GLASS CUTTERSMICRO FINISH STEEL WHEEL – BRONZE AXLESBALL TAPPING HANDLE

Cat. # Color Code Hone Angle Cutting Purpose02 All Green 120˚ General cutting of sheet glass.07 Blue Band 114˚ Opalescent and hard glass.

CARBIDE WHEEL “GOLD TIP” GLASS CUTTERSUNUSUAL LASTING QUALITY (Silver Band)Catalog # CA9

This cutter has the exceptionally high qualityinherent in all Fletcher tools. The CA9 has acarbide wheel for longer lasting and sharper cutting.

RESERVOIR OIL CUTTER FOR PATTERN CUTTINGCatalog # SC-1

REPLACEMENT HEADCatalog # SC-1A or SC-1A-T (Tap Wheel)

REPLACEMENT HEADCatalog # SC-1A or SC-1A-T (Tap Wheel)

REPLACEMENT HEAD FOR PLATE AND THICK GLASSCatalog # SC-3A

This cutter features a refillable oil reservoir in thehandle which releases a small amount of oil to thecutter wheel when handle is depressed. Carbidewheels outlast conventional cutters by far.

RESERVOIR OIL CUTTER FOR PRODUCTION CUTTINGMETAL HANDLECatalog # SC-2

Same as SC-1, but with a large head for productioncutting.

TOYO

TOYO

RESERVOIR OIL CUTTER FOR PRODUCTION CUTTINGPLASTIC HANDLECatalog # SC-3

Same as above, but with a plastic handle.

TOYO

01-16 4-1

REPLACEMENT HEAD Catalog # SC-2A

CUSTOM GRIP SUPERCUTTERCatalog # SC-5C

This cutter features a custom grip and a refillable oilreservoir in the handle. Neon colored handles aresent at random. Color cannot be specified.

TOYOREPLACEMENT HEAD FOR SC-5C SUPERCUTTER ONLYCatalog # SC-5A

RESERVOIR OIL CUTTERCatalog # SC-6C

The oil “HAND” cutter was designed for easy grip.This cutter is excellent for production cutting andalso gives great leverage for pattern cutting. The“HAND” cutter has an extra large oil reservoir andis lightweight. Neon colored handles are sent byrandom, color can not be specified.

TOYO

GRYPHON GLASS CUTTERSCatalog # GDS-C1 BRASSCatalog # GDS-C3 PISTOL GRIP

The unique handle has a “safe-grip” finger notchand a comfortable, well balanced feel. Made inGermany.

DIAMANTOR IMPORTED GLASS CUTTERCatalog # 200

4-2 01-16

CUTTER COZYCatalog # CC1

Foam cushion for super cutters. Just fit over yourhand cutter for a more comfortable grip. Fits SC-1SC-3, and SC-7C.

NEON COLORED OIL CUTTER WITH COMFORT GRIPCatalog # SC-7C

This "Supercutter" has a newly shaped handle to fitcomfortably in your hand. Standard blades arereplaceable and has a neon colored transparenthandle which allows users to check oil levels bysight. Neon colored handles are sent by random,color can not be specified.

TOYO

THOMAS GRIP CUTTERCatalog # SC-8C

This cutter rests between the index and middlefinger to give sure control for precision patterncutting. Body rotates 360° around finger grip. Neoncolored handles are sent by random. Color can notbe specified.

TOYO

GRYPHON has designed a uniquely shaped cutterhead that jets out in front which allows you to bettersee where you are going.

REPLACEMENT HEADCatalog # SC-1A or SC-1A-T (Tap Wheel)

REPLACEMENT HEADCatalog # SC-1A or SC-1A-T (Tap Wheel)

REPLACEMENT HEADCatalog # SC-1A or SC-1A-T (Tap Wheel)

GRYPHON REPLACEMENT HEADCatalog # GDS-CR

Catalog # SCM-701 140˚ small wheel for general purpose glass work.

Catalog # SCM-703 114˚ medium wheel for hard thin glass.

Catalog # SCM-706 140˚ wide head, medium wheel for straight-edge work.

Catalog # FT-720 0 rings ( Pkg. of ten )

REPLACEMENT HEADS FOR FLETCHER SCOREMASTER CUTTERS.

The Scoremaster II System features an oil reservoirand flow valve system that resists leaking, as wellas a contoured comfort handle and universal gripfor push or pull cutting. All three heads arecompletely interchangeable (snap-out) and comewith tungsten carbide wheels. The Scoremaster IIcomes with a 140˚ small wheel size for generalpurpose glass work, and can be set for swivelposition cutting or fixed (locked pin) position cutting.The head, wheel slot and axle are hardened steel toprevent wear and accurately guide the cuttingwheel.

SCOREMASTER II SYSTEM–OIL RESERVOIRCatalog # SCM-2

The Scoremaster I System features a comfortcontoured handle and universal grip that cuts glassin a pull or push stroke. It does not have an oilreservoir. All three heads are completelyinterchangeable (snap-out) with tungsten carbidewheels. The Scoremaster I comes with a 140˚small wheel size for general purpose work, and canbe set for swivel position cutting or fixed (lockedpin) position. The head wheel slot and axle arehardened steel to prevent wear and accuratelyguide the cutting wheel.

SCOREMASTER I SYSTEM–SOLID HANDLECatalog # SCM-1

locked pin swivel position

locked pin swivel position

Designer II glass cutters feature the innovativeFiberlock, anti-leak, fluid dispensing valve systemthat lays down a perfect bead of cutting fluid alongthe score. Available in three styles, all Designer IIglass cutters come with 140 degree long-lifetungsten carbide cutting wheels and the option forfixed or swivel head cutting. Interchangeable wideand narrow heads for straight line or pattern cuttingavailable. The solid brass and plastic contouredhandle pencil grip cutters each include a tappingball for easy break-out of glass.

DESIGNER II CUTTERSCatalog # FT-711 CLEAR PLASTIC PENCIL GRIP Catalog # FT-713 SOLID BRASS PENCIL GRIP Catalog # FT-714 CLEAR PLASTIC PISTOL GRIP

Catalog # FT-03-711 WIDE REPLACEMENT HEAD 140O

Catalog # FT-03-712 NARROW REPLACEMENT HEAD 1400

Catalog # FT-03-713 WIDE REPLACEMENT HEAD 1540 (PLATE GLASS)

01-07 4-3

This simple-to-use tool scores glass, plus marks orcuts strips and circles on plastic sheet, cardboard,poster board, foam core, fabrics, constructionpaper, corrugated kraft board, particle board andmany other materials. Use your existing glasscutter and marking pens or pencils for design work.Use a razor knife for repeat cuts or perfect circles.

COMBINATION STRIPMAKER/CIRCLEMAKERCatalog # 50060

It will cut circles as small as 1/2" diameter and aslarge as 5" diameter. A graduated rod makes it asimple matter to quickly adjust the cutter for anysize circle within the limits of the machine. A turretcontaining three wheels makes wheel changingsimple. When necessary the entire unit can bereplaced in a matter of seconds. The overall size is8" long, 6" wide and 5" high.

This unique circle cutter can cut cirles from3/8”up to 12”. It utilizes the Toyo cutting head, soyou know you will be getting the best scorepossible each time. It is packed with 1- 12” x 12” waffle grid that the apparatus plugsinto. It will also fit into the Morton System gridsurface. Also packed with 8 friction buttons tokeep your glass in place while you cut.

SMALL LENS CUTTERCatalog # 32

CIRCLE-PRO 12Catalog # CSG-CP12

This is a unique combination tool designedspecifically for stained glass. The stripper can cutglass into squares, rectangles and diamonds from1/2" to 12" wide. The circle cutter attachment cancut circles from 3" to 24" in diameter. The “Stripperand Circle Cutter” is great for border pieces andproduction cutting. This combination tool containsthree pieces: T–bar with a 6–wheel cutter turret anda 12" scale, circle cutter base, and a stripper base.The T–bar attaches to either base.

STRIPPER AND CIRCLE CUTTERCatalog # 3016

Catalog # 3T REPLACEMENT 3-WHEEL TURRET

Catalog # SC-1A REPLACEMENT HEAD

Catalog # 3016A REPLACEMENT 6-WHEEL TURRET

CUTTER’S MATE (Shown) This is Cuter’sMate most portable model, Arm length: 16”Longest straight cut: 42.5”.Catalog # CSG-1

CUTTER’S MATE PLUS Very portable withmore cutting area and stability than thesmaller Cutter’s Mate model. Arm Length:21” Longest straight cut: 61.5”Catalog # CSG-2

CUTTER’S MATE COMMERCIAL Cutter’sMate premium model--handles all cuttingneeds, great or small. Arm length 30”Longest straight cut: 94.5”.Catalog # CSG-3

Ideal for taking on the road.Cutter’s mate glides efffortlesslyacross the glass while maintaininga constant 90-degree angle to thesurface. You wil l experiencegreater comfort and ease inscoring glass. The cutting headcan be rotated a full 360 degrees,giving you the ability to cut anyshape you can draw or trace. Youcan even score glass while sittingdown. With Cutter’s Mate, you cancut glass longer with less fatiqueand greater comfort.

4-4 10-08

This circle cutter has a vacuum suction cup to holdcenter positioned. Comes with arm to do 24"maximum circles, circle cutting base and stripcutting base and a 3-wheel turret. Extension armsto cut up to 48" or 72" circles may be purchasedseparately.

Catalog # CM-2A REPLACEMENT 3-WHEEL TURRETCatalog # CM-2B REPLACEMENT CARBIDE WHEELCatalog # CM-2-48 EXTENSION ARM FOR 48" CIRCLESCatalog # CM-2-72 EXTENSION ARM FOR 72" CIRCLESCatalog # FT-02-614 REPLACEMENT 6-WHEEL TURRET

Catalog # FT-05-221 CIRCLE OVAL CUTTER The Fletcher Oval/Circle Glass Cutter will scorecircle from 4-1/4 to 21-1/2 inches wide, ( 108mm to 546mm ). In addition, it will score ovalsup to 3”, ( 75mm ), longer than their width. Thelargest oval is 21-1/2” wide by 24-1/2 inches long,(546mm by 622mm ).

Catalog # FT-03-131 REPLACEMENT HEAD

Catalog # 4112-DRA BREAKER-GROZIER COMBINATION PLIER

A 6" curved jaw plier for breaking and grozing.Comes with rubber coated handle.

IMPORTED PLIERS

01-16 4-5

CIRCLE MATE II CIRCLE AND STRIP CUTTERCatalog # CM-2

9” HEAVY DUTY BREAKERCatalog # 4210-PRO

BREAKING-GROZING PLIERCatalog # FO-5

A 6" curved jaw glass breaking-grozing plier with a3/8" jaw width and plastic covered comfort handles.(Spring loaded.) Exceptionally high quality .

Catalog # 4110-PRO PLASTIC RUNNING PLIER

Light weight ABS plastic running plier. Similar to #189 Fletcher plier. Comes complete with extra setof jaws.

Catalog # 4114-DRA GLASS BREAKING PLIER

A 61/2" breaking plier; the jaws are smooth andhave rubberized handles for comfort.

Catalog # 4121-DRA CUT-RUNNING PLIER, METAL

Catalog # 4121JI-DRA REPLACEMENT TIP COVERS

Adjustable, curved jawed, cut-running pliers forrunning a score. The adjustment feature allows forprecise setting of jaw closure height.

Catalog # 4116-PRO 'FISHLIPS' GROZING PLIER

An efficient new concept in grozing pliers. Able togroze more complex inside curves easier and fasterthan conventional groziers.

A heavy duty 9” drop jaw breaker plier. 7/8” jawwidth. Made in Taiwan for Leponitt.

4-6 08-14

BREAKING/RUNNING PLIERS

01-07 4-7

6" RUNNING PLIERCatalog # 169

Fletcher plastic cut-running pliers are lightweight, ofrugged construction, comfortable, and like all Fletcherproducts, of top professional quality.

8" RUNNING PLIERCatalog # 189

Catalog # 169-JI REPLACEMENT JAW INSERTS

Catalog # 189JI REPLACEMENT JAW INSERTS

RINGSTAR GLASS BREAKING PLIERCatalog # GRS

A unique running plier with a patented pressure systemdesigned specifically for curves. Based on a ring design, awindow allows the user to accurately position the plier overthe score to run in any direction. The long flexible handlesmake it effortless to start a run and easy control itaccurately.

Fletcher plastic cut-running pliers are lightweight, of ruggedconstruction, comfortable, and like all Fletcher products, oftop professional quality.

Catalog # GRS-JI REPLACEMENT JAW INSERTS

Catalog # 4117JI REPLACEMENT CUTTING WHEELS

MOSAIC CUTTERS

GLASS SNAPPERCatalog # GS-1

Easy to hold spring loaded breaking plier, this means nofumbling. For use with glass up to 5⁄32” (4mm).

MOSAIC CUTTERCatalog # 4117-Pro

This quality tool is designed to easily cut glasswithout the use of a traditional glass cutter. Good atquickly cutting small pieces of glass and at removingsmall points from a piece of glass. Made in Taiwanfor Leponitt.

ADJUSTABLE LEAD DIKECatalog # FO-7

A 6" adjustable lead dike with plastic covered comforthandles. The adjustable capability allows for extendedblade life. These excellent cutters are also spring loadedfor ease of use.

LEAD CAME CUTTER 6"Catalog # 4120-CA

This lead dike is spring loaded. Comes with rubbercoated handles.

4-8 01-07

LEAD KNIFECatalog # 4003-PRO

SURE CUT LEAD CAME CUTTERCatalog # LC-2

REPLACEMENT BLADE (1 per pkg)Catalog # LC-2B

BLADE SHARPENER (1 per pkg)Catalog # LC-2C

Single edged lead cutting ool

LC-2

LC-2BLC-2C

LEAD KNIVES

This lead cutter has a small rotating table withsettings for 45 deg. and 90 deg. for easyprecision cuts. Great for production work.

LEAD DIKES

08-14 4-9

“Fan Out” pattern shears are absolutely the finestshears to enter the stained glass market to date. Theyoffer high quality stainless steel blades. The handlesare durable resin contoured to guarantee comfort duringmany hours of pattern cutting.

MIKA COMBINATION PATTERN SHEARSCatalog # 4007-M

This “Two In One” pattern shear featuresinterchangeable super sharp stainless steel lead andfoil blades which are easily exchanged with a simpletwist of the unique locking device.

"FAN OUT" PATTERN SHEARSCatalog # 4007-FO-F For FoilCatalog # 4007-FO-L For Lead

JIM-EZE PATTERN SHEARSCatalog # 4007-JZ For Foil

PATTERN SHEARS

MIKA PATTERN SHEARSCatalog # 4007-MF For FoilCatalog # 4007-ML For Lead

This pattern shear features sharp stainless steelblades with ambidextrous color coded handles.White for Foil, Red for Lead and Green for Mosaic.Patented “over-ride” insures that cuts can be madeto the tip, with ejection of waist from between theblades.

These very unique pattern shears are designed withshorter blades for ease of cutting very intricatedesigns without tearing the patten paper. Due to theunique cut out in the blade they do not clog up whilecutting. They have a soft comfort grip to aid againtfatigue while cutting

4-10 01-07

67 watt Temperature controlled Iron120 V., 1000˚, U.L. ListedCatalog # AH-FX601

The AH-FX601 iron has a reostat on the handlewhich allows you to set the perfect temperature forthe work you are doing and has a maximumtemperasture of 1004°F. The ceramic heatingelement enables it to heat very quickly and maintainan even heat as you work. It is packed with a 3/16”tip and has an optional 1/4” tip available.

HAKKO REPLACEMENT TIPS FOR AH-FX601

Catalog # AH-T19D5 3/16" CHISEL TIPCatalog # AH-T19D65 1/4" CHISEL TIP

This is a large heavy duty iron with the power switchbuilt right into the iron handle. Designed for large,high mass objects.

150 WATT 120V., 800˚, U.L. ListedCatalog # AH-150

HAKKO REPLACEMENT TIPS FOR AH-150

Catalog # AH-CA127 1/2" Diameter Pointed Tip

60 WATT SOLDERING IRON120 V.Catalog # AH-60

The “Red” was specially designed for the new hobbyist.It is 91/2” long and extremely lightweight. Features aplastic handle that remains cool while working. The ironincludes a 3/16” chisel tip that is able to maintainexcellent heat. This 60 watt iron is ideal for kits. Use with stand AH-602.

HAKKO REPLACEMENT PARTS FOR AH-60

Catalog # AH-60A 3/16" REPLACEMENT TIP

AMERICAN HAKKO SOLDERING IRONS

This is a large heavy duty iron with the power switchbuilt right into the iron handle. Designed for large,high mass objects.

200 WATT 120V., 800˚, U.L. ListedCatalog # AH-200

HAKKO REPLACEMENT TIPS FOR AH-456

Catalog # AH-1026 3/16" CHISEL TIPCatalog # AH-1179 3/8" CHISEL TIP

HAKKO REPLACEMENT TIPS FOR AH-200

Catalog # AH-CA16 5/8" Diameter Pointed Tip

01-07 4-11

HAKKO REPLACEMENT TIPS FOR AH-918

Catalog # AH-918-1 1/16" MINI CHISELCatalog # AH-918-2 3/32" STANDARD CHISELCatalog # AH-918-3 1/8" LARGE CHISELCatalog # AH-918-6 1/4" LARGE CHISELCatalog # AH-918-B CONICAL

Catalog # AH-493 SMOKE ABSORBER This smoke absorber is designed to removenoxious gasses, safely, quickly and efficientlywith a low noise high performance fan. The filteris made by joining specific urethane foam withrefined activated carbon having a highabsorbing performance.

Catalog # AH-A1001 SMOKE ABSORBER FILTERS 5-PACK

HAKKO STUDENT IRON STANDCatalog # AH-603

This stand is specifically designed for the studentseries irons, AH-80, & AH-100. The base is made ofdiecast metal with a stainless steel holding piece,sponge is included.

Catalog # AH-1023 SMOKE ABSORBER EXTENSION ARM The extension arm for the smoke absorber allowsyou to position the smoke absorber for maximumsmoke absorption It is made of high grade durablesteel has a clamp capable of clamping to almostany surface. AH-493 not included.

TIP CLEANER REPLACEMENT WIRE for #AH-633 and #AH-599Catalog # AH-599RS

TIP COVERFor use with AH-456 and AH-918 irons.Catalog # AH-605

HAKKO SOLDERING IRON STANDWITH TIP CLEANERCatalog # AH-633

HAKKO SOLDERING IRON STANDCatalog # AH-602

REPLACEMENT SPONGECatalog # AH-602RS

Hakko's soldering iron stand is made of metal with ahigh-temperature plastic holding sleeve. This standcomes with The AH-599 tip cleaner. For use withAH-456.

Hakko's soldering iron tip cleaner tray has a brasswire which cleans tip better than standard spongetrays.

TIP CLEANER TRAYCatalog # AH-599

4-12 01-07

The Iron holder 602 is designed so that theiron can be quickly, easily and safely setdown. The stand is simple to assemble and disassemble for storage.

The Hakko 599 tip cleaner uses finemetal coils to clean the tip. The 599removes oxides and other contaminantswithout damaging the long life tip plating.

AMERICAN HAKKO ACCESSORIES

80 WATT (LIGHTED) SOLDERING IRON120 V., U.L. ListedCatalog # SPG-80L

The Weller SPG-80L is specifically designed forstained glass work. This medium duty 80-wattsoldering iron has been introduced by Weller for thegrowing stained glass art and craft market. Itcomes complete with the new, long-life iron platedtips and a soldering iron stand. The new SPG80with 1/4" and 3/8" chisel-shaped tips develops 950˚F. tip temperature for precision soldering of the mostintricate work. It measures 9 1/4", weighs 7 ozs,and features a heat and impact resistant handle.For best results use #PH100 stand.

WELLER REPLACEMENT TIPS FOR SPG-80L & WLC200

Catalog # MTG-20 3/8 CHISEL TIPCatalog # MTG-21 1/4 CHISEL TIPCatalog # MTG-22 GROOVED BEADING TIP

PLATO REPLACEMENT TIPS FOR SPG-80L & WLC200

Catalog # 64-1059 1/4 CHISEL TIPCatalog # 66-1290 3/8 CHISEL TIP

100 WATT CONTROLLED OUTPUT SOLDERING IRON120V. 50/60 Hz., 700˚ , U.L. ListedCatalog # W-100

81/2" long. Weight 8oz. Comes with 3/8" 700˚ F.Chisel tip. A high quality tool with all the benefits ofcontrolled output and temperature. Temperatureselection by merely changing tips. Use with#PH100 stand.

80 WATT SOLDERING IRON120 V., U.L. ListedCatalog # WLC200

The Weller® WLC200 120 volt soldering stationoffers adjustable tip temperature by varying theheater wattage. By turning the knob on the powerbase the wattage can be varied from a minimum of5 watts to a maximum of 80 watts. The WLC200comes with a built in iron stand, a tip cleaningsponge, a flat blade set screw, an Allen set screw,and is supplied with a MTG-20 3⁄8” chisel tip.

10-08 4-13

WELLER IRONS

WELLER REPLACEMENT TIPS FOR W-100

Catalog # CT6C7 1/8" CHISEL TIP 700°Catalog # CT6D7 3/16" CHISEL TIP 700°Catalog # CT6E7 1/4" CHISEL TIP 700°Catalog # CT6F7 3/8" CHISEL TIP 700° (standard)Catalog # CT6G7 BEADING TIP 700°Catalog # CT6D8 3/16" CHISEL TIP 800°Catalog # CT6F8 3/8" CHISEL TIP 800°

WELLER REPLACEMENT PARTS FOR W-100

Catalog # HEW100P HEATING ELEMENTCatalog # KN100A KNURLED RING NUTCatalog # SW100 SWITCH

PLATO REPLACEMENT TIPS FOR W-100

Catalog # 6C-3219-7 1/8" CHISEL TIP 700°Catalog # 6C-1083-8 3/8" CHISEL TIP 800°Catalog # 6C-1083-7 3/8" CHISEL TIP 700°Catalog # 6C-0362-7 BEADING TIP 700°

WELLER SOLID STATE SOLDERING GUN120 V., 150 Watt, 700˚ , U.L. ListedCatalog # GT-7A

Fast heat, small tip useful for copper foil work, tacksoldering, etc. Has quick–release interchangeablepowerhead 3/16" chisel tip.

Catalog # 7A REPLACEMENT HEAD FOR GT-7A

WELLER KITSAre easy and comfortable to use due to balanced design, lightweight construction and maximum heat protection.

Are economical and durable due to the replaceable modular design.

Have rapid heat recovery for continuous operation.

Are safe to use. U.L. Listed.

BASIC SOLDERING KITCatalog # 1140A

1140A includes the 7760 red handle and the 4033S1000˚ F interchangeable heater with integral ironclad, silver plated, long taper chisel shaped tip.

CUSTOM SOLDERING KITCatalog # 1175

1175 includes the 7760 red handle, the 37 1100˚ Finterchangeable heater and PL–133 replaceableiron clad, silver plated, long taper chisel shaped tip.

120 WATT HEAVY DUTY SOLDERING IRON120 V., 950˚, U.L. ListedCatalog # SP-120

Heavy Duty iron for greater output. It is 11 3/8" long.Weights 10 oz. 1/2" diameter tip.

Catalog # MTG-30 WELLER REPLACEMENT TIP FOR SP-120

4-14 01-07

WELLER IRONS

WELLER SOLID STATE SMOKE ABSORBERCatalog # WSA350

This smoke absorber isdesigned to remove noxiousgasses, safely, quickly andefficiently with a low noisehigh performance fan. Thefi l ter is made by joiningspecific urethane foam withrefined activated carbonhaving a high absorbingperformance.

Catalog # WSA350R FILTERS 5-PACK

Turquoise colored convection-cooled molded grip.Stainless steel heat reflector. Flexible 2-wire cord.Provides complete interchangeability of all standardline heaters and integral heater/tips. Grip diameter1", handle length 5". For best results use the #8800Iron Holder.

HANDLE & CORDCatalog # 7770

45 WATT MODULAR HEATERCatalog # 4033S

Constructed of rugged corrosion resistant stainlesssteel, featuring high strength resistance andproviding positive heat transfer to the tip. Wedgeshaped base guide permits firm taper-fit assemblyto the handle.

45 WATT MODULAR THREADED HEATERCatalog # 4037S

The same performance as the 4033S, but allowsyou to use interchangeable thread-on tips. (No tipincluded).

WELLER MODULAR PARTS

50 WATT HIGH-PERFORMANCE HEATERCatalog # 33

1100˚ F heater with integral ironclad, silver-plated,long taper chisel tip.

50 WATT HIGH-PERFORMANCE THREADED HEATERCatalog # 37

The same high performance as the # 33, but allowsyou to use interchangeable thread-on tips. (No tipincluded).

01-07 4-15

3/8" chisel tip for use on either the 4037S or 37heaters.

Catalog # PL-113 THREAD-ON TIP

1/8" taper chisel tip for use on either the 4037S or37 heaters.

Catalog # PL-151 THREAD-ON TIP

3/16" chisel tip for use on either the 4037S or 37heaters.

Catalog # PL-153 THREAD-ON TIP 3/16" chisel tip for use on either the 4037S or 37heaters.

Catalog # PL-133 THREAD-ON TIP

Catalog # PL-350 THREAD-ON TIP

1/8" standard chisel tip for use on either the 4037Sor 37 heaters.

4-16 01-16

Tray fastens securely to workbench. Includesspecially processed sponge for t ip cleaning.Removes oxidation. Helps to prevent contamination.

Catalog # T-100 KLEEN-TIP SPONGE & TRAY

Catalog # T-100RS REPLACEMENT SPONGE

SOLDERING ACCESSORIESCatalog # PH100 SOLDERING IRON STAND

Catalog # 4129-SP SOLDERING IRON STAND Similar to stand above. Imported for use withSPG-80L and W-100.

Specifically designed to extend life of Wellercontrolled output tools. PH stands have heavy non-sliding cast bases with sponge receptacle andconveniently positioned non-sinking spring standand funnel. Soldering Tool Stand, with sponge. ForW100 and SPG-80L irons.

This handy holder attaches easily to any work areafor operator safety, convenience and to preventdamage to the soldering irons. Designed for Ungarmodular soldering irons.

Catalog # 8000 SOLDERING IRON HOLDER

Catalog # RS1 REPLACEMENT SPONGE

Catalog # 4129A REPLACEMENT SPONGE

Featuring a one full year warranty, “ON” indicatorlight and a rating of 15 amps or 1800 watts. Usesno fuses, Useful for controlling the temperature ofan iron to suit various soldering conditions. Nowwith grounded plugs.

Catalog # GSC-1 SOLDERING IRON CONTROL

08-14 4-17

4-18 08-14