display “Chorus” (page E-6).

2. Use the bs (10-key) [–] and [+] keys to select the chorus type you want.There are five chorus types, plus an off setting.

• The actual effect produced by chorus depends on the tone you are using.

To change the split point

Disappears

C 4 Key name

Using Reverb

Off (oFF) Turns off reverb.

1 to 10 The larger the number selected, the longer the reverb duration.

Using Chorus

R e v e r b

R e v e r b Indicator disappears when reverb is turned off.

C h o r u s

C h o r u s Indicator disappears when chorus is turned off.

En

glis

h


E-17

A pedal can be used to change notes in various ways while playing.• A pedal unit does not come with the Digital Keyboard.

Purchase one separately from your retailer. See page E-3 for information about options.

Connect an optional pedal unit.



3. Use the bs (10-key) [4] (o) and [6] (p) keys to display “Jack”.

4. Use the bs (10-key) [–] and [+] keys to select the pedal effect you want.• The following shows the available pedal effects.

The transpose feature lets you change the pitch, in semitone steps. A simple operation lets you instantly change the pitch to match that of a singer.• The transpose setting range is –12 to +12 semitones.

1. Press ct.

2. Use the bs (10-key) [–] and [+] keys to select the transpose setting you want.

Use the tuning feature when you need to adjust the pitch slightly to play along with another musical instrument. Also, some artists perform their music with slightly altered tuning. You can use the tuning feature to adjust tuning so it exactly matches a performance on a CD.• The tuning setting range is –99 to +99 cents.

1. Press ct and then use the bs (10-key) [4] (o) and [6] (p) keys to display “Tune” (page E-6).

2. Use the bs (10-key) [–] and [+] keys to adjust the tuning.

Using a Pedal

Connecting a Pedal Unit

Selecting the Pedal Effect

Sustain (SUS)

Sustains notes played while the pedal is depressed. Organ and other similar tone notes are sustained even if the pedal is not pressed.

Sostenuto (SoS)

Sustains notes that are playing when the pedal is depressed before the keyboard keys are released.

Soft (SFt)

Slightly softens notes played while the pedal is depressed.

Rhythm (rHy)

Pressing the pedal starts and stops Auto Accompaniment or song playback.

SUSTAIN/ASSIGNABLE JACK

O T H E R

Flashes

J a c k

Changing the Pitch (Transpose, Tuning, Octave Shift)

Changing the Pitch in Semitone Steps (Transpose)

Fine Tuning (Tuning)

T r a n s .

T u n e


E-18

Octave Shift lets you raise or lower the pitch of the keyboard notes in octave units.• The octave shift setting range is –2 to +2 octaves.• When using Split (page E-15), you can individually set the

left and right keyboard ranges to the pitches you want.

1. Keep pressing cq until the screen shown below appears on the display.If you want to use Split, turn on Split before pressing cq.• If you do not perform any operation for a few seconds

after this screen appears, the display will return to the previous screen automatically.

2. Use the bs (10-key) [–] and [+] keys to shift the octave.

3. Press cq.

4. Press cq again.

Octave Shift

• Split On : This step affects the right side keyboard range only.

• Split Off : This step affects the entire keyboard range.

• Split On : The screen shown below will appear. Use the bs (10-key) [–] and [+] keys to shift the octave for the left side keyboard range.

• Split Off : The screen shown below will appear. Advance to step 4.

O c t U p p e r

O c t L o w e r

En

glis

h

E-19

Sampling Sounds and Playing Them on the Digital Keyboard

You can sample sounds from a microphone, from a portable audio player, or other device, and then play the sound on the keyboard or voice pads. For example, you could sample the bark of your dog and then use the sound in a melody. You also can sample and use passages from a CD. The sampling feature is a great way to create new sounds that are highly creative.

• Before connecting, make sure that the Digital Keyboard, external devices, and/or the microphone all are turned off.

1. Connect a microphone or external device to the Digital Keyboard.

• You also could connect a commercially available microphone.

• Connection of an external device requires commercially available connecting cords, supplied by you. Connecting cords should have a stereo mini plug on one end and a plug that matches the configuration of the external device on the other end.

2. Turn down the volume levels of the external device and the Digital Keyboard.

3. Turn on the external device or microphone, and then turn on the Digital Keyboard.• When using a microphone, adjust the input volume

level with 3.

• It will take a few seconds after you turn on the Digital Keyboard before you will be able to use the microphone.

• Sampled sounds are recorded in monaural.

11 bsbsbpbp

btbtckckclclcmcmcncncoco ctctcscs

bqbq33

Connection and Preparation

MIC IN jack

Digital Keyboard AUDIO IN jack

Stereo mini plug

CD player, Cassette player, etc.


E-20

Use the procedures in this section to sample a sound and play it as the melody part on the Digital Keyboard.• Up to five sampled sounds can be stored in Digital

Keyboard memory as tone numbers 571 through 575. Simply select the tone number where the sound you want is located to assign the sound to the keyboard.

1. Press bp and then use bs (10-key) to enter the tone number 571 to 575 where you want to store the sampled sound.

• In place of the above steps, you could press cs and bp at the same time and then select a tone number.

2. Press cs.This enters sampling standby.The allowable sampling time (in seconds) will appear on the display momentarily and then the display will change to the following.

3. Output the sound from the external device. In the case of a microphone, output the sound in the direction of the microphone.Sampling will start automatically.

4. After the sound you want to sample is finished, press cs.Sampling will stop when you release cs.• Even if you do not press cs, sampling will stop

automatically whenever there is no more sound being input from the external device or microphone. Sampling also will stop automatically 10 seconds after it is started.

5. Play something on the Digital Keyboard.• You can press voice pad 1 through 5 (ck through co) to

sound the sampled sound. For more information about the relationship between tone numbers and voice pads, see page E-11.

• You may not be able to get 10 seconds of sampling if Digital Keyboard memory is low due to storage of other data. If this happens, deleting other memory data you no longer need will free up memory space and you should be able to sample for 10 seconds. See “Deleting a Sampled Sound” on page E-25 for more information.

• Sampling sound and storing it will delete any sound data currently stored under the same tone number. To help ensure that you do not accidentally delete important data, be sure to read “Protecting Against Accidental Deletion of Sampled Sounds” on page E-26.

Sampling and Playing a Melody Sound (Melody Sampling)

To sample a sound

N o D a t a

No sampled sound stored

Lights

W a i t i n g

Flashes

S a m p l i n g

Flashes

S 1 : O r g n l

Sampled sound 1

Used memory(Unit: Kbytes)

Remaining memory capacity

En

glis

h


E-21

How sampled sounds are playedPressing Middle C (C4) will play back the original sound. The keys to the left and right of C4 play the sound at different pitches.

You can use the following procedure to loop a sampled sound so it continues to repeat, as you play on the Digital Keyboard.

1. Press bq.

2. While holding down cs, press bt.This enters repeat standby.

3. Press the button (ck to co) that corresponds to the melody sampling tone number you want to select.This will start looped playback of the selected sound.

4. Press the same button again to stop playback.

5. Press bt to return to the screen that was displayed before step 2 of this procedure.

You can use the following procedure to change the volume level of the looped playback of each sampled sound, if you want.

1. Press the button of the sampled sound whose volume you want to change (ck to co).• This will cause the sound’s loop to sound.

2. While the loop is sounding hold down the same sampled sound button (ck to co) as you press any keyboard key.• Pressing the keyboard key quickly will increase sample

sound volume, while pressing slowly will decrease volume.

3. After the sampled sound is at the volume level you want, release its button (ck to co).

Looping a Sampled Sound

To select this tone number: Press this button:

571 ck

572 cl

573 cm

574 cn

575 co

C4

F u n k 8 B tLights

Changing the Volume of Sampled Sound Looped Playback


E-22

You can apply various effects to sampled sounds.

1. Press bp and then use bs (10-key) to enter the tone number 571 to 575 to which you want to apply effects.

2. Press bp to cycle thorough the available effects, described below.

• Avoid assigning the same sampled sound to the keyboard for play along and for looped play. Doing so will cause, the Loop 1 effect to be applied to the keyboard tone while looped play of the sampled sound is being performed.

You can use the procedure to change the drum sounds that are assigned to each keyboard key.• You can store up to three drum sets and store them as tone

numbers 576, 577, and 578. Simply select the tone number where the drum set you want is located to assign the drum set sounds to the keyboard.

1. Press bq.bq lights.

2. Press bp and then use bs (10-key) to enter the tone number 576, 577, or 578 for the drum set whose sounds you want to change.

• In place of the above steps, you could press cs and bq at the same times and then select a tone number.

3. Press cs.

4. Press the keyboard key to which you want to assign the drum sound you are about to sample.This enters sampling standby.The allowable sampling time (in seconds) will appear on the display momentarily and then the display will change to the following.

5. Output the sound from the external device. In the case of a microphone, output the sound in the direction of the microphone.Sampling will start automatically.

Applying Effects to a Sampled Sound

Effect Type(Display)

Description

Original (Orgnl)Normal sampled tone (no looping, no effect).

Loop 1 (Loop1) Loops the sampled sound.

Loop 2 (Loop2)Loops the sample sound and raises the pitch of the resonating sound when the keyboard key is released.

Loop 3 (Loop3)Loops the sample sound and lowers the pitch of the resonating sound when the keyboard key is released.

Pitch 1 (Ptch1)Changes the pitch from low to high, at an increasing rate.

Pitch 2 (Ptch2)Changes the pitch from high to low, at a decreasing rate.

Pitch 3 (Ptch3)Changes the pitch from high to low, at a decreasing rate, and then raises the pitch when the key is released.

Tremolo (Treml) Alternates volume between high and low.

Funny 1 (Funy1)Adds vibrato and changes the pitch by a gradually increasing amount.

Funny 2 (Funy2)Alternates between high pitch and low pitch.

Funny 3 (Funy3)Adds vibrato and changes the pitch from low to high.

Incorporating a Sampled Sound into a Drum Set (Drum Sampling)

N o D a t aLights

N o D a t aFlashes

W a i t i n g

Flashes

S a m p l i n g

Flashes

En

glis

h


E-23

6. After the sound you want to sample is finished, press cs.

Sampling will stop when you release cs.• Even if you do not press cs, sampling will stop

automatically whenever there is no more sound being input from the external device or microphone. Sampling also will stop automatically 10 seconds after it is started.

7. Press the keyboard key.

• You can repeat steps 3 through 6 to change other sounds that make up the currently selected drum set. There are eight sounds per drum set.

• You may not be able to get 10 seconds of sampling if Digital Keyboard memory is low due to storage of other data. If this happens, deleting other memory data you no longer need will free up memory space and you should be able to sample for 10 seconds. See “Deleting a Sampled Sound” on page E-25 for more information.

• Sampling a sound will delete any sound data currently assigned to the same keyboard key. To help ensure that you do not accidentally delete important data, be sure to read “Protecting Against Accidental Deletion of Sampled Sounds” on page E-26.

You can use the procedures in this section to copy the drum sound assigned to one keyboard key to another key, to change the pitch of a sound, and to delete a sampled sound.

1. Press bp and then use bs (10-key) to enter the tone number 576, 577, or 578 for the drum set you want.

2. Press cs.

3. Press ct.

This is the editing mode.• While in the editing mode, you can copy a sound,

change the pitch of a sound, or delete a sound (each of which is described below). Pressing ct again exits the editing mode and returns to step 2 of this procedure.

To copy a sampled sound from one key to another

While holding down the keyboard key to which the sampled sound you want to copy is assigned, press the keyboard key to which you want to copy it.

Example: To copy sampled sound of key C4 to key D4

• A keyboard key that already has a sampled sound assigned cannot be selected as a copy destination.

S m p l D r m 1Remaining memory capacity

Used memory(Unit: Kbytes)

Editing Sampled Drum Set Sounds

S m p l D r m 1Flashes at high speed

Indicates keyboard keys that have sounds assigned.

Indicates the keyboard key whose sound was copied.


E-24

To change the pitch of a sampled soundWhile holding down the keyboard key of the sampled sound whose pitch you want to change, use the bs (10-key) [–] and [+] keys to change the pitch.• You can change the pitch within a range of –64 to 63

semitones.

To delete a keyboard key’s sampled soundWhile holding down the keyboard key whose sound you want to delete, press bq. In response to the “DelSure?” message that appears, press the bs (10-key) [+] button to delete, or [–] to cancel the delete operation.• Deleting a sampled sound will return the key to its initial

default built-in sound.Example: To delete the sound assigned to key D4

Use the following procedure to change the rhythm part of an Auto Accompaniment pattern to a drum set sound that you sampled.

1. Press bq and then use bs (10-key) to enter the rhythm number of the Auto Accompaniment pattern you want.You cannot use a Drum Sampling Tone in a user rhythm, so do not select a user rhythm in the above step.

2. Press bp and then use bs (10-key) to enter the tone number of the sampling drum set that contains the sound you want to use.

3. Press bp.This changes the rhythm part of the Auto Accompaniment pattern you selected in step 1 to the sampled sound you selected in step 2.• To change the Auto Accompaniment rhythm part back

to its original sound, press bp again.

• Some rhythm part drum sounds cannot be replaced by sampled sounds.

Normally when the Digital Keyboard is in sampling standby, it will start sampling automatically whenever it detects sound input. You can use the following procedure to enable manual sampling start, which will cause sampling to wait until you press a button to start it. You can use this to insert silence before the sampled sound.

1. Press ct and then use the bs (10-key) [4] (o) and [6] (p) keys to display “SAMPLING” (page E-6).

2. Press the bs (10-key) [7] (ENTER) key.

3. Press the bs (10-key) [–] key to turn off automatic sampling start.This enables manual sampling start, which operates as described below.• Melody sampling (page E-20):

Sampling starts when you release cs, which you press in step 2 of the sampling procedure.

• Drum sampling (page E-22):Sampling starts when you release the Digital Keyboard key you press in step 4 of the sampling procedure.

• When manual sampling start is enabled, sampling starts when you release cs or the keyboard key, not when you press it. Sampling does not start if you hold down the button or key.

Using a Drum Sampling Tone in Auto Accompaniment (Drum Assign)

Disappears

Other Sampling Functions

Changing to a Manual Sampling Start

S A M P L I N G

Flashes

A u t o S t r t

En

glis

h


E-25

Normally the Digital Keyboard will stop sampling automatically whenever it detects there is no sound input. You can use the following procedure to enable manual sampling stop, which will cause sampling to continue until you press a button to stop it. You can use this to insert silence after the sampled sound.



3. Press the bs (10-key) [6] (p) key.

4. Press the bs (10-key) [–] key to turn off automatic sampling stop.Even when there is no sound input from an external device, sampling will continue until you press and release cs or a keyboard key.

• When manual sampling stop is enabled, sampling stops when you release cs or the keyboard key, not when you press it. Sampling does not stop if you hold down the button or key.

You can use the following procedure to specify a sampled tone number and delete its data.

1. Press ct and then use the bs (10-key) [4] (o) and [6] (p) keys to display “DELETE” (page E-6).


3. Use the bs (10-key) [–] and [+] keys to select the tone number of the data you want to delete.

4. Press the bs (10-key) [7] (ENTER) key.This displays a delete confirmation message.

5. Press the bs (10-key) [+] (YES) key to delete the data, or [–] (NO) or [9] (EXIT) to cancel the delete operation.• After the delete procedure is complete, “Complete” will

appear on the display followed by the screen in step 2 of the above procedure.

• For information about deleting individual drum sounds in a drum sampling set, see “Editing Sampled Drum Set Sounds” on page E-23.

Changing to Manual Sampling Stop

A u t o S t o p

Deleting a Sampled Sound

D E L E T E

Flashes

S 1 : O r g n lUsed memory(Unit: Kbytes)


S u r e ?


E-26

You can use the following procedure to protect each sampled sound against accidental deletion.

1. Press bp and then use bs (10-key) to enter the tone number of the sampled tone you want to protect.



4. Use the bs (10-key) [4] (o) and [6] (p) keys to display “Protect”.

5. Press the bs (10-key) [+] key to turn on protection.Once protected a tone cannot be deleted.A protected tone is indicated as shown below.

Saving Sample Data on an External DeviceSee page E-62 for details about how to transfer sampled data to a computer for storage.

Maintaining Sampled Sound Data in MemoryAfter you save sampled sound data in memory, it will remain there as long as power is supplied to the keyboard. However, if you disconnect the AC adaptor when there are no batteries loaded, sampled sound data will be deleted.

Tips for Maintaining Data• Use both batteries and the AC adaptor together.• Make sure that batteries with sufficient power are loaded

whenever you disconnect the AC adaptor.• Connect the AC adaptor to the keyboard and plug it into a

power outlet before replacing batteries.

Before connecting or disconnecting the AC adaptor or replacing batteries, first press 1 to turn off power.

Protecting Against Accidental Deletion of Sampled Sounds

P r o t e c t

* 1 : O r g n l

Protected

En

glis

h

E-27

Playing Built-in Songs

With this Digital Keyboard, built-in tune data is referred to as “songs”. You can listen to the built-in songs for your own enjoyment, or you can play along with them for practice.

• In addition to simple listening enjoyment, the built-in songs can be used with the lesson system (page E-31) for practice.

• You can increase the number of tunes using your computer (page E-59).

Use the following procedure to play back built-in songs.

1. Press bm and bn at the same time.This will start playback of the demo songs.• See page E-69 for information about song numbers and

the song sequence.• Demo playback always starts from song number 151.

2. To change to another song while demo playback is in progress, use bs (10-key) [–] and [+] keys to enter the song number you want (page E-6).This will cause demo playback to jump to the song whose number you entered.• You cannot use bs (10-key) number buttons to select a

song.

3. To stop demo playback, press bm.Demo playback continues until you stop it by pressing bm.

bobo

bsbs

8899bkbkblbl bmbm ctctbnbn

brbr

Playing the Demo Songs

D e m o T u n eSong number Tune name

Flashes


E-28

Use the procedure below to play back one of the built-in songs. You can play along on the keyboard with song playback.

1. Press br.

2. Use bs (10-key) to enter the number of the song you want.• See page E-69 for a complete list of available songs.

3. Press bm.This starts playback of the song.

4. Press bm again to stop playback.Song playback will continue (repeat) until you press bm to stop it. You can cancel song repeat by pressing 8 (“REPEAT” indicator disappears from the display).

Use the operations in this section to perform pause, skip forward, and skip back operations.

Pause

1. Press bl.This pauses song playback.

2. Press bl again to resume playback from the point where you paused it.

Skip Forward

1. Press bk.This skips song playback forward to the next measure. Each press of bk skips ahead one measure. Holding down bk skips forward at high speed until you release it.• Pressing bk while song playback is stopped performs

lesson function phrase skip forward (page E-32).

Skip Back

1. Press 9.This skips song playback back to the previous measure. Each press of 9 skips back one measure. Holding down 9 skips back at high speed until you release it.• Pressing 9 while song playback is stopped performs

lesson function phrase skip back (page E-32).

Playing Back a Particular Song

Start/Stop

T w i n k l eTune nameSong number

Key

Note

Tempo

Beat

Measure

Fingering

Sustain pedal

Pause, Skip Forward, Skip Back

Measure number

En

glis

h


E-29

You can use the procedure in this section to repeat particular measures for practice playing along until you master it. You can specify the start measure and the end measure of the section you want to play and practice.

1. Press 8 to temporarily turn off song repeat (“REPEAT” disappears from the display).

2. When song playback reaches the measure you want to specify as the start measure, press 8.This specifies the measure as the start measure.

3. When playback reaches the measure you want to select as the end measure, press 8 again.This specifies the measure as the end measure and starts repeat playback of the measures in the specified range.• During repeat play you can use bl to pause playback, bk to skip forward, or 9 to skip back.

4. Pressing 8 again returns to normal playback.Changing the song number clears the start measure and end measure of the repeat operation.

You can use the following procedure to change the speed (tempo) in order to slow down playback to practice difficult passages, etc.

1. Press bo.Use y (slower) and t (faster) to change the tempo setting. Holding down either button changes the setting at high speed.• Pressing y and t at the same time will return the

current song to its original default tempo.• Pressing bo causes the tempo value to flash on the

display. While the tempo value is flashing, you can use bs (10-key) to change it. The tempo value will stop flashing if you do not perform any operation for a short while.

• Changing the song number will return the song to its original default tempo.

Repeating Playback of Specific Measures

Start End

These measures are repeated.

Flashes

Lights

Changing Playback Speed (Tempo)

Disappears


E-30

Use the following procedure to adjust the balance between the volume of what you play on the keyboard and song playback volume.

1. Press ct and then use the bs (10-key) [4] (o) and [6] (p) keys to display “Song Vol” (page E-6).

2. Use the bs (10-key) [–] and [+] keys to adjust the song volume.

The procedure below lets you select the same keyboard tone as the one being used in the song and play along with your favorite tunes.

1. After selecting a song, hold down br for about two seconds until the displayed tone name changes to the tone name of the song.• If your currently selected tone is the same as the song

tone, the display contents will not change.

2. Play along with song playback.

• If you select a song that uses different tones for left and right hand play, the right hand part tone is assigned to the keyboard.

You can turn off the right hand part or the left hand part of a song during playback and practice playing along with the remaining part.

1. Press bn to select the part you want to turn off.Each press of bn cycles through the settings shown below.

2. Press bm.This starts playback in accordance with the setting you selected in step 1.

• During playback with one part turned off, only the notes of the part that is turned off are shown on the display.

You can transfer song data from your computer to the Digital Keyboard and assign them to song numbers 153 through 162, which are called “user songs”. After that, you can select user songs for playback and for lessons (page E-31). For information about transferring song data from your computer to Digital Keyboard memory, see page E-62.

• For information about how to delete song data loaded from a computer, see page E-57.

Adjusting the Song Volume

Playing with the Tone as Song Playback

S o n g V o l

Turning Off the Part of One Hand for Practice (Part Select)

Increasing the Selection of Songs (User Songs)

Right hand part off

Left hand part off

Both hand parts off

Both hand parts on

En

glis

h

E-31

Using Built-in Songs to Master Keyboard Play

To master a song, it is best to break it up into shorter parts (phrases), master the phrases, and then put everything together. Your Digital Keyboard comes with a Step Up Lesson feature that helps you to do just that.

The built-in songs are pre-divided into phrases to help you master keyboard play.

Step Up Lesson takes you through practice of the right hand part, left hand part, and both hand parts for each phrase of a song. Master all of the phrases and you master the song.

bsbs

8899bkbk bmbm btbtckckclclcmcmcncn ctctbnbn

brbr

Phrases

Song start Song end

Phrase 1 Phrase 2 Phrase 3 . . . .Final

Phrase

Step Up Lesson Flow

Phrase 1• Right Hand Lesson 1, 2, 3• Left Hand Lesson 1, 2, 3• Both Hand Lesson 1, 2, 3

4

Repeat the above to practice phrase 2, 3, 4, and so on, until you reach the final phrase of the song.

4

After mastering all of the phrases, practice the entire song.

4

Now you have mastered the entire song!


E-32

The following are the messages that appear on the display during Step Lessons.

First, select the song, phrase, and part you want to practice.

1. Select the song you want to practice (page E-28).This will select the first phrase of the song.

2. Press cm (or bk) to move forward one phrase, or 9 to move back one phrase.• Holding down bk or 9 scrolls through phrases at high

speed.• The Digital Keyboard remembers the last phrase you

practiced for up to 20 songs. To recall the last practice phrase for the current song (if it is available), hold down cm.

3. Press bn to select the part you want to practice.Each press of bn cycles through the settings shown below.

4. Hold down br for about two seconds.The same tone used for song playback will be assigned to the keyboard (page E-30).

Messages that Appear during Lessons

Message Description

<Phrase> Appears when you select a phrase, when a lesson starts, etc.• Note that certain phrases will cause “Wait”

to appear instead of “Phrase”.

<Wait> Appears when the lesson starts with an intro or fill-in phrase that is not included in the phrases to be practiced. Play toll advance automatically to the next phrase after the un-included phrase plays, so wait until then to start playing on the keyboard.

NextPhrs Appears when advancing automatically to the next phrase. This message appears following a phrase for which “Wait” (see above) is displayed, and during an Auto Step Up Lesson (page E-36).

From top This message appears during Auto Step Up Lesson (page E-36) immediately before practice from Phrase 1 up until the phrase currently being practiced.

Complete Appears at the end of Auto Step Up Lesson (page E-36).

Selecting the Song, Phrase, and Part You Want to Practice

< P h r a s e >Phrase number

First measure of the selected phrase

* This indicator (setting) is skipped if you press bn while a lesson is in progress.

Right hand practice

Left hand practice

Both hand practice

*

En

glis

h


E-33

Now it is time to start the lessons. First, select the song and part you want to practice.

First, listen to the example a few times to familiarize yourself with what it sounds like.

1. Press bt.This starts example play.

2. To stop Lesson 1, press bt or bm.

Play the song on the keyboard. During this lesson, the display shows the key you need to press next. Voice fingering guide also uses a simulate voice to announce which finger you should use. Follow the instructions to press the correct keyboard keys and play the notes. Don’t worry if you play the wrong note. Song playback will wait until you play the correct note. Take your time and play at your own pace.

1. Press ck.This starts Lesson 2.

2. Play notes on the keyboard in accordance with the instructions provided on the display and by voice fingering guide.During this lesson, the display shows the key you need to press next. Voice fingering guide uses a simulate voice to announce which finger you should use.

3. To stop Lesson 2, press ck or bm.

If you complete Lesson 2 play to the end, a score that rates your play appears on the screen.

Lessons 1, 2, and 3

Lesson 1: Listen to the song.

Lesson 2: Watch how the song is played.

Lights

Lights

Lights

Lights

<Lesson 2 Guidance>

Master playing the correct note with the correct finger as instructed by the guidance. Practice playing with the correct timing.

4

Song playback will wait for you to play the correct note.• Keyboard key goes from flashing to lit.• Note guide sounds the correct note to be played.• Voice Fingering Guide tells you what finger to use.

4

Pressing the correct keyboard key causes song playback to resume and the key for the next note flashes.

Bravo! You pass! Advance to the next lesson.

Again! Go back and try again.

Lights

Flashes


E-34

Though song playback stands by waiting for you to press the correct keys as in Lesson 2, the Digital Keyboard does not provide any guidance about what note you need to play next. Remember everything you have learned up to Lesson 2 as you play.

1. Press cl.This starts Lesson 3.

2. Play the song along with the song playback.

3. To stop Lesson 3, press cl or bm.• If you complete Lesson 3 play to the end, a score that

rates your play appears on the screen the same as with Lesson 2.

After you successfully complete all of the phrases in Lessons 1, 2, and 3, it is time to try playing the entire song from beginning to end.

1. Use bn to turn off both hand parts and then press bm.Try playing with both hands and find out how the Digital Keyboard evaluates your effort.

You can turn off phrase repeat for Lessons 1, 2, and 3.

1. Press 8.This disables phrase repeat play.

Use the following procedure to turn off voice fingering guide, which tells you which finger to use to play each note in Lesson 2 and Lesson 3.

1. Press ct and then use the bs (10-key) [4] (o) and [6] (p) keys to display “LESSON” (page E-6).


Lesson 3: Remember what you learned as you play.

<Lesson 3 Guidance>

Press the keyboard keys you learned in Lesson 2.

4

Song playback will wait for you to play the correct note.• Note guide sounds the correct note to be played.

4

If you are still unable to press the correct keyboard key, the Digital Keyboard will display keyboard guidance and voice fingering guide will tell you what finger to use, just as in Lesson 2.

4

Pressing the correct key will cause song playback to resume.

Lights

Lights

Playing a Particular Song All the Way Through

Lesson Settings

Playing without Phrase Repeat

Turning Off Voice Fingering Guide

Disappears

L E S S O N

Flashes

S p e a k

En

glis

h


E-35

3. Press the bs (10-key) [–] key to select the OFF setting.

Use the following procedure to turn off note guide, which sounds the note to be played next in Lesson 2 and Lesson 3.



3. Use the bs (10-key) [4] (o) and [6] (p) keys to display “NoteGuid”.


Use the following procedure to turn off performance evaluation, which evaluates your performance and displays a score in Lesson 2 and Lesson 3.



3. Use the bs (10-key) [4] (o) and [6] (p) keys to display “Scoring”.


You can use the following procedure to change the length of lesson phrases, or to configure the lesson feature so the song is played all the way through, without being divided into phrases.



3. Use the bs (10-key) [4] (o) and [6] (p) keys to display “PhraseLn”.

4. Use the bs (10-key) [–] and [+] keys to select the phrase length you want.

The following options are available for songs loaded from external sources only.

Turning Off Note Guide

Turning Off Performance Evaluation

Indicator disappearswhen voice fingering

guide is turned off.

N o t e G u i d

S c o r i n g

Indicator disappearswhen performance

evaluation is turned off.

Changing the Phrase Length

Off (oFF) The phrase length is from the beginning to the end of the song.

Preset (PrE) Phrase lengths are as specified in the song.

Short (Ln1) Length of one phrase is one measure.

Middle (Ln2) Length of one phrase is two measures.

Long (Ln3) Length of one phrase is four measures.

P h r a s e L n


E-36

With Auto Step Up Lesson, the Digital Keyboard advances through each lesson automatically.

1. Select the song and part you want to practice (page E-28).

2. Press cn.Listen to the first phrase in Lesson 1.• In Lesson 1, the sample phrase is played only once

before advancing to Lesson 2.

3. Auto Step Up Lesson stops automatically after you are able to get through all of the lessons successfully.• In Lesson 2 and Lesson 3, the Digital Keyboard

advances to the next lesson if you are able to achieve the “Bravo!” evaluation result.

• To cancel a lesson, press cn or bm.

• You can change the step and phrase during Auto Step Up Lesson using 9, bk, and bt to cm.

• Starting Auto Step Up Lesson turns on Phrase Repeat (page E-34), Note Guide (page E-35) and Performance Evaluation (page E-35) automatically. These features cannot be turned off during lessons.

Auto Step Up Lesson Procedure

* Auto Step Up Lesson advances to the next phrase, regardless of whether the “Bravo!” result is attained.

Using Auto Step Up Lesson

Lights

Flashes

Phrase 1Lesson 1

4Lesson 2

4Lesson 3

4Phrase 2Lesson 1

4Lesson 2

4Lesson 3

4

Phrase 1, 2• Lesson 3*

4Phrase 3Lesson 1

4Lesson 2

4Lesson 3

4

Phrase 1, 2, 3• Lesson 3*

4Next phrase practice using the same procedure

4Final phraseLesson 1

4Lesson 2

4Lesson 3

4

From Phrase 1 to the final phrase• Lesson 3*

4Lesson complete

En

glis

h

E-37

Music Challenge Keyboard Game

Music Challenge is a game that measures your reaction speed as you press keys in response to on-screen keyboard indicators and fingering guide indications.

1. Press br.

2. Press co.This causes a key on the on-screen keyboard to start to flash, and starts the Music Challenge song.

3. After the on-screen keyboard indicator changes from flashing to lit, press the indicated key with the indicated finger as quickly as possible.This causes the on-screen keyboard key to go out to let you know that you cleared the first note. The next on-screen keyboard key starts to flash, so get ready to press the next key.• The time it takes you to press the keyboard key after

the on-screen key lights appears on the display (Unit: 0.1 sec). The shorter the time, the higher your score.

• Pressing a keyboard key before the on-screen key goes from flashing to lit, will not advance to the next note.

4. The game ends when you advance successfully through 20 notes.• Your playing time appears on the display. After a short

while, the playing time display changes to a score. To clear the score from the display, press bp, bq, or br.

• You can cancel a game at any time by pressing co or bm.

• Notes and fingering guide fingers are indicated randomly.• The tempo of the game songs cannot be changed.• All buttons except 1, bm, and co are disabled while a game

is in progress.

11 bpbp

bmbm coco

brbrbqbq

M . C H A L . !

Displayed during a game.

Number of remaining notes

Fingering

M . C H A L . !Time 0.3sec

T i m e 1 9 . 2

S c o r e 8 0

Playing time

Score

E-38

Using Auto Accompaniment

With Auto Accompaniment, simply select an accompaniment pattern. Each time you play a chord with your left hand the appropriate accompaniment will play automatically. It’s like having a personal backup group along with you wherever you go.

• Auto Accompaniments are made up of the following three parts.(1) Rhythm(2) Bass(3) Harmony

You can have only the rhythm part play, or you can have all three parts play at the same time.

The rhythm part is the foundation each Auto Accompaniment. Your Digital Keyboard comes with a variety of built-in rhythms, including 8-beat and waltz. Use the following procedure to play the basic rhythm part.

1. Press bq.

2. Use bs (10-key) to select the rhythm number you want.• See the separate “Appendix” for information about

individual rhythms.

3. Press bm or 9.This starts the rhythm.

4. Play along with the rhythm.

5. To stop the rhythm, press bm again.

bobo

bsbs

8899bkbkblbl bmbm crcr ctctbnbn

bqbq

Playing the Rhythm Part Only

Starting and Stopping the Rhythm Part Only

F u n k 8 B tRhythm number Rhythm pattern name

This pattern changes with each beat.

En

glis

h


E-39

Playing a chord with your left hand automatically adds bass and harmony accompaniment parts to the currently selected rhythm. It is just like having your own personal back up group on call.

1. Start play of the Auto Accompaniment rhythm part.

2. Press bn.This enables chord input on the accompaniment keyboard.

3. Use the accompaniment keyboard to play chords.This will cause bass and harmony Auto Accompaniment parts to be added to the rhythm part.

4. Play other chords with left hand as you play the melody with your right hand.

5. Pressing bn again returns to rhythm only accompaniment.

• For information about starting Auto Accompaniment as soon as a chord is played, see “Using Synchro Start” on page E-42.

• You can use the split point to change the size of the accompaniment keyboard range (page E-16).

You can select from among the following five chord input modes.• FINGERED 1• FINGERED 2• FINGERED 3• CASIO CHORD• FULL RANGE CHORD

1. Hold down bn until the chord input mode selection screen appears on the display.

2. Use the bs (10-key) [–] and [+] keys to select the chord input mode you want.• If you do not perform any operation after the chord input

mode selection screen appears, the display will return automatically to the screen that was displayed before you held down bn.

Playing All Parts

Auto Accompaniment with Chords

Example : Pressing D-F#-A-C on the accompaniment keyboard4

Accompaniment for the D-F#-A-C chord (D7) sounds.

Lights

Accompaniment keyboard

Chords (no melody played) Melody

F3

Selecting a Chord Input Mode

C h o r d Chord input mode


E-40

FINGERED 1, 2, and 3With these three input modes, you play chords on the accompaniment keyboard using their normal chord fingerings. Some chord forms are abbreviated, and can be fingered with one or two keys.See the separate “Appendix” for information about chords that are supported and how they are fingered on the keyboard.

FINGERED 1Play the component notes of the chord on the keyboard.

FINGERED 2Unlike FINGERED 1, 6th input is not possible. m7 or m7b5 is input.

FINGERED 3Unlike FINGERED 1, allows input of fraction chords with the lowest keyboard note as the bass note.

CASIO CHORDWith CASIO CHORD, you can use simplified fingerings to play the four types of chords described below.

CASIO CHORD Fingering

• When playing a minor, seventh, or minor seventh chord, it makes no different whether the additional keys you press are black or white.

FULL RANGE CHORDWith this mode, you can use the full range of the keyboard to play chords and the melody.See the separate “Appendix” for information about chords that are supported.



Chord Type Example

Major ChordsLetters above the accompaniment keyboard indicate the chord assigned to each key. Pressing a single accompaniment area key in the CASIO CHORD mode will play the major chord whose name is marked above the key. All of the accompaniment area keys that are marked with the same chord name play exactly the same chord.

C (C Major)

Minor ChordsTo play a minor chord, press the accompaniment area key that corresponds to the major chord, while also pressing one other accompaniment area key to the right.

Cm (C Minor)

Seventh ChordsTo play a seventh chord, press the accompaniment area key that corresponds to the major chord, while also pressing two other accompaniment area keys to the right.

C7 (C Seventh)

Minor Seventh ChordsTo play a minor seventh chord, press the accompaniment area key that corresponds to the major chord, while also pressing three other accompaniment area keys to the right.

Cm7 (C Minor Seventh)

AC C DE F F# b E #G bA BBb C C DE FE# b




Accompaniment keyboard / Melody keyboard

En

glis

h


E-41

Use the following procedures to play intro and ending patterns, to play fill-in patterns, and to play variations of basic Auto Accompaniment patterns.

Auto Accompaniment VariationEach Auto Accompaniment pattern has a basic “normal pattern” as well as a “variation pattern”.

1. Press bk.This starts the variation pattern.

2. Pressing 9 returns to normal pattern.

Auto Accompaniment IntroUse the following procedure to play an intro of a few measures.

1. Press 8.This starts the intro pattern. Normal pattern play will start when the intro pattern is finished.• If you press bk while an intro pattern is being played,

the variation pattern will start when the intro pattern is finished.

Auto Accompaniment Fill-inUse the procedure below to play a fill-in pattern during a performance.• A “fill-in” is a short phrase played where you want to change

the mood of a piece. A fill-in pattern can be used to create a link between two melodies or an accent.

• Normal and variation patterns have their own unique fill-in patterns.

Normal Pattern Fill-in

1. While a normal pattern is playing, press 9.This plays the fill-in for the normal pattern.• Normal pattern play will resume after the fill in pattern is

complete.

Variation Pattern Fill-in

1. While a variation pattern is playing, press bk.This plays the fill-in for the variation pattern.• Variation pattern play will resume after the fill in pattern

is complete.

Auto Accompaniment EndingUse the following procedure to play an ending of a few measures.

1. While an Auto Accompaniment is playing, press bl.This will play the ending pattern and then stop Auto Accompaniment play automatically.

Using Auto Accompaniment Effectively

Auto Accompaniment Pattern Variations

Lights

Lights

Lights

Lights

Lights

Lights


E-42

Using Synchro StartUse the following procedure to configure the Digital Keyboard to start Auto Accompaniment play as soon as you press a keyboard key.

1. Press bl.This enters accompaniment start standby.

2. Play a chord on the keyboard.This will start full part accompaniment (normal).

Any of the following operations can be performed while in synchro standby to start a non-normal pattern.• To start with intro pattern, press 8.• To start with variation pattern play, press bk.

Use the following procedure to change Auto Accompaniment speed to a level that suits you.

1. Press bo.Use y (slower) and t (faster) to change the tempo setting. Holding down either button changes the setting at high speed.• Pressing y and t at the same time will initialize the

tempo setting in accordance with the currently selected rhythm.

• While the tempo value is flashing, you also can use bs (10-key) to change it.

• If you do not perform any operation for a few seconds after the tempo setting screen appears, the display will return to the screen displayed before you pressed bo.

Use the following procedure to adjust the balance between what you are playing on the keyboard and the volume of the Auto Accompaniment.

1. Press ct and then use the bs (10-key) [4] (o) and [6] (p) keys to display “AcompVol” (page E-6).

2. Use the bs (10-key) [–] and [+] keys to adjust the accompaniment volume.

With One-Touch Preset, the Digital Keyboard automatically configures optimal tone, tempo, and other settings in accordance with the rhythm pattern you select.

1. Hold down bq until the current tone screen appears on the display.This will automatically apply the One-Touch Preset settings in accordance with the rhythm pattern that is currently selected.

2. Play a chord on the keyboard.This will start accompaniment automatically.

Changing Auto Accompaniment Speed (Tempo)

Flashes

Flashes

Adjusting the Accompaniment Volume

Using One-Touch Preset

A c o m p V o l

En

glis

h


E-43

Auto Harmonize automatically adds harmony to notes you play with your right hand, which adds rich depth to the melody of your performances. You can select from among 12 types of Auto Harmonize to suit the type of music you are playing.

• Auto Harmonize is controlled using the same button cr as the Arpeggiator (page E-56). Because of this, these two functions cannot be used at the same time.

1. Press bn to enable Auto Accompaniment with chords (ACCOMP indicator lit) (page E-39).• Auto Harmonize cannot be used while FULL RANGE

CHORD is selected as the chord input mode. Select another mode if you want to use Auto Harmonize.

2. Hold down cr until the Auto Harmonize or Arpeggiator type number and type name appear on the display.• If you do not perform any operation for a few seconds,

the display will return to previous screen automatically.

3. Use the bs (10-key) [–] and [+] keys to select the Auto Harmonize type you want.• 013 through 102 are Arpeggiator types (page E-56). Do

not select them when using the Auto Harmonize.

4. Press cr to turn on Auto Harmonize.If you play chords with your left hand and the melody with your right hand, harmony notes will be added to the melody.• Press cr again to turn off Auto Harmonize.

Using Auto Harmonize

D u e t 1Type number Type name

D u e t 2

Type number

Type Name Description

001 Duet 1Adds close (separated by 2 to 4 degrees) 1-note harmony below the melody note.

002 Duet 2Adds open (separated by more than 4 to 6 degrees) 1-note harmony below the melody note.

003 Country Adds country style harmony.

004 OctaveAdds the note from the next lower octave.

005 5th Adds the fifth degree note.

006 3-Way OpenAdds 2-note open harmony, for a total of three notes.

007 3-Way CloseAdds 2-note close harmony, for a total of three notes.

008 StringsAdds harmony that is optimal for strings.

009 4-Way OpenAdds 3-note open harmony, for a total of four notes.

010 4-Way CloseAdds 3-note close harmony, for a total of four notes.

011 Block Adds block chord notes.

012 Big Band Adds big band style harmony.

S t G r P n o

Lit when on

E-44

Editing Auto Accompaniment Patterns

You can use the procedure in this section to edit the Digital Keyboard’s built-in Auto Accompaniment rhythm patterns and create your own “user rhythms”.• You can store up to 10 user rhythms in Digital Keyboard

memory, using rhythm numbers 181 through 190.

Editable Accompaniment Patterns and Instrument Parts

Any of the following parts that make up each rhythm that is assigned a rhythm number can be edited.Accompaniment patterns (intro, fill-in, etc.): 6 typesInstrument parts (drum, bass, etc): 8 types

Editable Contents• Rhythm number• Part on/off• Tone number• Volume level• Left-right speaker balance (panning)• Reverb depth (reverb send)• Chorus depth (chorus send)

1. Select the number of the rhythm you want to edit.

2. Press 6.

If the “Err Mem Full” message appears on the display, see page E-68 for information about what you should do.

11 bsbs

8899bkbkblbl bmbm ctctbnbn

66 bqbq

Accompaniment Pattern

Instrument Parts

INT

RO

NO

RM

AL

NO

RM

AL

FIL

L-IN

VA

RIA

TIO

N

VA

RIA

TIO

NF

ILL

-IN

EN

DIN

G Bu

ttonI N NF V VF E

1 Drum I-1 N-1 NF-1 V-1 VF-1 E-1

2 Percussion I-2 N-2 NF-2 V-2 VF-2 E-2

3 Bass I-3 N-3 NF-3 V-3 VF-3 E-3

4 Chord 1 I-4 N-4 NF-4 V-4 VF-4 E-4

5 Chord 2 I-5 N-5 NF-5 V-5 VF-5 E-5

6 Chord 3 I-6 N-6 NF-6 V-6 VF-6 E-6

7 Chord 4 I-7 N-7 NF-7 V-7 VF-7 E-7

8 Chord 5 I-8 N-8 NF-8 V-8 VF-8 E-8

Button 8 9 9 bk bk bl

bn

To edit and save an Auto Accompaniment

D r m : R h y .

Instrument part

Editable contentRhythm number

Lights Accompaniment Pattern (Flashes)

En

glis

h


E-45

3. Press a button from 8 to bl to select the Accompaniment Pattern you want to edit.The name of the pattern will appear on the display.

Pattern selected by each button

4. Press bn to select the instrument part you want to edit.The part number of the part you select will flash on the display.

5. Press bq.This will display the rhythm number.

6. Use the bs (10-key) [–] and [+] keys to select the rhythm number you want to assign to the instrument part you are editing.A different rhythm number is assigned for each instrument part.• You can play the data of the currently selected rhythm

number by pressing bm.• All of the eight instrument parts of an intro (I-1 to 8)

must have the same rhythm number. If you assign rhythm 003 to I-1, for example, 003 also will be assigned automatically to parts I-2 through I-8. If you then assign rhythm 004 to part I-2, for example, I-1 and all of the other parts also will change to 004. All of the eight parts of an ending (E-1 to E-8) also must have the same rhythm number.

7. To edit the other contents, press ct to display the screen for the setting you want.• Each press of ct will cycle through the settings shown

below, from 1 through 6.• Use the bs (10-key) [–] and [+] keys to change the

currently selected setting.• You can play the current settings of the editable part by

pressing bm.

* Instrument parts 1 and 2 can be assigned drum set tones (554 through 570) only.

8. Repeat steps 4 through 7 as many times as necessary to edit the parts you want for the pattern you selected in step 3.• If you change the rhythm number in step 6, the editable

contents (1 through 6 in the above table) you last configured in step 7 of this procedure will be overwritten with the settings of the newly selected rhythm.

9. Repeat steps 3 through 8 as many times as necessary to edit the accompaniment patterns you want (intro through ending).

10. Press 6.This will display a message asking if you want to save the user rhythm.

11-1. Press the bs (10-key) [–] key to exit without saving.

This displays the delete confirmation message.Press the bs (10-key) [+] key to exit the editing procedure.

8: Intro9: Normal, Normal Fill-in

(Each press toggles the selection.)bk: Variation, Variation Fill-in

(Each press toggles the selection.)bl: Ending

D r m : R h y .bk Variation selected

Part 6 (Chord 3)

Parts that contain data. Flashing: Part selected for editing.

Setting Type Display Settings

1 Part on/off Part On/Off

2 Tone number* Tone 001 - 553

3 Volume level Vol. 000 - 127

4Left-right speaker balance (panning)

Pan –64 - 0 - +63

5Reverb depth (reverb send)

Rvb 000 - 127

6Chorus depth (chorus send)

Cho. 000 - 127


E-46

11-2. Press the bs (10-key) [+] key to save the data.

• Use bs (10-key) [–] and [+] keys to select the rhythm number you want to save.

• You can edit the user rhythm name. Use the bs (10-key) [4] (o) and [6] (p) keys to move the cursor to the character you want to change, and then use [+] and [–] to change the character.

12. Press bs (10-key) [7] (ENTER) key.This will display a message asking if you want to save the user rhythm.• Press the bs (10-key) [+] key to save the data.• Press the bs (10-key) [–] key to return to the screen

that was displayed before you pressed [7] (ENTER) key.

• If you select a user rhythm number that already contains data, the existing data will be replaced by the new data.

• You cannot change the tone assigned to the keyboard while an Auto Accompaniment editing (rhythm edit) operation is in progress.

Saving User Rhythm Data on an External DeviceSee page E-62 for details about how to transfer edited accompaniment data to a computer for storage.

Maintaining User Rhythm Data in MemoryAfter you save user rhythm data in memory, it will remain there as long as power is supplied to the keyboard. However, if you disconnect the AC adaptor when there are no batteries loaded, user rhythm data will be deleted.





F u n k 8 B t

En

glis

h


E-47

The following procedure cannot be performed while an Auto Accompaniment editing (rhythm edit) operation is in progress.



3. Press the bs (10-key) [6] (p) key.

4. Use the bs (10-key) [–] and [+] keys to select the user rhythm you want to delete.


6. Press the bs (10-key) [+] (YES) key.After the delete procedure is complete, “Complete” will appear followed by the screen in step 2 of the above procedure.• To cancel the delete operation, press [–] (NO) or [9]

(EXIT) in place of [+] (YES).

To delete saved data

Used memory (Unit: Kbytes)


D E L E T E

Flashes

U s e 1 User rhythm name

S u r e ?

E-48

Saving Keyboard Setups to Registration Memory

Registration memory lets you store Digital Keyboard setups (tone, rhythm, etc.) for instant recall whenever you need them. Registration memory simplifies performance of complex pieces that require successive tone and rhythm changes.

You can have up to 32 setups in Registration memory at one time. bt and ck to cn are used for recording.

• Each press of bank select button bt cycles through the bank numbers, from 1 to 8.

• Pressing a button from ck to cn selects the corresponding area in the currently selected bank.

Registration Save ExampleThis example saves the data shown in the table below to the following setups in Bank 1.• Initial melody setup saved to Setup 1-1.• Second melody setup saved to Setup 1-2.• Third melody setup saved to Setup 1-3.

Registration Memory DataThe following is the complete list of data that is saved to a registration memory setup.

• Tone numbers (main, layer, split)• Rhythm number• Tempo• Auto Harmonize• Transpose• Split point• Touch Response• Octave shift• Chord fingerings• Accompaniment volume• Arpeggiator setting (on, off, type)• Synchro start• Reverb (on, off, type)• Chorus (on, off, type)• Accomp (on, off)• Arpeggiator hold (on, off)• Layer (on, off)• Split (on, off)• Pedal effect

11 bsbs

btbtckckclclcmcmcncncoco

bqbq

ctctcscs

Area 1 Area 2 Area 3 Area 4

Bank 1 Setup 1-1 Setup 1-2 Setup 1-3 Setup 1-4


.

...

.

...

.

.


bt ck cl cm cn

Setup 1–1 Setup 1–2 Setup 1–3

Tone Number 001 062 001

Rhythm Number 118 005 089

Tempo 080 140 089

En

glis

h

Saving Keyboard Setups to Registration Memory

E-49

1. Press bq.

2. Press cs and ct at the same time to enable registration.• Pressing cs and ct at the same time again will disable

registration.

3. Configure the tone, rhythm, and other settings you can to include in the setup.

4. Press bt to select the bank you want.Each press of bt cycles through the bank numbers.

• You also can select a bank by holding down bt as you use the bs (10-key) number buttons to enter a bank number.

5. While holding down co, press a button from ck to cn to select an area.This will save the settings you configured in step 3 into the applicable setup.• If there is anything already stored in the setup, it will be

replaced (deleted) by the new setup.

1. Press bt to select the bank that contains the setup you want to recall.

2. Use buttons ck to cn to select the area whose setup you want to recall.This will recall the registration memory setup and automatically configure the Digital Keyboard settings accordingly.

• Notes currently being sounded by the keyboard may stop if you recall a setup that causes a change in octave shift (page E-18). To keep this from happening, either select a setup that does not cause a change in the octave shift setting, or hold down the pedal (which will cause notes currently being played to be sustained).

Saving registration Data on an External DeviceSee page E-62 for details about how to transfer registration data to a computer for storage.

Maintaining Data in Registration MemoryAfter you save data in registration memory, it will remain there as long as power is supplied to the keyboard. However, if you disconnect the AC adaptor when there are no batteries loaded, data in registration memory will be deleted.





To save a setup to registration memory

Lit when on

Bank number

Bank 4

S t o r e Stored in Setup 4-1

To recall a setup from registration memory

Bank 6

R e c a l l Setup 6-1 recalled

E-50

Recording Your Keyboard Play

The recorder feature lets you record your keyboard play.

Use the following procedure to record everything you play on the keyboard.

1. Press bq.

2. Press 5.

3. Press 5 again.This will enter record stnadby.

4. Configure the tone, rhythm, and other settings you want to use.

5. Start playing.Recording starts as soon as you play something on the keyboard.

• You can use Auto Accompaniment while playing. If you do, Auto Accompaniment also will be recorded.

6. To stop recording, press bm.

7. To play back what you have recorded, press bm again.Each press of bm starts and stops playback.

11 bsbsbpbp

bmbm btbtckckclclcmcmcncncocobnbn

55 brbrbqbq

Recording and Playing Back Keyboard Play

Lights

Flashes

Flashes

Lights

Lights

En

glis

h


E-51

8. Press 5 twice to exit the recorder mode.

• The flashing on the screen shown in step 3 becomes faster when remaining recorder memory capacity becomes less than 100 notes.

• Total recorder memory capacity is approximately 12,000 notes. Recording will stop automatically when there is no more unused recorder memory remaining.

• Each press of 5 cycles through the settings shown below. You can listen to the recorded data as many times as you like by pressing bm while in playback standby.

To delete recorded dataAfter step 3 of the above procedure, hold down 5 (without pressing any keyboard key) until the message “Tr.Del?” appears on the display. Press [+] (YES) to delete the data, or [–] (NO) to cancel the delete operation.

• Turning off the Digital Keyboard while recording is in progress will cause any data in recorder memory to be deleted.

• A new recording replaces (deletes) previously recorded contents.

Maintaining Data in Recorder MemoryAfter you save data in recorder memory, it will remain there as long as power is supplied to the keyboard. However, if you disconnect the AC adaptor when there are no batteries loaded, data in recorder memory will be deleted.





You can divide a song according to various types of parts (instrument, left and right hand, etc.), and record each part to a specific track. You can mix up to six tracks (the original track plus five additional tracks) into a final song.

About tracksTracks are numbered from 1 to 6.• If you do not specify a track number when recording,

recording is performed to Track 1 automatically.

In addition to what you play on the keyboard, the following information also is recorded.• Track 1

Settings:Tone number, rhythm number, tempo, reverb, chorus, chords, layer/split settings, Auto Harmonize/Arpeggiator setting

Operations:Pedal, INTRO button, SYNCHRO/ENDING button, NORMAL/FILL-IN button, VARIATION/FILL-IN button

• Tracks 2 through 6Tone number, pedal operation

Disappears

Recorder OffPlayback Standby

Record Standby

Disappears Lights Flashes

Using Tracks to Record and Mix Parts


E-52

1. Record the first part to Track 1.To record to Track 1, perform steps 1 through 6 under “Recording and Playing Back Keyboard Play” (page E-50).

2. Press 5.This will enter record standby.

3. Press a button from ck to co to select the track number of the next track to which you want to record.This will enter record standby for the track you selected.Example: Track 2

• If you want to use a different tone than the one you used in Track 1, press bp and then use bs (10-key) to input the tone number.

4. Press bm.This will start playback of what you recorded up to this point in other tracks and record what you play on the keyboard to the currently selected track. Play the notes you want on the keyboard.

5. To stop recording, press bm.• To play back what you have recorded, press bm again.

Each press of bm starts and stops playback.

6. Repeat steps 2 through 5 to record the other tracks.

7. After you finish recording all of the tracks, press bm.• This will start playback of the recorded tracks. Press bm

to stop or restart playback.• At this time you can turn off playback of specific tracks

using buttons bt to co. Pressing a key toggles playback of each track on (track number displayed) or off (track number not displayed).

• If you want to re-record a track, press 5. This will return to step 2 of the above procedure. Only the tracks that are turned on (displayed) above will play as you re-record.

Example: Tracks 2 and 3 selected


To delete a recorded trackAfter step 3 of the above procedure, hold down 5 (without pressing any keyboard key) until the message “Tr.Del?” appears on the display. Press [+] (YES) to delete the track, or [–] (NO) to cancel the delete operation.

To record to Tracks 1 through 6

Lights

Lights

Flashes

Flashes

Flashes

Flashes

Disappears

Disappears

En

glis

h


E-53

You can record up to five songs (numbered 1 through 5) in memory. After that, you can select a specific song for playback.

1. Press bq.

2. Press 5.A song number will appear in the upper left corner of the display for a few seconds. While it is, use bs (10-key) to specify the number of the song you want to record or play back. The song number will disappear if you do not perform any operation.Example: Song 2

3. Press 5 to record, or bm to play back.To stop recording or playback, press bm.


To delete recorded dataAfter step 2 of the above procedure, hold down 5 (without pressing any keyboard key) until the message “Song Del?” appears on the display. Press [+] (YES) to delete the song, or [–] (NO) to cancel the delete operation.

This section explains how to play along and record along with one of the Digital Keyboard’s built-in songs.

The following operations and settings also are recorded along with your keyboard play.

Tone number, song number, pedal operation, tempo, reverb, chorus, layer/split settings

• There can be only one recording of keyboard play with a built-in song in recorder memory. Making a new recording replaces (deletes) previously recorded data.

1. Press br.

2. Press 5.This will enter playback standby.

3. Press 5 again.This will enter record standby.

4. Use bs (10-key) to enter the song number you want to assign to the recording.

Recording Two or More Songs, and Selecting One for Playback

P l a y N o .

Recording while Playing Along with a Built-in Song

Lights

Flashes

Flashes


E-54

5. Press bn to cycle through the parts in the sequence shown below.

Example: Left-hand part recording

• Configure tone and tempo settings at this time as well.

6. Press bm to start built-in song playback and recorder recording.Play along with the playback.• To stop recording part way through, press bm.

7. Recording will stop automatically when the end of the built-in song is reached.This will enter playback standby.

8. Press bm.This will start playback of what you recorded.• Each press of bm starts and stops playback.


To delete recorded dataAfter step 2 of the above procedure, hold down 5 until the message “Song Del?” appears on the display. Press [+] (YES) to delete the song.

See page E-62 for details about how to transfer recorded data to a computer for storage.Right-hand Recording

Both-hand Recording

Left-hand Recording

Flashes

Lights

Disappears

Saving Recorded Data on an External Device

En

glis

h

E-55

Other Useful Digital Keyboard Functions

You can use the procedure in this section to change the scale (tuning system) of the keyboard from the standard equal temperament to another scale that is more suitable for playing Indian music, Arabic music, ancient classics, etc.You can select from among the 17 preset scales listed below.

1. Press bq.

2. Press 4.

3. Use the bs (10-key) [–] and [+] keys to select the preset scale you want. After selecting a scale, press the key on the keyboard that you want to use as the root key (C to B).

4. After you are finished, press 4 to assign the scale to the keyboard.

You can use the following procedure to reflect the scale you adjusted using the scale fine tune or the quarter tone function, or the preset scale you selected with the preset function in Auto Accompaniments.



3. Use the bs (10-key) [4] (o) and [6] (p) keys to display “AcompScl”.

4. Use the bs (10-key) [+] key to select on.

bsbsbpbp44

crcr ctct

bqbq

Changing the Scale of the Keyboard

No. Scale name Display

00 Equal Temperament Equal

01 Pure Major PureMajr

02 Pure Minor PureMinr

03 Pythagorean Pythagor

04 Kirnberger 3 Kirnbrg3

05 Werckmeister Wercmeis

06 Mean-Tone MeanTone

07 Rast Rast

08 Bayati Bayati

09 Hijaz Hijaz

10 Saba Saba

11 Dashti Dashti

12 Chahargah Chaharga

13 Segah Segah

14 Gurjari Todi GujrTodi

15 Chandrakauns Cndrkuns

16 Charukeshi Carukesi

Using the Current Scale Notes for Auto Accompaniments

E q u a lScale nameScale number

O T H E R

Flashes


E-56

Selecting a Music Preset instantly changes the Digital Keyboard to a preset setup (tone, rhythm, tempo, etc.) for play of songs of various genres/categories. The press of a button sets up the Digital Keyboard so those songs sound exactly the way you thought they should.• See the separate “Appendix” for a complete list of the 305

Music Presets that are available.

1. Hold down bp until the indicator shown below appears on the display.

2. Use bs (10-key) to select the preset number you want.This will change the setup (tone, rhythm, etc.) of the Digital Keyboard.• At this time the Digital Keyboard will go into Auto

Accompaniment synchro start standby (page E-42).• Pressing bp, bq, or br will return to the screen that was

displayed before you held down in step 1, above.

3. Play along on the keyboard with the accompaniment.

The Arpeggiator makes it possible to play an arpeggio pattern automatically. There are 90 different arpeggio patterns from which to choose in order to match the music you are playing.

• The Arpeggiator is controlled using the same button cr as Auto Harmonize (page E-43). Because of this, these two functions cannot be used at the same time.

1. Hold down cr until the Auto Harmonize or Arpeggiator type number and type name appear on the display.• If you do not perform any operation for a few seconds,

the display will return to the previous screen automatically.

2. Use the bs (10-key) [–] and [+] keys to select the Arpeggiator type you want.• 001 through 012 are Auto Harmonize types (page

E-43). Do not select them when using the Arpeggiator.

Using Music Preset

I L o v e H e rPreset number Preset name

Lights

Using the Arpeggiator

Type number

Type Name Description

013 - 030 Up Rising

031 - 048 Down Falling

049 - 066 U/D ARepeat pattern alternating between rising and falling (Type A)

067 - 084 U/D BRepeat pattern alternating between rising and falling (Type B)

085 - 102 RandomRandom arrangement of notes of the pressed keys

D u e t 1Type number Type name

1 U p 1Speed (The number of arpeggio notes per beat)

Octave1 .. Uses the actual notes played.2 .. Uses the actual notes played plus the same notes one octave.4 .. Uses the actual notes played plus the same notes three octaves.

En

glis

h


E-57

3. Press cr to turn on Arpeggiator.Playing a chord on the keyboard will start arpeggio play.• Press cr again to turn off Arpeggiator.

• The tempo setting of the Arpeggiator is the same as that set for the metronome (page E-12).

Use the following procedure when you want an arpeggio pattern to keep playing after you release the keyboard keys.



3. Press the bs (10-key) [+] key to select the ON setting.

You can use the following procedure to delete user song data stored as song numbers 153 through 162.



3. Press the bs (10-key) [6] (p) button twice.

4. Use the bs (10-key) [–] and [+] keys to select the user song you want to delete.




Sustaining an Arpeggio (Arpeggiator Hold)

S t . G r P n o

Lit when on

A r p e g H l d

Deleting User Song Data



D E L E T EFlashes

U S E R S O N GUser song name

S u r e ?


E-58

Use the following procedure when you want to delete sampled sounds, user songs and all other data, except for recorded songs, currently in Digital Keyboard memory.

• Performing this procedure also will delete protected sampled sound data (page E-26). It is recommended that you save important data to your computer’s hard disk (page E-59).

• This operation does not delete recorded song data.



3. Use the bs (10-key) [4] (o) and [6] (p) keys to display “All Data”.




Deleting All Data in Digital Keyboard Memory



D E L E T E

Flashes

A l l D a t a

Flashes

S u r e ?

En

glis

h

E-59

Connecting External Devices

You can connect the Digital Keyboard to a computer and exchange MIDI data between them. You can send play data from the Digital Keyboard to music software running on your computer, or you can send MIDI data from your computer to the Digital Keyboard for playback.

The following shows the minimum computer system requirements for sending and receiving MIDI data. Check to make sure that your computer complies with these requirements before connecting the Digital Keyboard to it.

• Operating SystemWindows® XP (SP2 or later)*1

Windows Vista® *2

Mac OS® X (10.3.9, 10.4.11 or later, 10.5.2 or later)

• USB port

• Never connect to a computer that does not conform to the above requirements. Doing so can cause problems with your computer.

• Make sure you follow the steps of the procedure below exactly. Connecting incorrectly can make data send and receive impossible.

1. Turn off the Digital Keyboard and then start up your computer.• Do not start up the music software on your computer

yet!

2. After starting up your computer, use a commercially available USB cable to connect it to the Digital Keyboard.

3. Turn on the Digital Keyboard.• If this is the first time you are connecting the Digital

Keyboard to your computer, the driver software required to send and receive data will be installed on your computer automatically.

4. Start up your computer’s music software.

11 bsbs

ctctbnbn

Connecting a Computer

Minimum Computer System Requirements

*1: Windows XP Home EditionWindows XP Professional (32- bit)

*2: Windows Vista (32- bit)

Connecting the Digital Keyboard to Your Computer

Computer USB port

A connector

Digital Keyboard USB port

B connector

USB cable(A-B type)


E-60

5. Configure the music software settings to select one of the following as the MIDI device.

• For information about how to select the MIDI device, see the user documentation that comes with the music software you are using.

• Be sure to turn on the Digital Keyboard first before starting up your computer’s music software.

• Once you are able to connect successfully, there is no problem with leaving the USB cable connected when you turn off your computer and/or Digital Keyboard.

• This Digital Keyboard conforms to General MIDI Level 1 (GM).

• For detailed specifications and connections that apply to MIDI data send and receive by this Digital Keyboard, see the latest support information provided by the website at the following URL.http://world.casio.com/

A keyboard channel is the channel used for sending Digital Keyboard data to a computer. You can select the channel you want for sending Digital Keyboard data to a computer.• The keyboard channel setting range is 01 to 16.

1. Press ct and then use the bs (10-key) [4] (o) and [6] (p) keys to display “MIDI” (page E-6).


3. Use the bs (10-key) [–] and [+] keys to change the keyboard channel.

The navigate channels can be used to display only the notes of a particular channel (part) as on-screen guide information from among the note information of a tune sent from the computer.

Specifying the Navigate ChannelsFrom among the 16 available channels (numbered 01 to 16), you can specify any two neighboring channels (such as 05 and 06) as navigate channels. The smaller numbered channel is the navigate (L) channel, while the larger numbered channel is the navigate (R) channel. Specifying the navigate (R) channel will automatically configure the navigate (L) channel as well.



3. Use the bs (10-key) [4] (o) and [6] (p) keys to display “Navi. Ch”.

4. Use the bs (10-key) to specify the navigate (R) channel.This also will automatically configure the next lower channel number as the navigate (L) channel.

CASIO USB-MIDI : (For Windows Vista, Mac OS X)USB Audio Device : (For Windows XP)

MIDI Settings

Keyboard Channel

M I D I

Flashes

K e y b d C h

Navigate Channels

N a v i . C h

En

glis

h


E-61

Turning Off the Navigate Channel Sound and Playing the Part on the Keyboard

You can turn off the sound on one or both of the navigate channels and play the cancelled part on the keyboard yourself.

1. Press bn to select the channel setting you want to turn off.Each press of bn cycles through settings (1) thorough (4) described below.• If you turn off one channel, you can play the cancelled

part on the keyboard using the same tone as the channel you turned off. If you turn off both channels (option (3)), what you play on the keyboard sounds using the tone of the navigate (R) channel.

There are times when exchanging data with a computer when you may not want the Digital Keyboard to sound notes you play on its keyboard. The local control setting lets you do just that.



3. Use the bs (10-key) [4] (o) and [6] (p) keys to display “Local”.

4. Use the bs (10-key) [–] and [+] keys to specify the local control setting.

Enabling the Accomp Out setting causes Auto Accompaniment data to be sent to the computer.



3. Use the bs (10-key) [4] (o) and [6] (p) keys to display “AcompOut”.

4. Use the bs (10-key) [–] and [+] keys to turn Accomp Out on or off.

Navigate (L) Channel

Navigate (R) Channel

SoundOn-

screen Guide

SoundOn-

screen Guide

(1) R only displayed × ×

(2) L only displayed × ×

(3) LR displayed × ×

(4) LR nor displayed

Selected channel indicator appears.

Local Control

Accomp Out

L o c a l

A c o m p O u t


E-62

You can transfer sampled sounds, recorded songs, and other data in Digital Keyboard memory to a computer for storage. You also can load standard MIDI file (SMF) data, and Auto Accompaniment data you download from the CASIO website to the Digital Keyboard, which greatly expands the Song Bank songs and Auto Accompaniment patterns available to you.A special Data Manager application is required in order to transfer data to and from the Digital Keyboard.

You can transfer the types of data listed below between the Digital Keyboard and a computer.

1. Go to the CASIO WORLDWIDE site at the following URL.http://world.casio.com/

2. At the site, select a geographic area or country.

3. After accessing the area site, navigate to the minimum computer system requirements for Data Manager for this product.• You should be able to find a link to Data Manager

information on the product introduction page of this product. If you cannot find such a link, use the search form of the area site where you are located to enter the model name of this product and search for it.

• Note that site contents are subject to change without notice.

4. Check if your computer system complies with the minimum requirements for Data Manager.

5. Download Data Manager and its user’s guide to your computer.

6. Follow the procedure in the user’s guide that you downloaded in step 5 to install and use Data Manager.• You can download accompaniment data from the

Internet Data Expansion system of the CASIO MUSIC SITE (http://music.casio.com/) and load it into the memory of this Digital Keyboard. Note that there is not any accompaniment data intended specifically for this model, so you should use data for other models.

• Since the accompaniment data is for other models, you may experience some abnormalities when playing it on this model.

Maintaining Data in MemoryAfter you save data in memory, it will remain there as long as power is supplied to the keyboard. However, if you disconnect the AC adaptor when there are no batteries loaded, saved data will be deleted.





Storing and Loading Digital Keyboard Memory Data

Data Types Supported for Data Transfer

Data Type DescriptionFile Name Extension

Sampled sound (page E-19)

Sampled sound dataTW7DW7*1

User rhythms (page E-44)

Edited Auto Accompaniment data

AC7

User songs (page E-30)

Song data loaded from a computer (Cannot be sent from the Digital Keyboard to a computer.)

CM2MID*2

Recorded songs (page E-50)

Recorded song dataSP7SL7*3

Registration setups (page E-48)

Tone and rhythm setup settings

RM7

All data Above data AL7

*1: Sampled drum set sounds*2: Standard MIDI file (format 0, 1)*3: Data recorded playing along with built-in song

Downloading Data Manager

En

glis

h


E-63

This Digital Keyboard can be connected to commercially available stereo, amplifier, or recording equipment, to a portable audio player or other equipment.

Connection requires commercially available connecting cords, supplied by you.

• Turn off the external device when making connections. After connecting, turn down the Digital Keyboard and external device volume levels whenever turning power on or off.

• After connecting, turn on the Digital Keyboard and then the external device.

• If keyboard notes sound distorted when they are sounded from external audio equipment, lower the Digital Keyboard’s volume setting.

Connection requires commercially available connecting cords, supplied by you. The connecting cords should have a stereo mini plug on one end and a plug that matches the configuration of the external device on the other end.

• Turn off the Digital Keyboard when making connections. After connecting, turn down the Digital Keyboard and external device volume levels whenever turning power on or off.

• After connecting, turn on the external device and then the Digital Keyboard.

• If notes are distorted when they are sounded on the external device, lower the volume setting of the external device.

Connecting to Audio Equipment

Outputting Keyboard Notes to Audio Equipment

Digital Keyboard PHONES/OUTPUT jack

Stereo standard plug

Audio equipment, amplifier, etc.

Playing an External Device from the Digital Keyboard

Stereo mini plug

Digital Keyboard AUDIO IN jack

Portable audio player, etc.

E-64

Reference

Troubleshooting

Symptom Action

Included Accessories

I can’t find something that should be here. Carefully check inside all of the packing materials.

Power Requirements

Power will not turned on. • Check the AC adaptor or make sure that the batteries are facing correctly (page E-8).

• Replace the batteries with new ones or switch over to AC adaptor power (page E-8).

The Digital Keyboard outputs a loud sound and then suddenly powers down.

Replace the batteries with new ones or switch over to AC adaptor power (page E-8).

The Digital Keyboard suddenly powers down after a few minutes.

This happens when Auto Power Off (page E-9) is triggered.

Display

The display keeps going out or are flashing. Replace the batteries with new ones or switch over to AC adaptor power (page E-8).

On-screen keyboard keys or notes remain on the display.

A Step Up Lesson is in progress and the Digital Keyboard is waiting for you to play the next note in the song. To stop this from happening, cancel the lesson (page E-33).

Screen contents are visible only from straight ahead. This is dues to production limitations. It does not indicate malfunction.

Sound

Nothing happens when I press any keyboard key. • Adjust the main volume setting (page E-9).• Check if something is plugged into ek (PHONES/OUTPUT jack) on

the back of the Digital Keyboard.• If there is no sampled sound in memory, nothing will play if you press

a keyboard key while a tone in the range of 571 to 578 is selected (page E-20).

• Turn power off and then back on to initialize all keyboard settings (page E-9).

Nothing happens or notes do not play normally when I play notes on the left side of the keyboard.

Press bn to disable chord input in the accompaniment keyboard area (page E-39).

Nothing happens when I start an Auto Accompaniment.

• With rhythms 170, and 172 to 180, nothing will sound until you play a chord on the keyboard. Try playing a chord (page E-39).

• Check and adjust the accompaniment volume setting (page E-42).• If there is no user rhythm stored in memory, Auto Accompaniment

will not start when you press bm while a rhythm in the range of 181 to 190 is selected (page E-44).

• Turn power off and then back on to initialize all Digital Keyboard settings (page E-9).

Nothing happens when I start playback of a built-in song.

• It takes a little time after you press the button until the song starts to play. Wait for a moment for the song to start.

• Check and adjust the song volume (page E-30).• If there is no user song stored in memory, song playback will not

start when you press bm while a song in the range of 153 to 162 is selected (page E-30).


The metronome does not sound. • Check and adjust the accompaniment volume setting (page E-42).• Check and adjust the song volume (page E-30).• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-9).

En

glis

h

Reference

E-65

Notes keep sounding, without stopping. • Turn power off and then back on to initialize all Digital Keyboard settings (page E-9).

• Replace the batteries with new ones or switch over to AC adaptor power (page E-8).

Some notes are cut off while they are playing. Notes are cut off whenever the number of notes being sounded exceeds the maximum polyphony value of 48 (24 for some tones). This does not indicate malfunction. See “Maximum Polyphony” in the “Tone List” in the separate “Appendix”.

The volume or tone setting I made has changed. • Adjust the main volume setting (page E-9).• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-9).• Replace the batteries with new ones or switch over to AC adaptor

power (page E-8).

Output volume does not change even though is change my keyboard touch.

• Change the Touch Response setting (page E-10).• Turn power off and then back on to initialize all Digital Keyboard


In certain keyboard ranges, the volume and tone quality sound are slightly different from those in other keyboard ranges.

This is due to system limitations. It does not indicate malfunction.

With some tones, octaves do not change at the far ends of the keyboard.

This is due to system limitations. It does not indicate malfunction.

The pitch of the notes does not match other accompanying instruments or sounds strange when played long with other instruments.

• Check and adjust the transpose (page E-17) and tuning settings (page E-17).


The reverb of notes seems to change suddenly. • Check and adjust the reverb setting (page E-16).• Turn power off and then back on to initialize all Digital Keyboard


Operation

When I perform a skip forward or skip back operation, the skip operation moves multiple song measures instead of only a single measure.

While song playback is stopped or a Step Up Lesson is in progress, skip forward and skip back operations are performed in phrase units (page E-28).

Tone, rhythm, and other settings revert to their initial defaults whenever you turn on the Digital Keyboard.

Though Digital Keyboard settings reset when you turn off the Digital Keyboard, you can save setups to registration memory for instant recall whenever you need them (page E-48).

Computer Connection

I can’t exchange data between the Digital Keyboard and a computer.

• Check to make sure that the USB cable is connected to the Digital Keyboard and computer, and that the device is selected correctly with your computer’s music software settings (page E-59).

• Turn off the Digital Keyboard and then exit the music software on your computer. Next, turn the Digital Keyboard back on and then restart the music software on your computer.

Symptom Action

Reference

E-66

Specifications

Model WK-210

Keyboard 76 standard-size keys

Touch Response 2 types, Off

Maximum Polyphony 48 notes (24 for certain tones)

Tones

Built-in Tones 570

Sampling Tones Up to 8 (Melody Sampling: 5, Drum Sampling: 3)*Up to 10 seconds

Functions Layer, Split

Reverb 1 to 10, Off

Chorus 1 to 5, Off

Voice Pad 5 pads × 4 sets(3 sets for sampled sounds, 1 set for percussion only)

Metronome

Beats per Measure 0, 2 to 6

Tempo Range 30 to 255

Song Bank

Built-in Songs 152

User Songs Up to 10*Step Up Lesson

Lessons 4 (Listen, Watch, Remember, Auto)

Lesson Part L, R, LR

Functions Repeat, Voice Fingering Guide, Note Guide, Performance Evaluation

Music Challenge 20 notes

Auto Accompaniment

Built-in Rhythms 180

User Rhythms Up to 10 (Accompaniment Edit)*Registration 32 (4 setups × 8 banks)

Recorder Real-time recording, playback

Keyboard Play 5 songs, 6 tracks

Playing Along with a Built-in Songs 1 song (L, R, LR)

Memory Capacity Approximately 12,000 notes (total for 6 songs)

Other Functions

Transpose ±1 octaves (–12 to +12 semitones)

Octave Shift Upper/Lower ±2 octaves

Tuning A4 = approx. 440 Hz ±100 cents

Preset Scales 17

Music Preset 305

One Touch Preset 180

Auto Harmonize 12 types

Arpeggiator 90 types

MIDI 16 multi-timbre received, GM Level 1 standard

Musical Information Function Tone, Rhythm, Song Bank, numbers and names; staff notation, fingering, pedal operation, tempo, measure and beat number, chord name, etc.

En

glis

h

Reference

E-67

• Design and specifications are subject to change without notice.* This data is stored in a shared memory area with a total capacity of approximately 320Kbytes (1Kbyte = 1,024bytes).

Be sure to read and observe the following operating precautions.

LocationAvoid the following locations for this product.• Areas exposed to direct sunlight and high humidity• Areas subjected to temperature extremes• Near a radio, TV, video deck, or tuner

The above devices will not cause malfunction of the product, but interference from the product can cause audio or video interference of a nearby device.

User Maintenance• Never use benzine, alcohol, thinner, or other chemical agents to clean the product.• To clean the product or its keyboard, wipe with a soft cloth moistened in a weak solution of water and a mild neutral detergent.

Wring all excess moisture from the cloth before wiping.

Included and Optional AccessoriesUse only accessories that are specified for use with this product. Use of unauthorized accessories creates the risk of fire, electric shock, and personal injury.

Weld LinesLines may be visible on the exterior of the product. These are “weld lines” that result from the plastic molding process. They are not cracks or scratches.

Musical Instrument EtiquetteAlways be aware of others around you whenever using this product. Be especially careful when playing late at night to keep the volume at levels that do not disturb others. Other steps you can take when playing late at night are closing the window and using headphones.

Inputs/Outputs

USB port TYPE B

Sustain/Assignable jack Standard jack (sustain, sostenuto, soft, rhythm start/stop)

Phones/Output jack Stereo standard jackOutput Impedance: 200Ω, Output Voltage: 4.5V (RMS) MAX

Audio In jack Stereo mini jackInput Impedance: 9kΩ, Input Sensitivity: 200mV

Mic In jack Standard jackInput Impedance: 3kΩ, Input Sensitivity: 10mV

Power Jack 9V DC

Power Supply 2-way

Batteries 6 D-size zinc-carbon batteries or alkaline batteries

Battery Life Approximately 5 hours continuous operation on zinc-carbon batteries

AC Adaptor AD-5

Auto Power Off Approximately 6 minutes after last key operation (Operates during battery use only)

Speakers 12cm × 2 (Output: 2.5W + 2.5W)

Power Consumption 9V = 7.7W

Dimensions 118.7 × 40.0 × 15.5 cm (46 3/4 × 15 3/4 × 6 1/8 inch)

Weight Approximately 7.2kg (15.9 lbs) (without batteries)

Operating Precautions

Reference

E-68

Error Messages

Display Message

Cause Action

Err Exist A sampled drum set sound cannot be copied (page E-23) to a keyboard key because the key already has a sampled sound assigned to it.

• Delete the sampled sound that is currently assigned to the key you are copying to (page E-24).

• Copy the sampled sound to another key that does not yet have a sampled sound assigned to it.

Err Limit The tone number you selected before starting sampling already has the allowable maximum of eight sampled sounds assigned to it.

• Delete the one or more of the sampled sounds currently assigned to the tone number (page E-24).

• Select another tone number that has less than eight sampled sounds currently assigned to it (page E-22).

Err Mem Full There is not enough memory available for sampling or Auto Accompaniment editing.

Delete some or all of the following user data from memory to make room for new data.Sampled sounds (page E-19), user rhythms (page E-44), user songs (page E-30)

Err No Data There is no data in the selected user area (tone, rhythm, song number, etc.)

Select a Digital Keyboard user area that contains data.

Err Protect Sampled sounds are protected. Unprotect one or more of the sampled sounds, which will allow it to be overwritten or deleted.

Err SizeOver Auto Accompaniment editing cannot be performed because the accompaniment pattern or instrument part data is too large.

Select a different accompaniment pattern or instrument parts.

En

glis

h

Reference

E-69

Song List

SONG BANK

WORLD001 TWINKLE TWINKLE LITTLE STAR002 LIGHTLY ROW003 LONG LONG AGO004 ON TOP OF OLD SMOKEY005 SAKURA SAKURA006 WHEN THE SAINTS GO MARCHING IN007 AMAZING GRACE008 AULD LANG SYNE009 COME BIRDS010 DID YOU EVER SEE A LASSIE?011 MICHAEL ROW THE BOAT ASHORE012 DANNY BOY013 MY BONNIE014 HOME SWEET HOME015 AURA LEE016 HOME ON THE RANGE017 ALOHA OE018 SANTA LUCIA019 FURUSATO020 GREENSLEEVES021 JOSHUA FOUGHT THE BATTLE OF JERICHO022 THE MUFFIN MAN023 LONDON BRIDGE024 UNDER THE SPREADING CHESTNUT TREE025 SIPPIN’ CIDER THROUGH A STRAW026 GRANDFATHER’S CLOCK027 ANNIE LAURIE028 BEAUTIFUL DREAMER

029 IF YOU’RE HAPPY AND YOU KNOW IT, CLAP YOUR HANDS

030 MY DARLING CLEMENTINE031 LITTLE BROWN JUG032 HOUSE OF THE RISING SUN033 SHE WORE A YELLOW RIBBON034 YANKEE DOODLE035 MY OLD KENTUCKY HOME036 SZLA DZIEWECZKA037 TROIKA038 WALTZING MATILDA039 ON THE BRIDGE OF AVIGNON040 I’VE BEEN WORKING ON THE RAILROAD041 OH! SUSANNA042 CAMPTOWN RACES043 JEANNIE WITH THE LIGHT BROWN HAIR044 TURKEY IN THE STRAW045 JAMAICA FAREWELL

EVENT046 SILENT NIGHT047 WE WISH YOU A MERRY CHRISTMAS048 JINGLE BELLS049 JOY TO THE WORLD050 O CHRISTMAS TREE

PIANO/CLASSICS051 MARY HAD A LITTLE LAMB052 LE CYGNE FROM “LE CARNAVAL DES ANIMAUX”053 JE TE VEUX054 SONATA op.13 “PATHÉTIQUE” 2nd Mov.

055 HEIDENRÖSLEIN056 AIR FROM “SUITE no.3”057 SPRING FROM “THE FOUR SEASONS”058 HABANERA FROM “CARMEN”059 BRINDISI FROM “LA TRAVIATA”060 HUNGARIAN DANCES no.5061 MINUET IN G MAJOR062 MUSETTE IN D MAJOR063 GAVOTTE (GOSSEC)064 ARABESQUE (BURGMÜLLER)065 CHOPSTICKS066 DECK THE HALL067 ODE TO JOY068 AVE MARIA (GOUNOD)069 SONATINA op.36 no.1 1st Mov.070 PRELUDE op.28 no.7 (CHOPIN)071 RÊVERIE072 GYMNOPÉDIES no.1073 GOING HOME FROM “FROM THE NEW WORLD”074 FÜR ELISE075 TURKISH MARCH (MOZART)076 SONATA op.27 no.2 “MOONLIGHT” 1st Mov.077 ETUDE op.10 no.3 “CHANSON DE L’ADIEU”078 THE ENTERTAINER

079 WEDDING MARCH FROM “MIDSUMMER NIGHT’S DREAM”

080 AMERICAN PATROL081 FRÖHLICHER LANDMANN082 LA CHEVALERESQUE083 SONATA K.545 1st Mov.084 LA PRIÈRE D’UNE VIERGE085 VALSE op.64 no.1 “PETIT CHIEN”086 LIEBESTRÄUME no.3087 JESUS BLEIBET MEINE FREUDE088 CANON (PACHELBEL)089 SERENADE FROM “EINE KLEINE NACHTMUSIK”090 MARCH FROM “THE NUTCRACKER”091 INVENTIONEN no.1092 PRAELUDIUM no.1 (J.S.BACH)093 SONATINE op.20 no.1 1st Mov.094 HUMORESKE (DVO ÁK)095 DOLLY’S DREAMING AND AWAKENING096 LA FILLE AUX CHEVEUX DE LIN097 ARABESQUE no.1 (DEBUSSY)098 TRÄUMEREI099 MAPLE LEAF RAG100 NOCTURNE op.9 no.2 (CHOPIN)

EXERCISE101 - 150 EXERCISE I / II / III

DEMO TUNES151 - 152 DEMO TUNES

USER SONGS153 - 162 USER SONGS

Reference

E-70

Ch

ord

Exa

mp

le L

ist

Roo

t

Cho

rdT

ype M m di

m

aug

sus4

sus2 7 m7

M7

m7b 5

7b 5

7sus

4

add9

mad

d9

mM

7

dim

7

69 6 m6

( A# )

/Bb

BF# /(

Gb )

G( G

# )/Ab

AF

CC# /(

Db )

D( D

# )/Eb

E

•S

ince

the

chor

d in

put r

ange

is li

mite

d, th

is m

odel

may

not

sup

port

som

e of

the

chor

ds s

how

n ab

ove.

Fu

nct

ion

Tran

smit

ted

Rec

og

niz

edR

emar

ks

Bas

ic

Ch

ann

el1

1 -

161

- 16

1 -

16D

efau

lt C

hang

ed

No

teN

um

ber

0 -

127

0 -

127 *1

4 -

127

True

voi

ce

Aft

er

Tou

ch

Co

ntr

ol

Ch

ang

e

X XX O

Pit

ch B

end

erO

X

Key

’sC

h’s

Vel

oci

tyO

9nH

v =

1 -

127

X 9

nH v

= 0

, 8nH

V =**

O 9

nH v

= 1

- 1

27X

9nH

v =

0N

ote

ON

Not

e O

FF

Mo

de

Mod

e 3

XM

ode

3X

Def

ault

Mes

sage

sA

ltere

d

0, 3

2 16,

38 7 10 11 64

Ban

k se

lect

Mod

ulat

ion

Dat

a en

try

Vol

ume

Pan

Exp

ress

ion

Hol

d 1

Mo

del

: WK

-210

Ver

sio

n :

1.0

O X X O O X O*3

O O O O O O O

(MS

B o

nly)

*2

**:n

o re

latio

n**

:sin

rel

ació

n

MID

I Im

ple

men

tati

on

Ch

art

Pro

gra

mC

han

ge

O 0

- 1

27O

0 -

127

:Tru

e #

Sys

tem

Exc

lusi

veO

*4

O

Sys

tem

C

om

mo

nX X X

X X X

: Son

g P

os: S

ong

Sel

: Tun

e

Au

x

Mes

sag

es

Rem

arks

X O X X

X O O X

: Loc

al O

N/O

FF

: All

note

s O

FF

: Act

ive

Sen

se: R

eset

Sys

tem

R

eal T

ime

O OX X

: Clo

ck: C

omm

ands

66 67 91 9310

0, 1

01 120

121

Sos

tenu

toS

oft p

edal

Rev

erb

send

Cho

rus

send

RP

N L

SB

, MS

BA

ll so

und

off

Res

et a

ll co

ntro

ller

Mod

e 1

: OM

NI O

N, P

OLY

M

ode

3 : O

MN

I OF

F, P

OLY

Mod

e 2

: OM

NI O

N, M

ON

O

Mod

e 4

: OM

NI O

FF,

MO

NO

O :

Yes

X :

No

O O X O X X O

*3*3

O O O O O O O

*2

*5 *6

*1:D

epen

ds o

n to

ne.

*2:R

PN

: P

itch

Ben

d S

ensi

tivity

, Fin

e T

une,

Coa

rse

Tun

e*3

:In

acco

rdan

ce w

ith p

edal

effe

ct s

ettin

g.*4

:Uni

vers

al S

yste

m E

xclu

sive

Mes

sage

s :

Mas

ter

Fin

e T

unin

g, M

aste

r C

oars

e T

unin

g, R

ever

b T

ime,

Cho

rus

Typ

e*5

:Uni

vers

al S

yste

m E

xclu

sive

Mes

sage

s :

GM

Sys

tem

On/

Off,

GM

2 S

yste

m O

n, M

aste

r V

olum

e, M

aste

r F

ine

Tun

ing,

Mas

ter

Coa

rse

Tun

ing,

Rev

erb

Tim

e, C

horu

s T

ype,

Cho

rus

Mod

ulat

ion

Rat

e*6

:Thi

s m

odel

’s S

yste

m E

xclu

sive

Mes

sage

•F

or d

etai

ls a

bout

foot

note

s 2,

4, 5

, 6, s

ee M

IDI I

mpl

emen

tatio

n at

ht

tp://

wor

ld.c

asio

.com

/ .

*1:

Dep

ende

del

tono

.*2

:R

PN

: S

ensi

bilid

ad a

la in

flexi

ón d

e al

tura

tona

l, af

inac

ión

prec

isa,

afin

ació

n ap

roxi

mad

a*3

:D

e ac

uerd

o co

n el

aju

ste

de e

fect

o de

ped

al.

*4:

Men

saje

s ex

clus

ivos

de

sist

ema

univ

ersa

l : A

finac

ión

mae

stra

pre

cisa

, afin

ació

n m

aest

ra a

prox

imad

a, ti

empo

de

reve

rber

ació

n, T

ipo

de c

oro

*5:

Men

saje

s ex

clus

ivos

de

sist

ema

univ

ersa

l : S

iste

ma

GM

act

ivad

o/de

sact

ivad

o, s

iste

ma

GM

2 ac

tivad

o, v

olum

en g

ener

al, a

finac

ión

mae

stra

pre

cisa

, afin

ació

n m

aest

ra

apro

xim

ada,

tiem

po d

e re

verb

erac

ión,

tipo

de

coro

, tas

a de

mod

ulac

ión

al c

oro

*6:

Men

saje

exc

lusi

vo d

el s

iste

ma

de e

ste

mod

elo

•S

i des

ea in

form

ació

n so

bre

las

nota

s al

pie

de

pági

na 2

, 4, 5

, 6, c

onsu

lte

Impl

emen

taci

ón M

IDI e

n ht

tp://

wor

ld.c

asio

.com

/

MA0901-A Printed in China WK210ES1A

F

This recycle mark indicates that the packaging conforms to the environmental protection legislation in Germany.

Esta marca de reciclaje indica que el empaquetado se ajusta a la legislación de protección ambiental en Alemania.

USER’S GUIDE English - Support | Home | CASIOsupport.casio.com/pdf/008/WK210E1A_web.pdf ·...

Documents

Transcript of USER’S GUIDE English - Support | Home | CASIOsupport.casio.com/pdf/008/WK210E1A_web.pdf ·...