35

36

37

38

39

40

41

42

SSC 02

the outdoor ssC 02 site solution Cabinet supplies -48 V DC power to Main-remote (M-R) radio base stations and auxiliary equip-ment. Physical space as well as prioritized power for auxiliary equipment such as trans-mission is also supported.

To provide security against AC power supply interruptions, battery backup functionality is ensured by built-in batteries or via connection to a BBS 6101 (for applications requiring very long battery autonomy or for cyclic battery operation).

flexibility The SSC 02 is confi gurable to suit both small and large M-R confi gurations. DC output capability ranges from 2,0 kW to 8 kW. DC load circuit breakers are available from 2A up to 32A ,ensuring that virtually any M-R site confi guration can be supported.

The system supports one battery circuit breaker connected to the built-in battery bank. For very large backup needs, the bat-tery bank can be daisy-chained to an exten-sion BBS 6101 cabinet.

The cabinet features 9 HU of space for auxil-iary 19” mountable auxiliary equipment.

All equipment, connections and the climate system are easily accessed via the lockable front door.

To facilitate operations, maintenance and spare parts handling, the power system mod-ules are the same as in the indoor system PBC 6200.

43

Telefonaktiebolaget LM Ericsson

www.ericsson.com

1/287 01 - FGC 101 0344 Rev D2

© Telefonaktiebolaget LM Ericsson 2010

TECHNICAL SPECIFICATIONS SSC 02

Overall, including protruding roof: 1460 x 660 x 930 mmFootprint: 660 x 700 mm (26,3 x 27,6 inches)9HU of 19” rack space210 kg (483 lb) excluding rectifier and batteries

88 – 280 VAC two or three phase (HVD High Voltage Disconnect activates at 300V +/- 10V) 220 – 280 VAC single phase (HVD High Voltage Disconnect activates at 300V +/- 10V)50-60 Hz ±5%400 V AC single phase to the PBC 6100 system310 ±10 / 285 ±10 VAC system disconnect / reconnect level0.99> 91% (184 V AC and higher for 40 % - 100% load)15 kA (L-N), 50 kA (N-PE, Nominal surge current, 10/350 us) SPD class I/B (IEC/VDE)

-48 VDC (-15% / +20%)Via temperatyre-stable electro-hydraulic circuit breakers (CB).Main load distribution: 10 x 13 mm wide CB positionsPriority load distribution: 14 x 13 mm wide CB positionsAvailable CB ratings (A): 32, 25, 20, 16, 10, 6, 2

Rectifier capacity: 2.0 kWSystem capacity: Up to 4 rectifiers, i.e. 8 kW (system limited to 130 A total DC outputFor up to 6 external DC outputs (RRU’s)

200 and 63 A (200A if battery expansion in BBS 6101)1 (for battery expansion in BBS 6101), Optional

Max heatload in 19” space is 1680 W with a ΔT of 7° C 1050 W heatload in 19” space will result in a ΔT of 5° C With 500 W heatload in 19” space the ΔT will be 3.5° C

120 W at max internal heat load and 25 °C (77°F) ambient temperature . (180W max power consumption)90W average at 25 °C (77°F) ambient temperature. (145W max power consumption)580W max power consumption

Normal operation: -33 to +50 °C (-27 to 113 °F). Non destructive : -40 to +60 °C (-40 to 140 °F).Transportation (< 3 months), excl. batteries: -40 to +70 °C (-40 to 158 °F)Normal operation: 15 – 100 %Transportation (< 3 months), excl. batteries: 5 – 100 %IEC 60 950-1, EN 60 950-1 and UL 60 950-1CE, CB, UL, CSACISPR 22/EN 55022, FCC part 2 15, GR-1089-CORE, ICES-003IP55IEC 60721-3-3 class 1M2 and ETSI EN 300 019-1-3 class 3.1 according to IEC 60068-2-57, assuming proper installation and usage of SSC-02 appr. batteries and accessories only.

Default setting: 8 binary alarm outputs. Major power alarm, minor power alarm, CSU failure (power system), CLU failure, high battery temperature, door alarm and 2 un-defined alarms.On power system controller, rectifiers, climate systemLCD display and keypadVia the system controller’s RS232 or optional Web-interface

MECHANICAL External dimensions (HxWxD)

Internal space for auxiliary equipment:System weight:

AC InputInput voltage:

Line frequency: Non-destruction voltage:

Power factor, rectifiers:Efficiency, rectifiers:AC Surge protection:

DC OutputOutput voltage:DC Distribution:

Output power and current:

DC Surge protection:

BAttery InterfACesAvailable battery circuit breakers (CB):Number of surge protected CB positions:

Climate System capacity:

ClImAte system pOwer COnsumptIOnHeat-Exchanger power consumption:Battery compartment CLU:Heating mode:

envIrOnmentAlTemperature range:

Relative humidity:

Safety:Approval:EMC:Enclosure:Optional earthquake proofing:

supervIsIOn AnD COntrOlBinary Alarm Outputs

LED indicatorsLocal interfaceRemote access

Climate Control systemThe heat exchanger climate system ensures a suitable interior climate for the 19” equipment and power system. For the battery compartment an energy efficient active cooling system is used to ensure maximum battery lifetime and performance. Both climate systems work without air exchange with the ambient environment.

environmentEarthquake Zone 4 bracing is available as an option.

supervision and ControlThe power system controller features an LCD display and keypad for quick access to power system information at the site. The same information and more can be accessed remotely. Binary alarms can be connected to the network supervision system, via the site’s alarm collecting system. The power system controller’s binary outputs also supports a diesel generator On&Off control.

44

45

46

RASOS PUMPUTIENĖS ĮMONĖ

Tilžės 144, 76350 Šiauliai Tel.: (682) 40021, taksas: (700) 05090 rasa.pumputiene@splius.lt

Rasos Pumputienės įmonė Įmonės kodas 145887771, PVM kodas LT458877716 A/s LT13 7044 0600 0235 9389 Vilniaus g. 213 – 19, 76350 Šiauliai Tel.: (682) 40021, tel./faksas: (700) 05090

Adresas korespondencijai: Tilžės 144, 76350 Šiauliai rasa.pumputiene@splius.lt

INFORMACIJA APIE PRADEDAMĄ RENGTI TECHNINĮ PROJEKTĄ

ELEKTRONINIŲ RYŠIŲ INFRASTRUKTŪROS STATINIO (10.7) RUDNIOS K., KANIAVOS SEN., VARĖNOS R.SAV. (SKLYPO KAD. NR. 3855/0004:224 RUDNIOS K. V.) STATYBOS PROJEKTAS

Statybvietės adresas:

Rudnios k., Kaniavos sen., Varėnos r. sav., sklypo Kad. Nr. 3855/0004:224 RUDNIOS k. v.

Statinių esama ir (ar) numatoma pagrindinė naudojimo paskirtis:

Pagrindinė naudojimo paskirtis: Inžineriniai tinklai. Elektroninių ryšių infrastruktūra (10.7)

Projektinius pasiūlymus parengusio projektuotojo (juridinio ar fizinio asmens) įgalioto atstovo (-ų), galinčio informuoti apie projektinius pasiūlymus, vardas, pavardė, elektroninio pašto adresas ir telefono numeris:

Rasos Pumputienės įmonė Projekto vadovė Rasa Pumputienė El. paštas: rasa.pumputiene@splius.lt Tel. Nr.: + 370 682 40021

Statytojas (fizinio asmens vardas, pavardė, juridinio asmens pavadinimas, juridinio asmens buveinės adresas, elektroninio pašto adresas, telefono numeris):

Statytojas: UAB " TELETOWER ", Žemaitės 15, LT-03504 Vilnius, Tel.: +37069923465 El. p. marius.pilinka@bite.lt

Susipažinimo su projektiniais pasiūlymais adresas, telefono numeris ir laikas:

Susipažinti su projektiniais pasiūlymais galima:

Adresas: LT-76350 Šiauliai, Tilžės 144 Projektų vadovas: Rasa Pumputienė El. paštas: rasa.pumputiene@splius.lt Tel. Nr.: + 370 682 40021 Nuo 8:00 iki 16:00 valandomis iki viešojo susirinkimo pabaigos

Informacija, iki kada ir kokiu būdu iki viešo susirinkimo visuomenės atstovai projektuotojui gali teikti pasiūlymus dėl projektinių pasiūlymų:

Projektuotojui pasiūlymus dėl projektinių pasiūlymų teikti raštu:

Adresas: LT-76350 Šiauliai, Tilžės 144 Projektų vadovas: Rasa Pumputienė El. paštas: rasa.pumputiene@splius.lt Tel. Nr.: + 370 682 40021

Viešo susirinkimo adresas ir laikas:

2016 m. liepos 14 d., 17:00 val. KANIAVOS seniūnija, Panočių k., Kaniavos sen., Varėnos r. sav., LT-65242, Tel.: +370 68240021

47