Unit 4 SUBSTRUCTURE DESIGN - FLOORS, WALLS & BASEMENTS
description
Transcript of Unit 4 SUBSTRUCTURE DESIGN - FLOORS, WALLS & BASEMENTS
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 1
School of the Built Environment
Construction Technology D19SC
Unit 4
SUBSTRUCTURE DESIGN -FLOORS, WALLS & BASEMENTS
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 2
School of the Built Environment
Construction Technology D19SC
Floors, walls at substructure level and basements are at the interface between the ground under the building and the building interior.
Basic functional requirements are to be structurally sound and to provide a waterproof barrier between the ‘wet’ supporting ground and the dry interior of the building. Generally waterproofing barriers come in three forms.
1.DPCs Damp proof courses2.DPMs Damp proof membranes3.Tanking
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 3
School of the Built Environment
Construction Technology D19SC
In addition structures below the ground may also need to withstand the horizontal pressure of the soil and sometimes water. In such situations the structure acts as a retaining wall.
At ground level, floors and their surrounding structures not only need to stop moisture entering the building and support the surrounding soil, but like foundations the floors need to be stable. Floors need to be able to support all applied loads without settlement.
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 4
School of the Built Environment
Construction Technology D19SC
GROUND FLOORS
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 5
School of the Built Environment
Construction Technology D19SCTypical suspended ground floor construction
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 6
School of the Built Environment
Construction Technology D19SC
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 7
School of the Built Environment
Construction Technology D19SC
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 8
School of the Built Environment
Construction Technology D19SC
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 9
School of the Built Environment
Construction Technology D19SC
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 10
School of the Built Environment
Construction Technology D19SC
150mm
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 11
School of the Built Environment
Construction Technology D19SC
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 12
School of the Built Environment
Construction Technology D19SC
Pre-cast concrete ground floor with timber decking and insulation
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 13
School of the Built Environment
Construction Technology D19SC
GROUND SUPPORTED SLABS
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 14
School of the Built Environment
Construction Technology D19SC
GROUND SUPPORTED SLABS
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 15
School of the Built Environment
Construction Technology D19SC
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 16
School of the Built Environment
Construction Technology D19SC
Ground supported concrete slab withinsulation located below the screed
Ground supported concrete slab withinsulation located below the slab
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 17
School of the Built Environment
Construction Technology D19SC
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 18
School of the Built Environment
Construction Technology D19SC
Ground supported slab - with the feel of a suspended floor
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 19
School of the Built Environment
Construction Technology D19SC
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 20
School of the Built Environment
Construction Technology D19SC
Large area construction. In the background (left) a laser screed machine is spreading and levelling the concrete. To the right a dry shakefinish is being spread mechanically. In the foreground, the concrete placed several hours earlier is being finished by a power float and a ride-on power trowel.
Concrete industrial ground floors : Concrete Society
Larger ground supported floors
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 21
School of the Built Environment
Construction Technology D19SC
Typical slab construction.
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 22
School of the Built Environment
Construction Technology D19SC
Long strip construction, allowing access for levelling using a highway straightedge.
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 23
School of the Built Environment
Construction Technology D19SC
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 24
School of the Built Environment
Construction Technology D19SC
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 25
School of the Built Environment
Construction Technology D19SC
Sawn free-movement joint.
Sawn restrained-movement joint (shown with fabric).
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 26
School of the Built Environment
Construction Technology D19SC
Penetration of the floor slab
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 27
School of the Built Environment
Construction Technology D19SC
BASEMENTS
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 28
School of the Built Environment
Construction Technology D19SC
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 29
School of the Built Environment
Construction Technology D19SC
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 30
School of the Built Environment
Construction Technology D19SC
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 31
School of the Built Environment
Construction Technology D19SC
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 32
School of the Built Environment
Construction Technology D19SC
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 33
School of the Built Environment
Construction Technology D19SC
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 34
School of the Built Environment
Construction Technology D19SC
Unit 4 SUBSTRUCTURE DESIGN – WALLS FLOORS & BASEMENTS 35
School of the Built Environment
Construction Technology D19SC