Traceability Chart
description
Transcript of Traceability Chart
![Page 1: Traceability Chart](https://reader036.fdocuments.us/reader036/viewer/2022080223/55cf9235550346f57b94ada0/html5/thumbnails/1.jpg)
raceability of measuring equipment to the national or the international standard is a key concern in implementing control of inspection, measuring and test equipment required by ISO 9000. For measuring equipment to be traceable to the national standard, they
must be calibrated with equipment which has been verifiedas traceable to the national standard calibrated with equipment having a higher grade of accuracy. Mitutoyo maintains three kinds of standards: Laser for length measurement; End standards (gauge blocks); and Line standards (scales) traceable to the national standard at the Japan Quality Assurance Organization (JQA) and the National Institute of Advanced Industrial Science and Technology (AIST). Mitutoyo’s reference standards include the lodine Saturated Absorption Stabilized He-Ne Laser for length measurement at our Tsukuba Calibration Center, the Laser Interferometer for gauge block calibration at Miyazaki Plant, and the Laser Interferometer for scale calibration at Kiyohara Plant. Mitutoyo also maintains calibration laboratories abroad, offering calibration services for gauge blocks and other measuring equipment. In the US, our calibration facilities have established traceability to NIST; in the UK, Germany, the Netherlands and Brazil calibration services are provided by Mitutoyo facilities acting as calibration agents accredited by NAMAS, DKD, NKO and INMETRO, respectively.
T
AIST: National Institute of Advanced Industrial Science and TechnologyNMIJ: National Metrology Institute of JapanJCSS: Japan Calibration Service SystemNITE: National Institute of Technology and EvaluationIAJapan: International Accreditation JapanSPRING : Standards, Productivity and Innovation Board.SAC: Singapore Accreditation CouncilKIM-LIPI: Indonesia Institute of SciencesNML: National Measurement LaboratoryCNLA: Chinese National Laboratory AccreditationSIRIM: Standards and Industrial Research Institute of MalaysiaDSM: Department of Standards MalaysiaNIST: National Institute of Standards and TechnologyA2LA: American association for Laboratory AccreditationNPL: National Physical LaboratoryUKAS: United Kingdom Accreditation ServiceNMi: Nederlands Meetinstituut RvA: Raad voor AccreditatiePTB: Physikalisch-Technische BundesanstaltDKD: Deutscher KalibrierdienstMETAS: The Swiss Federal Office of Metrology and AccreditationSAS: Swiss Accreditation ServiceIMGC: Istituto di Metrologia "GUSTAVO COLONNETTI"SIT: Servizio di Taratura in ItaliaSP: Swedish National Testing and Research InstituteSWEDAC: Swedish Board for Accreditation and Conformity AssessmentINMETRO: Instituto Nacional de Metrologia Normalizacao e Qualidade IndustrialRBC: Rede Brasileira de Calibracao CENAM: Centro Nacional de MetrologiaEMA: Entidad Mexican de Acreditacion, a.c.INTI: Instituto Nacional de Tecnologia IndustrialOAA: Organismo Argentino de Acreditaci(ILAC): International Laboratory Accreditation Corperation(APLAC): Asia-Pacific Laboratory Accreditation Corperation(EA): European Accreditation Corperation(MRA): Mutual Recognition Agreement
ISO 9000 Certified Mitutoyo
s a quality-conscious manufacturer of precision measuring instruments, Mitutoyo recognizes the importance of establishing and maintaining the qua-
lity system throughout the organization conforming to ISO 9000 requirements. Taking ISO 9002 registration of our Gauge Block manufacturing facility in May 1993, today* Mitutoyo manufacturing facilities are ISO 9000 registered. These facilities include the Linear Scale, Caliper, Dial Indicator, Micrometer, Optical Instruments, Form Measuring Instruments, Coordinate Measuring Machine and Hardness Testing Machine factories. Likewise ISO 9000 registrations were awarded to our Calibration Lab. in the U.S.A., Service center in Japan and operations in Germany and Italy. These efforts are not only restricted to the implementation of our own quality system, but also extended to include assisting our customers in attaining ISO 9000 registration.
A
* as at 1st April, 2005
Mitutoyo Traceability System of Length StandardMitutoyo Traceability System of Length Standard
Nederlands Meetinstituut(NMi)
once/year
once/2years once/3years
once/3years
National Metrology Institute of Japan / National Institute of Advanced Industrial Science and Technology(NMIJ/AIST) 633nm Iodine Stabilized He-Ne Laser National (Primary) Standard
Mitutoyo Tsukuba Calibration Center (JCSS Accredited Cal. Lab. No.0031)633nm Iodine Stabilized He-Ne Laser Secondary Standard
once/3years
once/yearonce/year
once/3yearsonce/3years
Mitutoyo MiyazakiPlant (RvA AccreditedCal. Lab. No. K107633nm Stabilized
He-Ne Laser
Mitutoyo MiyazakiPlant (JCSS Accredited
Cal. Lab. No.0030633nm Stabilized
He-Ne Laser (LaboratoryReference Standard)
Mitutoyo UtsunomiyaCalibration Center (JCSS
Accredited Cal. Lab.No.0078) 633nm Stabilized
He-Ne Laser (LaboratoryReference Standard)
Mitutoyo HiroshimaCalibration Center (JCSS
Accredited Cal. Lab.No.0109) 633nm Stabilized
He-Ne Laser (LaboratoryReference Standard)
Mitutoyo KiyoharaCalibration Center (JCSS
Accredted Cal. Lab.No.0067) 633nm stabilized
He-Ne Laser (LaboratoryReference Standard)
MeasuringInstrument
once/2years
once/1yearor 2years
ThermometerOpticalMeasuring Machine
CoordinateMeasuring Machine
FormMeasuring Machine
VisionMeasuring Machine
MeasuringTool
Scaleunit
PrecisionSensors
WorkingStandard
once/year once/2years
Laser Length Measuring Machine Cera Straight Master Gauge Block Dial Gage Tester Step Gage Standard Scale
Mitutoyo UtsunomiyaCalibration Center
(JCSS Accredited Cal. Lab.No.0078) MicrometerStandard/Step Gage
(laboratory Reference Standard)
Mitutoyo MiyazakiPlant (RvA AccreditedCal. Lab. No.K107)633nm Stabilized
He-Ne Laser
Mitutoyo Hiroshima CalibrationCenter (JCSS Accredited
Cal. Lab. No.0109)Standard Gauge Block/
Micrometer Standard/Step Gage(Laboratory Reference Standard)
Mitutoyo Techno ServiceBusiness Division(RvA Accredited
Cal. Lab. No.K132)Step Gage/Reference Scale
Reading Scale
Mitutoyo MiyazakiPlant (RvA AccreditedCal. Lab. No.K107)
Autocollimator
once/year
Mitutoyo MiyazakiPlant
Gauge Block
Mitutoyo UtsunomiyaCalibration Center
(JCSS Accredited Cal. Lab.No.0078) Standard
Gauge Block(Laboratory Reference Standard)
Traceability of temperature field
NMIJ/AISTTemperaturefixed points
National(Primary)Standard
JEMICTemperaturefixed pointNational
(Sub-Primary)Standard
JCSS AccreditedCal. Lab.
Temperaturefixed pointSecondaryStandard
Mitutoyo TsukubaCalibration Center(JCSS Accredited
Cal. Lab. No.0031)Temperature fixed point(Triple point of water)/
Platinum resistancethermometer
once/2years
once/1 or 2years
Japan
ILACMRA
APLACMRA
EAMRA
Mitutoyo Miyazaki Plant No.0030NMIJ/AIST
Mitutoyo Tsukuba Cal.Center (Length and Temperature) No.0031
Mitutoyo Kiyohara Cal.Center No.0067
Mitutoyo Utsunomiya Cal.Center No.0078
Mitutoyo Hiroshima Cal.Center
Akashi Cal.Center (Force)
Singapore Mitutoyo Asia Pacific No.LA-1996-0102-CSPRINGSAC-SINGLAS
Thailand Mitutoyo Thailand No.LA-1996-0102-C-2SPRINGSAC-SINGLAS
Vietnam Mitutoyo Asia Pacific (HCMC office) No.LA-1996-0102-C-4SPRINGSAC-SINGLAS
Indonesia SPRINGSAC-SINGLAS
Taiwan Mitutoyo Taiwan No.0336NMLCNLA
India Mitutoyo India No.C-0349NPLINABL
Malaysia Mitutoyo Malaysia No.SAMM152SIRIMDSM
USA Mitutoyo America (Elk Grouve) No.0750.01NISTA2LA
Mitutoyo America (Plymouth) No.1472.01
Mitutoyo America Field Service No.1643.01
UK Mitutoyo UK No.0332NPLUKAS
The Netherlands Mitutoyo Netherland No.K 086NMiRvA
Mitutoyo Miyazaki Plant No.K 107
Mitutoyo Kawasaki Cal.Center No.K 125
Mitutoyo Techno Service Business Division No.K132
Germany Mitutoyo Messgerate No.DKD-K-14501PTBDKD
Switzerland Mitutoyo Schweiz No.SCS074METASSAS
Italy Mitutoyo Italiana No.107IMGCSIT
Sweden Mitutoyo Scandinavia No.1794SPSWEDAC
Brazil Mitutoyo Sul Americana (Length) No.031INMETRORBC
Mitutoyo Sul Americana (Force and Hardness) No.207
Mexico Mitutoyo Mexicana (Length) No.D-45CENAM
Canada Mitutoyo Canada No.2003-05NRC-INMS
EMA
CLAS/SCC
Mitutoyo Mexicana (Hardness) No.DZA-10
Argentina Mitutoyo Argentina (Hardness) No.LC 010INTIOAA
IAJapan/NITEJCSS
Accredited calibrationlaboratory
Accreditationbody
National metrologyinstitute
Mitutoyo Indonesia No.LA-1996-0102-C-1
Mitutoyo Thailand (Cholburi branch) No.LA-1996-0102-C-2-1
Mitutoyo Asia Pacific (Hanoi office) No.LA-1996-0102-C-5