COIL-FED PUNCHING & BENDING

INSIDE LEFT

PUNCHPRESS & SERVOBEND SYSTEMS

PunchPressThe RDI Coil-Fed PunchPress is a highly fl exible, modular punching system that uses standard turret tooling. Dramatic productivity increases can be realized over traditional sheet fed turret type presses, while reducing material and labor costs. The PunchPress can also be used to replace the traditional stamping press for short run fl exibility without the tooling and related costs.

This fl exible PunchPress system can be completely automated for lights out production with available stacking and material handling equipment. Easily programmed offl ine from CAD drawings, the RDI Coil-Fed Punching System provides dynamic on the fl y programming allowing one job to fl ow into the next for continuous production. The scrap rate is greatly reduced when compared to nesting on individual sheets.

The complete line consists of a coil loading station, uncoiler, leveler, a servo roll feed, and the PunchPress System. Finished parts can be handled in many different ways, including manual part stacking, gantry robot for pallet stacking, or six-axis robot cell for advanced packaging requirements.

ServoBendThe RDI ServoBend automated bending line features all servo controlled bending stations, capable of bending 4 edges simultaneously. Servo controlled bending is faster, more fl exible and cleaner than traditional hydraulic controlled bending. This ServoBend is a true up/down bending system, capable of consistently producing complex parts faster than other bending systems or press brakes.

The RDI ServoBend System can be used on its own, or combined with the RDI Coil-Fed Laser or RDI PunchPress Systems. Combine these cutting and bending technologies together to easily do the work of 2-3 turret presses and 4-6 press brakes using a single operator. Add a stacking system, for the fastest unattended fabricating system on the market. The result: a dramatic reduction in the scrap rate, material handling and material costs.

SERVOBEND SYSTEMS

INSIDE CENTER

KEY BENEFITS• Increase Production – Continuously cut parts from coil• Bend Four Sides Simultaneously – Does the work of 5-6 press brakes• Reduce Scrap• Increase Material Savings – Coiled metal is less expensive than sheet• Reduce Labor – One operator for the entire system• Finished Parts Handling – A wide variety of stacking and secondary operations available• Lights Out Operation

Typical punched and/or bent parts, both positive and negative, can be processed on coil-fed lines.

The RDI Group, a global leader and parent company of Reichel & Drews, Chicago Slitter, RDI Laser Blanking Systems, RDI Punching & Bending Systems, and RDI Enclosures & Systems, specializes in the design and manufacture of industrial systems for diverse, worldwide markets including asphalt roofing, construction, telecommunications, power and metal coil processing industries. A respected leader in custom built machinery, The RDI Group has been helping customers improve productivity and profits for more than 110 years. The RDI Group is headquartered in Itasca, Illinois, USA with a sales and technology business unit in Bamberg, Germany and sales office in Beijing, China.

Our mission in simple:

Build Great Machines

International Headquarters1025 West Thorndale Avenue

Itasca, Illinois, USA 60143 T | +1 630-773-4900 F | +1 630-773-3414

E | info@therdigroup.com www.therdigroup.com