Tripura State Electricity Corporation Limited - tsecl.in · Tripura State Electricity Corporation...

Deputy General Manager (Civil)Signature of contractor with full name. Transmission Circle

79-Tilla, Agartala.

1

Tripura State Electricity Corporation Limited(A Government of Tripura Enterprise)Deputy General Manager (Civil)

Transmission Circle79-Tilla, Agartala.

Volume-II

PRICE BID

Name of work: - Transmission Project (Phase-I); 400 KV Sub-Station at Surjamaninagar (to be charged at 132 KV) and infrastructure development, West Tripura District/ SH:- Infrastructure Development - Construction of Conference Hall at Surjamaninagar Grid Sub-Station.

D.N.I.T. No.: - DNIT / DGM (Civil) /TC / 2016-2017 / 16 Date: - 17.08.2015

P.N.I.T. No.: - DGM (Civil) /TC / 2016-2017 / 06 Date: -31.08.2016

Estimated cost: - Rs.76,34,480.00 (Rupees Seventy-Six Lacs Thirty-four Thousand Four Hundred and Eighty) only.

Earnest money: - Rs.1,52,690.00 (Rupees One Lac Fifty-Two Thousand and Five Hundred Ninety) only.

Completion Period: - 180 (One Hundred Eighty ) days.

[This Price Bid contains 22 (Twentytwo ) pages including cover pages].


79-Tilla, Agartala.

2

- B L A N K -


79-Tilla, Agartala.

3

SECTION - VIII

“A”BILL OF QUANTITIES

ANDPRICE BID


79-Tilla, Agartala.

4

- B L A N K -

SCHEDULE


79-Tilla, Agartala.

5

PRICE BID

Name of work: - Transmission Project (Phase-I); 400 KV Sub-Station at Surjamaninagar (to be charged at 132 KV) and infrastructure development, West Tripura District/ SH:- Infrastructure Development - Construction of Conference Hall at Surjamaninagar Grid Sub-Station.

SLNo

PARTICULARS OF ITEMS QNTY UNIT RATE AMOUNT

GROUP-A (CIVIL WORKS)

A SUB-HEAD : DISMANTLING AND DEMOLISHING WORK

1 Demolishing reinforced cement concrete manually / by mechanical means including stacking of steel bars properly and disposal of unserviceable material with all lifts and upto 50 m lead etc. complete as per direction of the Engineer- in-charge.

3.833 Cum

`.583.20

`.2,235.00

2 Demolishing brick work including stacking of serviceable materials and disposal of unserviceable materials with all lifts and upto a lead of 50m etc. complete as per direction of the Engineer- in-charge:-

12.00 Cum

`.335.60

`.4,027.00

B SUB-HEAD : EARTH WORK

3 Earth work in excavation over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.

All kinds of soil

a) By Mechanical means 3000.00 Cum `.90.30 `.2,70,900.00

4 Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

a) By manual means 97.200 Cum `.113.40 `.11,022.00

5 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

a) All kinds of soil 64.800 Cum `.48.80 `. 3,162.00

6 Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.

5.400 Cum 424.40 2,292.00

C SUB-HEAD : CEMENT CONCRETE WORK

7 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shutteringAll work up to plinth level.


79-Tilla, Agartala.

6a) 1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone

aggregate 20 mm nominal size)8.10 Cum `.6,004.40 `. 48,636.00

8 Centering shuttering including strutting, propping etc. and removal of form work for:

a) Foundations, footings, bases for columns. 11.70 Sqm `. 131.50 `.1,539.00

D SUB-HEAD : RCC WORK

9 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement.

a) All work up to plinth level.

i) 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)

18.90 Cum `.6,908.20 `.1,30,565.00

10 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement-

a) In walls (any thickness), including attached pilasters, buttresses, piers, abutments etc.


1.508 Cum `.7,115.20 `.10,730.00

b) In plinth and skirting courses, fillets, columns, pillars, posts and struts


35.721 Cum `.7,296.40 `.2,60,635.00

11 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centring, shuttering, finishing and reinforcement-

a) RCC work in suspended floors, roofs having slope up to 15° landings, balconies, shelves and chajjas.


64.573 Cum `.7,168.70 `.4,62,904.00

12 RCC work in beams, lintels, bands, plain window sills, staircases and spiral staircases excluding precast spiral staircase.

a) 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)

43.06 Cum `.7,181.40 `.3,09,231.00

13 Providing and laying upto floor five level reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers facias and eaves boards excluding the cost of centring, shuttering, finishing and reinforcement-

a) 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)

3.50 Cum `.8,110.80 `.28,388.00

14 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor five level.

a) Thermo-Mechanically Treated bars/ Cold twisted deformed steel bars

19650.00 Kg. `.63.30 `.12,43,845.00

15 Centering shuttering including strutting, propping etc. and removal of form work for:

a) Foundations, footings, bases for columns etc. for mass concrete with timber plank

99.30 Sqm. `.135.90 `.13,495.00


79-Tilla, Agartala.

7b) Walls (any thickness ) including attached pilasters,

buttresses, plinth and string courses etc. using shuttering ply

28.32 Sqm. `.216.00 `.6,117.00

c) Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply

422.83 Sqm. `.225.20 `.95,221.00

d) Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply

385 Sqm. `.205.60 `.79,156.00

e) Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply

221.13 Sqm. `.275.80 `.60,988.00

f) Stairs (excluding landings) except spiral-staircases with wooden plank

18.24 Sqm. `.241.40 `.4,403.00

g) Weather shade, Chajjas, corbels etc., including edges.

19.95 Sqm. `.254.70 `.5,081.00

E SUB-HEAD : BRICK WORK

16 First class brick work in foundation and plinth including cost of all materials as required complete.

a) In cement mortar 1:6 ( 1 cement : 6 fine sand ). 20.18 Cum `.3,815.70 `.77,001.00

17 First class brick work in superstructure above plinth level & up to floor-five level including cost of all materials as required complete.

a) In cement mortar 1:4 ( 1 cement : 4 fine sand ). 73.8375 Cum `.4,355.20 `.3,21,577.0018 Half brick masonry with first class bricks in

superstructure up to floor five level including cost of all materials as required complete:-

a) In cement mortar 1:4 ( 1 cement : 4 fine sand). 75.315 Sqm. `.577.80 `.43,517.00

19 Brick soling:-

(i) Flat Brick soling: Providing and laying flat brick soling layer on prepared sub grade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 KN as per MoRD Technical Specification Clause 412.

400.00 Sqm. `.241.40 `.96,560.00

(ii) Brick edging laid length wise: Providing and laying brick edging laid lengthwise on prepared sub grade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 KN as per MoRD Technical Specification Clause 412.

80.00 Mtr. `.34.40 `.2,752.00

F SUB-HEAD : WOOD WORK

20 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

5.67 Sqm. `.1,130.50 `.6,410.00

21 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete.

a) Fixed to openings /wooden frames with rawl plugs screws etc.

882 Kg. `.83.50 `.73,647.00


79-Tilla, Agartala.

822 Providing and fixing aluminium sliding door bolts

ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

a) 300 x 16 mm 7 Nos. `.217.40 `.1,522.00

23 Providing and fixing ISI marked aluminium tower bolts anodised (anodised coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with necessary screws etc. complete as per clauses of Chapter - 9 of CPWD specification.

a) 300 x 10 mm 14 Nos. `.115.50 `.1,617.00

24 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

a) 125 mm 14 Nos. `.54.90 `.769.00

25 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

a) Single rubber stopper 6 Nos. `.40.60 `.244.00

26 Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mm thickness and shall be fixed to wall as per instructions of Engineer-In-Charge using 100x8 sheet metal CSK screws.

10.20Metr

e`.281.30 `.2,869.00

27 Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI ‘C sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric ‘L’ corners .The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer’s specifications and directions of the Engineer-in-charge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter).

3.78 Sqm. `.2,463.90 `.9,314.00

28 Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete.

6 No. `.752.70 `.4,516.00

G SUB-HEAD : STEEL WORK

29 Providing steel work in built up tubular trusses includng cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete as required:-

a) Hot finished welded type tubes 254.88 Kg. `.84.30 `.21,486.0030 Steel work welded in built up section/framed work

including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:-

a) In grating, frames, guard bar, railing, brackets, gates and similar works, all complete.

302.40 Kg. `.76.10 `.23,013.00


79-Tilla, Agartala.

931 Providing and fixing fan clamp type-I of 16 mm

dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying including painting the exposed portion of loop, all as per standard design complete.

24 Nos. `.105.10 `.2,522.00

32 Providing and fixing hand rail using structural steel etc. of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete as required:-M.S. tube 48.96 Kg. `.87.90 `.4,304.00

H SUB-HEAD : ALUMINIUM WORK

33 Providing and fixing aluminum work for doors, windows, ventilators, stair railing including hand rail and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides required PVC/neoprene felt etc. aluminumsections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineer in charge. (Glazing and paneling to be paid for separately) :-

a) For fixed portion of approved quality:-

i) Anodised aluminum (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).

181.80 Kg. `.402.90 `.73,247.00

b) For shutters/ sliding shutters of doors, windows & ventilators including providing and fixing hinges / pivots / rollers and making provision for fixing fittings wherever required including the cost of PVC / neoprene gasket required of approved quality ( Fittings shall be paid for separately):-

i) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15).

205.88 Kg. `.491.20 `.1,01,126.00

34 Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition frames with PVC / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge:-

a) With glass/ float glass panes of 4.0 m thickness ( weight not less than 10.0 kg / sqm) 31.14 Sqm. `.711.90 `.22,169.00

35 Providing and filling the gap in between aluminium frame and adjacent RCC / brick work by providing weather silicon sealant over backer rod of approved quality etc. complete as per architectural drawing and direction of the Engineer-in charge.

159.00Metr

e`.66.40 `.10,558.00

36 Providing and fixing stainless steel ( SS 304 grade ) adjustable friction window stay of approved quality with necessary stainless steel screws etc. to the side hung windows etc. complete as per direction of Engineer-in-charge:-255 x 19 mm 26 Nos. `.265.00 `.6,890.00


79-Tilla, Agartala.

1037 Providing and fixing aluminium round shape

handle of outer dia 100 mm with SS screws etc. of approved quality complete as per direction of Engineer-in-charge:-Anodised aluminium of grade AC 15 ). 64 Nos. `.59.80 `.3,827.00

38 Providing and fixing in position (including cutting & hoisting) in stainless steel pipe railing and hand rail in stairs of verandah etc.

a) 50 mm dia 22.00 Mtr. `.550.00 `.12,100.00b) 40 mm dia 43.20 Mtr. `.500.00 `.21,600.0039 Providing, fitting & fixing in position 4mm thick

aluminium composite panel (ACP) cladding of approved make, fabricated to flat, smooth curved to required radius,circular ring cladding to shape as per requirement( exterior / interior surface), in metalic colours using prefabricated aluminium extruded profiles of alloy-6063 T6 in chromatized finish to withstand the design wind pressure of 200 Kg/ sqm. The fastening brackets of aluminium/ hot dip galvanised with SS-304 screws, fasteners and anchor bolts complete with nylon seperators to prevent bi-metallic contacts. ACP sheets will be fixed with both ways Norton tape and Dow coring 995 structured sealant, including necessary scaffolding complete, as per approved architectural drawing, design and direction of the Engineer -in charge.

106.97 Sqm `.3,000.00 `.3,20,895.00

I SUB-HEAD : FLOORING AND SKIRTING WORK

40 Providing and laying polished vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08 % and conforming to IS : 15622 of approved make in all colours, shades over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. Size of tiles 60x60 cm.

383.53 Sqm `.1,261.50 `.4,83,823.00

41 Providing and fixing 1st quality ceramic glazed walltiles conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.

95.93 Sqm. `.652.00 `.62,546.00

42 Providing and laying 1st quality ceramic glazed floor tiles 300 x 300 mm conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in colours, shades such as white, ivory, grey, fume red, brown over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing

a) with white cement mixed with pigment of matching shade complete. 12.04 Sqm. `.763.40 `.9,191.00


79-Tilla, Agartala.

1143 Providing and fixing precast chequered cement

concrete tiles 22 mm thick, laid in footpath & courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete.

a) In dark shade using ordinary cement 42.50 Sqm. `.714.20 `.30,354.00J SUB-HEAD : ROOFING AND CEILING WORK44 Providing and fixing on wall face unplasticised

Rigid PVC rain water pipes (working pressure 4 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:

a) Single socketed pipe - 110 mm OD63

Metre

`.205.80 `.12,965.00

45 Providing and fixing on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:

a) Coupler

110mm 28 Nos. `.129.60 `.3,629.00b) Single equal tee without door

110 x 110 x 110 mm 14 Nos. `.242.00 `.3,388.00c) Single equal tee with door

110 x 110 x 110 mm 14 Nos. `.310.80 `.4,351.00d) Bend 87.5 degree

110mm 28 Nos. `.197.30 `.5,524.00e) Plain shoe

110 mm 14 Nos. `.365.20 `.5,113.0046 Providing and fixing unplasticised -PVC pipe clips

of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete.

a) 110mm 56 Nos. `.96.50 `.5,404.0047 Providing and fixing to the inlet mouth of rain water

pipe PTMT grating with thickness of 8mm and weighing not less than 100gm. complete.

a) 100mm 14 Nos. `.73.50 `.1,029.00


79-Tilla, Agartala.

1248 Providing and fixing at all height false ceiling

including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channelwith connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes,

finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification anddirection of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part I

185.76Sq.m

t.`.1,017.60 `.1,89,029.00

49 Extra for any sunk or raised mouldings in the plaster of Paris (Gypsum anhydrous) ceiling. 2.7

Sq.mt.

`.559.20 `.1,510.00

50 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.

a) 2mm thick corrugated (2.5" or 4.2" or 6") or step-down (2"or 3"or 6") as specified.

27.36Sq.m

t.`.919.40 `.25,155.00

K SUB-HEAD : FINISHING WORK

51 12 mm cement plaster in single layer including cost of materials required and finishing even and smooth and curing complete.


79-Tilla, Agartala.

13a) In cement mortar 1 : 4 (1 cement : 4 fine sand)

54.00 Sqm. `.90.20 `.4,871.00

b) In cement mortar 1 : 6 (1 cement : 6 fine sand) 421.03 Sqm. `.76.90 `.32,377.00

52 15 mm cement plaster in single layer including cost of materials required and finishing even and smooth and curing complete.

a) In cement mortar 1 : 4 (1 cement : 4 fine sand) 421.03 Sqm `.105.40 `.44,377.0053 6 mm cement plaster in single layer including cost

of materials required and finishing even and smooth and curing complete.

a) In cement mortar 1 : 3 ( 1 cement : 3 fine sand ) 526.07 Sqm. `.82.60 `.43,453.00

54 Neat cement punning. 108.00 Sqm. `.28.70 `.3,100.0055 Applying priming coat:

i) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel, galvanized iron / steel work.

25.20 Sqm. `.14.80 `.373.00

56 Painting with synthetic enamel paint ( two or more coats ) of required colour of approved brand and manufacture on new work to give an even shade.

25.20 Sqm. `.43.60 `.1,099.00

57 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

1895.02 Sqm. `.140.60 `.2,66,440.00

58 Wall painting with plastic emulsion paint ( two or more coats ) of required colour of approved brand and manufacture on new work to give an even shade.

1895.02 Sqm. `.51.20 `.97,025.00

59 Providing and fitting fixing of Godrej Make chairs as per direction of Engg-in-charge. 40 No `.6,900.00 `.2,76,000.00

60 Providing and fitting fixing of 40 seated conference table of Godrej make as per direction of Engg-in-charge.

1 No `.3,81,560.00 `.3,81,560.00

61 Providing and fitting fixing of Aquaguard water purifier as per direction of the Engg-in-charge.

2 No `.18,450.00 `.36,900.00

62 Providing of door mat as per direction of Engg-in-charge. 10 No `.1,000.00 `.10,000.00

63 Providing and fitting fixing door & window curtain including pelmet as per direction of the Engg-in-charge.

20 No `.2,000.00 `.40,000.00

L SUB-HEAD : SANITARY WORKS

64 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :

a) White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests.

1 Nos. `.3,587.00 `.3,587.00

65 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required :


79-Tilla, Agartala.

14a) W.C. pan with ISI marked white solid plastic seat

and lid. 1 Nos. `.5,244.50 `.5,245.00

66 Fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required :

a) Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. 1 Nos. `.4,961.70 `.4,962.00

67 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :

a) White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of L5 mm C.P. brass pillar tapswith elbow operated levers.

6 Nos. `.3,778.90 `.22,673.00

68 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required :

a) White glazed fire clay kitchen sink of size 600x450x250 mm. 1 Nos. `.3,118.60 `.3,119.00

69 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

a) Semi rigid pipe

i) 32 mm dia 3 Nos. `.73.00 `.219.00b) Flexible pipe

i) 32 mm dia 3 Nos. `.82.50 `.248.0070 Providing and fixing mirror of superior glass (of

approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

a) Rectangular shape 453x357mm 2 Nos. `.675.90 `.1,352.0071 Providing and fixing 600x120x5mm glass shelf with

edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

2 Nos. `.322.10 `.644.00

72 Providing and fixing toilet paper holder : (i) Vitreous china 2 Nos. `.322.60 `.645.00

73 Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms

2 Nos. `.194.00 `.388.00

74 Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colours weighing not less than 80 gms

6 Nos. `.194.40 `.1,166.00


79-Tilla, Agartala.

1575 Providing and fixing PTMT soap Dish Holder

having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms.

2 Nos. `.190.20 `.380.00

76 Providing and fixing soil, waste and vent pipes:

a) 100 mm dia.

i) Sand cast iron S&S pipe as per IS: 1729. 8.00 Metre `.657.40 `.5,259.0077 Providing and fixing M.S. holder-bat clamps of

approved design to Sand Cast iron/ cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. :

i) For 100 mm dia. Pipe 12 Nos. `.98.90 `.1,187.0078 Providing and fixing heel rest sanitary bend

a) 100 mm dia

i) Sand cast iron S&S as per IS - 1729 1 Nos. `.395.10 `.395.0079 Providing and fixing single equal plain junction of

required degree

a) 100x100x100 mm

i) Sand cast iron S&S as per IS - 1729 2 Nos. `.480.90 `.962.0080 Providing and fixing single equal plain junction of

required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.

a) 100x100x100 mm

i) Sand cast iron S&S as per IS - 1729 2 Nos. `.644.60 `.1,289.0081 Providing and fixing double equal plain junction of

required degree.

a) 100x100x100x100 mm

i) Sand cast iron S&S as per IS - 1729 2 Nos. `.717.20 `.1,434.0082 Providing and fixing collar:

a) 100 mm

i) Sand cast iron S&S as per IS - 1729 2 Nos. `.223.80 `.448.0083 Providing and fixing sand cast iron S&S offsets as

per IS: 1729

a) 152 mm offsets

i) With 100 mm dia. Pipe 2 Nos. `.702.30 `.1,405.0084 Providing and fixing terminal guard:

a) 100 mm

i) Sand cast iron S&S as per IS - 1729 2 Nos. `.238.60 `.477.0085 Providing lead caulked joints to sand cast

iron/centrifugally cast (spun) iron pipes and fittings of diameter:

a) 100mm 2 Nos. `.158.80 `.318.00M SUB-HEAD : WATER SUPPLY

86 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Inernal work - Exposed on wall.

a) 15 mm dia. nominal bore 45.00 Metre `.173.30 `.7,799.00b) 25 mm dia. nominal bore 30.00 Metre `.269.40 `.8,082.00c) 40 mm dia. nominal bore 18.00 Metre `.418.30 `.7,529.00


79-Tilla, Agartala.

1687 Making connection of G.I. distribution branch with

G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :

a) 25 to 40 mm nominal bore 2 Nos. `.220.00 `.440.0088 Providing and fixing C.P. brass bib cock of

approved quality conforming to IS:8931

a) 15 mm nominal bore 6 Nos. `.432.80 `.2,597.0089 Providing and fixing C.P. brass stop cock

(concealed) of standard design and of approved make conforming to IS:8931.

a) 15 mm dia nominal bore 6 Nos. `.436.90 `.2,621.0090 Providing and fixing gun metal gate valve with C.I.

wheel of approved quality (screwed end):

a) 25 mm nominal bore 2 Nos. `.390.50 `.781.00b) 40 mm nominal bore 1 Nos. `.549.40 `.549.0091 Providing and fixing gun metal non-return valve of

approved quality (screwed end):

a) 25 mm nominal bore

Vertical 1 Nos. `.436.50 `.437.00c) 40 mm nominal bore

Vertical 1 Nos. `.840.10 `.840.0092 Providing and placing on terrace (at all floor levels)

polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

1000 Litre `.7.90 `.7,900.00

93 Constructing masonry Chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:5 (1 cement :5 fine sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :

i) With Second Class bricks 2 Nos. `.1,112.00 `. 2,224.00

SUB-TOTAL (from A to M) `.65,00,811.00

GROUP-B (INTERNAL ELECTRIFICATION)

1Supplying & fixing of the following PVC conduit including necessary connection etc. as required. (Make:- Prastro-plast).

a) 25mm size 500 Mtr. ₹ 44.00 ₹ 22,000.00

b) 40mm size 100 Mtr. ₹ 106.00 ₹ 10,600.00

2

Supplying & drawing of the following PVC insulated copper conductor cable in existing PVC conduit including necessary connection etc. as required. (Make:- Finolexex/Plaza).

a) 2 X 1.5 sq.mm. 500 Mtr. ₹ 20.00 ₹ 10,000.00


79-Tilla, Agartala.

17b) 2 X 2.5 sq.mm. 800 Mtr. ₹ 28.00 ₹ 22,400.00

c) 2 X 4.0 sq.mm. 300 Mtr. ₹ 40.00 ₹ 12,000.00

d) 2 X 6.0 sq.mm. 210 Mtr. ₹ 60.00 ₹ 12,600.00

3Supplying & fixing of 102mm X 102mm size wooden formica board with bakelite cover / PVC board make Pastro-plast.

25 Nos. ₹ 28.00 ₹ 700.00

4Supplying & fixing of 102mm X 178mm size wooden formica board with bakelite cover / PVC board make Prastro-plast

20 Nos. ₹ 44.00 ₹ 880.00

5Supplying & fixing of 152mm X 203mm size wooden formica board with bakelite cover / PVC board make Prastro-plast.

5 Nos. ₹ 58.00 ₹ 290.00

6Supplying & fixing of 203mm X 300mm size wooden formica board with bakelite cover / PVC board make Prastro-plast.

7 Nos. ₹ 90.00 ₹ 630.00

7

Supplying & fixing of 2 + 8 ways metal enclosure for 240/415 Volts MCB (SP/SPN/DP/FP) or isolator, complete with necessary busbar earth-bar, neutral link, dinrail etc. including connection as required (make HPL).

4 Nos. ₹ 760.00 ₹ 3,040.00

8Supplying & fixing of 5/6 Amps piano switch including necessary connection etc. as required

50 Nos. ₹ 22.00 ₹ 1,100.00

9Supplying & fixing of 5/6 Amps piano socket including necessary connection etc. as required.

15 Nos. ₹ 34.00 ₹ 510.00

10Supplying & fixing of 15/16 Amps piano switch including necessary connection etc. as required.

20 Nos. ₹ 66.00 ₹ 1,320.00

11Supplying & fixing of 15/16 Amps piano socket including necessary connection etc. as required.

20 Nos. ₹ 66.00 ₹ 1,320.00

12Supplying & fixing of celling rose including necessary connection etc. as required.

25 Nos. ₹ 22.00 ₹ 550.00

13

Supplying & fixing of 'HALOS' recess mounting LED 2X2 luminaire with acrylic drop light dissipator, make- Bajaj, Cat. No. 111898, BTTI 36W LED NW direct decorative LED luminaire with highly efficient translucent acrylic including connection etc. as required.

15 Nos. ₹ 11,000.00 ₹ 1,65,000.00

14

Supplying & fixing of 'GREEN CENTER' recess mounting direct/indirect LED 2X2 luminaire, make- Bajaj, Cat. No. 111550, BXTBLR36NW white powder coated CRCA housing with LEDs. Curvilinear reflector for uniform flow of light around the central lighting core including connection etc.as required.

5 Nos. ₹ 7,900.00 ₹ 39,500.00

15

Supplying & fixing of surface mounting lumanarie betten for LED tube light, make- Bajaj, cat. No. BJCEB LED Tube (Single), 1X18W LED including connection etc.as required.

10 Nos. ₹ 570.00 ₹ 5,700.00

16Supply & drawing 4 sq.mm. copper conductor wire for loop earthing alongwith other wire as required.

100 Mtr. ₹ 8.00 ₹ 800.00

17

Supplying & fixing of Distribution Board provision for FP MCCB (V-TEC) N3 frame upto 200A in 50 KA as incomer, IP: 43 Protection, Shrouded neutral bar & pan assemble with flexible connecting link, Cement spill protector, Door earthing, 4 way 12 outgoing etc.as required.

1 Nos. ₹ 12,892.00 ₹ 12,892.00


79-Tilla, Agartala.

18

18

Supply & fixing of surface mounting CFL luminaires white powder coated CRCA sheet steel housing with opal acrylic diffuser and decorative end plates. Plastic housing wired with ballast, make-Bajaj, cat. No. 161140, BJC 111, 1X11W 'S' type CFL including necessary connection etc. as required.

6 Nos. ₹ 870.00 ₹ 5,220.00

19

Supplying & laying of 1.1KV grade aluminium conductor armoured cable in existing cable trenches / under switchyard surface & grables in/c. connection etc. as required of following sizes.a) 3.5 core 35 sq.mm. 200 Mtr. ₹ 329.60 ₹ 65,920.00

20Earthing by 2.5 mtr. Long 40mm dia G.I. Pipe with excavation and refilling alternate layer of salt & charcoal etc.

2 Set ₹ 3,033.10 ₹ 6,066.00

21Supplying & fixing of Ding Dong call bell in/c. necessary connection etc. as required.

1 Nos. ₹ 102.00 ₹ 102.00

22

Supply & installation of A.C. split type air condition machine, make- Hitachi-star, 5- star, capacity: 1.8 Ton i/c necessary connection etc. as required.

10 Nos. ₹ 56,490.00 ₹ 5,64,900.00

23Supplying & fixing of 300mm sweep / 900 r.p.m Exhaust fan in the existing hole i/c. necessary connection etc. as required.

3 Nos. ₹ 3,728.00 ₹ 11,184.00

24Supplying & fixing of necessary shutter for 300mm Exhaust fan in the existing hole i/c. necessary painting etc. as required.

3 Nos. ₹ 288.00 ₹ 864.00

25

Small EPABX System within built 4 Port voice mail (No. of extensions: 48, No. of junction: 8, No. of expandable ports: 128, Operators console: 01, Compatible: ISDN.

1 Nos. ₹ 1,55,581.31 ₹ 1,55,581.00

26

Multimedia Projector 55500 with wireless connectivity between PC and Projector, Storage media port and wireless LAN connectivity (Resolution: 1024 X 768 XGA,ANSI Lumen: 4000)

1 Nos. ₹ 55,500.00 ₹ 55,500.00

Sub Total Group B `.11,33,669.00Grand Total Group (A + B) `.76,34,480.00

( Rupees Seventy Six Lacs Thirty-four Thousand Four Hundred and Eighty) Only


79-Tilla, Agartala.

19

PRICE BID

Date…………………..To,The Deputy General ManagerTransmission Circle79-Tilla, Agartala, West Tripura.

Authorized address for communication: -

Telephone nos.: -

Mobile Nos.: -

Fax no.: -

Email ID: -

Name of Work: - Transmission Project (Phase-I); 400 KV Sub-Station at Surjamaninagar (to be charged at 132 KV) and infrastructure development, West Tripura District/ SH:- Infrastructure Development - Construction of Conference Hall at Surjamaninagar Grid Sub-Station.

1. I / WE offer to execute the work(s) described above and remedy any defects therein with conditions of the contract, specifications, drawings, Bill of quantities and Addenda for

a. Item rate Contract (Total Bid Price) Rs………………...........*(NOT APPLICABLE HERE).

b. For percentage Rate Contract,………………………………… (in figures)……………….

…………… …………………………………………………………………………… (in words)

Percent below / above / at par with the rates entered in the schedule of rates, as referred to clause 12 of ITB.

1. I/ WE undertake to commence the work(s) on receiving the notice to precede with work in accordance with the contract documents.

2. This bid and your written acceptance of it shall constitute a binding contract between us. I understand that you are not bound to accept the lowest or any bid you receive.

I/ WE hereby confirm that this bid complies with the Bid validity and earnest money required by the bidding documents and specified in NIT.

Authorized Signature……………………………….

Name and Title of Signatory…………………………

Name of the Bidder……………………………………

Address………………………………………………..


79-Tilla, Agartala.

20

BILL OF QUANTITIES

PREAMBLE

1. The Bill of quantity shall be read in conjunction with the instruction to Bidders, conditions of contract, Specifications and drawings.

2.1. For the construction works, the quantities given in the Schedule of quantities are estimated, and are given to provide a common basis for bidding. The basis of payment will be the actual quantities of the work ordered and carried out, as measured and verified by the Manager (Engineer) and valued

a. At the rates and prices tendered in the Schedule of quantities in the case of item rate tenders; and

b. At percentage rate above or below or at par of the schedule of rates as tendered by the contractor.

2.2 The rates and prices tendered in the priced bill of quantities shall, except in so far as it is otherwise provided under the contract, include all constructional plant, labour, supervision, materials, erection, maintenance, insurance, profit, taxes and duties, together with all general risks, liabilities and obligations, etc. set out in the contract.

3. Discrepancies between rate in figures and words if arises, will govern by the Clause no 14 of NIT & Clause no. 24 of ITB.

4. When percentage rate tenders are invited, the Schedule of quantities will show in the bidding documents the rates used for different items.


79-Tilla, Agartala.

21

BILL OF QUANTITIES FOR PERCENTAGE RATE BIDS

Sl NoDescription

of ItemQuantity Unit

RateAmount

In Figures In words

1. For description of items & schedule of quantities, refer page 5 (five) to page 18(Eighteen) of bidding documents.


79-Tilla, Agartala.

22

-BLANK-

Tripura State Electricity Corporation Limited - tsecl.in · Tripura State Electricity Corporation...

Documents

Transcript of Tripura State Electricity Corporation Limited - tsecl.in · Tripura State Electricity Corporation...