Public Address ProductsMicrophones AmpIfiers

Mcrophones Mxers Conference Systems

TOA Electronics Europe GmbH

sound wifhouf compromiseT’

Speakers

Wireless

Mobie Amplifiers

Megaphones

TOA Electronics Europe GmbH

WhyTOA?

Because TOA Europe develops, manufactures and marketsone of the finest ranges of audio and security productsavailable today - woridwide.

The company, with over 70 years experience, offers anextensive choice of audio equipment inciuding amplifiers,speakers, mixers, wireless microphone systems, digitalprocessors and network audio. Also available are securitysystems that include voice over lP for use in security andcommunication applications.

A range of products that caters for all - from small enterpriseto multi-national.

Although already acclaimed leaders in design of soundequipment, TOA does not sit on its laurels. We are constantlyresearching, evaluating, developing and producingground-breaking new ideas that keep us ahead.

re d tfwe are a er agreeble cop,to deal with and that our back-up service is second tonone - much appreciated compliments.

For versatility, durability, sound quality and simplicityof use - get TOA into your systemBased on the letter T; the TOA logo symbolises our four corporate objectives:

Progressive: To continously incorperate the larest technology & pursue a highdegree of specialisation.

dern: To respond appropriately & quickly

to rapid changes occu ring in society.

International: To make a global contribution in the

field of communication through

sound.

Dynamic: To make an effort as individuals to

create products of the highest

quality & value.

For information on TOA Professional Audio Equipment

or Voice Alarm Equipment, visit wwwtoa.eu or contact

your TOA representative.

d TOA

Human society withSound Communication

DIRECTORY

Microphones for Speech and VocalHand-held Microphones

Microphones for Paging UseHand-held Microphones, Desk-top Microphones, Microphone Preamplifiers

Microphone AccessoriesGoosenecks, Desk Stands, Floor Stands

Wireless SystemsUHF Band, Portable Amplifier, VHF Band, Infrared System

Sound Repeater

Mixer Amplifiers / Power AmplifiersPackaged Amplifiers, System Management Amplifiers,Digital Amplifiers, Mobile Amplifiers

Digital Matrix Mixer

Ceiling SpeakersFlush Mount, Fire Dome, Surface Mount Speaker

Box SpeakersUniversal Speakers, Box Speakers for wall Mounting, Accessories

Wide Range and Column SpeakersPendant Speakers, Projection Speakers for Indoor Use andfor Dutdoor Use, Column Speakers

Horn SpeakersHorn Speakers, Paging Horn Speakers, Drivers, Reflex Horns, Accessories

Impedance Meter

Foreground Music SpeakersHarmonized Engineering Speakers, wide-Dispersion Flush MountCeiling Speakers, Accessories

High Quality Sound SpeakersFashion Speakers for Foreground Music, Coaxial Array Speakers,Compact Array Speakers, Line Arrays, Mounting Brackets, Accessories

Conference Systemslnfrared Conference Systems, Wired Conference System

MegaphonesHand-held Megaphones, Shoulder Type Megaphones

Technical ColumnKnow how: Microphones, Amplifiers, Speakers

Application ExamplesSupermarket, Factory, Office, Gymnasium, Pub, Church

Index

d TOA

gTOA.4

4

6

7

8

15

16

23

25

27

29

32

36

37

40

48

55

57

59

62R0HSM CECorn pliant

Microphones for Speech and Vocal

DM Series Microphones

DM-1 100Standard Dynamic Microphone

DM-1 200 / DM-1 200DMicrophone for Speech

DM-1 500Microphone for Vocal

i3z.

W5/16”

iJz. ===.

E

iW5/1 6’

LZZzE=

• Dynamic hand-heldmicrophone for general useapplications• Rigid diecast aluminummicrophone body• Switching and handling noisesuppression• Fitted with 7.5 m phone plugcable• Microphone holder providedas standard accessory

suppression• DM-1200:10 m phone plugcable supplied with unit• DM-1 200D: 5 m DIN-plug cablewith remote control function toactivate amplifiers power or achime for PA systems• Microphone holder provided asstandard accessory• Balanced output for longdistance connection

use applications• Rigid diecast zincmicrophone body• Switching and handlingnoise suppression• 10 m phone plug cablesupplied with unit• Microphone holder providedas standard accessory• Balanced output for longdistance connection

• Suitable for vocal andspeech application• Robust die-cast zincmicrophone body• Short type slide OnIOffswitch reduces handling noise• XLR-connector (balanced)and 10 m cable with phoneplug• Adapter for stand mount isprovided

Model DM-1100 DM-1200/D DM-1300 DM-1500

jyp Moving-coil microphone Dynamic Microphone

Directivity cardioid cardiold Cardioid cardioid

Rated Impedance 6000 unbalanced 6000 balanced 6000 balanced 6000 balanced

Rated Sensitivity -55 dB -55 dB -54 dB -56 dB

Freguency Response 100-12,000 Hz 50-1 2,000Hz 70 -1 ,000 Hz 70- 15,000Hz

Talk Switch ON/OFF switch ON/OFF switch ON/OFF switch ON/OFF switch

Dimensions Ø55x 178 mm Ø39.5x 163 mm 051 x 170 mm 040.5 x 173 mm

Weight 155g (without cable) 265 g (without cable) 245 g (without cable) 280 g (without cable)

Standard Accessory 7.5 m cable, phone plug lOm cable, phone plug 5 m cable, DIN plug lOm cable, phone plug

Mic Holder lW5/1 6”) Mic Holder (W5/1 6”) Mic Holder (W5/1 6”) Mic Holder (W5/1 6”)

5m DIN plug (DM1200/0)

4

TOA(0 dB=1 V/ Pa)

DM-1 300Microphone for Speech /Vocal

• Dynamic hand-held microphone Dynamic hand-heldfor speech use applications microphone for vocal/speech• Rigid diecast zinc microphonebody• Switching and handling noise

Gooseneck MicrophonesDM-524SGooseneck Microphonewith built-in On/Offswitch

Flexible goosenecksFor lecture desk or for pagingSuppresses handling noiseDM-524S has a built-in On/Off switch600 0 impedance (balanced)3-pin connectorMicrophone can be used in conjunction withST-73 Stand

Wired Microphones

ST-73ADesk Stand forDM-5 248 / DM-5245

932129

DM-524B

• 3-pin receptacle• Height 58.5 mm

EM-410Lavaliere Microphone

EM-600Boundary Microphone

EM-700Boundary Microphone

EM-800Gooseneck Microphone

• Clean & accurate reproductionof voice and maximumintelligibility• Compact electret condenserelement with hyper cardioid pickup pattern and good off-axisrejection to minimise feedback• Provides the best performance when attached to thechest such as a shirt front•Minimises noise pickup fromclothes rustling & cables• Colour: Black

Model EM-410

1•• Unobtrusive design forflush-mounting• Omnidirectional pickuppattern• Rubber isolation rings to resistvibrations which also affectaudio quality• Minimal low frequency soundpick up that degrades audioperformance• Colour White

• High sound quality for soundreinforcement, professionalrecording, conferencing• Frequency response extendsover the full range of audiblesound & ensures accuratereproduction• Low-cut filter switch• Small diameter mic capsulepositioned close to the michousing boundary to minimisephase interference

• Electret condenser elementwith cardioid pickup pattern andgood off-axis rejection tominimise feedback• Wide Frequency range• New gooseneck design withtwo adjustment points forflexible mic setting angles• Colour Black• Accessories:ST-800 stand

DM-524BGooseneck Microphone

1 23

0165

Model DM-524B DM-5245

Type Dynamic microphone Dynamic microphoneDirectivity cardioid cardioidRated Impedance 6000 balanced 6000 balancedRated Sensitivity” -56 dB -56 dBFreguency Response 100-10,000 Hz 100-10,000 HzTalk Switch — ON/OFF switchDimensions 040 x 532 mm 040 x 557 mmWeight 465 g 475 gStandard Accessory 3-pin connector 021 3-pin connector o21

DM-524S

“(0 dB=1 vi Pa)

EM-600 EM-700 EM-800

Type Electret condenser Electret condenser Electret condenser Electret condenserDirectivity Hypercardioid Omnidirectional Cardioid CardioidRated Impedance 1200 balanced 1200 balanced 1200 balanced 1200 balancedRated Sensitivity” -47dB -36 dB -33 dB -35 dBFreguency Response 100-15,000 Hz 30- 20,000 Hz 35 - 20,000Hz 60 -20,000 HzCable Length 5.Om — 7.5mDimensions 08.9x28.6mm 028 x68mm 83x23x83mm 012 x42OmmWeight lOOg 85g 290g l3SgStandard Accessory Windscreen xl, Clip Holder xl Rubber isolation ring x2 - windscreen xl

M20 Nut xl

g TOA5

Microphones for Paging Use

Hand-held Microphones

PM-222Uni-directional Paging Microphone

t

• max2m

• Cost effective paging microphone• Hand-held type with push-to-talk switch with lock• Coiled 1-core shielded cable, 2 m long with phone plug

33

r

____—

.2.5mw

• General-use paging microphone with heavy-dutymetallic body. Effective in high ambient noise areas

• Hand-held type with push-to-talk switch with lock• Coiled 1 -core shielded cable, 2.5 m long with phone plug

Model PM-222 PM-120

Type Dynamic microphone (moving-coil microphone)Direct ivity Unidirectional UnidirectionalRated Impedance 6000, unbalanced 2500, unbalancedRated Sensitivity” -47 dB —

Freguency Response 100-10,000 Hz 50-12,000 Hz

Cables Coiled, 1-core shielded cable Coiled, 1-core 5hielded cable

Talk Switch Push-to-talk switch with lock Push-to-talk switch with lock

Dimensions (W x H x D) 44 x 160 x 38 mm 46 x 157 x 33 mmFinish ABS resin, gray Champagne gold (front), black button

çJqht 200g 230gMicrophone Hanger Standard accessory Optional (model 2202)

Desktop Type Microphones

PM-660Paging Microphonewith Phone Jack

PM-660DPaging Microphonewith DIN-Connector

1•’

___ ____Phoneug

-1OO 4—150---I

PM-660UPaging Microphonewithout plug

1DIN Plug

-1OO- 15O—2 5r

EC-1 OOMChime Microphone

• Large talk switch with locking lever

PM-660• Fitted with 2.5 m, 1-core shielded

cable• Phonejack

PM-660U

PM-660D• Extra switch contact for remote control• Fitted with 2.5 m, 2-core shielded

cable and DIN plug

• Built-in 4-tone electronic chime unit• 2 batteries (AA-type) required• 2 m phone plug to phone plug cable

supplied with unit• 2 Push-buttons

2 m cable without plug

Model PM-660 PM-660D PM-660U EC-100M

Rated Impedance 6000, unbalanced 6000, balanced 6000, balanced 6000, unbalanced

(Sensitivity 0 dB=1 V / Pa) -58 dB -58 dB -58 dB Microphone: -53 dBChime signal: -45 dBV

Freguency Response 100-1 0,000Hz 100-10,000 Hz 100-10,000 Hz —

Talk Switch Push-to-talk switch type (short-off circuit, with lock lever) Push ON - Push 0FF

Remote Control — Make contact - —

(interlocked with talk switch)Power Reguirements — — - DC 3V (AA battery x2 pcs)

Finish Head: Zinc plated steel wlre, baked painting, gray / Body: ABS resiri, grey Metallic gold (stand base)

Dimension )WxHxD) 100x215x 150mm 100x215x 150mm lOOx2l5xlSOmm 112x313x l5Omm

Weight 440 g 440 g 440 g 7709

6

TOA

(0 dB=1 V/ Pa)

PM-120Uni-directional Paging Microphone

Amplifier Control Unit for Long Distance Connection

/DCIN

Dclx224V

12V

Microphone Stands

Desk Stands

ST-65AHeight 120 175 mmClip type microphoneholder (W5/1 6” thread)

ST-66AHeight 220-347 mmClip type microphoneholder (W5/1 6”thread) 1

Floor Stands

ST-321 BHeight 101 -172 cmwith boom3/8” and 5/1 6” Adaptor

ST-322BHeight 94- 161 cm3/8”and 5/1 6” Adaptor

ITOA

ST-506Length 150 mm5/16” thread

ST-507Length 300 mm5/16” thread

YM-121Length 367 mmFlexible Shaft for ST-73A3-pin receptacleInput receptacle XLR-3-1 1 C

II

7

RU-2001Amplifier Control Unit for microphones with DIN plug(e.g. PM-660D, DM-1200D)

• 124

hUx

RU-2002Amplifier Control Unit with Chime Signal for microphones withDIN plug (eg. PM-660D, DM-1200D)

124

Model RU-2001 RU-2002

Power Reguirements 12-24V DCCurrent Consumption 60 mAMic. Input -62 dBV, 6000, unbalancedOutput 0 dBV, 6000, balancedSignal - 4-tone / 2-tone / single tone chime or

gang sound (selectable)Dimensions (W x H x D) 124 x 42.5 x 159 mmWeight 700 gFinish Steel color plate, black

DINPIVg

Remote MicrophonoPM-660D

Audio Signal (Twin Core Shielded)

Aux Input

PreamplifierRU-2001/2002

(+optional Power Supply Unit AD-246)

Max Cablo Length 1km

A-2000

AD-246Power Supply

66xQ

Goosenecks

Connectors

XLR Connectors

XLR-3-3 1

Female (F)

XLR-3-1 1 C

Male (M(

XLR-3-1 2C

XLR-3-1 3Panel Jack, round

XLR-3-32 DIN Connectors

Panel Jack, rectangular Panel Jack, rectangular

XLR-3-1 4Panel iack, round

Phone Plugs

5 P DIN Plug 8P DIN Plug Phone Plug Phone Plug(Unbalanced( (Balanced)

Wireless Systems

UHF-Band

UHF system with low noise interference• Triple squelch and diversity system supports a dear reception• Good distance coverage from microphone to tuner (up to 1 50m on an open space)• 16 channels or 64 channels selectable• The system is comprised of a microphone and a matching receiver

Hand-held Wireless Microphones Wireless Lavalier Microphones

WM-5225Microphone (Speech & Vocal)16 channel

WM-5270Microphone (Speech &Vocal)64 channel

WM-5265Microphone (Vocal)64 channels

YP-M5300Undirectional LavalierMicrophone

YP-M531 0Omni-directional LavalierMicrophone

Wireless Headset Microphones

WM-5325Wireless Transmitter

WM-5325HHeadset Microphone

• Microphones designed for speech and for Vocal applications• 2 kinds of microphone: hand-held or bodypack transmitters

with lavalier microphone• Streamlined, thinner profile compared to conventionalmodels, thanks to a new built-in antenna• Wide-area recept) vity

• At-a-glance indicator warns of low battery status• Average operation exceeding 10 hours• Weight reduced• Headset types and units optimized for aerobics applications• PLL-synthesized circuitry oscillation enhances carrier frequency

stability and reliability

Microphones for vocal applications feature• Flat frequency response• Dynamic cardioid capsules• High input levels without overloading

Microphones for speech applications feature• Optimized on intelligibility. These microphones employing

electret condenser element for minimized handling noise

WM-5325AAerobic Set

Model WM-5225 WM-5270 WM-5265

Microphone capsule Electret condenser, Undirectional Dynamic, cardiold Dynamic, cardiold, UndirectionalFreguency Range 376- 865 MHz 794- 865 MHz 576- 865 MHzNo. of dhannels 64 64 64Battery AA (LR6) orWB-2000 (Ni-MH) AA (LR6) AA (LR6I orWB-2000 (Ni-MH)Battery LifeTime >10 h >10 h >10 hIndicators On, battery status On, battery status On, battery StatusAntenna Integrated Integrated Herical AntennaOperatingTemperature -1oc...soc -1o’c...so’c -ioc...so’c

Finish Resin, rubber coating Resin, rubber coating Resin, rubber coatingDimensions 1W x H x Dl 043.6 x 231.5 mm 048 x 244 mm 050 x 229 mmWeight 1809 (mcl. battery) 3409 ( mcl. battery) 2059 1 mcl. battery)Accessories Stand adaptor, storage case Pouch, microphone holder Pouch, stand adaptor, storage case

Model WM-5325 WM-5325A1WM-5325H Model YP-M5300 YP-M5310

Microphone capsule - Electret condenser, cardiold Microphone Element Electret condenser microphone

Freciuencv Ranae 576- 865 MHz 576- 865 MHzNo. of dhannels 64 64Battery AA ILR6) or WB-2000 (Ni-MH) AA ILR6) orWB-2000 (Ni-MH)Battery Life Time >10 h >10 hlndicator5 0n, battery 5tatus On, battery statusAntenna Integrated IntegratedOperatingTemperature -1oc...5o’c -1o,c...so’cFinish Resin coating Resin coatingDimensions (Wx H x Dl 62 x 102.5 x 23 mm 62 x 102.5 x 23 mmWeight 90g 1 mcl. battery) 909 1 mcl. battery)Accessories Screw driver, storage case, Waist pouch (WM-5320A)

0 ‘9mm Pluci

8

Freguency Response 100Hz - 12000Hz 100Hz - 1500Hz

Sensitivity -63 dB 64 dB

Max. Input Level 120 dB SPL 1 10 dB SPL

cable Length 1.3 mFinish Dark BlackWeight 20 g llnc. cord)

d TOA

Wireless Tuner

• UHF system which ensures low noise interference• Triple Squelch and Diversity System supports a dear reception• Good distance coverage from microphone to tuner (up to 1 50m

on an open space)• 16/64channels• Mixing input allows cascading of several receivers (WT-581 0)• Two built-in antennas (WT-5810)• Matching with WM-5220 / 5320 / 5320A / 5320H / 5270

and WM-421 0 microphones• WT-4820 rack mountable with optional mount brackets: MB-WT3

(for one WT-4820) or MB-WT4 (for two WT-4820 side by side)• WT-4820 accepts two optional wireless tuner modules WTU-4800

Model WT-5800 WT-5805 WT-5810 WT-4820 WTU-4800

Power Supply - 230V 50 Hz (AC adaptor) 230V 50 Hz (AC adaptor) 230V 50 l-lz (AC adaptor) 12- 18V DC 7-12V DCCurrent Consumption 250 mA (12V DC) 200 mA (12V DC) 130 mA (12V DC) 250 mA (12V DC) 100 mAReceiving Freguency 682- 865 MHz 682- 865 MHz 682- 865 MHz 690- 870 MHz 794- 830 MH2No. of Channels 64 64 16 16 16lndicators 5 5 4 3 -

DynamicRange >110dB >110dB >104dB >102dB >80dBDistortion <1% <1% <1% <1% <1%Freguency Response 100- 15,000 Hz, ±3 dB 100- 1S,000 Hz, ±3 dB 100- 15,000 Hz, ±3 dB 50- 18,000 Hz, ±3dB 100-12,000 Hz, ±3 dB

Qprating Temperature -10’C ... 50’C -1 O’C ... 50’C -1 O’C ... 50’C -10’C ... 50’C -10’C ... 50’CFinish ABS resin, black ABS resin, black ABS resin, black ABS resin, black Steel caseDimensions)wxHxD) 210x44x205.1 mm 210x44x205.1 mm 206x40.6x152.7mm 210x44x 181 mm 60x25x 139mmWeight 7009 7009 590g 770g 1309

Accessories

YW-4500UHF Wireless AntennaActive antenna with attenuation switch, forwali-mounting

WD-4800Power Antenna Distributor2 antenna inputs, 4 antenna outputs and 4 DC power outputs. The antennaoutputs are distributed to the tuner for maximum coverage area and effectivedear sound. Rack mountable with optional mount brackets (MB-1 5B)

MB-WT3: 19”-Rack-mount Bracket Kitfor 1 WT-4800, consists of 2 brackets,blank box and Connector

r+YMB-WT4: Rack-mount Bracket Kit for 2WT-4800, consists of 2 brackets and con-nector

1TOA

MB-1 5B: Rack-mount Bracketfor WD-4800

9

WT-5800True DiversityTuner64 channels

WT-5805Space DiversityTuner64 channels

liii., 111111 - —

- — —

WT-581 0Portable Tuner

WT-4820Diversity Tunerfor 2 UHF Modules

WTU-4800Tuner Module forWA-1 822, WT-4820,ER-2930W and MX-628

Wireless Microphone Sets

UHF 5000 SeriesMicrophone /Tuner Sets

WS-5200Wireless Set(WM-5220 and WT-5810)

WS-5300Wireless Set(WM-5320 and WT-5810)

WS-5 300HWireless Set(WM-5320H and WT-5810)

WA-1 822 /WA-1822CMeeting amplifier with (WA-1 822C) and without (WA-1 822) cassette driveBoth with speaker and two optional wireless microphone channels

• deal for mobile PA: Portable amplifierfor schools, conferences, entertainment, etc.

• Selectable source: AC or battery operation• Battery status indication• Rated power 20 W and 2-way speaker• Operation with wireless microphones with up to two optional

tuner modules WTU-4800 (UHF) orWTU-3800 (VHF)• 2 built-in antennas

10

1TOA

Applicable Room Size

Class roomConference roomOutdoor

8 x 14 m8x lOm15 x 15 m

Portable Amplifier

r 200

Model WA-1 822 / 1 822C

Power Supply 230 V—, 50 Hz or dry celI: 8 xRated Power AC: 20W; Battery: 8WPower Consumption 44W (rated output)Freguency Response 70.10,000HzDistortion < 1%lnputs 1 wired MIC: -48 dBV, 6000, AUX: -20 dBV, 10 kO

Speaker 20cm Bass + Horn or external: 8- 160 min. 20W

S/N Ratio > 70 dBOperating Temperature -10- 50CDimensions (W x H x Dl 2980 460 x 200 mmWeight 6kgFinish White

Aoolication Room size

Church lOxl5mGymnasium 15 x 15 m

WTU-3800Tuner Module for WA-1 822/C

• Double squelch and diversity system supports a dearreception

• Good distance coverage from microphone to tuner (within1 50m at an open space)

• 6channels• Mixing input allows cascading of several receivers (WT

3810)• Two built-in antennas (WT-3810)• Audio mixing input (WT-3800)• Applicable microphonesWM-3210/ WM-3220/ WM

3310/ WM-3310H

Model WT-3800 WT-3810 WTu-3800

Power Supply 230V, 50Hz (AC Adaptor) 230V, 50Hz (AC Adaptor) 7-12V DCCurrent Consumption 150 mA (13.8V DC) 150 mA (13.8V DC) 100 mAReceiving Freguency 169- 216 MHz 169- 216 MHz 169-216 MHzNo.ofChannels 6 6 6Indicators 3 3 -

DynamicRange >100dB >100dB >80dBDistortion <1% <1% < 1%Freguency Response 100- 12,000 Hz, ±3 dB 100- 12,000 Hz, ±3 dB 100- 12,000 Hz, ±3dBOperatingTemperature -10’C...50C -10C...50’C -10C...50’CFinish ABS resin, black ABS resin, black SteelDimensions(WxHxD) 210x44.2x 181 mm 240x35x 110 mm 60x25 x 139 mmWeight 6009 3809 130g

Wireless Microphones

WM-3210Microphone (Speech & Vocal)

WM-3220Microphone (Speech)

WM-331 0Lavaliere Microphone

WM-3310HHeadset Microphone

Model WM-3210 wM-3220 wM-331o WM-3310H

Microphone Dynamic Cardioid Electret Condenser, Cardioid Electret Condenser, Cardioid Electret Condenser, CardioldFreguencyResponse 169-216MHz 169-216MHz 169-216MHz 169-216MHzNo of Channels 6 6 6 6Battery 9V (6LR61) 9V (6LR61) 9V (6LR61) 9V (6LR61)BatteryLifeTime >10h >lOh >lOh >lOhIndicators 0fl, battery Status On, battery status On, battery status 0fl, battery statusAntenna Integrated lntegrated Herical antenna Herical antennaOperatingTemperature -10,C,,,50C -10’C...50C -10C,,,50C -10C...50CFinish ABS resin coated ABS resin coated ABS resin coated ABS resin coatedDimensions 1W x H x D) ø50 x 235.2 mm 045 x 235.2 mm 62 x 142 x 32 mm 62 x 142 x 32 mmWeight 250 g (mcl. battery) 2509 (mcl. battery) 135g 1 mcl. battery) 135 g ( mcl. battery)Accessories Stand adaptor, screwdriver Stand adaptor, screwdriver Screwdriver Screwdriver

Accessories

1v

YW-3500VHF Wireless AntennaDipole antenna for wail-mounting, 75 0 output impedance

TOA11

VHF-Band

WT-3800VHF Tuner

WT-381 0Portable VHF Tuner

INFRARED Wireless System

• Secure and interference free transmission

• Good area coverage through different kind of receivers

• No frequency admission necessary

• Simultaneous use with TOA infrared conference systemsTS-8OO/TS-OO possible

lnfrared Wireless Microphones

IR-200MMicrophone (Speech & Vocal)

IR-3 OOMBodyTransmitter Microphone

til

• Stable Voice transmission• Intelligent positioning of the emitter aVoids drop-outs through users handling

• Electret condenser microphone unit

• Lightweight• lnfrared light emission adjustable• 2 channels• Antibacterial treatment• Low battery indicator

• Ready-to-wear design with neck strap• Intelligent positioning of the emitter avoids drop-outs through user’s handling

• Built-in electret condenser microphone• Connection of optional external microphone possible

• lnfrared light emission adjustable• 2channels• Antibacterial treatment• Low batttery indicator

Model IR-200M IR-300M

Current Consumption Battery Typ. 250 mA 12.4V, Power selector awitch: N) / typ. 340 mA (2.4 V, Power selector switch: H)Bastery IR-200BT-2 rechargeable battery for the infrared wireless microphone (2 pieces) or AA alkaline dry celi battery (2 pieces)lnfrared Emitter

Wavelength 870 nm (AM: Brightness modulation)Modulation Method Frequency modulationCarrier Frequency Channel A: 3.100 MHz/Channei 8: 3.350 MHzTransmission Distance Appros. 20 m (Power selector switch: H; In an unobatructed space.(/Approx. 15 m (Power selector switch: N; In an unobstructed space.)

Tone Signal 32.768 kHzModulation Sensitivity ±4.8 kHz (1 kHz, when SPL of 84dB is input)Maximum Input sound Pressure 120dB SPLInput Sensitivity Adjustn,ent — Adjuatment range: -9dB to 0 dB (factory-preset: 0 dB(Microphone unit unidirectional electret condenser microphoneFrequency Response 100Hz — 12 kHzPreemphasis 300 painput — External microphone input (o3.5 monaural mini jack(Battery Operation Time Approx. 8 hours (when the IR-200BT-2 rechargeable battery for the infrared wireless microphone is used; Power selector switch: N) /

Approx. 6 hours (when the alkaline battery is used; Power selector switch: N(Operating Temperature 0C to +40CÖfating Humidity 30% to 85% RHrinish Control Section: ABS resin, metallic gray, 50% giosa, paint / Filter Section: Polycarbonate, optïcal cut filterDimensions e37 x 241.8 mm 64 (W( x 91.3 1H) x 27.3 (Dl mm

Wïht 170 g (with batteries) 130 g (with batteries & strap)

Options for microphones

Tuner / Distributor

lR-7O2Tlnfrared Wireless Tuner

• Built-in 2-channel fixed-frequency tuner

• Up to 4 infrared light receiVers per unit• Equipped with signal reception light and knob for microphone Volume control

• Two line outputs, one with a MIX output switch allowing output of mixed voices from

channels A and B• Rack-mountable with optional brackets (MB-WT3/MB-WT4)

PA TOA

YP-M1O1 YP-M3O1 IR-200BClie Clip Microphone Headset Microphone Battery Charger

1 R-200BT-2Ni-MH Battery2 pcs./ rechargeable

12

lnfrared Wireless Classroom System

• Uniform classroom-wide sound quality with singlewide-dispersion speaker• Electret condenser microphone unit

• Quick, easy installation requiring just one CAT-5cable• TOA lightweight, low fatigue infrared wirelessmicrophones

Assembled specifically for classroom use,TOA’s newinfrared Wireless Classroom System includes a ceilingmounted wide-dispersion speaker (with integratedreceiver and amplifier), an easyily accessed desktoptuner and a pair of lightweight IR wirelessmicrophones, one each for the teacher and students.

The wide-dispersion speaker provides ample 100m2coverage, transmitting teachers’ and students’normal speaking voices to everyone in the room,from front to back, with equal clarity and TOA’srenowned superior sound quality.

IR-820SPlnfrared Wireless Speaker

• Built-in infrared receiver and 20W digital amplifier• Unique wide-dispersion acoustic structure employinginnovative TOA technology to achieve uniform output over awide radius• Bass-reflex speaker system achieving a wide frequencyrange and high power-handling capabiliy• Easy installation with quick, optimally positioned ceilingmounting

1 R-802Tlnfrared WirelessTuner

• 3 AUX inputs for PC, TV/DVD player and MP3 audio player• Output muting by 25V line signal from telephone paging• Equalizer control knobs for low-, mid- and high-frequencyoutputs• Mixing output terminal for ALD (Assertive Listening Device)• Frequency response optimized to reduce acoustic feedbackin 30 ft x 30 ft classrooms

1 R-300M IR-200M IR-200BC IR-200BT-2RodyTransmitter Microphone Microphone (Speech &Vocal) Battery Charger Nl-MH Battery (2 pcs./ rechargeable)

Model IR-8205P lnfrared Wireless Speaker

Power Source 24V DC (supplied from 1R802T)Power Consumption 4.4W (based on UL 5tandard)rreguency Response 100Hz - 20,000HzReception Angle 360 (Horizontal)Connection Cable CAT-5 UTP

Model IR-820SP lnfrared Wireless Speaker

Power Source 120V AC 50/60 HzPower Consumption 8W (based on IJL standard)Receiving Freguency Channel A: 3.100 MHz Channel B 3.350 MHzReceiver Sensitivity 50 dB or moreTone Sguelch Freguency 32.768 kHZ

. ., o”,y -- --

Operating Humidity 90% RH or less (rated output, A-weighted) Operating Humidity 90% RH or less (no condensation)Dimensions ei 2.6 x 8.07 (D) Dimensions 08.27’ (W) x 1.81” (H) x 12.28’ CD)Weight 7.5 Ib Weight 3.97 IbAccessories Safety wire xl, Ceiling reinforcement ring xl, Accessories AC adapter (DC cord length:5.9ft) xl, 1, AC power

Paper pattern xl cord (6.56 ft) xl, Volume control cover x6,Option 111e bar bridge Option Half-width blank panel: MR-158-BK

i..iJ

Ooeratina T’’”’’ ‘“ 1 4F to 1 22F 1 4F to 1 22F

TOA13

1 R-700D

• Equipped with 4 receiver mixing outputs and 2 distribution outputs• By using the IR-700D in conjunction with IR-702T and YW-1022/1 024, a system with up

to 16 infrared receivers is configurable• Rack-mountable with optional brackets (MB-WT3/MB-WT4)

Model IR-700D

Power Source AC mains 50/60Hz (supplied from theaccessory AC adaptor)

Power Consumption 25W or Iess

Input/Output 4 mixing inputs, 2 distribution outputs

Band-Pass Freguency 3.0 — 6.0MHz

Gain 0 dB (±3dB)lnfrared Receiver Input 75 Ohm, BNC jack x 4 (Irifrared wireless

receiver’s power source: 24V DC,800mA max. in total of 4 terminals)

Distribution Output 75 Ohm, BNCjackOperating Temperature -1 O’C to +50C

Operating Humidity 30% to 85% RHFinish Case: ABS resin, blackDimensions 210 (W) x 44 (H) x 200.9 (D)mmWeïght 640g (unit only)

IR-500RWall-mount Receiver

lR-5 lORCeiling-mount Receiver

lR-520RWall-mount Receiver

• With wali-mountingbracket

• Installation in electriccircuit box possible

• Power indicator LED• Reception area

approx. lSm• Adjustable reception

angle

• Wall or stand mount• With ceiling moun

ting bracket• Power indicator LED• Reception radius

approx. 8 m

• Wall or stand mount• With stand mounting

bracket• Power indicator LED• Reception area

approx. 15 m

4-,’--MB-WT3: 19”-Rack-mount BracketKit for 1 lR-702T/700D consists of 2brackets, blank box and connector

14

MB-WT4: Rack-mount BracketKit for 2 IR-702T/700D, consistsof 2 brackets and connector

1TOA

YW-1 022Distributor1 into 2 outputs

YW-1 024Distributor1 into 4 outputs,

lnfrared Wireless Distributor

Model IR-702T

Power Source AC mains 50/60Hz (from the accessory AC adaptor)

Power Consumption 15W or lessReceiving Freguency Channel A: 3.100 MHz / Channel B: 3.350 MHz

Receiver Sensitivity S/N ratio over 50 dB (40 dB1iV input,

1 kHz modulation, ±4.8 kHz deviation)S/N Ratio >61 dB (60 dBiV input, ±4.8 kHz deviation, A-weighted)

Tone Sguelch Freguency 32.768 kHzlnfrared Receiver Input 75 Ohm, BNC jack x 2 (lnfrared wireless receiver’s power

source: 24V DC, max. 220mA in total of 2 terminals)

Output Channel A and B: —10 dB (±4.8 kHz deviation, vol; max.)600 Ohm 3 pole phone jack

Freguency Response 100Hz — 12 kHz

Operating Temperature -1 0C to +50COperating Humidity 30% to 85% RH

Finish Case: ABS resin, black

Dimensions 210 (W) x 44 1H) x 210.9 (D) mm

Weight 630 g (unit only)

Receiver

Model IR-500R IR-510R IR-520R

Power Source 24V DC (supplied from the optional IR-702T(

Current Consumption Max. 40 mA Max. 60 mA Max. 30 mA

lnfrared DetectorWavelength 870 nmCarrier Frecuency Channel A: 3.100 MHz/Channel B: 3.350MHz

Reception Area Approx. 15 m Practical radius of approx. 8 m Approx. 15 m

Reception Angle Vertical: 80 (up to 30 movable downward) — —

Horizontal: 80 (up to 30 movable left or right)

Conriection Terminal 75 Ohm, BNCjack

Operating Temperature O’C to +40C

Operating Humidity 30% to 85% RH

Finish Case: Polycarbonate resin, Case: Polycarbonate resin, Case: Polycarbonate resin,

visible light cut filter visible light cut filter visible light cut filter

Base: ABS resin, off-white Base: ABS resin, black

Dimensions (WxHxD) 70 x 120 x 72 mm 0120 X 71.3 mm 84.5 x 63.5 x 32 mm

Weight 2209 )unit only) 205 g (unit on)y) 100 g (unit only)

Accessories

(fin a space whithout obstacles)

Sound Repeater

Both sound repeaters are featuring digital circuitries. Easy recording of announcements, allowing the user to overwritemistakes until an announcement is perfect. Recording with CD-quality and maintenance-free use. An Automatic GainControl (AGC) is built-in to eliminate differences in recording levels. Punctuating announcements with chimes possible.

EV-20RSound repeater for recording and playback of prerecorded announcements

• For supermarkets and department stores with a distributedspeaker system

• Up to 4 separate message selections or announcementsto a total maximum of three minutes may be recorded

Front panel-mounted recording inputs (mic.!line switchable)• PC connection via USB. A CD Rom with various chimes is

included• Pre-recorded message can be transferred via USB-lnterface.• Built-in interval timer allows messages to be repeated

at various time intervals (0.5 seconds up to co)

• 3W! 80 amplifier section built-in for direct speakerconnection. Volume control for level adjustment of an external source

• A line input and output for connecting various programsources including CD players or dedicated BGM units

PM-2OEVMicrophone with sound repeater for recordingand playback

For locally recorded advertisements• A microphone is included as standard

equipment for recording and makingannouncements

• Built-in monitor speaker allows checkingannouncements before broadcasting

• Automatic chime for marking the start andend of an announcement

• PC connection via USB possible• A CD Rom with various chimes is included• Pre-recorded message can be transferred via

USB-lnterface• Non RoHS product

Model EV-20R PM-2OEV

Power Requirements 24V DC / 400 mA 24V DC / 200 mAor from AD-246 AC adapter or from AD-246 Ac adapter

PowerConsumption 10W 5WFreguency Response 20- 20,000 Hz ±3dB (1 kHz) 50- 20,000 Hz ±3dB (1 kHz)Input Input / recording input: Uni-directional gooseneck microphone /

Mic: -60 dBV, 2.2 ko, Line: -20 dBV, 10 kO external Mic: -37 dBV, 2.2 kO, unbalanced, mini jackunbalanced phonejackLine Input: 0 dBV, 10 kC2, removable terminal blockControl Input 10 mA removable terminal block

Output Line: 0 dBV, 60 f2, unbalanced, removable terminal block Line: 0 dBV, 600f), balanced, phonejack, removable terminal block 7-pHeadphone: 0 dBV, 100f) unbal. phone jack Monitor speaker (built-in): 0.2WSpeaker: 3W, 8f), removable terminal blockControl: removable terminal block

Messages Playback intervals: , Os, 5 S, 105, 30s, Delay: 0,2 or 4 sec.1 / 4 / 10 / 30 min or 1 h (selectable) Recording time: max. 6 min., 1 messageDelay: 0, 2 or 4 sec.Recording time: max. 3 min., max. 4 messages

Dimensions(Wx HxD) 210x44.2x 181 mm 122x48.8x 180 mmWeight 730g 710gFinish ABS resin, black ABS resin, silverAccessories CD-ROM, unbalanced phone plug, USB cable, CD-ROM, unbalanced phone plug cord (2 ml,

removable terminal block 122-pl USB cable, removable terminal block (7-p)Optional: AD-246 adaptor Optional: AD-246 AC adaptorMB-WT3 Rack-mount kit for 1 deviceMB-WT4 Rack-mount kit for 2 devices

Accessories

4jMB-WT3: 19”-Rack-mount BracketKit for 1 IR-702T!700D consists of 2brackets, blank box and connector

MB-WT4: Rack-mount BracketKit for 2 IR-702T!700D, consistsof 2 brackets and connector

1TOA

AD-246Power Supply

15

A-2000 Series Packaged Amplifiers

A-2030 (30W) / A-2060 (60W) / A-21 20 (120W) / A-2240 (240W)

______

% 9Rear:A-2120CE

420

• Cost effective and durable mixer power amplifier• User friendly front panel allows easy operation• 3 electronically balanced microphone inputs,

2 AUX inputs and recording outputMic 1 has DIN plug + mute functionPhantom power at MIC 1lmproved cost-performance level

• Wide tone-control adjustment range of ±10dB forboth bass and treble

• Operation on either 230V AC or 24V DC• 100V /70V line or 40 speaker outputs• Booster amplifier for additional power

2-unit size• Colour: black• Optional rack-mount bracket: MB-25B

240W output power• 100V line input allows connection to speaker output of

A-2000 series amplifiers• Remote power control allows operation independently

from A-2000 series amplifiersEmergency bypass of master volume2 height units

Model A-2030 A-2060 A-2120 A-2240 P-2240

Power Reguirement 220—240 V AC / 24V DC 220-240v AC / 24v DC 220—240 V AC / 24v Dc 220—240 v AC / 24V DC 220—240 V AC / 24V DC

Output 30W rated, max. 45W 60W rated, max. 90W 120W rated, max. 180W 240W rated, max. 360W 240W rated, max. 360W

PowerConsumption 34W 72W 124W 238W 238W

Fguency Response 50- 20,000 Hz, ± 3 dB

Distortion < 1% af 1 kHz, 1/3 rated powerTone Control Bass: ±10 dB at 100 Hz,Treble: ±10dB af 10 kHzS/N Ratio Better than 60 dBSpeaker Output 100V, 70V line, 40Input Mic 1,2,3: -60 dBV, 6000, electronically balanced, Mic 1: S-p DIN, Line In: 0 dBV, screw terminal

Mic 2,3: phonejack Speaker Line In: 40 dBv,

Mute: contact pin 4-5 clo5ure input (for Mic 1) screw terminal

Aux 1,2: -20 dBV, 10 kO, unbalanced, RCA pin jack

Protection Circuit Current limiter, thermal protection, AC and DC fuseMuting Function MIC 1 overrides other input signals with 0—3OdB atterniation —

Finish Front panel: A8S resin, black / Case: Steel plate, black païntDimensions (WxHxD) 420 x 101 x 280 mm 420 x 101 x 280 mm 420 x 101 x 360 mm 420 x 101 x 360 mm 420 x 101 x 360 mm

Weight 5 kg 7 kg 10.8kg 13.2 kg 13.2 kg

16

ITOA

1• I:• ØØc! • •

Connection Example

360 3

P-2240 Booster Amplifier (240 W)

Booster arnplitier SpeakorsP-2248 (240W)

Colour: black

• Optional rack-mount bracket: MB-25B

Mixer Power Amplifiers A-1 800 Series

A-1803(30W)/A-1806(60W)/A-1812(120W)/P-1812(120W)

A-1803 /A-1806/A-1812 P-1 812 (Booster Amplifier)

., -% % .

85

367

3265

[iO ÜDD

©

• Matching the needs for a small PA-system withemergency function, 2 speaker zones and alI-calI

• 3 microphone inputs, 2 AUX-inputs, telephone- andpriority input

• Emergency call even 1f the amplifier is switched off• 3 Priorities: emergency, telephone or paging microphone

(MIC1) with priority overriding• All cali from telephone• Recording output• Speaker outputs with screw terminals• Selectable chimes• Connection of a 120W booster amplifier P-1 812 possible• Optional rack-mount bracket: MB-25B

Connection Example

Cassette Player

Accessories

MB-25BRack-mount Bracket

Model A-1803 A-1806 A-1812 P-1812Power Source 220-240V AC 50/60 Hz, 24V DC (screw terminal)Rated Output 30W 60W 120W 120WDistortion (THD) < 2% at 1 kHzFreguency Response 50— 15,000 Hz 50— 20000Hz (±3 dB)Tone Controls Bass: ±10 dB at 100Hz /Treble: ±10 dB at 10 kHz -Outputs REC 0 dBV, 600 Ohm RCA jacks -

LINE 0 dBV, 600 Ohm, RCA jacks 0 dBV, 6000. RCA jacksSpeaker Selection 2 zone, high impedance, individual selector switch, screw terminal -Direct Out High impedance, screw terminal

Low impedance, 4 Ohm screw terminalInputs MIC 1 —60 dBV, 600 Ohm combination (XLRJPhone), DIN (5P) -

MIC 2-3 —60 dBV, 600 Ohm , combination (XLR/Phone) -AUX 1 (MOH) —20 dBV, 10 kOhm , RCA jacks -

AUX2 —2OdBV,lOkOhm,RCAjacks -AUX 3 —20 dBV, 10 kOhm , combination (XLR/Phone) -

Tel —20 dBV, 10 kOhm , screw terminals -Emergency 0 dBV, 600 Ohm , screw terminals -

Line- 0/-10dBV,lOkO, RCA jacks

Operating Temperature -1 O’C to 40’C -1 0C to 40’CFinish Front Panel: ABS resin, black Case: Black steel plateDimensions (W x H x D) 420 x 107.7 x 367 mm 420 x 107.7 x 367 mmWeight 8.1 kg 9.4kg 12.6kg 12.2kg

TOA17

320

Column Speaker Horn

Speaker

CD

Connection of aPaging Micro- Telephone System

— — _i phone PM-660System Expansion

Microphone Mixing Amplifiers A-1 700 Series

A-1 706 (60W) / A-1 712 (120W) / A-1 724 (240W)

Ij:-

Connection Example

Column Speaker Horn

_______

Tape Recorder (REC OUT)Speaker !‘.!-

SpeakerEqualizer

6 microphone and 5 AUX-inputs offerexcellent flexibility, simultaneous use of 9 inputs possibleAUX 3 and AUX 4 are stereo inputsInput 5 and 6: Switchable mic or line levelAn equalizer may be inserted before the poweramplification stage

• For easy recording each A-1 700 is equipped withREC OUT connectors

• 2 speaker zones can be accessed or ali-cail• Remote control of volume• Remote power-on

MB-25BRack-mount Bracket

sensitivity selectable: Mic / Aux Level

Model A-1706 A-1712 A-1724

Power Source 220-240V AC 50/60Hz

RatedOutput 60W 120W 240W

Distortjon (THO) Less than 2% at 1 kHz

Freguency Response 50— 20,000 Hz (±3 dB)

Tone Controls Bass: ±10 dB at 100 Hz/Treble: ±10dB af 10 kHz

Outputs Speaker High Impedance 100V Line: 83 0, Low Impedance: 40

Recording Outputs 0 dBV, 6000, RCA jacks

Line Outputs 0 dBV, 6000, RCA jacks

Inputs MIC 1 —4 —60 dBV, 6000, electrically balanced, combination (XLR/Phone)

MIC 5_6* —60 dBV, 6000, electrically balanced, combination )XLR/Phone)

AUX 3 —4 —22 dBv, 10 kO, RCA pin jacks (stereo)

AUX 5 —22 dBV, 10 k0, combination IXLR/Phone) (monaural)

Operating Temperature —1 0*C to +40*C

Finish Front Panel: ABS resin, black, hairline; case: Black steel plate

Dimensions (W x H x D) 420 x 107.7 x 367 mmWeight 9.3kg 12.6kg 1 3.5 kg

18

d TOA

420

øOøQOO- *

ô êH U..

-_—--r--—

TT ®C)O. 00

, -- — 1 1 = - - -

L] — -

Cassette Player ]1O oooCD(AUX4) —

©

Cassette Player (AUX 3)_4__ Microphones

Accessories

System Management AmplifIer

VM-2000 SeriesSmall PA System

iTOA VM-2240

:1,,

RM-210

Specifications VM-2000 series Optional Accessoires

• Programmable system managementamplifier

• VM-21 20 (120W) or VM-2240 (240W)• 5 switchable high impedance speaker

zones with adjustable attenuators• 9 units can be combined to increase the

output power and number of zones• 4 input channels come with volume and

bassftreble control on the front panel

• Both BGM inputs with level pre-adjustment

• The routing to the zones of the 3 microphone/line level inputs and the telephone pa-ging input can be pre-set

• Additional features: Emergency powerinput, remote power control, 7 built-inchimes etc.

• 19” rack mountable (3 units, optionalMB-36 brackets required)

• EV-200M: Voice Announcement Boardfor installation in the VM-2000 systemmanagement amplifler’s card receptacle

• Play back of pre-recorded messages as2 for emergency and 5 for commercialpurpose plus 1 individual chime

• Messages are stored on memory cardsof Compact Flash format

• Playback duration depends on the thememory card’s capacity

• The unit checks the availability of themessages and memory card

• SV-200M: Surveillance Board for installation in the VM-2000 system management amplifler’s card receptacle

• Monitoring of 5 speaker lines on shortcircuit, break and earth leakage andpower amplifler on proper operation

• In case of failure, it controls thecommon failure indicators and offersdetailed failure information on separateoutputs

• In case of a short circuit on a certainspeaker line, it cuts this line from theamplifler to avoid affecting other speaker lines

• MB-36: Mounting Brackets for cabinetrack mounting of VM-2000 series ampliflers

• IT-450: Input Transformer, impedance of600 Ohm: 600 Ohm

• SDCF-03: Compactflash Adaptor forrecording the memory cards with theEV-350 or by means of PC software

EV-200 SV-200M

IIMB-36 IT-450

19

RM-200M

VM-2 120 / VM-2240

1TOA

DA-Series Digital Amplifiers

DA-250F (4-channel)! DA-250FH (4-channel, 100V)!

DA-250D (2-channel)! DA-250DH (2-channel, 100V)

-0Jrear view DA-250FH

--i-JIL *:rrear view DA-250D

• Fully digital• Real 1000W R.M.S. power (DA-250F/FH) or

500W R.M.S. power (DA-250D/DH)• Compact size with only 1 unit height• Efficiency of 85% max.• Ideal for fixed installation• 4 different configurations: Low impedance or 70V /

100V application, 2 or 4 channels• Each channel with independent power supply• Control covers eliminate tampering• Low-noise constant speed fans• Stacking possible• Bridged mode for DA-250F/D possible• Protection circuitry• Pulse width modulation with controlled power supply

I r[ ‘i ‘ 2L -i

___

Øza.s.. Ø2.E2.. Øz_D: j482

374401.8

Model DA-250F DA-250FH DA-250D DA-250DH

Power Source 220 - 240V AC, 50/ 60 Hz

Numberofchannels 4 4 2 2

Total Output 1000W (1 kHz, 4 Ohm) 1000W (1 kHz, 40 Ohm) 500W (1 kHz, 4 Qhm) 500W (1 kHz, 40 Ohm)

PowerOutput 4x250W(4Ohm) 4x250W(70V/100V) 2x250W(4Ohm) 2x250w(70V/100V)

4e 170W(8Ohm) 2e 170W(SOhm)

2e 500w 18 Ohm, bridged) 2 x 500W (8 Ohm, bridged)

Powerconsumption 200W 200W 120W 120W

Freguency Response 20Hz ... 20 kHz, ±1dB 50Hz ... 20 kHz, -3dB, +0dB 20Hz ... 20 kHz, ±1dB 50Hz ... 20 kHz, -3dB, +0dB

THD (lkHz(0,1 % 0,1 % 0,1 % 0,1 %

S/NRatio(Aweight) 100dB 100dB 100dB 100dB

Damping Factor 100(1 kHz, 8 Ohm) 300(1 kHz, 40 Ohm) 100(1 kHz, 8 Ohm) 300(1 kHz, 40 Ohm)

Input Impedance 10 kOhm (unbalanced), 20 kOhm (balanced)

connection Inputs: Detachable terminal block (electronically balanced). Outputs: screw terminals (M4). For AWG 1 4-22

Dimensions 482 mmx 44 mm x 401.8 mm (W x H x D, EIA standard rack)

Weight 6.8kg 6.8kg 5.3kg 5.3kg

Finish Front: Aluminum, alumite process, black, case: plated 5teel sheet

all channelsEN 60065

MT-251 HIsolation Transformer

Model MT-251H

capacity 0—250WPrimary impedance 100V line: 40 Ohm (250W), 70V line: 19.6 Ohm (250W)

Secondary impedance 100V line: 40 Ohm (250 W), 70V line: 19.6 Ohm (250 W(,

50V line: 10 Ohm (250 W(, 35V line: 4.9 Ohm (250W)

Freguency response 30 Hz — 18 kHz (+0dB, —3dB)Connection terminal M3 screw terminal, distance between barriers: 6.6 mm

Dimensions 108 (W) x 122 (HI x 80 (D) mm

Weight 2.4kg

20ITOA

DA-250F

1 ? ? 1’ 1

-: --

DA-250D

DA-550F (4-channel) / DA-500FH (4-channel, 100V)High Power Digital Amplifier

Ç - -.

I—-.-.,.-- QJ

_______

- 1

—

1

____________

— J

_=-;--

J

— -

.

L_I_I.J -=

1’ce a

• 2 Versioris: 4 Ohm (DA-550F) or 100V (DA-500FH)• 4 x 500W (DA-500FH) or 4 x 550W (DA-550F) output

power• Class D design 85 % efficiency• Independent power supply for each channel• Light weight and compact• Ideal for professional audio systems which require a reliable

operation• Colour: Black

• Rack mountable with 2 units height• Stack up to 5 units without open spaces between units• Selectable stereo or bridge operation (DA-550F)• Forced-air cooling system• Low heat dissipation• Comprehensive protection circuitry• Removable dust filters for easy maintenance

Fundamental advantages of TOAs Digital Amplifiers

Coriventional Amps

(3Ë:üfflhIoooa

occcoIIIIIIIIIIIIIIIIIIIIIII

cccccIIIIllhIllllhIIIIItItt)

IIllhIflllhIII

cccoa

cccooIIIIIIIIIIIIIIIIII,IIII

Model DA-550F DA-500FHPower Source 230V AC, 50! 60 Hz 230V AC, 50 / 60 HzNumberofChannels 4 4Power Output 4 x 550W (4 Ohm) 4 x 500W ( 70V! 100V)4 x 350W (8 Ohm)2 xl 100W (8 Ohm, bridged)Power Consumption 380W 380WFreguencyResponse 5OHz...2OkHz,±ldB 5OHz...2OkHz,-3dB,+0dBTHD (1kHz) 0,1 % 0,1 %SIN Ratio (A weight) 100 dB 100dBlnput lmpedance 10 kOhm ( electronically balanced)Controls Volume level control (per channel), LEDs : Power, Indicator for each channel: input, output, peak, protectionConnection Input: Detachable terminal block (3 pin5(, XLR-3-31, output: screw terminals (M4)Protection Circuit Overheat, short circuit, overload, unusual DC voltage outputDimensions 482 mmx 88.4 mm x 404.2 mm (W x H x D, EIA standard rack(Weight 9 kgFinish Front: Aluminum, alumite process, black, case: plated steel sheet

TOA21

DA-tOe series

Standard Amplifier

erpI5

y7Amplifler

Car System

CA-1 15 (max. 35W) / CA-1 30 (max. 60W) / CA-1 60 (max. 120W)

144

• Easy installation for 12V battery equipped vehicle• Compact and rugged• Two microphone inputs and convenient auxiliary

for tape recorder, radio, etc. connection• Uni-directional dynamic microphone with talk switch• Matching in DIN size car radio slot

When corinecting one bom speaker

__________

RatedInput/Max SpeakerCA-115 15W/(max.SOW) SC-830

O7 0(55 1When connecting two bom speakers in parallel

Rated Input / Max SpeakerCA-1 15 15W,20W SC-615QCA-130 30W,60W SC-630x2CA-160 60W/120W SC-650x2CA-207 2OWi3OW SC-615x2 SC-630x2

LcA- 4OWIOW SC-650 x 2

CA-1 30 When connecling four bom speakers in sefial-parallel

Model Ratedinput/Maxj5 15Wt35W

[ CA-130 30WI0W

LÇAi 60W/120W

1 CA-207 20W130W

1ççT 40W0W

SpeakerSC-610x4SC-615x4SC-630x4SC-610x4SC-615x4 SC-630x4

______

B1Y

_______ __

:

____________________

1 w-n’ awr/’

Mobile Amplifiers with Cassette Deck

CA-1 07 (max. 15 W) / CA-207 (max. 30W) / CA-407 (max. 60W)

182• Matching in DIN size car radio slot• Built-in auto reverse cassette deck with pause

fu nction

75 • Equipped with muting system

i• Uni-directional dynamic microphone with talk

switch• Non RoHS product

181,5

Model CA-107 CA-207 CA-407

PowerSupply 14VDc 14VDC 14VDC

Current Consumption 1.8 A 3.2 A 5.5 A

Rated Power 10W 20W 40W

Impedance 80 40/80 40/80

. Distortion <5% <5% <5%

Freguency Response 100- 10,000 Hz ±3 dB 100- 10,000Hz ±3 dB 100- 10,000 Hz ±3 dB

Inputs MIC 1,2: -48 dBV, 6000; MIC 1,2: -48 dBV, 6000; MIC 1,2: -48 dBV, 6000

Finish Front: ABS-resin, black; case: Zinc plated steel

Microphone With talk switch, Impedance 6000, Sensitivity —73 dB ±3 dB, cardiold

Dimensions 1W x H x D) 178 x 50 x 181.5 mm 178 x 50e 181.5 mm 178 x 50 x 181.5 mm

Weight 1.3kg 1 .5kg 1.7 kg

22i TOA

178 178

1

________________

ôJ

132

CA-1 15

578

1xL

170

—

CA-160

Model CA-115 CA-130 CA-160

PowerSupply 14VDC 14VDC 14VDC

Current Consumption 2.2 A 4.4 A 9 A

Rated Power 15 W 30W 60W

Impedance 40/80 40/80 40/80

Distortion <5% <5% <5%

Freguency Response 100- 10,000Hz ±3 dB 100- 10,000Hz ±3 dB 100- 10,000Hz ±3 dB

Inputs MIC 1,2: -48 dB1, 6000; MIC 1,2: -48 dBV, 6000; MIC 1,2: -48 dBV, 6000;

Aux: -6 dBV, 10 kO Aux: -6 dBV, 10 k0 Aux: -6 dBV, 10 kO

Finish Front: ABS-resin, black; case: Zinc plated steel

Microphone With talk switch, Impedance 6000, Sensitivity -53 dB ±3 dB, cardioid

Dimensions(WxHxD) 178x50x132mm 178x50x144mm 178x50x170mm

Weight 0.9kg 1.1 kg 1.2kg

Digital Matrix Mixer

M-9000M2

Compact sized 8-Channel Stereo-Mixer with built-in amplifier

• Modular digital matrix mixer

• 8 slots for modules

• 2 DSP output channels inciuded

• 10-Band parametric equalizer

• Ducker-function (priority)

• 2 operation modes: Mixer or matrix

• Aluminum front panel and steel case

• For rack-mounting, 2 units height

• Colour: black

• Different modules, remote panels and a

sensing microphone for individual adjustment

to the ambient noise

• Brackets for rack-mounting included

IR2

466

LJ

—I

Connection Example

Hotel / banquet room

Model M-9000M2

Audio Input Max. 8 channels, modular (modules optional)Audio Output Preamplifier outputs 1 and 2:0 dBV, 600 Ohm, balanced, removable terminal blocks (3-pins), max. 8 outputsControl Inputs and Outputs RS-232C, D-sub connector (9-pins); 4 control inputs and outputs each, remote volume control, removable terminal blocks.Crosstalk > 64dB (20 kHz)Functions Tone control (bass, treble: ±12 dB), 1 0-bands parametric equalizer (31 steps, 0: 0,3 .5), 15 speaker equalizer,

high pass (-12dB / Oct), 10w pass (-12 dB/ Oct), Compressor (depth 1 to 5), Delay (0 ... 40 ms in 1 ms steps), 32 scene/eventmomories, 2 operation modes: mixer or matrix, key-lock

FrequenyRange 20 Hz... 20 000 HzTotal Harmonic Distorsion < 0,008%5/N Ratio 90 dBPower Supply 230V (50 / 60 Hz)Power Consumption 40WFinish Front: Aluminum, black, case: steel plate, blackDimensions 1W x H x D) 420 x 107.6 x 353 mm, 2 unitsWeight 6kg (without modules)

TOA23

141353

0]

Modules

D-OO1TDual Mic-/Line Input Modulewith DSP

2 balanced Mic/Line InputsDigital Signal Processing:

10-band parametric EQBass/TrebleLoudnessHigh pass / low pass filtersCompressor

Adjustable sensitivity (-60 ... -10 dB, 9-steps)Phantom power (24V DC)Detachable terminal blockMax. 4 input modules per chassisRequired for VOX-Function and input measure

T-OOiTDual Line Output ExpansionModule with DSP

2 balanced line outputsDigital signal processing:10-band parametric EQBass/TrebleLoudnessHigh pass / low pass filtersCompressorDetachable terminal blockMax. 3 output modules per chassis

AN-9001Ambient Noise Sensor Microphone

Ceiling or wall mount condenser microphone.Fits one gang electrical boxUse with AN-OOl T module or DP-L2 processor

ZP-001 TTelephone Zone Paging Module

Telephone paging to up to 8 zonesUses DTMF dialing access outputsDial up to 8 output zones in one operationCompatible with analog extensionor page portPage port operation requiresclosed contactRJ-1 1 telephone plug ordetachable screw terminalsMax. 1 telephone module per chassis

C-OO1TInput / Output Control Module

8 assgignable control inputs foractivationEvent / volume / mute / remotepower on-offEmergency mute8 assignable control outputs foractivating external relaysDetachable screw terminalsMax. 1 control module per chassis

AN-OO1TAmbient Noise Conrol Module

Automatic adjusts output gain tocompensatefor changes in ambient noise level2 microphone inputs with 24Vphantom power14 preset gain ratiosEach input can be assigned tocontrol a specific outputOnly in combination withAN-9001 sensor microphoneMax. 2 modules per chassis

24

ZM-9001Remote Panel with 6 Buttons

ZM-9002Remote Panel with 4 Buttons andVolume Control

4 buttons to activate preset selection orvolume up/downVolume control knobWiring: single conductor shielded cableMax loop resistance 50 Ohm per lineMounting in one gang electical box

__________

Maximum 2 remote panels per chassis

ZM-9003Remote Panel with four interlockingselection buttons and two momentary buttonsMax. loop resistance:250 ohms per lineFits two gang electrical box (American type)Removable Terminal BlockMaximum two ZM-9003 per chassis

ZM-901 1Remote Panel with 4 buttonsScene switching & paging On/Ciffunctionscan be assigned to the buttonsUsed in conjunction with the RC-OO1TRemovable terminal blocks (10 pins)Mounting in one gang electricalbox (american type)

ZM-901 2Wall mounted remote control panelwith a volume control knobUsed in conjunction with the RC-OO1TRemote control moduleThe volume control knob can be set on whichchannel of input or output to adjust volume levelMounting in one gang electrical box(american type)

ZM-901 3Wall mounted remote control panel having8 buttonsUsed in conjunction with the RC-OO1TRemote control moduleScene switching and paging ON/OFF functionscan be assigned to the buttonsMounting in two gang electrical box (american type

ZM-901 4Wall mounted remote control panel having4 buttons and 1 volume control knobUsed in conjunction with the RC-OO1T Remotecontrol module

_________

Scene switching and paging ON/OFE functionscan be assigned to the buttons, and input oroutput channel’s volume adjustment to the volume control knobMounting in two gang electrical box (american type)

6 buttons to activate preset selectionor volume up/downWiring: single conductor shielded cableMax ioop resistance 50 Ohm per lineMounting in one gang electical boxMaximum 2 remote panels per chassis

fl

t’

.. ..

.. ..

.. ..

.. ..

.. 1•

.. ..•: •

1TOA

Ceiling Speakers

Flush Mount Speakers

PC-1 869 (6W)

Metal grille withpunched net

PC-2869 (6 W)

PC-2369 (6W)

•Thin panel

Model PC-1869 PC-2369 PC-2869 PC-2852

Dyn. Cone Driver 12cm 16cm 20cm 20cmRatedlnput 6W 6W 6W 15WTappingslooV 6W/3W/1.5W/0.8W 6W/3W/1.SW/0.8W 6W!3W/1.5W/0.8W 15W/1OW/5W/3WFreguency Response 55 Hz -18,000 Hz 45 Hz - 20,000Hz 40 Hz - 20,000Hz 45 Hz - 20,000 HzSPL(1W,1 ml 90dB 93dB 94dB 96dBBaffie g 180 mm ø 230 mm ø 280 mm 0 280 mmDepth 67.1 mm 72.8 mm 83.6 mm 83.6 mmCeiling hole ø 150 mm 200 mm 250 mm 250 mmWeight 6209 7609 14009 1600g

PC-648R (6W) PC-658R (6W) PC-3WR (3W)

• East & easy installation with spring clamp• Baffie: PP resin, off-white / SECC punching net, off-white

Model PC-648R PC-658R

Dyn. Cone Driver 12cm 16cmRated Input 6W(100V)/3W(70V) 6WTappings 100V 6W/3W/1 W 6W/3W/ 1WTappings 70V 3W! 1.5W / 0.5W 3W / 1.5W! 0.5WFreguency Response 100 Hz -18,000 Hz 65 Hz - 18,000 HzSPL(1W,lm) 90dB 90dBBaifle ø168mm ø192mmDepth 77 mm 73 mmCeiling hole 0 145±5 mm 170±5 mmWeight 4709 500

Model PC-3WR

Output Sound Pressure Level 88dBRated Input lWor3WRated Impedance 3.3 kohmFreguency Response 180Hz -20,000 HzOperating Temparature Range -1 OCto +50C

Dimensions ø 180x 104.5 (d) mmMounting Hole Diameter 150 mmWeight 700 kg

Metal grille and baffie

Metal grille and baffie

PC-2852 (15 W)

—Metal grille and baffie

• East & easy installation with spring clamp• Push-in connectors for speaker cables• In-/Out bridge connection• Baffie: Steel plate, off-white paint /

Grille: Surface-treated steel plate net, off-white paint

i i, PC-1 869

PC-2869 / PC-2852 PC-2369

Metal grille and PP baifle Metal grille and PP baifle flush-mounted ceiling speaker employinga high power handling, splash-proof, smallfulI-range speaker.

« -

\ 1

TOA25

•Thin panel• Special design for thin ceiling• Fast & easy installation with spring catches• Push-in connectors for speaker cables• In-/Out bridge connection• Baffie: Steel plate, off-white paint 1

Grille: Surface-treated steel plate net,off-white paint (RAL 9010 or equivalent)

• PC-3CL: Clean room / shower room speaker• For humid or high temperature areas• Weatherproof in compliance with IP-64• Resistant against formalin and iodine solutions• Wide temperature range of -20.60°C• Fits in 0100 mm holes• PC-5CL: Clean room speaker• Sealed high-molecular speaker membrane to prevent floating

dust particles from contaminating the environment.• Resistant against formaline

Model PC-1869S

Dyn. Cone Driver 12cmRated Input 6WTappings 100V 6W/3W/ 1.SW/0.8WFreguency Response 55 Hz -1 8,000 HzSPL(1 Wim) 90dBBaifle ølBOmmDepth 111 mmCeiling Holeø 150 mm

ÇinThickness max. 34 mmWeight 750g

Surface Mount Speaker

______

PC-2668 (6 W)

• Metallic firedome construction prevents flame andsmoke from spreading into ceiling installation

• 12 cm speaker• Easy installation with spring catches• Push-in terminals for speaker cable (PC-1 867F) or

Ceramic-terminals (PC-1867FC)• Aluminium baifle• PC-1 867FC in accordance with British Standard BS5839

(Part 8)

Model PC-1 867Fl 1867FC

Dyn. Cone Driver 12cmRated Input 6WTapping5 100V 6W/3W/ 1.5W/0.8WFreguency Response 100Hz -16000 HzSPL(1W,lm) 90dBBaffie 0180mmCeiling Hole 0 156 mmWeight 1.3kg

6

.12cm Speaker• Easy installation With spring catches• Push-in terminals for speaker cable• Exposed installation to the ceiling• In-! Out bridge connection• ABS resin baifle• Mounting bracket for back box inciuded

Model PC-2668

Dyn. Cone Driver 12cmRated Input 6WTappings 100V 6W/3W/ 1.5W/0.8W

Freguency Response 100 Hz -16.000 Hz

SPLI1W,lm) 90dBBaffie 260 mm

Dimensions ø 260 x 92.5 mmWeight 820 g

26

TOA

Flush Mount Speakers

PC-1 8695(6W)

Sealed Shower Speaker

PC-3CL (3 W) / PC-5CL (5 W)

Model PC-3CL PC-5CL

Dynamic Cone Driver 7.7cm 8cm

Rated Input 3 W 5 WContinuous Program 4.5W 7.5W

Impedance 3.3 kOhm (100V) 2 kOhm (100V)

FreguencyResponse 150Hz...2OkHz 150 Hz...2OkHz

SPLI1W,lm) 87dB 87dB

SPL at Rated Input (1 m) 92 dB 94 dB (97 dB Siren Sound)

Dimension of Baffle 0 139 mm 116 mmMounting Depth 104.5 mm 110 mm

ceiling Hole Diameter 100 mm 98 mmTemperature Range -20 ... + 60°C -20°C ... + 55°C

Weight 550 g 620 g

Fire Dome Speakers

PC-1 867F! PC-1867FC(6W)

Box Speakers

Speaker for General Use

BS-1 030B / 1030W (30W) IPx4• Aesthetically pleasing design blends in

modern buildings and other facilities, such asboutique, restaurant and amusement park

• Cost-effective high power PA box speaker• 2-Way bass reflex speaker• Low impedance (8f)) or high impedance (100V)

selectable by rotary switch• Splash proof according to lPx4• Expanded installation options. Can be mounted

horizontally or vertically: flush-mount wall!ceiling, with or without mounting bracket onthe wall

• Equipped with U-angle mounting bracketOptional wall and ceiling mount brackets

Model BS-1030B BS-1030W

Enciosure Bass reflex Bass reflexRated Input 30W 30WImpedance 80 80Tappings 100V 30W / 20W / 15W / 10W / 5W 30W / 20W / 15W / 10W / SWSPL 90dB(1W/lm) 90dB(1W/lm)Freguency Response 80 Hz - 20,000Hz 80 Hz - 20,000 HzSpeaker Systems 12cm dynamic cone speaker, 2.5 cm balanced dome tweeterOperating Temperature -1 O’C to +50C -1 0C to +50CGrade of Protection IPx4 lPx4Finish Black WhiteDimensions 1W x H x D) 196 x 290 xl 50 mm 196 x 290 x 1SO mmWeight 2.5kg 2.5 kg

BS-1110(10W)/BS-1120(20W)

Model BS-1110 BS-1120

Rated Input 10W 20WImpedance 40 80TappingslooV 1OW/5w 20W/1OWSPL 92 dB (1 W / 1 m) 95 dB (1 W / 1 m)Freguency Response 150 Hz - 14,000 Hz 150 Hz - 20,000 HzSpeaker 2 x 12cm 4 x 12cm + 2.5 cm tweeterOperating Temperature -1 0C to +50’c -1 0C to +50cFinish White WhiteDimensions (W x H x D) 180 x 360 x 100 mm 180 x 720 x 100 mmWeight 2.9kg 5.1 kgOptional Mount Bracket YS-301, SP-410,WCB-12W YS-301

TMB-1W, stand: ST-16A

• For religious facilities, lecture rooms and school auditoriums• BS-1 110W with 2 x 12 cm Cone Speaker and BS-1 120W with

4x 12 cm cone speaker and dome tweeter• Wide horizontal and narrow vertical dispersion angle• Low impedance (4 f2 /8 f2) or high impedance (100V)

Optional Accessories

• Vertical array possible• Mounting horizontally or vertically. Optional wall

mount brackets

Adjustable wall /ceiling mount bracketfor BS-1 030Colour: SilVer

Flush Mount Bracketfor BS-1030

Stand

1TOA27

ô0

ô

1

SP-41 0 SP-420 ST-16A

Wali-Mounting Box Speakers

BS-634 / BS-634T (6W) / BS-1 034 / BS-1 034S (10W)

1 1

• Flat rectangular box speaker for vertical or horizontalwall mounting

.6W (BS-634) or 10W (BS-1 034) rated input• B5-634T/ BS-1034S have an attenuator• High sound quality and clarity• Bridge wiring available• Colour: off-white (BS-1 034S: Silver), Case: HIPS resin,

punching net: SECC steel.

BS-633A / BS-633AT (6 W)173 • 101 -

• Wall Mounting Box Speaker with 12 cm conespeaker for BGM / PagingBS-633AT comes with attenuator

• ABS resin enclosure

Model BS-634 BS-634T BS-1034 BS-10345 BS-633A B5-633AT

Speaker Component 1 2cm cone type 12cm cone type 12cm dame type 12cm dame type 12cm cone type 1 2cm cone type

Ratedlnput 6W 6W 10W 10W 6W 6W

TappingslooV 6W/3W 6W 10W/SW/ 10W/5W! 6W/3W/1 W 6W/3W

3W/1W 3W/1W

Tappings7oV 3W/1.5W 3W 1OW/5W/2.5W/ 10W/5W/2.5W/ 3W/1.5W/0.5W 3W/1.5W

1.5W/0.5W 1.5W/0.5W

FreguencyRe5ponse 120Hz...l8kHz 120Hz... 18kHz 120Hz...2OkHz 120Hz...20kl-lz 120Hz...15kHz 120 Hz...l5kHz

SPL(1 W, 1 m) 90dB 90dB 90dB 90dB 91 dB 91 dB

Connectors Push-in terminal Push-in terminal Push-in terminal Push-in terminal Push-in connector Push-in connector

Dimensions(WxHxO) 210x330x80mm 210x330x80mm 210x330x80mm 210x330x80mm 173x195x101mm 173x195x101mm

Weight 1.3kg 1.3kg 1.4kg 1.4kg 780 g 810 g

BS-678 / BS-678T/ BS-678B / BS-678BT (6W)

BS-678: 6W, whiteBS-678T: 6W, white, attenuatorBS-678B: 6W, blackBS-678BT: 6W, black, attenuator

Wooden cabinet speaker with PVC sheet andHIPS baifle. Easy impedance selection. Bridge Wiringpossible. Push-in connector.Colours: off-white RAL 9010 or equivalent orblack RAL 9011 or equivalent

Model BS-678 / 678B / 678BT / 678TSpeaker Component 16cm double cone type

Ratedlnput 6W(100V)!3WI7OV)Tappings 100V 6W/3W/1.5W/0.8WTappings7oV 3W/1.5W/0.8W!0.4WFreguency Response 150Hz - 20,000HzSPL(1 Wim) 94dB‘:onnector Push-in connector (bridging terminal)Dimensions(WxHxD) 25Oxl9OxllOmmWeight 1.7 kg

28

BS-680F / BS-680FC (6W)

L2Metal cabinet speaker for surface or flush-mounting. High soundquality through 16 cm double cone speaker High sound pressure level. Bridge Wiring possible. Colour: off-white (RAL 9010or equivalent). BS-680FC comes With 2 ceramic screw terminalblocks and thermal fuse (compliance with BS 5839 part 8).

Model BS-680F BS-680FCSpeaker Element 16cm double cone type 16cm double cone type

Rated lnput 6W (100V) / 3W (70V) 6W (100V) / 3W (70V)

Tappings 100V 6W / 3W! 1,5W / 0.8W 6W / 3W / 1.5W / 0.8WTappings 70V 3W! 1.5 W/0.8 W/0.4W 3W! 1.5 W/0.8 WI0.4 W

Freguency Response 150 Hz - 20,000Hz 150Hz - 20,000HzSPL(1 W, 1 m) 94dB 94dBÇonnector Push-in connector Screw terminal (ceramic)Dimensions 1W x H x D) 310 x 190 x 87.2 mm 310 x 190 x 87.2 mmWeight 3 kg 3 kgOther Features — BS 5839-8 equivalent

TOA

Wide Range and Column Speakers

Pendant Speakers

PE-64 (6W) / PE-304 (30W)

• Special design to blend with lighting equipment• 30W (PE-304) or 6W (PE-64) rated input• Rugged HIPS resin enciosure• Excellent sound quality• Inputs for 100V and 70V systems, PE-304 additionally with 8 a input• Easy impedance selection• Colour: off-white (RAL 9010 or equivalent)• Paintable• Equipped with 5 m cord

Model PE-64 PE-304

DynamicConeDriver 12cm 12cmRated Input 6W (100V) / 3 W (70 VI 30 W (100V) /3 W (70V)Impedance 100V/70V 100V/70V/80Tappings 100V 6W / 3 W/1 W 30 W/ 20W/iS W/ 10W / 5WTappings 70V 3W / 1.5W / 0.5W 30W / 20W / 15W / 10W / 5WFreguency Response 100Hz - 18.000Hz 70Hz - 20,000HzSPL(1W,lm) 90dB 91dBconnection Push-in connector (bridging terminal, 2-branch) Push-in connector (bridging terminal, 2-branch)Dimensions 0 186x251 mm 0 186x251 mmWeight 1.5kg 2.1 kg

Setup Guide for Speakers

Building Type Office Hospital School Supermarket Shopping Mali Gymnasium Church/Mosgue

Ceiling type flat flat flat flat flat non-flat non-flat

Recommended Speaker BS-633 PC-2369/1 869 PC-648R PC-648R PJ-64 HX-5 series F-1000 series

BS-634/1034 PC-2869 PC-2852 PC-1869 PJ-304 TZ-105/205 F-1300 series

85-680 PC-6435/6445 PC-2668 PC-2668 PJ-100 TZ-301 F-2000 series

. PC-645R/646R PC-i 867F PJ-200 F-1 300 series BS-1 110 / 1120

[ 4, .‘Ç’ ‘ F 2000 series HX 5 series

• Calculation for Amplifier and Speaker Power

Amplifler Amplifier Speaker Total Quantity of Speaker

Mndel’ Output •- TntIInput. J” 1W 3W 6W,• •.

- jA-2030/A-1803 -7-ze.”’ 30W :‘- 30W 30 10 5

A-2060/A-1706/A-18 60W 60W 60 20 10

A-2120/A-1712/A-1812 120W 120W 120 40 20

A-2240/A-1724 240W 240W 240 80 40

• Typical Ceiling Speaker Arrangement

L©

©( )©( @X

18m

Situation : Office 18m x 12 m with 3m Ceiling height

Purpose : Paging, BGM

Solution Speaker with 6m balance

Please refer to page 58—Technical Column

d TOA29

Projection Speakers for Indoor Use

PJ-64 (6 W) / PJ-304 (30W)

• Speaker for announcements and music in buildings with high noise level• Wide range frequency response• Housing: HIPS resin; grille: steel net• Easytomount• Colour off-white (RAL 901 Oor equivalent)• For 100V, 70V systems, PJ-304 additionally for 80 systems• Complete with mounting bracket for easy installation

Model PJ-64 PJ-304

Dyn. Cone Driver 12cm 12cm

Rated Input 6W(100V)/3W(70V) 30W

Tappings 100V 6W / 3W / 1 W 30W / 20W / 15W / 10W / 5W

Tappings 70V 3W! 1SW/0.5W 30W!20W/ 15W! 10W/5W

Response 100 Hz - 18,000 Hz 70 Hz - 20,000 Hz

SPL(1W,lm) 90dB 91dB

Dimensions 0 186 x 369 mm 0186 X 369 mm

Weight 1.5kg 2.1 kg

PJ-1 00W (10W) PJ-200W (20W)

Wide range Speaker for announcements and music, easy to mount

140 195

160 108 2D3

SPLuptolO2dB(lm) SPLuptolO8dB(lm)

Model PJ-100W PJ-200W

Dyn. Cone Driver 12cm 16cm

Ratedlnput 10W 20W

Tappings 100V 10W / 5W / 2.5W 20W / 10W! 5W / 2.5W

Freguency Re5ponse 65 Hz - 15,000Hz 50Hz - 20,000 Hz

SPL(1W,lm) 92dB 95dB

Dimensions (W x H x D) o 140 x 195 mm (without bracket) 0 180 x 250 mm (without bracket)

Weight 1.8 kg 2.5 kg

30

TOA

rF.

0186

Projection Speakers for Outdoor Use

Weatherproof polyurethane resin paint and impact-proof lightweight ABS resin enciosure, and the stainless steel bracketsenable many years of outdoor use. Constant directivity coverage (90 degree in horizontal) for CS-1 54 and CS- 304.

CS-64 (6 W)233

CS-1 54 (15 W) / CS-304 (30W)

SPLuptolO4dB(1 m)

3664

272

1IP-65, 900 horizontal constant directivitycoverage. SPL up to 109 dB (1 m, CS154) resp. up to 113 dB (1 m, CS-304)

Model CS-64 C5-154 C5-304

Dyn. Cone Driver 12cm 12cm 12cmRated Input 6W 15W 30W

Tappings 100V / 70V 6W / 3W! 1 W 15W / 10W / 5W 30W / 20W / 10WFreguency Response 130Hz - 13,000 Hz 150Hz - 15,000Hz 120Hz - 15,000 Hz

SPL (1 W, 1 m) 96 dB 97 dB 98dBDimensions (W x H x Dl 233 x 224 x 208 mm 366 x 230 x 272 mm 366 x 230 x 272 mm

Weight 1.5kg 2.8kg 3.1 kg

TOA31

Horn Speakers IP 65

Horn Speakers for General Use

High input power handling for multiple application. Excellent for outdoor use. Durable construction. Long termreliable operation. Screws and bolts of stainless steel.

TC-615/615M(15W)

Horn Speaker with 250- 7,000 Hz Frequency Response and120 dB (1 m) Sound Pressure Level for Paging and BGM

TC-631 /631M(30W)463

Horn Speaker wtth 200 - 6,000 Hz Frequency Response and125 dB (1 m) Sound Pressure Level for Paging and BGM

Model TC-615 TC-615M TC-631 TC-631M

Rated Power 15W 15W 30W 30W

Tappingsloov — 15W/10W/ — 30W/15W/5W/3W 10W/5W

Tappings7ov — 15W/7.5W/ — 30W/15W/5W/2.5W/1.SW 7.5W/5W/2.SW

Ratedlmpedance 80 — 160 —

Freguency Response 250 Hz - 7,000 Hz 250Hz - 7,000 Hz 200Hz - 6,000 Hz 200 Hz - 6,000 Hz

SPLI1 Wim) 108dB 108dB 110dB 110dB

Dimensions ø 4006 376 mm 0 400 x 376 mm ø 500 x 463 mm 0 500 x 463 mm

Weight 3kg 3.2kg 4.1 kg 4.5 kg

IP Grade IP 65 IP 65 IP 65 IP 65

• Distribution Pattern of Horn Speakers

300.

200

100

‘:1000

100

200

Typical Audible range

30a. -

The above pattern is shown under deal environment.

(m) Air temperature and wind effect the pattern greatly

(m)

Speaker SPL Distance

30W 75dB 316m70dB 562m65dB 100Cm

50W 75 dB 398 m70dB 708m65dB 1259m

32

* 65 dB {Suburb Areal70 dO (Town Areal75 dB (Inner City>

TOA

30W

50W

TC-651M (50W)Horn Speaker with high intelligibility

For outdoor use• IP 65

High SPL

Horn Speaker with 200 - 6,000 Hz Frequency Responseand 111 dB (1 W / im) Sound Pressure Level forPaging and BGM

Model TC-651M

Rated Power 50WTappings 100V 50W (200 Ohm) / 30W (330 Ohm) / 15W (670 Ohm)Tappings 70V 50W (100 Ohm) / 25W (200 Ohm) / 15W (330 Ohm) / 7.5W ( 670 Ohm)Freguency Response 200Hz - 6,000 HzSPL(1 W, 1 m) 111 dBDimensions 0 400 x 376 mmWeight 4kglPGrade 1P65

Active Horn Speakers

20 Watt, Amplified Horn Loudspeaker: Class D 1P65

PS20D630 (20 W)

• For heavy-duty industrial use, ideal for use with today’s IP CCTV cameras• With preamp• Built-in 20 Watt power amplifier (Class “D” technology)• Master gain may be set to 12, 18, 24 or 36db by means of an internal switch.• Internal volume control• For indoor and outdoor use• Wide input sensitivity range• Optimised for the transmission of human speech• Weatherproof to 1P65 rating• Supplied with an 18 Volt DC, switch-mode power adapter

(90 VAC 280 VAC, 50/60 Hz)• Supplied with a universal, stainless steel “U” bracket• Transformer balanced input, allowing long cable runs where required• White epoxy finish

152

51 51

\a X Holesllmm Dia

Model PS20D630

Termination 2m Flying LeadInput Level/Impedance 1V p-p (1 kOhm, Maximum Amplifier Output)Supply Voltage/Current 18 Volt DC, regulated (1100 mA max)Signal Dam 12, 18,24 or 36db (factory pre-set to 36 db)Volume Adjustment Internal volume controlEffective Frequency Range 250-10,000 HzSound pressure level Up to 120 dB (dependant on signal input level & volume control setting).Min/Max temperature -20°C to +55°C (free of dew condensation)IP rating 1P65Colour WhiteMaterial Flare : Spun aluminium / Reflector & Rear Cover: ABS ResinWeight 2.4 kg

TOA33

Horn Speakers for Paging

___________

Designed compact for easy handling. Stainless steel anti corrosion bracket is equipped. Color: Off-white.

SC-610/610M(1OW)

max.12OdBSPL(1 m)

SC-615/615M (15W)

max.124dBSPL(1 m)

SC-630 / 630M (30W)

265 277

max.128dBSPL(1 m)

SC-651 (50W)

- 430 327

______

L______Jhmax.126dBSPL(1 m)Can be mounted on cars and trucks formobile use

Model SC-610 SC-610M sc-615 SC-615M

Ratedlnput 10W 10W 15W 15W

TappingslooV — 1OW/5W/3W/1W — 15W/10W/5W/3W

Tappings7oV — 1OW/SW/2.5 Wf — 15W/7.SW/5W/

1.5W/0.5W 2.5W1.SW

Lowlmpedance 8f) — 8f) —

FreguencyRange 315— 12,500 Hz 315— 12,500Hz 280- 12,500Hz 280- 12,500Hz

SPL(1W,lm) 110dB 110dB 112dB 112dB

Oimensions(WxHx D) 172x 161 x 188 mm 172x 161 x 188 mm 222x 179x234mm 222x 179x234mm

Weight 1kg 1.2kg 1.3kg 1.3kg

IP Grade 1F 65 IP 65 IP 65 1F 65

Model SC-630 SC-630M sc-651

Rated Input 30W (mobile u5e: 15W) 30W 50W (mobile use: 30W)

Tapping5lOOV — 30W/15W/1OW/5W —

Tappings7oV — 30 W/15W/7.5W /5W/ —

2.5W

Lowlmpedance 80 — 16f)

Freguency Response 250— 10,000Hz 250— 10,000Hz 250— 6,000Hz

SPL(1W,1 ml 113dB 113dB 109dB

Dimensions 1W x H x D) 285 x 227 x 277 mm 285 x 227 x 277 mm 430 x 297,5 x 327 mm

Weight 1.7kg 2kg 3.4kg

1F Grade 1F 65 )P 65 1F 65

Typical Connection of Low Impedance and High Impedance Speakers

34

A-2060 (60W)

A-1806 (60W)

A-1706 (60W)

Tc-631

Tc-631

8fl

40Output

Impedance

sc-63o

80

SC-630

80

Tc-615M

100VHigh

OutputImpedance

4er

SC-615M

or

sc-61 5M

or

5C-61 5M

iTOA

Driver Units

TU-631 (30W)/TU-651 (50W)

126

/TU-631M(30W)/TU-651M(50W)

149

Set toe repedoroce se[ctor to thedesired impedance

03E20WO

Impedance Selection

Set the rnpedarce seictor to toedesired impedance

• Highly efficient horn drivers for reflex horns•Weatherproof OP 65) in combination with following reflex horns:TH-650 orTH-660• 2 input power versions: 30 or 50W• For high impedance (TU-631 M / TU-651 M) or low impedance applications (TU-631 /TU-651)

Model TU-631 TU-651 TU-631M TU-651M

Rated Input 30W 50W 30W 50WRatedimpedance 16f) 16f) - -

Tappings 100V - - 30W / 15W /10W / 5W 50w /30W /15WTappings 70V 30W! 15W! 7.5W! 5W! 2.5W 50W! 25W! 15W! 7.5WFreguency Response 150Hz - 6,000 Hz 150Hz - 6,000Hz 150Hz - 6,000 Hz 150 Hz - 6,000HzSPL(1W,lm) 110dB 110dB 110dB 110dBHorn Coupling (INCH) 1-3!B” 1-3/8’ 1-3/8’ 1-3/8’Dimensions 0139x106mm 0139x106mm ø139x149mm ø139x149mn,Weight 1.4kg 1.9kg 2kg 2.7kgIP Grade IP 65 IP 65 IP 65 IP 65

Reflex Horns

TH-650 / TH-660 TU-Series driver required (optional)

• Rugged construction• Symmetrical sound dispersion• Durable powder coating on the surface of horns

ensures superb weatherproofing

Model TH-650 TH-660

Cut-offFreguency 200Hz 200HzSound Dispersion Angle 50’ (2 kHz) 70’ 12 kHz)Dimensions (mm) 0 500 x 394 0 600 x 425

without DriverHorn Coupling (INCH) 1-3/8’ 1-3/8’Weight 2.9kg 3.6kgNumber of Drivers to be 1 1mountedApplicable Drivers TU-631 /-631 M/-651/-651 M TU-631 -631 M/-651/-651 MIP Grade IP 65 IP 65

iTOA35

TU-631!651

TU-631M !TU-651MImpedance Selection

Accessories

Flush Mount Volume Control

AT-1 2UP / AT-5OUP / AT-1 2UPR / AT-5OUPR(flush-mount use, DIN 49037)

• 1 2-steps• Matching with GIRA switcher accessories• UPR-version with priority relay• AT-12UP/AT-12UPR 12W, depth: 26 mm

AT-5OUP / AT-50UPR 50W, depth: 40 mm• With covered label• Colour: Off-white

Program Selector

PGW-6 / PGW-6R

Flush Mount Amplifier

U P-MV-206

• Five attenuation settings(0ff! 0/-6 /-12 / -18 dB), over aninput range from 0.5W to 6W(AT-063P), 30W (AT-303P) or60W (AT-603P)

• Push-in connector (bridging terminal)• Matching wall mount boxes:

YC-301 (Flush-mount Back Box) andYS-1 1 A (Surface-Mount Back Box)

jTOA[:ir.:.• Program selector• Flush mount use, DIN 49037• One of 6 programs selectable• PGW-6R with priority relay• Mounting depth: 30 mm• Options: Gira switcher accessories

Impedance Meter

• Flush mount amplifier (DIN 49037)• Pre-amplifier with microphone (XLR) and AUX (RCA pin) input• Phantom voltage for microphone on PCB selectable• Volume control for microphone and AUX separately• For flush mounting 3 flush mount boxes according to

DIN 49037 are required• Finish: off-white

36

Fast detection of short circuits etc.• For easy and exact measurement of speaker line impedances• Battery driven for mobile use (4 Mignon (AA) batteries)• 30 - 60 hours continuous use with one set of batteries• Built-in 1 kHz oscillator• Range5f2-lOOkQ• Graphic conversion table impedance - power• Inci. a case and one set of test leads

TOA

Attenuators

AT-063P (6W) / AT-303P (30W) / AT-603P (60W)

AT-063P / AT-303P

te

AT-603P

\p1te32.A [.85

ZM-1 04A

Foreground Music Speakers

Harmonized Engineering Speakers

The H-Series speakers combine pleasant design with excellent acoustical characteristics

H-1 (90W)

• Attractive 2-way design speaker• Narrow coverage area allows a controlled sound• Speaker axis can be mounted to match with the room axis• Sound direction can be adjusted within 90°• Colour: White• Built-in transformer allows both high and low impedance:

40, l600r7OV, 100V• Easy installation in standard electrical gang boxes• Fire-rated ABS enclosure (UL Standard 94: V-0 grade)

H-2 / H-2WP (120W)

‘1/ :2 \

,— Ii 1 II

\ l’-*-1 )‘ -—

— -t-- — —o68

• 2-way design speaker• Fire-rated ABS enciosure (UL Standard 94: V-0 grade)• H-2WP: Weatherproof IP 64 certified, matches the requirements

for outdoor applications• Narrow coverage area allows controlled sound• Speaker axis can be mounted to match with the room axis• Sound direction can be adjusted within 360°• Easy installation in standard electrical gang boxes

H-3 / H-3WP (150W)

ll

• 2-way speaker with stylish design• High quality sound between and in front of each speaker unit• Ideal for long but narrow areas such as corridors or tea gardens• H-3WP: Weatherproof version for outdoor applications• Easy, unobtrusive installation at above head-height• Installation directly to wall• 180° coverage pattern, eliminating acoustically dead areas• Low impedance (80 / 160) or high impedance (70V! 100V)• Fire resistant ABS according to UL 94:V-0

HB-1 (240W)

• Unobtrusive design• Compact dimensions• Very low installation depth for flush-mount use• Acoustic super woofer enclosure• Frequency response exactly matches with H-1, H-2 and H-3• Large volume for an excellent low frequency audio response• Easy flush-mount installation into walls or into ceilings

Model H-1 H-2 H-2WP H-3 H-3WP HB-1

Enciosure Sealed type Sealed type Sealed type Sealed type Sealed type Acoustic Super WooferRated lnput 30W 40W 40W 50W 50W 80WContinuous Program 90W 120W 120W 150W 150W 240W

Impedance 40/160 40/160 40/160 80/160 80/160 80100V: 12W / 6W / 3W 100V: 30W / 15W! 7.5W70v: 12 W/ 6W / 3 W / 1.5 W 70V: 30W / 15 W / 7.5 W / 3.75 W

FreguencyResponse 120-20000Hz 100-20000Hz 100-20000Hz 100-20000Hz 100-20000Hz 45-200HzSPL (1 W, 1 m) 85 dB 88 dB 88 dB 89 dB 89 dB 91 dBDimensions(WxHxD) 312x126x90mm 0268x111rnm ø268x111mm 295x318x129mm 295x318x129mm 430x544x135mmWeight 1.5 kg 2.1 kg 2.1 kg 3.3 kg 3.3 kg 1 1 kgcolour White White White White White WhiteSpecial Features IPx4 IPx4 20cm Woofer

TOA37

BotÉorV

Wide Dispersion Flush Mount Speakers

Expanded listening coverage area through extra-wide dispersion characteristics. Easy installation. Various models andand accessories meet a wide variety of requirements. All materials are fire resistant in accordance with UL-94 VO.The back-can additionally prevents fire and smoke into the ceiling

2-Way HiFi speaker for high powerapplications e.g. for high ceilings(3...6 m)• l6cmspeaker• Diffusor for wide dispersion of

high frequencies• Metal back can

F-2322C (120W)

1

Equalizing controlled type full rangespeaker. Cost effective if many speakers are installed. For medium ceilingheight (2...4 m).• Heat-resistant back can• Optimized for use with AC-120

Controller. deal for use withadditional subwoofers

• Diffusor for wide dispersion of highfrequencies

2-Way HiFi speaker for mediumceiling height (2.4 m).• l2cmspeaker• Diffusor for wide dispersion of

high frequencies• Metal back can

Full range speaker according toUL- 94V0For medium ceiling height (2...4 m).• l2cmspeaker• Metal back can• Flat grille

Model F-2852C F-2322C F-2352c F-122c

Rated Input 60w(8Q) 60W(80) 60W(80) 60W(80)

continuous Program 180W(80) 120W(80) 120W(8C2) 120W(8fl)

lmpedance 100V/70V/25V//160/80 100V/70V/25V//160/80 100V/70V/25V//16C2/8f) 100V/70V/25V//160/80

Tappings 100V 60W/30W/15W/3W 30W/1OW/3W/1 W 30W/10W/3W/1 W 30’N/10’JV/3W/1 W

Freguency Response 60Hz - 20,000Hz 70Hz - 20,000Hz 70 Hz - 20,000Hz 70Hz - 20,000Hz

SPL (1 W, 1 m) 91 dB 90 dB 90 dB 90 dB

Finish Enclosure, punched net: Steel plate, Baffle rim: Fire-resistant A8S resin (IJL-94 V0), white paint 1dm and punched net)Mounting Hole 0 250 mm o 200 mm ø 200 mm 0 200 mm

Dimensions 0 280 x 227 (Dl mm ø 230 x 200(01 mm ø 230 x 229(0) mm o 230 x 229(0) mm

Weight 5.1 kg 3.7 kg 3.7 kg 3.7 kg’

mcl. mounting accessories

38

Sound Dispersion of Conventional Speakers

—

.1. .1.

TOA

Wide Dispersion Speaker

F-2852C (180W) F-1 22C (120W) F-2352C (120W)

‘ji’

Wide-Dispersion Flush Mount Speakers Garden Speakers

Cost-effective compact model for lowpower applications and mediumceiling height (2...4m)• Only 117 mm mounting depth• Flat front panel• 10cm full range speaker

2-way wide range speaker with diffusor forlow power applications and medium ceilingheight (2...4m).• 12 cm cone woofer and dome tweeter• Easy installation• Diffusor for wide dispersion of highfrequencies• For use in ceilings with minimal depth

• Stylish, attractively designed outdoorspeaker• Highly reliable performance• FulIfilIs IPX4 requirements• Speaker wiring and base unit can beinstalled in the ground• High Impedance• Enclosure made of FRP resin

Model F-1522Sc F-23525C

Rated Input 9W(80l 9W(80)Continuous Program 18W (801 18W (80)Impedance 100V/70V/25V// 160/80 100V/70V/25V// 160/80Tappings 100V 6W/3W 6W/3W/1 W/0.5WFreguency Response 65 Hz - 18,000Hz 80Hz - 20,000 HzSPL(1W,lm) 88dB 89dBFinish Punched net: Steel plate, baffie rim: Fire-resistant ABS resin (UL-94 VO),

White paint (rim and punched net), dust proof bag: artificial fiber, blackMounting Hole 0 135 mm 0 200 mmDimensions 0 155 x 117(D) mm ø230x 154(D) mmWeight 1 kg (mci. panel) 1.5 kg (mcl. panel)

Optional Accessories

For F-Series:Trim Ring

Model GS-302

Enclosure Sealed type

SPL(1W/1M( 87dBFreguency Response 100 Hz - 8,000 HzSpeaker Component 1 2cm sp)ash-proof cone typeInput Terminal Push-in terminalApplicable Cable Solid copper wire 008-el .6mm

Stranded copperwire: øO.75-øl.25mm 2

Water Capab(lity Meets IPX4 reguirementsDimensions 0 270 x 335 (H) mmWeight 2.4 kg

For surface mount or pendinginstallation of flush-mountspeakers

For louvered ceiling supporte.g. to reduce the bad

For installation of flush-mountceiling speakers in largerexisting holes or for louveredceiling support

For direct mounting to the ceiling Withanchor bolt e.g. for a weak louveredceiling

Equalizing Speaker Controller (for F-1 22C)

AC-120

• For the use with the F-1 22C• The electronic controller’s equalizing and filter circuitry

provide optimal balancing characteristics•Two channels can be controlled plus one low output for

an additional subWoofersystem (e.g. FB-l000rHB-1)

Model AC-120

Inputs (electronic bal.) 2x +4 dBm (max.±20 dBm)

Outputs (electronic bal.) 2x +4 dBm )max.±20 dBm),lx +4 dBm (max.+20 dBm) low Out

Freguency Response 20 Hz - 20,000HzDistortion < 0,05%Hum & Noise < 94 dBDimensions (WxHxD) 482.6 x 44 x 297.5 mmAC-Line Vo)tage 230V, 50/60 HzPower Consumption 9WWeight 3.7 kg

TOA39

F-1522SC (18W) F-2352SC (18W) GS-302

Back Can Tile Bar Bridge

HY-BC1 HY-TB1 HY-TR1 HY-AH1

Anchor Hanging Bracket

High Quality Sound Speakers

Fashion Speakers for Foreground Music

F-1 000B / F-1 000W (90W)F-1 000BT / F-1 000WT (15 W)F-1 000BTWP / F-1 000WTWP (15 W)

2-Way Bass Reflex Speaker

F-1 300B / F-1 300W (150W)F-1 300BT / Ei 300WT (30W)F-1 300BTWP / F-1 300WTWP (30 W)

2-Way Bass Reflex Speaker

• Wide dispersion speaker system• Compact 2-way speaker inciudes a high

quality 10cm woofer and balanced dometweeter with a special octagonal horn for dear,wide-area sound coverage

• 3 different versions available: Low impedance,high impedance (,,T”) for 100V line andweatherproof version (,,WP”)

• Great variety of brackets available• Colour: “B” models are black,

“W” models are white• Paintable enciosure and front grille• Wall & ceiling bracket included

• Wide dispersion speaker system• Compact 2-way speaker includes a high

quality 13 cm woofer and balanced dometweeter with a special octagonal horn for dear,wide-area sound coverage

• 3 different versions available: Low impedance,high impedance (,,T”) for 100V line andweatherproof version (,,WP”)

• Great variety of brackets available.• Colour: “B” models are black,

“W” models are white• Paintable enclosure and front grille• Wall & ceiling bracket included

Model F-1 000B / F-1 000W F-1 000BT / F-1 000WT F-1 0008TWP / F-1 000WTWP

System 2-Way, bass-reflex 2-Way, bass-reflex 2-Way, bass-reflexPower Handling Capacity 30W (rated) / 90W (continuous program) 15W 15WTappings 100V - 15 W / 5 W / 3 W / 1 W 15 W / 5 W / 3W / 1 W

Lowimpedance 80 - -

Freguency Response 85 Hz - 20,000 Hz 85 Hz - 20,000Hz 85 Hz - 20,000 Hz

Crossover Freguency 5 kHz S kHz 5 kHz

SPL (1 W, 1 m) 87 dB 87 dB 87 dB

Water Protection - - lPx4

Dimensions 1W x H x D) 130 x 202 x 131 mm 130 x 202 x 131 mm 130 x 202 x 131 mm

Weight 1.8kg 1.8kg 2 kg

Model F-1 30GB / F-1 300W F-1 3008T / F-1 300WT F-1 300BTWP / F-1 300WTWP

System 2-Way, bass-reflex 2-Way, bass-reflex 2-Way, bass-reflex

Power Handling dapacity 50W (rated) / 150W (corltinuous program) 30W 30W

Tappings 100V - 30W / 10W / 3W! 1 W 30W / 15W / 3W / 1 W

Lowlmpedance 80 - -

Freguency Response 80Hz - 20,000Hz 80Hz - 20.000 Hz 80 Hz - 20,000 Hz

Crossover Freguency 2 kHz 2 kHz 2 kHzSPL (1 W, 1 m) 90 dB 90 dB 90 dBWater Protection - - lPx4

Dimensions(WxHxD) 162x250x161mm 162x250x161mm 162x250x161mm

Weight 3.1 kg 3.6kg 3.6kg

40

TOA

—:1

F-2000B / F-2000W (150W)F-2000BT / F-2000WT (60 W)F-2000BTWP / F-2000WTWP (60 W)

2-Way Bass Reflex Speaker

• Wide dispersion speaker system• Compact 2-way speaker inciudes a high

quality 20cm woofer and balanced dometweeter with a special octagonalhorn for dear, wide-area sound coverage• Dispersion angle of 1100 x 100°• Easily mountable 80° x 800 horn adaptor forincreased dispersion controlincluded• 3 different versions available: Low impedance,high impedance (,,T”) for 100Vline and weatherproofversion (,,WP”)• Great variety of brackets available• Colour: “B” models are black, W models arewhite• Paintable enciosure and front grille• Wall & ceiling bracket included

Mounting Brackets for F-1 000 /F-1 300 SeriesHY-BH1OBBoard Hanger Bracket• For F-1000 Series• Colour black• Weight2log• Dimensions (W x H x D)

48x lOOx 108 mm

HY-CL1OB and HY-CL1OWCluster Bracket

HY-CL10B: blackHY-CL1 0W: white

HY-CM1OB and HY-CM1OWWall / Ceiling Bracket• Weight 210 g• Dimensions (W x H x D)

48 x 100 x 108 mm• HY-CM1OB: black

HY-CM1OW: white t..>

Mounting Brackets for F-2000Series

Stand

HY-CM2OB / HY-CM2OWWall / Ceiling Bracket• For F-2000 Series• Weight 610 g• Dimensions (W x H x D)

84x 135 x 175 mm• HY-CM2OB: black

HY-CM2OW: white

ST-16ASpeaker Stand•Heightll3O...1660

mm

• Max. Load 6 kg• Colour: silver

Model F-2000B / F-2000W F-2000BT / F-2000WT F-2000BTWP / F-2000WTWP

System 2-Way, bass-reflex 2-Way, bass-reflex 2-Way, bass-reflex enclo5urePower Handling Capacity 60W (rated) /1S0 W (continuous program) 60W 60WTappings 100V - 60W / 30W / 15W / 3W 60W / 30W / 15W /3WLow Impedance 80 - -

Freguency Response 65 Hz -20 kHz 65 Hz -20 kHz 65 Hz -20 kHzCrossover Freguency 2.5 kHz 2.5 kHz 2.5 kHzSPL(1W,1 m) 92dB 92dB 92dBWater Protection - - lPx4Dlmen5ions (Wx H x D) 244 x 373 x 235 mm 244 x 373 x 235 mm 244 x 373 x 235 mmWeight 6.5kg 6.5 kg 7.4kg

TOA41

2n 235

Dispersion control

100’ oosgo, nam

Mounting Options

d \.,/

s[11jWIth daptOa0 octagooal 10,,

Optional Accessories

HY-CL2OB and HY-CL2OW

• HY-CL2OB: blackCluster Bracket

HY-CL2OW: white

/

Compact Satellite Speaker System

BS-301 B / BS-301W

• Consists of a set of4 satellite speakers and a subwoofer, which are induvidually fitted with itsown mounting brackets.• Available in two colours (black or white), which can be selected to suit the room interior• Compact and highly efficient in performance• The mounting brackets fitted onto the satellite speakers can be for 1 speaker or 2 speakerinstallations• Horizontal and verticle angles can be easily adjusted during installations onto ceiling orwails.

Mounting Brackets

Model 85-301 8/8S-301 w

Power Handling capacity Continous programme: 160w x 2 channels/Countinous pink noise: aow x 2 channels

Rated lmpedance 4flx2channelsSensitivity 81 da (1w, 1 ml x 2 channelsFreguency Response 40- 20,000 Hz x 2 channelsweight 13.9kg (excluding mounting bracket(Subwoofer Speaker component: 16cm cone-type / Finish: Front panel; A85 resin, enciosure; wood, Speaker bracket; steel plate

Dimensions: 210 (W( x 390 (H( x 563 (Dl mm / weight 11.5kg (excluding mounting bracket)

Satellite Speaker Speaker component: 8cm cone-type / finish: Enciosure, Front panel; HIPS resin, Speaker bracket; steel plateDimensions:_92_(W)_x_97.5_(H(_x_100_(D(_mm_/weight:_600g_(excluding_mounting_bracket(

Product Composition Subwoofer xl, Satellite speaker x 4Accessory Subwoofer mounting bracket (black or white( s4, rubber foot and fixing screw for subwoofer x 4

Subwoofer mounting screw x 1 set, Satellite speaker mounting bracket (black or white(Satellite speaker mounting screw and plain washer and spring washer x 1 set, Sticker for satellite speaker (black or white( x 8

42A TOA

3For satellite speaker

4,0

For Subwoofer

1’

Coaxial Array Speakers

HS-1 20B! HS-1 20W! HS-1 50B / HS-1 50W (300W)

HS-1 200BT! HS-1 200WT! HS-1 500BT! HS-1 500WT (60W high impedance! 100W low impedance)

• For mobile or fixed installation e.g. in clubs, banquet rooms or schools, etc.• Easy to carry and easy to install, with handle for easy transportability• Rubber feet for straight positioning• Can be used as a floor monitor• Twin input terminal connections (Speakon and screw terminals) for fixed and

mobile installation• WelI-controlled sound coverage: 90° horizontal x 40° vertical• HS-1 20/1200 series with 12’ LF speaker, HS-1 50/1 500 series with

1 5” LF speaker2-way unit system equipped with a large-diameter woofer and array tweeterSize and weight have been reduced thanks to the use of the array tweeterCompact and versatile design enables a broad range of applicationsMulti-purpose speaker designed for both permanent installationsand mobile PAA model with a built-in matching transformer, for use in high-impedanceapplications

• Colour black or white

Model HS-120B HS-120W HS-1200BT HS-1200WT

Speaker component (LF( 30cm (12”) cone-type 30cm (12”) cone-type 30cm (12’) cone-type 30cm (12”> cone-typeHF Balanced dome-type x 6 Balanced dome-type x 6 Balanced dome-type x 6 Balanced dome-type x 6Power Handling Capacity 100W (rated) 100W (rated) 60W (rated, high impedance) 60W (rated, high imped.)

300W (continuous program) 300W (continuous program) 100W / 300W (low impedance) 100W! 300W (low impedance)Rated Impedance (High> — — 70V! 100V 70V! 100V

(Low) 80 80 80 80Sensitivity 97dB (1W, 1 m) 97dB (1W, 1 m) 97dB (1W, 1 m) 97dB (1W, 1 m)Freguency Response 80- 20,000 Hz 80- 20,000 Hz 70- 20,000 Hz 70- 20,000HzDirectivity Angle Horizontal: 90° Horizontal: 90° Horizontal: 90’ Horizontal: 90’

Vertical: 40’ Vertical: 40’ Vertical: 40’ Vertical: 40’Dimensions (W x H x D) 361 x 448 x 320 mm 361 x 448 x 320 mm 361 x 448 x 320 mm 361 x 448 x 320 mmWeight 8.5 kg 8.5 kg 10kg 10kgFinish (Color) Black White Black White

Polypropylene Polypropylene Polypropylene Polypropylene

Model HS-150B HS-150W H5-1500BT HS-1500WT

Speaker Component (LE) 38cm (15”) cone-type 38cm (15”) cone-type 38cm (15”) cone-type 38cm (15”) cone-typeHF Balanced dome-type x 6 Balanced dome-type x 6 Balanced dome-type x 6 Balanced dome-type x 6Power Handling Capacity 100W (rated) 100W (rated) 60W (rated, high imped.) 60W (rated, high imped.)

300W (continuous program) 300W (continuous program) 100W! 300W >10w impedance) 100W! 300W (10w impedance)Rated Impedance (High) — — 70V! 100V 70V! 100V

(Low) 80 80 80 80Sensitivity 98dB (1 W,1 m) 98dB(1 W,1 m( 98dB(1 W,1 m) 98dB (1 W,1 m(Freguency Response 70 - 20,000 Hz 70 - 20,000 Hz 60 - 20,000 Hz 60 - 20,000 HzDirectivity Angle Horizontal: 90’ Horizontal: 90’ Horizontal: 90’ Horizontal: 90’

Vertical: 40’ Vertical: 40’ Vertical: 40’ Vertical: 40’Dimensions(WxHxD) 451 x56Ox400mm 451 xS6Ox400mm 451 xS6Ox400mm 451 xS6Ox400mmWeight 12kg 12kg 14kg 14kgFinish Black White Black White

Polypropylene Polypropylene Polypropylene Polypropylene

1 TOA43

Front View Rear View

Narrow directivity control, e.g. for stage application

Various Installation Options

Mounting brackets for Wall / Ceiling

HY-1500HB HY-1500HWBracket

ii

HY-J200HB HY-1 200HW

HY-1 500VW

iiHY-1 200VB

1HY-1 200VW

1IMounting Brackets for Ceiling

HY-C0801 * HY-C0801 W

Mounting Brackets for Wall

HY-W0801 * HY-W0801 W

/1

* in combination with HY-1 200/ HY-1 500 series brackets

44 d TOA

Stand Mounting

ST-34BSpeaker Stand

Compact Array Speakers

HX-5B / HX-5W (600 W)

HX-5B-WP / HX-5W-WP (600W)

FB-120B / FB-120W(600W)

• Innovative modular speaker design inciudes four preassembiedmodules with four LF drivers and twelve HF dome tweeters

• Adjustable dispersion angle to 60,45, 30 or 15 degrees• lmproved intelligibility through tailored coverage• In-line driver arrangement for superior vertical coverage control• Contoured waveguide-baifle for distortion-free coverage control• High power handling: 600W cont. (200W, pink noise)• Stack up to four units for improved coverage control• Lightweight polypropylene construction• Weather-resistant versions (HX-5B-WP / HX-5W-WP)• Parallel connectors - dual speakon and screw terminal• Vertical or horizontal mounting• Built-in surface-mount bracket• Colour: black (HX-5B / HX-5B-WP) or white (HX-5W /HX-5W-WP)

408

(D,

‘9

0

408

• Compact Subwoofer (30cm / 12”)• Ideal in conjunction with HX-5 speaker• Extremely wide frequency range• For floor-, wall-, corner- or ceiling-mount• 600W continuous program high-power subwoofer

system• Carry handle• For rigging

• Colour: black (FB-1 20B) or white (FB-1 20W)• Matching Rigging Frame:

HY-PF1 B (black) orHY-PF1W (white)

Model HX-5B HX-5W HX-5B-wP HX-5W-WP FB-120B/FB-120W

Enciosure Bass-reflex type Bass-reflex type Sealed type Sealed type SubwooferPower Handling Capacity Continuous pink noise: 200W, Continuous program: 600WRatedimpedance 80Sensitivity (1 W, 1 m) 96dB (60’ mode), 97 dB (45’ mode), 98 dB (30’ mode), 99 dB (15’ mode) 90 dBFrequency Response 70- 20,000Hz (—10 dB) (60’ mode) 95- 20,000Hz (—10 dB) (60’mode) 40- 1,200Hz (—10 dB)

75- 20,000Hz (—10 dB) (45’mode) 100- 20,000Hz (—10 dB) (45’mode)80- 20,000Hz (—10 dO) (30’mode) 105- 20,000 Hz (—10 dB( (30’mode(85- 20,000 Hz (—10 dB( (1 S’mode) 110- 20,000 Hz (—10 dB( (1 S’mode)

Crossover Freguency 4 kHz —

Directivity Angle Horizontal: 100’(over 2,000 Hz( Vertical: 60’(over 800 Hz(, 45’(over 1.2 kHz(, —

30’(over 1.6 kHz(, 1 5’(over 3.2 kHz) variableSpeaker Component Low freguency: 12cm cone-type x 4, High freguency: balanced dome-type x 12 30cm cone-type speakerWater Protection — — IPx4 (Instail with every speaker module downward) —

Dimensions (W x H x D) 408 x 546 x 342 408 x 546 x 342 408 x 546 x 342 408 x 546 x 342 408 x 408 x 450 mmWeight 16 kg 16 kg 16 kg 16kg 15 kg

TOA45

/S

• t

• /1

Mounting Accessories

For HX-5B:

T

For HX-5B-WP and HX-5W-WP:

4ST-34BSpeakerStand

HY-PF1B HY-CW1B HY-WM1B HY-WM2B HY-CN1BRigging Frame Ceiling Mounting Bracket Mounting Bracket Mounting Bracket Extension Bracket

for indoor use for indoor use for indoor use for indoor use for indoor use

For HX-5W:

J:.

HY-PF1W HY-CW1W HY-WM1W HY-WM2W HY-CN1WRigging Frame Ceiling Mounting Bracket Mounting Bracket Mounting Bracket Extension Bracketfor indoor use for indoor use for indoor use for indoor use for indoor use

HY-CN 1 W-WP HY-CN 1 B-WPExtension Bracket Extension Bracketfor outdoor use of for outdoor use ofHX-5W-WP HX-5B-WP

HY-CW1 WPCeiling Mounting Bracketfor outdoor use

HY-WM2WPMounting Bracketfor outdoor use

MT-200MatchingTransformer

HY-PF1WPRigging Framefor outdoor use

For HX-5 Series:

HY-STISpeaker StandAdapter

46

HY-WM 1WPMounting Bracketfor outdoor use

TOA

Line Array Speakers

SR-H2S / SR-H2L (180W)

SR-H3S / SR-H3L (360W)

SR-H2L SR-H2S

Optional Accessories

SR-H3L SR-H35

• Small Line Array with excellent directivity• Narrow 84 mm design allows speakers to fit in well with the

interior decor of the venue• 4 models enabling more extensive customization of the

listening area• Sync-Drive (Synchronous Nexus Control) technology create an

ideal linear sound source• Clear sound with reduced attenuation over distance• Speakers are reflection-free and feedback resistant• A unique aperture front grille structure enhances the horizontal

dispersion• Speakers are designed for optimally precise vertical directivity• Curved speaker models for improved vertical dispersion• Most applications are fully covered by single cabinet set-ups,

but up to two units can be connected* when an expandedvertical coverage area is suitable. (*Straight type only)

• Optionally available mounting brackets allow gap-freeinstallation of speakers on a wall, for an aesthetically pleasingappearance

• A wide variety of optional mounting brackets is available, forwalI-mounting, rigging, and stand mounting the Type Hspeakers

• Removable input terminal connectors for easy hook-ups• Optional matching transformer MT-S0301 for high-impedance

operation

SR-WB3Wall MountingBracket

SR-TB3Wall Tilt Bracket

SR-FB3Flying Bracket

SR-EP3

Extension PlateST-34BSpeaker Stand

b

SR-SA3

Stand AdapterMT-S0301

Matching Transformer

!Lj

Model SR-H2L SR-H2S SR-H3L SR-H35

Enciosure Bass-reflex typePower Handling Capacity Continuous program: 180W Continuous program: 360WRated Impedance 8 OhmSensitivity 92 dB 90 dB 95 dB 92 dB

(1 w, 1 m eguivalent, measured at 4 m) (1w, i m eguivalent, measured at 8 m)Freguency Response 80—18,000 Hz (-10 dB) 90— 17,000Hz (-10 dB) 110— 18,000Hz (-10 dB) 90—17,000 Hz (-10 dB)Directivity Angle Horizontal: 90’ Horizontal: 90’ Horizontal: 90’ Horizontal: 90’

vertical: 0’ Vertical: 20’ Vertical: 0’ Vertical: 20’

(within the range of speaker height) (within the range of speaker height)Speaker Component 7cm (2.8”> cone-type x 9 7cm (2.8’) cone-type x 16Input Connector Removable input connectorFinish Enclosure MDE, white, urethane paint

Front grille: Punched steel plate, white, acrylic paintDimensions(WxHxD) 84x668.4x115 mm 84x663.4xll5mm 84x1186.4xll5mm 84x1177.2x 157mmWeight 4,4kg 4.2kg 7.6kg 7.9kg

d TOA47

Conference Systems

Infrared Conference Systems

TS-800 Series / TS-900 Series

• For efficient communications in each kind ofconference

• System with voting function (TS-900) orstandard system (TS-800)

• Safe and secure infrared wireless technology• Compact and Iightweight chairman and

delegate units• Up to 96 active units (TS-900) or 64 active

units (TS-800) per system• No cabling makes installation easy• Chairman unit features a priority speech key• Speaker restriction function• Auto Mic-Offfunction• Installation status checkup function• Conference control software available

TS-900 Series System Example

48

dTOA

S •

InfraredTransmitter/Receiver unit

TS-905

/L.......,/tiaPanetemnt&Pretation)(Engli5h interpretation)

DeIe\

Audience

TS-900 Series

Chairman’s Unit

TS-902

Delegate’s Unit

• 2 channels for 2 languages

• For bilingual conferencing and voting with

triple choice vote function

• For efficient communication in each kind of

conference

• Conference control software available

• Safe and sure infrared wireless technology with

good coverage

• Compact and lightweight chairman and

delegate units

• Up to 96 units per system

• No cabling makes installation easy

• Chairman unit features a priority speech key

• Speaker restriction function

• Auto mic-offfunction / installation status

checkup function

• Improved security from eavesdropping or

annoying crosstalk

• Flexible and easy configuration in different rooms

and with varied participant numbers

• Exceptional sound quality

• Attractive unit equipped with mic (removable),

speaker and priority switch

• 2 different versions for chairman (TS-901) and

delegates (TS-902)• 3 voting keys

• Channel selector for conference language

• When the speaker is on, the mic of this unit is

automatically turned off to avoid feedback and

vice versaTS-901

• i recorciing output

• Ring shaped in-use LED

• Multiple chairman’s units can be operated

simultaneous

• Priority speech for chairman’s unit

• Easy hook-up

Model TS-900 T5-901 TS-902

Power Reguirements 220/230V AC, 50 / 60 Hz (selectable) 7.4V DC (battery) or 9V DC (option. AC adapter AD-091 0)Power consumption Max. 72W 270 mAInput Mic: 6000, -60 dBV, AUX: 10 kO, -20 dBV, Microphone terminal: combined type of XLR-4-31 (dedicated

unbalanced, phone jack, for connecting the optional TS-903 or T5-904)Output Recording; 10 k0, -20 dBV, unbal., phonejack, RCA pin jack Monitor speaker: 80,0.2W, Headphone: 2 x Mini jack

control Speaker restriction can be set to 1,2 or 4 Speech button, priority button Speech buttonMic off function; off, 20 sec., 40 sec., (selectable) 3 voting buttons 3 voting buttons

Speach priority selectorExternal control Terminal D-sub connector (9 P, male) —

Noot Connectable IR Units 4 lTS-905 / TS-907, up to 16 units by using 4 x YX-1 024) —

No of Connectable Units Max. 96 (T5-901 and 902) —

Dimensions (WxHxD) 359 xl 18.8 x 179.8 mm 210 x 65.9 xl 52 mmFinish Panel: Surface-treated steel plate, grey metallic paint, semi-gloss Top panel: ABS resin, grey metallic, paint, semi-matte

Weight 2.8 kg 640 gAccessory AC adapter (cord length: 1.8 m DC cord + 2 m detach. AC cord) —

Option Microphone:TS-903 /TS-904

1TOA49

TS-900

Central Unit 359

ir,u

pi1:.••sE I

TS-901

TS-800 Series

Chairman’s Unit

• Conference control software available• Compact and lightweight chairman and

delegate units• Up to 64 active units per system• No cabling makes installation easy• Chairman’s unit features a priority speech key• Speaker restriction function

• Auto mic-offfunction

• Installation status checkup function• Very good coverage of transceivers• lmproved security from eavesdropping or

annoying crosstalk• Flexible and easy configuration in different rooms

and with varied participant numbers• Exceptional sound quality• Audio input from a wired microphone or other

sound source• Colour: Panel grey metallic

TS-802

Delegate’s Unit

iiitis

• Attractive unit with optional mic (removable),speaker and priority switch

• 2 different versions for chairman (TS-801) anddelegates (T5-802)

• When the speaker is on, the mic of thisunit is automatically turned off to avoid feedbackand vice versa

• One recording outputTS801

• Ring shaped in-use LED• Multiple chairman’s units can be operated

simultaneously• Priority speech for chairman’s unit• Easy hook-up

Model T5-800 TS-801 TS-802

Power Reguirements 220/230V AC, 50/60 Hz (selectable) 7.4V DC (battery) or 9V DC (option. AC adapter AD-091 0)Power consumption Max. 72W 270 mAInput Mic: 6000, -60 dBV, AUX: 10 ko, -20 dBV, Microphone terminal: Combined type of XLR-4-31 (dedicated

unbalanced, phonejack, for connecting the optionalT5-903 orTS-904)Output Recording; 10 Ml, -20 dBV, unbal., phone jack, RCA pin (ack Monitor speaker: 80, 0.2W. l-lead hone: Mini jack x2Control Speaker restriction can be set to 1,2 or 4 Speech button, priority button Speech button

Mic off function; off, 20 sec., 40 sec., (selectable)Speach_priority_selector

External Control Terminal D-sub connector (9 P, male) —

No of Connectable IR Units 4 (TS-905 /TS-907, up to 16 units by using 4 x YX-1 024) —

No of Connectable Units Max. 64 (TS-801 and 802) —

Dimensions (WxHxD) 359 xl 18.8 xl 79.8 210 x 65.9 x 152Finish Panel: Surface-treated steel plate, grey metallic paint, semi-gloss Top panel: ABS resin, grey metallic, paint, semi-matteWeight 2.7 kg 630 gAccessory AC adapter (Cord length: 1.8 m DC cord + 2 m detach. AC cord) —

Option Microphone:TS-903 /TS-904

501TOA

TS-800

________________________________

Central Unit hm

—

1

-

- —•.:-—-

0 o-

S S

359

flL

TS-80 1

TS-800 Series System Example

Standardrnicrophone

TS-903

Chairman unitTS-801

Int raredTransmitter/Receiver unit

TS-905

Up to16 units

Up to 64 units *Chairman and Delegate units require Iithium-ion battery BP-900 or AC adapter AD-OSlO.

Accessories for TS-800 Series and TS-900 Series

For chairman’s unit anddelegate’s unit ACoperation

For up to 8 BP-900 Lithiumlon Batteries (optional) tobe simultaneously chargedwithin up to 5 hours

TK-906A / TK-908A

Carrying Cases

BP-900

Lithium-lon Battery

• TK-908A: Carrying case for8 units, 2 transceivers battery charger, batteries andm icrophon es

• TK-906A: Carrying casefor center amplifier, 6units, 1 transceiver, battery charger, batteries andm icrophon es

• For chairman’s unit anddelegates units

TS-903 (short) ITS-904 (long)

Microphones

MB-TS900

Rack-mount Bracket

• Electret condenserm icrophones

• Applicable to bothchairman’s unit anddelegates unit

• TS-903: 368 mm longTS-904: 518 mm long

TS-905 / TS-907

Infrared Transmitter / Receiver Units

• TS-905 with 1 500 (vert.)x 360° (hor.) receptionangle

• TS-907 with 90° (vert.)

x 360° (hor.) receptionangle

YW-1 022 / YW-1 024

Distributor

TOA

• YW-1022(to 2 outputs)

• YW-1024(to 4 outputs)

51

Secretariat

InfraredTransmitter/Receiver

Sound source equipment

TS-800 DistributorYW-1 024

Chairman Delegate

Long microphone Long microphoneTS-904 TS-904

. .. . . .

Delegate unit— Delegate unitTS-802 TS-802

YW-l 024

AD-091 0

AC Adapter

BC-900

Battery Charger

TK-906A

Compact wired conference system with a capacity

of up to 210 units. Remote participation via phone

or internet is possible. Clear sound, easy set up and

convenient storage are self understanding.

• Supplies DC Power to all units,

with lamp indicator

• Jack for microphone input, and AUX input• Microphone, AUX, line (for conference unit’s

built-in speaker) and chime (on chairman’s unit)volume controls

• Delegate’s unit simultaneous operation (1,3, or

6) and automatic mic-off setting (OFF/20-sec/40-

sec) switches

• Line 1 & 2 output connection terminals each for35 conference units.

• Equalizer Input• System expandable to 210 units by connection of

3 central units (70 units per central unit)

• Built-in speaker• A ring-shaped LED on the optional microphone

indicates that the microphone is on• To prevent howling, the built-in speaker is turned

offwhile the microphone is on• Press-to-talk priority speech button activates

chime and overrides delegate’s unit (TS-771 only)• Press-to-talk button• Recording output mini-jack for connection to a

recording device

• Multiple simultaneous chairman’s units operation

possible

• 8P quick-lock type mini-DIN socket

• Long or short gooseneck microphone (optional)

Wired Conference Systems

TS-770

Central Unit

Li

TS-771 TS-772

Chairman’s Unit Delegate’s Unit

TS-771 with optionalmicrophone TS-773

TS-772 with optionallong microphoneTS-774

Model TS-770 TS-771 1 T5-772

Power Reguirements 220 / 230V AC, 50/60 Hz (selectable) 35V DC, under 30 mA supplied from central unit

PowerConsumption Max.60W —

Input Mic: 6000, -60 dBV, AUX 1:10 k0, -20 dBV, —

unbalanced, phone jack,Output Recording; 10 k0, -20 dBV, unbal, phonejack, 2x pin jack Recording: 10 kO, -20 dBV, unbalanced, mini jack

Internal speaker: 1300, 200 mW, headphone: 320contact_output: 24V_DC,_max_50_mA_(open_collector output)

Control Speaker restriction can be set to 1,3 or 6 / automatic Speech button, priority button Speech buttonmic-offfunction; off, 20 sec., 40 sec., (selectable) chime button

Number of Connectable Max. 70 units perT5-770 / max. 35 units per line — —

Conference Units (max. 210 units with 3 xTS-770lDimensions 1W x H x D) 210 x 107.1 x 316 mm 114.5 x 78.4 x 152.9 mmFinish Case: Pre-coated steel plate, black, 30% gloss, aluminum panel Case: ABS raam, black; panel: gray metallic, semi-gloss paint

Weight 4kg 780 gStandard Accessories Power cord x 1 —

Option Extension cable: YR-770-2M /YR-770-1 OM Microphone: T5-773 /TS-774

52 —

TOA

TS-775

Remote Delegate Interface

160

;

___

100

• For connection of external delegates via

telephone, IP telephone (up to 70 PCs

per TS-770) mobile phone

• Speech method selectable

• Handset connector on the front

• Handset type selectable

• Control output

• Line input for other conference units

Model TS-775

Power Supply 35V DC (suppiled from optional center amplifier)Current Consumption < 30 mAInput -60 dBV, 2000; balanced; mini phone jack with VR controlOutput -60 dBV, 220; balanced; mini phone jack with VR controlspeech Method Auto: Voice-activated automatic switching,

Manual: Talk-key activatedOperating Temperature O’C to + 40’C

Operating Humidity Under 90% RHFinish Pre-coated steel plate, blackDimensions (W x H x D) 160 x 41.8 x 100Weight 700 g

For connection of a TS-770

expansion amplifier or the

connection of two conference

units. 8 pin DIN socket / DIN

plug. 2 m (YR-770-2M) or

10 m (YR-770-1 OM) long

TS-773: 368 mm

TS-774: 518 mm

The microphones fit both:

chairmans and delegates unit

Accessories for TS-770 series

TK-776 /TK-778

Carrying and Storage Case

TK-778

YR-77O-2M / YR-770-1 OM

Extension Cables

TK-776: for 1 Central Unit, 8 Units

and the cables.

TK-778: for 12 Units and the

cables

TS-773 /TS-774

Microphones for TS-771 and TS-772

1TOA53

TS-770 Series System Example

TS-770 Central Unit

54 d TOA

TS-771 Chairman’s Unit TS-772 Delegate’s Units

Max. 70 units per Central Unit

TS-775 Remote DelegateInterface Unit

Telephone Body

TS775 Remote Delegate

TS-770 Central UnitTelephone

PC

Megaphones

Hand-held Megaphones

______

ER-520 / ER-520W / ER-5205 (10W)

• Compact, Iightweight megaphone withinstant-on amplifier and howl-free dynamicmicrophone with press-to-talk (PTT) switch

• Operates on 8 R6 type (AA) batteries• Horn and enciosure from ABS resin• Horn: white, strap black, others grey• ER-520W with built-in whistle• ER-520S with siren, horn red

• The ER-1 206W is a compact splash-proofmegaphone rated at 6W output.

• Operates on 6 R6 type (AA) batteries• features IPX5 water-jet-resistant designs• ER-1 206W with built-in whistle• ER-1206S with siren, horn red

Model ER-520/W/S ER-1 206/WIS

Power 10W 10W

Signals -/Whistle/Siren -IWhistle/SirenAudible Range (Voice) approx. 250 m approx. 250 mBatteries 8x 1.5V(AA) 6x 1.5V(AA)Battery Life (Hours) 10 8Witi, Signal -/30min/40min -

Dimensions 160 x 256 x 260 mm 154 x 266 x 250 mmWeight (Without Batteries) 620 g 660 g

ER-1215 / ER-12155 / ER-3215 (23W)

• Compact, lightweight megaphone withinstant-on amplifier and howi free dynamicmicrophone with press-to-talk (PTT) switch

• Operates on 6 R14 type (C) batteries• Sanitary antibacterial treatment• Horn: white; strap black; others grey• ER-1 2155 with built-in siren• Enclosure: red (ER-1 2155); horn: light grey;

other: grey

Model ER-1215 ER-1215S ER-3215 ER-1203

Power 23W 23W 23W 4WSignals - Siren - -

Audible Range (Approx.) 315 m 315 m (50Dm siren) 400 m 125mBatteries 6x1.5V(R14) 6x 1.5V(R14) 6x1.5V(R14) 4X 1.SV(R6)Battery Life (Hours) 14 14 9 8With Signal - 20 min. - -

Dimensiorrs 1W x H x 0) 210 x 291 x 346 210 x 291 x 346 210 x 291 x 381 137 X 257.8 X 210Weight (Without Batteries) 1.1 kg 1.2 kg 1.3 kg 0.61kg

TOA55

ER-1206 ER-1206W ER-1206S

;) zz

1ER-1215 ER-12155

ER-3215 ER-1 203

Shoulder Type Megaphones

ER-2215 / ER-2215W (23W)

ER-2215

ER-2230W (45 W)

• Power megaphone with instant-onamplifier and hand held howl freedynamic microphone with press-to-talkswitch

• ER-221 5W with whistle• Operates on 6 Ri 4 type (C) batteries• Sanitary antibacterial treatment• Colour: off-white

• Power megaphone with instant-onamplifier and hand held howi freedynamic microphone with press-to-talkswitch

• ER-2230W with built-in whistle• Operates on 6 R14 type (C) batteries• Sanitary antibacterial treatment• Colour: off-white

• Compact megaphone with hand-heldhowi free microphone

• Connection of microphone headset(optional WH-4000A/4000H) orhand-held microphone possible. Forstand mounting, eg. on ST-16A

• Aux input, e.g. for CD• Operation with 12V adaptor (optional)

or battery• Enclosure: white; strap: black

Model ER-2215 ER-2215W ER-2230W ER-2930W

Power max. 23W 23W 45W 45W

Signal - Whistle Whistle Whistle

Audible Range Approx. 400 m Approx. 500 m (whistle) Approx. 1000 m (whistle) Approx. 1000 m (whistle)

Batteries 6 x 1.5V (R1 4) 6 x 1.5V (R1 4) 10 xl .5V (R2OP)/ext. 12V adapter 1 0x1 .5 V(R2OP)/ext. 12V adapter

Battery Life 9h 9 h/Signal 20 min. 17 h/Signal 1.5 h 17 h/Signal 1.5 h

Dimensions 0 210x 336 0 210 x 336 0 351 x 512 0 351 x 512

Weight (Without Batteries) 1.2 kg 1.3 kg 3.75 kg 3.95 kg

Optional Accessories

WM-5225/ WM-5325UHF microphonesfor ER-2930W

WM-3210 /WM-3310VHF microphonesfor ER-2930W

WTU-4800Tuner module forER-2930W

ST-16AStand for shouldertype megaphones

WTU-3800Tuner Module forER-2930W

56 A TOA

ER-2930W (45 W)

TECHNICAL COLUMN

MICROPHONES

Wiring of Microphones

Output from a microphone is rather weak; therefore it is importantto use shielded cables for microphones to prevent line noise.Thelow impedance shielded cable intended for microphones arecommercially available. The shielded cable is generally used totransmit the audio signals from microphones ( -70 dB / 0.3 mV)or source equipment (0 dB / 1 V).

Balanced and unbalanced type

Idcablec0M0r(single core) ground

Unbanced mrophoee plug

ldcablecOMOrH0............(double core( ground

Balanced microphone plug

Balanced and Unbalanced OutputThere are two kinds of output from a microphone: balanced andunbalanced. With balanced output, the audio signal appearsbetween the hot (on-going audio signal) and cold (return audiosignal), which are both independent of the ground. With unbalancedoutput, the audio signal appears between the hot and ground(connected to the cold). The connection between balanced outputand balanced input (on the amplifier side) is virtually unaffected byexternal line noise, and it is used for wiring between long distances.Double-cored shielded cable is used for connecting.

balanced outputs, and single-cored shielded cable is used forconnecting unbalanced outputs

(a) Balanced Mrophonecord

ConnectionMrophone - (double-cored shieed cable) - Arnphfler

HOT HOT

+ L

____________

‘lGl I?()Connection to mbrophone body

(b) Unbalanced Microphonecord

ConnectionMicrophone -

- llsinge-cored shielded cable) —t<----— Mrpdfier - -

HOT

COLD CD

9LGL

1 Microphone Cod 1Microphone Output Amplifier Input Extension Distance 1

Unbalanced Unbalanced 1 20 m 1Balanced Unbalanced 1 20 m 1Balanced Balanced 8Cm

Speakers

Rough guide for noise levels and audio levelsnecessary for loudspeaker (for all types of speakers)

Noise levels are expressed in decibels (dB). Below are sometypical examples..

When transmiffing voice or music through a speaker, t isnecessary to transmit at a level that is higher than the ambientnoise level. In the case of voice transmission, t should betransmitted at a level 5 to 10 dB higher than the noise level,background music 3 to 5 dB higher, and foreground music 15 to 20dB higher.

Computation of Intensity of Sound

As an index to express the intensity of sound from a speaker,sound pressure level (in dB) is generally used. The soundpressure level rises as the electric input to the speaker increases,and falls as distance from the speaker increases. This relationshipis shown by the following formula:

Attenuation of SPL Amount of increase ofSPL(dB)= SPL)lWilm, - +due to drstance SPL due to electric Input

The SPL (1 W / 1 m) indicates the sound pressure level at a point1 meter away from a speaker when an electric input of 1 W isapplied to that speaker. This is used to express comparativespeaker efficiency, such as in a catalog.

Amount of 6.0 14.0 20.0 23.5 26.0 29.5 32.0 35.6 38.1 40.0attenuation (dB)

lncrease of SPL due to electric input(amount of increase =1010gw W: electric input)

Electricinput(Wij 1 1.5 1 3 5 6 10 15 20 30 50

• Example of calculation:

4.8 7.0 7.8 10 11.8 13 14.8 17

The SPL(1 wil m) of the model TC-1 54SM is shown as 112 dB. The soundpressure level of this model at distance of 10 meters with an input of 10W canbe calculafed as follows according to the above table:

SPL=ll2dB-2OdB(lOm)+lOdB(1OW)=lO2dB

Arrangement of Speakers in a General Office(Ceiling Speakers)

Ceiling-mounted speakers are generally used and their coverageangle is between 90 and 120 degrees. The smaller the distancebetween speakers, the better the sound quality and the more eventhe sound volume. The following table shows the area that can becovered by one speaker.

TOA

Unedlenceinput

Signal-*

Balancinput Distance of Extension for Microphone Cords

The following table shows the maximum extension distance formicrophone cords. When distance extends beyond the followingfigures, excessive noise will make the microphone impractical, andtherefore It will be necessary to use a microphone mixer to boostthe signal level to minimize the influence of noise.

Noise level (dB)

11Inside a

________________

movie theatre 1Normal ofice,

________________

restaurant, 1hotel lobby Noisy office,

________________

departrnentstore, 1super market Pdnting plant 1

Reauy- industry plant

1 Must ralie 1 MustveiljustGen be understood speaking ina normal voice 1 one’svolceto 1 tobeunderstoodi

Attenuation of SPL due to distance(amount of attenuation = 20 log 0

Distance(m) 2 5 10

0: distance in meters from speaker)

15120130 140160180 1100

Amount ofincrease (dB) 0 2.6

•TECHNICAL COLUMN

Purpose Height of ceiling Distance between Area of coveragespeakers of one speaker

Less than 2.5 m 5 m About 25w2Background Music 2.5 - 4.5 m 6 m About 36 m2

4.5-15m 9m About8l m2Announcement 9 f012 m 81 to 144 m2

For general office use not to inciude background music, speakersshould be arranged about 9 to 12 meters apart. Shown below isan example of speaker arrangement in a 30 m x 20 m office withceiling height of 3 m, which indicates that this oftice requires about6 speakers.

Example of arrangement

0 :0

..4. .

..:..

0 0 01

3Dm ‘.1

Arrangement of Speakers in a Factory (Horn Speakers)Factories with high noise levels generally use horn speakers,which can produce high levels of sound. 1f you know where theworking stations are located speakers can be arranged accordingly1f the location of the work stations is unknown, speakers shouldbe arranged in accordance with the floor space.Here is an example of a 40 m x 90 m room in a factory with a noiselevel of 85 dB. In this factory, TC-61 5M speakers are installed;therefore, the sound pressure that can be obtained at a point 20meters away with electric input of 15 W will be:[ll2dB(1 Wil m)-26.OdB(20m)÷1.8dB(15W)}=97.8dB

This is a sufficient sound pressure level, 10 dB higher than thenoise level. The speakers are installed 20 to 30 meters apart, and6 speakers can generally cover the area. The sound pressure levelnear speakers is rather high, so it is necessary to install thespeakers at a height of more than 4 meters.

—

_______________________

rxE15W.’

415m 30m 9Cm 3Cm r 15mb

Speaker WiringFor speaker connections, use 600V vinyl (PVC) insulated wire of1.2mm to 1.6mm in diameter (AWG17t0AWG 14)

Amplifiers

High-Impedance Connection and Low-ImpedanceConnection

The PA amplifiers generally come with low-impedance speakeroutputs (indicated as 4 2, 8 Q, 16 Q, etc) and high-impedanceoutputs (indicated as 70V, 100V, etc). Low-impedance output isused when a small number of speakers (1 to 4) is used and thereis a short distance (1 0-some meters) between amplifiers andspeakers. High-impedance output is used with a large number ofspeakers and a longer distance of wiring. Speakers withtransformers are used for high-impedance output. For a PAsystem: high impedance connection should be used if possible, inconsideration of wrong speaker connections and transmissionefficiency.

• Example of low-impedance connection:It is necessary to design the total speaker inpuf impedance to be larger than theamplifier output impedance. When the total speaker impedance is lower than theamplifier output impedance, unstable operation or amplifier malfunction may result.The wiring distance between amplifier and speaker should be Iess than 1 0-somemeters. It the wiring distance is greater than this, the output power from the amplitierwill be consumed as heat in the cables, and not be able to supply the speaker withsufficient power.

40-1

1Output otspeakers 80 lXJ 8fltj(J - +

• Example of I-Iigh-Impedance Connection:

In a PA system to cover a large area, the wiring distance will be greater, so highimpedance connection is used predominantly. In high.impedance connection, allspeakers (each with a transtormer) will be connected in parallel. Avoid using thesespeakers together with those without transtormers.

In high-impedance connection, as long as you have parallel connection. It will besufficient to design the total speaker input to be lower than the amplitier Out put, andthis will help eliminate complex impedance calculation.

10W 10W 1 10W

lOOVOutput c160W lVtre) 1erVr 1V8n

• Afl1pl80UtXit • Tckd’icecfspealeasknce

1100(V)2 1 1 1 1 1Z--183(0)

1.7k(0) 1.7k(Ol 1.7klol 330(0) 330(01

58

— Amplifler output 120W> total speaker input (78W)

1TOA

Arrangement of SpeakersDistance between s ker/////////////// ///2

Height of celling

Area of Cwerage of one speaker

0ffice of 30 m x 20 m with 3 m ceilingwithout music

Number of speakers necessary: 6 to 8

ut40

• Speakerinputewpedance(WMII100VIk,e)

z0()2

1 kQ

• eroulput • Total impedanceofimpedance

100(V)2 Z 167()

= 60(W)157 _L + _L + —1— + _L + ._L + _L

1 k(O) 1 k(O) 1 k() 1 k(fl) 1 k(t2) 1 k(2)

Axnphfleroutput6oW total speaker input (60W’)

Even when connecting speakers with different inputs, there will be no problem aslong as the total wattage of the speakers does not exceed the amplitier output.

Total impedance 8 601H- 1+..

,c cflOutput ofspeakers 1H - Ie80 l 80 ct(1

Ic Ic

1 6W 1 6W 1 1 30W 1 30W1.7kOLH A1.7ld3E!1 A 1.7kflLt ..1 33 Lfr,i330QLf1ri

OVOutput (6wIr—1 611-J pw,ri peir-1 çeerrleVee ive,eiI ieveiI ieriI eeviejI

80= 11

180+8OOQ

+80

128(0)

Application Example 1

S u pe rm a rket

______________ _______________________ _________

Cashier

© © © ©__©fl©

_______

L]EI

____

Deposit Cou nIer

© ©

PM-660

___________

Factory

CDH

A-2060

Ceiling Speakerx 18

Ceiling Speaker x 1 (Office)

© Ceiling Speaker

GE- SC-615M

.0 AT-12UP/AT-5OUP

D EC-1 OOM or PM-660

l

1) Meeting room

• Music distribution during recess• Announcements with chime• Selectable paging area

10W SC-615M x 8 (Hall)

1,5W Ceiling Speakerx2(Office)

1,5W Ceiling speaker x 1 (Meeting Room)

1,5W Ceiling speaker x 4 (Canteen)

10W SC-615Mx3 (Outdoor area)

59

43 m

© © © ©Office

©0

Warehouse

0 AT-12UP0 PM-660

© Ceiling SpeakerA-2060

20 m

• Background music• Announcements / paging from the office• Volume control for the office

ÔÔRE JI-:- w

1.5 W

35 m

o ci

O 0 0 ci 0 0 Office

0o 0 ci ci 0 0

ci 0 0 0 ci ci

0ci ci ci ci ci

Outdoor area

o oCanteen0 0

0

TN’

25 m

—z

PM-660

TOA

Application Example 2

OFFICE

Executive Offices

9 © © © ©

E E E©E ©

EE DEED

___

©

OfficeArea

• Emergency paging possible (5 m distance among the speakers)• Announcements with chime from the reception• One speaker for each room• Individual adjustment of the volume in each office room

Ceiling Speakers

Volume ControlAT-12UP 0 AT-I2UP AT-12UP 0 AT-12UP AT-12UP

1 5 W 1 5 W 5 W 15 w w

x2Meeting room

- 0 AT-12UP© Ceiling Speakero EC-100M

F-2000BTA-2120 and A-2060

• Good Sound Quality• Wireless Microphones for the Instructor• Announcements from the reception

F-2000BT x 4Gymnastic Area

Ceiling Speaker x 11Changing Room / Resting Area

Ceiling Speaker x 2Reception

30 m

©

MeetingRoom

©

Ceiling Speaker

—AT-12UPEC-100MA-2030

16m

aDft

rjL___ ©Reception

A-2030

EC-1 OOM

GYMNASIUM

xl x6Reception one per office

x7Staff area

20 m

WM-5320A

AerobicsMicrophone

CD / Cassette

Cassette

A-2060 3W 3W

EC-l OOM

60TOA

Application Example 3

• Good Sound Quality• High Sound Level• Selectable Source Routing

4xF-2352C

Dining Area

2 x HB-1

Main Bar

4xF-2000BT

Function Room

8 x F-2000BT

Main Bar

• Good Sound quality• Even Sound Distribution• High Sound Level• Wireless microphones for Free Movement

1 x SR-H3S

1 x SR-H35

Public House30 m

wHB-1

F-2000BT

F-2352C

DA-250FH

M-9000

EQ

DA-250FH

House of Worship3Dm

‘

RI

EÜÜüüLDEgggggggg

3:i SR-H3SDA-2SOFH

M-9000

E0

DA-250FH

1TOA61

INDEX

A DA-500FH 21 G MB-1 5B 9 SR-TB3 47 WM-5325 8,56DA-550F 21 MB-25B 16,17,18 SR-WB3 47 WM-5325A 8,12

A-1706 18 DM-1100 G5-302 40 MB-36 20 ST-16A 28,41,57 WM-5325H 8,12A-1712 18 DM-1200 4 MB-TS-900 51 ST-321B 7 WS-5200 10A-1724 18 DM-1200D 4 MB-WT3 9,14,15 ST-322B 7 WS-5300 10A-1803 17 DM-1300 H MB-WT4 9,14,15 ST-34B 44,46,48 W5-5300H 10A-1806 17 DM-1500 H-1 MT-251H 20 ST-506 7 WT-3800 11A-1812 17 DM-524B H-2 MT-50301 48 ST-507 7 WT-3810 11A-2030 16 DM-5245 H-2WP 37 ST-65A 7 WT-4820 9A-2060 16 5T-66A 7 WT-5800 9H-3 37A-2120 16 E ST-73A 5 WT-5805 9,13H-3WP 37 P-1812 17A-2240 16 SV-200M 20 WT-5810 9AC-120 EC-100M 6 HB-1 37,42 P-2240 17

WTU-3800 11,56AD-0910 51 EM-410 H5-1200BT 43 PC-1867F 26 T WTU-4800 9,56AD-246 15 EM-600 5 H5-1200WT 43 PC-1867FC 26

AN-OO1T 25 EM-700 H5-120B 43 PC-1869 25 T-OOiT 24

AN-9001 25 EM-800 HS-120W 43 PC-18695 26 TC-615 32

AT-063P 36 ER-1 203 55 HS-1 500BT 43 PC-2369 25 TC-61 5M 32,34 YM-1 21 7

AT-12UP 36 ER-1 206 55 HS-1500WT 43 PC-2668 26 TC-631 32 YP-M101 12

AT-12UPR 36 ER-12065 HS-150B 43 PC-2852 25 TC-631M 32 YP-M301 12

AT-303P 36 ER-1206W HS-150W 43 PC-2869 25 TC-651M 33 YP-M5300 8

AT-5OUP 36 ER-1215 HX-5B 45 PC-3CL 26 TH-650 35 YP-M5310 8

AT-5OUPR 36 ER-12155 HX-5B-WP 45 PC-3WR 25 TH-660 36 YR-770-1OM 53

AT-603P 36 ER-2215 56 HX-5W 45 PC-5CL 27 TK-776 53 YR-770-2M 53

ER-2215W 56 HX-5W-WP 45 PC-648R 25 TK-778 53 YW-1 022 14,51

B ER-2230W 56 HY-1200HB 44 PC-658R 25 TK-906A 51 YW-1024 14,51

ER-2930W 56 HY-1200HW 44 PE-304 29 TK-908A 51 YW-3500 11BC-900 51 ER-3215 HY-1200VB 44 PE-64 29 TS-770 52 YW-4500 9BP-900 51 ER-520 HY-1200VW 44 PGW-6 36 TS-771 52

zBS-1030B 27 ER-5205 HY-1500HB 44 PGW-6R 36 TS-772 52BS-1030W 27 ER-520W HY-1500HW 44 PJ-100W 30 TS-773 ZM-104A 36BS-1034 27 EV-200 20 HY-1500VB 44 PJ-200W 30 TS-774 ZM-9001 24BS-1034S 27 EV-20R 15 HY-1500VW 45 PJ-304 30 TS-775 ZM-9002 24BS-1110 27 HY-AH1 39 PJ-64 30 TS-800 50 ZM-9003 24BS-1120 27 F HY-BC1 39 PM-120 6 TS-801 50 ZM-9011 2485-301 42 HY-BH1OB 41 PM-2OEV 15 TS-802 50 ZM-901 2 24BS-633A 28 F-1000B 40 HY-C0801 44 PM-222 6 TS-900 49 ZM-9013 24BS-633AT 28 F-1000BT 40 HY-CO8O1W 44 PM-660 6 TS-901 49 ZM-9014 24BS-634 28 F-1000BTWP 40 HY-CL1OB 41 PM-660D 6 TS-902 49 ZP-OO1T 24BS-634S 28 F-1000W 40 HY-CL1OW 41 PM-660U 6 TS-903 51BS-678 28 F-1000WT 40 HY-CL2OB 41 PS20D630 33 TS-904 51BS-678B 28 F-1000WTWP 40 HY-CL2OW 41 TS-905 51BS-678BT 28 F-122C 38 HY-CM1OB 41 R TS-907 51BS-678T 28 F-1300B 40 HY-CM1OW 41 TU-631 35RM-200M 20BS-680F 28 F-1300BT 40 HY-CM2OB 41 TU-631M 35RM-210 20BS-680FC 28 F-1300BTWP 40 HY-CM2OW 41 TU-651 35RU-2001 7

F-1300W 40 HY-TB1 39 TU-651M 35RU-2002 7C F-1300WT 40 HY-TR1 39

F-1300WTWP 40 HY-W0801 44 5 UC-OO1T 24 F-15225C 39 HY-Wo8oiW 44 UP-MV-206 36CA-107 22 F-2000B 41 SC-610 34CA-115 22 F-2000BT 41 1 SC-610M vCA-130 22 F-2000BTWP 41 SC-615 34CA-160 22 F-2000W 41

IR-200BC 12 SC-615M 34 VM-2000 19CA-207 22 F-2000WT 41

IR-200BT-2 12 5C630 34CA-407 22 F-2000WTWP 41

IR-200M 12 SC-630M 34 W

CS-154 31 F-2322C 38IR-300M 12 SC-651 WA-1822 10

CS-304 31 F-2352C 38IR-500R 14 SP-410 28 WA-1822C 10

CS-64 31 F-2352SCIR-510R 14 SP-420 28 WD-4800 9

F-2852C 38IR-520R 14 SREP3 WM-3210 11,56D FB-100IR-702T 12 SR-FB3 WM-3220 11

FB-120BIR-700D 14 SR-H2L WM-3310 11,56D-OO1T 24

FB-120WIT-450 20 SR-H25 ‘‘ WM-3310H 11DA-250D 20

DA-250DH 20 M SR-H3L 47 WM-5225 8SR-H3S 47

DA-250F 20 WM-5270 8M-9000M2 23 SR-5A3 47

DA-250FH 20 WM-5265 8

© TOA Corporation (UK) Ltd.( Ro H Specifications are subject to change without prior notice.

(0909) 833TEEC200 . Compliant Errors excepted.62 —

d TOA