TREME FRACTURE RESISTANCE TREME File Brochure.pdf · PDF file D2 enlarges to the apical...

Click here to load reader

  • date post

    17-Oct-2020
  • Category

    Documents

  • view

    0
  • download

    0

Embed Size (px)

Transcript of TREME FRACTURE RESISTANCE TREME File Brochure.pdf · PDF file D2 enlarges to the apical...

  • DiaDent Group International www.diadent.com | 1.877.342.3368 Follow us on FACEBOOK

    Heat Treated Ni-Ti Rotary File System

    TM

    TREME FRACTURE RESISTANCE TREME FLEXIBILITY

  • Size 19MM 21MM 25MM

    #DX 571-100

    #D1 571-101 571-201

    #D2 571-102 571-202

    #D3 571-103 571-203

    #D4 571-104 571-204

    #D5 571-105 571-205

    #Asst D1/D4 571-191 571-291

    (Pkg. of 4)

    Dia-XTM File •RECOMMENDED SPEED : 250~350 RPM •RECOMMENDED TORQUE : 2~3 NCM

    ORDER INFORMATION

    THE X FACTORS:

    SHAPING FINISHING

    Enhanced Safety • Convex triangular x-section reduces rotational fiction and contact with canal wall • Progressive decreasing % taper design enhances flexibility and safety • Navigate calcified or severely curved canals with confidence and control • Fracture resistance is 143% greater than Dia-PTTM Files • High corrosion resistance with coated surface

    Greater accessibility • Heat treated premium nickel titanium construction offers extreme flexibility • 11 mm length handle offers improved accessibility to teeth • Flat non-cutting file tip efficiently removes debris and soft tissue

    Highly Integrable • Designed to work interchangeably with your current technique and system • Predictable results every time • Perfect shape-matching gutta percha and paper points: Dia-ProTTM

    # 16/.04v

    # 18/.02v

    # 18/.04v

    # 20/.06v

    # 25/.07v

    # 35/.08v

    RATE OF TAPER

    15

  • Before the endo procedure, disinfect inside of the canals using EDTA. Use DX File to shape the coronal section and enlarge the opening of the canal.

    Determine the working length with an X-ray and scout the canal space using K-Files #8 and #10.

    Follow the glide path using K-File #15 and enlarge the opening of the canal.

    D1 expands the glide path and enlarges to widen the coronal section. Irrigate with NaOCI before engaging the file. Shape the middle part of the coronal section using D1 File.

    Continue shaping the middle and apical portions with D1 file using gentle force to brush laterally. Cut the dentin on the outstroke to improve straight-line access and apical progression.

    After providing adequate irrigation, continue shaping the rest of the section (up to the apex) using D1 File.

    D2 enlarges to the apical 2/3. Shape the canal section with a gentle brushing action using D2 File. Confirm working length frequently, especially when shaping severely curved canals.

    Shape down to the apex using D3 File with an in-and-out pecking motion. Finish shaping when it matches the size of K-File #20.

    If the apex is larger than hand file #20, continue shaping with D4 (if #20 hand file is loose at length) and/or D5 (if #25 hand file is loose at length).

    STEP-BY-STEP GUIDE

  • HAND FILES

    OBTURATIONENLARGE CANALACCESS

    DX

    D1

    D2

    D3 Size : F1

    Size : F2

    Size : F3

    Size : F1

    Size : F2

    Size : F3

    D4

    D5 Shaping

    Finishing

    TIPS

    • Inspect files for distortion or wear, such as uneven flutes, dull spots or bending • Lubricate files generously with Dia-PrepTM Pro • Remove the debris from the flutes before continuing • Irrigate and re-irrigate after using each rotary file • Use very light pressure. Never force instruments to working length • Use the files for no more than one or two seconds in the canal • Autoclave files after each use

    Dia-ProT Gutta Percha

    (60/box)

    ML150-S601 F1 (matches D3)

    ML150-S602 F2 (matches D4)

    ML150-S603 F3 (matches D5)

    ML150-S691 Asst (F1/F2/F3)

    Dia-ProT Paper Points

    (100/box)

    MP250-S601 F1

    MP250-S602 F2

    MP250-S603 F3

    MP250-S691 Asst(F1/F2/F3)

    Dia-ProTTM Gutta Percha & Paper Points (Millimeter-Marked)Dia-X DX: Access File (19mm)

    Dia-X D1: ProTaper® S1 Dia-X D2: ProTaper® S2 Dia-X D3: ProTaper® F1 Dia-X D4: ProTaper® F2 Dia-X D5: ProTaper® F3

    *ProTaper® is a registered trademark of Dentsply Tulsa Dental Specialties Inc.

    TM

    Dia-ProT Paper Points

    Dia-ProT Gutta Percha

    Use exactly like ProTaper® Gold

    Dia-ProTTM