Toolholder Program - WTO-Tools · Lynx 300 M, Puma GT2100, 2600 M Puma 2100,2600(II) M/MS/Y/SY...
64
Tool H older Program Lynx 220 M/LM Lynx 220 LMS/LY/LSY, Lynx 2100 M/MS/LY/LSY Lynx 300 M, 2600 Y, Puma GT2100, 2600 M Lynx 2600 SY (12ST) Puma 2100, 2600 (II) M/MS/Y/SY (BMT55) Puma 2100, 2600 (II) M/MS/Y/SY (BMT65) Puma 2100, 2600 Y/SY, Lynx 2600 Y/SY (16ST, BMT55) Puma 3100 M/Y, GT3100 M Puma 4100, 5100 M/LM/LY Puma 600, 700, 800 M/LM/LY Puma MX1600 ST (BMT45) Puma MX1600, 2100 ST (BMT55) Puma SMX2600, 3100 ST Puma TT1300 SY/SYY Puma TT1500, 1800, 2100 MS/SY/SYY Puma TT2000, 2500 MS/SY
Transcript of Toolholder Program - WTO-Tools · Lynx 300 M, Puma GT2100, 2600 M Puma 2100,2600(II) M/MS/Y/SY...
-
Tool Holder ProgramLynx 220 M/LMLynx 220 LMS/LY/LSY, Lynx 2100 M/MS/LY/LSYLynx 300 M, 2600 Y, Puma GT2100, 2600 MLynx 2600 SY (12ST)Puma 2100, 2600 (II) M/MS/Y/SY (BMT55)Puma 2100, 2600 (II) M/MS/Y/SY (BMT65)Puma 2100, 2600 Y/SY, Lynx 2600 Y/SY (16ST, BMT55) Puma 3100 M/Y, GT3100 MPuma 4100, 5100 M/LM/LYPuma 600, 700, 800 M/LM/LYPuma MX1600 ST (BMT45)Puma MX1600, 2100 ST (BMT55)Puma SMX2600, 3100 STPuma TT1300 SY/SYYPuma TT1500, 1800, 2100 MS/SY/SYYPuma TT2000, 2500 MS/SY
-
QuickFlex®The new quick change system for high performance and precision.
Minimal investment, maximal expandability.
Designed for
BMT Turrets
© WTO GmbH * Subject to change without notice * www.wto.de2
-
4 - 6PageLynx 220 M/LM
7 - 10PageLynx 220 LMS/LY/LSY, Lynx 2100 M/MS/LY/LSY
11 - 13PageLynx 300 M,2600 Y, Puma GT2100,2600 M
14 - 17PageLynx 2600 SY (12ST)
18 - 23PagePuma 2100,2600(II) M/MS/Y/SY (BMT55)
24 - 27PagePuma 2100,2600(II) M/MS/Y/SY (BMT65)
28 - 30PagePuma 2100,2600 Y/SY, Lynx 2600 Y/SY (16ST, BMT55)
31 - 33PagePuma 3100 M/Y, GT3100 M
34 - 35PagePuma 4100, 5100 M/LM/LY
36 - 37PagePuma 600, 700, 800 M/LM/LY
38 - 41PagePuma MX1600 ST (BMT45)
42 - 44PagePuma MX1600, 2100 ST (BMT55)
45 - 48PagePuma SMX2600, 3100 ST
49 - 51PagePuma TT1300 SY/SYY
52 - 54PagePuma TT1500, 1800, 2100 MS/SY/SYY
55 - 58PagePuma TT2000, 2500 MS/SY
59 - 60PageReduction sleeves
61 - 63PageCollets
EC = External coolant supplyHP-IC = High pressure internal coolant supply through cutting toolIC 80 bar = Internal and external coolant supplyMax. coolant pressure = 80 barIC 30 bar = Internal and external coolant supplyMax. coolant pressure = 30 barOnly use filtered coolant fluid (max. particle size = 50 µm)Do not run without coolantDo not use for machining abrasive materials such as cast iron, etc.
3© WTO GmbH * Subject to change without notice * www.wto.de
Contents
-
Static Toolholders - Standard Program
OD cutting holder48-950832048-950843/4"
OD cutting holder, HP-ICIC 80 bar48-100605-HP20IC 80 bar48-104395-HP25IC 80 bar48-108926-HP3/4"IC 80 bar48-104396-HP1"
Face cutting holder48-10914820
Face cutting holder48-953383/4"
Face cutting holder, HP-ICIC 80 bar48-109148-HP20IC 80 bar48-104397-HP25IC 80 bar48-109149-HP3/4"IC 80 bar48-104398-HP1"
Combination toolholder, LF=65IC 80 bar48-95090Ø 40IC 80 bar48-95327Ø 1 1/2"
Static Toolholders - Enhanced Program
OD cutting holder, double, 24 station48-9508720
Cut-off holder, adjustable48-94968SH 26
Cut-off holder, adjustable, HP-ICIC 80 bar48-102252RSH 26IC 80 bar48-102252LSH 26
Boring bar holder, double, 24 station48-95091Ø 25
© WTO GmbH * Subject to change without notice * www.wto.de4
Doosan Lynx 220 M/LM
-
Driven Toolholders - QuickFlex®
Straight drill/milling unitEC1:1420125015-45ER-25 QF
0067725000
IC 80 bar1:1420125016-45ER-25 QF0067725000
Straight drill/milling unit (12000 RPM)EC1:1420125019-45ER-25 QF
0067725000
IC 80 bar1:1420125020-45ER-25 QF0067725000
Right angle drill/milling unitEC1:1420525015-45ER-25 QF
0067725000
IC 80 bar1:1420525016-45ER-25 QF0067725000
Right angle drill/milling unit (12000 RPM)EC1:1420525038-45ER-25 QF
0067725000
IC 80 bar1:1420525039-45ER-25 QF0067725000
Driven Toolholders - Enhanced Program
Straight offset drill/milling unitEC1:3410410008-45ER 16
00675000937
IC 80 bar1:3410410002-45ER 1600675000937
Right angle drill/milling unitEC1:2420520018-45ER-20 QF
0067720001
IC 80 bar1:2420520019-45ER-20 QF0067720001
EC2:1420525020-45ER-25 QF0067725000
IC 80 bar2:1420525021-45ER-25 QF0067725000
Adjustable angle drill/milling unitEC1:1411010002-45ER 16
00675000902
IC 80 bar1:1411010003-45ER 1600675000902
EC1:2411007004-45ER 1100675000914
IC 80 bar1:2411007005-45ER 1100675000914
5© WTO GmbH * Subject to change without notice * www.wto.de
Doosan Lynx 220 M/LM
-
Driven Toolholders - Enhanced Program
Gear hobbing unitEC1:1410900001-45Type 15-2
00675001015
160008152 Ø 8
160010152 Ø 10
160013152 Ø 13
160016152 Ø 16
160022152 Ø 22
160015152 Ø 5/8"
160019152 Ø 3/4"
110587
Broaching unit for ID and ODEC1:1414532000-45TN765050
© WTO GmbH * Subject to change without notice * www.wto.de6
Doosan Lynx 220 M/LM
-
Static Toolholders - Standard Program
OD cutting holder48-950832048-950843/4"
OD cutting holder, HP-ICIC 80 bar48-100605-HP20IC 80 bar48-104395-HP25IC 80 bar48-108926-HP3/4"IC 80 bar48-104396-HP1"
OD cutting holder, both sides48-950852048-950863/4"
OD cutting holder, both sides, HP-ICIC 80 bar48-95085-HP20IC 80 bar48-95086-HP3/4"
Face cutting holder48-10914820
Face cutting holder48-953383/4"
Face cutting holder, HP-ICIC 80 bar48-109148-HP20IC 80 bar48-104397-HP25IC 80 bar48-109149-HP3/4"IC 80 bar48-104398-HP1"
Combination toolholder, LF=65IC 80 bar48-95090Ø 40IC 80 bar48-95327Ø 1 1/2"
Static Toolholders - Standard Program
Combination toolholder, universal, LF=85IC 80 bar48-95998Ø 32
241132016 ER25
241132020 ER32
IC 80 bar48-96029Ø 1 1/4"2411125020 ER32
Boring bar holder universal, double48-95093Ø 2548-95325Ø 1"
7© WTO GmbH * Subject to change without notice * www.wto.de
Doosan Lynx 220 LMS/LY/LSY, Lynx 2100 M/MS/LY/LSY
-
Static Toolholders - Enhanced Program
OD cutting holder, double, 24 station48-9508820
OD cutting holder, both sides, double, 24station
48-9535520
OD cutting holder, both sides, double, Y axis48-11081120 (3/4")
Cut-off holder, adjustable48-94968SH 26
Cut-off holder, adjustable, HP-ICIC 80 bar48-102252RSH 26IC 80 bar48-102252LSH 26
Boring bar holder, universal, double, 24station
48-95092Ø 25
© WTO GmbH * Subject to change without notice * www.wto.de8
Doosan Lynx 220 LMS/LY/LSY, Lynx 2100 M/MS/LY/LSY
-
Driven Toolholders - QuickFlex®
Straight drill/milling unitEC1:1420125015-45ER-25 QF
0067725000
IC 80 bar1:1420125016-45ER-25 QF0067725000
Straight drill/milling unit (12000 RPM)EC1:1420125019-45ER-25 QF
0067725000
IC 80 bar1:1420125020-45ER-25 QF0067725000
Right angle drill/milling unitEC1:1420525015-45ER-25 QF
0067725000
IC 80 bar1:1420525016-45ER-25 QF0067725000
Right angle drill/milling unit (12000 RPM)EC1:1420525038-45ER-25 QF
0067725000
IC 80 bar1:1420525039-45ER-25 QF0067725000
Right angle back set drill/milling unit, LF=85EC1:1420525024-45ER-25 QF
0067725000
IC 80 bar1:1420525025-45ER-25 QF0067725000
Right angle back set drill/milling unit, LF=85,(12000 RPM)
EC1:1420525049-45ER-25 QF0067725000
IC 80 bar1:1420525050-45ER-25 QF0067725000
Driven Toolholders - QuickFlex®
Right angle drill/milling unit, both sides,LF=85
EC1:1420525043-45ER-25 QF0067725000
Right angle drill/milling unit, both sides,LF=85, (12000 RPM)
EC1:1420525051-45ER-25 QF0067725000
9© WTO GmbH * Subject to change without notice * www.wto.de
Doosan Lynx 220 LMS/LY/LSY, Lynx 2100 M/MS/LY/LSY
-
Driven Toolholders - Enhanced Program
Straight offset drill/milling unitEC1:3410410008-45ER 16
00675000937
IC 80 bar1:3410410002-45ER 1600675000937
Right angle drill/milling unitEC1:2420520018-45ER-20 QF
0067720001
IC 80 bar1:2420520019-45ER-20 QF0067720001
EC2:1420525020-45ER-25 QF0067725000
IC 80 bar2:1420525021-45ER-25 QF0067725000
Adjustable angle drill/milling unitEC1:1411010002-45ER 16
00675000902
IC 80 bar1:1411010003-45ER 1600675000902
EC1:2411007004-45ER 1100675000914
IC 80 bar1:2411007005-45ER 1100675000914
Driven Toolholders - Enhanced Program
Gear hobbing unitEC1:1410900001-45Type 15-2
00675001015
160008152 Ø 8
160010152 Ø 10
160013152 Ø 13
160016152 Ø 16
160022152 Ø 22
160015152 Ø 5/8"
160019152 Ø 3/4"
110587
Straight drill/milling unit, double, Y axisEC1:1413002006-45ER 20
00675000947
IC 80 bar1:1413002008-45ER 2000675000947
Broaching unit for ID and ODEC1:1414532000-45TN765050
© WTO GmbH * Subject to change without notice * www.wto.de10
Doosan Lynx 220 LMS/LY/LSY, Lynx 2100 M/MS/LY/LSY
-
Static Toolholders - Standard Program
OD cutting holder48-870972548-870981"
OD cutting holder, HP-ICIC 80 bar48-87097-HP25IC 80 bar48-87098-HP1"
Face cutting holder48-871012548-871021"
Face cutting holder, HP-ICIC 80 bar48-87101-HP25IC 80 bar48-87102-HP1"
Combination toolholder, LF=70IC 80 bar48-106897Ø 32IC 80 bar48-87103Ø 40IC 80 bar48-106872Ø 1 1/4"IC 80 bar48-87104Ø 1 1/2"
Cover plate48-87111
Static Toolholders - Enhanced Program
OD cutting holder, double, Y axis48-8714025(1")
Cut-off holder, adjustable48-103287SH 32
Cut-off holder, adjustable, HP-ICIC 80 bar48-110160RSH 32IC 80 bar48-110160LSH 32
Boring bar holder, both sides, double, Y axis,short
48-98353Ø 25
11© WTO GmbH * Subject to change without notice * www.wto.de
Doosan Lynx 300 M,2600 Y, Puma GT2100,2600 M
-
Driven Toolholders - QuickFlex®
Straight drill/milling unitEC1:1420125015-55ER-25 QF
0067725000
IC 80 bar1:1420125016-55ER-25 QF0067725000
Right angle drill/milling unit, LF=70EC1:1420525015-55ER-25 QF
0067725000
IC 80 bar1:1420525016-55ER-25 QF0067725000
Driven Toolholders - Enhanced Program
Straight drill/milling unitEC1:1410120010-55ER 32
0067725000
IC 80 bar1:1410120011-55ER 320067725000
Straight milling unit with combination millarbor DIN 6358
EC1:1410222004-55Ø 2200675000483
EC1:1410219002-55Ø 3/4"00675000483
Straight offset drill/milling unitEC1:1410116029-55ER 25
00675000932
IC 80 bar1:1410116030-55ER 2500675000932
EC1:2410113009-55ER 2000675000939
IC 80 bar1:2410113010-55ER 2000675000939
EC1:3410410004-55ER 1600675000937
IC 80 bar1:3410410005-55ER 1600675000937
© WTO GmbH * Subject to change without notice * www.wto.de12
Doosan Lynx 300 M,2600 Y, Puma GT2100,2600 M
-
Driven Toolholders - Enhanced Program
Right angle drill/milling unit, LF=70EC1:1410520033-55ER 32
0067725000
IC 80 bar1:1410520034-55ER 320067725000
EC1:2420520012-55ER-20 QF0067720001
IC 80 bar1:2420520013-55ER-20 QF0067720001
EC1:3410810016-55ER 1600675000841
IC 80 bar1:3410810017-55ER 1600675000841
EC2:1420525030-55ER-25 QF0067725000
IC 80 bar2:1420525031-55ER-25 QF0067725000
Right anglemilling unit with combinationmillarbor DIN 6358, LF=70
EC1:1410622010-55Ø 2200675000483
EC1:1410619005-55Ø 3/4"00675000483
Adjustable angle drill/milling unitEC1:1411010005-55ER 16
00675000902
IC 80 bar1:1411010006-55ER 1600675000902
EC1:2411007007-55ER 1100675000914
IC 80 bar1:2411007008-55ER 1100675000914
Driven Toolholders - Enhanced Program
Gear hobbing unitEC1:1410900002-55Type 15-2
00675001015
160008152 Ø 8
160010152 Ø 10
160013152 Ø 13
160016152 Ø 16
160022152 Ø 22
160015152 Ø 5/8"
160019152 Ø 3/4"
110587
Broaching unit for ID and ODEC1:1414532001-55TN765050
13© WTO GmbH * Subject to change without notice * www.wto.de
Doosan Lynx 300 M,2600 Y, Puma GT2100,2600 M
-
Static Toolholders - Standard Program
OD cutting holder48-870972548-870981"
OD cutting holder, HP-ICIC 80 bar48-87097-HP25IC 80 bar48-87098-HP1"
OD cutting holder, both sides48-870992548-871001"
OD cutting holder, both sides, HP-ICIC 80 bar48-87099-HP25IC 80 bar48-87100-HP1"
Face cutting holder48-871012548-871021"
Face cutting holder, HP-ICIC 80 bar48-87101-HP25IC 80 bar48-87102-HP1"
Combination toolholder, LF=70IC 80 bar48-106897Ø 32IC 80 bar48-87103Ø 40IC 80 bar48-106872Ø 1 1/4"IC 80 bar48-87104Ø 1 1/2"
Boring bar holder, double48-87149Ø 3248-87150Ø 1 1/4"
Cover plate48-87111
Static Toolholders - Enhanced Program
OD cutting holder, double, Y axis48-8714025(1")
OD cutting holder, both sides, double, Y axis48-8714125(1")
Cut-off holder, adjustable48-103287SH 32
Cut-off holder, adjustable, HP-ICIC 80 bar48-110160RSH 32IC 80 bar48-110160LSH 32
Boring bar holder, both sides, double, Y axis48-87147Ø 2548-87148Ø 1"
© WTO GmbH * Subject to change without notice * www.wto.de14
Doosan Lynx 2600 SY (12ST)
-
Driven Toolholders - QuickFlex®
Straight drill/milling unitEC1:1420125015-55ER-25 QF
0067725000
IC 80 bar1:1420125016-55ER-25 QF0067725000
Right angle drill/milling unit, LF=70EC1:1420525015-55ER-25 QF
0067725000
IC 80 bar1:1420525016-55ER-25 QF0067725000
Right angle drill/milling unit, LF=85EC1:1420525018-55ER-25 QF
0067725000
IC 80 bar1:1420525019-55ER-25 QF0067725000
Right angle drill/milling unit, both sides,LF=85
EC1:1420525020-55ER-25 QF0067725000
Driven Toolholders - Enhanced Program
Straight drill/milling unitEC1:1410120010-55ER 32
0067725000
IC 80 bar1:1410120011-55ER 320067725000
Straight milling unit with combination millarbor DIN 6358
EC1:1410222004-55Ø 2200675000483
EC1:1410219002-55Ø 3/4"00675000483
Straight offset drill/milling unitEC1:1410116029-55ER 25
00675000932
IC 80 bar1:1410116030-55ER 2500675000932
EC1:2410113009-55ER 2000675000939
IC 80 bar1:2410113010-55ER 2000675000939
EC1:3410410004-55ER 1600675000937
IC 80 bar1:3410410005-55ER 1600675000937
15© WTO GmbH * Subject to change without notice * www.wto.de
Doosan Lynx 2600 SY (12ST)
-
Driven Toolholders - Enhanced Program
Right angle drill/milling unit, LF=70EC1:1410520033-55ER 32
0067725000
IC 80 bar1:1410520034-55ER 320067725000
EC1:2420520012-55ER-20 QF0067720001
IC 80 bar1:2420520013-55ER-20 QF0067720001
EC1:3410810016-55ER 1600675000841
IC 80 bar1:3410810017-55ER 1600675000841
EC2:1420525030-55ER-25 QF0067725000
IC 80 bar2:1420525031-55ER-25 QF0067725000
Right angle drill/milling unit, LF=85EC1:1410520030-55ER 32
0067725000
IC 80 bar1:1410520031-55ER 320067725000
EC1:2420520014-55ER-20 QF0067720001
IC 80 bar1:2420520015-55ER-20 QF0067720001
EC1:3410810020-55ER 1600675000841
IC 80 bar1:3410810021-55ER 1600675000841
EC2:1420525032-55ER-25 QF0067725000
IC 80 bar2:1420525033-55ER-25 QF0067725000
Driven Toolholders - Enhanced Program
Right anglemilling unit with combinationmillarbor DIN 6358, LF=70
EC1:1410622010-55Ø 2200675000483
EC1:1410619005-55Ø 3/4"00675000483
Right anglemilling unit with combinationmillarbor DIN 6358, LF=85
EC1:1410622011-55Ø 2200675000483
EC1:1410619006-55Ø 3/4"00675000483
Adjustable angle drill/milling unitEC1:1411010005-55ER 16
00675000902
IC 80 bar1:1411010006-55ER 1600675000902
EC1:2411007007-55ER 1100675000914
IC 80 bar1:2411007008-55ER 1100675000914
© WTO GmbH * Subject to change without notice * www.wto.de16
Doosan Lynx 2600 SY (12ST)
-
Driven Toolholders - Enhanced Program
Gear hobbing unitEC1:1411500002-55Type 16-1EC2:1411500001-55Type 16-1
00675000927
160016161 Ø 16
160022161 Ø 22
160027161 Ø 27
160015161 Ø 5/8"
160019161 Ø 3/4"
160025161 Ø 1"
160031161 Ø 1 1/4"
110587
Straight drill/milling unit, double, Y axisEC1:1413002004-55ER 25
00675000970
IC 80 bar1:1413002003-55ER 2500675000970
2-spindle - Right angle drill/milling unit, Yaxis
EC1:1413502007-55ER 2500675000915
IC 80 bar1:1413502008-55ER 2500675000915
2-spindle - Right angle drill/milling unit, bothsides, Y axis
EC1:1413502006-55ER 2500675000915
Broaching unit for ID and ODEC1:1414532000-55TN765050
17© WTO GmbH * Subject to change without notice * www.wto.de
Doosan Lynx 2600 SY (12ST)
-
Static Toolholders - Standard Program (12ST)
OD cutting holder48-870972548-870981"
OD cutting holder, HP-ICIC 80 bar48-87097-HP25IC 80 bar48-87098-HP1"
OD cutting holder, both sides48-870992548-871001"
OD cutting holder, both sides, HP-ICIC 80 bar48-87099-HP25IC 80 bar48-87100-HP1"
Face cutting holder48-871012548-871021"
Face cutting holder, HP-ICIC 80 bar48-87101-HP25IC 80 bar48-87102-HP1"
Combination toolholder, LF=70IC 80 bar48-106897Ø 32IC 80 bar48-87103Ø 40IC 80 bar48-106872Ø 1 1/4"IC 80 bar48-87104Ø 1 1/2"
Boring bar holder, double48-87149Ø 3248-87150Ø 1 1/4"
Cover plate48-87111
© WTO GmbH * Subject to change without notice * www.wto.de18
Doosan Puma 2100,2600(II) M/MS/Y/SY (BMT55)
-
Static Toolholders - Standard Program (24ST)
OD cutting holder48-920362048-920373/4"
OD cutting holder, HP-ICIC 80 bar48-92036-HP20IC 80 bar48-92037-HP3/4"
OD cutting holder, both sides48-920382048-920393/4"
OD cutting holder, both sides, HP-ICIC 80 bar48-92038-HP20IC 80 bar48-92039-HP3/4"
Face cutting holder48-920452048-920463/4"
Face cutting holder, HP-ICIC 80 bar48-92045-HP20IC 80 bar48-92046-HP3/4"
Combination toolholder, universal, LF=100IC 80 bar48-92043Ø 32
241132016 ER25
241132020 ER32
IC 80 bar48-92044Ø 1 1/4"2411125020 ER32
Boring bar holder, double48-87149Ø 3248-87150Ø 1 1/4"
Static Toolholders - Standard Program (24ST)
Cover plate48-87111
19© WTO GmbH * Subject to change without notice * www.wto.de
Doosan Puma 2100,2600(II) M/MS/Y/SY (BMT55)
-
Static Toolholders - Enhanced Program
OD cutting holder, double, 24 stationEC48-9206920
OD cutting holder, both sides, double, 24station
48-9207120
OD cutting holder, double, Y axis48-8714025(1")
OD cutting holder, both sides, double, Y axis48-8714125(1")
Cut-off holder, adjustable48-103287SH 32
Cut-off holder, adjustable, HP-ICIC 80 bar48-110160RSH 32IC 80 bar48-110160LSH 32
Boring bar holder, both sides, double, Y axis48-87147Ø 2548-87148Ø 1"
Boring bar holder, double, 24 station48-92073Ø 32
© WTO GmbH * Subject to change without notice * www.wto.de20
Doosan Puma 2100,2600(II) M/MS/Y/SY (BMT55)
-
Driven Toolholders - QuickFlex®
Straight drill/milling unitEC1:1420125015-55ER-25 QF
0067725000
IC 80 bar1:1420125016-55ER-25 QF0067725000
Right angle drill/milling unit, LF=70EC1:1420525015-55ER-25 QF
0067725000
IC 80 bar1:1420525016-55ER-25 QF0067725000
Right angle drill/milling unit, both sides,LF=70
EC1:1420525017-55ER-25 QF0067725000
Driven Toolholders - Enhanced Program
Straight drill/milling unitEC1:1410120010-55ER 32
0067725000
IC 80 bar1:1410120011-55ER 320067725000
Straight milling unit with combination millarbor DIN 6358
EC1:1410222004-55Ø 2200675000483
EC1:1410219002-55Ø 3/4"00675000483
Straight offset drill/milling unitEC1:1410116029-55ER 25
00675000932
IC 80 bar1:1410116030-55ER 2500675000932
EC1:2410113009-55ER 2000675000939
IC 80 bar1:2410113010-55ER 2000675000939
EC1:3410410004-55ER 1600675000937
IC 80 bar1:3410410005-55ER 1600675000937
21© WTO GmbH * Subject to change without notice * www.wto.de
Doosan Puma 2100,2600(II) M/MS/Y/SY (BMT55)
-
Driven Toolholders - Enhanced Program
Right angle drill/milling unit, LF=70EC1:1410520033-55ER 32
0067725000
IC 80 bar1:1410520034-55ER 320067725000
EC1:2420520012-55ER-20 QF0067720001
IC 80 bar1:2420520013-55ER-20 QF0067720001
EC1:3410810016-55ER 1600675000841
IC 80 bar1:3410810017-55ER 1600675000841
EC2:1420525030-55ER-25 QF0067725000
IC 80 bar2:1420525031-55ER-25 QF0067725000
Right anglemilling unit with combinationmillarbor DIN 6358, LF=70
EC1:1410622010-55Ø 2200675000483
EC1:1410619005-55Ø 3/4"00675000483
Right angle back set drill/milling unitEC1:1410516024-55ER 25
00675000801
IC 80 bar1:1410516025-55ER 2500675000801
Driven Toolholders - Enhanced Program
Adjustable angle drill/milling unitEC1:1411010005-55ER 16
00675000902
IC 80 bar1:1411010006-55ER 1600675000902
EC1:2411007007-55ER 1100675000914
IC 80 bar1:2411007008-55ER 1100675000914
Gear hobbing unitEC1:1411500002-55Type 16-1EC2:1411500001-55Type 16-1
00675000927
160016161 Ø 16
160022161 Ø 22
160027161 Ø 27
160015161 Ø 5/8"
160019161 Ø 3/4"
160025161 Ø 1"
160031161 Ø 1 1/4"
110587
Straight drill/milling unit, double, Y axisEC1:1413002004-55ER 25
00675000970
IC 80 bar1:1413002003-55ER 2500675000970
2-spindle - Right angle drill/milling unit, Yaxis
EC1:1413502007-55ER 2500675000915
IC 80 bar1:1413502008-55ER 2500675000915
© WTO GmbH * Subject to change without notice * www.wto.de22
Doosan Puma 2100,2600(II) M/MS/Y/SY (BMT55)
-
Driven Toolholders - Enhanced Program
2-spindle - Right angle drill/milling unit, bothsides, Y axis
EC1:1413502006-55ER 2500675000915
Broaching unit for ID and ODEC1:1414532001-55TN765050
23© WTO GmbH * Subject to change without notice * www.wto.de
Doosan Puma 2100,2600(II) M/MS/Y/SY (BMT55)
-
Static Toolholders - Standard Program
OD cutting holder48-924282548-924661"
OD cutting holder, HP-ICIC 80 bar48-92428-HP25IC 80 bar48-92466-HP1"
OD cutting holder, both sides48-924382548-924721"
OD cutting holder, both sides, HP-ICIC 80 bar48-92438-HP25IC 80 bar48-92472-HP1"
Face cutting holder, long48-929582548-929591"
Combination toolholder, LF=100IC 80 bar48-92397Ø 40
241140020 ER32
241140026 ER40
IC 80 bar48-92467Ø 50IC 80 bar48-92468Ø 1 1/2"
2411150020 ER32
IC 80 bar48-92469Ø 2"
Boring bar holder, both sides48-101033Ø 3248-113514Ø 1 1/4"
Static Toolholders - Standard Program
Boring bar holder, double48-84524Ø 3248-86905Ø 1 1/4"
Cover plate48-87089
© WTO GmbH * Subject to change without notice * www.wto.de24
Doosan Puma 2100,2600(II) M/MS/Y/SY (BMT65)
-
Static Toolholders - Enhanced Program
OD cutting holder, short48-869912548-869921"
OD cutting holder, short, HP-ICIC 80 bar48-86991-HP25IC 80 bar48-86992-HP1"
OD cutting holder, long48-867112548-867121"
OD cutting holder, both sides, long48-845232548-867181"
OD cutting holder, double, 24 station48-9208920
OD cutting holder, both sides, double, 24station
48-9209120
OD cutting holder, double, Y axis48-8610325(1")
OD cutting holder, both sides, double, Y axis48-8615025(1")
Static Toolholders - Enhanced Program
Cut-off holder, adjustable48-99060SH 32
Cut-off holder, adjustable, HP-ICIC 80 bar48-102256RSH 32IC 80 bar48-102256LSH 32
Cut-off holder, adjustable, long, HP-ICIC 80 bar48-100082RSH 32IC 80 bar48-100082LSH 32
Boring bar holder, double, 24 station48-92102Ø 25
Combination toolholder, both sides, double,24 station
48-109092Ø 2548-108887Ø 1"
Boring bar holder, double, both sides48-86160Ø 3248-86274Ø 1 1/4"
25© WTO GmbH * Subject to change without notice * www.wto.de
Doosan Puma 2100,2600(II) M/MS/Y/SY (BMT65)
-
Driven Toolholders - QuickFlex®
Straight drill/milling unitEC1:1420132015-65ER-32 QF
0067732000
IC 80 bar1:1420132016-65ER-32 QF0067732000
Right angle drill/milling unit, LF=100EC1:1420532018-65ER-32 QF
0067732000
IC 80 bar1:1420532019-65ER-32 QF0067732000
Right angle drill/milling unit, both sides,LF=100
EC1:1420532020-65ER-32 QF0067732000
Driven Toolholders - Enhanced Program
Straight drill/milling unitEC1:1410126001-65ER 40
00675000079
Straight milling unit with combination millarbor DIN 6358
EC1:1410222002-65Ø 2200675000483
EC1:1410225002-65Ø 1"00675000483
Straight offset drill/milling unitEC1:1420132037-65ER-32 QF
0067732000
IC 80 bar1:1420132038-65ER-32 QF0067732000
EC1:2420125010-65ER-25 QF0067725001
IC 80 bar1:2420125011-65ER-25 QF0067725001
Right angle drill/milling unit, LF=100EC1:1410526007-65ER 40
00675000079
IC 80 bar1:1410526008-65ER 4000675000079
Right angle drill/milling unit, LF=100EC1:2420525012-65ER-25 QF
0067725001
IC 80 bar1:2420525013-65ER-25 QF0067725001
EC2:1420532029-65ER-32 QF0067732000
IC 80 bar2:1420532030-65ER-32 QF0067732000
© WTO GmbH * Subject to change without notice * www.wto.de26
Doosan Puma 2100,2600(II) M/MS/Y/SY (BMT65)
-
Driven Toolholders - Enhanced Program
Right anglemilling unit with combinationmillarbor DIN 6358, LF=100
EC1:1410622002-65Ø 2200675000483
EC1:1410625002-65Ø 1"00675000483
Adjustable angle drill/milling unitEC1:1411010002-65ER 16
00675000902
IC 80 bar1:1411010003-65ER 1600675000902
EC1:2411007002-65ER 1100675000914
IC 80 bar1:2411007003-65ER 1100675000914
Gear hobbing unitEC1:1411500003-65Type 16-1EC2:1411500002-65Type 16-1
00675000927
160016161 Ø 16
160022161 Ø 22
160027161 Ø 27
160015161 Ø 5/8"
160019161 Ø 3/4"
160025161 Ø 1"
160031161 Ø 1 1/4"
110587
Straight drill/milling unit, both sidesEC1:1413002001-65ER 25
00675000907
Driven Toolholders - Enhanced Program
Straight drill/milling unit, double, Y axisEC1:1413002004-65ER 25
00675000907
2-spindle - Right angle drill/milling unit, Yaxis
EC1:1413502006-65ER 2500675000915
IC 80 bar1:1413502007-65ER 2500675000915
2-spindle - Right angle drill/milling unit, bothsides, Y axis
EC1:1413502008-65ER 2500675000915
Broaching unit for ID and ODEC1:1414532000-65TN765050
27© WTO GmbH * Subject to change without notice * www.wto.de
Doosan Puma 2100,2600(II) M/MS/Y/SY (BMT65)
-
Static Toolholders - Standard Program
OD cutting holder48-920362048-920373/4"
OD cutting holder, HP-ICIC 80 bar48-92036-HP20IC 80 bar48-92037-HP3/4"
OD cutting holder, both sides48-920382048-920393/4"
OD cutting holder, both sides, HP-ICIC 80 bar48-92038-HP20IC 80 bar48-92039-HP3/4"
Face cutting holder48-920452048-920463/4"
Face cutting holder, HP-ICIC 80 bar48-92045-HP20IC 80 bar48-92046-HP3/4"
Combination toolholder, LF=70IC 80 bar48-106897Ø 32IC 80 bar48-87103Ø 40IC 80 bar48-106872Ø 1 1/4"IC 80 bar48-87104Ø 1 1/2"
Cover plate48-87111
Static Toolholders - Enhanced Program
Cut-off holder, adjustable48-103287SH 32
Cut-off holder, adjustable, HP-ICIC 80 bar48-110160RSH 32IC 80 bar48-110160LSH 32
Boring bar holder, both sides, double, Y axis,short
48-98353Ø 25
© WTO GmbH * Subject to change without notice * www.wto.de28
Doosan Puma 2100,2600 Y/SY, Lynx 2600 Y/SY (16ST, BMT55)
-
Driven Toolholders - QuickFlex®
Straight drill/milling unitEC1:1420125015-55ER-25 QF
0067725000
IC 80 bar1:1420125016-55ER-25 QF0067725000
Right angle drill/milling unit, LF=70EC1:1420525015-55ER-25 QF
0067725000
IC 80 bar1:1420525016-55ER-25 QF0067725000
Right angle drill/milling unit, both sides,LF=70
EC1:1420525017-55ER-25 QF0067725000
Driven Toolholders - Enhanced Program
Straight drill/milling unitEC1:1410120010-55ER 32
0067725000
IC 80 bar1:1410120011-55ER 320067725000
Straight milling unit with combination millarbor DIN 6358
EC1:1410222004-55Ø 2200675000483
EC1:1410219002-55Ø 3/4"00675000483
Straight offset drill/milling unitEC1:1410116029-55ER 25
00675000932
IC 80 bar1:1410116030-55ER 2500675000932
EC1:2410113009-55ER 2000675000939
IC 80 bar1:2410113010-55ER 2000675000939
EC1:3410410004-55ER 1600675000937
IC 80 bar1:3410410005-55ER 1600675000937
29© WTO GmbH * Subject to change without notice * www.wto.de
Doosan Puma 2100,2600 Y/SY, Lynx 2600 Y/SY (16ST, BMT55)
-
Driven Toolholders - Enhanced Program
Right angle drill/milling unit, LF=70EC1:1410520033-55ER 32
0067725000
IC 80 bar1:1410520034-55ER 320067725000
EC1:2420520012-55ER-20 QF0067720001
IC 80 bar1:2420520013-55ER-20 QF0067720001
EC1:3410810016-55ER 1600675000841
IC 80 bar1:3410810017-55ER 1600675000841
EC2:1420525030-55ER-25 QF0067725000
IC 80 bar2:1420525031-55ER-25 QF0067725000
Right anglemilling unit with combinationmillarbor DIN 6358, LF=70
EC1:1410622010-55Ø 2200675000483
EC1:1410619005-55Ø 3/4"00675000483
Right angle back set drill/milling unitEC1:1410516024-55ER 25
00675000801
IC 80 bar1:1410516025-55ER 2500675000801
Driven Toolholders - Enhanced Program
Adjustable angle drill/milling unitEC1:1411010005-55ER 16
00675000902
IC 80 bar1:1411010006-55ER 1600675000902
EC1:2411007007-55ER 1100675000914
IC 80 bar1:2411007008-55ER 1100675000914
Gear hobbing unitEC1:1410900002-55Type 15-2
00675001015
160008152 Ø 8
160010152 Ø 10
160013152 Ø 13
160016152 Ø 16
160022152 Ø 22
160015152 Ø 5/8"
160019152 Ø 3/4"
110587
Broaching unit for ID and ODEC1:1414532001-55TN765050
© WTO GmbH * Subject to change without notice * www.wto.de30
Doosan Puma 2100,2600 Y/SY, Lynx 2600 Y/SY (16ST, BMT55)
-
Static Toolholders - Standard Program
OD cutting holder48-924282548-924661"
OD cutting holder, HP-ICIC 80 bar48-92428-HP25IC 80 bar48-92466-HP1"
Face cutting holder, long48-929582548-929591"
Combination toolholder, LF=100IC 80 bar48-92397Ø 40
241140020 ER32
241140026 ER40
IC 80 bar48-92467Ø 50IC 80 bar48-92468Ø 1 1/2"
2411150020 ER32
IC 80 bar48-92469Ø 2"
Boring bar holder, double48-84524Ø 3248-86905Ø 1 1/4"
Cover plate48-87089
Static Toolholders - Enhanced Program
OD cutting holder, short48-869912548-869921"
OD cutting holder, short, HP-ICIC 80 bar48-86991-HP25IC 80 bar48-86992-HP1"
OD cutting holder, long48-867112548-867121"
OD cutting holder, double, Y axis48-8610325(1")
Cut-off holder, adjustable48-99060SH 32
Cut-off holder, adjustable, HP-ICIC 80 bar48-102256RSH 32IC 80 bar48-102256LSH 32
Cut-off holder, adjustable, long, HP-ICIC 80 bar48-100082RSH 32IC 80 bar48-100082LSH 32
31© WTO GmbH * Subject to change without notice * www.wto.de
Doosan Puma 3100 M/Y, GT3100 M
-
Driven Toolholders - QuickFlex®
Straight drill/milling unitEC1:1420132015-65ER-32 QF
0067732000
IC 80 bar1:1420132016-65ER-32 QF0067732000
Right angle drill/milling unit, LF=100EC1:1420532018-65ER-32 QF
0067732000
IC 80 bar1:1420532019-65ER-32 QF0067732000
Driven Toolholders - Enhanced Program
Straight drill/milling unitEC1:1410126001-65ER 40
00675000079
Straight milling unit with combination millarbor DIN 6358
EC1:1410222002-65Ø 2200675000483
EC1:1410225002-65Ø 1"00675000483
Straight offset drill/milling unitEC1:1420132037-65ER-32 QF
0067732000
IC 80 bar1:1420132038-65ER-32 QF0067732000
EC1:2420125010-65ER-25 QF0067725001
IC 80 bar1:2420125011-65ER-25 QF0067725001
Right angle drill/milling unit, LF=100EC1:1410526007-65ER 40
00675000079
IC 80 bar1:1410526008-65ER 4000675000079
Right angle drill/milling unit, LF=100EC1:2420525012-65ER-25 QF
0067725001
IC 80 bar1:2420525013-65ER-25 QF0067725001
EC2:1420532029-65ER-32 QF0067732000
IC 80 bar2:1420532030-65ER-32 QF0067732000
© WTO GmbH * Subject to change without notice * www.wto.de32
Doosan Puma 3100 M/Y, GT3100 M
-
Driven Toolholders - Enhanced Program
Right anglemilling unit with combinationmillarbor DIN 6358, LF=100
EC1:1410622002-65Ø 2200675000483
EC1:1410625002-65Ø 1"00675000483
Adjustable angle drill/milling unitEC1:1411010002-65ER 16
00675000902
IC 80 bar1:1411010003-65ER 1600675000902
EC1:2411007002-65ER 1100675000914
IC 80 bar1:2411007003-65ER 1100675000914
Gear hobbing unitEC1:1411500003-65Type 16-1EC2:1411500002-65Type 16-1
00675000927
160016161 Ø 16
160022161 Ø 22
160027161 Ø 27
160015161 Ø 5/8"
160019161 Ø 3/4"
160025161 Ø 1"
160031161 Ø 1 1/4"
110587
Straight drill/milling unit, double, Y axisEC1:1413002004-65ER 25
00675000907
Driven Toolholders - Enhanced Program
2-spindle - Right angle drill/milling unit, Yaxis
EC1:1413502006-65ER 2500675000915
IC 80 bar1:1413502007-65ER 2500675000915
Broaching unit for ID and ODEC1:1414532000-65TN765050
33© WTO GmbH * Subject to change without notice * www.wto.de
Doosan Puma 3100 M/Y, GT3100 M
-
Static Toolholders - Standard Program
OD cutting holder48-964212548-964221"
Face cutting holder48-963552548-963571"
Combination toolholder, LF=90IC 80 bar48-104448Ø 60IC 80 bar48-104449Ø 2 1/2"
Static Toolholders - Enhanced Program
OD cutting holder, double, Y axis48-11231725(1")
VDI adapter, right, LF=11048-112600VDI 50
© WTO GmbH * Subject to change without notice * www.wto.de34
Doosan Puma 4100, 5100 M/LM/LY
-
Driven Toolholders - QuickFlex®
OD drill/milling unitEC1:1420140015-75ER-40 QF
0067740000
IC 80 bar1:1420140016-75ER-40 QF0067740000
Face drill/milling unit, LF=60EC1:1420540015-75ER-40 QF
0067740000
IC 80 bar1:1420540016-75ER-40 QF0067740000
Face drill/milling unit, LF=90EC1:1420540017-75ER-40 QF
0067740000
IC 80 bar1:1420540018-75ER-40 QF0067740000
Driven Toolholders - Enhanced Program
Face drill/milling unit, LF=60EC1:2420532010-75ER-32 QF
0067732001
IC 80 bar1:2420532011-75ER-32 QF0067732001
EC2:1420540021-75ER-40 QF0067740000
IC 80 bar2:1420540022-75ER-40 QF0067740000
Adjustable angle drill/milling unitEC1:1411016000-75ER 25
00675000934
IC 80 bar1:1411016001-75ER 2500675000934
EC1:2411010002-75ER 1600675000936
IC 80 bar1:2411010003-75ER 1600675000936
Gear hobbing unitEC2:1410900001-75Type C5-1
00675001008
160022C51 Ø 22
160027C51 Ø 27
160032C51 Ø 32
160015C51 Ø 5/8"
160019C51 Ø 3/4"
160025C51 Ø 1"
160031C51 Ø 1 1/4"
Broaching unit for ID and ODEC1:1414532000-75TN765050
35© WTO GmbH * Subject to change without notice * www.wto.de
Doosan Puma 4100, 5100 M/LM/LY
-
Static Toolholders - Standard Program
OD cutting holder48-956673248-956681 1/4"
Face cutting holder48-956693248-956701 1/4"
Combination toolholderIC 80 bar48-95671Ø 80IC 80 bar48-95672Ø 3"
© WTO GmbH * Subject to change without notice * www.wto.de36
Doosan Puma 600, 700, 800 M/LM/LY
-
Driven Toolholders - QuickFlex®
OD drill/milling unitEC1:1420150015-85ER-50 QF
0067750000
IC 80 bar1:1420150016-85ER-50 QF0067750000
Face drill/milling unit, LF=85EC1:1420550015-85ER-50 QF
0067750000
IC 80 bar1:1420550016-85ER-50 QF0067750000
Driven Toolholders - Enhanced Program
Face drill/milling unit, LF=85EC1:2420540015-85ER-40 QF
0067740001
IC 80 bar1:2420540016-85ER-40 QF0067740001
Adjustable angle drill/milling unitEC1:1421032010-85ER-32 QF
00675000976
IC 80 bar1:1421032011-85ER-32 QF00675000976
Gear hobbing unitEC2:1410900000-85Type C5-1
00675001008
160022C51 Ø 22
160027C51 Ø 27
160032C51 Ø 32
160019C51 Ø 3/4"
160025C51 Ø 1"
160031C51 Ø 1 1/4"
37© WTO GmbH * Subject to change without notice * www.wto.de
Doosan Puma 600, 700, 800 M/LM/LY
-
Static Toolholders - Standard Program
OD cutting holder48-950832048-950843/4"
OD cutting holder, HP-ICIC 80 bar48-100605-HP20IC 80 bar48-104395-HP25IC 80 bar48-108926-HP3/4"IC 80 bar48-104396-HP1"
OD cutting holder, both sides48-950852048-950863/4"
OD cutting holder, both sides, HP-ICIC 80 bar48-95085-HP20IC 80 bar48-95086-HP3/4"
Face cutting holder48-10914820
Face cutting holder48-953383/4"
Face cutting holder, HP-ICIC 80 bar48-109148-HP20IC 80 bar48-104397-HP25IC 80 bar48-109149-HP3/4"IC 80 bar48-104398-HP1"
Static Toolholders - Standard Program
Combination toolholder, universal, LF=85IC 80 bar48-95998Ø 32
241132016 ER25
241132020 ER32
IC 80 bar48-96029Ø 1 1/4"2411125020 ER32
© WTO GmbH * Subject to change without notice * www.wto.de38
Doosan Puma MX1600 ST (BMT45)
-
Static Toolholders - Enhanced Program
Cut-off holder, adjustable48-94968SH 26
Cut-off holder, adjustable, HP-ICIC 80 bar48-102252RSH 26IC 80 bar48-102252LSH 26
39© WTO GmbH * Subject to change without notice * www.wto.de
Doosan Puma MX1600 ST (BMT45)
-
Driven Toolholders - QuickFlex®
Straight drill/milling unitEC1:1420125015-45ER-25 QF
0067725000
IC 80 bar1:1420125016-45ER-25 QF0067725000
Right angle drill/milling unitEC1:1420525015-45ER-25 QF
0067725000
IC 80 bar1:1420525016-45ER-25 QF0067725000
Driven Toolholders - Enhanced Program
Straight offset drill/milling unitEC1:3410410008-45ER 16
00675000937
IC 80 bar1:3410410002-45ER 1600675000937
Right angle drill/milling unitEC1:2420520018-45ER-20 QF
0067720001
IC 80 bar1:2420520019-45ER-20 QF0067720001
EC2:1420525020-45ER-25 QF0067725000
IC 80 bar2:1420525021-45ER-25 QF0067725000
Adjustable angle drill/milling unitEC1:1411010002-45ER 16
00675000902
IC 80 bar1:1411010003-45ER 1600675000902
EC1:2411007004-45ER 1100675000914
IC 80 bar1:2411007005-45ER 1100675000914
© WTO GmbH * Subject to change without notice * www.wto.de40
Doosan Puma MX1600 ST (BMT45)
-
Driven Toolholders - Enhanced Program
Gear hobbing unitEC1:1410900001-45Type 15-2
00675001015
160008152 Ø 8
160010152 Ø 10
160013152 Ø 13
160016152 Ø 16
160022152 Ø 22
160015152 Ø 5/8"
160019152 Ø 3/4"
110587
Broaching unit for ID and ODEC1:1414532000-45TN765050
41© WTO GmbH * Subject to change without notice * www.wto.de
Doosan Puma MX1600 ST (BMT45)
-
Static Toolholders - Standard Program
OD cutting holder48-920362048-920373/4"
OD cutting holder, HP-ICIC 80 bar48-92036-HP20IC 80 bar48-92037-HP3/4"
OD cutting holder, both sides48-920382048-920393/4"
OD cutting holder, both sides, HP-ICIC 80 bar48-92038-HP20IC 80 bar48-92039-HP3/4"
Face cutting holder48-920452048-920463/4"
Face cutting holder, HP-ICIC 80 bar48-92045-HP20IC 80 bar48-92046-HP3/4"
Combination toolholder, universal, LF=100IC 80 bar48-92043Ø 32
241132016 ER25
241132020 ER32
IC 80 bar48-92044Ø 1 1/4"2411125020 ER32
Combination toolholder, universal, LF=100IC 80 bar48-103474Ø 40
241140020 ER32
241140026 ER40
Static Toolholders - Enhanced Program
OD cutting holder, double, 24 station48-8767420
OD cutting holder, both sides, double, 24station
48-9298020
Cut-off holder, adjustable48-103287SH 32
Cut-off holder, adjustable, HP-ICIC 80 bar48-110160RSH 32IC 80 bar48-110160LSH 32
Cut-off holder, adjustable, long48-103288SH 32
Cut-off holder, adjustable, long, HP-ICIC 80 bar48-111142R
343-810100R90SH 32
IC 80 bar48-111142L343-810100L90
SH 32
Boring bar holder, double, 24 station48-87678Ø 25
© WTO GmbH * Subject to change without notice * www.wto.de42
Doosan Puma MX1600, 2100 ST (BMT55)
-
Driven Toolholders - QuickFlex®
Straight drill/milling unitEC1:1420125015-55ER-25 QF
0067725000
IC 80 bar1:1420125016-55ER-25 QF0067725000
Right angle drill/milling unit, LF=85EC1:1420525018-55ER-25 QF
0067725000
IC 80 bar1:1420525019-55ER-25 QF0067725000
Right angle drill/milling unit, both sides,LF=85
EC1:1420525020-55ER-25 QF0067725000
Driven Toolholders - Enhanced Program
Straight drill/milling unitEC1:1410120010-55ER 32
0067725000
IC 80 bar1:1410120011-55ER 320067725000
Straight milling unit with combination millarbor DIN 6358
EC1:1410222004-55Ø 2200675000483
EC1:1410219002-55Ø 3/4"00675000483
Straight offset drill/milling unitEC1:1410116029-55ER 25
00675000932
IC 80 bar1:1410116030-55ER 2500675000932
EC1:2410113009-55ER 2000675000939
IC 80 bar1:2410113010-55ER 2000675000939
EC1:3410410004-55ER 1600675000937
IC 80 bar1:3410410005-55ER 1600675000937
43© WTO GmbH * Subject to change without notice * www.wto.de
Doosan Puma MX1600, 2100 ST (BMT55)
-
Driven Toolholders - Enhanced Program
Right angle drill/milling unit, LF=85EC1:1410520030-55ER 32
0067725000
IC 80 bar1:1410520031-55ER 320067725000
EC1:2420520014-55ER-20 QF0067720001
IC 80 bar1:2420520015-55ER-20 QF0067720001
EC1:3410810020-55ER 1600675000841
IC 80 bar1:3410810021-55ER 1600675000841
EC2:1420525032-55ER-25 QF0067725000
IC 80 bar2:1420525033-55ER-25 QF0067725000
Right anglemilling unit with combinationmillarbor DIN 6358, LF=85
EC1:1410622011-55Ø 2200675000483
EC1:1410619006-55Ø 3/4"00675000483
Adjustable angle drill/milling unitEC1:1411010005-55ER 16
00675000902
IC 80 bar1:1411010006-55ER 1600675000902
EC1:2411007007-55ER 1100675000914
IC 80 bar1:2411007008-55ER 1100675000914
Driven Toolholders - Enhanced Program
Broaching unit for ID and ODEC1:1414532000-55TN765050
© WTO GmbH * Subject to change without notice * www.wto.de44
Doosan Puma MX1600, 2100 ST (BMT55)
-
Static Toolholders - Standard Program
OD cutting holder48-924282548-924661"
OD cutting holder, HP-ICIC 80 bar48-92428-HP25IC 80 bar48-92466-HP1"
OD cutting holder, long48-867112548-867121"
OD cutting holder, both sides48-924382548-924721"
OD cutting holder, both sides, HP-ICIC 80 bar48-92438-HP25IC 80 bar48-92472-HP1"
OD cutting holder, both sides, long48-845232548-867181"
Face cutting holder48-867192548-867201"
Face cutting holder, HP-ICIC 80 bar48-109249-HP25IC 80 bar48-109250-HP1"
Static Toolholders - Standard Program
Combination toolholder, LF=100IC 80 bar48-92397Ø 40
241140020 ER32
241140026 ER40
IC 80 bar48-92467Ø 50IC 80 bar48-92468Ø 1 1/2"
2411150020 ER32
IC 80 bar48-92469Ø 2"
Boring bar holder, both sides48-101033Ø 3248-113514Ø 1 1/4"
Cover plate48-87089
45© WTO GmbH * Subject to change without notice * www.wto.de
Doosan Puma SMX2600, 3100 ST
-
Static Toolholders - Enhanced Program
Cut-off holder, adjustable48-99060SH 32
Cut-off holder, adjustable, long48-100084SH 32
Cut-off holder, adjustable, HP-ICIC 80 bar48-102256RSH 32IC 80 bar48-102256LSH 32
Cut-off holder, adjustable, long, HP-ICIC 80 bar48-100082RSH 32IC 80 bar48-100082LSH 32
© WTO GmbH * Subject to change without notice * www.wto.de46
Doosan Puma SMX2600, 3100 ST
-
Driven Toolholders - QuickFlex®
Straight drill/milling unitEC1:1420132015-65ER-32 QF
0067732000
IC 80 bar1:1420132016-65ER-32 QF0067732000
Right angle drill/milling unit, LF=100EC1:1420532018-65ER-32 QF
0067732000
IC 80 bar1:1420532019-65ER-32 QF0067732000
Right angle drill/milling unit, both sides,LF=100
EC1:1420532020-65ER-32 QF0067732000
Driven Toolholders - Enhanced Program
Straight drill/milling unitEC1:1410126001-65ER 40
00675000079
Straight milling unit with combination millarbor DIN 6358
EC1:1410222002-65Ø 2200675000483
EC1:1410225002-65Ø 1"00675000483
Straight offset drill/milling unitEC1:1420132037-65ER-32 QF
0067732000
IC 80 bar1:1420132038-65ER-32 QF0067732000
EC1:2420125010-65ER-25 QF0067725001
IC 80 bar1:2420125011-65ER-25 QF0067725001
Right angle drill/milling unit, LF=100EC1:1410526007-65ER 40
00675000079
IC 80 bar1:1410526008-65ER 4000675000079
Right angle drill/milling unit, LF=100EC1:2420525012-65ER-25 QF
0067725001
IC 80 bar1:2420525013-65ER-25 QF0067725001
EC2:1420532029-65ER-32 QF0067732000
IC 80 bar2:1420532030-65ER-32 QF0067732000
47© WTO GmbH * Subject to change without notice * www.wto.de
Doosan Puma SMX2600, 3100 ST
-
Driven Toolholders - Enhanced Program
Right anglemilling unit with combinationmillarbor DIN 6358, LF=100
EC1:1410622002-65Ø 2200675000483
EC1:1410625002-65Ø 1"00675000483
Adjustable angle drill/milling unitEC1:1411010002-65ER 16
00675000902
IC 80 bar1:1411010003-65ER 1600675000902
EC1:2411007002-65ER 1100675000914
IC 80 bar1:2411007003-65ER 1100675000914
Straight drill/milling unit, both sidesEC1:1413002001-65ER 25
00675000907
Broaching unit for ID and ODEC1:1414532000-65TN765050
© WTO GmbH * Subject to change without notice * www.wto.de48
Doosan Puma SMX2600, 3100 ST
-
Static Toolholders - Standard Program
OD cutting holder48-950832048-950843/4"
OD cutting holder, HP-ICIC 80 bar48-100605-HP20IC 80 bar48-104395-HP25IC 80 bar48-108926-HP3/4"IC 80 bar48-104396-HP1"
OD cutting holder, both sides48-950852048-950863/4"
OD cutting holder, both sides, HP-ICIC 80 bar48-95085-HP20IC 80 bar48-95086-HP3/4"
Face cutting holder48-10914820
Face cutting holder48-953383/4"
Face cutting holder, HP-ICIC 80 bar48-109148-HP20IC 80 bar48-104397-HP25IC 80 bar48-109149-HP3/4"IC 80 bar48-104398-HP1"
Combination toolholder, LF=65IC 80 bar48-95090Ø 40IC 80 bar48-95327Ø 1 1/2"
Static Toolholders - Enhanced Program
OD cutting holder, both sides, double, Y axis48-11081120 (3/4")
Cut-off holder, adjustable48-94968SH 26
Cut-off holder, adjustable, HP-ICIC 80 bar48-102252RSH 26IC 80 bar48-102252LSH 26
49© WTO GmbH * Subject to change without notice * www.wto.de
Doosan Puma TT1300 SY/SYY
-
Driven Toolholders - QuickFlex®
Straight drill/milling unitEC1:1420125015-45ER-25 QF
0067725000
IC 80 bar1:1420125016-45ER-25 QF0067725000
Straight drill/milling unit (12000 RPM)EC1:1420125019-45ER-25 QF
0067725000
IC 80 bar1:1420125020-45ER-25 QF0067725000
Right angle drill/milling unitEC1:1420525015-45ER-25 QF
0067725000
IC 80 bar1:1420525016-45ER-25 QF0067725000
Right angle drill/milling unit (12000 RPM)EC1:1420525038-45ER-25 QF
0067725000
IC 80 bar1:1420525039-45ER-25 QF0067725000
Driven Toolholders - Enhanced Program
Straight offset drill/milling unitEC1:3410410008-45ER 16
00675000937
IC 80 bar1:3410410002-45ER 1600675000937
Right angle drill/milling unitEC1:2420520018-45ER-20 QF
0067720001
IC 80 bar1:2420520019-45ER-20 QF0067720001
EC2:1420525020-45ER-25 QF0067725000
IC 80 bar2:1420525021-45ER-25 QF0067725000
Adjustable angle drill/milling unitEC1:1411010002-45ER 16
00675000902
IC 80 bar1:1411010003-45ER 1600675000902
EC1:2411007004-45ER 1100675000914
IC 80 bar1:2411007005-45ER 1100675000914
© WTO GmbH * Subject to change without notice * www.wto.de50
Doosan Puma TT1300 SY/SYY
-
Driven Toolholders - Enhanced Program
Gear hobbing unitEC1:1410900001-45Type 15-2
00675001015
160008152 Ø 8
160010152 Ø 10
160013152 Ø 13
160016152 Ø 16
160022152 Ø 22
160015152 Ø 5/8"
160019152 Ø 3/4"
110587
Straight drill/milling unit, double, Y axisEC1:1413002006-45ER 20
00675000947
IC 80 bar1:1413002008-45ER 2000675000947
Broaching unit for ID and ODEC1:1414532000-45TN765050
51© WTO GmbH * Subject to change without notice * www.wto.de
Doosan Puma TT1300 SY/SYY
-
Static Toolholders - Standard Program
OD cutting holder48-920362048-920373/4"
OD cutting holder, HP-ICIC 80 bar48-92036-HP20IC 80 bar48-92037-HP3/4"
OD cutting holder, both sides48-920382048-920393/4"
OD cutting holder, both sides, HP-ICIC 80 bar48-92038-HP20IC 80 bar48-92039-HP3/4"
Face cutting holder48-920452048-920463/4"
Face cutting holder, HP-ICIC 80 bar48-92045-HP20IC 80 bar48-92046-HP3/4"
Combination toolholder, universal, LF=100IC 80 bar48-92043Ø 32
241132016 ER25
241132020 ER32
IC 80 bar48-92044Ø 1 1/4"2411125020 ER32
Cover plate48-87111
Static Toolholders - Enhanced Program
OD cutting holder, double, 24 station48-8767420
OD cutting holder, both sides, double, 24station
48-9298020
Cut-off holder, adjustable48-103287SH 32
Cut-off holder, adjustable, HP-ICIC 80 bar48-110160RSH 32IC 80 bar48-110160LSH 32
Cut-off holder, adjustable, long48-103288SH 32
Cut-off holder, adjustable, long, HP-ICIC 80 bar48-111142R
343-810100R90SH 32
IC 80 bar48-111142L343-810100L90
SH 32
Boring bar holder, double, 24 station48-87678Ø 25
© WTO GmbH * Subject to change without notice * www.wto.de52
Doosan Puma TT1500, 1800, 2100 MS/SY/SYY
-
Driven Toolholders - QuickFlex®
Straight drill/milling unitEC1:1420125015-55ER-25 QF
0067725000
IC 80 bar1:1420125016-55ER-25 QF0067725000
Right angle drill/milling unit, LF=85EC1:1420525018-55ER-25 QF
0067725000
IC 80 bar1:1420525019-55ER-25 QF0067725000
Right angle drill/milling unit, both sides,LF=85
EC1:1420525020-55ER-25 QF0067725000
Driven Toolholders - Enhanced Program
Straight drill/milling unitEC1:1410120010-55ER 32
0067725000
IC 80 bar1:1410120011-55ER 320067725000
Straight milling unit with combination millarbor DIN 6358
EC1:1410222004-55Ø 2200675000483
EC1:1410219002-55Ø 3/4"00675000483
Straight offset drill/milling unitEC1:1410116029-55ER 25
00675000932
IC 80 bar1:1410116030-55ER 2500675000932
EC1:2410113009-55ER 2000675000939
IC 80 bar1:2410113010-55ER 2000675000939
EC1:3410410004-55ER 1600675000937
IC 80 bar1:3410410005-55ER 1600675000937
53© WTO GmbH * Subject to change without notice * www.wto.de
Doosan Puma TT1500, 1800, 2100 MS/SY/SYY
-
Driven Toolholders - Enhanced Program
Right angle drill/milling unit, LF=85EC1:1410520030-55ER 32
0067725000
IC 80 bar1:1410520031-55ER 320067725000
EC1:2420520014-55ER-20 QF0067720001
IC 80 bar1:2420520015-55ER-20 QF0067720001
EC1:3410810020-55ER 1600675000841
IC 80 bar1:3410810021-55ER 1600675000841
EC2:1420525032-55ER-25 QF0067725000
IC 80 bar2:1420525033-55ER-25 QF0067725000
Right anglemilling unit with combinationmillarbor DIN 6358, LF=85
EC1:1410622011-55Ø 2200675000483
EC1:1410619006-55Ø 3/4"00675000483
Adjustable angle drill/milling unitEC1:1411010005-55ER 16
00675000902
IC 80 bar1:1411010006-55ER 1600675000902
EC1:2411007007-55ER 1100675000914
IC 80 bar1:2411007008-55ER 1100675000914
Driven Toolholders - Enhanced Program
Gear hobbing unitEC1:1411500002-55Type 16-1EC2:1411500001-55Type 16-1
00675000927
160016161 Ø 16
160022161 Ø 22
160027161 Ø 27
160015161 Ø 5/8"
160019161 Ø 3/4"
160025161 Ø 1"
160031161 Ø 1 1/4"
110587
Straight drill/milling unit, double, Y axisEC1:1413002004-55ER 25
00675000970
IC 80 bar1:1413002003-55ER 2500675000970
2-spindle - Right angle drill/milling unit, Yaxis
EC1:1413502007-55ER 2500675000915
IC 80 bar1:1413502008-55ER 2500675000915
2-spindle - Right angle drill/milling unit, bothsides, Y axis
EC1:1413502006-55ER 2500675000915
Broaching unit for ID and ODEC1:1414532000-55TN765050
© WTO GmbH * Subject to change without notice * www.wto.de54
Doosan Puma TT1500, 1800, 2100 MS/SY/SYY
-
Static Toolholders - Standard Program
OD cutting holder48-924282548-924661"
OD cutting holder, HP-ICIC 80 bar48-92428-HP25IC 80 bar48-92466-HP1"
OD cutting holder, long48-867112548-867121"
OD cutting holder, both sides48-924382548-924721"
OD cutting holder, both sides, HP-ICIC 80 bar48-92438-HP25IC 80 bar48-92472-HP1"
OD cutting holder, both sides, long48-845232548-867181"
Face cutting holder48-867192548-867201"
Face cutting holder, HP-ICIC 80 bar48-109249-HP25IC 80 bar48-109250-HP1"
Static Toolholders - Standard Program
Combination toolholder, LF=115IC 80 bar48-86623Ø 40
241140020 ER32
241140026 ER40
IC 80 bar48-86624Ø 1 1/2"2411150020 ER32
Cover plate48-87089
55© WTO GmbH * Subject to change without notice * www.wto.de
Doosan Puma TT2000, 2500 MS/SY
-
Static Toolholders - Enhanced Program
OD cutting holder, double, Y axis48-8610325(1")
OD cutting holder, both sides, double, Y axis48-8615025(1")
Cut-off holder, adjustable48-99060SH 32
Cut-off holder, adjustable, long48-100084SH 32
Cut-off holder, adjustable, HP-ICIC 80 bar48-102256RSH 32IC 80 bar48-102256LSH 32
Cut-off holder, adjustable, long, HP-ICIC 80 bar48-100082RSH 32IC 80 bar48-100082LSH 32
© WTO GmbH * Subject to change without notice * www.wto.de56
Doosan Puma TT2000, 2500 MS/SY
-
Driven Toolholders - QuickFlex®
Straight drill/milling unitEC1:1420132015-65ER-32 QF
0067732000
IC 80 bar1:1420132016-65ER-32 QF0067732000
Right angle drill/milling unit, LF=100EC1:1420532018-65ER-32 QF
0067732000
IC 80 bar1:1420532019-65ER-32 QF0067732000
Right angle drill/milling unit, both sides,LF=100
EC1:1420532020-65ER-32 QF0067732000
Driven Toolholders - Enhanced Program
Straight drill/milling unitEC1:1410126001-65ER 40
00675000079
Straight milling unit with combination millarbor DIN 6358
EC1:1410222002-65Ø 2200675000483
EC1:1410225002-65Ø 1"00675000483
Straight offset drill/milling unitEC1:1420132037-65ER-32 QF
0067732000
IC 80 bar1:1420132038-65ER-32 QF0067732000
EC1:2420125010-65ER-25 QF0067725001
IC 80 bar1:2420125011-65ER-25 QF0067725001
Right angle drill/milling unit, LF=100EC1:1410526007-65ER 40
00675000079
IC 80 bar1:1410526008-65ER 4000675000079
Right angle drill/milling unit, LF=100EC1:2420525012-65ER-25 QF
0067725001
IC 80 bar1:2420525013-65ER-25 QF0067725001
EC2:1420532029-65ER-32 QF0067732000
IC 80 bar2:1420532030-65ER-32 QF0067732000
57© WTO GmbH * Subject to change without notice * www.wto.de
Doosan Puma TT2000, 2500 MS/SY
-
Driven Toolholders - Enhanced Program
Right anglemilling unit with combinationmillarbor DIN 6358, LF=100
EC1:1410622002-65Ø 2200675000483
EC1:1410625002-65Ø 1"00675000483
Adjustable angle drill/milling unitEC1:1411010002-65ER 16
00675000902
IC 80 bar1:1411010003-65ER 1600675000902
EC1:2411007002-65ER 1100675000914
IC 80 bar1:2411007003-65ER 1100675000914
Gear hobbing unitEC1:1411500003-65Type 16-1EC2:1411500002-65Type 16-1
00675000927
160016161 Ø 16
160022161 Ø 22
160027161 Ø 27
160015161 Ø 5/8"
160019161 Ø 3/4"
160025161 Ø 1"
160031161 Ø 1 1/4"
110587
Straight drill/milling unit, both sidesEC1:1413002001-65ER 25
00675000907
Driven Toolholders - Enhanced Program
Straight drill/milling unit, double, Y axisEC1:1413002004-65ER 25
00675000907
2-spindle - Right angle drill/milling unit, Yaxis
EC1:1413502006-65ER 2500675000915
IC 80 bar1:1413502007-65ER 2500675000915
2-spindle - Right angle drill/milling unit, bothsides, Y axis
EC1:1413502008-65ER 2500675000915
Broaching unit for ID and ODEC1:1414532000-65TN765050
© WTO GmbH * Subject to change without notice * www.wto.de58
Doosan Puma TT2000, 2500 MS/SY
-
Standard reduction sleeves - cylindrical
Reduction sleeve Ø 20ø 6240020006ø 8240020008ø 10240020010ø 12240020012ø 14240020014ø 16240020016
Reduction sleeve Ø 25ø 6240025006ø 8240025008ø 10240025010ø 12240025012ø 14240025014ø 16240025016ø 20240025020
Reduction sleeve Ø 32ø 6240032006ø 8240032008ø 10240032010ø 12240032012ø 14240032014ø 16240032016ø 18240032018ø 20240032020ø 25240032025
Reduction sleeve Ø 40ø 6240040006ø 8240040008ø 10240040010ø 12240040012ø 14240040014ø 16240040016ø 20240040020ø 25240040025ø 32240040032
Reduction sleeve Ø 50ø 10240050010ø 12240050012ø 16240050016ø 20240050020ø 25240050025ø 25240050025ø 32240050032ø 40240050040
Standard reduction sleeves - cylindrical
Reduction sleeve Ø 60ø 12240060012ø 16240060016ø 20240060020ø 25240060025ø 32240060032ø 40240060040ø 50240060050
Reduction sleeve Ø 80ø 20240080020ø 25240080025ø 32240080032ø 40240080040ø 50240080050ø 60240080060
Reduction sleeve Ø 1"ø 1/4"2400100025ø 5/16"2400100031ø 3/8"2400100038ø 1/2"2400100050ø 5/8"2400100063ø 3/4"2400100075
Reduction sleeve Ø 1 1/4"ø 3/8"2400125038ø 1/2"2400125050ø 5/8"2400125063ø 3/4"2400125075ø 7/8"2400125088ø 1"2400125100
Reduction sleeve Ø 1 1/2"ø 3/8"2400150038ø 1/2"2400150050ø 5/8"2400150063ø 3/4"2400150075ø 7/8"2400150088ø 1"2400150100ø 1 1/4"2400150125
Reduction sleeve Ø 2"ø 1/2"2400200050ø 5/8"2400200063ø 7/8"2400200088ø 1"2400200100ø 1 1/4"2400200125ø 1 1/2"2400200150ø 1 3/4"2400200175
59© WTO GmbH * Subject to change without notice * www.wto.de
Accessories - Reduction sleeves
-
Standard reduction sleeves - cylindrical, withslot
Reduction sleeve Ø 40ø 10240140010ø 12240140012ø 15240140015ø 16240140016ø 20240140020ø 25240140025ø 32240140032
Standard reduction sleeves - morse taper
Reduction sleeve Ø 32MT 1240532001MT 2240532002MT 3240532003
Reduction sleeve Ø 40MT 1240540001MT 2240540002MT 3240540003MT 4240540004
Reduction sleeve Ø 50MT 2240550002MT 3240550003MT 4240550004
© WTO GmbH * Subject to change without notice * www.wto.de60
Accessories - Reduction sleeves
-
Collets DIN 6499B (ER/ESX)
inchmmER 11ø 0.276-0.020ø 7-0.5190011000ø 0.039-0.020ø 1-0.5190011010ø 0.059-0.039ø 1.5-1190011015ø 0.079-0.059ø 2-1.5190011020ø 0.098-0.079ø 2.5-2190011025ø 0.118-0.098ø 3-2.5190011030ø 0.138-0.118ø 3.5-3190011035ø 0.158-0.138ø 4-3.5190011040ø 0.177-0.158ø 4.5-4190011045ø 0.197-0.177ø 5-4.5190011050ø 0.217-0.197ø 5.5-5190011055ø 0.236-0.217ø 6-5.5190011060ø 0.256-0.236ø 6.5-6190011065ø 0.276-0.256ø 7-6.5190011070
inchmmER 16ø 0.394-0.020ø 10-0.5190016000ø 0.039-0.020ø 1-0.5190016010ø 0.079-0.039ø 2-1190016020ø 0.118-0.079ø 3-2190016030ø 0.158-0.118ø 4-3190016040ø 0.197-0.158ø 5-4190016050ø 0.236-0.197ø 6-5190016060ø 0.276-0.236ø 7-6190016070ø 0.315-0.276ø 8-7190016080ø 0.354-0.315ø 9-8190016090ø 0.394-0.354ø 10-9190016100
inchmmER 20ø 0.512-0.039ø 13-1190020000ø 0.039-0.020ø 1-0.5190020010ø 0.079-0.039ø 2-1190020020ø 0.118-0.079ø 3-2190020030ø 0.157-0.118ø 4-3190020040ø 0.197-0.157ø 5-4190020050ø 0.236-0.197ø 6-5190020060ø 0.276-0.236ø 7-6190020070ø 0.315-0.276ø 8-7190020080ø 0.354-0.315ø 9-8190020090ø 0.394-0.354ø 10-9190020100ø 0.433-0.394ø 11-10190020110ø 0.472-0.433ø 12-11190020120ø 0.512-0.472ø 13-12190020130
Collets DIN 6499B (ER/ESX)
inchmmER 25ø 0.630-0.039ø 16-1190025000ø 0.079-0.039ø 2-1190025020ø 0.118-0.079ø 3-2190025030ø 0.157-0.118ø 4-3190025040ø 0.197-0.157ø 5-4190025050ø 0.236-0.197ø 6-5190025060ø 0.276-0.236ø 7-6190025070ø 0.315-0.276ø 8-7190025080ø 0.354-0.315ø 9-8190025090ø 0.394-0.354ø 10-9190025100ø 0.433-0.394ø 11-10190025110ø 0.472-0.433ø 12-11190025120ø 0.512-0.472ø 13-12190025130ø 0.551-0.512ø 14-13190025140ø 0.591-0.551ø 15-14190025150ø 0.630-0.591ø 16-15190025160
inchmmER 32ø 0.787-0.079ø 20-2190032000ø 0.118-0.079ø 3-2190032030ø 0.157-0.118ø 4-3190032040ø 0.197-0.157ø 5-4190032050ø 0.236-0.197ø 6-5190032060ø 0.276-0.236ø 7-6190032070ø 0.315-0.276ø 8-7190032080ø 0.354-0.315ø 9-8190032090ø 0.394-0.354ø 10-9190032100ø 0.433-0.394ø 11-10190032110ø 0.472-0.433ø 12-11190032120ø 0.512-0.472ø 13-12190032130ø 0.551-0.512ø 14-13190032140ø 0.591-0.551ø 15-14190032150ø 0.630-0.591ø 16-15190032160ø 0.669-0.630ø 17-16190032170ø 0.709-0.669ø 18-17190032180ø 0.748-0.709ø 19-18190032190ø 0.787-0.748ø 20-19190032200
61© WTO GmbH * Subject to change without notice * www.wto.de
Accessories - Collets
-
Collets DIN 6499B (ER/ESX)
inchmmER 40ø 1.024-0.118ø 26-3190040000ø 0.157-0.118ø 4-3190040040ø 0.197-0.157ø 5-4190040050ø 0.236-0.197ø 6-5190040060ø 0.276-0.236ø 7-6190040070ø 0.315-0.276ø 8-7190040080ø 0.354-0.315ø 9-8190040090ø 0.394-0.354ø 10-9190040100ø 0.433-0.394ø 11-10190040110ø 0.472-0.433ø 12-11190040120ø 0.512-0.472ø 13-12190040130ø 0.551-0.512ø 14-13190040140ø 0.591-0.551ø 15-14190040150ø 0.630-0.591ø 16-15190040160ø 0.669-0.630ø 17-16190040170ø 0.709-0.669ø 18-17190040180ø 0.748-0.709ø 19-18190040190ø 0.787-0.748ø 20-19190040200ø 0.827-0.787ø 21-20190040210ø 0.866-0.827ø 22-21190040220ø 0.906-0.866ø 23-22190040230ø 0.945-0.906ø 24-23190040240ø 0.984-0.945ø 25-24190040250ø 1.024-0.984ø 26-25190040260
inchmmER 50ø 1.339-0.394ø 34-10190050000ø 0.236-0.157ø 6-4190050060ø 0.315-0.236ø 8-6190050080ø 0.394-0.315ø 10-8190050100ø 0.472-0.394ø 12-10190050120ø 0.551-0.472ø 14-12190050140ø 0.630-0.551ø 16-14190050160ø 0,709-0,630ø 18-16190050180ø 0.787-0.709ø 20-18190050200ø 0.866-0.787ø 22-20190050220ø 0.945-0.866ø 24-22190050240ø 1.024-0.945ø 26-24190050260ø 1.102-1.024ø 28-26190050280ø 1.181-1.102ø 30-28190050300ø 1.260-1.181ø 32-30190050320ø 1.339-1.260ø 34-32190050340
Collets DIN 6499D (ER/ESX) - sealed, for IC
inchmmER 11ø 3191011030ø 4191011040ø 5191011050ø 6191011060
ø 0.125191111013-inø 0.188191111019-inø 0.25191111025-in
inchmmER 16ø 3-10191016000ø 3191016030ø 4191016040ø 5191016050ø 6191016060ø 7191016070ø 8191016080ø 9191016090ø 10191016100
ø 0.125-0.375191116001ø 0.125191116013-inø 0.188191116019-inø 0.25191116025-inø 0.313191116031-inø 0.375191116038-in
inchmmER 20ø 3-12191020000ø 3191020030ø 4191020040ø 5191020050ø 6191020060ø 7191020070ø 8191020080ø 9191020090ø 10191020100ø 11191020110ø 12191020120
ø 0.125-0.5191120001ø 0.125191120013-inø 0.188191120019-inø 0.25191120025-inø 0.313191120031-inø 0.375191120038-inø 0.438191120044-inø 0.5191120050-in
© WTO GmbH * Subject to change without notice * www.wto.de62
Accessories - Collets
-
Collets DIN 6499D (ER/ESX) - sealed, for IC
inchmmER 25ø 4-16191025000ø 3191025030ø 4191025040ø 5191025050ø 6191025060ø 7191025070ø 8191025080ø 9191025090ø 10191025100ø 11191025110ø 12191025120ø 13191025130ø 14191025140ø 15191025150ø 16191025160
ø 0.25-0.625191125001ø 0.25191125025-inø 0.313191125031-inø 0.375191125038-inø 0.438191125044-inø 0.5191125050-inø 0.563191125056-inø 0.625191125063-in
inchmmER 32ø 4-20191032000ø 3191032030ø 4191032040ø 5191032050ø 6191032060ø 7191032070ø 8191032080ø 9191032090ø 10191032100ø 11191032110ø 12191032120ø 13191032130ø 14191032140ø 15191032150ø 16191032160ø 17191032170ø 18191032180ø 19191032190ø 20191032200
ø 0.25-0.75191132001ø 0.25191132025-inø 0.313191132031-inø 0.375191132038-inø 0.438191132044-inø 0.5191132050-inø 0.563191132056-inø 0.625191132063-inø 0.688191132069-inø 0.75191132075-in
Collets DIN 6499D (ER/ESX) - sealed, for IC
inchmmER 40ø 6191040060ø 8191040080ø 10191040100ø 12191040120ø 14191040140ø 16191040160ø 18191040180ø 20191040200ø 22191040220ø 25191040250
ø 0.25191140025-inø 0.313191140031-inø 0.375191140038-inø 0.438191140044-inø 0.5191140050-inø 0.563191140056-inø 0.625191140063-inø 0.688191140069-inø 0.75191140075-inø 0.875191140088-inø 1191140100-in
63© WTO GmbH * Subject to change without notice * www.wto.de
Accessories - Collets
-
03
I 2
02
1 e
n
| AustraliaDimac Tooling [email protected]
| BelarusLLC “PMI Engineering”[email protected]
| CanadaMittmann Industrial [email protected]
| ChinaShanghai [email protected]
| Czech RepublicALBA precision, spol. [email protected]
| FinlandSuomen Terätuonti [email protected]
| FrancePhilippe [email protected]
| Great BritainCutwel [email protected]
| IndiaUlhas [email protected]
| IsraelE.Y.A.R. [email protected]
| ItalyPrymark [email protected]
| JapanNK Works Co. [email protected]
| KoreaWTO Office [email protected]
| MexicoWorkholding Engineering De Mé[email protected]
| NetherlandsToologic BeNeLux [email protected]
| NorwayHelge Karlsen Verktøy og Maskin [email protected]
| PolandARCO Andrzej [email protected]
| RomaniaSC Elif Trading [email protected]
| RussiaWTO Office [email protected]
| SlovakiaALBA precision [email protected]
| SpainITALMATIC, [email protected]
| SwedenBonthron & Ewing [email protected] | SwitzerlandUtilis [email protected]
| TaiwanKaiko Co., [email protected]
| TurkeyMYK CNC MAKINA SAN. [email protected]
| Ukraine„LLC“ SPA [email protected]
| USAWTO USAwww.wto-usa.com
| GermanyWTO Headquarterswww.wto-tools.com | China
WTO Asiawww.wto-asia.com
WTO Werkzeug- Einrichtungen GmbHAuf der oberen Au 4577797 OhlsbachGermany
WTO Inc.13900-F South Lakes Dr.Charlotte, NC 28273USA
WTO AsiaRoom 109-110, Building 2No. 228 Banting RoadJiuting Town, Songjiang District201615 ShanghaiChina
WTO worldwide
Our distribution partners. Competence right there.
