TMW Series - My Lighting Plastic Solutions
Transcript of TMW Series - My Lighting Plastic Solutions
TMW SeriesGasketed Enclosure Gear Tray Type
TMW Series with 4D15 Lens
TMW SeriesGasketed Enclosures for wet
and damp locations
Housing Reinforced polyester compound
Lenses
Clear crepe shallow or deep diffuser acrylic or polycarbonate
Gasketing En-Seal™ continuous
poured gasket
Gear Tray Replaces full metal enclosure, code
gauge reinforced metal pan provides ballast and lampholder support
LatchPress fit plastic cam-action latch
Mounting BracketStainless steel brackets
Conduit Fitting Flush white end plugs for
7/8” Housing end holes (2)
Lamp Configurations2–lamp
Lamp Types T8, T5 and T5HO
DescriptionThe TMW family is a quality gasketed enclosure, completely dust and moisture resistant and suitable for a wide range of applications. Constructed of a fiberglass upper body and an acrylic diffuser, securely positioned in a permanent, poured-in place sealing gasket. The diffuser locked by retaining latches ensuring a secure tight seal.
Features• One-piecehousingconstruction• Internalbrassstud• Integralmoldedlatchretentionpockets• Highimpactacrylic/DRmaterial diffuser composition; widest range of materials in the industry• Continuousformedperimeter on diffuser• Suitcase-stylestandardlatch• Whitepolyethylenemoldedendplugs• Externalbrassstudsandoptional stainless steel brackets• Continuouspouredgasket• Bodyremainsrigidduringhandling and installation
Approvals and/or Listings • ULandcULrecognized components • NSFInternational • IP65 • IP67
ApplicationsFood processing facilities, kitchens, parking garages, car washes, government facilities, schools, public areas and industrial facilities.
Ordering InformationPlease call 877-257-5841 for price and delivery.
NoticeA.L.P.Lightingcomponents,Inc,assumedno responsibility of these materials in any luminaries or applications.
Dimensions subject to change without notice.
The product is an OEM component kit requiring final assembly by a qualified OEM fixturemanufacturer.
Gasketed Enclosures AccessoriesFor Wet and Damp Locations
4’ TMW SeriesGasketed Enclosure Gear Tray Type
*Note:Siliconsealantshouldbeappliedtointernalthreadswhen installed for wet locations.
Kit Number DescriptionTMWS 240-GT 2-lamp TMW 4’ gasketed enclosure kit with two
7/8” holes and shallow acrylic diffuser
Part Number Component Description QtyTMWS 4-GT 6-latchhousingwith(2)7/8”endholes 1
TMW 4D15 4’Acrylic/Shallow/Crepe/MediumImpact 1
TMWGT4 TMW gear tray T8 2-lamp 1
GEARTRAY-HDW Gear tray hardware kit 1
LCW White celcon latch 6
LTP088 Liquid tight plug 2Optional Housings for Strip KitsTMWS 4L-8L 8-latch housing with (2) 1-1/8” D end holes 1
Optional Gear TraysPart Number Component Description QTYTMWGT4U T5, T8, or T12 4’
universal gear tray1
TMWGT41 TMW gear tray T8 1-lamp
1
Optional LensesPart Number Component Description QTYTMW4DDHI 4’Acrylic/DoubleDeep/Crepe/HighImpact 1
TMW 4DD15 4’ Acrylic/Double Deep/Crepe/Medium Impact
1
TMW4DHI 4’Acrylic/Shallow/Crepe/HighImpact 1
TMW 4DPC 4’ Polycarbonate/Shallow/Prismatic 1
TMW 4DDSCA 4’ Acrylic/Deep/Clear Smooth/ MediumImpact
1Optional Hanging ComponentsPart Number Component DescriptionBRKTT22PK TMW stainless steel mounting
brackets
4.7
49.9
8.1
TMWS 4-GTLTP088 (2)
LCW (6)
LANYARD (2)
TMWGT4
TMW 4D15
TRAYLAT (2)
Exploded View
Part Number Description
BRKTT22PK Mounting bracket for TMW (2)
LCW Celcon latch
LCWTP Tamper proof celcon latch with nut (screw not included)
LCWTP3 Tamper proof celcon latch with nut (screw included)
LPC Polycarbonate latch
LPCTP Tamper proof polycarbonate latch with nut (screw not included)
LPCTP3 Tamper proof polycarbonate latch with nut (screw included)
TAMPER SCREW 3 #6-32x5/8”TAMPRUFdrivescrewfor the LCWTP and LPCTP latches
TAMPERBIT3 Driverbitfor#6TAMPRUF drive screw
LSS-3 Stainless steel latch
LSS-3TP Tamper proof stainless steel latch with#8-32x5/8”screw
TPS-005 #8-32x3/8”snakeeyesdrivescrew for the LSS-3 latch
TAMPERBIT8 Driver bit for a snake eyes drive screw
LTF-01BULKKIT 7/8” liquid-tight power cord fitting
FEPW 7/8” dry location end plug
LTP088 7/8” liquid tight plug
DC-2 7/8” die-cast fitting assembly for 1/2” rigid conduit *see note below
DC-3 1-1/8” die-cast fitting assembly for 1/2” rigid conduit (nut not included) *see note below
DC-4 1-1/8” die-cast fitting assembly for 1/2” rigid conduit (nut included) *see note below
TRAYLAT Plastic gear tray mounting clip
TRAYLATSS Stainless steel gear tray mounting clip (required for all center lamp applications)
8’ TMW SeriesGasketed Enclosure Gear Tray Type
6333GrossPointRoad,Niles,IL60714USA773-774-9550Tel.•773-774-9331Fax•Direct877-257-5841Tel.•800-438-2500Fax•TollFreewww.alplighting.com
5.6
8.0
97.9
TMWS 8-GTLTP088 (2)
LCW (10)
TRAYLAT (4)
TMWGT8LANYARD (4)
TMW 8DD15
Exploded View
Kit Number DescriptionTMWS296-GT 2-lamp TMW 8’ gasketed enclosure kit with two
7/8” holes and shallow acrylic diffuser
Part Number Component Description QtyTMWS 8-GT 10-latch housing with (2) 7/8” end holes 1
TMW 8DD15 8’ Acrylic/Deep/Crepe/DR 1
TMWGT8 TMW gear tray T8 2-lamp 1
GEARTRAY-HDW Gear tray hardware kit 1
LCW White celcon latch 12
LTP088 Liquid tight plug 2Optional Housings for Strip KitsTMWS 8-GT-14L 14-latch housing with (2) 1-1/8” D end holes 1
Optional Gear TraysPart Number Component Description QTYTMWGT8U T5, T8 or T12 8’ universal gear tray 1
TMWGT81 TMW gear tray T8 1-lamp 1
TMWGT8HO TMW 2-lamp HO gear tray 1
TMWGT81HO TMW 1-lamp HO gear tray 1
Optional LensesPart Number Component Description QTYTMW8DDHI 8’Acrylic/Deep/Crepe/HighImpact 1
TMW 8DPC 8’ Polycarbonate/Deep/Prismatic
TMW 8DDSCA 8’ Acrylic/Deep/Clear Smooth/ MediumImpact
1
Optional Hanging ComponentsPart Number Component DescriptionBRKTT22PK TMW stainless steel
mounting brackets
TMWGT062111
TMW SeriesGasketed Enclosure Strip Type
TMW Series with 4D15 Lens
TMW SeriesGasketed Enclosures for wet
and damp locations
Housing Reinforced polyester compound
Lenses
Clear crepe shallow or deep diffuser acrylic or polycarbonate
Gasketing En-Seal™ continuous
poured gasket
Strip SEP Shallow Economy Strip
LatchPress fit plastic cam-action latch
Mounting BracketStainless steel brackets
Conduit Fitting Flush white end plugs for
7/8” Housing end holes (2)
Lamp Configurations2–lamp
Lamp Types T8, T5 and T5HO
DescriptionThe TMW family is a quality gasketed enclosure, completely dust and moisture resistant and suitable for a wide range of applications. Constructed of a fiberglass upper body and an acrylic diffuser, securely positioned in a permanent, poured-in place sealing gasket. The diffuser locked by retaining latches ensuring a secure tight seal.
Features• One-piecehousingconstruction• Internalbrassstud• Integralmoldedlatchretentionpockets• Highimpactacrylic/DRmaterial diffuser composition; widest range of materials in the industry• Continuousformedperimeter on diffuser• Suitcase-stylestandardlatch• Whitepolyethylenemoldedendplugs• Externalbrassstudsandoptional stainless steel brackets• Continuouspouredgasket• Bodyremainsrigidduringhandling and installation
Approvals and/or Listings • ULandcULrecognized components • NSFInternational • IP65 • IP67
ApplicationsFood processing facilities, kitchens, parking garages, car washes, government facilities, schools, public areas and industrial facilities.
Ordering InformationPlease call 877-257-5841 for price and delivery.
NoticeA.L.P.Lightingcomponents,Inc,assumedno responsibility of these materials in any luminaries or applications.
Dimensions subject to change without notice.
The product is an OEM component kit requiring final assembly by a qualified OEM fixturemanufacturer.
Gasketed Enclosures AccessoriesFor Wet and Damp Locations
4’ TMW SeriesGasketed Enclosure Strip Type
*Note:Siliconsealantshouldbeappliedtointernalthreadswhen installed for wet locations.
Kit Number DescriptionTMWS 240 2-lamp TMW 4’ gasketed enclosure kit with two
7/8” holes and shallow acrylic diffuser (Requires 4’ SEP240 strip kit)
Part Number Component Description QtyTMWS 4 6-latchhousingwith(2)7/8”endholes 1
TMW 4D15 4’Acrylic/Shallow/Crepe/MediumImpact 1
LCW White celcon latch 6
LTP088 Liquid tight plug 2Optional Housings for Strip KitsTMWS 4-8L 8-latch housing with (2) 7/8” end holes 1
TMWS4NH 6-latchhousingwithnoendholes 1
TMWS 4L-8L 8-latch housing with (2) 1-1/8” D end holes 1
SEP240-VP Kit ComponentsPart Number Component Description QTYSEP240B Channel 1
SEP240C Cover (T8) 1
SEP240SP Socket Plate (2-lamp T8) 2
SEPE End 2
RQTF 1/4 turn fastener for ballast cover
2
Optional Strip ComponentsSEP140SP Socket plate (1-lamp T8) 1
SEP340SP Socket plate (3-lamp T8) 1
SEPSP2L4FT5 Socket plate (2-lamp T5) 1
SEPSP1L4FT5 Socket plate (1-lamp T5) 1
SEPSP3L4FT5 Socket plate (3-lamp T5) 1
SEP240C-T5 Cover for T5 units only 1Optional LensesPart Number Component Description QTYTMW4DDHI 4’Acrylic/DoubleDeep/Crepe/HighImpact 1
TMW 4DD15 4’ Acrylic/Double Deep/Crepe/Medium Impact
1
TMW4DHI 4’Acrylic/Shallow/Crepe/HighImpact 1
TMW 4DPC 4’ Polycarbonate/Shallow/Prismatic 1
TMW 4DDSCA 4’ Acrylic/Deep/Clear Smooth/ MediumImpact
1
Optional Hanging ComponentsPart Number Component DescriptionBRKTT22PK TMW stainless steel mounting
brackets
4.7
49.9
8.1
SEP240B
SEP240SP (2)
SEP240C
TMW 4D15
LTP088 (2)
LCW (6)
SEPE (2)
TMW 4
Exploded View
Part Number Description
BRKTT22PK Mounting bracket for TMW (2)
LCW Celcon latch
LCWTP Tamper proof celcon latch with nut (screw not included)
LCWTP3 Tamper proof celcon latch with nut (screw included)
LPC Polycarbonate latch
LPCTP Tamper proof polycarbonate latch with nut (screw not included)
LPCTP3 Tamper proof polycarbonate latch with nut (screw included)
TAMPER SCREW 3 #6-32x5/8”TAMPRUFdrivescrewfor the LCWTP and LPCTP latches
TAMPERBIT3 Driverbitfor#6TAMPRUF drive screw
LSS-3 Stainless steel latch
LSS-3TP Tamper proof stainless steel latch with#8-32x5/8”screw
TPS-005 #8-32x3/8”snakeeyesdrivescrew for the LSS-3 latch
TAMPERBIT8 Driver bit for a snake eyes drive screw
LTF-01BULKKIT 7/8” liquid-tight power cord fitting
FEPW 7/8” dry location end plug
LTP088 7/8” liquid tight plug
DC-2 7/8” die-cast fitting assembly for 1/2” rigid conduit *see note below
DC-3 1-1/8” die-cast fitting assembly for 1/2” rigid conduit (nut not included) *see note below
DC-4 1-1/8” die-cast fitting assembly for 1/2” rigid conduit (nut included) *see note below
TRAYLAT Plastic gear tray mounting clip
TRAYLATSS Stainless steel gear tray mounting clip (required for all center lamp applications)
8’ TMW SeriesGasketed Enclosure Strip Type
6333GrossPointRoad,Niles,IL60714USA773-774-9550Tel.•773-774-9331Fax•Direct877-257-5841Tel.•800-438-2500Fax•TollFreewww.alplighting.com
5.6
8.0
97.9
SEP296
SEPE (2)
LCW (10)
LTP088 (2)
TMWS 8
SEP240SP (4)
SEP240 (2)TMW 8DD15
Exploded View
Kit Number DescriptionTMWS296 2-lamp TMW 8’ gasketed enclosure kit with two
7/8” holes and shallow acrylic diffuser (Requires8’SEP240TANstripkit)
Part Number Component Description QtyTMWS 8 10-latch housing with (2) 7/8” end holes 1
TMW 8DD15 8’ Acrylic/Deep/Crepe/DR 1
LCW White celcon latch 12
LTP088 Liquid tight plug 2Optional Housings for Strip KitsTMWS8NH 10-latch housing with no end holes 1
TMWS 8-14L 14-latch housing with (2) 1-1/8” D end holes (requiredforIP67)
1
SEP240TANVP Kit ComponentsPart Number Component Description QTYSEP296B Channel 1
SEP240C Cover (T8) 2
SEP240SP Socket Plate (2-lamp T8) 4
SEPE End 2
RQTF 1/4 turn fastener for ballast cover
4
Optional Strip ComponentsSEP140SP Socket plate (1-lamp T8) 2
SEP340SP Socket plate (3-lamp T8) 2
SEP296SP Socket plate (2-lamp SL/HO)
2
SEPSP2L4FT5 Socket plate (2-lamp T5) 2
SEPSP1L4FT5 Socket plate (1-lamp T5) 2
SEP240C-T5 Cover for T5 units only 1
Optional LensesPart Number Component Description QTYTMW8DDHI 8’Acrylic/Deep/Crepe/HighImpact 1
TMW 8DDPCA 8’ Polycarbonate/Deep/Prismatic 1
TMW 8DDSCA 8’ Acrylic/Deep/Clear Smooth/ MediumImpact
1
Optional Hanging ComponentsPart Number Component DescriptionBRKTT22PK TMW stainless steel mounting brackets
TMWSTRIP062111