Transform our efficiency into yours - Tuboly Astronic AG WHCF 450.pdf · Tuboly-Astronic winding...

4
Swiss quality WHC wire winding machines WHC series for HV-coils with automatic cutting and re-attachment of strip insulation. Short winding times due to highest automation. Transform our efficiency into yours

Transcript of Transform our efficiency into yours - Tuboly Astronic AG WHCF 450.pdf · Tuboly-Astronic winding...

Page 1: Transform our efficiency into yours - Tuboly Astronic AG WHCF 450.pdf · Tuboly-Astronic winding software Our winding software is running on an industrial PC with Windows 7. Due to

Swiss quality

WHC wire winding machinesWHC series for HV-coils with automatic cutting and re-attachment of strip insulation.

Short winding times due to highest automation.

Transform our efficiency into yours

Page 2: Transform our efficiency into yours - Tuboly Astronic AG WHCF 450.pdf · Tuboly-Astronic winding software Our winding software is running on an industrial PC with Windows 7. Due to

Strip insulation technologyStrip insulation allows a conical build-up of the layer insulation. The end filler is automatically filled up with the same insulation strip(s).The insulation strip is wound with constant, dancer controlled tension which guarantees a high filling factor and small radial tolerances. It is possible to program each layer insulation different which is needed for the high voltage impacts.

Tuboly-Astronic winding softwareOur winding software is running on an industrial PC with Windows 7. Due to our flexible and modular winding sys-tem a coil can be easily programmed either on the machine or in our office version on a desk computer. A graphical output of the coil can be shown during production or programming. Based on the entered data for start and end insulation thickness, the winding system is automatically computing the insulation advance for a conical or cylindri-cal layer insulation build up.

Winding without manual intervention. On WHC winding machines high voltage coils

for small distribution transformers can be wound. Simultaneously to the winding of the

conductor, the layer insulation is built up automatically with one insulation strip. The layer

insulation can be built up either conically or cylindrically. The insulation strip is automatically

fed-in and fixed. If needed the insulation strip is automatically separated and re-attached

after the layer is built up. This allows automatic winding from coil start to cooling channel or

lead out without any manual interference by the operator. A PC control system pre-calcu lates

and executes all necessary stop points.

• Constant wire tension due to motor driven and dancer controlled brake rollers

• Constant insulation strip tension due to a motor driven and dancer controlled shaft

• Strip insulation concept with patented cutting and re-attaching system

• Higher filling factor due to an integrated flattening unit for round wir

• Overall material savings due to compact wound coil• Ergonomic design, quick and simple machine set-up• Automatic calculation of stop points for taps,

cooling ducts etc.

Benefits at a glance

WHC wire winding machines

Page 3: Transform our efficiency into yours - Tuboly Astronic AG WHCF 450.pdf · Tuboly-Astronic winding software Our winding software is running on an industrial PC with Windows 7. Due to

Wire guiding unit with dancer-regulated brake systemA dancer system regulates the motor-powered brake rollers and keeps the pre-selected wire tension constant even at oval or rectangular coil shapes. This ensures perfect layer build up at high winding speeds. The required wire tension can be adjusted on the control panel without any mechani-cal intervention.

Automatic insulation strip cutting and reattachment system (patented)The insulation strip moves ahead of the wire to build up the layer insulation and then automatically builds up the required endfi ller at the layer end. If the strip insulation must be cut and reattached no stop is required due to the automatic cutting and reattachment system.

Flattening unit for round wireWith the proven fl attening unit, the round enamel-insu-lated wire can be rolled fl at to an adjustable height.The advantage of fl attening round wire is a higher fi lling factor which results in smaller coil dimensions and reduction of the conductor material, core material and tank volume. This leads to signifi cant savings of transformer manufacturing costs.

• State-of-the-art software, simple program-ming, operator guidance on the touch screen

• Long machine life time• Remote support• Swiss quality

Page 4: Transform our efficiency into yours - Tuboly Astronic AG WHCF 450.pdf · Tuboly-Astronic winding software Our winding software is running on an industrial PC with Windows 7. Due to

WHC 450* WHC 600*

Wire

Round wire diameter (Cu)Round wire diameter (Al)

mm mm

0.5 — 3.4 0.6 — 3.4

0.5 — 3.6 0.6 — 4.0

Number of round wires 1 1

Strip insulation

Number of insulation strips 1 2

Insulation thickness mm 0.045 — 0.12 0.045 — 0.12

Insulation width mm 18 - 40 18 — 40

Full width insulation (option)

Number of insulation mm 1 1

Insulation thickness 0.13 — 0.4 0.13 — 0.4

Insulation width mm 120 — 530 120 — 680

Winder

Rotation speed mm 400 400

Diameter of coil mm 400 500

Length of coil mm 530 680

Weight of coil incl. LV and winding tool

kg 250 350

* Guideline values

Technical data

Available optionsWinding mandrel Pneumatic expansion system for winding mandrelFlattening unit for round wireWinder with manual swiveling counter bearingDecoiler for full width insulation

Tuboly-Astronic AG

Bleicheweg 55805 Dottikon . Schweiz

T +41 56 616 73 73 F +41 56 616 73 74 [email protected]