Unique Irish Standards held in James Joyce Library Irish Standards held in James Joyce Library ......

Guide created: 3rd August 2011

Unique Irish Standards held in James Joyce Library

Please inquire at Information Desk.

07/02/2012 Unique Irish standards held in JJL Guide 17 Page | 2

ID Standard No

Part Year Title Notes

3 2 1 1982 Sheeting, Sheets and Pillow Slips made of cotton

4 2 2 1982 Sheeting, sheets and pillow slips made of materials other than cotton

5 3 1972 Concrete roofing tiles

6 5 1 1990 Aggregates for concrete Part 1 : Specification

7 5 2 1990 Aggregates for concrete Part 2 : Sampling

8 5 3.0 1990 Aggregates for concrete Part 3.0 : Testing - General

9 5 3.1 1990 Aggregates for concrete Part 3.1 : Method of test for the determination of the soundness of coarse aggregate

10 5 3.2 1990 Aggregates for concrete Part 3.2 : Method of test for the determination of the flakiness index of coarse aggregate

11 5 3.3 1990 Aggregates for concrete Part 3.3 : Method of test for the determination of the shell content of coarse aggregate

12 5 3.4 1990 Aggregates for concrete Part 3.4 : Method of test for the determination of the percentage of clay lumps and friable particles in coarse aggregate

13 5 3.5 1990 Aggregates for concrete Part 3.5 : Method of test for the determination of clay, silt and dust in aggregate

14 5 3.6 1990 Aggregates for concrete Part 3.6 : Method of test for organic impurities in fine aggregate

15 5 3.7 1990 Aggregates for concrete Part 3.7 : Method of test for the effect of organic impurities in fine aggregate on mortar strength

16 5 3.8 1990 Aggregates for concrete Part 3.8 : Method of test for the determination of the chloride content of aggregate

17 5 3.9 1990 Aggregates for concrete Part 3.9 : Method of test for the determination of the 'Ten per cent Fines' value

18 5 3.10 1990 Aggregates for concrete Part 3.10 : Method of test for the determination of aggregate crushing value

19 5 3.11 1990 Aggregates for concrete Part 3.11 : Method of test for the determination of Los Angeles abrasion value


ID Standard No


20 5 3.12 1990 Aggregates for concrete Part 3.12 : Method of test for the determination of bulk density, voids and bulking

21 5 3.13 1990 Aggregates for concrete Part 3.13 : Method of test for the determination of particle size

22 5 3.14 1990 Aggregates for concrete Part 3.14 : The description and classification of aggregates

23 5 3.15 1990 Aggregates for concrete Part 3.15 : Classification of particle shape and surface texture of aggregate

24 5 3.16 1990 Aggregates for concrete Part 3.16 : Method of test for the determination of the volume voids

25 5 3.17 1990 Aggregates for concrete Part 3.17 : Method of test for the determination of relative density and water absorption

26 5 3.18 1990 Aggregates for concrete Part 3.18 : Method of test for the determination of moisture content of aggregate

27 5 3.19 1990 Aggregates for concrete Part 3.19 : Method of test for determining the amount of acid soluble material in fine aggregate

28 6 2004 Concrete sewer pipes

29 7 1 1982 Asbestos-cement slates

30 7 2 1983 Symmetrical asbestos-cement corrugated sheets

31 8 1973 Hydrated lime for building purposes

32 9 1976 Galvanised cisterns for domestic water supply

33 16 1958 Knotting

34 17 1960 Gold size

35 20 1 1987 Concrete building blocks Part 1, Normal density blocks

Duplicate available

36 24 1973 Test sieves

37 26 1982 Woollen blankets

38 27 1 1975 Gypsum plasters (excluding premixed lightweight plasters)

39 27 2 1975 Gypsum plasters (Premixed lightweight plasters)

40 27 3 1987 Gypsum plasters (Premixed base coat plasters)

41 28 1988 Linseed oil putty for use in wooden frames Supersedes I.S 28 : 1964


ID Standard No


42 32 1963 Hard gloss and enamel paints and appropriate undercoats

43 36 1 1986 Bitumen roofing felts Part 1, Fibre and glass fibre based felts

44 36 2 1987 Bitumen roofing felts Part 2, Polyester based felts

45 41 1975 Gypsum plasterboard

46 48 1985 Flush wood doors - Timber Core

47 49 1 1982 Pre-shrunk cotton cloth for workwear

48 49 2 1982 Pre-shrunk polyester/cotton cloth for workwear

49 50 1987 Hollow-back-type spades and shovels

50 57 1 1987 Damp-proof courses Part 1, Bitumen damp-proof courses

51 57 2 1987 Damp-proof courses Part 2, Polyethylene damp-proof courses

52 58 1953 (Clayware land drainage pipes) Order, 1953

53 59 1953 (Pressed steel rainwater goods) Order, 1953

54 63 1 1976 Wood windows and wood surrounds for metal windows - Dimensions

55 63 2 1984 Wood windows - Construction

56 66 1955 Determination of the percentage of fat in milk

57 69 1955 Determination of the percentage of fat in cheese

58 65 1973 Mastic asphalt for building

59 70 1980 Water-closet cisterns for domestic use

60 89 1958 Window sills

61 89 1 1981 Window sills

62 91 1983 Clay building bricks

63 96 1976 Moisture content of timber for building

64 97 1986 Wood screws

65 97 2 1988 Wood screws Part 2, Screws with rolled threads

66 105 1961 Wire and cut nails for building purposes

67 105 1 1977 Wire and cut nails for building purposes (Metric)

68 106 1970 Clayware sewer and drain pipes

69 109 1984 Commercial envelopes

70 121 1980 Galvanized barbed wire

71 123 1964 Unplasticized PVC pipes for cold water supply


ID Standard No


72 126 1982 Galvanized fencing wire

73 127 2002 Structural timber - Visual strength grading - Sawn softwoods with rectangular cross-section

74 129 1964 Emulsion paints

75 130 1980 Chain link fencing

76 131 1964 Treatment of timber with copper/chrome or copper/chrome/arsenic water-borne wood preservative

77 132 1964 Metal sinks for domestic purposes

78 132 1 1975 Stainless steel sinks for domestic purposes (Metric)

79 133 1984 Slide fasteners

80 134 1977 Polyethylene pipe type 32

81 135 1975 Polyethylene pipe type 50

82 136 1982 Concrete fence posts

83 137 1965 Anchorage points for seat belts in motor vehicles

84 140 1 1987 School furniture Part 1 Tables and chairs for schools

85 140 2 1987 School furniture Part 2 Performance requirements and tests for chairs for schools

86 140 3 1987 School furniture Part 3 Performance requirements and tests for tables for schools

87 144 1965 Office desks, tables and chairs

88 145 1985 Zinc and aluminium zinc coated corrugated steel sheets

89 146 1965 Pre-cast concrete kerbs, channels, edgings and quadrants

90 148 1988 Flammability and labelling requirements of fabrics and fabric assemblies used in children's nightwear

Duplicate available

91 151 1982 Beehives

92 152 1966 Baby harness

93 155 1976 Steel tubular framed field gates

94 156 1984 Cast iron baths

95 157 1984 Glass honey jars

96 158 1987 Closed string wood stairs

97 161 1975 Copper direct cylinders for domestic purposes

98 162 1968 Concrete marking posts

99 166 1972 Concrete surface water pipes


ID Standard No


100 167 1969 Electrical appliances - colour code for three core leads

101 168 1973 Ventilation of caravans and mobile homes

102 170 1970 Furniture

103 177 1980 Anti-intruder concrete fence posts

104 178 1973 Extruded rigid PVC corrugated sheeting

105 179 1973 Metal entrance gates

106 180 1973 Rating and dimensions of electrical socket-outlets for domestic and similar use

Duplicate available

107 185 1972 Cattle grids

108 188 1975 Asbestos-cement pressure pipes

109 189 1974 Concrete building bricks

110 190 1974 Calcium silicate building bricks

111 193 1986 Timber trussed rafters for roofs

112 194 1980 Method of production and supply of ready-mixed concrete

113 195 1976 Letter plates

114 196 1 1977 Wood doorsets - dimensions

115 196 4 1982 Panelled timber doors

116 196 5 1984 Flush wood door leaves - Paper core (External)

117 196 6 1986 Framed and sheeted timber doors (External)

118 197 1 1977 Metal windows - Dimensions

119 197 2 1985 Aluminium alloy windows

120 199 1987 Intruder alarm systems

121 200 1978 Qualification of welders for welding steel

122 201 1 2001 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V. Part 1: General requirements

123 201 2 2001 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V. Part 2: Test methods

124 201 3 2001 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V. Part 3: Single core non-sheathed cables for fixed wiring

125 201 4 2001 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V. Part 4: Sheathed cables for fixed wiring


ID Standard No


126 201 5 2001 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V. Part 5: Flexible cables (Cords)

127 201 7 2001 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V. Part 7: Cables with increased heat resistance

128 201 8 2001 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V. Part 8: Single core non-sheathed cables for decorative chains

129 201 9 2001 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V. Part 9: Cables for installation at low temperatures

130 201 10 2001 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V. Part 10: Extensible leads

131 201 11 2001 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V. Part 11: Cables for luminaries

132 201 12 2001 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V. Part 12: Heat resistant flexible cables (Cords)

133 201 13 2001 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V. Part 13: Oil resistant PVC sheathed cables with two or more conductors

134 202 1989 Rubber insulated cable and flexible cords of rated voltage up to and including 450/750V

135 202 2 2003 Cables of rated voltages up to and including 450/750V and having cross-linked insulation Part 2: Test Methods

136 202 6 2003 Cables of rated voltages up to and including 450/750V and having cross-linked insulation Part 6: Arc welding cables

137 202 7 2003 Cables of rated voltages up to and including 450/750V and having cross-linked insulation Part 7: Cables with increased heat resistance for internal wiring for a conductor temperature of 110 Degrees C

138 202 8 2003 Cables of rated voltages up to and including 450/750V and having cross-linked insulation Part 8: Polychloroprene or equivalent synthetic elastomer sheathed cable for use as decorative chains


ID Standard No


139 202 9 2003 Cables of rated voltages up to and including 450/750V and having cross-linked insulation Part 9: Single core non-sheathed cables for fixed wiring having low emission of smoke and corrosive gases

140 202 10 2003 Cables of rated voltages up to and including 450/750V and having cross-linked insulation Part 10: EPR insulated and polyurethane sheathed flexible cables

141 202 11 2003 Cables of rated voltages up to and including 450/750V and having cross-linked insulation Part: 11 EVA cords and flexible cables

142 203 1980 The erection of anti-intruder chain link fences

143 204 1981 Polyvinyl chloride (PVC0 insulated flexible cords of rated voltage 300/500V with conductors of cross-sectional area 1.25 mm squared

144 205 1981 Polyvinyl chloride (PVC) insulated flexible cords of rated voltage 300/500 V with conductors of cross-sectional area 1.25 mm squared

145 205 1 1980 Safety of household and similar electrical appliances Part 1, General requirements

146 205 2-2 1981 Safety of household and similar electrical appliances Part 2-2 Particular requirements for vacuum cleaners

147 205 2-3 1981 Safety of household and similar electrical appliances Part 2-3 Particular requirements for electric irons

148 205 2-5 1986 Safety of household and similar electrical appliances, Part 2-5, Particular requirements for dishwashers

149 205 2-7 1986 Safety of household and similar electrical appliances, Part 2-7, Particular requirements for washing machines

150 205 2-8 1986 Safety of household and similar electrical appliances, Part 2-8, particular requirements for shavers, hairclippers and similar appliances

151 205 2-9 1986 Safety of household and similar electrical appliances, Part 2-9, Particular requirements for toasters, grills, roasters and similar appliances


ID Standard No


152 205 2-11 1986 Safety of household and similar electrical appliances, Part2-11, Particular requirements for tumbler dryers

153 205 2-15 1986 Safety of household and similar electrical appliances, Part 2-15, Particular requirements for appliances for heating liquids

154 205 2-24 1981 Safety of household and similar electrical appliances Part 2-24 Particular requirements for refrigerators and food freezers

155 205 2-26 1984 Safety of household and similar electrical appliances Part 2-26, Particular requirements for clocks

156 205 2027 1981 Safety of household and similar electrical appliances Part 2-27, Particular requirements for ultra-violet and infra-red radiation skin treatment appliances for household use

157 205 2-28 1984 Safety of household and similar electrical appliances Part 2-28, Particular requirements for sewing machines

158 205 2-31 1981 Safety of household and similar electrical appliances, Part 2-31, Particular requirements for range hoods

159 205 2-32 1984 Safety of household and similar electrical appliances, Part 2-32, Particular requirements for massage appliances

160 205 2-33 1984 Safety of household and similar electrical appliances, Part 2-33, Particular requirements for coffee mills and coffee grinders

161 206 1980 Safety requirements for mains operated electronic and related apparatus for household and similar general use

162 207 1986 Liquefied petroleum gas cylinder neck valves

163 208 1986 Liquefied petroleum gas pressure regulators

164 209 1988 Safety requirements for perambulators and pushchairs

Supersedes I.S. 209: 1980

165 227 1987 Filing cabinets for the storage of foolscap documents and computer listing paper print-outs

166 228 1997 Monitoring centres for intruder alarm systems

167 229 1 & 2

1984 Passenger car tyres Part 2, Definitions Part 2, Markings


ID Standard No


168 230 1 1986 Safety Glass for Mechanically Propelled Vehicles Part 1: Laminated Safety Glass for Windscreens

169 232 1979 Electrical Apparatus for Potentially Explosive Atmospheres Oil Immersion 'O'

170 233 1979 Electrical Apparatus for Potentially Explosive Atmospheres Pressurized Apparatus 'p'

171 235 1979 Electrical Apparatus for Potentially Explosive Atmospheres Flameproof Enclosure 'd'

172 236 1979 Electrical Apparatus for Potentially Explosive Atmospheres Increased Safety 'e'

173 237 1979 Electrical Apparatus for Potentially Explosive Atmospheres Intrinsic Safety 'I'

174 238 1980 Copper Tubes

175 239 1987 Compression Tube Fittings of Copper and Copper Alloy For Water and Sanitation Purposes

176 240 1980 Precast Prestressed Concrete Units For Use In Composite Lintels

177 241 1 1988 Pressed Particle Boards Part 1, Wood Particle Boards

178 241 2 1988 Pressed Particle Boards Part 2, Methods of Test

179 242 1 & 2

1981 Fabricated Steel Manhole Covers and Frames Part 1: Pedestrian Loading Part 2: Limited Vehicle Loading

180 243 1981 Asbestos Cement Pipes and Joints For Sewerage and Drainage

181 244 1980 Requirements For Smoulder and Flame Resistant Upholstery

182 245 1981 Safety of Electric Fence Controllers

183 247 1981 Safety of Electrically Energized Office Machines

184 248 1981 Babies' Dummies

185 249 1993 Cattle Slats Duplicate available

186 250 1981 Safety Requirements for Children's Cots

187 251 1998 Winter Grade Gas Oil


ID Standard No


188 252 1982 Post and Rail Fencing - Concrete

189 253 1982 Toxicity of Pencils and Graphic Instruments

190 254 1983 Flame Resistance Requirements for Upholstery

191 255 1983 Precast Reinforced Concrete Lintels

192 256 1983 Sheep Fencing Wire And Sheep Fencing Made There from

193 257 1983 Quality Glossary

194 258 1 & 2

1984 Domestic Solid Fuel Cookers With Integral Boilers Part 1: Safety Requirements Part 2: General Requirements

195 259 1984 Flame Resistance Requirements For Curtain Material

196 260 1984 Mineral Fibre Mats For Thermal Insulation of Buildings

197 261 1984 Standard Specification (Cast Iron Road Furniture)

198 262 1 1984 Grey Iron and Ductile Iron Pipe Fittings

199 262 2 1986 Grey Iron and Ductile Iron Pipe Fittings Part 2: Grey Iron Plain Ended Pipe Fittings For Use With Asbestos-Cement Pressure Pipes

200 263 1984 Baths Made From Cast Acrylic Sheet

201 264 1984 Safety of Data Processing Equipment

202 265 1 & 2

2000 Installation of Gas Service Pipes Parts 1 and 2 (Fourth Edition)

203 266 1 1991 Polyethylene (Pe) Pipes and Fittings for Natural Gas, Manufactured Gas and Liquefied Petroleum Gas Part 1: Pipes (Edition 2)

204 266 2 1987 Polyethylene (Pe) Pipes and Fittings for Natural Gas, Manufactured Gas and Liquefied Petroleum Gas Part 2: Joints and Fittings, Fusion Jointed

205 266 3 1987 Polyethylene (PE) Pipes and Fittings For Natural Gas, Manufactured Gas and Liquefied Petroleum Gas Part 3: Butt fusion Tooling and Ancillary Equipment

206 267 1985 Burglar Resistant Cabinets For The Storage Of Controlled Drugs

207 269 1985 High Pressure Hot Water Car Washing Machines - Safety Criteria


ID Standard No


208 270 1968 Conductors of Insulated Cables

209 271 1988 PVC Insulation and Sheath of Electric Cables

210 272 1988 Cross-Linked Polyethylene Insulation of Electric Cables

211 273 1988 Cables with Polyvinyl Chloride (PVC) Or Crossed-Linked Polyethylene (XLPE) Insulation 600/1000 V and 1900/3300 V With And Without Steel Wire Armour (SWA)

212 274 1988 Code Designations, Identification and Markings For Electric Cables and Cords

213 275 1988 Rubber Insulation And Sheath Of Electric Cables

214 276 1994 Electric Cables For Fixed Wiring With Low Emission of Smoke And Corrosive Gases of Rated Voltage Up To And Including 450/750V

215 278 1985 Lighting Chains For Christmas Trees And Similar Decorative Purposes For Indoor Use

216 280 1 & 2

1986 Combined Appliances Gas Fire/Back Boiler Part 1 Essential Safety Requirements Part 2 Design, Construction and Performance

217 281 1 & 2

1986 Gas Fired Central Heating Boilers and Circulators Part 1 Essential Safety Requirements Part 2 Design, Construction and Performance

218 282 1 & 2

1986 Gas Fires Part 1 Essential Safety Requirements Part 2 Design, Construction and Performance

219 283 1 & 2

1987 Flueless Space Heaters (Excluding Catalytic Combustion Heaters) Using 3rd Family Gases

220 284 1 & 2

1987 Flueless Catalytic Combustion Heaters 3rd Family Gases

221 285 1 & 2

1987 Decorative Gas Log And Other Fuel Effect Appliances For 2nd And 3rd Family Gases. Part 1 Essential Safety Requirements Part 2 Design, Construction And Performance

222 286 1987 Safety Of Flueless Gas Fired Space Heaters 1st And 2nd Family Gases (Excluding Catalytic Combustion Devices)

223 287 1986 Traditional -Style Rising-Spindle Type Taps And Above-Ground Stopvalves

224 288 1987 Thermal Performance Requirements For Water Heaters And Space Heaters

225 289 1987 Thermal Insulation Of Pipes, Ducts And Storage Vessels


ID Standard No


226 290 1986 Portable Fire Extinguishers

227 291 2002 The Use, Siting, Inspection And Maintenance Of Portable Fire Extinguishers

supersedes I.S. 291 - 1986

228 292 1993 Acrylic Shower Trays

229 300 0 1987 Quality System Management

230 300 1 1987 Quality System Requirements - Demonstration Of Design, Development, Production And Installation Capability

231 300 2 1987 Quality System Requirements - Demonstration of Production And Installation Requirements

232 300 3 1987 Quality System Requirements - Demonstration Of Final Inspection And Test Capability

233 300 4 1986 Quality System Requirements - Demonstration Of Quality Management Capability In Service

234 301 1984 Sampling Procedures And Tables For Inspection By Attributes Guide To The Use Of Single Sampling Plans

235 302 1984 Quality Manual Preparation Guide

236 303 1984 Quality Audit

237 304 1984 Quidt To Quality Costs

238 305 1990 Guide To ISO 9000 Quality Management In The Service Industries

239 325 1 1986 Code Of Practice For Use Of Masonry Part 1: Structural Use Of Unreinforced Masonry

240 325 2 1995 Code Of Practice For Use Of Masonry Part 2: Masonry Construction

241 326 2004 Concrete, Code Of Practice For The Structural Use Of Concrete

242 326 2.1 1995 Concrete, Part 2.1: Guide to Specifying Concrete

Superseded by IS EN 206-1:2000

244 326 2.2 1995 Concrete. Part 2.2: Methods For Specifying Concrete Mixes

Superseded by IS EN 206 -1: 2000

245 326 2.3 1995 Concrete. Part 2.3: Specification For The Procedures To Be Used In Producing And Transporting Concrete

Superseded by IS EN 206-1: 2000

246 326 2.4 1995 Concrete. Part 2.4: Specification For The Procedures To Be Used In Sampling, Testing And Assessing Compliance Of Concrete

Superseded by IS EN 206-1: 2000

247 327 1990 Domestic Installations Using Liquefied Petroleum Gases (Edition 2)


ID Standard No


248 328 2003 Code of Practice For Gas Transmission Pipelines And Pipeline Installations (Edition 3.1)

249 329 2003 Gas Distribution Mains (Edition 2)

250 330 1987 Hermetically Sealed Flat Double Glazing Units

251 340 1994 Hygiene In The Catering Sector

252 341 1998 Hygiene In Food Retailing And Wholesaling

253 342 1997 Guide To Good Hygiene Practice For The Food Processing Industry In Accordance With The Council Directive 93/43/EEC On The Hygiene Of Foodstuffs

254 343 2000 Food Safety Management

255 344 2002 Hygiene For Domestic-Scale Food Production

256 360 2004 Code of Practice: Safe Use Of Cranes In The Construction Industry. Part 1: General

257 401 1997 Safety Requirements For Rewireable And Non-Rewireable 13A Fused Plugs For Normal And Rough Use Having Insulating Sleeves On Live And Neutral Pins

258 404 1987 LPG Fuelled Vehicles

259 405 1987 Toilet Paper

260 406 1987 Masonry Mortars

261 409 1988 Self-Contained Smoke Detectors For Private Dwellings

262 410 1988 Cycles - Safety Requirements For Bicycles

263 411 1997 13A Switched And Unswitched Socket Outlets

264 412 1988 Retreaded Passenger Car And Commercial Vehicle Tyres

265 415 1988 Fire Blankets

266 414 1988 Pork Sausages And Pork Sausage - Meat: Meat Content

267 416 1992 Irish Cream Liqueur

268 417 1988 Irish Coffee

269 418 1988 Ignitability Requirements Of Mattresses Tested With Secondary Ignition Sources Simulating Unknown Bedcovers

270 419 1988 Fire Safety Requirements For Components Of Furniture

271 420 2004 Pre-Cast Concrete Manholes

272 421 1997 Safety Requirements For Adaptors For Use With 13A Socket Outlets


ID Standard No


273 422 1989 Specification And Test Methods For Peat Based Products For Use In Horticulture

274 423 1989 Specification And Test Methods For Peat Fibre

275 424 1990 Unplasticized Polyvinylchloride (PVC-U) Pipes And Fittings For Buried Drainage And Sewage Systems - Specifications

Duplicate available

276 425 1 1990 Unplasticized Polyvinylchloride (PVC -U) Pipes And Fittings For Buried Drainage And Sewage Systems-Specifications

277 426 1990 Briquetted Peat Specification And Test Methods

278 427 1990 Matches

279 428 1991 Photoelectronic Controls For Road Lighting

280 432 2005 Packaged Water

281 433 1 1999 Information Technology - Irish 7-Bit Coded Character Sets

282 434 1999 Information Technology - 8-Bit Single-Byte Coded Character Set For Ogham

283 435 1 2001 Timber Post And Rail Roadside Fencing Part 1: Materials

284 435 2 2001 Timber Post and Rail Roadside Fencing Part 2: Erection of Fencing By Excavation For Posts

285 435 3 2001 Timber Post And Rail Roadside Fencing - Part 3: Erection of Fencing By Driving Of Posts

286 436 2001 Farm Fencing - Timber Post and Wire

287 444 1998 The Use Of Structural Timber In Buildings

288 500 1980 Basic Specification: Environmental Test Procedures

Cenelec Electronic Components Committee (CECC 00006: 1973)

289 501 1980 Basic Specification: Sampling Plans And Procedures For Inspection By Attributes

(CECC 00007:1978)

290 502 1985 CMOS Multiplying D/A Converters (Linear, Monolithic Silicon)

291 503 1980 Generic Specification: Electromechanical All-Or-Nothing Relays

(CECC 16000: 1979)

292 504 1980 Sectional Specification: Electromechanical All-Or-Nothing Relays

(CECC 16100:1979)


ID Standard No


293 505 1980 Blank Detail Specification: Electromechanical All-Or-Nothing Relays

(CECC 16101: 1980)

294 506 1980 Generic Specification: Dry Reed Make Contact Units

(CECC 19000:1978)

295 507 1980 Generic Specification: Radio Frequency Coaxial Connectors

(CECC 22000: 1979)

296 508 1980 Sectional Specification: Radio Frequency Coaxial Connectors Series BNC

(CECC 22120: 1979)

297 509 1980 Blank Detail Specification: Radio Frequency Coaxial Connectors Series BNC

(CECC 22121: 1979)

298 510 1980 Generic Specification: Inductor And Transformer Cores For Telecommunications

(CECC 25000: 1976)

299 511 1980 Sectional Specification: Magnetic Oxide Cores For Inductor Applications

(CECC 25100: 1976)

300 512 1980 Sectional Specification: Magnetic Oxide Cores For Linear Transformers

(CECC 25200: 1977)

301 513 1981 Methods Of Testing Windows Air Permeability Test

302 514 1981 Methods Of Testing Windows Wind Resistance Tests

303 515 1981 Methods Of Testing Windows Form Of Test Report

304 588 1982 Methods Of Testing Windows Watertightness Test Under Static Pressure

305 589 1985 Domestic Or Similar Electronic Equipment Interconnection Requirements: Peritelevision Connector

306 596 1985 Electrical Apparatus For Potentially Explosive Atmospheres Intrinsically Safe Electrical Systems '1'

307 644 1983 Domestic Cooking Appliances Burning Gas

308 645 1983 Gas Burning Appliances For Instantaneous Production Of Hot Water For Domestic Use

309 742 1 1986 Domestic-Solid-Fuelled Heating Appliances Part 1: Safety

310 745 1986 Machine-Graded Home Grown Timber Scaffold Boards

311 800 1987

312 800 1987 Safety Of Gas-Fired Infrared Space Heaters (Other than domestic radiant heaters)


ID Standard No


313 801 1 & 2

1987 Direct Gas Fired Forced Convection Air Heaters (60 kW to 2MW Input) For 2nd Family Gases Part 1: Essential Safety Requirements Part 2: Design, Construction And Performance

314 802 1 & 2

1987 Indirect Gas Fired Forced Convection Air Heaters (60 kW To 2MW Input) For 2nd Family Gases Part 1: Essential Safety Requirements Part 2: Design, Construction and Performance

315 803 1 & 2

1987 Gas Fired Fanned Circulation Ducted Air Heaters Part 1: Essential Safety Requirements Part 2: Design, Construction and Performance

316 804 1 & 2

1987 Gas Fired Hot Water Boilers With Inputs Of 60 kW to 2MW

317 805 1 & 2

1987 Gas Fired Storage Water Heaters Part 1: Essential Safety Requirements Part 2: Design, Construction and Performance

318 806 1988 Butane And Propane Gas - Burning Installations In Caravans, Non- Permanent Dwellings, Cabins And Transportable Site Offices

319 807 1, 2 & 3

1987 Gas Burners Part 1: General Requirements Part 2: Special Requirements - Burners Without Mechanical Air Supply Part 3: Special Requirements - Burners With Mechanical Air Supply

320 808 2002 CNG Fuel Systems For Vehicles

321 809 1989 Code of Practice for pressure-regulating installations for natural and manufactured gas for inlet pressures between 75 mbar and 7 bar (Second Edition)

322 810 1 & 2

1988 Butane And Propane Gas-Burning Installations In Boats, Yachts And Other Vessels Part 1: Essential Safety Requirements Part 2: Design and Performance

323 811 1 1988 Combined Appliances: Fanned-Circulation Ducted-Air Heaters/Circulators Part 1: Essential Safety Requirements

324 813 2002 Domestic Gas Installations

325 820 2000 Non-Domestic Gas Installations

326 999 2004 Guarding Security Services


ID Standard No


327 3210 1987 Code Of Practice For The Installation Of Replacement Windows And Doors

328 3212 1987 Code Of Practice For The Piped Installation Of Fixed Gas Fired Space Heaters In Non-Domestic Premises Including Places Of Public Assembly

329 3213 1987 Code Of Practice For The Storage Of LPG Cylinders and Cartridges

330 3216 2 1989 Code Of Practice For The Bulk Storage Of Liquefied Petroleum Gas

Amendment No. 3: 2001 of Irish Standard 3216: 1988

331 3217 1989 Code Of Practice For Emergency Lighting

332 3218 1989 Code Of Practice For Fire Detection And Alarm Systems For Buildings - System Design, Installation And Servicing

333 3219 1990 Code Of Practice For Hygiene In The Food And Drink Manufacturing Industry

334 17799 2 2002 Information Security Management Systems

335 291 1986 Use, siting, inspection and maintenance of portable fire extinguishers

superseded

336 1 1987 Portland cement Superseded

337 127 1990 Specification for the stress grading of softwood timber

Superseded

338 201 1989 Polyvinyl chloride (PVC) insulated cable and flexible cords of rated voltage up to and including 450/750 V

Superseded

339 201 1979 Amendment No. 4 : 1985 of I.S. 201 : 1979 Polyvinyl chloride (PVC) insulated cables and flexible cords - 450/750 V

Superseded

340 202 1980 Rubber insulated cables and flexible cords of rated voltage Uo/U up to and including 450/750 V

Superseded

341 249 1982 Cattle slats Superseded

342 228 1984 Monitoring centres for alarm systems Superseded

343 6 1974 Concrete sewer pipes Superseded

344 48 1955 Flush wood doors Superseded

345 265 1987 Installation of gas service pipes Superseded

346 291 1986 The use, siting, inspection and maintenance of portable fire extinguishers

Superseded

347 305 1985 Guide to quality management in the service industries

Superseded


ID Standard No


348 327 1988 Amendment No. 2 : 1988 of Standard specification (Domestic installation using liquefied petroleum Gases, Parts 1, 2, 3, & 4) 1987

Superseded

349 327 1 1987 Domestic installations using liquefied petroleum gases

Superseded


Superseded


Superseded


Superseded

353 326 1988 Code of practice for the structural use of concrete

Superseded

354 326 1 1995 Concrete. Part 1: Code of practice for the structural use of concrete

Superseded

355 328 1989 Code of practice for design and installation of gas transmission pipelines

Superseded

356 328 1 1987 Code of practice for design and installation of gas transmission pipelines Part 1: Pipelines

Superseded

357 328 2 1987 Code of practice for gas transmission pipelines Part 2: Pipeline installations

Superseded

358 329 1987 Code of practice for gas distribution mains Superseded

359 401 1986 Safety requirements for rewireable 13A fused plugs for normal and rough use having insulating sleeves on line and neutral pins

Superseded

360 411 1988 Safety requirements for 13 A switched and unswitched socket-outlets

Superseded

361 432 1992 Bottled water Superseded

362 432 2001 Bottled water Superseded

363 808 1987 Specification for CNG fuelled vehicles Superseded

364 809 1987 Regulator installations with inlet p[pressures up to 7 bar for natural gas and manufactured gas

Superseded

365 813 1996 Domestic gas installations Superseded

366 813 A1 1998 Domestic gas installations Superseded

367 999 1999 Guarding security services Superseded

368 17799 2001 Amendment No. 1 to IS 17799-2 : 2000 (Information security management - Part 2: Specification for information security management systems) Declaration, 2000

Superseded


ID Standard No


369 292 1 1993 I.S./EN 292-1 : 1993 - Safety of machinery - basic concepts, general principles for design - Part 1 : Basic terminology, methodology

Superseded

370

371 148

372 265 1989 Installation of gas service pipes (Second Edition)

Superseded

373 813 2002 Standard Specification (Domestic Gas Installations (Edition 2) Declaration, 2002

374 435 1 2005 Timber Post and Rail Roadside Fencing Part 1: Materials.

375 435 2 2005 Timber Post and Rail Roadside Fencing Part 2: Erection of fencing by excavation for posts

376 435 3 2005 Timber Post and Rail Roadside Fencing Part 3: Erection of fencing by driving posts

377 393 2005 Energy Management Systems - requirements with guidance for use.

378 355 2006 Specification for Helmets for Hurling and Camogie Players

379 380 2007 Beauty and holistic therapy - Management of training centres

380 370 2007 Colour code for buried plastics piping

381 436 2007 Farm Fencing - Timber post and wire

382 340 2007 Hygiene in the Catering Sector

383 341 2007 Hygiene in food retailing and wholesaling

384 356 2007 Playing field equipment - Goals - Functional and safety requirements - Test methods for portable and fixed goals

385 357 2007 Playing field equipment - Goals - Code of practice on the procurement, Installation, maintenance Inspection and storage

386 822 2007 Gas pressure regulating Installations on service pipelines

387

388

389

Unique Irish Standards held in James Joyce Library Irish Standards held in James Joyce Library ......

Documents

Transcript of Unique Irish Standards held in James Joyce Library Irish Standards held in James Joyce Library ......