TRUMPF TRUMATIC TC 6000 L FMC 1300 - … · (X x Y) without repositioning when combined punching /...
Transcript of TRUMPF TRUMATIC TC 6000 L FMC 1300 - … · (X x Y) without repositioning when combined punching /...
KISTNER GmbH & Co. KG
Industriestraße 7-9 D-95349 Thurnau
Tel. (+49) 9228 987-0 [email protected] www.maschinen-kistner.de
TRUMPF TC 6000 L FMC - 1300
LIST OF CONTENTS
Machine info …………………………………………………….……………………………..…………………………………………….…..…..……….
Technical data …………………………………………………………………………………..……………………………..….………………………. Machine pictures …………………………………………………………………………………………………….……………………….……….
Floor plan …………………………………………………………………………………………………………………..………………..……………………...
3 4 7 9
TRUMPF TC 6000 L FMC-1300 | | 2
2
MACHINE INFO
| 3
Manufacturer
Type
Year of manufacture
Control
Machine number
Laser power
with SheetMaster
TRUMPF TC 6000 L FMC-1300 |
| 4
TECHNICAL DATA
Work area
(X x Y) without repositioning when combined punching / laser operation Performances
Max. sheet thickness
Max. punching force
Active presser foot (programmable in steps)
Max. tool weight (2 claws)
Max. tool weight (3 claws)
Max. headroom
in punching operations
in laser operations Max. speeds
X-axis
Y-axis
Simultaneous (X and Y)
Stroke rate punching
Stroke rate signing
C-axis: punching thread forms Tools
Linear magazine
Number of tools with Multitool 3 claws
Rotation of all tools
Tool change time
Max. punching diameter: Single stroke Max. forming height Programmable parts chute
Max. piece size
TRUMPF TC 6000 L FMC-1300 |
| 5 TRUMPF TC 6000 L FMC-1300 |
TRUMPF CNC control
Color monitor
Hard disk space
Floppy drive
Platform Laser power (programmable in 1%-steps)
TLF 2700 Gating frequency (programmable in 10 Hz-steps)
Beam mode Max. sheet thickness
Structural steel O2
Stainless steel N2
Aluminium alloys N2 Consumptions
Laser gases CO2 N2 He
Cutting gases O2 N2 Electrical connection
with TLF 2700 (incl. cooling device) Pneumatic connection
Supply pressure
Max. compressed air consumption Dimensions and weights (ca.)
Space requirements (LxWxH)
Weight without SheetMaster
| 5 TRUMPF TC 6000 L FMC-1300 |
AUTOMATION COMPONENTS
TRUMALIFT SheetMaster FMC 1306
For automatic loading of raw boards and unloading of processed workpieces
TRUMATOOL 40
Automatic tool handling system to extend the tool capacity to 40 magazine places
TRUMAGRIP 1300
For the automatic disposal of residual strips or skeleton
TRUMASORT R4
Automatic sorting equipment including 4 containers for workpieces, which are unloaded through the programmable small part removal chute
TRUMASORT L
Automatic sorting device, consisting of a four-stranded chain conveyors for workpieces that are unloaded through the TRUMALIFT SheetMaster on 4 or 6 Euro-pallets. TRUMASORT L 4/6 longitudinal (Euro-pallets X=800 mm; Y= 1.200 mm)
MACHINE PICTURES
| 7 TRUMPF TC 6000 L FMC-1300 |
| 8 TRUMPF TC 6000 L FMC-1300 |
FLOOR PLAN
| 9 TRUMPF TC 6000 L FMC-1300 |
Thank you very much for your interest
*We do not guarantee the accuracy and completeness of these documents. We further do not assure any characteristics and qualities. The named machine, which is up for sale, is used.*