SEPTEMBER / OCTOBER 2014

KTI2300016 Piece 1/2" Drive 6 Point SAE Shallow Socket Set• Manufactured with heat treated chrome vanadium steel• Packaged in a blow molded case

This set includes 13 sockets from 7/16" thru 1-1/4", ratchet, breaker bar and extension.

IRT2235QTiMAX2235 Series 1/2" Quiet Impact Wrench

IRT2235TiMAX2235 Series 1/2" Impact Wrench• Power: Punish the toughest bolts with 1,350 ft-lbs of nut busting torque, powered by Ingersoll Rand’s finely tuned twin-hammer impact mechanism

• At only 4.6 pounds, no other impact wrench on the market can match the combined power and weight of the 2235 Series

• Reliability: Every component, every mechanism and every function of the 2235 Series has been put through hell to ensure it always performs in the face of the toughest jobs

• Backed by a 2-Year warranty, 2235 Series is a finely tuned workhorse• One-handed forward/reverse control, feather-touch trigger, and 4-position power regulator

1350 FT/LBS OF NUT BUSTING

TORQUE

400 LBCAPACITY

VMPVT-001-7SJVamPLIERS™ Slip Joint Pliers With Patented Curved Jaw• VamPLIERS™ Technology - uniquely designed concave shaped jaws with vertical and horizontal serrations on the inside jaws which make it possible to grab on to a stripped/rusted/corroded screw or rounded nut for extraction

• Works on special screws like Torx, single-sided, tamper-proof, security, or any unique head

• Slip joint allows flexibility to remove bigger size screws or nuts/bolts; slim nose to access confined areas

• Made from treated high quality carbon steel from Kobe in Japan, inside jaws hardened to provide strong grip to target screw or nut/bolt

• Smooth varnished finish with environmentally friendly elastomer ergonomic handle grip

NEW

NEW NEW

The Bone-ster™ Mechanics Creepers• 100% made in USA• Double ribbed body with 400 lb. capacity• Comfortable ergonomic design• Lifetime warranty on wheels and casters• 3 inch tires to roll smoothly over any shop surfaces

Who says small can't be strong? The Bone-ster™ may be our littlest creeper, but itsdouble-ribbed body gives it an incredible 400 pound capacity! The 3 inch diameter wheelswith grippy tires glide smoothly over shop floors, even if the surface is less than perfect!BNE4031B - BlackBNE4031BL - BlueBNE4031R - Red

$91.59

$399.99

$389.99

$41.49

Your Choice: $153.99

TWXTRA

THEIMPACTWRENCH.COM

Introducing the Ingersoll Rand 2235 Series Impactool.™ A powerful, durable and reliable workhorse whose reputation is built on helping you build yours, because you don’t do a job halfway, and neither do our tools.

THE BAR DOESN'T RAISE ITSELF.

FOLLOW US. #IRTOOLSFor these and more Mail-in Rebate forms visit

ingersollrandproducts.com/rebates

Purchase between Sep. 1 and Sep. 30, 2014 to receive an Ingersoll Rand Fender Cover via mail.

Purchase between Oct. 1 and Oct. 31, 2014 to receive an Ingersoll Rand Fleece via mail.

LOW PROFILE IMPACTOOLSTM

HAMMERHEAD 2015MAX & 2025MAX3/4” IMPACTOOLTM

2145QiMAX

SEPTEMBER 2014 OCTOBER 2014

• 180 �-lb of max torque and 7,100 rpm

• Head height under 2” and reactionless torque

• 1350 �-lb of max reverse torque, weighs just 7.4 lbs!

• Ingersoll Rand Quiet Tool Technology

NEW PRODUCTS

The Bone™ Mechanics Creepers• 100% Made in USA• 300 lb. capacity• Lifetime warranty on wheels and casters• Comfortable ergonomic design• Big 5 inch wheels that easily roll over common shop obstacles

The Bone™ has been around since 1994 and continues to impress with its big 5 inchdiameter wheels that roll over just about anything that can be found in a shop. From nuts and bolts to drop cords and floor drains!BNE6031B - BlackBNE6031BL - BlueBNE6031R - Red

The Tail Bone Rough Rider™ Mechanics Creeper Seats• 100% made in USA• 450 lb. capacity• Wide base will provides outstanding stability• Big 5 inch wheels and casters allow this creeper seat to be used in less than perfect realworld locations

• Comfortable ergonomic design with extra wide saddle

The Tail Bone Rough Rider™ has all the features of the standard Tail Bone™, but uses thewheels from the Rough Rider™ creeper, sitting you an extra inch higher off the ground,giving it extra ground clearance and allowing it to be used in outdoor conditions.BNE5131B - BlackBNE5131BL - BlueBNE5131R - Red

The Rough Rider™ Mechanics Creepers• 100% Made in USA• Huge 5 3/8" wheels will easily roll over dirt or gravel with a firm substrate• Comfortable ergonomic design• Lifetime warranty on wheels and casters• 400 lb. capacity

The Rough Rider™ is a beefed up version of the Bone™, made specifically to be usedoutdoors in less than ideal conditions. Extremely popular with military, police, and othergovernment agencies in the US and Canada. The Rough Rider™ is designed to be used onextremely rough pavement, dirt, and even grass and gravel with a firm substrate!BNE7031B - BlackBNE7031BL - BlueBNE7031R - Red

FNTEM5EcoMaster Non-Heated Bench Top Washer

FNTEM1435HEcoMaster 1435 Portable Heated Brake Washer, 15 Gallon Drum• Heavy-duty 120 volt pump and 1000 watt heater• Heavy-duty drum dolly with two locking casters and two regular casters

• Dual filtration system with pre-filter screen and sockfilter designed to insure clean solution

• Convenient flexible metal spigot for those tough cleaning jobs• Designed for easy servicing, remove basin from drum in minutes

Aqueous heated 120 volt portable brake washer. Heated washers improve detergent anddegreaser performance dramatically. Drum mounted for easy waste disposal. Our dualfiltration system helps to extend the life of the cleaning solution. Equipped with a flowthrough brush and spigot, making your cleaning job fast and easy. The dual purpose covercan be used as a cover or as a catch basin. Use it on alignment lifts, ramp lifts or place iton the floor. For use with an aqueous based cleaning solution.

SUN6602LP2 Ton Low Profile Service Jack• Ultra low height at 2.75" and max height of 24"

• Ideal for sports cars, exotic cars and vehicles with flat tires

• Rapid rise Technology with dual pump pistons for rapid rising to load

• True low-profile chassis; Extra long chassis lifts vehicles up to 24" for undercarriage maintenance

• ASME-PALD for product safety• SUNEXpress Warranty for hassle-free service

TOT30313-1Aerospace Protectant Trigger Sprayer, 32 oz• Matte finish with no oily and greasy residue• Keeps treated surfaces looking new• Prevents fading and cracking, and restores lost color and luster• Powerful UV blockers• Anti-Static, repels smudges, dust, soiling, and stainingOriginally engineered for aerospace and aviation applications, 303® Aerospace Protectant™ has found its way into millions ofhomes for day-to-day use on vehicles, sports equipment and more.Because it’s water-based, this protectant is safe to use on all products,from your vehicle’s paint job and leather seats to internal engine parts.

FNTEM5HEcoMaster Heated Bench Top Washer• 500 Watt heater• Corrosion resistant heavy-duty pump• Heavy-duty high density polyethylene fluid tank• Soaking capacity up to 4-gallons• Stainless steel lid

Heated table top aqueous parts washer with flow-through brush. Great for cleaning small parts. Heated parts washers increasedetergent and degreaser effectiveness.

3

Your Choice: $199.00

Your Choice: $218.04

Your Choice: $239.10

$1,295.00

$344.36

$645.11

$269.99

$24.95

Ask your salesman aboutour great lease options

4

External Thread Repair Tools • External tools restore inch or metric, right handed or left handed fastener threads• Floating cutters are self-adjusting to any pitch and size within range• No need for calibration or identifying thread types• Automatically chases good thread sections to repair the damaged parts

The Nes ThreadMate is a universal external thread repair tool. This easy-to-use toolsoperate by adjusting the knob that sets the proper diameter of the tool to the thread,and the blades float to the correct pitch. Once the tool fits into a thread slot, beginrepairing the threads by simply rotating the tool. Comes equipped with blades madefrom hardened steel.

ANGNES06040 - 5/32" to 1/2"• Capacity is 5/32" to 1/2"

ANGNES1A - 5/32" to 11/16"• Capacity is 5/32" to 11/16"

ANGNES2 - 11/16" to 1 1/2"• Capacity is 11/16" to 1 1/2"

ANGNES13003 Piece External Thread Repair Set, 5/32" to 6"• External Capacity is 5/32" to 6"• External tools restore inch or metric, right handed or left handed fastener threads

• Floating cutters are self-adjusting to any pitch and size within range

• No need for calibration or identifying thread types• Automatically chases good thread sections to repair the damaged parts

The Nes1300 is a 3-piece external thread repair set includes the Nes 1A, Nes 2, and Nes 3.The Nes 1A has a working capacity from 5/32" - 11/16". The Nes 2 has a working capacityfrom 11/16" - 1-1/2". Nes 3 goes from 1-3/8" - 6" and is used on large threads that couldbe part of large vehicles and machinery, such as trucks, buses, or tractors.

External/Internal Thread Repair Sets• One hand tool restores inch or metric, right handed or left handed fastener threads

• No need for calibration or identifying thread types• Floating cutters are self-adjusting to any pitch and size within range

ANGNES1015 - 3 PieceSet comes with one external and two internal tools. The Nes 1A external thread repair,which has a working capacity from 5/32" - 11/16". Also the Nes 21 and Nes 22internal tools, which have a working capacity from 5/16" - 7/16" and 1/2" - 5/8".

ANGNES1017 - 4-PieceSet comes with one external and three internal tools. The Nes1A external thread repair,which has a working capacity from 5/32" - 11/16". Also the Nes21, Nes22 and Nes23internal tools, which have a working capacity from 5/16" - 7/16", 1/2" - 5/8", and11/16" - 13/16".

ANGNES1025 - 6-PieceContains external NES1A and NES2 with a working capacity of 5/32" - 1.1/2" andInternal NES21, NES22, NES23 and NES24 with a working capacity of 5/16" - 1.1/4".

TIT55010Infrared Thermometer• Ideal for measuring surface temperature of objects• Temperature Range: -26 degrees Fahrenheit - 716 degrees Fahrenheit• Laser Sighting Power • Spot Ratio: 12:1• Emissivity: 1.10 - 1.00 • Accuracy: +/- 2%• Auto power off • Backlight• Display hold • Adjustable emissivity

SCH12500T-60 BMW Belt Tensioner Wrench• Access most BMW T-60 Torx serpentine belt tensioner fasteners• 2007 to 2013 N54 and N55 engines• Double ended wrench provides two T-60 bits for different applications• Extra long wrench improves leverage and accessibility• Special T-60 Torx tip fits snug in the aluminum tensioner body reducing damage

Access to 2007 to 2013 N54 & N55 BMW serpentine belt tensioner bolts is restricted. Thistool allows access to the tensioner bolts with limited removal of surrounding parts. Extralong wrench provides extra leverage to loosen and tighten tensioner bolts. Double endedtool provides two length T-60 bits and offsets for access to difficult applications. Specialtydesigned T-60 bit tip fits snug in aluminum tensioner body to reduce fastener damage.Reduce repair process time and fastener damage using this tool.

SRRHL427Heater Line Repair Kit• Repair damaged heater lines including pinholes, cracks, kinks, and more

• Covers most common SAE and metric lines including 1/2", 5/8", 13mm and 16mm. 3/4" also available (sold separately).

• Make connections easily by hand; no specialty tools required

• OE style hose easy to route• On-the-car repairs made simple

Perfect for vans and SUV's. Pays for itself in as little as one job. Convenient, all-in-onekit for repairing rear heater lines. Features all-aluminum fittings and OE style hose.Connections are made by hand and tightened using standard wrenches. Replacement parts available.

THX512Bosch Jumper Wire Test Kit• Bosch jumper wires allow the technician to test current inside circuits• Can be used as single test leads or as jumper wires• Jumper wire kit allows testing for connectors using Bosch BDK and JPT terminals• Terminal tools included to remove damaged terminals from connector• Includes carry case

Pneumatic Pilot Punches• Used with a pneumatic tool• Heavy duty S2 steel• Black oxide finish for additional rust protection• Made in the USA

MAY31950 • #8 1/4"

MAY31951 • #9 5/16

MAY31952 • #10 3/8"

MAY31953• #11 7/16"

MAY31954 • #12 1/2"

MAY3734510 Piece Screw and Pipe Extractor Set• Removes broken screws, bolt, and studs pipes• Removes pipes• Extractors designed to cover a range of 1/4" to 1- 1/2"

• Storage case included

NEW PRODUCTS

$31.99

$62.89

$89.99

$209.99

$273.55

$457.49

$464.74

$88.39

$37.99

$145.39

$66.16

$27.49

$27.99

$24.99

$25.79

$26.49

$102.49

5

NEW PRODUCTS

MLW2791-22CTM18™ FUEL™ Cordless 2-Tool Combo Kit, featuring M18™ FUEL™ 1/2" Drill/Driver and M18™ FUEL™ 1/4" Hex Impact Driver• POWERSTATE™ Brushless Motor: Drill Driver - Delivers up to 725 in-lbs of torque withmaximum sustained torque to complete the toughest of applications

• POWERSTATE™ Brushless Motor: Impact Driver - Delivers up to 1,600 in-lbs of torquewith maximum sustained torque to complete the toughest of applications

• REDLITHIUM™ Battery Technology: Superior pack construction, electronics, andperformance deliver more work per charge and more work over pack life than anybattery on the markets

• REDLINK PLUS™ Intelligence: The most advanced system of cordless power toolelectronics. Provides optimized performance and overload protection using total systemcommunication between tool, battery and charger

• Heavy duty carrying case and multi-voltage charger included

MLW2696-22CTM18™ Cordless Drill Driver / Hackzall Kit• Milwaukee® 4-Pole Frameless Motor: A robust design combined with rare-earthmagnets for longer life, best-in-class 425 in-lbs of torque and 0-500/0-1,500 RPM

• Single Sleeve Ratcheting Chuck: All-metal 1/2” chuck optimizes grip strength andreduces slippage

• One-handed design provides superior control and versatility over a standardreciprocating saw

• Compact size allows cutting in tight spaces, and light weight for overhead work• REDLITHIUM™ Battery Technology: Superior pack construction, electronics, andperformance deliver more work per charge and more work over pack life than anybattery on the market

WHILE SUPPLIES LAST!

MLW2667-21CTM18™ Cordless 2-Speed 1/4" Hex Right Angle Impact Driver• 1.4" Head allows for greater access to complete a wider varietyof applications

• 2-Speed Drive-Control™ offers greater control over applications• 1/4" hex drive with 1" bit acceptance for tighter accessibility anda wider range of useable accessories

• Extended paddle switch for multiple grip options

MLW2668-21CTM18™ Cordless 2-Speed 3/8" Right Angle Impact Wrench• 1.7" Head allows for greater access to complete a wider varietyof applications

• 2-Speed Drive-Control™ offers greater control over applications• 3/8" anvil with friction ring for fast, easy socket changes• Extended paddle switch for multiple grip options• LED Light to illuminate work surfaces

MAKLXDT04X118V LXT® Lithium-Ion Impact Dr Kit With Bonus Impact Gold Bit Set• Makita-built 4-pole motor delivers 1,420 in-lbs. of Max Torque• Variable speed (0-2,300 RPM & 0-3,200 IPM) for a wide range of fastening applications• Compact design at only 5-7/16" long and weighs only 3.3 lbs. for reduced operatorfatigue

• Convenient one-touch 1/4" hex chuck for quick bit changes• New redesigned rubberized soft grip provides increased comfort on the job• Includes bonus Impact Gold Bit Set

120XP Universal Spline XL GearBox™ Flex, 10 Piece Sets• 120 position ratcheting mechanism for 3 degree swing arc• Spline drive to work on more types of fasteners• Longer beam to increase reach• Reduced ratcheting end diameter for increased access• Dual Surface Drive on open end

KDT86126 - Metric Includes: 8-19mm

KDT86142 - SAE Includes: 1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8",11/16", 3/4"

120XP™ Universal Spline XL Ratcheting Wrench Sets with Flex-Head• 120XP™ Universal Spline XL RatchetingWrenches have double-stacked pawls to producethe 120 positions and three-degree swing arc, toturn a fastener in tighter confines

• Reduced Diameter Ratcheting Box-End and Open-End for increased access

• XL Beam Design is up to 25% longer for improvedreach and leverage

• Universal Spline Drive works on 5 different fasteners including 12-point, 6-point, Spline,E-Torx, square and also rounded 6-point, for convenience

• Ratcheting Flex-head Box-End gives adjustable access angle• Bright full polish chrome finish• Highly visible, recessed color size markings• Meet or exceed ASME performance requirements

KDT86229 - 12 Piece, Metric (8 - 19mm)

KDT86247 - 11 Piece, SAE (1/4” - 3/4”)

120XP™ Universal Spline XL Ratcheting Wrench Sets• 120XP™ Universal Spline XL Ratcheting Wrenches have double-stacked pawls to produce the 120 positions and three-degree swing arc, to turn a fastener in tighter confines

• Reduced Diameter Ratcheting Box-End and Open-End for increased access• XL Beam Design is up to 25% longer for improved reach and leverage• Universal Spline Drive works on 5 different fasteners including 12-point, 6-point, Spline,E-Torx, square and also rounded 6-point, for convenience

• Bright full polish chrome finish• Highly visible, recessed color size markings• Meet or exceed ASME performance requirements• Dual Direction Surface Drive® on the open end provides better grip and reduced fastenerrounding

• For organized storage, sets come with a compact, easy-grab V-rack

KDT86426 - 14 Piece, Metric (6 - 19MM)

KDT86450 - 11 Piece, SAE (1/4” - 3/4”)

$259.99

$259.99

$499.99

$249.99

$374.99

$228.79$176.49

$299.99

$269.99

$276.99$249.99

6

NEW PRODUCTS

CDOBATPBattery Tester• The complete solution to testing all 12V batteries from SLI to AGM

• Performs battery test on or off the vehicle whiledisplaying results on the easy to read screen

• Tests the electrical system of the car including starter,alternator, and engine/chassis ground

• Integrated thermal printer lets you print out test resultsquickly for your customer

• Customize your PC printout to add your name and customer information

• Easy to use and fast

FIRST TOMARKETEXCLUSIVE

SCUSL1Portable Lithium-Ion Jumpstarter Pack, 12000mah• Lithium-Ion powered jumpstarter with 12,000 mah battery• Integrated battery management ensures polarity protection, over/under chargeprotection, and unlimited connection protection

• Digital display to show voltage and charging status• Contoured design with textured grip for secure handling• Includes car and wall charger for added convenience

Compact and powerful Lithium-Ion portable jumpstarter with integrated batterymanagement offering protection against reverse connections, over and undercharging,as well as leaving the unit connected to a vehicle while running. Display screen showsvoltage and starting status. Includes both a wall and car charger. The entire unit isshipped in a soft case for easy organization. Comes with a 1 year warranty.

SCUSL360RRechargeable Lithium Powered Worklight• Magnetic base and back with swivel hang hooks• Includes car and wall chargers• Up to 4 hours run time on single charge• 360 degree swivel base• Limited 1 year warranty

Lithium powered worklight with 360 degree magnetic base and twinmagnets on back as well as 2 swivel hooks provides maximum inmounting options. Unit gets 4 hour run time on low setting and 3 hours on high. Handy spotlight option as well. Quality construction with 1 year limited warranty.

KTI79800Emergency Safety Flare• Non-chemical safety flare • Positive buoyancy• Nine flash patterns including the USCG approved SOS• Runtime up to 100 hours depending on flash pattern• Shatter-proof, crush-proof, and water resistant• 1 CR-123 battery included

A non-chemical environmentally safety flare. Applications in automotive, industrial,and marine. Nine distinctive flash patterns for emergency situations and work areas.1 Year Warranty.

KTI73396Aluminum 16 LED Flashlight• 16 LED (96 lumens) flashlight• Rubber grip handle • Aerospace grade aluminum body• 3 - AAA batteries included • Belt holster included

KTI723808" Straight Cut Tin Snips• One piece drop forged construction of high carbon steel• Cushion handle with smooth, comfortable bows• Designed for cutting straight and wide curves to the left or right• Cuts up to .61mm cold rolled steel or .41mm stainless steel• Cutting blades open to approximately 4" wide• Induction hardened cutting edges 54-58 HRC

CRK5470SLimited Edition Fossil™ Folding Knife With Stone Wash Blade Finish• Limited Edition Fossil™ Design• Stonewash Blade Finish• Hammered Stainless Steel Frame• IKBS Ball Bearing System for smooth opening• Designed by Flavio Ikoma

Limited Edition Fossil™ folding knife with stone washed blade finish, includes the IKBSball bearing system for smooth and fast opening. The flipper converts into a finger guardwhen the blade is open and the hole in within the blade allows for a second openingoption. The G10 scales over hammered stainless steel handle allows for additional grip.

CMF120032000 Lb. ATV/UTV Winch Kit• 2,000 lb. rated pull• Permanent magnet motor• Universal mounting channel• 5/32 in. x 49 ft. galvanized super-duty aircraft cable• 153:1 gear reduction ratio• Kit includes 3 bonus accessories to ensure safe and easy winching.

MTNWE6906Auto Darkening Welding Helmet• Solar Cells, Battery Back Up• Viewing Area: 96.00 * 40.00 mm• Low-High Adjust by Dial Knob• Lens Shade: 9-13 Variable• 2 Sensors

$435.69

$78.99

$165.39

$17.99

$16.39

$25.99

$74.99

$133.83

$99.99

7

NEW PRODUCTS

CTE56-353MULTI US 7002 12V Battery Charger and Maintainer • Battery charger for HD trucks, large boats, automobiles, and RVs• Reconditioning mode extends life of your battery• Safe and easy to use - automatic on/off with sensor to read battery• Supply mode feature to retain computer settings of vehicle while battery is removed• Smartest battery charger in the world• Includes two interchangeable connection leads, one with clamps, and one with eyelet terminals.

CTE56-674MULTI US 25000 Battery Charger - Shop Unit• Professional 12V Charger - For the mechanic/shop or the Do it Yourselfer

• Replaces 70 amp wheel charger - all the power in a smaller unit• Safe and easy to use - reverse polarity protection• Supply mode to retail computer settings when battery is removed from car• Reconditioning mode extends battery life

CTE56-864MUS 4.3 12V Battery Charger and Maintainer• For cars, trucks, and boats• Reconditioning mode to extend the life of battery• Shock proof and water resistant• Safe and easy to use - auto on/off with sensor to read battery• Smartest charger in the world • 5-year warranty• Fully automatic charging and maintenance in 8 steps maximizes battery life and performance• Numerous accessories simplifies using the same charger for multiple batteries• Patented maintenance charge for maximized life and performance• Patented desulphation extends the battery life• Automatic detection of end-of-life batteries that eliminates surprises

CTE56-865US 0.8 12V Battery Charger• 12V charger for motorcycles, ATVs, lawn tractors,snowmobiles, and small watercrafts

• Safe and easy to use - automatic shut off/on with sensor to read battery status

• Waterproof, shock proof, and reverse polarity protection• Patented desulphation to extend battery life• 5 year warranty• Fully automatic charging and maintenance in 6 steps maximizes battery life and performance

• Numerous accessories simplify using the same charger for multiple batteries• Patented maintenance charge for a combination of maximized life and performance• No sparks, short-circuit proof and reverse-polarity protected for untroubled usage

® ®

CTE56-958MUS 4.3 Polar Battery Charger For Extreme Cold Conditions• 4.3 12V battery charger for temperatures down to -25 degrees F• Safe and easy to use - reverse polarity protection• Water resistant and shock proof• Extends battery life with reconditioning mode• Smartest battery charger in the world• Features a 5 year warranty

CTE56-959MUS 4.3 TEST&CHARGE Battery Charger • Battery Charger with built in tester for battery and alternator• Safe and easy to use - automatic on/off with sensor to read battery• Water resistant, shock proof, reverse polarity protection• Extends battery life• Smartest charger in the world• Features a 5 year warranty

CTE56-870Comfort Indicator With Cig Plug Connection• Charge your battery through your vehicles 12v socket• Lights give you status of battery - green, yellow, red• Easy and safe to use• Instantly tells your battery's status• Ideal for vehicles with hard to reach batteries*Note: Socket must be live when ignition is in the “off” position.Compatible with CTEK US 0.8, MUS 3300, MUS 4.3 & MUS 7002

CTE56-380Comfort Indicator With Panel Connection• Connect to battery and pull through vehicle dashboard• Quick check of battery status through red, yellow andgreen lights

• Plug CTEK charger right into panel on dash• Ideal for boats, cars or trucks• Safe and easy to use• Easy access for viewing for those ‘hard to get’ to batteries

CTE56-382Comfort Indicator With Eyelet Connection• Status of battery instantly once connected• Safe and easy to connect right to battery• Quick connect to CTEK battery when light goesto yellow or red

• Accessory for all CTEK battery chargers• Leave it on your battery

CTE56-926LITHIUM US Battery Charger• Battery Charger for Lithium-Ion Phosphate batteries• Safe and easy to use - reverse polarity protection• Extends battery life• Auto on/off with sensor to read battery status• Worlds Smartest Charger• Features a 6 year warranty

$289.99

$79.99

$139.99

$46.99

$13.89

$99.99

$111.29

$111.29

$10.99

$18.59

8

HOT PRODUCTS

Flarelock Hoses for Passenger Cars• Flare Lock Hose made exclusively for cars & small trucks• Each end is flared to permit connection of two or more links at a time

CRU11AFLT250• 2.5" X 11’ for compact cars

CRU11AFLT300• 3" X 11’ for compact cars

CRU11AFLT4004" Flarelock Hose 11ft• Exhaust Hose • Rubber• Flared End Allows Hoses to Connect Without Adapters

Splice Connectors• Allows 2 hoses to be joined together

CRU16LSP30 3”CRU16LSP40 4”

“Y” Connectors• Allows 3 hoses to be joined together• Rubber connector

CRU16LRY25 2-1/2”CRU16LRY30 3”

CRU16LDF252-1/2” Rubber Door Port

CRU19MADF30Door Ports• Allows hose to be vented through the door • 3” aluminum

Tailpipe Adapters• Designed for easy adapting to all sorts of vehicle tailpipes

CRU17AF300 - Straight adapter • With hook & chain fits tailpipes up to 2-1/2”

CRU17AF475 - Oval adapter (3” x 6” oval) • Fits tailpipes oval 2-1/2” x 5-1/2”

CRU17AF575 - Oval adapter (3-1/2” x 8-1/2”)

CRUF675 - Oval/Twin adapter (3” x 11”)

CRU17ARA250 - Tailpipe/Stack Adapters

CRU17ARA300 - Bell Shaped Adapter

F67517RAR250

17AF300

17AF475

CrushProof® and the CT logo are registered trademarks of Crushproof Tubing Co.in the United States and other countries and are being used with permission.

HOTHF-1Hot Foot Feet Warmers (Pair)• The 2.25" x 4" foot warm - up is designed to operateon less oxygen than our other body warmers

• Comforting 130 degrees heat for up to 6 hours

HOTHH-1Hand Warmer Single Pack• Air activated 4" x 5" hand and bodywarmer lasts up to 18 hours to providesafe, comfortable warmth in thecoolest temperatures

HOTHH-2Hand Warmers 2-Pack (2.25” x 4”)• Air activated warmers will provide up to 10hours of soothing warmth for inside gloves,pockets, or wherever you feel a chill

HOTB845Heated Acrylic Hunting Socks (Size 10 - 13)• Features a patented pocket located on the top ofthe toe area that holds one HotHands foot warm-up- providing up to 6 hours of comforting heat.

HOTY2KCold Weather Survival Readiness Kit• 75 Hours of total heat! Includes: (1) 15 hour survival heat pack (9 x 13), 2 pair Hot Hands (18 hour heat packs), 2 pair Hot Hands 2 (7 hour heat packs) and 2 pair Toasti Toes (5 hour heat packs).

AETSMJS4Super Mega Jack Car Opening Tool Set• Complete auto lock-out kit unlocks virtually any vehicle with no damage• Includes unique one hand jack tool used for inserting the Air Jack• Super Air Jack made from ballistic nylon slips right in the door• Shielded quick max long reach tool is plastic coated to prevent damage• Includes unique strap tool for vertical buttons

AST400ESmart Eraser® Pad for Pinstripe Removal Tool• Molded rubber with 5/16" - 24 thread arbor• For use with the 1208 or 533ET• Pad size: 3-1/2"

$127.79

$209.95

$105.29

$42.39

$31.65

$11.79$18.50

$34.89$36.50

$43.19

$39.60

$53.99

$106.95

$39.95

$32.75

$0.99

$1.10

$1.29

$16.15

$16.29

$99.95

$12.59

9

HOT PRODUCTS

KAS295AMemor-Eze Computer Memory• Automotive computer memory retaining tools designed tomaintain the memory of the on-board vehicle computer(CCU) when the power source (battery) is disconnected

• Use of these tools when changing or interrupting the powersource prevents loss of certain drivability codes, keylessentry codes, digital radio setting, cellular phone settingsand other memory related functions

• Prevents loss of radio function on anti-theft radio systems• Use with 9 volt alkaline battery (not included)

DENDF-705DOffset Style Decal Eraser Wheel• The wheel will not burn the paint• Made of soft rubber with a vanilla scent• Can be used the removal of large decals• Takes an inch wide stripe at a time• The perfect tool for cleanup of moldings

STATU30ACompression Test Kit• Tests compression on all major model vehicleplatforms, domestic and foreign with gasolineengines, including motorcycles, mini engines,snowmobiles, outboard motors, and more

• Features new patent pending Ford Triton enginecompression adapter that fits both the M16 sparkplug port and the new, redesigned M12 sparkplug port

• Quick coupler connection on gauge assembly for fast and easy changing of hose and adapter assemblies

• 68mm gauge has dual scale dial with ranges from 0-300 PSI and 0-21 Bar

• Gauge maintains highest compression test reading and resets to zero with a push button release valve

KTI78004400 Piece Black Nylon Tie Assortment• Convenient dispenser type package allowseasy access to each separate compartment

• Hundreds of uses including electrical, auto,marine, home and garden

• Made in the U.S.A.

KTI70344Harmonic Balancer Puller• Tool will pull harmonic balancers on most automobiles: large and small, import and domestic

• Pull parts with tapped holes, such asflywheels, gears and pulleys

• Tool includes 5 sets of side bolts• Made in the U.S.A.

WLT180016 Piece Tap Extractor Set• Sizes: 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2"

AMG186002 Ton Dual Ratchet Drive Cable Puller• Cable limiter which keeps 2 wraps of cable on the ratchet wheel• 2 ton double ratchet drive• 5 year warranty• Meets or exceeds ASME and OSHA specs

Blue Lightning 12" Blue Latex Gloves• 12" long, 15 mil thick• Reduced Latex Protein• Powder Free• Approved for medical use• Textured fingertips, smooth palm

BLGBLUE-M - MediumBLGBLUE-L - LargeBLGBLUE-XL - Xlarge

AMF574-50-GHHeavy Duty Emergency Truck Tire Inflator• 3/8" x 50 Foot PVC Hose Heavy Duty Truck Inflator Kit• For use on trucks with air brake systems• No need for truckers to be at an air pump to check and inflate tires• Hose kit connects to On-Board air brake system with universal glad hand (included)

MILS506Dual Head Chuck with Gauge• Includes bubble lens• 15" hose• 10 lbs. to 120 lbs. in 2 lb. increments• Heavy duty construction provides longservice life even with constant use

• Skin-packed

AMF15012" Standard Duty Tire Inflator• Straight-on tapered chuck (10 - 90 psi)• Boxed

Gloves

$13.25

$24.99

$157.69

$19.97

$28.69

$110.39

$34.59

Your Choice: $17.49

$24.15

$46.75

$30.00

10

HOT PRODUCTS

WLMW16112-1/4 Ton Trolley Jack with Blow Molded Case• 4,500 lb. capacity• 5-1/4" to 15-1/2" llift range• Steel lifting saddle with 360 degree swivel• Clean and easy storage with inlcuded blow molded plastic case

AMN67300Nut Buddy• Busts loose the most stubborn wheel nuts• Use on commercial or agricultural wheels• Gear ratio: 58:1• Rated output torque: 2950 ft lbs• Two sockets included: 1-1/2" (38mm) and 1-5/16 (33mm)

FLU77-4Digital Multimeter• Wide 1000 V measurement range• 10 amps continuous• Minimum / Maximum to record signalfluctuations

• Auto and manual ranging• Large display

ASSTOY640Toyota Oil FIlter Wrench• 64mm with 14 flats• Use in conjunction with a 24mm or 15/16" socket• Made in the U.S.A.

MILS448Tire Tread Depth Gauge• Round aluminum indicator barcalibrated for 0 to 1" in 1/32" markings

• Handy pocket clip

KDT3962Brake Lining Thickness Gauge• Color coded brake gauge indentifies thickness levels for brake lining inspection

• All steel construction• Metric Gauges - 8mm, 10mm and 12mm (Green), 4mm, 5mmand 6mm (Yellow), 2 and 3mm (Red)

• SAE Gauges - .3150 to .4720" (Green), .1575 to .2382" (Yellow),and .0787 to .1181" (Red)

• All gauges fastened together for ease of use

TIT21006Professional Workbench• Heavy duty• Durable powder coated finish• 1,200 lb weight capacity• 13 gauge steel• Full bottom shelf• 60" x 31" x 34" and weighs 150 pounds.

KAS13809CAT III Digital Multimeter• Tests AC / DC Current and Voltage• Continuity, resistance, and diode testing capabilities• 600V CAT III Rated• 20Mega Ohm resistance• Continuity Buzzer and other basic DMM features

AMM8500Brake Drum Micrometer• 6" - 16.125"• .005" graduation

IPA78937 Way Flat Pin Trailer Circuit Tester• Quickly and easily test trailer circuits on most light tomedium duty trucks and campers

• Tests vehicle circuits on 7 Flat/Spade Pin connections- quickly identifies faulty circuits

• Made from LEDs and ABS plastic - ensures durability• 1 Year Limited Warranty

$70.95

$199.99

$414.29

$17.25

$4.65

$20.50

$379.99

$30.06

$411.00

$29.69

11

HOT PRODUCTS

KTI71000Hose Reel 3/8" x 50 Foot• All steel contruction • Slotted mounting base - easy install • Spring powered auto recoil • 8 position ratchet system• 50 foot red rubber air hose 3/8" I.D. • PVC bend restrictor• Solid brass ferrule, 1/4" male NPT.• 300 PSI

ACAACR802R3/8" Drive Large "Quiet" Air Ratchet• The quietest ratchet on the market today at 82 dba.• The AIRCAT® tuned exhaust system keeps air directed awayfrom the operator.

• 90 ft lbs. maximum torque and 70 ft lbs. working torque• Ergonomic handle and trigger for ease of use for the operator• Assembled in the U.S.A.

ACAACR800R1/4" Drive "Quiet" ReversibleMini Air Ratchet with Red Composite Handle• 50 ft./lbs. maximum torque• 82 dBA sound level• 230 RPM free speed• Weight 1-1/4 lbs.• Air consumption 6.2 CFM at 90 PSI operating pressure

MTN976224" Deluxe with /90° Angled Nozzle Blow Gun• Excellent for cleaning moldings or delicate surfaceswhere a metal tip might scratch or harm critical areas

• Includes OSHA approved tip

ACA6255RRight Angle Die Grinder Red• Lightweight • Angle gear mechanism• 20,000 RPM Free Speed• 90 PSI Air Pressure • 82 dBa

ACC10-03218 Piece 1/2" Drive Torque Socket Set• Patented strobe marks stop turning at precisely thecorrect torque every time

• Manufactured with Swedish spring steel• Solid one piece construction• Deep well sockets for those special applications whereregular socket depth is just not enough

• ISO 9001 certified and covered by a lifetime guarantee

ACC10-032210 Piece 1/2" Drive Torque Socket Set• Patented strobe marks stop turning at precisely the correct torque every time

• Manufactured with Swedish spring steel• Solid one piece construction• Deep well sockets for those special applications whereregular socket depth is just not enough

• ISO 9001 certified and covered by a lifetime guarantee

WLMW1001111 Gallon Portable Air Tank• 125 PSI maximum• Lightweight, portable with handle for easy transport

• Safety pressure bypass valve with manual override

• On/Off air adjustment dial• Industrial air hose with standard tire air chuck

LEGHFZ3825YW2Flexzilla™ ZillaGreen™ 3/8" x 25' Air Hose with 1/4" Threads• Extreme all-weather flexability, even insub-zero temperatures

• Excellent abrasion-resistant outer cover• No memory, lays flat• Kink resistant under pressure• Includes bend restrictors that reduce wearand tear, prolonging the life of the hose

CPT7150Air Hammer• Pistol Grip • Heavy Duty• .401 Shank • 2,300 BPM• Longer Piston Stroke for More Power

CPT8751/4" 90 Degree Angled Air Die Grinder• Compact, lightweight design for easy maneuverability• 90 degree angle head allows flexibility in confined areas• Complete with 1/4" and 6mm collet• Excellent for high speed blending, smoothing, portingand deburring in confined areas

• Lock-off throttle to prevent accidental start up

CPT7111Air Hammer• Powerful and Cost Effective• Standard 0.401 Round Shank• Easy Change Retainer for Quick Accessory Changing

$139.99

$135.95

$123.19

$11.59

$114.99

$284.21 $358.93

$69.47

$25.75

$84.99

$79.15

$65.50

HOT PRODUCTS

SUN97077 Piece SAE Jumbo Combination Wrench Set• High density, dropped forged steel for strength and comfort

• Raised panel design• Comes with sturdy metal clip for storage• Wrenches guaranteed and available either as a set or individually

Set includes sizes: 1-5/16", 1-3/8", 1-1/2", 1-5/8", 1-3/4", 1-7/8" and 2".

SUN991414 Piece Angled Wrench Set• Canvas pouch included• Fully polished drop forged alloy steel• 15 degree and 60 degree angled endsfor added convenience

• Wrenches are fully guaranteed• Sizes: 9/16" to 1-1/4"

SUN991514 Piece V-Groove SAE Combination Wrench Set• Fully polished drop forged alloy steel• V Groove design reduces wear on fasteners• Canvas pouch included• Fully guaranteed

Set includes sizes: 3/8" to 1-1/4".

TIT110753 Piece Extra Long Flex-Head Ratchet Set• 36 fine-tooth ratchet mechanism designed for fast performance• Less than 10 degree sweep for use in tight spots• Quick release feature holds socket and push button action release• Chrome vanadium steel

Includes one 1/2" drive ratchet, one 3/8" drive ratchet, and one 1/4" drive ratchet. Lifetime warranty.

Extra Long Flex-Head Quick Release Ratchets• Extra-long flex-head design for hard-to-reach fasteners• 36-tooth gear-drive ratchet mechanism for high torque applications• Quick-release feature holds sockets when you want them - lets go when you don't• Contoured cushion grip handle• Packaged on hang tab

TIT11073 - 3/8” Drive TIT11072 - 1/2” Drive

CHA39053171 Piece Mechanic's Tool Set• 1/2", 3/8" and 1/4" drive 72 gearteeth quick release ratchets

• Flat panel, full polish SAE and Metriccombination wrenches

• 1/2", 3/8" and 1/4" drive, chromevanadium standard and deep sockets

• SAE and Metric hex keys• Durable storage case

CHA39068158 Pieces Mechanic's Tool Set• 3/8" and 1/4" drive 72 gear teeth quick release ratchet

• Full Polish SAE and Metric Combination Wrenches• 3/8" and 1/4" drive chrome vanadium standardand deep sockets

• SAE and Metric hex keys• Durable storage case

KTI220953/8" Drive 11-3/8" Pro-Series Long Handled Chrome Ratchet• Thumb lever directional switch allows easy one-handed socket removal• Knurled handles for non-slip grip• Push button release for fast socket changes• Fine tooth ratchet mechanism enables access to tight places• High polish chrome finish

KTI2200020 Piece 3/8" Drive 6 Point SAE Socket Set• All sockets are made of chrome vanadium• Packaged in a blow molded case

Includes 9 short sockets form 3/8" to 7/8", 8 deep sockets from 3/8" to 13/16", pushbutton ratchet and 2" and 3" extensions.

KTI2300016 Piece 1/2" Drive 6 Point SAE Shallow Socket Set• Manufactured with heat treated chrome vanadium steel• Packaged in a blow molded case

This set includes 13 sockets from 7/16" thru 1-1/4", ratchet, breaker bar and extension.

Head

Angled

KAS349512 Piece Combination Interior/Exterior Retaining Ring Pliers Set• Includes 12 fixed tips with sizes: .038, 0.047, .070, .090 in zero, 45, and 90 degree angles

• Pliers are convertible for use on internal and external snap rings

• Cushioned grip handles• Knurled center screw for easy changing & secure hold• Made in U.S.A.

12

$139.50

$73.55

$79.67

$93.79

$188.95$154.99

$41.39

$63.96

$91.59

$30.79$54.99

$107.75

13

HOT PRODUCTS

KDT8006620 Piece Master Dual Material Screwdriver Set• Dual material handle for comfort andperformance

• Tri-Lobe ergonomic handle to obtainoptimal balance of strength and comfort

• Oil and solvent resistant • “Speed Zone” for turning in lower torque applications • Laser etched part number and size on each blade

KDT800594 Piece Long Dual Material Screwdriver Set• Features dual material handle for comfort and performance• Features Tri-Lobe ergonomic handle for optimal balance of strength and performance• "Speed Zone" at base of handle allows faster turning in low back torque applications• Black oxide non slip grip for better grip on fasteners• Extra long shank sizes for greater access

KTI199008 Piece Green Screwdriver Set• Tools feature high quality chrome vanadium blades, heavy duty green handles and hex bolsters for wrench assist

• Packaged with plastic tray

Sizes include: #1 Phillips 3" blade; #2 Phillips 1-1/2" stubby; #2 Phillips 4" blade;stubby slotted; 3" slotted; 4" slotted; 6" slotted; 8" slotted.

TIT1724010 Piece Screwdriver Set with Magnetic Dish and Pick-Up Tool• Chrome vanadium shafts with magnetic tips• Handle holes to hang for storage• 8 assorted slotted, phillips and square drive screwdrivers• Mini magnetic parts dish• Telescoping magnetic pick-up tool

KTI2150012 Piece Master Tamper Proof Torx Bit Set• Heat treated alloy steel• Sized for all automotive applications• Laser engraved for quick identification • Made in U.S.A.

Set includes 1/4" drive in T10, T15, T20, T25, T27, T30 sizes and 3/8" drive in T40, T45, T50,T55 sizes. Set includes ten (10) hex insert bits and two bit holders.

KTI521077" Heavy Duty Diagonal Cutting Pliers• Cutter designed for heavy duty applications• Manufactured from chrome vanadium steel• Ergonomic vinyl handle for user comfort

KTI530088" Slip Joint Pliers• Designed for gripping and turning round objects• Manufactured from chrome vanadium steel with chrome finish

• Ergonomic vinyl handle for user comfort

VGP05T10WR Fast Release™ Curved Jaw Locking Pliers with Wire Cutter• Fast Release™, 2x easier to open, no-pinch release, and offers more finger room• Curved jaw puts tremendous pressure on four points of any style nut or bolt head• The non-slip ProTouch™ grip provides comfort and leverage while reducing vibrationsand hand fatigue

• Ideal for tightening, clamping, twisting and turning• High-grade heat treated alloy steel for maximum toughness and durability

VGP9LN9" Long Nose Locking Pliers with Wire Cutter• Long, straight nose provides easy access in narrow, hard to reach places• Ideal for tightening, clamping, twisting and turning• Turn screw to adjust pressure and fit work; stays adjusted for repetitive use• High-grade heat-treated alloy steel for maximum toughness and durability• Hardened teeth are designed to grip from any angle

KTI5511212 Piece Universal Snap Ring Plier Kit• Versatile, heavy duty pliers are designed for theremoval and installation of either internal orexternal snap rings on a wide range ofapplications

• Includes the four most popular sizes in straight, 45 and 90 degree angle configurations

• Made in the U.S.A.KTI190008 Piece Black Phillips and Slotted Screwdriver Set• High quality chrome vanadium blades• 3 Phillips and 5 slotted with hexbolsters for wrench assist

• Packaged with plastic tray

$21.94

$118.29

$49.95

$17.00$29.89

$10.79

$9.79

$17.65

$18.59

$21.94

$169.99

14

HOT PRODUCTS

GRE1726M1/2" Dr. 26 Piece Standard Length Metric Set - 12 PointSizes: 10mm to 36mm

GRE1726MD1/2" Dr. 26 Piece DEEP Length Metric Set - 12 PointSizes: 10mm to 36mm

GRE17191/2" Dr. 19 Piece Standard Length Fractional Set - 12 PointSizes: 3/8” to 1-1/2” in

GRE1719D1/2" Dr. 19 Piece DEEP Length Fractional Set - 12 PointSizes: 3/8” to 1-1/2” in deep length.

1/2" Dr. Standard Length Sets - 12 Point• Made of high quality steel (chrome-molybdenum)• Engineered for use with impact tools, using the most up to date industrial specifications• Transfer pressure from the thinnest part of the socket wall to the thicker section,resulting in increased strength

• Packaged in a molded storage case• Lifetime Warranty

GRE1430MRD1/2" Drive 30 Piece Standard/Deep Metric Set• Made of high quality steel (chrome-molybdenum)• Engineered specifically for use with impact tools, using the most up to date industrial specifications

• Made to transfer the pressure from the thinnest part of the socket wall toward the thicker section, resulting in increased strength

• Lifetime Warranty• Sizes: 10mm to 24mm in standard and deep length• Includes 1/2" x 1/2" Universal Joint & 3" Extension

KTI73510Black Electrical Tape• 3/4" x 60" sleeve of 10 rolls

AAM82005V100 Photometric Headlight Aimer• Built in digital display for easy step by stepinstructions

• Uses laser alignment technology - no alignmentvisor needed

• Meets or exceeds SAE J-599 and J-600specifications, approved in all states and Canada

• Uses rechargable Ni-Cad batteries• Easy to use, simple three step aiming process

FJC43658Radiator and Radiator Cap Pressure Test Kit• For use in testing radiators and radiator caps• Confirms radiator leaks and cooling system leaks• Test radiator caps for proper operation

KDT145Radiator Hose Pinch-Off Pliers• Tool can be used to pinch off some emission system hoses• Pliers include automatic locking ratchet• Do not use on wire-reinforced hose

CEN121CPSuper Bounce Light with 25 Foot Cord• Bounces instead of breaking• Features patented Bounce-Bulb technology• Heavier housing and end caps for improved durability• Unique two piece end cap construction for improved protection• Cold weather cord - 18/2 SJEOW for superior cold weather flexibility

Ask your salesman aboutour great lease options

$104.65

$184.29

$128.39

$235.00

$157.89

$16.29

$1,799.00

$252.15

$21.39 $69.99

HOT PRODUCTS

15

WLMW5202407 Piece SAE O-Ring Assortment Kit• Use in plumbing, hydraulics, air, and gas connections• Assortments come in a convenient resealable plastic case• Stores great in your shop or toolbox

WLMW5203419 Piece Metric O-Ring Assortment Kit• 419 O-Rings in 32 popular metric sizes• All included in a convenient resealable plastic case• Contains 32 sizes of O-Rings from 1.5 section to 3.5 section

WILWS88 inch Shop Vise, • 8" Jaw Width, 8" Jaw Opening, 4" Throat Depth• Replaceable serrated top jaws• 360° swivel base with double lockdown for quick and easy positioning

• Designed for general duty applications• Built in pipe jaws handle various pipe sizes• Rubber pinch point safety guards

WLMW5201270 Piece HNBR O-Ring Assortment Kit• Kit Contains 18 popular O-Ring sizes• Hydrogenated Nitrile Butadiene Rubber (HNBR), also knownas Highly Saturated Nitrile (HSN) is special class of nitrilerubber (NBR) and is for mission critical applications

• Application temperatures ranging between -45°C and 165°C• HNBR is classified by ASTM as DH-type polymer

SGT18900Professional Ratcheting Terminal Crimper• Ratcheting action ensures a perfect crimp every time• Eliminates damaged or distorted terminals• Crimps 10-22 gage insulated terminals• Superior design and construction outperforms other crimping tools• Replaceable crimping jaws

UNI6200GoJak® Model 6200™ Auto Jack/Dolly• Able to jack vehicle weights to 6,200 lbs. (1,550 lbs. per wheel), including light dutytrucks with tire widths up to 13" wide and 36" tall

• Steel rollers, wider axles and two heavy duty 5" diameter, and two heavy duty 4"diameter, double-ball raceway casters

• 5 degree offset pedal for additional foot-to-tire clearance• Under frame clearance is increased an additional 2-1/2" over the 5000 series, which isvery useful when pulling cars up flatbed trucks

IRW208430050 Pack Bi-Metal Razor Blades

IRW2084100Bi-Metal Blue Blade™Utility Blades (5 Pack)• Patented Bi-Metal technology; sets new standardsof performance

• Unbreakable (under normal working conditions) - spring steel body delivers superior flexibility toprevent breaking

• Last longer - high speed steel cutting edge stayssharp longer than traditional carbon utility blades

• Fits most utility knives

LIN11322 Way Loading Lever Action Grease Gun with 5" Extension• Includes 5" extension with coupler• Lube capacity 16oz. bulk,/14.5oz. cartridge• Length is 15-1/2"• The output is 1oz. per 33 strokes

TADAF44L6 Piece Dura-Block Sanding Kit• Uniform machined surfaces• Hard surface tension• Multiple blocks in one kit covers a variety of jobs• Flexible

KLE1005Crimping/Cutting Tool for Non Insulated and Insulated Terminals• Accommodates wire from No. 10 to 22 AWG• Specially hardened wire cutter in nose• Tapered nose design for working in confined spaces• Crimping die marked for insulated & non-insulated solder less terminals & connectors• Plastic-dipped, cushioned handles for comfort

KLE2006Large Compound-Action Crimp Tool• Crimps 6-4/0 awg lugs and terminals• All-in-one, integral crimp nest- no removable parts or rotating dies!• High leverage handles and compound-action mechanism for superiormechanical advantage

• Ultra-comfortable hand grips for easy use• Adjustment screw allows user to control crimp depth

$39.65

$251.70

$319.00

$48.15

$13.87

$14.60

$332.25

$8.15

$28.59

$19.45

$2.05

$61.50

Visit us on the web: www.toolweb.comPricing Good Through 10/31/14 Quantities Limited

This advertisement was prepared in advance, therefore merchandise availability is subject to delivery by manufacturersas scheduled. All advertised items are not stocked by all stores. Not responsible for typographical or pictorial errors.Quantities limited. CAUTION: Always wear appropriate safety equipment and observe safety advice and proper use of

equipment as instructed in warning and caution labels and operational instructions.

MLK432600Universal Press Disc Kit With Case• Ideal for use with combination of the MLK432650 Universal Press Support Setand a shop press

• High quality universal tool set for pressing in and out• Use on wheel bearings, bushings, shaft seals, and more• Includes high quality and sturdy carrying case

External/Internal Thread Repair Sets• One hand tool restores inch or metric, right handed or left handed fastener threads• No need for calibration or identifying thread types• Floating cutters are self-adjusting to any pitch and size within range

ANGNES1015 - 3 PieceSet comes with one external and two internal tools. The Nes 1A external thread repair,which has a working capacity from 5/32" - 11/16". Also the Nes 21 and Nes 22internal tools, which have a working capacity from 5/16" - 7/16" and 1/2" - 5/8".

ANGNES1017 - 4-PieceSet comes with one external and three internal tools. The Nes1A external thread repair,which has a working capacity from 5/32" - 11/16". Also the Nes21, Nes22 and Nes23internal tools, which have a working capacity from 5/16" - 7/16", 1/2" - 5/8", and11/16" - 13/16".

ANGNES1025 - 6-PieceContains external NES1A and NES2 with a working capacity of 5/32" - 1.1/2" andInternal NES21, NES22, NES23 and NES24 with a working capacity of 5/16" - 1.1/4".

KTI7331226 Watt Fluorescent Angle Work Light• Fluorescent work lights are cool to the touch and energy efficient

• Utilize a standard 13 watt bulb• UL and CUL approved • Circuit breaker protection• 360 degrees swivel magnet, rotating clip forhanging and features protective bumper andspecial ergo grip

• Equipped with power indicator lamp in handle

AULAL319AutoLink® OBDII/CAN Code Reader with Color Screen• Retrieves generic (P0, P2, P3, and U0), manufacturerspecific (P1, P3, and U1) codes, and pending codes

• Features the unique patented One-Click I/M ReadinessKey for quick State Emissions readiness check anddrive cycle verification

• Displays DTC definitions on the TFT color screen• View freeze frame and live data• Multilingual menu and DTC definitions (English,Spanish, and French)

The AutoLink® AL319 OBD II/EOBD Code Readerfeaturing the unique patented One-Click I/M ReadinessKey, TFT color display, and built in speaker, theAutoLink® AL319 is truly the ultimate in easeand affordability, enabling users to verifyrepairs, road test, check State EmissionMonitor Status and solve basic engine anddrivability problems. It eliminates drive cycleguesswork by notifying the driver with colorcoded LEDs, audible tone, and dynamic all-in-one I/Mreadiness status. Limited one year warranty. Packageincludes user's manual, CD software and USB cable.

KTI75306Steel Line Stopper Kit• Universal steel line stopper• 5/16", 3/8", 1/2", and banjo fittings (10.4mm and 18mm)• Suitable for clamping and sealing steel lines for all automotive fluids• Provides an effective seal to steel lines when disconnected• Prevents fluid loss and contamination of the work area

Seal steel lines when disconnected

NEW

NEW

NEW

$319.00

$209.99

$273.55

$457.49

$64.36

$69.95

$45.69