User’s Guide for Nokia N71nds2.webapps.microsoft.com/.../Nokia_N71_APAC_UG_en.pdfYour Nokia N71 1...

User’s Guide for Nokia N71

Copyright © 2006 Nokia. All rights reserved.

DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product RM-67 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/

Copyright © 2006 Nokia. All rights reserved.Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.Nokia, Nokia Connecting People, Pop-Port, and Visual Radio are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.Nokia tune is a sound mark of Nokia Corporation.

This product includes software licensed from Symbian Software Ltd ©1998-200(6). Symbian and Symbian OS are trademarks of Symbian Ltd.

Java™ and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. Stac ®, LZS ®, ©1996, Stac, Inc., ©1994-1996 Microsoft Corporation. Includes one or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425. Other patents pending.Hi/fn ®, LZS ®, ©1988-98, Hi/fn. Includes one or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425. Other patents pending.Part of the software in this product is © Copyright ANT Ltd. 1998. All rights reserved.US Patent No 5818437 and other pending patents. T9 text input software Copyright ©1997-2006. Tegic Communications, Inc. All rights reserved.

This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information including that relating to promotional, internal and commercial uses may be obtained from MPEG LA, LLC. See <http://www.mpegla.com>.Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.The contents of this document are provided ‘as is’. Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.FCC / INDUSTRY CANADA NOTICEYour device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

i

9243184_N71-1_en_apac.book Page 1 Friday, May 26, 2006 2:31 PM

Cop

For

YoSetTranEsseKeyVolCloMeFileUseMuHelTut

CaCamTakEditTipsVidRec

......................................18 clips ............................................ 19

........................................................ 19

........................................................ 21

........................................................ 21

........................................................ 22

........................................................ 22

s ..................................24........................................................ 24........................................................ 26

......................................28........................................................ 29ges ................................................. 30ges ................................................ 32........................................................ 34IM card ......................................... 36........................................................ 36

......................................41........................................................ 41ervice) ........................................... 43

Co

ii


yright © 2006 Nokia. All rights reserved.

your safety........................................... v

ur Nokia N71.........................................1tings.....................................................................................1sfer content .....................................................................1ntial indicators................................................................2pad lock (keyguard) ........................................................3ume and loudspeaker control.......................................3ck ..........................................................................................3mory card tool ..................................................................4 manager............................................................................5ful shortcuts .....................................................................6ltimedia key.......................................................................7p............................................................................................8orial......................................................................................8

mera........................................................9era display .......................................................................9

e pictures ........................................................................ 10 images ........................................................................... 13 on taking good photographs................................... 13eo recorder display ....................................................... 14ord videos ....................................................................... 15

Gallery.................View images and videoEdit video clips.............Slide show.....................Presentations................Albums ...........................Image print ...................

Media applicationRealPlayer......................Movie director..............

Messaging...........Write text ......................Write and send messaInbox — receive messaMailbox ..........................View messages on a SMessaging settings.....

Make calls ..........Voice calls .....................Video calls (network s

ntents

06 Nokia. All rights reserved.

....................................66.....................................................66..................................................... 66ntries.........................................67.....................................................67

....................................68..................................................... 68..................................................... 68.....................................................68..................................................... 69

vice ...........................70..................................................... 70 device ...................................... 71..................................................... 72

....................................73..................................................... 73..................................................... 76..................................................... 77..................................................... 77..................................................... 77..................................................... 78..................................................... 78

iii


Copyright © 20

Video sharing (network service) ......................................44Answer or reject a call .......................................................47Log ...........................................................................................49

Contacts (phonebook) ............................ 51Save names and numbers .................................................51Copy contacts.......................................................................52Add ringing tones for contacts........................................53Create contact groups........................................................53

Services .................................................... 54Services access point..........................................................54Bookmarks view ...................................................................54Connection security ............................................................55Browse ....................................................................................55Download and purchase items ........................................56End a connection.................................................................56Services settings ..................................................................56

My own .................................................... 58Music player..........................................................................58Visual Radio (network service) ........................................59Instant messaging (network service) .............................62Go to — add shortcuts .......................................................65Games .....................................................................................65

Calendar................Create calendar entriesCalendar views................Manage your calendar eCalendar settings ...........

Office ....................Calculator .........................Converter ..........................Notes..................................Recorder............................

Personalize your deProfiles — set tones .......Change the look of yourActive standby mode.....

Connectivity .........Bluetooth connectivity .Infrared connection.......Data cbl.............................PC connections ...............Connection manager.....Synchronization..............Device manager ..............

iv



Tools..........................................................80Settings.................................................................................. 80Voice commands ................................................................. 90Application manager.......................................................... 90Activation keys .................................................................... 92

Troubleshooting .......................................94Q&A......................................................................................... 94

Battery information ................................97Charging and discharging................................................. 97Nokia battery authentication guidelines ..................... 97

Nokia original enhancements.............. 100Battery .................................................................................101Nokia Wireless Headset HS-26W ................................101Nokia Wireless Headset HS-36W.................................102Nokia Universal Holder CR-39 ......................................103

Care and maintenance ......................... 104

Additional safety information............. 105

Index ...................................................... 109


WHEN REFUELLING Do not use a refuelling point. Do not use hemicals.

NEAR BLASTING Follow any o not use the device where progress.

Y Use only in the normal plained in the product n. Do not touch the antenna .

ERVICE Only qualified personnel repair this product.

NTS AND BATTERIES Use only ancements and batteries. Do not

patible products.

STANCE Your device is not nt. Keep it dry.

PIES Remember to make s or keep a written record of all

ormation stored in your device.

v

9243184_N71-1_en_apac.book Page v Friday, May 26, 2006 2:31 PM

Copyright © 20

For your safetyRead these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.

SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.

ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.

INTERFERENCE All wireless devices may be susceptible to interference, which could affect performance.

SWITCH OFF IN HOSPITALS Follow any restrictions. Switch the device off near medical equipment.

SWITCH OFF IN AIRCRAFT Follow any restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF the device at near fuel or c

SWITCH OFF restrictions. Dblasting is in

USE SENSIBLposition as exdocumentatiounnecessarily

QUALIFIED Smay install or

ENHANCEMEapproved enhconnect incom

WATER-RESIwater-resista

BACK-UP COback-up copieimportant inf

any features in this device, other lock, the device must be switched h the device on when wireless ause interference or danger.

cesust have service from a wireless

of the features in this device he wireless network to function. may not be available on all ve to make specific arrangements er before you can utilize network ovider may need to give you for their use and explain what e networks may have limitations use network services. For instance, support all language-dependent

. Network features are designated k service).

ay have requested that certain not activated in your device. If so, your device menu. Your device may configured. This configuration menu names, menu order and ice provider for more information.

vi

9243184_N71-1_en_apac.book Page vi Friday, May 26, 2006 2:31 PM


CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.

EMERGENCY CALLS Ensure the phone function of the device is switched on and in service. The keypad is active only in the fold open mode. Press as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press . Give your location. Do not end the call until given permission to do so.

About your deviceThe wireless device described in this guide is approved for use on the EGSM 900,1800, and 1900 and UMTS 2100 networks. Contact your service provider for more information about networks.

When using the features in this device, obey all laws and respect privacy and legitimate rights of others.

When taking and using images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others.

Warning: To usethan the alarm con. Do not switcdevice use may c

Network serviTo use the phone you mservice provider. Many depend on features in tThese network services networks or you may hawith your service providservices. Your service pradditional instructions charges will apply. Somthat affect how you cansome networks may notcharacters and servicesin this guide by (networ

Your service provider mfeatures be disabled or they will not appear on also have been speciallymay include changes inicons. Contact your serv


use with this device is BL-5C.

y batteries, chargers, and roved by Nokia for use with this he use of any other types may roval or warranty, and may be

ed enhancements, please check ou disconnect the power cord of and pull the plug, not the cord.

vii

9243184_N71-1_en_apac.book Page vii Friday, May 26, 2006 2:31 PM

Copyright © 20

This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as MMS, browsing, e-mail and content downloading using the browser or over MMS, require network support for these technologies.

For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.

Enhancements, batteries, and chargersAlways switch the device off and disconnect the charger before removing the battery.

Check the model number of any charger before use with this device. This device is intended for use when supplied with power from a DC-4, AC-3 and AC-4 charger, and from an AC-1, ACP-7, ACP-8, ACP-9, ACP-12, LCH-8, LCH-9, or LCH-12 charger when used with the charger adapter CA-44.

The battery intended for

Warning: Use onlenhancements appparticular model. Tinvalidate any appdangerous.

For availability of approvwith your dealer. When yany enhancement, grasp

vii

9243184_N71-1_en_apac.book Page viii Friday, May 26, 2006 2:31 PM

Copyright © 2006 Nokia. All rights reserved.i


Your

Nok

ia N

71

1

ard in the other device. When without a SIM card, the offline ctivated.

for the first time, press , and r. If you have used the want to start a new transfer,

In the information view, select

nt to use Bluetooth connectivity the data. Both devices must onnection type.

h connectivity to search for ue. The visibility of the other lect your other device from the nter a code on your Nokia N71.

gits), and select OK. Enter the er device, and select OK. The d. See "Pair devices", on page 75.ls, the Transfer application is ce as a message. To install device, open the message, and s on the display.connect the two devices. See , on page 76.


Copyright © 20

Your Nokia N71Model number: Nokia N71

Hereinafter referred to as Nokia N71.

SettingsYour Nokia N71 normally has MMS, GPRS, streaming, and mobile Internet settings automatically configured, based upon your service provider or network operator information. You may have settings from your service providers already installed in your device, or you may receive the settings from the service providers as a special text message.

Transfer content

You can transfer content, such as contacts, from a compatible Nokia device to your Nokia N71 using Bluetooth connectivity or infrared. The type of content that can be transferred depends on the phone model. If the other device supports synchronization, you can also synchronize data between the other device and your Nokia N71.

You can insert your SIM cNokia N71 is switched onprofile is automatically aTransfer content1 To use the application

select Tools > Transfeapplication before andselect Transfer data. Continue.

2 Select whether you waor infrared to transfersupport the selected c

3 If you select Bluetootdevices, select Contindevice must be on. Selist. You are asked to eEnter a code (1–16 disame code on the othdevices are now paireFor some device modesent to the other deviTransfer on the otherfollow the instructionIf you select infrared, "Infrared connection"

2

pe is set to Silent and Message ne, and E-mail alert tone are set

d is locked.

ive.

ne is being used (network service).

device are diverted to another phone lines (network service), the e is and for the second

cted to the device.

headset with Bluetooth st.

ted to the device.

onnected to the device.

ket data connection is available.

ket data connection is active.

ket data connection is on hold.

connection is available.

connection is active.

connection is on hold.



Your

Nok

ia N

71 4 From your Nokia N71, select the content you want to copy from the other device.

Content is copied from the memory and compatible memory card (if inserted) of the other device to the corresponding location in your Nokia N71 and compatible memory card (if inserted). Copying time depends on the amount of data to be transferred. You can cancel copying and continue later.

If the other device supports synchronization, you can keep the data up-to-date in both devices. To start a synchronization with a compatible Nokia device, select Phones, scroll to the device, and select Options > Synchronise. Follow the instructions on the display.

Essential indicators The device is being used in a GSM network.

The device is being used in a UMTS network (network service).

You have one or more unread messages in the Inbox folder in Messag..

You have received new e-mail in the remote mailbox.

There are messages waiting to be sent in the Outbox folder.

You have missed calls.

Shown if Ringing tyalert tone, IM alert toto Off.

The device keypa

A clock alarm is act

The second phone li

All calls to the number. If you have twoindicator for the first lin

.

A headset is conne

The connection to aconnectivity has been lo

A loopset is connec

A Text phone is c

A data call is active.

A GPRS or EDGE pac

A GPRS or EDGE pac

A GPRS or EDGE pac

A UMTS packet data

A UMTS packet data

A UMTS packet data


Your

Nok

ia N

71

3

udspeaker controle ve

ing .

allows you to speak and listen out having to hold the device to

hold the device near your ear ker is in use, because the volume loud.

ring a call, select Options >

er, select Options > Activate

e and date in fold closed mode, cover key.

k. To set a new alarm, select en an alarm is active, is


Copyright © 20

Bluetooth connectivity is on.

Data is being transmitted using Bluetooth connectivity.

A USB connection is active.

An infrared connection is active. If the indicator is blinking, the device is trying to connect to the other device or the connection has been lost.

Keypad lock (keyguard)Use the keypad lock to prevent the keys from being accidentally pressed.

To lock, in standby mode, press , then . When the keys are locked, is shown on the display.

To unlock in fold open mode, press , then .

To lock the keypad, in fold open mode press the power key, and select Lock keypad.

To lock the keypad, in fold closed mode press the power key twice to select Lock keypad, and press the cover key.

When the keypad lock is on, calls may be possible to the official emergency number programmed into your device.

To turn on the display light when the keypad lock is on, press the power key.

Volume and loTo increase or decrease thvolume level when you haan active call or are listento a sound, press or

The built-in loudspeaker from a short distance withyour ear.

Warning: Do not when the loudspeamay be extremely

To use the loudspeaker duActivate loudsp..

To turn off the loudspeakhandset.

Clock

Tip! To view the timpress and hold the

Press , and select ClocOptions > Set alarm. Whshown.

4

view, open Clock, and press . , you can view the time in

select Options > Add city. You can ities to the list.

, scroll to a city, and select city. The city is displayed in the e time in your device is changed lected. Check that the time is ur time zone.

y card tool

pproved by Nokia for use with this e approved industry standards for ll other brands may function patible with this device.

ls > Memory. le memory card nd for backing e device



Your

Nok

ia N

71 To turn off the alarm, select Stop, or to stop the alarm for 5 minutes, select Snooze.

If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger.

To cancel an alarm, select Clock > Options > Remove alarm.

Clock settingsTo change the clock settings, select Clock > Options > Settings.

To change the time or date, select Time or Date.

To change the clock shown in the standby mode, select Clock type > Analogue or Digital.

To allow the mobile phone network to update the time, date, and time zone information to your device (network service), select Network operator time > Auto-update.

To change the alarm tone, select Clock alarm tone.

World clockTo open the world clockIn the world clock viewdifferent cities.

To add cities to the list, add a maximum of 15 c

To set your current cityOptions > My current clock main view, and thaccording to the city secorrect and matches yo

Memor

Use only miniSD cards adevice. Nokia utilizes thmemory cards but not acorrectly or be fully com

Press , and select TooYou can use a compatibas extra storage space aup the information in thmemory.


Your

Nok

ia N

71

5

memory card to eject it from

ard, close the door, and

remove the memory card in the tion when the card is being g the card in the middle of an age the memory card as well as

ta stored on the card may be

ager

ice, such as contacts, messages, nes, calendar notes, documents, ions, use memory to store data. e depends on how much data is e memory.

memory card as extra storage rewritable, so you can delete old data on a memory card.

rs in the device memory or on a press , and select Tools > File view ( ) opens. Press to ew ( ) (if available).


Copyright © 20

To back up information from the device memory to a memory card, select Options > Backup phone mem.

To restore information from the memory card to the device memory, select Options > Restore from card.

Format a memory cardWhen a memory card is reformatted, all data on the card is permanently lost.

Some memory cards are supplied preformatted and others require formatting. Consult your retailer to find out if you must format the memory card before you can use it.

To format a memory card, select Options > Format mem. card. Select Yes to confirm.

Eject the memory card1 Before you eject the card, press

the power key, and select Remove mem. card. All applications are closed.

2 When Remove memory card and press 'OK' is displayed, open the door of the memory card slot.

3 Press and release the the slot.

4 Remove the memory cselect OK.

Important: Do notmiddle of an operaaccessed. Removinoperation may damthe device, and dacorrupted.

File man

Many features of the devimages, videos, ringing toand downloaded applicatThe free memory availablalready saved in the devic

You can use a compatiblespace. Memory cards are information and save new

To browse files and foldememory card (if inserted),mgr.. The device memoryopen the memory card vi

6

emory, use File mgr., or go to the or example, you can remove the

x, Drafts, and Sent folders in

ssages from the remote mail server

s, or sound files

tions. See also "Application 0.) of applications you have installed D card; first back up the installation PC using Nokia PC Suite.

you no longer need

ts get the most from your device. tions in this user guide for further

.

pplications that are open, press lect an application. If memory is close some applications. The device ata before closing an application.



Your

Nok

ia N

71 To move or copy files to a folder, press and at the same time to mark a file, and select Options > Move to folder or Copy to folder.

To find a file, select Options > Find and the memory from which to search, and enter a search text that matches the file name.

View memory consumption To view what types of data you have in the device and how much memory the different data types consume, select Options > Memory details. The amount of available free memory is shown in Free memory.

Memory low — free memoryThe device notifies you if the device or the memory card memory is low.

To free device memory, transfer data to a compatible memory card, if you have one. Mark files to be moved, and select Options > Move to folder > Memory card and a folder.

You can also copy media files to a compatible PC, for example, using Gallery. See "Gallery", on page 18.

Tip! You can use Nokia Phone Browser available in Nokia PC Suite to view the different memories in your device and transfer data.

To remove data to free mrespective application. Ffollowing:• Messages from Inbo

Messag.• Retrieved e-mail me• Saved Web pages• Saved images, video• Contact information• Calendar notes• Downloaded applica

manager", on page 9• Installation files (.sis

to a compatible miniSfiles to a compatible

• Any other data that

Useful shortcuUse shortcuts to quicklyRefer to the relevant secdetails of the functions

Standby mode• To switch between a

and hold , and selow, the device may saves any unsaved d


Your

Nok

ia N

71

7

ords, press and hold . At the or to highlight text.pboard, while still holding ,

a document, press and hold ,

yned to the multimedia key, press

st of multimedia applications, ired application, press , , st without selecting an

press , and press . To hat are shown when you press le, and Right and the

ixed, and you are not able to


Copyright © 20

Leaving applications running in the background increases the demand on battery power and reduces the battery life.

• To start the camera, press .• To call your voice mailbox (network service), press and

hold .• To open multimedia applications, press or press and

hold . See "Multimedia key", on page 7.• To change the profile, press , and select a profile.• If you have two phone lines (network service), press

to switch between the two lines.• To open the last dialed numbers list, press .• To use voice commands, press and hold .• To start a connection to Services, press and hold .

See "Services", on page 54.

For further shortcuts available in the standby mode, see "Active standby mode", on page 72.

Edit text and lists• To mark an item in a list, scroll to it, and press and

at the same time.• To mark multiple items in a list, press and hold

then press or . To end the selection, release or , then release .

• To select letters and wsame time, press

• To copy the text to cliselect Copy.

• To insert the text into and select Paste.

Multimedia keTo open the shortcut assigand hold . To open a lipress . To open the des

or . To exit the liapplication, press .

To change the shortcuts, change the applications t

, select Top, Left, Middapplication.

Some shortcuts may be fchange them.

8



Your

Nok

ia N

71 Help

Your device has context-sensitive help. When an application is open, select Options > Help to access help for the current view.

When you are reading the instructions, to switch between help and the application that is open in the background, press and hold .

To open help from the main menu, select Tools > Help. Select the desired application to view its help topics.

Tutorial

The tutorial gives you information about some of the features of your device. To access the tutorial in the menu, press , and select My own > Tutorial and the section you want to view.


Cam

era

9

he following:) and memory card ( )

here images are saved.(2)

the , g

e or

or

. e — 2.

at the sequence mode is active. pictures", on page 12.


Copyright © 20

CameraYour Nokia N71 has two cameras, a high resolution camera on the outside of the device, and a lower resolution camera above the inner main display, which is visible when the cover is opened. Both cameras can be used to take still pictures and video.

To activate the camera, open the cover, press , and select Camera. In the viewfinder, you can see the view to be captured.

The images and video clips are automatically saved in the Gallery. The cameras produce .jpg images. Video clips are recorded in the 3gpp file format with the .3gp file extension (normal and sharing video quality modes) or in the .mp4 file format (high video quality mode). See "Video settings", on page 16.

You can send images in a multimedia message as an e-mail attachment, or by using Bluetooth connectivity.

Tip! You can insert an image into a contact card. See "Save names and numbers", on page 51.

Your Nokia N71 supports an image capture resolution of up to 1600x1200 pixels using the primary camera. The image resolution in these materials may appear different.

Camera displayCamera indicators show t• The device memory (

indicators (1) show w• The images indicator

estimates how many images, depending onselected image qualitycan fit in the remaininmemory of your devicthe memory card.

• The self-timer indicat(3) shows that theself-timer is activatedSee "You in the picturself-timer", on page 1

• The sequence mode indicator (4) shows thSee "Take time-lapse

10

, do any of the following: keep the image, select Options >

ia multimedia, Via e-mail, or Via frared, select Options > Send. For ee "Messaging", on page 28 and vity", on page 73. This option is not active call. the other party during an active > Send to caller.elect Options > Edit. See "Edit .select Options > Print. See "Image

attery saving mode if you do not r a while. To continue taking

ve, press or , or select



Cam

era Take pictures

If the camera is in video mode, open the image mode by selecting Options > Image mode.

To select the secondary camera (for example, to include yourself in the picture), select Options > Use second. cam.. To use the main camera again, select Options > Use main camera.

To zoom in and out, press or . The zoom indicator, which is displayed on the side of the viewfinder, shows the zoom level. The quality (resolution) of a zoomed picture is lower than that of a nonzoomed picture.

To take a picture, press . Do not move the device before the image is saved. The image is saved automatically in the Images & videofolder of Gallery. See "Gallery", on page 18.

Saving the captured image may take longer if you change the zoom, lighting, or color settings.

To select the shooting mode; flash, colour and lighting settings; or view the Last image before taking a picture, see "Camera setup", on page 10.

After the image is taken• If you do not want to

Delete, or press .• To send the image V

Bluetooth, or Via inmore information, s"Bluetooth connectiavailable during an

• To send an image tocall, select Options

• To edit the picture, simages", on page 13

• To print the picture, print", on page 22.

The camera goes into bmake any key presses fopictures, press .

Camera setupIf the viewfinder is actiOptions > Open setup.


Cam

era

11

ashlight for low light conditions.

n using the flash. Do not use the at close range. Do not cover the re.

s are available: Automatic, On,

setting and press .

r Automatic during bright emits a low light when an image e subject of the picture to see . There is no flash effect on the

tting that matches the current llows the camera to reproduce

ng and press .

r effect setting and press .

ken, press .


Copyright © 20

Press or to choose the item to be viewed or adjusted, and press . The settings available depend on which camera is in use.

To reactivate the viewfinder, press Cancel or .

The settings return to the default settings when you close the Camera.

Shooting modeThe settings of each shooting mode have been set to match a certain style or environment.

The following shooting modes are available: Automatic, User defined, Portrait, Landscape, Sports and Night.

Scroll to the appropriate shooting mode for taking a picture, and press .

When taking pictures, the default shooting mode is Automatic.

To make your own shooting mode suitable for a certain environment, select User defined. In the user defined mode you can adjust Based on mode, Flash, White balance, and Colour tone, and Reset user mode options. To copy the settings of another shooting mode, select Based on mode and the desired shooting mode.

FlashThe camera has an LED fl

Keep a safe distance wheflash on people or animalsflash while taking a pictu

The following flash modeand Off

Scroll to the desired flash

If the flash is set to Off oconditions, the flash still is captured. This allows thwhen the picture is takenresultant picture.

White balanceSelect the appropriate selighting conditions. This acolors more accurately.

Scroll to the desired setti

Colour toneScroll to the desired colo

Last imageTo view the last image ta

12

te. The self-timer indicator ( ) eps when the timer is running. The e after the selected delay has se the Self timerin the sequence pse pictures", on page 12.

era settings, select Options > following:

(1600x1200 resolution), E-mail r MMS (640x480 resolution). The , the more memory the image uses.

whether you want to save the in Gallery. If you select Yes, a list

ns.

ct On if you want to achieve prepared to accept a reduction in may be lower than you have quality setting. If you want to

d have less reduction in resolution,

Select On to see the captured or Off to continue taking pictures

Select Date or Text.



Cam

era Take time-lapse pictures

Select Options > Advanced sequence to set the camera to take several pictures in a sequence automatically. You can set the rate between two frames per second (fast) and one frame every 15 minutes (slow). The number of pictures is limited by the amount of memory available.

The pictures are automatically saved in Gallery.

You can also use the sequence mode with the Self timer. See "You in the picture — self-timer", on page 12.

After taking the pictures, they are shown in a grid on the main display. To view a picture, press to open it.

To return to the sequence mode viewfinder, select Back.

You in the picture — self-timerUse the self-timer to delay the taking of a picture so that you can include yourself in the picture. To set the self-timer delay, select Options > Self timer > 10 seconds, 20 seconds or 30 seconds. To activate the

self-timer, select Activablinks and the device becamera takes the picturelapsed. You can also umode. See "Take time-la

Camera settingsTo change the main camSettings, and from the

Image quality — Print (1024x768 resolution) obetter the image quality

Add to album — Selectimage to a certain albumof available albums ope

Extended zoom — Selemaximum zoom but areimage resolution, whichselected with the Imagelimit the zoom range anselect Off.

Show captured img. —image after it is taken, immediately.

Default image name —


Cam

era

13

elect Options > Apply effect > elect OK. To edit the text, select size text, Rotate text, or Select

itor:ull screen, press . To return to s again.ckwise or counterclockwise,

ut, press and .

good photographs

ure quality. The camera has ngs. Use Print for large prints up x8 inches), E-mailfor e-mail and eters (6x4 inches), or MMS for ge. The better the image quality,

age consumes. The quality of a an that of a nonzoomed picture.

ality, select Options > Settings..


Copyright © 20

Shutter tone — Select the tone you want to hear when you take a picture.

Memory in use — Select where to store your images.

Edit imagesTo edit the picture you have just taken, select Options > Edit. To edit other pictures, select them from Gallery.

Select Options > Apply effect to crop and rotate the image; adjust the color, compression, and resolution; also, to add effects, text, clip art, or a frame to the picture.

To manually crop an image, select Options > Apply effect > Crop > Manual. A rectangle indicating the crop area is displayed. Scroll to define the top left starting point for the crop, and select Set. Scroll to the bottom right of the area to be cropped, and select Crop.

To reduce redness of the eyes in an image, select Options > Apply effect > Red eye reduction. Move the cross onto the eye, and press . A loop appears on the display. Scroll to resize the loop to fit the size of the eye. Press to reduce the redness.

To add clip art to an image, select Options > Apply effect > Clip-art. Select the item you want to add from the list, and press . To move, rotate, and change the size of the item, select Options > Move clip-art, Resize clip-art, or Rotate clip-art.

To add text to an image, sText. Enter the text, and sOptions > Move text, Recolour.

Shortcuts in the image ed• To view an image in f

the normal view, pres• To rotate an image clo

press. and .• To zoom in or zoom o

Tips on taking

Picture qualityUse the appropriate pictthree picture quality settito 25x20 centimeters (10prints up to 15x10 centimuse in a multimedia messathe more memory the imzoomed picture is lower thTo change the picture qu

14

ong side light gives a dramatic o harsh, resulting in too much

of the subject — Harsh sunlight cts to squint their eyes. The too high.ound in situations where there is

oft light available; for example, on udy day or on a sunny day in the

r displayrs

( ) ) here

ngth

e

cator

d.ator (4) indicates the format of the



Cam

era Background

Use a simple background — For portraits and other pictures with people, avoid having your subject in front of a cluttered, complex background that may distract attention from the subject. Move the camera or the subject when these conditions cannot be met. Move the camera closer to the object to take clearer portraits.

DepthWhen taking pictures of landscapes, add depth to your pictures by placing objects in the foreground. However, if the foreground object is too close to the camera, it may be blurred.

Lighting conditionsChanging the source, amount, and direction of light can change photographs dramatically. Here are some typical lighting conditions:• Light source behind the subject — Avoid placing your

subject in front of a strong light source. If the light source is behind the subject or visible in the display, the resulting picture may have weak contrast, may be too dark, and may contain unwanted lighting effects. You can use the flash to add more lighting to shadows. See "Flash", on page 11.

• Sidelit subject — Streffect but may be tocontrast.

• Light source in frontmay cause the subjecontrast may also be

• Optimal lighting — Fplenty of diffused, sa bright, partially closhadow of trees.

Video recordeVideo recorder indicatoshow the following:. • The device memory

and memory card (indicators (1) show wthe video is saved.

• The current video leindicator (2) shows elapsed time and timremaining.

• The microphone indi(3) shows that the microphone is mute

• The file format indicvideo clip.


Cam

era

15

ded, do the following:he video clip you just recorded, .keep the video, select Options >

inder to record a new video,

multimedia, Via e-mail, or Via ared, select Options > Send. For "Messaging", on page 28 and ty", on page 73. This option is not tive call. the other party during an active Send to caller.ct Options > Edit. See also "Edit 9.

tup, press or , or select

se the item to be viewed or he settings available depend on

der, press Cancel or .

default settings when you close


Copyright © 20

Record videosIf the camera is in image mode, to select video mode, select Options > Video mode.

To select the secondary camera (for example, to include yourself in the video), select Options > Use second. cam.. To use the main camera again, select Options > Use main camera.

The zoom indicator, which appears on the side pane, shows the zoom level. Press or to zoom in or zoom out.1 Press to start recording. The record icon is

shown. The LED flash is lit, and a tone sounds, indicating to the subject that video is being recorded. There is no flash effect on the resultant video.

2 To pause recording at any time, select Pause. The pause icon blinks on the display. Video recording automatically stops if recording is set to pause and there are no key presses within a minute.

3 Select Continue to resume recording. 4 Select Stop to stop recording. The video clip is

automatically saved to the Images & videofolder of Gallery. See "Gallery", on page 9.

To select the shooting mode; colour and lighting settings; or view the Last video clip before recording a video, see "Video recorder setup", on page 15.

After a video clip is recor• To immediately play t

select Options > Play• If you do not want to

Delete.• To return to the viewf

press .• To send the video Via

Bluetooth, or Via infrmore information, see"Bluetooth connectiviavailable during an ac

• To send a video clip tocall, select Options >

• To edit the video, selevideo clips", on page 1

Video recorder seIf the viewfinder is activeOptions > Open setup.

Press or to chooadjusted, and press . Twhich camera is in use.

To reactivate the viewfin

The settings return to thethe Camera.

16

ttings for the video recorder: video o settings. To adjust video recorder er setup", on page 15. The video to the default settings after you e video settings remain the same gain. To change the video settings, gs and from the following:

ct On if you want to record both

quality of the video clip to High, ou select High or Normal, the rding is restricted by the available ard, and up to one hour per clip. If eo on a compatible TV or PC, select ch has CIF resolution (352x288) u cannot send video clips saved in ultimedia message. If you want to ible mobile devices, select Normal, on (176x144) and file format .3gp. hrough MMS, or send it through aring (QCIF resolution, file format g (network service)", on page 44. to 300 KB (approximately 20



Cam

era Shooting mode

The settings of each shooting mode have been set to match a certain style or environment.

The following shooting modes are available: Automatic, or Night.

Scroll to the appropriate shooting mode for recording a video, and press .

White balanceSelect the appropriate setting that matches the current lighting conditions. This allows the camera to reproduce colors more accurately.

Scroll to the desired setting and press .

Color toneScroll to the desired color effect setting and press .

Last video clipTo view the last video taken, press .

Video settingsThere are two kinds of serecorder setup and videsetup, see "Video recordrecordersettings return close the camera, but thuntil you change them aselect Options > Settin

Audio recording — Seleimage and sound.

Video quality — Set theNormal, or Sharing. If ylength of the video recospace on your memory cyou want to view the vidHigh video quality, whiand file format .mp4. Yothe .mp4 format in a mview the clip in compatwhich has QCIF resolutiTo send the video clip tvideo sharing, select Sh.3gp). See "Video sharinThe video clip is limited


Cam

era

17


Copyright © 20

seconds in duration) so that it can be conveniently sent as a multimedia message to a compatible device. Some networks, however, may only support sending of multimedia messages with a maximum size of 100 KB. Contact your service provider for more information.

Add to album — Select Yes to save the recorded video clip to a particular album in Gallery.

Show captured video — Select Off to record a video clip immediately after another. Your videos are not played after being recorded, and the video recorder is ready for use again.

Default video name — Select Date or Text as the default name for videos you record.

Memory in use — Choose the default memory store: device memory or memory card.

18

sfer images from your device to a h Nokia Phone Browser available in e the CD-ROM supplied with your

. Videos and Real audio clips open opens in the music player. See clips", on page 19. See "Music

a compatible memory card or to file and Options > Move and y card, Move to memory card, r Move to phone mem..

ory card are indicated with .e memory are indicated with .age files, select Options > Shrink. es that you have already copied to mple, a compatible PC) and ace, in the Images & video folder, s > Free memory.allery in one of the main folders t Graphic downl., Video downl., downl.. The browser opens, and ark from which the site can



Galle

ry GalleryTo store and organize your images, video clips, sound clips, playlists, and streaming links, press , and select Gallery. To open the gallery from the Camera application, select Options > Go to Gallery. From Camera, only the Images & video folder is available.

Tip! To switch from Gallery to Camera, select Options > Go to Camera from the Images & video folder.

Select Images & video, Tracks, Sound clips, Streaming links, Presentations, or All files, and press .

You can browse and open folders, mark, copy, and move items to folders and albums. Real audio clips, video clips, .ram files, and streaming links are opened and played in the RealPlayer application. See "RealPlayer", on page 24. You can also create albums; and mark, copy, and add items to albums. See "Albums", on page 22.

Tip! You can trancompatible PC witNokia PC Suite. Sedevice.

Press to open a filein RealPlyr., and music "View images and videoplayer", on page 58.

To copy or move files todevice memory select acopy > Copy to memorCopy to phone mem., o

Files stored on the memFiles stored in the devicTo reduce the size of imTo reduce the size of filother locations (for exaincrease free memory spselect a file and OptionTo download files into Gusing the browser, selecTrack downl., or Soundyou can select a bookmdownload.


Galle

ry

19

e, select Options > Zoom in or atio is at the top of the display. stored permanently.

allery. See "Gallery", on page 18.

ate custom video clips, scroll to ptions >Edit. You can create bining and trimming video clips, clips, transitions, and effects. cts that you can add to the

video or between the video clips.

n see two timelines: video clip imeline. If you add images, text, lip, they are shown on the video the timelines, press or .

elines, press or .

ps, mark one or more video clips, t.

u can insert video clips to make edit the clips by trimming and dd images and sound clips and d also add text to the clip.

t from the following options:


Copyright © 20

View images and video clipsPictures taken and video clips recorded with the camera are stored in the Images & video folder in Gallery. Images and video clips can also be sent to you in a multimedia message, as an e-mail attachment, or using Bluetooth connectivity. To be able to view a received image or video clip in Gallery or in RealPlyr., you must save it in the device memory or on a compatible memory card.

Open the Images & video folder in Gallery. The images and video clip files are in a loop and ordered by date. To browse individual files, press or . To browse files in groups, press or .

To edit a photo or a video clip, select Options > Edit. An image editor or a video editor opens.

To add an image or a video clip to an album in Gallery, select Options > Albums. > Add to album. See "Albums", on page 22.

To create custom video clips, select a video clip or mark several clips in Gallery, and select Options > Edit. See "Edit video clips", on page 19.

To print your images on a compatible printer connected to your device or to store them on a compatible memory card for printing, select Options > Print. See "Image print", on page 22.

To zoom an opened imagZoom out. The zooming rThe zooming ratio is not

Edit video clipsYou can edit video clips in G

To edit video clips and crea video clip, and select Ocustom video clips by comand adding images, soundTransitions are visual effebeginning and end of the

In the video editor you catimeline and sound clip tor transitions to a video cclip timeline. To move onTo switch between the tim

To create custom video cliand select Options > Edi

In the edit video view, yoa custom video clip, and adding effects. You can achange their duration, an

To modify the video, selec

20

sound clip from the video.

py of

s the .

are s: at e end ns tart ed n of

selected video clip. A thumbnail of in the main view. A thumbnail -black frame of the video clip. The selected video clip is also shown.

ected image. A thumbnail of the ain view.

e video clip. You can insert a title,

selected sound clip. The name and ound clip is shown in the main



Galle

ry Edit video clip:

Cut — Trims the video clip in the cut video clip view.

Add colour effect — Inserts a color effect in the video clip.

Use slow motion — Slows the speed of the video clip.

Mute sound or Unmute sound — Mutes or unmutes the original video clip sound.

Move — Moves the video clip to the selected location on the timeline.

Remove — Removes the video clip from the video.

Duplicate — Makes a copy of the selected video clip.

Edit text (shown only if you have added text) — To move, remove, or duplicate text; change the color and style of the text; define how long it stays on the screen; and add effects to the text.

Edit image (shown only if you have added an image) — To move, remove, or duplicate an image; define how long it stays on the screen; and set a background or a color effect to the image.

Edit sound clip:

Cut — Trims the sound clip in the cut sound clip view.

Move — Moves the sound clip to the selected location on the timeline.

Remove — Removes the

Duplicate — Makes a cothe selected sound clip.

Set duration — Changelength of the sound clip

Edit transition — Therethree types of transitionthe start of a video, at thof a video, and transitiobetween video clips. A stransition can be selectwhen the first transitiothe video is active.

Insert:

Video clip — Inserts thethe video clip is shown consists of the first nonname and length of the

Image — Inserts the selimage is shown in the m

Text — Inserts text to thsubtitle, or credits.

Sound clip — Inserts thelength of the selected sview.


Galle

ry

21

clips in the full screen mode, ow > Start.

(slower) to adjust the display r (previous) to browse the

show in the Images & Video lide show > Settings and from

f

le from the list

ecrease the volume or to

an view SVG (scaleable vector s maintain their appearance ith different screen sizes and

iles, select Presentations folder, ions > Play.


Copyright © 20

New sound clip — Records a new sound clip to the selected location.

Movie — To preview the movie in full screen or as a thumbnail, or save the movie.

Tip! To take a snapshot of a video clip, select Options > Take snapshot in the cut video view.

To save your video, select Options > Movie > Save. To define the Memory in use, select Options > Settings. The default is the device memory.

Tip! In the Settings view, you can define Default video name, Default sc. shot name, Resolution, and Memory in use.

Select Options > Send > Via multimedia, Via e-mail, Via Bluetooth, or Via infrared if you want to send the video. Contact your service provider for details of the maximum multimedia message size that you can send. If your video is too large to be sent in a multimedia message, is displayed.

Tip! If you want to send a video clip that is over the maximum multimedia message size allowed by your service provider, you can send the clip using Bluetooth connectivity. See "Send data", on page 74. You can also transfer your videos using Bluetooth connectivity to a compatible PC, or by using a compatible memory card reader (enhancement).

Slide showTo view images and videoselect Options > Slide sh

Press (faster) or speed. Press (next) othumbnails.

To add sound to the slidefolder, select Options > Sthe following:

Music — Select On, or Of

Track — Select a music fi

Volume — Press to dincrease the volume

PresentationsWith presentations, you cgraphic) files. SVG imagewhen printed or viewed wresolutions. To view SVG fan image, and select Opt

22

es that are in jpg format. The camera are automatically saved in

e data cable to a PictBridge er, and select Pictbridge from the your device before you print.

irst time, a list of available printers lect the image. Select a printer. The ault printer.

PictBridge compatible printer the printer is automatically

not available, a list of available ayed.

rinter, select Options > Settings >



Galle

ry AlbumsWith albums you can conveniently manage your images and video clips. To view the albums list, in the Images & video folder, select Options > Albums > View albums. The albums are ordered alphabetically. To view the content of an album, press .

To create a new album, select Options > New album. Enter a name for the album, and select OK.

To add a picture or a video clip to an album in Gallery, scroll to a picture or video clip, and select Options > Albums. > Add to album. A list of albums opens. Select the album to which you want to add the picture or video clip, and press .

To remove a file from an album, press . The file is not deleted from the Images & video folder in Gallery.

Image printTo print your images using a compatible data cable, Bluetooth connectivity, or your compatible memory card (if available), select the image you want to print, and the print option in Gallery, Camera, image editor, or image viewer.

You can only print imagpictures taken with the .jpg format.

Note: Connect thcompatible printpopup display on

Printer selectionWhen you print for the fis displayed after you seprinter is set as the def

If you have connected ausing the CA-53 cable, displayed.

If the default printer is printing devices is displ

To change the default pDefault printer.


Galle

ry

23


Copyright © 20

Print previewThe print preview view opens only when you start printing an image in the gallery.

The selected images are displayed using predefined layouts. To change the layout, scroll left and right through the available layouts for the selected printer. If the images do not fit on a single page, press or to display the additional pages.

Print settingsThe available options vary, depending on the capabilities of the printing device you selected.

To set a default printer, select Options > Default printer.

To select the paper size, select Paper size, the size of paper from the list, and OK. Select Cancel to return to the previous view.

24

a file saved in Gallery.ge 18.ress to play the file.

o clip in full screen mode, press . nge back to normal screen mode.

s and hold .he media file, press and hold .press and hold until is the sound, press and hold

over the airrequire you to use an Internet ur default access point. Other

you to use a WAP access point.

e configured when you first start

ovider for more information.

r., you can only open an rtsp:// URL r, RealPlyr. recognizes an http link



Med

ia a

pplic

atio

ns Media applicationsRealPlayer

Press , and select Imaging > RealPlyr.. With RealPlyr., you can play video clips, sound clips, and playlists, or stream media files over the air. You can activate a streaming link when you browse Web pages, or store it in the device memory or a compatible memory card (if inserted).

RealPlyr. supports files with extensions such as .3gp, .mp4 or .rm. However, RealPlyr. does not necessarily support all file formats or all the variations of file formats. For example, RealPlyr. attempts to open all .mp4 files, but some .mp4 files may include content that is not compliant with 3GPP standards and, therefore, is not supported by your device.

Play video or sound clips1 To play a media file stored in device memory, or on a

compatible memory card (if inserted), select Options > Open and from the following:Most recent clips — to play one of the last six files played in RealPlyr..

Saved clip — to playSee "Gallery", on pa

2 Scroll to a file, and p

Tip! To view a videPress again to cha

Shortcuts during play:• To fast forward, pres• To rewind through t• To mute the sound,

displayed. To turn onuntil you see .

Stream contentMany service providers access point (IAP) for yoservice providers allow

The access points may byour device.

Contact your service pr

Note: In RealPlyaddress. Howeveto a .ram file.


Med

ia a

pplic

atio

ns

25

ter the IP address of the proxy

ter the port number of the proxy

ers are intermediate servers ers and their users. Some service to provide additional security or browser pages that contain .

croll to the access point you o the Internet, and press

e for RealPlyr. to disconnect ou pause a media clip playing elect User defined, and press select OK.

r the lowest port number of the inimum value is 1024.

r the highest port number of the aximum value is 65535.

ed settings to edit the erent networks.


Copyright © 20

To stream content over the air, select a streaming link saved in Gallery, on a Web page, or received in a text message or multimedia message. Before live content begins streaming, your device connects to the site and starts loading the content. The content is not saved in your device.

Receive RealPlayer settingsYou may receive RealPlyr. settings in a special text message from the network operator or service provider. See "Data and settings", on page 33. For more information, contact your network operator or service provider.

Change the RealPlayer settingsSelect Options > Settings and from the following:

Video — to adjust the contrast of the video, and to have RealPlyr. automatically repeat video clips after they finish playing

Connection — to select whether to use a proxy server, change the default access point, and set the port range used when connecting. Contact your service provider for the correct settings.

Proxy sett.:

Use proxy — To use a proxy server, select Yes

Proxy serv. address — Enserver

Proxy port number — Enserver

Glossary: Proxy servbetween media servproviders use them speed up access to sound or video clips

Netw. sett.:

Default access point — Swant to use to connect t

Online time — Set the timfrom the network when ythrough a network link. S

. Enter the time, and

Lowest UDP port — Enteserver’s port range. The m

Highest UDP port — Enteserver’s port range. The m

Select Options > Advancbandwidth values for diff

26

muveeor main view, select Custom

want to include in your muvee in , or Music.o clips and images, to define the les are played in the muvee, select d options. To select the file you . Then scroll to the file below lace the marked file, and press .s, select Options > Select t content", on page 27.add an opening and closing text to

eate muvee and from the

e — to optimize the length of the dingclude all the selected pictures and vee set the muvee duration to be the music clipefine the length of the muveeve.



Med

ia a

pplic

atio

ns Movie director

To create muvees, press , and select Imaging > Movie. Muvees are short, edited video clips that can contain video, images, music, and text. Quick muvee is created automatically by Movie director after you select the style for the muvee. Movie director uses the default music and text associated with the chosen style. In a Custom muvee you can select your own video and music clips, images and style, and add an opening and closing message. You can send muvees with MMS.

Open Movie, and press or to move between the and views. To return to the main view from the

view, select Done.

The view contains a list of video clips that you can Play, Send, Rename, and Delete.

Create a quick muvee1 In the Movie director main view, select Quick muvee.2 Select a style for the muvee from the style list. The

created muvee is saved in the Movie director muvee list. The muvee is played automatically after saving.

Create a custom1 In the Movie Direct

muvee.2 Select the clips you

Video, Image, StyleAfter you select videorder in which the fiOptions > Advancewant to move, presswhich you want to pTo cut the video clipcontents. See "SelecIn Message you can a muvee.

3 Select Options > Crfollowing:Multimedia messagmuvee for MMS senAuto-select — to invideo clips in the muSame as music — tosame as the chosen User defined — to d

4 Select Options > Sa


Med

ia a

pplic

atio

ns

27


Copyright © 20

To preview the custom muvee before saving it, in the Preview view, select Options > Play.

To create a new custom muvee by using the same style settings, select Options > Recreate.

Select contentTo edit the selected video clips, select Options > Advanced options > Options > Select contents. You can select which parts of the video clip you want to include or exclude in the muvee. In the slider, green is for included, red is for excluded, and grey is for neutral parts.

To include a part of the video clip in the muvee, scroll to the part, and select Options > Include. To exclude a part, select Options > Exclude. To exclude a shot, select Options > Exclude shot.

To let Movie director randomly include or exclude a part or parts of the video clip, scroll to the part, and select Options > Mark as neutral or Mark all as neutral.

SettingsSelect Settings to edit the following options:

Memory in use — Select where to store your muvees.

Resolution — Select the resolution of your muvees.

Default muvee name — Set a default name for the muvees.

28

ssages that have not been sent are

messages that have been sent, t using Bluetooth connectivity or . To change the number of ee "Other settings", on page 40.

s waiting to be sent are .

es are placed in the outbox, for ur device is outside network also schedule e-mail messages to ime you connect to your remote

ervice) — You can request the elivery report of the text messages es you have sent. Receiving a imedia message that has been sent ay not be possible.

ve opened any of the default between the folders, press or



Mes

sagi

ng MessagingPress , and select Messag.. In Messag., you can create, send, receive, view, edit, and organize text messages, multimedia messages, e-mail messages, and special text messages containing data. You can also receive messages and data using Bluetooth connectivity or infrared, receive Services messages, cell broadcast messages, and send service commands.

To create a new message, select New message.

Note: Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device.

Messag. contains the following folders:

Inbox — Received messages, except e-mail and cell broadcast messages, are stored here. E-mail messages are stored in the Mailbox.

My folders — Organize your messages into folders.

Tip! To avoid rewriting messages that you send often, use texts in the templates folder.

Mailbox — Connect to your remote mailbox to retrieve your new e-mail messages or view your previously retrieved e-mail messages offline. See "E-mail", on page 38.

Drafts — Draft mestored here.

Sent — The last 20excluding messages seninfrared, are stored heremessages to be saved, s

Outbox — Messagetemporarily stored here

Example: Messagexample, when yocoverage. You canbe sent the next tmailbox.

Reports (network snetwork to send you a dand multimedia messagdelivery report of a multto an e-mail address m

Tip! When you hafolders, to switch

.


Mes

sagi

ng

29

— ) repeatedly until the ears. There are more characters r key than are printed on the key.ated on the same key as the

l the cursor appears (or press eriod), and enter the letter.s . To move the cursor to the ee times.

putith a single keypress. Predictive

uilt-in dictionary to which you is displayed when you write

input.text input, press , and select is activates predictive text input evice.ord, . ce

kia"

o,


Copyright © 20

To enter and send service requests (also known as USSD commands), such as activation commands for network services, to your service provider, select Options > Service command in the Messag. main view.

Cell broadcast (network service) allows you to receive messages on various topics, such as weather or traffic conditions, from your service provider. For available topics and relevant topic numbers, contact your service provider. In the Messaging main view, select Options > Cell broadcast. In the main view, you can see the status of a topic, a topic number, name, and whether it has been flagged ( ) for follow-up.

Cell broadcast messages cannot be received in UMTS networks. A packet data connection may prevent cell broadcast reception.

Write textABC, abc, and Abc indicate the selected character mode. 123 indicates the number mode.

Traditional text input is displayed when you are writing text using

traditional text input.

• Press a number key (desired character appavailable for a numbe

• If the next letter is locpresent one, wait untito end the time-out p

• To insert a space, presnext line, press thr

Predictive text inYou can enter any letter wtext input is based on a bcan add new words. text using predictive text1 To activate predictive

Predictive text on. Thfor all editors in the d

2 To write the desired wpress the keys —Press each key only onfor one letter. For example, to write "Nowhen the English dictionary is selected,press for N, for

for k, for i, and for a.

30

ute letter mode, press and hold the

etter and number mode, press and

ifferent character modes, press .

ress . To delete more than one ld .

mon punctuation marks, press .

characters, press .

ral special characters at the same en you select each character.

d messagesltimedia message may vary, ing device.

multimedia message or write an he correct connection settings in S and e-mail settings", on page 32 8.

ay limit the size of MMS messages. xceeds this limit, the device may it can be sent by MMS.



Mes

sagi

ng The word suggestion changes after each keypress.3 When you finish writing the word correctly, press

to confirm it, or press to add a space.If the word is not correct, press repeatedly to view the matching words the dictionary has found one by one, or press , and select Predictive text > Matches.If the ? character is shown after the word, the word is not in the dictionary. To add a word to the dictionary, select Spell, enter the word using traditional text input, and select OK. The word is added to the dictionary. When the dictionary is full, a new word replaces the oldest added word.

4 Start writing the next word.

Write compound wordsWrite the first half of a compound word; to confirm it, press . Write the last part of the compound word. To complete the compound word, press to add a space.

Turn predictive text input offTo turn predictive text input off for all editors in the device, press , and select Predictive text > Off.

Tip! To turn predictive text input on or off, quickly press twice.

Tips on text inpTo insert a number in thdesired number key.

To switch between the lhold .

To switch between the d

To delete a character, pcharacter, press and ho

To access the most com

To open a list of special

Tip! To insert sevetime, press wh

Write and senThe appearance of a mudepending on the receiv

Before you can create ae-mail, you must have tplace. See "Receive MMand "E-mail", on page 3

The wireless network mIf the inserted picture emake it smaller so that


Mes

sagi

ng

31

to a multimedia message, select ct > Image, Sound clip, or Video dded, is shown. clips that are saved in the .mp4

a message. To change the format eos are saved, see "Video

or record sound or video for a select Options > Insert new > Video clip. To insert a new slide Slide.media message looks like, select

to an e-mail, select Options > d clip, Video clip, or Note. re indicated by .r file types as attachments, open pplication, and select Options > ail, if available.select Options > Send, or press

ending of text messages beyond ingle message. Longer messages or more messages. Your service rdingly. Characters that use nd characters from some ese, take up more space limiting


Copyright © 20

1 Select New message and one of the following:Text message — to send a text messageMultimedia message — to send a multimedia message (MMS)E-mail — to send an e-mailIf you have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start.

2 In the To field, press to select recipients or groups from contacts, or enter the recipient’s phone number or e-mail address. To add a semicolon (;) that separates the recipients, press . You can also copy and paste the number or address from the clipboard.

3 In the Subject field, enter the subject of a multimedia message or e-mail. To change the fields that are visible, select Options > Address fields.

4 In the message field, write the message. To insert a template, select Options > Insert or Insert object > Template.

5 To add a media objectOptions > Insert objeclip. When sound is aYou cannot send videoformat in a multimediin which recorded vidsettings", on page 16.

6 To take a new picturemultimedia message, Image, Sound clip, orto the message, selectTo see what the multiOptions > Preview.

7 To add an attachmentInsert > Image, SounE-mail attachments a

Tip! To send othethe appropriate aSend > Via e-m

8 To send the message, .

Your device supports the sthe character limit for a sare sent as a series of twoprovider may charge accoaccents or other marks, alanguage options like Chin

32

Messaging > Options > dia message > Access point in oint you created as the preferred "Multimedia messages", on

eive, retrieve, reply to, and forward following:t access point (IAP) correctly. See

ge 82.ettings correctly. If you select ag. main view and have not set up , you are prompted to do so. To mail settings with the mailbox See also "E-mail", on page 38.arate e-mail account. Follow the your remote mailbox and Internet ).

receive messages

indicates an unread text message, dia message, data received

data received through Bluetooth



Mes

sagi

ng the number of characters that can be sent in a single message. In the navigation bar, you can see the message length indicator counting backwards. For example, 10 (2) means that you can still add 10 characters for the text to be sent as two messages.

E-mail messages are automatically placed in Outbox before sending. If sending does not succeed, the e-mail is left in the Outbox with the Failed status.

Tip! You can combine images, video, sound, and text to a presentation and send it in a multimedia message. Start to create a multimedia message, and select Options > Create presentation. The option is shown only if MMS creation mode is set to Guided or Free. See "Multimedia messages", on page 37.

Receive MMS and e-mail settingsYou may receive the settings in a message from your network operator or service provider. See "Data and settings", on page 33.

Enter the MMS settings manually:1 Press , select Tools > Settings > Connection >

Access points, and define the settings for a multimedia messaging access point. See "Connection", on page 82.

2 Press , and selectSettings > Multimeuse and the access pconnection. See alsopage 37.

Before you can send, rece-mail, you must do the• Configure an Interne

"Connection", on pa• Define your e-mail s

Mailbox in the Messyour e-mail accountstart creating the e-guide, select Start. You must have a sepinstructions given byservice provider (ISP

Inbox —

In the Inbox folder, an unread multime

through infrared, and connectivity.


Mes

sagi

ng

33

multimedia presentation, is sentation, select the indicator.

sany kinds of messages that

You may receive settings from rvice provider, or company department in a configuration ings, select Options > Save all.

the information to Contacts, siness card. Certificates or e business card are not saved.

e ringing tone, select Options >

he logo shown in the standby ork operator’s own

ions > Save.

e invitation, select Options >

the bookmark to the bookmarks ions > Add to bookmarks. If the cess point settings and

ata, select Options > Save all.


Copyright © 20

When you receive a message, and 1 new message are shown in the standby mode. To open the message, select Show. To open a message in Inbox, scroll to it, and press .

To reply to a received message, select Options > Reply

To print a text or a multimedia message on a compatible basic print profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print.

Multimedia messagesImportant: Exercise caution when opening messages. Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC.

You may receive a notification that a multimedia message is waiting in the multimedia message center. To start a packet data connection to retrieve the message to your device, select Options > Retrieve.

When you open a multimedia message ( ), you may see an image and a message. is shown if sound is included or if video is included. To play the sound or the video, select the indicator.

To see the media objects that have been included in the multimedia message, select Options > Objects.

If the message includes adisplayed. To play the pre

Data and settingYour device can receive mcontain data ( ):

Configuration message —your network operator, seinformation managementmessage. To save the sett

Business card — To save select Options > Save busound files attached to th

Ringing tone — To save thSave.

Operat. logo — To have tmode instead of the netwidentification, select Opt

Calen. entry — To save thSave to Calendar.

Web message — To save list in Services, select Optmessage contains both acbookmarks, to save the d

34

lbox and retrieve new e-mail elect Yes. When you view e continuously connected to a data connection. See also 2.

ved e-mail messages offline, select ail messages offline, your device is mote mailbox.

messages Options > Connect to start a te mailbox.

ise caution when opening l messages may contain malicious rwise be harmful to your device or

pen connection to a remote ons > Retrieve e-mail and one of

ll new e-mail messagesve only the e-mail messages that

messages from the mailboxessages, select Cancel.



Mes

sagi

ng E-mail notif. — The note tells you how many new e-mails you have in your remote mailbox. An extended notification may list more detailed information.

Service messagesService messages ( ) are notifications (for example, news headlines) and may contain a text message or a link. For availability and subscription, contact your service provider.

Mailbox

If you select Mailbox and have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start. See also "E-mail", on page 38.

When you create a new mailbox, the name you give to the mailbox replaces Mailbox in the Messaging main view. You can have up to six mailboxes.

Open the mailboxWhen you open the mailbox, the device asks if you want to connect to the mailbox (Connect to mailbox?).

To connect to your maiheadings or messages, smessages online, you arremote mailbox using a"Connection", on page 8

To view previously retrieNo. When you view e-mnot connected to the re

Retrieve e-mail If you are offline, selectconnection to the remo

Important: Exercmessages. E-maisoftware or othePC.

1 When you have an omailbox, select Optithe following:New — to retrieve aSelected — to retriehave been markedAll — to retrieve all To stop retrieving m


Mes

sagi

ng

35

sages automaticallymatically, select Options > atic retrieval > Header ed or Only in home net., and en the messages are retrieved.es automatically may increase data traffic.

ssages an e-mail message from the g it in the remote mailbox, In Delete msg. from:, select

mail headings in the remote lete the message content, the ur device. If you want to remove

must first delete the e-mail e mailbox, then make a ice to the remote mailbox again

the device and the remote Delete. In Delete msg. from:,

ail is deleted from your device. on to the remote mailbox, it is m the remote mailbox. If you are


Copyright © 20

2 After you retrieve the e-mail messages, you can continue viewing them online, or select Options > Disconnect to close the connection and view the e-mail messages offline.E-mail status indicators:

The new e-mail (offline or online mode) has not been retrieved to your device.

The new e-mail has been retrieved to your device. The e-mail message has been read, and it has not

been retrieved to your device. The e-mail message has been read. The e-mail heading has been read and the message

content has been deleted from the device.3 To open an e-mail message, press . If the e-mail

message has not been retrieved and you are offline, you are asked if you want to retrieve this message from the mailbox.

To view e-mail attachments, open a message that has the attachment indicator , and select Options > Attachments. If the attachment has a dimmed indicator, it has not been retrieved to the device; select Options > Retrieve.

To print an e-mail message on a compatible basic print profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print.

Retrieve e-mail mesTo retrieve messages autoE-mail settings > Automretrieval > Always enabldefine when and how oftRetrieving e-mail messagyour call costs due to the

Delete e-mail meTo delete the contents ofdevice while still retaininselect Options > Delete. Phone only.

The device mirrors the e-mailbox. Although you dee-mail heading stays in yothe heading as well, you message from your remotconnection from your devto update the status.

To delete an e-mail from mailbox, select Options >select Phone and server.

If you are offline, the e-mDuring the next connectiautomatically deleted fro

36

tingsith Must be defined or with a red

ructions given by your service obtain settings from your service ion message.

ters or access points may be preset service provider or network ot be able to change, create, edit,

ssag. > Options > Settings > Text following:

w a list of all text message centers .

lect which message center is used s.

To use character conversion to m when available, select Reduced

t whether the network sends messages (network service).



Mes

sagi

ng using the POP3 protocol, messages marked to be deleted are removed only after you have closed the connection to the remote mailbox.

To cancel deleting an e-mail from the device and server, scroll to an e-mail that has been marked to be deleted during the next connection ( ), and select Options > Undelete.

Disconnect from the mailboxWhen you are online, to end the data connection to the remote mailbox, select Options > Disconnect.

View messages on a SIM cardBefore you can view SIM messages, you must copy them to a folder in your device.1 In the Messag. main view, select Options > SIM

messages.2 Select Options > Mark/Unmark > Mark or Mark all

to mark messages.3 Select Options > Copy. A list of folders opens.4 To start copying, select a folder and OK. To view the

messages, open the folder.

Messaging setFill in all fields marked wasterisk. Follow the instprovider. You may also provider in a configurat

Some or all message cenfor your device by your operator, and you may nor remove them.

Text messagesPress , and select Memessage and from the

Message centres — Viethat have been defined

Msg. centre in use — Seto deliver text message

Character encoding — another encoding systesupport.

Receive report — Selecdelivery reports on your


Mes

sagi

ng

37

g messages that may not be

lect which access point is used on for the multimedia message

elect how you want to receive receive multimedia messages

e network, select Auto. in our home network, you receive a multimedia message that you edia message center.

ur home network, sending and sages may cost you more.

retrieval > Always automatic, makes an active packet data

e message both in and outside

ect whether you want to reject ous sender.

whether you want to receive rtisements.

whether you want the status of own in the log (network service). rt of a multimedia message that il address may not be possible.


Copyright © 20

Message validity — Select how long the message center resends your message if the first attempt fails (network service). If the recipient cannot be reached within the validity period, the message is deleted from the message center.

Message sent as — Change this option only if you are sure that your message center is able to convert text messages into these other formats. Contact your network operator.

Preferred conn. — Select the connection used for sending text messages: GSM network or packet data, if supported by the network. See "Connection", on page 82.

Reply via same ctr. — Select whether you want the reply message to be sent using the same text message center number (network service).

Multimedia messagesPress , and select Messag. > Options > Settings > Multimedia message and from the following:

Image size — Define the size of the image in a multimedia message: Original (shown only when the MMS creation mode is set to Guided or Free), Small, or Large.

MMS creation mode — If you select Guided, the device informs you if you try to send a message that may not be supported by the recipient. Select Restricted; the device

prevents you from sendinsupported.

Access point in use — Seas the preferred connecticenter.

Multimedia retrieval — Smultimedia messages. Toautomatically in your homhome network. Outside ynotification that there is can retrieve in the multim

When you are outside yoreceiving multimedia mes

If you select Multimediayour device automaticallyconnection to retrieve thyour home network.

Allow anon. msgs. — Selmessages from an anonym

Receive adverts — Definemultimedia message adve

Receive report — Select the sent message to be shReceiving a delivery repohas been sent to an e-ma

38

password. If you leave this field for the password when you try to mailbox.

Enter the IP address or host name eceives your e-mail.

Select an Internet access point , on page 82.

a name for the mailbox.

s the e-mail protocol that your provider recommends. The options his setting can be selected only nged if you have saved or exited gs. If you use the POP3 protocol, t updated automatically when you test e-mail messages, you must new connection to your mailbox.

ct the security option used to o the remote mailbox.

r the connection.

POP3 only) — Use with the POP3 sending of passwords to the hile connecting to the mailbox.

the e-mail you send, select rom the following:



Mes

sagi

ng Deny report sending — Select whether you want to deny your device sending delivery reports of received multimedia messages.

Message validity — Select how long the message center resends your message if the first attempt fails (network service). If the recipient cannot be reached within the validity period, the message is deleted from the message center.

E-mailPress , and select Messag. > Options > Settings > E-mail and from the following:

Mailboxes — Select a mailbox to change Connection settings, User settings, Retrieval settings, and Automatic retrieval.

Mailbox in use — Select which mailbox you want to use for sending e-mail.

To create a new mailbox, select Options > New mailbox in the mailbox main view.

Connection settingsTo edit the settings for the e-mail you receive, select Incoming e-mail and from the following:

User name — Enter your user name, given to you by your service provider.

Password — Enter your blank, you are promptedconnect to your remote

Incoming mail serv. — of the mail server that r

Access point in use — (IAP). See "Connection"

Mailbox name — Enter

Mailbox type — Defineremote mailbox service are POP3 and IMAP4. Tonce and cannot be chafrom the mailbox settine-mail messages are noare online. To see the ladisconnect and make a

Security (ports) — Selesecure the connection t

Port — Define a port fo

APOP secure login (forprotocol to encrypt theremote e-mail server w

To edit the settings for Outgoing e-mail and f


Mes

sagi

ng

39

ect whether you want to receive s, a tone and a note, when new ilbox.

t another encoding according to

ine which parts of the e-mail are ize limit, Messages (for IMAP4

s..

ne how many new e-mail the mailbox.

MAP4 only) — Define the folder scribed.

IMAP4 only) — Subscribe to te mailbox and retrieve content

elect whether you want to n new e-mail is received in your

automatic header retrieval ame time.


Copyright © 20

My e-mail address — Enter the e-mail address given to you by your service provider. Replies to your messages are sent to this address.

Outgoing mail serv. — Enter the IP address or host name of the mail server that sends your e-mail. You may only be able to use the outgoing server of your network operator. Contact your service provider for more information.

Access point in use — Select an Internet access point (IAP). See "Connection", on page 82.

The settings for User name, Password, Security (ports), and Port are similar to the ones in Incoming e-mail.

User settingsMy name — Enter your own name. Your name replaces your e-mail address in the recipient’s device when the recipient’s device supports this function.

Send message — Define how e-mail is sent from your device. Select Immediately for the device to connect to the mailbox when you select Send message. If you select During next conn., e-mail is sent when the connection to the remote mailbox is available.

Send copy to self — Select whether you want to save a copy of the e-mail to your remote mailbox and to the address defined in My e-mail address.

Include signature — Select whether you want to attach a signature to your e-mail messages.

New e-mail alerts — Selthe new e-mail indicationmail is received to the ma

Default encoding — Seleclanguage.

Retrieval settingsE-mail to retrieve — Defretrieved: Headers only, Sonly), or Msgs. & attach

Retrieval amount — Defimessages are retrieved to

IMAP4 folder path (for Ipath for folders to be sub

Folder subscriptions (forother folders in the remofrom those folders.

Automatic retrievalE-mail notifications — Sreceive notifications wheremote mailbox.

E-mail notifications and cannot be active at the s

40

ct whether the device for new topic numbers, and saves ut a name to the topic list.

ssaging > Options > Settings > lowing:

Select whether you want to save a es, multimedia messages, or e-mail nt folder.

efine how many sent messages are r at a time. The default limit is 20 it is reached, the oldest message is

ompatible memory card is inserted memory where you want to save emory or Memory card.



Mes

sagi

ng Header retrieval — Select whether you want the device to retrieve new e-mail automatically. You can define when, and how often, the messages are retrieved.

Retrieving e-mail messages automatically may increase your call costs due to the data traffic.

Service messagesPress , and select Messaging > Options > Settings > Service message. Select whether you want to receive service messages. If you want to set the device to automatically activate the browser and start a network connection to retrieve content when you receive a service message, select Download messages > Automatically.

Cell broadcastCheck the available topics and related topic numbers with your service provider. Press , and select Messaging > Options > Settings > Cell broadcast and from the following:

Reception — Select whether you want to receive cell broadcast messages.

Language — Select the languages in which you want to receive messages: All, Selected, or Other.

Topic detection — Seleautomatically searches the new numbers witho

Other settingsPress , and select MeOther and from the fol

Save sent messages — copy of the text messagthat you send to the Se

No. of saved msgs. — Dsaved to the Sent foldemessages. When the limdeleted.

Memory in use — If a cin the device, select theyour messages: Phone m


Mak

e ca

lls

41

cts from your SIM card to make a call this way. See "Copy

x (network service), press and ode. See also "Call divert", on

phone number of your voice nd select Tools > Voic. mail > number. Enter the number service provider), and select OK.

umber in the standby mode, umber you want, and press

ce callt participant.her participant, select Options > e phone number. The first call is hold.answered, to join the first ference call, select Options >


Copyright © 20

Make callsVoice calls

Tip! To increase or decrease the volume during a call, press or . If you have set the volume to Mute, you cannot adjust the volume with the or keys.

To adjust the volume, select Unmute, and press or .

1 In the standby mode, enter the phone number, including the area code. To remove a number, press . For international calls, press twice for the + character (replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and phone number.

2 Press to call the number.3 Press to end the call (or to cancel the call attempt).

Pressing always ends a call, even if another application is active. To end a call if the cover is open, and a compatible headset is not connected, close the cover.

To make a call from Contacts, press , and select Contacts. Scroll to the desired name, or enter the first letters of the name to the search field. Matching contacts are listed. To call, press . Select the call type Voice call.

You must copy the contaContacts before you can contacts", on page 52.

To call your voice mailbohold in the standby mpage 88.

Tip! To change the mailbox, press , aOptions > Change (obtained from your

To call a recently dialed npress . Scroll to the nto call the number.

Make a conferen1 Make a call to the firs2 To make a call to anot

New call and enter thautomatically put on

3 When the new call is participant in the conConference.

42

ode, press the speed dial key and

hanced voice commands. nds are not dependent on the ser does not record voice tags in vice creates a voice tag for the

compares the spoken voice tag to in the device adapts to the main

e the voice commands better.

ct is the name or nickname that is rd. To listen to the synthesized ct card, and select Options > Play

voice tage tags may be difficult in a noisy uring an emergency, so you should n voice dialing in all circumstances.

ling, the loudspeaker is in use. rt distance away when you say the

, press and hold the voice key. If patible headset with the headset e headset key to start voice dialing.



Mak

e ca

lls To add a new person to the call, select Options > New call and enter the phone number. Select Options > Conference > Add to conference. Your device supports conference calls between a maximum of six participants, including yourself.To have a private conversation with one of the participants, select Options > Conference > Private. Select a participant, and select Private. The conference call is put on hold on your device. The other participants can still continue the conference call. Once you have finished the private conversation, select Options > Conference > Add to conference to return to the conference call.To drop a participant, select Options > Conference > Drop participant, scroll to the participant, and select Drop.

4 To end the active conference call, press .

Speed dial a phone numberTo activate speed dialing, press , and select Tools > Settings > Call > Speed dialling > On.

To assign a phone number to one of the speed dialing keys ( — ), press , and select Tools > Spd. dial. Scroll to the key to which you want to assign the phone number, and select Options > Assign. is reserved for the voice mailbox.

To call in the standby m.

Voice dialingYour device supports enEnhanced voice commaspeaker’s voice, so the uadvance. Instead, the deentries in contacts, andit. The voice recognitionuser’s voice to recogniz

The voice tag for a contasaved on the contact cavoice tag, open a contavoice tag.

Make a call with aNote: Using voicenvironment or dnot rely solely upo

When you use voice diaHold the device at a shovoice tag.1 To start voice dialing

you are using a comkey, press and hold th


Mak

e ca

lls

43

rties. The video call can be made evice or ISDN client. Video calls ere is another voice, video, or

video (the recipient is not ork is not transmitting it).

eo sending from your device. To , see "Call settings", on page 81.pen hone y cts

>

fter

ake a ll is not successful (for example, rted by the network, or the mpatible), you are asked if you or send a text message instead.


Copyright © 20

2 A short tone is played, and Speak now is displayed. Say clearly the name or nickname that is saved on the contact card.

3 The device plays a synthesized voice tag for the recognized contact in the selected device language, and displays the name and number. After a timeout of 1.5 seconds, the device dials the number.If the recognized contact was not correct, select Next to view a list of other matches or Quit to cancel voice dialing.

If several numbers are saved under the name, the device selects the default number, if it has been set. Otherwise, the device selects the first available number of the following: Mobile, Mobile (home), Mobile (business), Telephone, Tel. (home), and Tel. (business).

Video calls (network service)When you make a video call, you can see a real-time, two-way video between you and the recipient of the call. The live video image, or video image captured by the camera in your device is shown to the video call recipient.

To be able to make a video call, you must have a USIM card and be in the coverage of a UMTS network. For availability of and subscription to video call services, contact your network operator or service provider. A video call can only

be made between two pato a compatible mobile dcannot be made while thdata call active.

Icons: You are not receiving

sending video or the netw You have denied vid

send a still image instead1 To start a video call, o

the cover, enter the pnumber in the standbmode, or select Contaand a contact.

2 Select Options > CallVideo call.

3 Activate the camera athe call recipient has answered the call.

Starting a video call may twhile. Waiting for videoimage is shown. If the cavideo calls are not supporeceiving device is not cowant to try a normal call

44

(network service)nd live video or a video clip from

nother compatible mobile device ly invite a recipient to view the live want to share. Sharing begins recipient accepts the invitation, rrect mode. See "Share video", on

quirements requires a UMTS connection, your ring depends on 3G network r service provider for questions

ity and fees associated with using Video sharing you must do the

ice is set up for person-to-person ttings", on page 45.active UMTS connection and are k coverage. See "Settings", on page aring session while you are within

rage and a handover to GSM ession is discontinued, but your

.



Mak

e ca

lls The video call is active when you see two video images and hear the sound through the loudspeaker. The call recipient may deny video sending ( ), in which case you hear the sound and may see a still image or a grey background graphic.

Tip! To increase or decrease the volume during a call, scroll left or right.

To change between showing video or hearing only sound, select Enable or Disable > Sending video, Sending audio or Sending audio & video.

To send live video image of yourself, select Use second. cam. to switch on the secondary camera. To show the other party the view visible from the back camera, select Use main camera.

To zoom your own image, select Zoom in or Zoom out. The zoom indicator is shown on the top of the display.

To switch the places of the sent video images on the display, select Change image order.

Note: Even if you have denied video sending during a video call, the call is charged as a video call. Check the pricing with your network operator or service provider.

To end the video call, press .

Video sharingUse Video sharing to seyour mobile device to aduring a voice call. Simpvideo or a video clip youautomatically when theand you activate the copage 45.

Video sharing reBecause Video sharingability to use Video shaavailability. Contact youabout network availabilthis application. To use following:• Ensure that your dev

connections. See "Se• Ensure you have an

within UMTS networ45. If you start the shUMTS network coveoccurs, the sharing svoice call continues


Mak

e ca

lls

45

dress in the following format: me (you can use an IP address

e).

gs

nection, do the following:rovider to establish an use the UMTS network.e UMTS access point connection d properly. For help, see 82.

on, the recipient must install ure the required settings on their e recipient must both be

before you can start sharing.

s, you must be registered to the TS connection, and be within

ge.

ctive, select Options > Share

nvitation to the SIP address you tact card of the recipient.


Copyright © 20

• Ensure that both the sender and recipient are registered to the UMTS network. If you invite someone to a sharing session and that person has their device turned off, or that person is not within UMTS network coverage, they do not know that you are sending an invitation. However, you receive an error message that the recipient cannot accept the invitation.

SettingsPerson-to-person connection settings

A person-to-person connection is also known as a session initiation protocol (SIP) connection. The SIP profile settings must be configured in your device before you can use Video sharing. Setting up a SIP profile allows you to establish a live person-to-person connection to another compatible device. The SIP profile must also be established to receive a sharing session.

Ask your network operator or service provider for the SIP profile settings, and save them in your device. Your network operator or service provider may send you the settings over the air.

If you know a recipient’s SIP address, you can enter it on your contact card for that person. Select Contacts from the main menu, and open the contact card (or start a new card for that person). Select Options > Add detail > Web

address. Enter the SIP adsip:username@domainnainstead of a domain nam

UMTS connection settin

To set up your UMTS con• Contact your service p

agreement for you to • Ensure that your devic

settings are configure"Connection", on page

Share videoTo receive a sharing sessiVideo sharing and configmobile device. You and thregistered to the service

To receive share invitationservice, have an active UMthe UMTS network covera

Live video1 When a voice call is a

video > Live.2 The device sends the i

have added to the con

46

has several SIP addresses in the the SIP address to which you want n, and Select to send the

the recipient is not available, enter OK to send the invitation.matically when the recipient n.

se the sharing session. Select to resume sharing.ssion, select Stop. To end the voice

tionou a share invitation, an invitation owing the sender’s name or SIP s not set to Silent, it rings when n.

share invitation and you are not overage, you will not know that on.

vitation, select from the following: sharing session. If the sender ideo, activate the camera.



Mak

e ca

lls If the recipient has several SIP addresses in the contact card, select the SIP address to which you want to send the invitation, and Select to send the invitation. If the SIP address of the recipient is not available, enter a SIP address. Select OK to send the invitation.

3 Sharing begins automatically when the recipient accepts the invitation.The loudspeaker is active. You can also use a compatible headset to continue your voice call while you share live video.

4 Select Pause to pause the sharing session. Select Continue to resume sharing.

5 To end the sharing session, select Stop. To end the voice call, press .

Video clip1 When a voice call is active, select Options > Share

video > Clip.A list of video clips opens.

2 Select a video clip you want to share. A preview view opens. To preview the clip, select Options > Play.

3 Select Options > Invite.You may need to convert the video clip into a suitable format to be able to share it. Clip must be converted for sharing. Continue? appears. Select OK.The device sends the invitation to the SIP address you have added to the contact card of the recipient.

In case the recipientcontact card, select to send the invitatioinvitation.If the SIP address of a SIP address. Select

4 Sharing begins autoaccepts the invitatio

5 Select Pause to pauOptions > Continue

6 To end the sharing secall, press .

Accept an invitaWhen someone sends ymessage is displayed shaddress. If your device iyou receive an invitatio

If someone sends you awithin UMTS network cyou received an invitati

When you receive an in• Accept to begin the

wants to share live v


Mak

e ca

lls

47

ing call, you can also send a text rming why you cannot answer Send text message. You can ng it. To set up this option and ssage, see "Call settings", on

during a video call, the video ing is not available during a

a video call, is displayed.he video call. Allow video image is shown.image being captured by the is shown to the caller. If you ng, video sending is not ar a sound. A grey screen is video. To replace this grey screen "Call settings", on page 81.press .

work service)ile you have another call in ated Call waiting in Tools > iting.


Copyright © 20

• Reject to decline the invitation. The sender receives a message that you rejected the invitation. You can also press to decline the sharing session and disconnect the voice call.

To end the sharing session, select Stop. If you share a video clip, select Exit. Video sharing ended is displayed.

Answer or reject a callTo answer the call if the cover is open, press . If the cover is closed, open the cover, and the call will be answered automatically. See "Cover display settings", on page 81.

To mute the ringing tone when a call comes in, select Silence. If the cover is closed, press the cover key to select Silence.

Tip! If a compatible headset is connected to the device, to answer and end a call, press the headset key.

If the cover is open, and you do not want to answer a call, press or close the cover to reject it, if a compatible headset is not connected. If the cover is closed, press the cover key once to silence the ringing, and again to reject the call. The caller hears a line busy tone. If you have activated the Call divert > If busy function to divert calls, rejecting an incoming call also diverts the call. See "Call divert", on page 88.

When you reject an incommessage to the caller infothe call. Select Options >edit the text before sendiwrite a standard text mepage 81.

If you answer a voice callcall is dropped. Call waitvideo call.

Answer or reject When a video call arrives1 Press to answer t

to be sent to caller? If you select Yes, the camera in your deviceselect No, or do nothiactivated, and you heshown in place of the with a still image, see

2 To end the video call,

Call waiting (netYou can answer a call whprogress if you have activSettings > Call > Call wa

48

etworks only) — To send an image ia message to the other participant the message and change the . Press to send the file to a ork service).

DTMF tone strings, for example, a F string or search for it in

it character (w) or a pause epeatedly. Select OK to send the

DTMF tones to the Phone number a contact card.

ctivate loudsp., you can close the e the call.

a video call video call for the following ble, Activate handset (if a h Bluetooth connectivity is dsp., or Activate handsfree (fold a compatible headset with is attached), End active call, oom in/Zoom out, and Help.



Mak

e ca

lls Tip! To change the device tones for different environments and events (for example, when you want your device to be silent), see "Profiles — set tones", on page 70.

To answer the waiting call, press . The first call is put on hold.

To switch between the two calls, select Swap. To connect an incoming call or a call on hold with an active call and to disconnect yourself from the calls, select Options > Transfer. To end the active call, press . To end both calls, select Options > End all calls.

Options during a voice callMany of the options that you can use during a voice call are network services. Select Options during a call for some of the following options: Mute or Unmute, Answer, Reject, Swap, Hold or Unhold, Activate handset, Activate loudsp., or Activate handsfree (if a compatible headset with Bluetooth connectivity is attached), End active call or End all calls, New call, Conference, and Transfer. Select from the following:

Replace — To end an active call and replace it by answering the waiting call.

Send MMS (in UMTS nor a video in a multimedof the call. You can editrecipient before sendingcompatible device (netw

Send DTMF — To send password. Enter the DTMContacts. To enter a wacharacter (p), press rtone.

Tip! You can add or DTMF fields in

Tip! If you select Acover and continu

Options during Select Options during aoptions: Enable or Disacompatible headset witattached), Activate louopen mode only, and if Bluetooth connectivity Change image order, Z


Mak

e ca

lls

49

all duration while a call is active, ptions > Settings > Show call

ime invoiced for calls by your ay vary, depending on network off for billing, and so forth.

ers, select Options > Clear the lock code, see "Security", on SIM", on page 85.

ata sent and received during press , and select My own > xample, you may be charged for ions by the amount of data sent

unication events

ion events


Copyright © 20

Log

Recent calls To monitor the phone numbers of missed, received, and dialed calls, press , and select My own > Log > Recent calls. The device registers missed and received calls only if the network supports these functions, the device is switched on, and has network coverage.

Tip! When you see a note in the standby mode about missed calls, select Show to access the list of missed calls. To call back, scroll to a name or number, and press .

To clear all recent call lists, select Options > Clear recent calls in the recent calls main view. To clear one of the call registers, open the register you want to erase, and select Options > Clear list. To clear an individual event, open a register, scroll to the event, and press .

Call duration To monitor the approximate duration of your incoming and outgoing calls, press , and select My own > Log > Call duration.

To set the display of the cselect My own > Log > Oduration > Yes or No.

Note: The actual tservice provider mfeatures, rounding

To clear call duration timtimers. For this you need page 85 and "Phone and

Packet dataTo check the amount of dpacket data connections,Log > Packet data. For eyour packet data connectand received.

Monitor all commIcons in Log:

Incoming Outgoing Missed communicat

50

Options > Filter and a filter.

f the log, recent calls register, and rts permanently, select Options > confirm. To remove a single event

, select Options > Settings > Log s remain in the device memory for ter which they are automatically If you select No log, all the log gister, and messaging delivery deleted.

communication event, in the o an event, and press .

view, to copy a phone number to paste it to a text message, select umber.

d connection timer: To view how kilobytes, is transferred and how ta connection lasts, scroll to an

vent indicated by Pack., and select .



Mak

e ca

lls To monitor all voice and video calls, text messages, or data connections registered by the device, press , select My own > Log, and press to open the general log. For each communication event, you can see the sender or recipient name, phone number, name of the service provider, or access point. You can filter the general log to view just one type of event and create new contact cards based on the log information.

Tip! To see the duration of a voice call on the main display during an active call, select Options > Settings > Show call duration > Yes.

Tip! To view a list of sent messages, press , and select Messaging > Sent.

Subevents, such as a text message sent in more than one part and packet data connections, are logged as one communication event. Connections to your mailbox, multimedia messaging center, or Web pages are shown as packet data connections.

To filter the log, select

To erase the contents omessaging delivery repoClear log. Select Yes tofrom the log, press .

To set the Log durationduration. The log eventa set number of days aferased to free memory. contents, recent calls rereports are permanently

To view the details of ageneral log view scroll t

Tip! In the detailsthe clipboard andOptions > Copy N

Packet data counter anmuch data, measured inlong a certain packet daincoming or outgoing eOptions > View details


Cont

acts

(ph

oneb

ook)

51

t contact cards, use Nokia ilable in Nokia PC Suite.

ail image to a contact card, open ct Options > Edit > Options > bnail image is shown when the

a quick way to call frequently can assign speed dialing keys to rs. See "Speed dial a phone 2.

information, select the card you t Options > Send > Via text media, Via Bluetooth, or Via aging", on page 28 and "Send

up, select Options > Add to have created a group). See

on page 53.

ntacts, groups, and the available ct Options > Contacts info.


Copyright © 20

Contacts (phonebook)Press , and select Contacts. In Contacts you can add a personal ringing tone or a thumbnail image to a contact card. You can also create contact groups, that allow you to send text messages or e-mail to many recipients at the same time. You can add received contact information (business cards) to contacts. See "Data and settings", on page 33. Contact information can only be sent to or received from compatible devices.

Save names and numbers1 Select Options > New contact.2 Fill in the fields that you want, and select Done.

To edit contact cards in Contacts, scroll to the contact card you want to edit, and select Options > Edit.

Tip! To print contact cards on a compatible basic print profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print.

To delete a contact card in Contacts, select a card, and press . To delete several contact cards at the same time, press and to mark the contacts, and press to delete.

Tip! To add and ediContacts Editor ava

To attach a small thumbnthe contact card, and seleAdd thumbnail. The thumcontact calls.

Tip! Speed dialing isused numbers. You eight phone numbenumber", on page 4

Tip! To send contactwant to send. Selecmessage, Via multiinfrared. See "Messdata", on page 74.

To add a contact to a grogroup: (shown only if you"Create contact groups",

To view the amount of comemory in Contacts, sele

52

hronize your contacts to a h Nokia PC Suite.

nd servicesmation on using SIM card services, endor. This may be the service tor, or other vendor.

ntacts > Options > SIM ry to see the names and numbers

In the SIM directory you can add, contacts, and you can make calls.

dialing numbers, select Options > ialling contacts. This setting is by your SIM card.

ur device to selected phone s > Activ. fixed dialling. To add ed dialing list, select Options > need the PIN2 code for these

lling, packet data connections are en sending text messages over a . In this case, the message center nt’s phone number must be ialing list.



Cont

acts

(ph

oneb

ook) Default numbers and addresses

You can assign default numbers or addresses to a contact card. In this way if a contact has several numbers or addresses, you can easily call or send a message to the contact to a certain number or address. The default number is also used in voice dialing.1 In Contacts, select a contact, and press .2 Select Options > Defaults.3 Select a default to which you want to add a number or

an address, and select Assign.4 Select a number or an address you want to set as a

default.

The default number or address is underlined in the contact card.

Copy contactsTo copy names and numbers from a SIM card to your device, press , and select Contacts > Options > SIM contacts > SIM directory. Select the names you want to copy and Options > Copy to Contacts.

To copy contacts to your SIM card, press , and select Contacts. Select the names you want to copy and Options > Copy to SIM direct.; or select Options > Copy > To SIM directory. Only the contact card fields supported by your SIM card are copied.

Tip! You can synccompatible PC wit

SIM directory aFor availability and inforcontact your SIM card vprovider, network opera

Press , and select Cocontacts > SIM directostored on the SIM card.edit, or copy numbers to

To view the list of fixedSIM contacts > Fixed donly shown if supported

To restrict calls from yonumbers, select Optionnew numbers to the fixNew SIM contact. Youfunctions.

When you use Fixed dianot possible, except whpacket data connectionnumber and the recipieincluded on the fixed d


Cont

acts

(ph

oneb

ook)

53

d press to mark it. To add time, repeat this action on all

t to add.contacts to the group.

t Options > Rename, enter the .

from a groupn the group you want to modify.and select Options > Remove

the contact from the group.ich groups a contact belongs, , and select Options > Belongs


Copyright © 20

When fixed dialing is activated, calls may be possible to the official emergency number programmed into your device.

Add ringing tones for contactsWhen a contact or group member calls you, the device plays the chosen ringing tone (if the caller’s phone number is sent with the call and your device recognizes it).1 Press to open a contact card or go to the groups

list, and select a contact group.2 Select Options > Ringing tone. A list of ringing tones

opens.3 Select the ringing tone you want to use for the

individual contact or the selected group.

Create contact groups1 In Contacts, press to open the groups list.2 Select Options > New group. 3 Write a name for the group or use the default name

Group (where is the number of the group), and select OK.

4 Open the group, and select Options > Add members.

5 Scroll to a contact, anmultiple members at athe contacts you wan

6 Select OK to add the

To rename a group, selecnew name, and select OK

Remove members1 In the groups list, ope2 Scroll to the contact,

from group.3 Select Yes to remove

Tip! To check to whscroll to the contactto groups.

54

lyls > Settings > Connection > define the settings for an access tructions given to you by your "Connection", on page 82. Services > Options > Bookmark kmark. Write a name for the

ddress of the page defined for the .ccess point as the default access s > Settings > Access point.

ewens when you open Services.

me bookmarks loaded for sites not okia does not warrant or endorse e to access them, you should take r security or content as you would

ng page defined for the default



Serv

ices Services

Various service providers maintain pages specifically designed for mobile devices. These pages use the wireless markup language (WML), extensible hypertext markup language (XHTML), or hypertext markup language (HTML).

Check the availability of services, pricing, and fees with your network operator or service provider. Service providers will also give you instructions on how to use their services.

Press , and select Services.

Shortcut: To start a connection, press and hold in the standby mode.

Services access pointTo access pages, you need service settings for the page that you want to use. You may receive the settings in a special text message from the network operator or service provider that offers the Web page. See "Data and settings", on page 33. For more information, contact your network operator or service provider.

Tip! Settings may be available on the Web site of a network operator or service provider.

Enter settings manual1 Press , select Too

Access points, and point. Follow the insservice provider. See

2 Press , and selectmanager > Add boobookmark and the acurrent access point

3 To set the created apoint, select Option

Bookmarks viThe bookmarks view op

Your device may have soaffiliated with Nokia. Nthese sites. If you choosthe same precautions fowith any Internet site.

indicates the startiaccess point.


Serv

ices

55

e while browsing, select Back. If ct Options > Navigation miniatures of pages visited (or

ring a browsing session.

tent from the server, select tions > Reload.

t Options > Save as bookmark.

ookmarks view while browsing, To return to the browser view, ck to page.

sing, select Options > e page (this option may not be ages to the device memory or a

(if inserted), and browse them e pages later, press in the

the Saved pages view.

ss, select Options > Navigation ress.

at cannot be shown on the ging tones, images, operator lips. To download an item, scroll .

d, a list of ongoing, paused, and m the current browsing session list, select Options > Tools >


Copyright © 20

Connection securityIf the security indicator is displayed during a connection, the data transmission between the device and the Internet gateway or server is encrypted.

The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server.

Select Options > Details > Security to view details about the connection, encryption status, and information about server and user authentication.

Security certificates may be required for some services, such as banking services. For more information, contact your service provider. See also "Certif. management", on page 86.

BrowseImportant: Use only services that you trust and that offer adequate security and protection against harmful software.

To download a page, select a bookmark, or enter the address in the field ( ).

To open links and make selections, press .

To go to the previous pagBack is not available, seleoptions > History to viewa list of pages visited) du

To retrieve the latest conOptions > Navigation op

To save a bookmark, selec

Tip! To access the bpress and hold .select Options > Ba

To save a page while browAdvanced options > Savavailable). You can save pcompatible memory cardwhen offline. To access thbookmarks view to open

To enter a new URL addreoptions > Go to web add

You can download files thbrowser page, such as rinlogos, themes, and video cto the link, and press

When you start a downloacompleted downloads frois displayed. To view the

56

tionnd view the browser page offline, ced options > Disconnect. To end e the browser, select Options >

eces you have accessed are stored in e device.

cation that is used to store data tried to access or have accessed n requiring passwords, empty the e information or services you have he cache. To empty the cache, ced options > Clear cache.

gsgs and from the following:

the default access point. See 2. Some or all access points may

e by your service provider or ou may not be able to change,

them.



Serv

ices Downloads. In the list, scroll to an item, and select

Options to pause, resume, or cancel ongoing downloads, or open, save, or delete completed downloads.

Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.

Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software.

Download and purchase itemsYou can download items such as ringing tones, images, operator logos, themes, and video clips. These items can be provided free, or you can purchase them. Downloaded items are handled by the respective applications in your device. For example, a downloaded photo can be saved in Gallery.


1 To download the item, scroll to the link, and press .2 Select the appropriate option to purchase the item.3 Carefully read all the information provided.

To continue the download, select Accept. To cancel the download, select Cancel.

End a connecTo end the connection aselect Options > Advanthe connection and closExit.

Empty the cachThe information or servithe cache memory of th

A cache is a memory lotemporarily. If you haveconfidential informatiocache after each use. Thaccessed are stored in tselect Options > Advan

Services settinSelect Options > Settin

Access point — Change"Connection", on page 8be preset for your devicnetwork operator, and ycreate, edit, or remove


Serv

ices

57

e browser to play sounds , select a volume level.

the page layout shown as en in Small screen mode, select want external cascading style , select By speed.

ble the receiving and sending of

ble or disable the use of scripts.

e or show security notifications.

elect whether you want to sends touch tones during a ns during a voice call", on


Copyright © 20

Load imgs. & sounds — Select whether you want to load images while browsing. If you select No, to load images later during browsing, select Options > Show images.

Font size — Select the text size.

Default encoding — If text characters are not shown correctly, you can select another encoding according to language.

Auto. bookmarks — Enable or disable automatic bookmark collecting. If you want to continue collecting automatic bookmarks but hide the folder from the bookmarks view, select Hide folder.

Screen size — Select what is shown when you are browsing: Select. keys only or Full screen.

Homepage — Define the home page.

Search page — Define a Web page that is downloaded when you select Navigation options > Open search page in the bookmarks view, or when browsing.

Volume — If you want thembedded on Web pages

Rendering — If you wantaccurately as possible whBy quality. If you do not sheets to be downloaded

Cookies — Enable or disacookies.

Java/ECMA script — Ena

Security warnings — Hid

Conf. DTMF sending — Sconfirm before the devicevoice call. See also "Optiopage 48.

58

sic player, the previously played ayed. To view the music library, library and the desired song list. gs in the view, select Options >

to change between play and pause,

. To fast forward or rewind, press start playing the next or previous

a playlist, select Options > Add to new playlist, or select a saved

ress or .

m play and normal play mode, m play. To select whether playing playlist or restarts from its ns > Loop.

— Repeat; — Random; om; and — Loudspeaker muted.



My

own My own

Music player

Press , and select My own > Music player. With the music player, you can play music files and create and listen to playlists.

Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

Add musicWhen you open the music player for the first time, the player searches the device memory for music files to create a music library.

After you add or remove music files in the device, update your music library. Select Options > Music library > Options > Update Music library.

Tip! You can transfer music files from your device to your compatible memory card (if inserted) with Nokia PC Suite.

Play musicWhen you open the mutrack or playlist is displselect Options > MusicTo start playing the sonPlay.

When a song is playing, press and .

To stop a song, press and hold or . Tosong, press or .

To save the song list as track list, and create a playlist.

To adjust the volume, p

To select between randoselect Options > Randostops at the end of the beginning, select Optio

Icons in Music player: — Repeat and rand


My

own

59

adio service)

dio application as a traditional tuning and saved stations. If you r Visual Radio service, you can n the display related to the radio service uses packet data

n listen to the FM radio while

ervice, the following conditions

itched on. a valid SIM card inserted.to and the network operator you service.nt must be defined to access the server. See "Access points", on

the correct Visual Radio service Radio service enabled. See age 61.

to the Visual Radio service, the ns in your area may not support

adio service may not be available .


Copyright © 20

Tip! To leave the application open and music playing in the background, press to return to the standby mode. To return to the application, press , and select Music player.

To open your Web bookmarks for downloading music, select Options > Track downloads.

To return to the standby mode and leave the music playing in the background, select Options > Play in background.

Music libraryTo view the music library, select Options > Music library. All tracks lists all music. To view sorted songs, select Artists, Albums, Genres, or Composers. The album, artist, genre, and composer information is collected from the ID3 or M4A tags of the song files, if available.

To add songs, albums, artists, genres, or composers to a playlist, select the items and Options > Add to track list. You can create a new playlist or add to an existing one.

To view playlists, select Track lists. To create a new playlist, select Options > New track list. When viewing a playlist you have created yourself, to add more songs, select Options > Add tracks.

To delete a playlist, press . This only deletes the playlist, not the music files.

Visual R(network

You can use the Visual RaFM radio with automatic tune to stations that offeview visual information oprogram. The Visual Radio(network service). You causing other applications.

To use the Visual Radio sare required:• The device must be sw• The device must have• The station you listen

use must support this• An Internet access poi

operator’s visual radiopage 83.

• The station must haveID defined and Visual "Saved stations", on p

If you do not have accessoperators and radio statioVisual Radio. The Visual Rin all areas and countries

60

dio the radio broadcast depends on io station in that particular area.

eadset to the device. The lead of s the radio antenna, so let it hang lect My own > Radio.

, select or . Searching found. To change the frequency s > Manual tuning.

aved or

r To ion of

key.

ress the aker, te

ns based on location, select ctory (network service).



My

own The FM radio depends on an antenna other than the

wireless device antenna. A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly.

You can listen to the radio with the built-in loudspeaker or a compatible headset. When using the loudspeaker, keep the headset plugged in the device. The lead of the headset functions as the antenna of the radio, so let it hang freely.

Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

You can make a call or answer an incoming call while listening to the radio. The radio is turned off when there is an active call, and will restart automatically when the call is ended.

The radio selects the used frequency band based on the country information received from the network.

Visual Radio can be used for listening when the device cover is closed. Channel information may be displayed on the cover display. To mute or unmute the radio, press the cover key.

Listen to the raNote that the quality ofthe coverage of the rad

Connect a compatible hthe headset functions afreely. Press , and se

To start a station searchstops when a station is manually, select Option

If you have previously sradio stations, select

to go to the next oprevious saved station. select the memory locata station press the corresponding number

To adjust the volume, p or . To listen to

radio using the loudspeselect Options > Activaloudspeaker.

To view available statioOptions > Station dire


My

own

61

dio stations in Visual Radio. To ect Options > Stations.

n, select Options > Station >

, select Options > Station >

s and from the following:

t a tone to play when the

have the Visual Radio service you select a saved station that t Yes.

the access point used for the not need an access point to use inary FM radio.


Copyright © 20

To save the current tuned station to your station list, select Options > Save station. To open the list of your saved stations, select Options > Stations. See "Saved stations", on page 61.

To return to the standby mode and leave the FM radio playing in the background, select Options > Play in background.

View visual contentTo check availability and costs, and to subscribe to the service, contact your network operator or service provider.

To view available visual content for a tuned station, select or Options > Start visual service. If the visual service

ID has not been saved for the station, enter it, or select Retrieve to search for it in the station directory (network service).

When the connection to the visual service is established, the display shows the current visual content designed by the content provider.

To adjust display settings for the visual content view, select Options > Display settings > Lighting or Power saver time-out.

Saved stationsYou can save up to 20 raopen your station list, sel

To listen to a saved statioListen.

To change station detailsEdit.

SettingsSelect Options > Setting

Start-up tone — To selecapplication is started.

Auto-start service — To start automatically whenoffers visual service, selec

Access point — To selectdata connection. You do the application as an ord

62

M server server in use, open IM, and select change the IM server in use and , see "Chat server settings", on

nd password, and press to log ser ID and password for the IM vice provider.tions > Logout.

settingsgs > IM settings and from the

n only if IM groups are supported r a nickname, select Yes.

others to see if you are online,

To allow messages from all, select

— To allow invitations only from IM contacts only. IM invitations

who want you to join their groups.

To select the speed at which new .



My

own Instant messaging

(network service)Press , and select My own > IM.

Instant messaging (IM) allows you to converse with other people using instant messages and join discussion forums (IM groups) with specific topics. Various service providers maintain IM servers that you can log in to after you register to an IM service. Service providers may differ in their support of features.

Select Conversations to start or continue a conversation with an IM user; IM contacts to create, edit, or view the online status of your IM contacts; IM groups to start or continue a group conversation with multiple IM users; or Record. chats to view a previous IM session that you saved.

Check the availability of services, pricing, instructions, and fees with your network operator or service provider.

Receive IM settingsYou must save the settings to access the service that you want to use. You may receive the settings in a special text message from the network operator or service provider that offers the IM service. See "Data and settings", on page 33. You can also enter the settings manually. See "Chat server settings", on page 64.

Connect to an I1 To connect to the IM

Options > Login. Tosave new IM serverspage 64.

2 Enter your user ID ain. You obtain the userver from your ser

3 To log out, select Op

Modify your IMSelect Options > Settinfollowing:

Use screen name (showby the server) — To ente

IM presence — To allowselect Active for all.

Allow messages from —All.

Allow invitations fromyour IM contacts, selectare sent by IM contacts

Msg. scrolling speed —messages are displayed


My

own

63

p, you can view the messages , and send your own messages.

the message in the message .

e to a participant, select msg..

age sent to you, select the eply.

are online to join the IM group, vitation.

sages from certain participants, g options and the desired option.

hat are exchanged during a are joined in a IM group, select o stop recording, select g. To view the recorded chats, in ord. chats.

nversationshows a list of the individual that you have an ongoing


Copyright © 20

Sort IM contacts — To select how your IM contacts are sorted: Alphabetically or By online status.

Availabil. reloading — To select how to update information about whether your IM contacts are online or offline, select Automatic or Manual.

Offline contacts — To select whether IM contacts with an offline status are shown in the IM contacts list.

Search for IM groups and usersTo search for groups, in the IM groups view, select Options > Search. You can search by Group name, Topic, and Members (user ID).

To search for users, in the IM contacts view, select Options > New IM contact > Search from server. You can search by User's name, User ID, Phone number, and E-mail address.

Join IM groupsThe IM groups view shows a list of the IM groups that you have saved or are currently joined to.

To join a saved IM group, press .

To join an IM group that is not on the list, but for which you know the group ID, select Options > Join new group.

To leave the IM group, select Options > Leave IM group.

ChatAfter you join an IM grouthat are exchanged there

To send a message, writeeditor field, and press

To send a private messagOptions > Send private

To reply to a private messmessage and Options > R

To invite IM contacts whoselect Options > Send in

To prevent receiving messelect Options > Blockin

Record chatsTo record the messages tconversation or while youOptions > Record chat. TOptions > Stop recordinthe main view, select Rec

View and start coThe Conversations view sconversation participants

64

ingsgs > Server settings. You may special text message from the vice provider that offers the chat user ID and password from your ou register to the service. If you do r password, contact your service

all defined IM servers.

e the IM server to which you want

n automatically when you start IM, .

your list of IM servers, select w server. Enter the following

e for the chat server

he access point you want to use for

L address of the IM server

password



My

own conversation with. Ongoing conversations are

automatically closed when you exit IM.

To view a conversation, scroll to a participant, and press .

To continue the conversation, write your message, and press .

To return to the conversations list without closing the conversation, select Back. To close the conversation, select Options > End conversation.

To start a new conversation, select Options > New conversation.

To save a conversation participant to your IM contacts, select Options > Add to IM contacts.

To send automatic replies to incoming messages, select Options > Set auto reply on. You can still receive messages.

IM contactsIn the IM contacts view, you can retrieve chat contact lists from the server, or add a new chat contact to a contact list. When you log in to the server, the previously used chat contact list is retrieved from the server automatically.

Chat server settSelect Options > Settinreceive the settings in anetwork operator or serservice. You obtain the service provider when ynot know your user ID oprovider.

Servers — View a list of

Default server — Changto connect.

IM login type — To log iselect On app. start-up

To add a new server to Servers > Options > Nesettings:

Server name — the nam

Access point in use — tthe server

Web address — the UR

User ID — your user ID

Password — your login


My

own

65


Copyright © 20

Go to — add shortcuts

Press , and select My own > Go to.

Default shortcuts are the following: opens Calendar, opens Inbox, and opens Notes.

GamesPress , and select My own and a game. For instructions on how to play the game, select Options > Help.

66

ou of a task that needs doing by a

et an alarm, select Alarm > On, time and Alarm date. for a meeting, select Options >

lect Done.

occurs, select Silence to turn off . The reminder text stays on the dar alarm, select Stop. To set the Snooze.

hronize your calendar with a ng Nokia PC Suite. When creating et the desired Synchronisation

ss > Settings to change the

e week or the view that is shown e calendar.



Cale

ndar Calendar

Use Calendar to remind you of meetings, anniversaries, and to keep track of your tasks and other notes.

Create calendar entriesShortcut: In the day, week, or month calendar view, press any key ( — ). An appointment entry opens, and the characters you enter are added to the Subject field.

1 Press , and select Calendar > Options > New entry and one of the following:Meeting — to remind you of an appointment that has a specific date and timeMemo — to write a general entry for a dayAnniversary — to remind you of birthdays or special dates (entries are repeated every year)

To-do — to remind yspecific date

2 Fill in the fields. To sand enter the AlarmTo add a descriptionAdd description.

3 To save the entry, se

When the calendar alarmthe calendar alarm tonescreen. To end the calenalarm to snooze, select

Tip! You can synccompatible PC usia calendar entry, soption.

Calendar viewTip! Select Optionstarting day of thwhen you open th


Cale

ndar

67

alendar entriesalendar saves space in your

vent at a time, go to the month > Delete entry > Before date or

ed, scroll to it in the to-do view, rk as done.

gslarm tone, Default view, Week title, select Options >


Copyright © 20

In the month view, dates that have calendar entries are marked with a small triangle in the right bottom corner. In the week view, memos and anniversaries are placed before 8 a.m. To switch between the month view, week view, day view, and to-do view, press .

To go to a certain date, select Options > Go to date. To jump to today, press .

To send a calendar note to a compatible device, select Options > Send.

To print calendar entries on a compatible basic print profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print.

Manage your cDeleting past entries in Cdevice memory.

To delete more than one eview, and select OptionsAll entries.

To mark a task as completand select Options > Ma

Calendar settinTo modify the Calendar astarts on, and Week viewSettings.

68

cy and exchange rates> Options > Currency rates.

rrency conversions, you must select exchange rates. The rate of the

1.

change base currency, you must ecause all previously set exchange .

, and select Office > Notes. You atible devices, and save plain text ou receive to Notes.

patible basic print profile (BPP) luetooth connectivity (such as HP ter or HP Photosmart 8150), select



Off

ice Office

Calculator

To add, substract, multiply, divide, and calculate square roots and percentages, press , and select Office > Calculator.

Note: This calculator has limited accuracy and is designed for simple calculations.

Converter

To convert measures from one unit to another, press , and select Office > Converter.

Converter has limited accuracy, and rounding errors may occur.1 In the Type field, select the measure you want to use.2 In first Unit field, select the unit from which you want

to convert. In the next Unit field, select the unit to which you want to convert.

3 In the first Amount field, enter the value you want to convert. The other Amount field changes automatically to show the converted value.

Set base currenSelect Type > CurrencyBefore you can make cua base currency and addbase currency is always

Note: When youenter new rates brates are cleared

Notes

To write notes, press can send notes to compfiles (.txt format) that y

To print a note on a comequipped printer with BDeskjet 450 Mobile PrinOptions > Print.


Off

ice

69


Copyright © 20

Recorder

To record voice memos, press , and select Office > Recorder. To record a telephone conversation, open Recorder during a voice call. Both parties hear a tone every 5 seconds during recording.

The recorder cannot be used when a data call or GPRS connection is active.

70

me note to an image, press , and ngs > Phone > General > o.

menu view, in the main menu, ange view > Grid or List.in menu, in the main menu, select ove to folder, or New folder. You pplications into folders, and place

u use more often into the main

s — set tones

e ringing tones, message alert or different events, environments,

, and select Tools > Profiles.

ress in the standby mode. want to activate, and select OK.

mode, press repeatedly until is selected in the cover display, r key.



Pers

onal

ize

your

dev

ice Personalize your device

The open applications and folders that have applications open are indicated by a small icon in the main menu.• To use the standby display for fast access to your most

frequently used applications, see "Active standby mode", on page 72.

• To change the standby mode background image or what is shown in the screen saver, see "Change the look of your device", on page 71.

• To customize the ringing tones, see "Profiles — set tones", on page 70 and "Add ringing tones for contacts", on page 53.

• To change the shortcuts assigned for the different presses of the scroll key and selection keys in the standby mode, see "Standby mode", on page 80.

• To configure the cover display, see "Cover display settings", on page 81.

• To change the clock shown in the standby mode, press , and select Clock > Options > Settings > Clock

type > Analogue or Digital.

• To change the welcoselect Tools > SettiWelcome note / log

• To change the mainselect Options > Ch

• To rearrange the maOptions > Move, Mcan move less used aapplications that yomenu.

Profile

To set and customize thtones, and other tones for caller groups, press

To change the profile, pScroll to the profile you

Tip! In fold closedthe desired profileand press the cove


Pers

onal

ize

your

dev

ice

71

fline profile you cannot make or xcept make calls to certain rs, or use other features that verage. To make calls, you must hone function by changing ice has been locked, enter the

le, press , and select another bles wireless transmissions ent signal strength). If a ctivated before entering the deactivated. A Bluetooth lly reactivated after leaving the ings", on page 73.

the look of your

display, such as the wallpaper elect Tools > Themes. The active . In Themes you can group ther themes or select images nalize themes further. The

ard (if inserted) are indicated by emory card are not available if

serted in the device. If you want


Copyright © 20

To modify a profile, press , and select Tools > Profiles. Scroll to the profile, and select Options > Personalise. Scroll to the setting you want to change, and press to open the choices. Tones stored on the memory card are indicated with . You can scroll through the tone list and listen to each one before you make your selection. To stop the sound, press any key.

When you choose a tone, Tone downloads opens a list of bookmarks. You can select a bookmark and start connection to a Web page to download tones.

If you want the caller’s name to be said when your device rings, select Options > Personalise > Say caller's name > On. The caller’s name must be saved in Contacts.

To create a new profile, select Options > Create new.

Offline profileThe Offline profile lets you use the device without connecting to the wireless network. When you activate the Offline profile, the connection to the wireless network is turned off, as indicated by in the signal strength indicator area. All wireless phone signals to and from the device are prevented. If you try to send messages, they are placed in the outbox to be sent later.

Warning: In the ofreceive any calls, eemergency numberequire network cofirst activate the pprofiles. If the devlock code.

To leave the Offline profiprofile. The device re-ena(providing there is sufficiBluetooth connection is aOffline profile, it will be connection is automaticaOffline profile. See "Sett

Changedevice

To change the look of theand icons, press , and stheme is indicated by together elements from ofrom the Gallery to persothemes on the memory c

. The themes on the mthe memory card is not in

72

lay is

top of r, s

or

e used y

pplications shortcuts, press , > Phone > Standby mode > nd press .

fixed, and you are not able to



Pers

onal

ize

your

dev

ice to use the themes saved in the memory card without the

memory card, save the themes in the device memory first.

To open a browser connection and download more themes, select Theme downloads.

To activate a theme, scroll to it, and select Options > Apply. To preview a theme before activating it, select Options > Preview.

To edit themes, scroll to a theme, and select Options > Edit to change the Wallpaper and Power saver settings.

To restore the selected theme to its original settings, select Options > Restore orig. theme when you edit a theme.

Active standby modeUse your standby display for fast access to your most frequently used applications. By default, the active standby mode is on.

Press , select Tools > Settings > Phone > Standby mode > Active standby, and press to switch the active standby on or off.

The active standby dispshown with default applications across the the screen, and calendato-do, and player eventlisted below.

Scroll to an applicationevent, and press .

The standard scroll key shortcuts available in thstandby mode cannot bewhen the active standbmode is on.

To change the default aselect Tools > SettingsActive standby apps., a

Some shortcuts may bechange them.


Conn

ectiv

ity

73

e Nokia approved enhancements h the manufacturers of other r compatibility with this device.

corresponds to a service or a s how different devices connect. ndsfree profile is used between a d your device. For devices to be st support the same profiles.

on using Bluetooth technology with your local authorities or

technology, or allowing such kground while using other and on battery power and

d, you cannot use Bluetooth y", on page 85 for more e device.

nect. > Bluetooth. When you the first time, you are asked to vice. After you set Bluetooth


Copyright © 20

ConnectivityBluetooth connectivity

You can connect wirelessly to other compatible devices with wireless Bluetooth technology. Compatible devices may include mobile phones, computers, and enhancements such as headsets and car kits. You can use Bluetooth connectivity to send images, video clips, music and sound clips, and notes; connect wirelessly to your compatible PC (for example, to transfer files); and connect to a compatible printer to print images with Image print. See "Image print", on page 22.

Since devices with Bluetooth technology communicate using radio waves, your device and the other device do not need to be in direct line-of-sight. The two devices only need to be within 10 meters (33 feet) of each other, but the connection may be subject to interference from obstructions such as walls or from other electronic devices.

This device is compliant with Bluetooth Specification 1.2 that supports the following profiles: basic printing, generic access, serial port, dial-up networking, headset, handsfree, generic object exchange, object push, file transfer, basic imaging, SIM access, and human interface device. To ensure interoperability between other devices supporting

Bluetooth technology, usfor this model. Check witdevices to determine thei

Glossary: A profile function, and defineFor example, the hahandsfree device ancompatible, they mu

There may be restrictionsin some locations. Check service provider.

Features using Bluetoothfeatures to run in the bacfeatures, increase the demreduce the battery life.

When the device is lockeconnectivity. See "Securitinformation on locking th

SettingsPress , and select Conopen the application for define a name for your de

74

turned off, as indicated by in ator area, and you cannot use SIM

s requiring cellular network

ce is in the remote SIM mode, you ble connected enhancement, such receive calls. Your wireless device except to the emergency numbers evice, while in this mode. To make ou must first leave the remote SIM been locked, enter the code to

mode, press , and select Exit

Bluetooth connectivity, select phone's visibility > Hidden.

nown device.

ections can be active at a time. For nected to a compatible headset, es to another compatible device at



Conn

ectiv

ity connectivity on and change My phone's visibility to Shown to all, your device and this name can be seen by other users with devices using Bluetooth technology.

Select from the following:

Bluetooth — To connect wirelessly to another compatible device, set Bluetooth connectivity On, and establish a connection.

My phone's visibility — To allow your device to be found by other devices with Bluetooth technology, select Shown to all. To hide it from other devices, select Hidden.

My phone's name — Edit the name of your device.

Remote SIM mode — To enable another device, such as a compatible car kit enhancement, to use the SIM card in your device to connect to the network, select On.

Remote SIM modeTo use the remote SIM mode with a compatible car kit enhancement, set Bluetooth connectivity on, and enable the use of the remote SIM mode with your device. Before the mode can be activated, the two devices must be paired and the pairing initiated from the other device. When pairing, use a 16-digit passcode, and set the other device as authorized. See "Pair devices", on page 75. Activate the remote SIM mode from the other device.

When remote SIM mode is on in your Nokia N71, Remote SIM is displayed in the standby mode. The connection to

the wireless network is the signal strength indiccard services or featurecoverage.

When the wireless devican only use a compatias a car kit, to make or will not make any calls,programmed into your dcalls from your device, ymode. If the device hasunlock it first.

To leave the remote SIMrem. SIM mode.

Security tipsWhen you are not usingBluetooth > Off or My

Do not pair with an unk

Send dataSeveral Bluetooth connexample, if you are conyou can also transfer filthe same time.


Conn

ectiv

ity

75

g for devices, some devices may e address (device address). To

ress of your device, enter the e standby mode.

s view ( ), in the Bluetooth ess .

r own passcode (1—16 digits), r of the other device to use the o not have a user interface have he passcode is used only once.

ct Options > New paired less Bluetooth technology within he display. Select the device, and ame passcode must be entered ll. After pairing, the device is

es view.

ed by in the device search.

ized or unauthorized, scroll to a

nections between your device de without your knowledge. No

uthorization is needed. Use this es, such as your compatible


Copyright © 20

Bluetooth connectivity indicators• When is shown in the standby mode, Bluetooth

connectivity is on.• When is blinking, your device is trying to connect

with another device.• When is shown continuously, data is being

transmitted.Tip! To send text, open Notes, write the text, and select Options > Send > Via Bluetooth.

1 Open the application where the item you want to send is stored. For example, to send an image to another compatible device, open Gallery.

2 Select the item and Options > Send > Via Bluetooth. Devices with Bluetooth technology within range start to appear on the display.Device icons: — computer, — phone, — audio or video device, and — other device.To interrupt the search, select Stop.

3 Select the device with which you want to connect.4 If the other device requires pairing before data can be

transmitted, a tone sounds, and you are asked to enter a passcode. See "Pair devices", on page 75.

5 When the connection has been established, Sending data is shown.

The Sent folder in Messag. does not store messages sent using Bluetooth connectivity.

Tip! When searchinshow only the uniqufind the unique addcode *#2820# in th

Pair devicesTo open the paired deviceapplication main view, pr

Before pairing, create youand agree with the ownesame code. Devices that da factory-set passcode. T

To pair with a device, seledevice. Devices with wirerange start to appear on tenter the passcode. The son the other device as wesaved to the paired devic

Paired devices are indicat

To set a device as authordevice, and Options >

Set as authorised — Conand this device can be maseparate acceptance or astatus for your own devic

76

d connection

an transfer data such as business nd media files with a compatible

m at anyone's eye or allow it to evices. This device is a Class 1 laser

IR ports of the sending and pointing at each other, and that tions between the devices. The between the two devices is up to

iving device activates the IR port.rt of your device to receive data, Connect. > Infrared.ing device selects the desired IR data transfer.the desired file in an application or d select Options > Send > Via

arted within 1 minute after the t, the connection is cancelled and



Conn

ectiv

ity headset or PC or devices that belong to someone you trust. indicates authorized devices in the paired devices view.

Set as unauthorised — Connection requests from this device must be accepted separately every time.

To cancel a pairing, scroll to the device, and select Options > Delete. If you want to cancel all pairings, select Options > Delete all.

Tip! If you are currently connected to a device and delete the pairing with that device, pairing is removed immediately, and the connection is switched off.

Receive dataWhen you receive data through Bluetooth connectivity, a tone sounds, and you are asked if you want to accept the message. If you accept, is shown, and the item is placed in the Inbox folder in Messag.. Messages received through Bluetooth connectivity are indicated by . See "Inbox — receive messages", on page 32.

Switch off Bluetooth connectivityTo switch off Bluetooth connectivity, select Bluetooth > Off.

Infrare

With infrared (IR), you ccards, calendar notes, adevice.

Do not point the IR beainterfere with other IR dproduct.

Send and receive data:1 Make sure that the

receiving devices arethere are no obstrucpreferable distance 1 meter (3 feet).

2 The user of the receTo activate the IR popress , and select

3 The user of the sendfunction to start theTo send data, locate the file manager, aninfrared.

If data transfer is not stactivation of the IR pormust be started again.


Conn

ectiv

ity

77

modems a modem to send and receive e Internet with a compatible PC ctivity, infrared, or a USB data n instructions can be found in PC Suite.

kia PC Suite for the first time, to to a compatible PC and to use the Get Connected wizard C Suite.

on manager

ect. > Conn. mgr.. To view the s or end connections in GSM and t. data conn..

view, you can see the open data ) and packet data connections

ime invoiced for calls by your y vary, depending on network off for billing, and so forth.


Copyright © 20

All items received through IR are placed in the Inbox folder in Messaging. New IR messages are indicated by .

When blinks, your device is trying to connect to the other device or a connection has been lost.

When is shown continuously, the IR connection is active, and your device is ready to send and receive data using its IR port.

Data cbl.

To select the function for which the USB data cable connection is used, press , and select Connect. > Data cbl. > Ask on connection, PC Suite, Data transfer.

PC connectionsYou can use your device with a variety of PC connectivity and data communications applications. For example, with Nokia PC Suite you can transfer images between your device and a compatible PC.

Always create the connection from the PC to synchronize with your device.

Your device as a You can use your device ae-mail, or to connect to thby using Bluetooth connecable. Detailed installatiothe user guide for Nokia

Tip! When using Noconnect your deviceNokia PC Suite, useavailable in Nokia P

Connecti

Press , and select Connstatus of data connectionUMTS network, select Ac

Data connectionsIn the active connectionsconnections: data calls (( and ).

Note: The actual tservice provider mafeatures, rounding

78

tion profile and Options > atus of the synchronization is y.ation before it finishes, select

n the synchronization is complete.howing the synchronization status es have been added, updated, (not synchronized) in your device ct Yes.

manager

nnect. > Dev. mgr.. You may nd different configuration settings ator, service provider, or company nt department. These configuration cess point settings for data ettings used by different ice.

nd receive configuration settings a profile, and select Options >

ng of configuration settings from Options > Enable config. or



Conn

ectiv

ity To end a connection, select Options > Disconnect. To close all open connections, select Options > Disconnect all.

To view the details of a connection, select Options > Details. The details shown depend on the connection type.

Synchronization

Press , and select Connect. > Sync. Sync enables you to synchronize your notes, calendar, contacts, or e-mail with various compatible calendar and address book applications on a compatible computer or on the Internet. You can also create or edit synchronization settings.

The synchronization application uses SyncML technology for synchronization. For information on SyncML compatibility, contact the supplier of the application with which you want to synchronize your device data.

You may receive synchronization settings in a special text message. See "Data and settings", on page 33.

Synchronize dataIn the Sync main view, you can see the different synchronization profiles.

1 Select a synchronizaSynchronise. The stshown on the displaTo cancel synchronizCancel.You are notified whe

2 To view the log file sand how many entrideleted, or discardedor on the server, sele

Device

Press , and select Coreceive server profiles afrom your network operinformation managemesettings may include acconnections and other sapplications in your dev

To connect to a server afor your device, scroll toStart configuration.

To allow or deny receiviservice providers, selectDisable config..


Conn

ectiv

ity

79


Copyright © 20

Server profile settingsContact your service provider for the correct settings.

Server name — Enter a name for the configuration server.

Server ID — Enter the unique ID to identify the configuration server.

Server password — Enter a password to identify your device to the server.

Access point — Select an access point to be used when connecting to the server.

Host address — Enter the URL address of the server.

Port — Enter the port number of the server.

User name and Password — Enter your user name and password.

Allow configuration — To receive configuration settings from the server, select Yes.

Auto-accept all reqs. — If you want your device to ask for confirmation before accepting a configuration from the server, select No.

Network authentic. — If you want your device to use network authentication, select Yes.

80

e until you change these settings

anging the language affects the haracters available when writing text dictionary used.

he predictive text input On or Off vice. The predictive text dictionary nguages.

The welcome note or logo is ime you switch on the device. e default image, Text to write a to select an image from Gallery.

You can reset some of the settings To do this, you need the lock code. 85, "Phone and SIM", on page 86. ce may take a longer time to power s are unaffected.

use of the side key for voice

hortcuts to applications in the ive standby mode", on page 72.



Tool

s ToolsSettings

To change settings, press , and select Tools > Settings. To open a settings group, press . Scroll to a setting you want to change, and press .

Some settings may be preset for the device by your network operator or service provider, and you may not be able to change them.

Phone sett.

GeneralPhone language — Changing the language of the display texts in your device also affects the format used for date and time and the separators used, for example, in calculations. Automatic selects the language according to the information on your SIM card. After you change the display text language, the device restarts.

Changing the settings for Phone language or Writing language affects every application in your device, and the

change remains effectivagain.

Writing language — Chcharacters and special ctext and the predictive

Predictive text — Set tfor the editors in the deis not available for all la

Welcome note / logo —displayed briefly each tSelect Default to use thwelcome note, or Image

Orig. phone settings —to their original values. See "Security", on pageAfter resetting, the devion. Documents and file

Voice key — Define thecommands or PTT.

Standby modeActive standby — Use sstandby mode. See "Act


Tool

s

81

sange the brightness of the cover r. Changing the brightness of the fect the brightness of the main

crop a background image.

cover display power saver type, f an image or an animation r the time-out period before the

ngs

can set your phone number to idden from (No) the person to the value may be set by your ce provider when you make a ork) (network service).

e activated call waiting (network ifies you of a new incoming call rogress. Set the function on , or check whether the function s).


Copyright © 20

Left selection key — Assign a shortcut to ( ) in the standby mode.

Right selection key — Assign a shortcut to ( ) in the standby mode.

Active standby apps. — Select the application shortcuts you want to appear in the active standby. This setting is only available if Active standby is on.

You can also assign keypad shortcuts for the different presses of the scroll key. The scroll key shortcuts are not available if the Active standby is on.

Operator logo — This setting is only available if you have received and saved an operator logo. Select Off if you do not want the logo to be shown.

DisplayBrightness — Adjust the basic brightness level of the display to lighter or darker. However, in extreme light conditions, the brightness of the display is automatically adjusted.

Power saver time-out — Select the time-out period after which the power saver is activated.

Light time-out — Select a time-out after which the backlight of the display is switched off.

Cover display settingBrightness — You can chdisplay to lighter or darkecover display does not afdisplay.

Wallpaper — Select and

Power saver — Select theits time-out period, and iscreen saver is shown aftepower saver is activated.

Call setti

Send my caller ID — Yoube displayed to (Yes) or hwhom you are calling, ornetwork operator or servisubscription (Set by netw

Call waiting — If you havservice), the network notwhile you have a call in p(Activate) or off (Cancel)is activated (Check statu

82

ave not subscribed to this network able to make calls. When line 2 is the standby mode.

ween the phone lines, press and ndby mode.

nt line selection (network service), ted by your SIM card. To change e PIN2 code.

— Select On to answer calls by

ion

nd access pointscket data connections, such as rk. When you use your device in

ks, multiple data connections can me, and access points can share a

ection, an access point is required. t kinds of access points:o send and receive multimedia

Services application to view WML



Tool

s Reject call with SMS — To send a text message to a caller informing why you could not answer the call, select Yes. See "Answer or reject a call", on page 47.

Message text — Write a text to be sent in a text message when you reject a call.

Image in video call — You can deny video sending when you receive a video call. Select a still image to be displayed instead of video.

Automatic redial — To set your device to make a maximum of 10 attempts to connect the call after an unsuccessful call attempt. To stop automatic redialing, press .

Summary after call — Activate this setting if you want the device to briefly display the approximate duration of the last call.

Speed dialling — To dial numbers assigned to the speed dialing keys ( — ) press and hold the key. See also "Speed dial a phone number", on page 42.

Anykey answer — To answer an incoming call, by pressing any key except , , , and , select On.

Line in use — This setting (network service) is shown only if the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line you want to use for making calls and sending text messages. Calls on both lines can be answered irrespective of the selected line. If

you select Line 2 and hservice, you will not be selected, is shown in

Tip! To switch bethold in the sta

Line change — To preveselect Disable if supporthis setting, you need th

Answer if fold openedopening the cover.

Connect

Data connections aYour device supports paGPRS in the GSM netwoGSM and UMTS networbe active at the same tidata connection.

To establish a data connYou can define differen• MMS access point t

messages• Access point for the

or XHTML pages


Tool

s

83

ve been instructed otherwise by

onnection, the network service is feature, and if necessary, ard.

om your service provider.

tain the access point name from service provider.

me may be needed to make a sually provided by the service

u must enter the password every r, or if you do not want to save ice, select Yes.

may be needed to make a data y provided by the service

the level of authentication:

on the access point you are address or the address of the nter.


Copyright © 20

• Internet access point (IAP) to send and receive e-mail and connect to the Internet

Check the type of access point you need with your service provider for the service you want to access. For availability and subscription to packet data connection services, contact your network operator or service provider.

Access pointsYou may receive access point settings in a message from a service provider. See "Data and settings", on page 33. Some or all access points may be preset for your device by your service provider or network operator, and you may not be able to change, create, edit, or remove them. indicates a protected access point.

indicates a packet data access point.

To create a new access point, select Options > New access point. To edit the settings of an access point, select Options > Edit. Follow the instructions from your service provider.

Connection name — Enter a descriptive name for the connection.

Data bearer — Select the data connection type.

Depending on the data connection you select, only certain setting fields are available. Fill in all fields marked with Must be defined or with a red asterisk. Other fields can be

left empty, unless you hayour service provider.

To be able to use a data cprovider must support thactivate it for your SIM c

Packet data

Follow the instructions fr

Access point name — Obyour network operator or

User name — The user nadata connection, and is uprovider.

Prompt password — If yotime you log in to a serveyour password in the dev

Password — A password connection, and is usuallprovider.

Authentication — DefineNormal or Secure.

Homepage — Depending setting up, enter the Webmultimedia messaging ce

84

dress — Select Automatic, Well-.

or Ad-hoc) — To enter a channel y, select User defined.

nter the address for the proxy

nter the proxy port number.

s affect all access points using a .

you select When available and you pports packet data, the device

data network. Starting an active (for example, to send and receive re is no packet data coverage, the to establish a packet data t When needed, the device uses a only if you start an application or

ess point name is needed to use data modem to your computer.



Tool

s Select Options > Advanced settings to change the following settings:

Network type — Select the Internet protocol type: IPv4 settings or IPv6 settings. The other settings depend on the selected network type.

Phone IP address (for IPv4 only) — Enter the IP address of your device.

DNS address — In Primary name serv.:, enter the IP address of the primary DNS server. In Second. name server:, enter the IP address of the secondary DNS server. Contact your Internet service provider to obtain these addresses.

Proxy serv. address — Define the address for the proxy server.

Proxy port number — Enter the proxy port number.

Homepage — Define a home page.

Select Options > Advanced settings and from the following:

IPv4 settings > Phone IP address (the IP address of your device), Subnet mask (the subnet IP address), Default gateway (the gateway), and DNS address — Enter the IP addresses of the primary and secondary DNS server. Contact your Internet service provider for these addresses.

IPv6 settings > DNS adknown, or User defined

Ad-hoc channel (only fnumber (1-11) manuall

Proxy serv. address — Eserver.

Proxy port number — E

Packet dataThe packet data settingpacket data connection

Packet data conn. — If are in a network that suregisters to the packet packet data connectione-mail) is quicker. If thedevice periodically triesconnection. If you selecpacket data connectionaction that needs it.

Access point — The accyour device as a packet


Tool

s

85

service provider. See "Glossary n page 86.

similar to the emergency ental dialing of the emergency

an set an autolock period, a device automatically locks. To od, select None.

er the lock code.

, calls still may be possible to the er programmed into your device.

ice manually, press . A list of elect Lock phone.

ou can set the device to ask for known SIM card is inserted into aintains a list of SIM cards that ner’s cards.

can specify a group of people to ho can call you (network service).

closed user groups, calls still may emergency number programmed


Copyright © 20

Configs.You may receive trusted server settings from your network operator or service provider in a configuration message, or the settings may be stored on your (U)SIM card. You can save these settings to your device, view, or delete them in Configs..

Date and time

See "Clock settings", on page 4, and language settings in "General", on page 80.

Security

Phone and SIMPIN code request — When active, the code is requested each time the device is switched on. Deactivating the personal identification number (PIN) code request may not be allowed by some SIM cards. See "Glossary of PIN and lock codes", on page 86.

PIN code, PIN2 code, and Lock code — You can change the lock code, PIN code, and PIN2 code. These codes can only include the numbers from 0 to 9. If you forget any of

these codes, contact yourof PIN and lock codes", o

Avoid using access codesnumbers to prevent accidnumber.

Autolock period — You ctime-out after which theturn off the autolock peri

To unlock the device, ent

When the device is lockedofficial emergency numb

Tip! To lock the devcommands opens. S

Lock if SIM changed — Ythe lock code when an unyour device. The device mare recognized as the ow

Closed user group — Youwhom you can call and w

When calls are limited to be possible to the official into your device.

86

(PUK) code and PUK2 code — e required to change a blocked PIN ectively. If the codes are not ard, contact the operator whose ce.

(8 digits) is required to change a e code is not supplied with the

operator whose USIM card is in

tot guarantee safety; they are used ftware.

ement main view, you can see a ates that are stored in your device. f personal certificates, if available.

ld be used if you want to connect other site or remote server for nsferring confidential information. d if you want to reduce the risk of us software and be sure of the when downloading and installing



Tool

s Confirm SIM services — You can set the device to display confirmation messages when you are using a SIM card service (network service).

Glossary of PIN and lock codes

If you forget any of these codes, contact your service provider.

Personal identification number (PIN) code — This code protects your SIM card against unauthorized use. The PIN code (4 to 8 digits) is usually supplied with the SIM card. After three consecutive incorrect PIN code entries, the code is blocked, and you need the PUK code to unblock it.

UPIN code — This code may be supplied with the USIM card. The USIM card is an enhanced version of the SIM card and is supported by UMTS mobile devices.

PIN2 code — This code (4 to 8 digits) is supplied with some SIM cards, and is required to access some functions in your device.

Lock code (also known as security code) — This code (5 digits) can be used to lock the device to avoid unauthorized use. The factory setting for the lock code is 12345. To avoid unauthorized use of your device, change the lock code. Keep the new code secret and in a safe place separate from your device. If you forget the code, contact your service provider.

Personal unblocking keyThese codes (8 digits) arcode or PIN2 code, respsupplied with the SIM cSIM card is in your devi

UPUK code — This codeblocked UPIN code. If thUSIM card, contact theyour device.

Certif. managemenDigital certificates do nto verify the origin of so

In the certificate managlist of authority certificPress to see a list o

Digital certificates shouto an online bank or anactions that involve traThey should also be useviruses or other malicioauthenticity of softwaresoftware.


Tool

s

87

period of validity has ended for

— The period of validity has not d certificate.

The certificate cannot be used. suer.

s

ificate settings, you must make the owner of the certificate and belongs to the listed owner.

tificate, and select Options > g on the certificate, a list of the the selected certificate is shown.

s — The certificate is able to Symbian operating system

tificate is able to certify servers.

The certificate is able to certify M application.

st setting to change the value.


Copyright © 20

Important: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime. If Expired certificate or Certificate not valid yet is shown even if the certificate should be valid, check that the current date and time in your device are correct.

View certificate details

You can only be sure of the correct identity of a server when the signature and the period of validity of a server certificate have been checked.

You are notified if the identity of the server is not authentic or if you do not have the correct security certificate in your device.

To check certificate details, scroll to a certificate, and select Options > Certificate details. When you open certificate details, the validity of the certificate is checked, and one of the following notes may be displayed:

Certificate not trusted — You have not set any application to use the certificate. See "Change the trust settings", on page 87.

Expired certificate — Thethe selected certificate.

Certificate not valid yetyet begun for the selecte

Certificate corrupted — Contact the certificate is

Change the trust setting

Before changing any certsure that you really trust that the certificate really

Scroll to an authority cerTrust settings. Dependinapplications that can use For example:

Symbian installation: Yecertify the origin of a newapplication.

Internet > Yes — The cer

App. installation > Yes —the origin of a new JavaT

Select Options > Edit tru

88

ring

ervice) allows you to restrict the eceive with the device. To change he barring password from your

ng option, and set it on (Activate) k whether the option is active rring affects all calls, including

erting cannot be active at the

alls still may be possible to the ber programmed into your device.

tically switch between the GSM GSM network is indicated with e UMTS network is indicated with



Tool

s Track protect. objectSome copyright-protected music files may include a transaction identifier. Select whether you allow the identifier to be sent with the music file if you send or forward the file. The provider of the music file can use the identifier to track the distribution of the files.

Call divert

Call divert allows you to divert your incoming calls to your voice mailbox or another phone number. For details, contact your service provider.

Select which calls you want to divert and the desired divert option. To divert voice calls when your number is busy or when you reject incoming calls, select Voice calls > If busy. Set the option on (Activate) or off (Cancel), or check whether the option is activated (Check status).

Several divert options can be active at the same time. When all calls are diverted, is shown in the standby mode.

Call barring and call diverting cannot be active at the same time.

Call bar

Call barring (network scalls that you make or rthe settings, you need tservice provider.

Select the desired barrior off (Cancel), or chec(Check status). Call badata calls.

Call barring and call divsame time.

When calls are barred, cofficial emergency num

Network

Your device can automaand UMTS networks. Thein the standby mode. Th

.


Tool

s

89

sett.

indicates a compatible headset t the headset is unavailable, or a a headset is lost. indicates a nected, that a Text phone hat a car kit is connected.

Text phone, Bluetooth from the following:

profile that you want activated certain enhancement to your t tones", on page 70.

if you want the device to answer tically after 5 seconds. If the p once or Silent, automatic atic answer is not available for

one, you must activate it on your ct Tools > Settings >

one > Use text phone > Yes.


Copyright © 20

Network mode (shown only if supported by the network operator) — Select which network to use. If you select Dual mode, the device uses the GSM or UMTS network automatically, according to the network parameters and the roaming agreements between the network operators. Contact your network operator for more details.

Operator selection — Select Automatic to set the device to search for and select one of the available networks, or Manual to manually select the network from a list of networks. If the connection to the manually selected network is lost, the device sounds an error tone and asks you to reselect a network. The selected network must have a roaming agreement with your home network, that is, the operator whose SIM card is in your device.

Glossary: A roaming agreement is an agreement between two or more network service providers to enable the users of one service provider to use the services of other service providers.

Cell info display — Select On to set the device to indicate when it is used in a cellular network based on microcellular network (MCN) technology and to activate cell info reception.

Enhanc.

In the standby mode, is connected, and thaBluetooth connection to compatible loopset is conis connected, and t

Select Headset, Loopset,handsfree, or Car kit and

Default profile — Set theeach time you connect a device. See "Profiles — se

Automatic answer — Setan incoming call automaRinging type is set to Beeanswer is disabled. AutomText phone.

If you are using a Text phdevice. Press , and seleEnhancement > Text ph

90

Synthesiser > Off. To reset voice r example, when the main user of ), select Reset voice adapts..

tion manager

ols > App. mgr.. You can install s and software to your device:

based on Java technology with the ( ). nd software suitable for the ystem ( ). The installation files on. Only install software for your Nokia N71. Software refer to the official model number .

transferred to your device from a ownloaded during browsing, or edia message, as an e-mail uetooth connectivity or infrared. ication Installer in Nokia PC Suite to your device. If you use lorer to transfer a file, save the file y card.



Tool

s Voice commands

You can use voice commands to control your device. For more information about the enhanced voice commands supported by your device, see "Voice dialing", on page 42.

To activate enhanced voice commands for starting applications and profiles, you must open the Voice cm. application and its Profiles folder. Press , and select Tools > Voice cm. > Profiles; the device creates voice tags for the applications and profiles. To use enhanced voice commands, press and hold in the standby mode, and say a voice command. The voice command is the name of the application or profile displayed in the list.

Tip! Alternatively, to define the side key to use voice commands, see "General", on page 80.

To add more applications to the list, select Options > New application. To add a second voice command that can be used to start the application, select Options > Change command, and enter the new voice command as text. Avoid very short names, abbreviations, and acronyms.

To listen to the synthesized voice tag, select Options > Playback.

To change voice command settings, select Options > Settings. To switch off the synthesizer that plays recognized voice tags and commands in the selected

device language, selectrecognition learning (fothe device has changed

Applica

Press , and select Totwo types of application• J2ME™ applications

extension .jad or .jar• Other applications a

Symbian operating shave the .sis extensispecifically designedproviders will often of this product: N71

Installation files may becompatible computer, dsent to you in a multimattachment, or using BlYou can use Nokia Applto install an applicationMicrosoft Windows Expto a compatible memor


Tool

s

91

e server. You obtain these from acturer of the application.on file, press , and select ternatively, search the device card (if inserted) in File mgr., or ssag. > Inbox that contains an

ptions > Install. In other the installation file, and press llation.e device shows information the installation. If you are on without a digital signature or ce displays a warning. Continue are sure of the origin and ation.

ation, locate it in the menu, and

ction and to view extra lication, select Options > Go to

.

kages are installed or removed > View log.

log to a help desk so that they or removed, select Options > sage or Via e-mail (available settings are in place).


Copyright © 20

Install applications and software indicates a .sis application, a Java application, that the application is not fully installed, and that the application is installed on the memory card.


Before installation, note the following:• To view the application type, version number, and the

supplier or manufacturer of the application, select Options > View details.

• To display the security certificate details of the application, select Options > View certificate. See "Certif. management", on page 86.

• If you install a file that contains an update or repair to an existing application, you can only restore the original application if you have the original installation file or a full back-up copy of the removed software package. To restore the original application, remove the application, and install the application again from the original installation file or the back-up copy.

• The .jar file is required for installing Java applications. If it is missing, the device may ask you to download it. If there is no access point defined for the application, you are asked to select one. When you are downloading the .jar file, you may need to enter a user name and

password to access ththe supplier or manuf

1 To locate an installatiTools > App. mgr.. Almemory or a memory open a message in Meinstallation file.

2 In App. mgr., select Oapplications, scroll to

to start the instaDuring installation, thabout the progress ofinstalling an applicaticertification, the deviinstallation only if youcontents of the applic

To start an installed applicpress .

To start a network conneinformation about the appweb address, if available

To see what software pacand when, select Options

To send your installation can see what is installed Send log > Via text mesonly if the correct e-mail

92

software package depends on the that you removed, the other may stop working. Refer to the f the installed software package

gs and from the following:

Select to check the online lling an application.

Set the default address used when ates.

may require a phone call, a network connection to a specific

ading extra data or components. In w, scroll to an application, and settings to change settings related ion.

ion keys

ts activation keys stored in your lect Tools > Actv. keys and from



Tool

s Important: Your device can only support one antivirus application. Having more than one application with antivirus functionality could affect performance and operation or cause the device to stop running.

Installation files (.sis) of applications that are stored in the device memory will remain in the memory after the application has been installed to a compatible miniSD card. Stored installation files may consume large amounts of device memory, leaving insufficient memory to store new applications, messages and other files. To help prevent this, first backup the installation files to a compatible PC using Nokia PC Suite, then remove the installations file from the device memory using File mgr. (see "File manager", on page 5).

Remove applications and softwareScroll to a software package, and select Options > Remove. Select Yes to confirm.

If you remove software, you can only reinstall it if you have the original software package or a full backup of the removed software package. If you remove a software package, you may no longer be able to open documents created with that software.

Note: If another software packagesoftware packagedocumentation ofor details.

SettingsSelect Options > Settin

Online certif. check —certificates before insta

Default web address —checking online certific

Some Java applicationsmessage to be sent, or aaccess point for downlothe App. mgr. main vieselect Options > Suite to that specific applicat

Activat

To view the digital righdevice, press , and sethe following:


Tool

s

93


Copyright © 20

Valid keys — View keys that are connected to one or more media files and keys whose validity period has not started yet.

Invalid keys — View keys that are not valid; the time period for using the media file is exceeded or there is a protected media file in the device but no connected activation key.

Not in use — View keys that have no media files connected to them in the device.

To buy more usage time or extend the usage period for a media file, select an invalid activation key and Options > Get activation key. Activation keys cannot be updated if Services message reception is disabled. See "Service messages", on page 34.

To view detailed information, such as the validity status and ability to send the file, scroll to an activation key, and press .

94

etooth connection?

nnected to your device, you can end the other device, or by deactivating y. Select Connect. > Bluetooth >

llowing message is displayed: No fined. Define one in Services

wser settings. Contact your service ns.

mudgy?

e plastic films covering the display hat the camera lens protection

olored, or bright dots appear on the rn on my device?

of this type of display. Some displays dots that remain on or off. This is



Trou

bles

hoot

ing Troubleshooting

Q&AAccess codes

Q: What is my password for the lock, PIN, or PUK codes?

A: The default lock code is 12345. If you forget or lose the lock code, contact your device dealer. If you forget or lose a PIN or PUK code, or if you have not received such a code, contact your service provider. For information about passwords, contact your access point provider, for example, a commercial Internet service provider (ISP), service provider, or network operator.

Application not responding

Q: How do I close an application that is not responding?

A: To open the application switching window, press and hold . Scroll to the application, and press to close the

application.

Bluetooth connectivity

Q: Why can’t I find my friend’s device?

A: Check that both devices have activated Bluetooth connectivity. Check that the distance between the two devices is not over 10 meters (33 feet) and that there are no walls or other obstructions between the devices. Check that the other device is not in hidden mode. Check that both devices are compatible.

Q: Why can’t I end a Blu

A: If another device is cothe connection usingBluetooth connectivitOff.

Browser services

Q: What do I do if the fovalid access point desettings.?

A: Insert the correct broprovider for instructio

Camera

Q: Why do images look s

A: Remove the protectivand camera. Ensure twindow is clean.

Display

Q: Why do missing, discscreen every time I tu

A: This is a characteristicmay contain pixels ornormal, not a fault.


Trou

bles

hoot

ing

95

allation file from the device e "File manager", on page 5).

a before deleting it?

ne of the following methods:

ake a backup copy of all data to a

mail address; then save the images

oth connectivity to a compatible

tible memory card.

ntact?

ot have a phone number or an missing information to the ts.

the device cannot receive a cause memory is full?

needed is indicated in the error memory to retrieve message. . To view what kind of data you

emory the different data groups anager > Options > Memory


Copyright © 20

Log

Q: Why does the log appear empty?

A: You may have activated a filter, and no communication events fitting that filter have been logged. To see all events, select My own > Log, press and select Options > Filter > All communication.

Memory low

Q: What can I do if my device memory is low?

A: You can delete the following items regularly to avoid memory getting low:

• Messages from Inbox, Drafts, and Sent folders in Messag.• Retrieved e-mail messages from the device memory• Saved browser pages• Images and photos in Gallery

To delete contact information, calendar notes, call timers, call cost timers, game scores, or any other data, go to the respective application to remove the data. If you are deleting multiple items and one of the following notes are shown: Not enough memory to perform operation. Delete some data first. or Memory low. Delete some data., try deleting items one by one (starting from the smallest item).

Installation files (.sis) of applications that are stored in the device memory remain in the memory after the application has been installed to a compatible miniSD card. Remove such installation files from the device memory. To do this, first backup the installation file to a compatible PC using Nokia PC

Suite, then remove the instmemory using File mgr. (se

Q: How can I save my dat

A: Save your data using o

• Use Nokia PC Suite to mcompatible computer.

• Send images to your e-to your computer.

• Send data using Bluetodevice.

• Store data on a compa

Messaging

Q: Why can’t I select a co

A: The contact card does ne-mail address. Add thecontact card in Contac

Multimedia messaging

Q: What should I do whenmultimedia message be

A: The amount of memorymessage: Not enough Delete some data firsthave and how much mconsume, select File mdetails.

96



Trou

bles

hoot

ing Q: The note Retrieving message is shown briefly. What is

happening?

A: The device is trying to retrieve a multimedia message from the multimedia messaging center. Check that the settings for multimedia messaging are defined correctly and that there are no mistakes in phone numbers or addresses. Select Messaging > Options > Settings > Multim. msg..

PC connectivity

Q: Why do I have problems in connecting the device to my PC?

A: Make sure that Nokia PC Suite is installed and running on your PC. See the user guide for Nokia PC Suite on the CD-ROM. For further information on how to use Nokia PC Suite, see the help function on Nokia PC Suite or visit the support pages at www.nokia-asia.com.

Q: Can I use my device as a fax modem with a compatible PC?

A: You cannot use your device as a fax modem. However, with call diverting (network service), you can divert incoming fax calls to another phone number.

Q: Why does sending images and videos fail, when I send them to a compatible PC that has been successfully paired with my device?

A: The PC may reject the images and videos. Check the manual of the PC’s operating system for the correct configuration of PIM settings.

Batt

ery

info

rmat

ionBattery inform

Charging and dischaYour device is powered by a rechargeperformance of a new battery is achthree complete charge and dischargebe charged and discharged hundredseventually wear out. When the talk anoticeably shorter than normal, replaNokia approved batteries, and recharNokia approved chargers designated

Unplug the charger from the electricwhen not in use. Do not leave fully chto a charger, since overcharging may unused, a fully charged battery will l

If the battery is completely dischargeminutes before the charging indicatoor before any calls can be made.

Use the battery only for its intendedcharger or battery that is damaged.

Do not short-circuit the battery. Acccan occur when a metallic object succauses direct connection of the positterminals of the battery. (These look battery.) This might happen, for examspare battery in your pocket or purseterminals may damage the battery o

ationrgingable battery. The full

ieved only after two or cycles. The battery can of times but it will nd standby times are

Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing.

Copyright © 2006 Nokia. All rights reserved. 97

ce the battery. Use only ge your battery only with for this device.

al plug and the device arged battery connected shorten its lifetime. If left ose its charge over time.

d, it may take a few r appears on the display

purpose. Never use any

idental short-circuiting h as a coin, clip, or pen ive (+) and negative (-) like metal strips on the ple, when you carry a

. Short-circuiting the r the connecting object.

Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.

Nokia battery authentication guidelinesAlways use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging and inspect the hologram label using the following steps:

Copyright © 2006 Nokia. All

Batt

ery

info

rmat

ion

98

Successful completion of the fourassurance of the authenticity of treason to believe that your batteryNokia battery, you should refrain fcannot be verified, return the batte

Authenticate hologram1 When looking at the hologram

the label, you should see the Nokia connecting hands symbfrom one angle and the NokiaOriginal Enhancements logo when looking from another an

steps is not a total he battery. If you have any is not an authentic original rom using it. If authenticity ry to the place of purchase.

on

ol

2 When you angle the hologram left, right, down, and up, you should see 1, 2, 3, and 4 dots on each side respectively.

rights reserved.

gle.

Batt

ery

info

rmat

ionWhat if your battery is not authen

If you cannot confirm that your Nokhologram on the label is an authenticnot use the battery. The use of a batby the manufacturer may be dangeroperformance and damage to your devIt may also invalidate any approval ordevice.

To find out more about original Nokiwww.nokia-asia.com/batterycheck.

tic?

ia battery with the Nokia battery, please do tery that is not approved us and may result in poor ice and its enhancements. warranty applying to the

a batteries, visit

Copyright © 2006 Nokia. All rights reserved. 99

10

HS-26W

AD-15

MD-1

LPS-4

CK-1W

N616

HSU-4

ndsfree HF-6W

DC-4

CR-39

CA-53

MU-18

MU-23

PD-2



Nok

ia o

rigin

al e

nhan

cem

ents

0

Nokia original enhancements

A new extensive range of enhancements is available for your phone. Select the enhancements which accommodate your specific communication needs. List of compatible enhancements:

Audio

Headset HS-5

Boom Headset HDB-4

Fashion Stereo Headset HS-3

Fashion Stereo Headset HS-31

Activity Headset HS-8

Display Headset HS-6

Classic Stereo Headset HS-23

Music Stereo Headset HS-20

Wireless Headset HDW-3

Wireless Boom Headset HS-4W

Wireless Headset HS-11W

Wireless Clip-on Headset HS-21W

Wireless Headset HS-36W

Wireless Headset

Audio Adapter

Music Stand

Loopset

Car

Wireless Car Kit

Car Kit

Car Handset

Wireless Plug-in Car Ha

Mobile Charger

Universal holder

Data

Connectivity Cable

miniSD card 256MB

miniSD card 512MB

Imaging

Camera Flash


Nok

ia o

rigin

al e

nhan

cem

ents

101

imes may occur depending on age settings, usage style and

Headset HS-26W

me# Standby#

2 - 4 hrs up to 7 - 9 days


Copyright © 20

Messaging

Wireless Keyboard SU-8W

Power

Travel Charger AC-4

Compact Charger AC-3

Charger Adapter CA-44

Battery BL-5C

Some of the enhancements are described in detail below.

For availability of the enhancements, please check with your local dealer. A few practical rules for enhancements operation:

• Keep the enhancements out of small children’s reach.

• When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord.

• Check regularly that all mobile phone equipment in a vehicle dismounted and operating properly.

Use only batteries, chargers and enhancements approved by the phone manufacturer. The use of any other types may invalidate any approval or warranty applying tithe phone, and may be dangerous.

Battery

# Variation in operation tSIM card, network and usenvironments.

Nokia Wireless

Type Tech Talkti

BL-5C Li-Ion up to

10

s Headset HS-36W

hone. The Nokia Wireless Headset sfree functionality in one

o-use package.

handsfree control for mobile

g) and comfortable to wear with p

time and up to 110 hours standby



Nok

ia o

rigin

al e

nhan

cem

ents

2

Easy to use, versatile, and elegant: the Nokia Wireless Headset HS-26W is an ideal handsfree solution for those who want good value for money.

Key Features:

• Classic style with Bluetooth wireless technology

• Elastic earhook fits comfortably over either ear

• Convenient, large answer/end button

• Handy volume control - adjust audio levels easily from the headset

• Controls: answer/end call, redial, activate voice dial, mute, volume control, switch between phone and handsfree modes

• Choose between two colors: black and white

• Up to 5 hours of talk time and up to 150 hours standby

Nokia Wireles

Forget looking for the pHS-36W gives you handcomfortable and easy-t

Key Features:

• Convenient wirelessphones

• Lightweight (only 20an adjustable earloo

• Up to 6 hours of talk


Nok

ia o

rigin

al e

nhan

cem

ents

103


Copyright © 20

Nokia Universal Holder CR-39

It supports a broad variety of Nokia and other manufacturers mobile devices. It holds your compatible mobile device firmly in place and gives you flexibility to choose a compatible device today and tomorrow.

The new stylish design will complement your mobile phone. Insert your compatible mobile device into the Nokia Universal Holder and simply fasten it by pressing the clamps - release it by depressing a button.

10

ce. Paint can clog the moving parts peration.cloth to clean any lenses (such as sor, and light sensor lenses). or an approved replacement d antennas, modifications, or mage the device and may violate radio devices.

p of data you want to keep (such as r notes) before sending your device to

ons apply equally to your device, nhancement. If any device is not to the nearest authorized service



Care

and

mai

nten

ance

4

Care and maintenanceYour device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage.• Keep the device dry. Precipitation, humidity and all types

of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.

• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.

• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.

• Do not attempt to open the device other than as instructed in this guide.

• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.

• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.

• Do not paint the deviand prevent proper o

• Use a soft, clean, dry camera, proximity sen

• Use only the suppliedantenna. Unauthorizeattachments could daregulations governing

• Use chargers indoors.• Always create a backu

contacts and calendaa service facility.

All of the above suggestibattery, charger, or any eworking properly, take it facility for service.


Addi

tiona

l saf

ety

info

rmat

ion

105

smitting equipment, including fere with the functionality of dical devices. Consult a physician medical device to determine if d from external RF energy or if you off your device in health care ions posted in these areas instruct ealth care facilities may be using nsitive to external RF energy.

anufacturers recommend that a .3 centimeters (6 inches) be less phone and a pacemaker to e with the pacemaker. These istent with the independent dations of Wireless Technology emakers should: more than 15.3 centimeters cemaker;a breast pocket; and ar opposite the pacemaker to

for interference.


Copyright © 20

Additional safety informationYour device and its enhancements may contain small parts. Keep them out of the reach of small children.

Operating environment

Remember to follow any special regulations in force in any area and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 2.2 centimeters (7/8 inches) away from the body. When a carry case, belt clip or holder is used for body-worn operation, it should not contain metal and should position the device the above-stated distance from your body.

In order to transmit data files or messages, this device requires a good quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure the above separation distance instructions are followed until the transmission is completed.

Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased.

Medical devices

Operation of any radio tranwireless phones, may interinadequately protected meor the manufacturer of thethey are adequately shieldehave any questions. Switchfacilities when any regulatyou to do so. Hospitals or hequipment that could be se

Pacemakers Pacemaker mminimum separation of 15maintained between a wireavoid potential interferencrecommendations are consresearch by and recommenResearch. Persons with pac• always keep the device

(6 inches) from their pa• not carry the device in • hold the device to the e

minimize the potential

10

lying may be prohibited. Switch off ing an aircraft. The use of wireless may be dangerous to the operation e wireless telephone network, and

e environments

hen in any area with a potentially d obey all signs and instructions. ospheres include areas where you d to turn off your vehicle engine. d cause an explosion or fire resulting eath. Switch off the device at near gas pumps at service stations. e use of radio equipment in fuel ibution areas, chemical plants or s are in progress. Areas with a osphere are often but not always ude below deck on boats, chemical ies, vehicles using liquefied ropane or butane), and areas where ls or particles such as grain, dust or



Addi

tiona

l saf

ety

info

rmat

ion

6

If you suspect interference, switch off your device and move the device away.

Hearing aids Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer or its representative of your vehicle or any equipment that has been added.

Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.

Using your device while fyour device before boardteledevices in an aircraftof the aircraft, disrupt thmay be illegal.

Potentially explosiv

Switch off your device wexplosive atmosphere anPotentially explosive atmwould normally be adviseSparks in such areas coulin bodily injury or even drefuelling points such as Observe restrictions on thdepots, storage, and distrwhere blasting operationpotentially explosive atmclearly marked. They incltransfer or storage facilitpetroleum gas (such as pthe air contains chemicametal powders.


Addi

tiona

l saf

ety

info

rmat

ion

107


Copyright © 20

Emergency calls

Important: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies.

To make an emergency call: 1 If the device is not on, switch it on. Check for adequate

signal strength. Some networks may require that a valid SIM card is properly inserted in the device.

2 Press as many times as needed to clear the display and ready the device for calls.

3 Enter the official emergency number for your present location. Emergency numbers vary by location.

4 Press the key.

If certain features are in use, you may first need to turn those features off before you can make an emergency call. Consult this guide or your service provider for more information.

When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so.

10

this device when tested for use at

nding on national reporting and the network band. Use of device

ents may result in different SAR formation may be provided under ww.nokia-asia.com.

e devices used by the public is 0 grams of body tissue. The

substantial margin of safety to give the public and to account for any ts. SAR values may vary depending

uirements and the network band. For regions, please look under product ia.com.



Addi

tiona

l saf

ety

info

rmat

ion

8

Certification information (SAR)THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES

Your mobile device is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio frequency (RF) recommended by international guidelines (ICNIRP). These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The guidelines include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.

The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit stated in the international guidelines is 2.0 watts/kilogram (W/kg)*. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a base station, the lower the power output of the device.

The highest SAR value forthe ear is 0.41 W/kg.

SAR values may vary depetesting requirements andaccessories and enhancemvalues. Additional SAR inproduct information at w

* The SAR limit for mobil2.0 W/kg averaged over 1guidelines incorporate a additional protection forvariations in measuremenon national reporting reqSAR information in otherinformation at www.nok

06 Nokia. All rights reserved. 109

Aaccess

seactivat

wactivatalarms

alapplica

inJa

BbackinBatterBatter

tyBlueto

codehepasesw

bookm

adjusting video recorder settings 16

edit videos 19flash 11image setup settings 10, 11, 16saving video clips 15self-timer 12sending images 10sequence mode 12still image camera settings 12icates 86fication information (SAR) 108

See instant messaging screenSee standby mode 3alarm 3settings 4s 85lock codePIN code 86PIN2 code 86security code 86

Ind


Copyright © 20

points 82ttings 83e loudspeakerith closed cover 48ion keys 92

arm clock 3tions

stalling 91va 90

g up 4y 101y informationpe 101oth 73nnecting two devices, pairing 75vice address 75adset 89iring 75curity 74itching off 76arks 54

brightnessdisplay 81setting in camera 10, 15

Ccache, clearing 56calendar

create entries 66synchronizing PC Suite 66

call registerSee log

callsdialled numbers 49duration 49international 41received 49settings 81settings for call forwarding 88transferring 48

cameraadjusting brightness 10, 15adjusting colour and lighting 11, 16adjusting flash settings 10

certifCertichat

clear

clock

code

ex

11

icators 2tant messaging 62

blocking 63connecting to a server 62recording messages 63sending instant messages 63

ernetSee Web

ernet access points (IAP)See access points

aSee applications

k code 86

erasing contents 50filtering 50

duration 50pset settings 89dspeaker 3

ilbox 34automatic retrieving 35


Copyright © 2006 Nokia. All rights reserved.0

computer connections 77conference call 41connection settings 82contact cards 51

inserting pictures 51sending 51storing DTMF tones 48

copyingcontacts between the SIM card

and device memory 52copyright protection

see activation keys

Ddata connections

details 77ending 78indicators 2

date 3device manager 78digital rights management, DRM

see activation keys

Eediting videos

adding effects 19adding sound clips 19adding transitions 19custom video clips 19

e-mail 31automatic retrieving 35opening 35remote mailbox 34retrieving from mailbox 34settings 38viewing attachments 35

Ffile formats

.jad 90

.jar 90, 91

.sis 90RealPlayer 24

file manager 5fixed dialing 52FM radio 59

Ggallery

ordering files in albums 22presentations 21

Hhandsfree

see loudspeakerheadset settings 89help application 8

Iindins

Int

Int

JJav

Lloclog

logloolou

Mma

06 Nokia. All rights reserved. 111

ce commands 29cesbrowser 54gs

access codes 85access points 83Bluetooth connectivity 73calendar 67call forwarding 88call restriction 88certificates 86cover display 81data connections 82date and time 85display 81IM 62, 64language 80lock code 86original settings 80personalizing the phone 70PIN code 86screen saver 81UPIN code 86UPUK code 86cuts 6


Copyright © 20

media filesfast forward 24file formats 24mute sound 24rewind 24

memoryclearing memory 6, 49viewing memory consumption 6

memory card 4menu, rearranging 70messaging

e-mail 31multimedia messages 31text messages 31

movies, muveescustom muvees 26quick muvees 26

multimedia messages 31music player 58mute sound 24

NNokia original enhancements 100

Ppacket data connections

settings 84PC connections 77

PC Suitecalendar data 66synchronization 77transferring images to a PC 18transferring music files to your

memory card 58viewing device memory data 3, 6

personalization 71phonebook

See contact cardsPIN code 86profiles 70

Rradio 59remote mailbox 34remote SIM mode 74ringing tones

personal ringing tone 53receiving in a text message 33

Ssecurity code

See lock codesending

contact cards, business cards 51images 10video clips 21

serviServi

settin

short

11


Copyright © 2006 Nokia. All rights reserved.2

SIM cardcopying names and

numbers to phone 52messages 36names and numbers 52

sis file 90snooze 3software

transferring a file to your device 90sound clips 18sounds

muting a ringing tone 47recording sounds 69

speed dialing 42standby mode 70SVG files 21synchronization 78

Ttext messages 31themes 71time 3transferring content from

another device 1

UUPIN code 86UPUK code 86USSD commands 29

Vvideo call 43

answering 47rejecting 47

video clips 18video player

See RealPlayerVisual Radio 59

viewing content 61visual service ID 61

voice commands 90voice dialing 42voice mailbox 41

changing the phone number 9, 41forwarding calls to

voice mailbox 88voice messages 41voice tags 90

making calls 42volume control 3

during a call 41loudspeaker 3

WWeb

access points, see access points

User’s Guide for Nokia N71nds2.webapps.microsoft.com/.../Nokia_N71_APAC_UG_en.pdfYour Nokia N71 1...

Documents

Transcript of User’s Guide for Nokia N71nds2.webapps.microsoft.com/.../Nokia_N71_APAC_UG_en.pdfYour Nokia N71 1...