ISO 14001-3rd Ed.-2015_Environmental Management Systems-Requirements With Guidance for Use
the essential threads in supporting global...
Transcript of the essential threads in supporting global...
the essential threads in supporting global structures
CONSTRUCTION WIND ENERGY TUNNELLING OIL & GAS OEM www.cooperandturner.cn
COOPER & TURNER ASIA
SALES OFFICE
Add:
Tel:
Fax:
E-mail:
Web:
Add: Room A713, No. 1 Zhenning East Road, Jiaochuan Street, Zhenhai, Ningbo, Zhejiang Province, China
+86 (0) 574 86535165
+86 (0) 574 86535166
www.cooperandturner.cn
MANUFACTURING FACILITY
Add:
Tel:
Fax:
E-mail:
Web:
Building No.8, 283 Xitang Road, Da Qiao New Zone,Haiyan, Zhejiang Province,China
+86 (0) 573 86972666
+86 (0) 573 86972011
www.cooperandturner.cn
CONSTRUCTION WIND ENERGY TUNNELLING OIL & GAS OEM
CTA Company Background
Founded in 2006, the Cooper and Turner Asia Group (CTA) are a recognised manufacturer and supplier of high strength fasteners in China. We have two wholly owned domestic enterprises, with an International Trading company in Ningbo, and a state of the art 18,000MSq manufacturing site in Haiyan, located 5km from the north side of the Hangzhou bay bridge.
As a member of the Cooper and Turner Ltd group of companies in operation since the 19th century we have been able to call upon over 150 years of fastener experience in setting up and developing our cutting edge domestic manufacturing capabilities. CTA is extremely proud of its continuous quality level, always striving for ZERO defects.
The group is currently accredited with ISO9001 quality management systems, 14001 environmental management systems, and 18001 OHSAS, as well as the TUV Nord certification.
www.cooperandturner.cn
Cooper & Turner Group have longstanding reputations for quality products and service within the marketplace, this means that our global companies can collectively offer a wide range of service that was not possible previously.
Strategic Manufacturing, Distribution and Sales operations in the UK (Sheffield, Glasgow & Rotherham), USA (Denver), China (Haiyan & Ningbo) and India (Delhi) allow Cooper & Turner Group to service customers on a national and Inter-national basis. This allows Cooper & Turner to provide local support to all major markets around the world.
Cooper & Turner Group not only has a longstanding expertise in the areas of Structural Engineering and Wind Energy but also services many blue chip customers in the Tunneling, Rail, Oil & Gas and OEM markets.
Direct Line Feed is available for customers who enjoy the convenience of a ‘full service’ option with products being delivered direct to the production line, allowing the manufacturer to focus on his core business of production.
Cooper & Turner Group has a global vision and a commitment to mutual support and growth with customers in all of its key market sectors.
THE CT GROUP OF COMPANIES
01 www.cooperandturner.cn
02 www.cooperandturner.cn 03 www.cooperandturner.cn
The company has extensive expertise in the manufacture of High Tensile Structural Bolts, ISO Bolts & Screws, Studs and Foundation Studs. To further complement our range we offer products such as bolt sockets, dowels, spacers sockets, non-return valves, grout sockets and grout plugs.AMERICA
SCOTLAND
INDIACHINA–HAIYAN
CHINA–NINGBO
ENGLAND
CONSTRUCTION
05 www.cooperandturner.cn
The combined forces of Cooper & Turner have been at the forefront of structural bolting manufacture for more than 150 years.
The combination of a comprehensive product range coupled with quality fastener manufacturing and full product traceability has meant that the Cooper & Turner name is both well-known and trusted in the construction marketplace. Indeed, this brand name is to be found on many of the most recent and exciting structural projects worldwide.
Today, Cooper & Turner Group continues to be a leading authority in this global market, advising and developing innovative, bespoke products to satisfy the exacting requirements of the construction industry.
THE CONSTRUCTION MARKET
FABRIC OF SOCIETY
04 www.cooperandturner.cn
All Grade 8.8 and higher-grade fasteners are totally batch-traceable. We use specialised stock control systems that maintain total lot-traceability by linking batch identity numbers to despatch documentation and customer orders.
Test certificates can be supplied with goods and are retained for a minimum of 10 years.
LOT TRACEAbLE
A number of additional services are available which are designed to make the selection and use of these structural fasteners easier:
INNOvATION
Technical Support
Training Seminars on Bolting
Site Visits
Bespoke packaging and labeling
Instruction in Bolt Tightening Techniques
A total supply package to the construction industry delivering direct to sites throughout the UK on a next-day service.
The group has a particular expertise in the picking, packing and labelling of comprehensive bolt lists, in construction phases, and delivering to time-slot schedules to rural and inner-city sites.
SERvICES
Product can be supplied in a wide variety of sizes, type materials, grades and finishes. In addition to the group’s manufactured products, they are also main agents for a number of key proprietary fixing and clamping systems.
PROdUCT RANGE
07 www.cooperandturner.cn
➢ Established brand
➢ Longstanding expertise within the wind turbine market
➢ Industry specific technical knowledge
➢ Flexibility though manufacturing the product range
➢ Superior testing facilities
➢ TUV Nord certification
➢ Proactive product development
➢ Cost competitive
➢ Business and production facilities ideally suited to the wind turbine marketplace
➢ Global sourcing and supply.
Market Credentials
06 www.cooperandturner.cn
Cooper and Turner currently service all aspects of the wind turbine market, providing a range of fasteners, both standard and customer bespoke for:
Utilising the Cooper & Turner distribution network allows wind turbine manufacturers to ‘single source’ all of their fastener requirements to provide further ‘added value’ benefits within the whole supply chain.
PRODUCT RANGES
Nacelles Blade to Hub Foundation Fixings Tower Construction
WIND ENERGY
THE WIND ENERGY MARKETCooper & Turner has serviced the wind turbine market for more than 15 years, throughout all the early design and development of what are now high technology products. The manufacture and provision of high quality, safety critical fasteners with the ability to operate in some of the most hostile environments in the world has gained the company an unrivalled reputation in the wind turbine marketplace.
With an in-depth understanding of this specialist market, in-house technical expertise and the manufacture of first-class products make Cooper and Turner an excellent choice for the supply of fasteners to this demanding market.
All of this is backed up by tangible quality and an extensive industry accredited product range.
GENERATING GLOBAL SOLUTIONS
Cooper & Turner has a long history of supplying tunnel bolts to the mining and tunnelling industry.
Today, the company is the UK’s leading manufacturer of specialist bolts to the modern tunnelling industry.
With full ‘in house’ fabrication facilities Cooper and Turner is capable of manufacturing a full range of fixings. The range includes all sizes from M12 to M100 as standard. The company is also able to manufacture special fasteners for bespoke requirements and to drawing.
Cooper and Turner was the first company to develop a range of ‘Fast Thread’ products for this market. These greatly facilitate assembly in what can be a dangerous working environment.
All fixings can be manufactured across a diverse range of grades including:
Mild Steel (4.6)
High Tensile (8.8)
High Tensile (10.9)
Stainless Steel – range of sizes
Range of Plastics
A full range of coatings is also available including galvanized, sherardized, bright zinc plating and other specialist finishes.
08 www.cooperandturner.cn
09 www.cooperandturner.cn
TUNNELLING
CONNECTING THE WORLD
THE TUNNELLING MARKET
The range of products Cooper & Turner has supplied to projects worldwide includes:
PRODUCT RANGES
Spear Bolts and Sockets
Threaded Lifting Sockets
Holding Down Studs
Segment Spacers and M&E Hole Formers ‘Spider’ Alignment Spacers
Curved Tunnel Bolts
‘Fast Thread’ Products
OIL & GAS RAIL
SUPPLYING THE INDUSTRY
THE OIL & GAS MARKET THE RAIL MARKET
Cold forge bolts from: Hot forge bolts from: M12 to M36 (½" - 1½” ) M12 to M100 (½" – 4”)
FORGING CAPACITY
Threaded studs: B7 / L7 / B7M / L7M / B16 / B8 / B8M Class 1 and Class 2 Stainless SteelGrades: 8.8, 10.9 & 12.9
Nuts: 2H / 2HM / Gr4 / GR7 / 7M
Finishes: Zinc plating; Zinc Nickel; Hot Dip Galvanizing; Sherardized; Delta; Mn /Zn Phosphating; Xylan.
PETROCHEM BOLTS
We supply stud bolts for pressure vessels, valves, flanges and fittings.
Studs : M12 to M120 (½" - 5”)
STUD BOLTS
10 www.cooperandturner.cn
Cooper and Turner Ltd manufacture, stock and distribute a highly engineered range of petro-chemical grade studbolt assemblies and fasteners developed specifically for critical applications in the petro chemical and processing Industries.
Cooper and Turner manufacture a complete range of track fasteners for the rail market. The quality and diversity of this product makes them suitable for the world’s railways.
Bolts and nuts are produced to BS, UIC and other rail standards. Diameters range from M12 (1/2") to M27 (1.1/8"), with lengths to suit many different applications.
Over 100 years of manufacturing expertise for the rail market has enabled the company to build up unrivalled knowledge and experience in the supplying of coach screws, track bolts, holding down studs and a comprehensive range of maintenance items that meet the exacting standards of rail contracts.
Our product range includes all grades of stud materials and heavy hexagonal nuts complying with ASTM specifications.
All material grades used in the petrochemical industry are catered for; materials generally available are released to both ASTM and ASME standards.
RAIL PRODUCT RANGE
Sleeper Screws / Screw Spikes Fishbolts Coachscrews Stretcher Bar Bolts
Muckle Bolts Brown Stud Through Bolts Stock Rail Bolts
C&T PINs Multigroove Locking Pins and Collars Plus customer specials to drawing
Fang Bolts Holding Down Studs and Assemblies'V' Grade Switch & Crossing Bolts
Cooper and Turner have supplied fasteners to some of the world’s best known rail networks including:
MARKET CREDENTIALS
Network Rail Irish railLondon Underground The Euro Tunnel
Finnish RailwaysHong Kong’s MTRC & KCRC Singapore’s MRT
Taiwan’s TRC & DORTS Malaysian railways REFER, Portugal
Egyptian National Railways
11 www.cooperandturner.cn
OEM
THE OEM MARKETCooper & Turner Group offers a full service to ‘Original Equipment Manufacturers’ (OEM's) of a wide range of fasteners from the more traditional ‘dock to dock’ supply to a complete Direct Line Feed (DLF) solution where parts are supplied to the point of use. Product sourcing, quality control, goods receipt, inspection, warehousing and delivery are all part of the services allowing manufacturers to focus on their core business of manufacture.
Cooper & Turner group currently work in a variety of markets where the combination of a flexibility of service and cost competitiveness has meant that the group has many longstanding relationships with blue chip manufacturers within these sectors. Robust systems, purchasing expertise and the manufacture of quality products means that the Cooper & Turner can put forward a compelling service offering to many manufacturers across a variety of market sectors.
ALLOWING FOCUS ON THE CORE BUSINESS OF MANUFACTURE
12 www.cooperandturner.cn
13 www.cooperandturner.cn
SERVICES
Providing value added service to supply chain
Removes the cost of stockholding and storage
Integrated web based communication system
Consignment stock options
Sourcing of cost effective product to the required quality standard
Robust computer based stock control systems
Bespoke customer solution with an emphasis on simplicity
Kitting
GLOBAL SUPPLY
Supply to OEM’s based in UK & Ireland, Europe, The Americas and the Far East
Expertise in supporting multi-site operations
Packaging can be specified to suit all needs.
Product can be shipped by air or sea with the associated customs documentation, handled by ‘in-house’ experts.
OEM AND ENGINEERING MARKETS
Automotive Construction EquipmentHeavy Engineering Maintenance
Cranes Materials HandlingOffshore Oil & GasPower generation
Pumps ValvesNuclearPetrochemical Industry Compressors
BS EN ISO 9001-2008
ISO 14001-2004
TUV Nord
CE Mark approval
Link Up – special accreditation for the rail industry
FPAL & Achilles JQS – Oil & Gas industry
COMMITMENT TO QUALITYProduct quality is of paramount importance to Cooper & Turner. Many of the fasteners that the company manufacture and supply are safety critical and most function in the most testing of environments.
Controls are rigid and because the majority of fasteners are manufactured ‘in-house’, the highest standards and specifications can be guaranteed. Products that are outside of our range and are procured from our approved vendors are rigorously audited throughout their manufacturing processes and systems. Further testing is carried out at the goods receipt stage at the ‘in-house’ testing facility for compliance with order instructions. All suppliers are regularly monitored to ensure that the same high standards are maintained.
GROUP QUALITY ACCREDITATIONS
PRODUCT RANGE
The company carries more than 20,000 different product lines at any given time within its global distribution facilities.
This means that, in most instances, product can be supplied ‘off the shelf’ and to the tightest of deadlines. Extensive group sourcing enables the company to offer an unrivalled fastener solution from the most reliable sources from approved Cooper & Turner sources throughout the world.
In addition to the supply of standard ‘c’ class components, designers can consult with our in house technical expertise at our Sheffield (UK) or Haiyan (China) facilities for a bespoke, more technically demanding applications.