~O~H ~ oOO~~OO'

11 /

ChlorineServiceBallValvesSeriesCL.7200

umaticsIndustrial ProductsA divisionof ClItbR International, Inc.

"-"

-

FeaturesJ

Threaded end Chlorine Service Ball Valves, Sizes Y41-2"Watts CL-7200 is specifically designed, built and tested toconform to the latest edition of Chlorine Institute Pamphlet#6, which covers .recommendations for valves and pipingin dry chlorine systems. "Dry" chlorine is defined as chlo-rine gas or liquid which contains less than 150 ppm of wa-ter. Greater amounts of water form hydrochloric acid inconcentrations high enough to cause severe corrosion. Ifwater content is questionable, it is recommended thatHastelloy trim be used.Consider the standard safety features: seal-welded"unibody" construction, "V" Ring stem packing; two bolt

FEATURES. ANSI900WallThickness

ProvideExtendedBodyLifein CorrosiveEnvironment.

. 4-BoltActuatorMountingPad..Constructed,cleanedandtestedin Accordanceto ChlorineInstituteRecommendations.

. VirginPTFESeatandSeals..All ValvesSealedandMarked"ForChlorineService".

. HastelloyBall andStemoptional.

CAPACITY

packing adjustment, cleaning to Chlorine Institute stan-dards; ANSI 900 wall thicknesses and oversize stem di-ameters all combine to make the Watts CL-7200 theonly, safe choice for your chlorine applications.Also included is 4-bolt actuator mounting pad and internalbody seal to prevent CL2 or HCL corrosion to body/adapter threads and weld.Because the CL-7200 series employs a standard "vented"monel ball, these products are unidirectional and are somarked with a cast flow direction arrow.

. SealWeldedConstructionProvidesSafestConstructionandMaximumOrificeSize/FlowCapacity.

. MultiplePiece"V" RingStemPackingProvidesSuperiorStemSealing.

. 2-BoltStylePackingAdjustmentIsolatesStemPackingfromHandleRotation.

. Monel500Stem,VentedMonelBall ProvideCorrosionResistanceandSeatProtection.

--J

VALVE SEAT RATING *

SOD

600...:Cf.I~ 400

*

200

0100 200 300TEMPERATUREof

SPECIFICATIONS

1/4", 3/8"1/2"3/4"1"

1'/2"2"

1515254075

110

606090150260350

400

*Although the Chlorine Institute establishes a 300 psi valve rating, theCL7200 utilizes components which provide an 800 psi seat rating anda 2220 psi (class 900) body rating.

Approved valves shall meet ANSI 616.34 and ChlorineInstitute Pamphlet 6 requirements. Valve is a unidirec-tional ball valve with vented ball, standard virgin PTFE

seats, multiple "V" Ring stem packing and weldedunibody construction. J

2

Technical Data

MATERIALSv

@--

v DIMENSIONS (INCHES)-WEIGHT

0

CL-7200 Series

1. Handle Nut - Stainless steel

2. Handle Washer - Stainless Steel

3. Packing Screw - Steel ASTM A449/Zinc plated4. Packing Retainer - 4130 Steel5. Packing Follower - Monel K-5006. Handle - Plated carbon steel with vinyl insulator7. Packing "V" Rings - Virgin PTFE8. Thrust Washer - Virgin PTFE9. Stem - Monel K-500

10. Seat - Virgin PTFE11. Ball - Monel K-400

12. Adapter - 1018 C.R. Steel/black oxide (W' - 1")and ASTM A216 Grade WCB (1%", 2").

13. Body seal - Virgin PTFE14. Body - ASTM A216 Grade WCB.

2

""-"

Size(inches)

1143Ia1h%1

1V22

Gl

F

D I

LL. I-w...JI-::>0

ACTUATOR MOUNTING

J!.20 UNCAll Sizes

FLDW~

~B

ABall

Orifice.370.370.500.656.8751.2501.500

BCenterto

End1.461.461.461.581.922.442.66

2.122.122.122.632.693.243.69

1.751.751.752.382.443.343.78

IH

2.252.252.252.252.752.752.75

Weight(I.:bs.).65.65.651.152.194.847.67

1.251.251.251.251.501.501.50

3

How To Order

y

OTHER CRITICAL SERVICE BALL VALVES:

CL-F15DD-15D- FlangedChlorineBallValvesSF-35DD-15D- Alloy20 FlangedBallValves

C-71DD-M1/S-81DD-M1-MM- UnibodyBallValveswith MonelTrim

Total Commitment to The Valve Industry

'-J

"..- matl.cS- - -- - - - - -- - -- - - - - ---- ----

Industrial ProductsA division of ClItbR International, Inc.

319 CommerceWay,BoulderWoodsIII. Pembroke,NH 03275 USA. Telephone (603) 227-9230 .Fax (603) 227-9730 . www.contromatics.com. email: controinfo@contromatics.com

Contromatics Industrial Products is a division of ClIt'OR International, Inc.

-"""'-

~

Contromatics reserves the right to change designs, materials or specifications wilbont notice or without obligation to furnish or install such changes on products previously or subsequently sold.

mooo Contromatics' Litho USA' CONCHLSRVBLVLVCL7200brorS12000

I

1" CL-7200 MM 01 VB OL

T --r-

TT T TSERIES: SEAT/SEAL

SIZE: CL-7200 MATERIAL VENTEDBALL-%"through2" 01 = PTFE (MANDATORY)

BALL/STEMMATERIAL HANDLEOPTIONS:MM= MonelBall& Stem OL= Oval

HH= HastelloyBall& Stem SH= StainlessLeverMH= MonelBall,HastelloyStem