Product NewsTHE DRAG SPECIALTIES JULY 2021

1 +49 (0) 6501 96 95 -2000 • partseurope.eu

2-INTO-1 SYSTEM WITH THREE-STEP HEADER• Designed to increase horsepower and

torque while providing an aggressive, low-frequency sound level

• 1,75” to 1,875” to 2” high-flow 16-gauge stepped primary headers with a 2,5” collector

• 4,5” diameter, 16-gauge HP-Plus muffler with 2,5” inlet

• Removable 1,5” absorptive baffle with 3” reverse cone outlet to maximize torque; baffle is wrapped in stainless steel wool and high-temp fiberglass for a rich mellow tone

• 2,50”, 220°, 16-gauge heat shields• 18 mm and 12 mm O2 bungs

welded into the primaries• Black finish• Matching black ghost pipe available

separately to give a 2-into-2 look• Optional billet tip for system sold

separately; please see page 381 of the Parts Europe 2021 FatBook for additional optional billet aluminum tips

PART # DESCRIPTIONFOR 17-21 FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU/ FLTRK1800-2515 2-into-1 system1861-1574 Optional ghost pipe

SISSY BAR SIDE PLATES• Steel side plates with a chrome-plated finish• Docking hardware is not included; uses standard H-D detachable docking hardware• Accept any round or square 11” W Khrome Werks sissy bar; see

pages 358-359 of the Parts Europe 2021 FatBook

PART # DESCRIPTION1504-0104 For 09-21 FLHT/ FLHR/ FLHX/ FLTR w/ detachable docking hardware

1800-2515 shown withendcap 1861-1454

1861-1574

2 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

JULY 2021

SADDLEMENWant great style and long-haul comfort? Switch up to a Saddlemen seat for your ride. They offer a huge variety of shapes, styles and stitch patterns on their seats to give you the rider best fit and long-haul comfort. Plus the seats add beautiful style and a factory fit.

EXTENDED REACH UNKNOWN INDUSTRIES PERFORMANCE GRIPPER SEAT• Extends the driver’s seating area by a full 51 mm (2”)• Combines a GelCore™ interior and Ultra-Foam to create a foam

that is a perfect balance of rigidity and user compliance• Crafted with Saddlemen’s carbon-fiber at the front, black

gripper on the lumbar support and SaddleHyde™ sides

PART # DESCRIPTION0801-1361 For 08-21 FLHR/ FLHT/ FLHX/ FLTR/ FLTRU/ FLTRK/ FLTRX and 09-13 Trikes

UNKNOWN INDUSTRIES PERFORMANCE GRIPPER SEATS• Combines a GelCore™ interior and Ultra-Foam to create a foam that

is a perfect balance of rigidity and user compliance• Crafted with Saddlemen’s carbon-fiber at the front, black gripper

on the lumbar support and SaddleHyde™ sides

PART # DESCRIPTION0801-1360 For 08-21 FLHR/ FLHT/ FLHX/ FLTR/ FLTRX/ FLTRU/ FLTRK0801-1358 For 97-07 FLHR (except FLHRS), 06-07 FLHX0801-1359 For 97-07 FLHT/ FLTR

0801-1360

3 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

JULY 2021

HOG KILLERS SEAT• Slim design follows the contour of the motorcycle’s frame• Vintage-inspired pleated seat with piping accents and SaddleHyde™ construction• Combines a GelCore™ interior and Ultra-Foam that creates a foam

that is a perfect balance of rigidity and user compliance• Ultra-Foam’s unique molding process creates an element-resistant self-skinning

process that seals the foam from water and enhances the seat’s durability and comfort

PART # DESCRIPTION0801-1331 For 08-21 FLHR/ FLHT/ FLHX/ FLTR/ FLTRU/ FLTRK/ FLTRX

STEP-UP GRIPPER SEAT• Ultra-modern styling with the extreme gripper

lumbar – keeps the rider securely locked in the seat• Smooth SaddleHyde™ styling cues• Combines a GelCore™ interior and Ultra-Foam to create a foam

that is a perfect balance of rigidity and user compliance• Ultra-Foam’s unique molding process creates an element-resistant self-skinning process

that seals the foam from water and enhances the seat’s durability as well as comfort• Co-molded GelCore is the largest comfort advancement in

motorcycle seating since the creation of the suspension• If you are looking for the ultimate performance seat upgrade, look no further

PART # DESCRIPTION0801-1350 For 97-07 FLHT/ FLTR

STEP-UP SEATS• Saddlemen has collaborated with top freestyle

performers to create the new T-sport inspired step-up lattice stitch (LS) or tuck-n’-roll (TR) seats

• LS seats infuse old-school lattice stitch retro styling with a modern twist

• Seat with TR portion features true tuck-n’-roll styling• High lumbar keeps the rider locked into the seat• Features Saddlemen’s Ultra-Foam which is formulated

to provide a perfect balance of rigidity and user compliance with integrated GelCore™ technology

• Black whisper-grain SaddleHyde™ cover• Installs easily with all necessary mounting

hardware and instructions included

PART # DESCRIPTIONFOR 97-07 FLHT/ FLTR0801-1346 Front TR, rear LS0801-1348 Full LS0801-1353 Front LS

0801-1346

0801-1348

0801-1353

4 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

JULY 2021

LARIAT SOLO SEATS• Genuine distressed brown leather construction is as close to

having a true western horse saddle as you can get• Genuine cowhide is tanned and cut to produce unique

leather covers; no two seats are the same• The seat will break in to be supple with a distinctive appearance,

further enhancing the unique appeal of the free-range leather• Specially designed to position the rider lower and

forward for better control and riding comfort• Solo saddle is low, wide and contoured to allow the

rider to securely plant feet when stopped• Progressive-density foam and GelCore™ technology ease

tailbone pressure for better circulation and comfort

PART # DESCRIPTION0801-1334 For 97-07 FLHR, 06-07 FLHX0801-1340 For 97-07 FLHT/ FLTR

LOW SOLO SEATS• Specially designed to position the rider lower and farther

forward for better control and riding comfort• Saddle is low, wide and contoured to allow the rider

to securely plant their feet when stopped• Progressive-density foam and GelCore™ technology ease

tailbone pressure for better circulation and comfort• Matching, optional leather-covered pillion pads also feature

gel to aid in passenger comfort (sold separately)

PART # DESCRIPTIONFOR 97-07 FHLR (EXCEPT FLHRS), 06-07 FLHX0801-1335 Smooth solo seat0801-1337 Studded solo seat

PART # DESCRIPTIONFOR 97-07 FLHT/ FLTR0801-1341 Smooth solo seat0801-1342 Studded solo seat

KNUCKLE SOLO SEATS• Audacious new custom seat from

Saddlemen, with a brash refinement that instantly transforms your bike

• Deep, aggressive ribs are carefully stitched into the SaddleHyde™ weather-resistant cover while hand-crafted progressive-density foam and GelCore™ foundation serve up comfort not normally present in a low-profile seat

• Strong plastic-injected pans with plated hardware ensure a perfect fit for a trouble-free install

PART # DESCRIPTION0801-1336 For 97-07 FLHR (except FLHRS), 06-07 FLHX0801-1343 For 97-07 FLHT/ FLTR

0801-1334

0801-1335

0801-1342

0801-1343

5 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

JULY 2021

EXTENDED REACH RENEGADE SOLO SEAT• Low, wide and comfortable, with carefully designed contours

and a fantastic looking frame-hugging profile• Extends the driver’s seating area by a full 51 mm (2”)• Matching pillion pads are available and are easy to install and remove• Features Saddlemen’s famous combination of progressive-density

foam and GelCore™ in the driver’s position, easing tailbone pressure and improving circulation for a smooth, comfortable ride

PART # DESCRIPTION0801-1324 For 08-21 FLHR/ FLHT/ FLHX/ FLTR/ FLTRU/ FLTRK/ FLTRX and 09-13 Trikes

RENEGADE LS SOLO SEATS• Purpose-built on Saddlemen’s slammed solo seat

chassis with show-bike looks and quality• Seat shape and contours have been carefully developed to

create a clean look that is uncluttered by excessive seams• Popular lattice stitch (LS) retro styling• Saddlemen’s ProFoam is formulated to provide a perfect balance of comfort

and rigidity and user compliance with integrated GelCore™ technology• Easy to install – just like the bike’s original seat

PART # DESCRIPTIONFOR 97-07 FLHR, 06-07 FLHX0801-1332 Black0801-1333 BrownFOR 97-07 FLHT/ FLTR0801-1338 Black0801-1339 Brown

SISSY BARS WITH PAD• Durable all steel construction

(mounts and uprights) with premium chrome plating

• Easy to install with included hardware• Includes cushioned backrest

pad made from weather- and UV-resistant PU material

• Backrest pad can be easily removed for a clean sissy bar look

PART # DESCRIPTION BAR HEIGHT1501-0717 For 14-21 FLHR/ FLT/ FLHT/ FLTR/ FLHX (except FLTRU/ FLTRUSE/ FLTRK) models 47 cm (181/2”)

0801-1324

0801-1332

0801-1339

PART # DESCRIPTION BAR HEIGHT1501-0718 For 14-21 Indian models (except Roadmaster, Scout and FTR) 53,5 (21”)

6 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

JULY 2021

PREDATOR III SEATS • Features a 18 cm (7”) tall driver support with unique styling• High-quality automotive-grade vinyl cover• Molded polyurethane foam for maximum comfort and styling• Seat is made narrow up front for better leg clearance• 5 mm (3/16”) ABS thermoformed seat base for a perfect fit, with

a carpeted bottom and rubber bumpers to protect paint • Fits with all Drag and most H-D sissy bars• Includes all mounting hardware

PART # DESCRIPTIONFOR 06-10 FXST, 07-17 FLSTF, 08-11 FLSTSB; 76 CM L OVERALL (35,5 CM L X 29 CM W FRONT) (26,5 CM L X 16,5 CM W REAR) (30” L OVERALL (14” L X 111/2” W FRONT) (101/2” L X 61/2” W REAR))0802-1437 Smooth0802-1438 Double diamond, black thread0802-1439 Double diamond, silver thread0802-1440 Double diamond, red thread

0802-1437

0802-1438

0802-1439

0802-1440

7 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

JULY 2021

DRIVER BACKREST KITS FOR OEM DRESSER/ TOURING SEATS• Specially designed to work with 99-21

Dresser/ Touring models (except H-D FL Trike) with OEM slotted one-piece seat

• EZ Glide™ receiver mechanism allows you to easily mount your choice of pad assembly (receiver mechanism and pads sold separately)

• Pad assembly includes high-quality polished and chrome-plated 184 mm (short) or 248 mm (tall) (7,25” or 9,75”) detent bar with a design that provides 51 mm (2”) of fore and aft adjustment

• All pads fold forward for ease of getting on and off bike

• Pad assembly options include a vinyl pillow-style to match tall pillow-style seats, and solar-reflective leather styles that match both lower profile and tall seats

• Pad assemblies also include a pouch• Includes all mounting hardwareNOTE: Short bar is for Street Glide, Road

King and Road Glide-style low-profile OEM seats. Tall bar is for H-D Ultra-style tall-profile seats.

PART # DESCRIPTIONLARGE PAD ASSEMBLIES WITH PIVOTING PAD (25,5 CM X 19 CM) (10” X 7,5”)0822-0461 Short bar, solar-reflective leather0822-0462 Tall bar, pillow-style vinyl0822-0463 Tall bar, solar-reflective leather

0822-0461

0822-0462

0822-0463

THE CONVERTIBLE EZ GLIDE II™ BACKREST WITH BUILT-IN RAIN COVER • Fits into Drag Specialties seats’ internal EZ Glide system that features no metal-

to-metal contact with the backrest detent bars; bars are securely suspended in place using synthetic composites that virtually eliminate corrosion and wear

• Features a detent bar with multiple detents on lower portion for adjustability up and down within the seat

• Chrome-plated hardware that allows up to 51 mm (2”) of forward-rearward adjustment

• Backrest includes a built-in rain cover that pulls out of the pouch on the backside of the pad and covers the entire seat

• Rain cover is secured in the pouch by two snaps and can be removed for cleaning or to use the oversized pouch for additional storage

• Rain-resistant black cover is 300 x 300 denier polyester fabric with a urethane coating and WRMR (water-resistant, mildew-resistant) finish

• All exposed hardware is polished with a chrome finish; internal base is 14 gauge steel

• Pad pivots to the angle of your back and adjusts fore and aft up to 51 mm (2”)

PART # DESCRIPTION

0822-0460Large, smooth backrest (w/ pouch and rain cover) (25,5 cm W x 19 cm H) (10” x 71/2”)

8 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

JULY 2021

38 MM (11/2”) “BIG” BUFFALO BARS• Handlebars for the “biggest fattest” look• Feature a full 38 mm (11/2”) diameter in the clamping area (except T-Bars)• Custom bends for the ultimate in comfort• Gloss black, chrome-plated or flat black finish available• Slotted and notched for Throttle-By-Wire applications• Designed for use with 96 and newer style controls and master cylinders• Special risers required for all bars (except T-Bars) include upper clamps

and feature hidden clamp bolts; see Part Europe 2021 FatBook• Optional gauge mounts are available separately for T-Bars; see

DASHES & GAUGES section of the Parts Europe 2021 FatBookNOTE: Accept heated grips and hydraulic clutch.

CHROME GLOSS BLACK FLAT BLACK DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK0601-4306 0601-4307 0601-4308 15 cm (6”) T-Bar 12,5 cm (5”) 79 cm (31”) 21,5 cm (8,5”) 15 cm (6”)0601-4309 0601-4310 0601-4311 20,5 cm (8”) T-Bar 20,5 cm (8”) 79 cm (31”) 21,5 cm (8,5”) 16,5 cm (6,5”)0601-4312 0601-4313 0601-4314 25,5 cm (10”) T-Bar 25,5 cm (10”) 79 cm (31”) 21,5 cm (8,5”) 20,5 cm (8”)0601-4324 0601-3971 - 25,5 cm (10”) Zero T-Bar 25,5 cm (10”) 79 cm (31”) 21,5 cm (8,5”) 0 cm (0”)0601-4325 0601-3972 - 30,5 cm (12”) Zero T-Bar 30,5 cm (12”) 63,5 cm (25”) 21,5 cm (8,5”) 0 cm (0”)0601-4326 0601-3973 - 35,5 cm (14”) Zero T-Bar 35,5 cm (14”) 63,5 cm (25”) 21,5 cm (8,5”) 0 cm (0”)0601-4286 0601-4287 - 20,5 cm (8”) Radius T-Bar 20,5 cm (8”) 79 cm (31”) 21,5 cm (8,5”) 18 cm (7”)0601-4315 0601-4316 0601-4317 25,5 cm (10”) Chopper T-Bar 25,5 cm (10”) 80 cm (31,5”) 25,5 cm (10”) 11,5 cm (4,5”)0601-4318 0601-4319 0601-4320 30,5 cm (12”) Chopper T-Bar 30,5 cm (12”) 80 cm (31,5”) 25,5 cm (10”) 11,5 cm (4,5”)0601-4321 0601-4322 0601-4323 35,5 cm (14”) Chopper T-Bar 35,5 cm (14”) 80 cm (31,5”) 25,5 cm (10”) 11,5 cm (4,5”)0601-4301 0601-4302 - 33 cm (13”) Ape Hanger 33 cm (13”) 104 cm (41”) 25,5 cm (10”) 25 cm (9,75”)0601-1251 0601-1252 - 40,5 cm (16”) Ape Hanger 40,5 cm (16”) 104 cm (41”) 25,5 cm (10”) 25,5 cm (10”)0601-4303 0601-4304 0601-4305 45,5 cm (18”) Ape Hanger 45,5 cm (18”) 104 cm (41”) 25,5 cm (10”) 25 cm (9,75”)0601-4293 0601-4294 - Beach Bar 7,6 cm (3”) 99 cm (39”) 21,5 cm (8,5”) 37,5 cm (14,75”)0601-4296 0601-4297 - Bikini Bar 7,6 cm (3”) 91 cm (36”) 21,5 cm (8,5”) 37,5 cm (14,75”)0601-4299 0601-4300 - Drag Bar - 79 cm (31”) 21,5 cm (8,5”) 15 cm (6”)

0601-1252

0601-3971

0601-4287

0601-4293

T-Bar

Conventional

0601-42970601-4299

0601-4309

0601-4318

0601-1251

9 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

JULY 2021

32 MM (11/4”) BUFFALO TOURING HANDLEBARS• Chrome, gloss-black or flat black finish handlebars• Diamond-knurled and slotted for 25,4 mm (1”) internal wiring• Accept stock controls and handlebar clamp• Accept OEM H-D heated grips• Designed specifically for electronic throttle control applications

CHROME GLOSS BLACK FLAT BLACK DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACKFOR 08-20 FLHR, 08-13 FLTR (EXCEPT FLHRXS)0601-27391 0601-12401 - 25,5 cm (10”) Ape Hanger 25,5 cm (10”) 99 cm (39”) 29 cm (11,5”) 25,5 cm (10”)0601-27341 0601-27401 0601-3506 32 cm (12,5”) Ape Hanger 32 cm (12,5”) 91 cm (36”) 26,5 cm (10,5”) 30,5 cm (12”)0601-27361 0601-12421 0601-3499 35,5 cm (14”) Ape Hanger 35,5 cm (14”) 99 cm (39”) 25,5 cm (10”) 28 cm (11”)0601-27351 0601-27411 0601-3507 40,5 cm (16”) Ape Hanger 40,5 cm (16”) 100 cm (39,5”) 29 cm (11,5”) 25,5 cm (10”)0601-2737 0601-1244 0601-4266 45,5 cm (18”) Ape Hanger 45,5 cm (18”) 102 cm (40”) 30,5 cm (12”) 20,5 cm (8”)0601-2742 0601-1247 0601-4268 51 cm (20”) Ape Hanger 51 cm (20”) 94 cm (37”) 30,5 cm (12”) 20,5 cm (8”)0601-27431 0601-4253 0601-4254 Beach bar 76 mm (3” ) 90 cm (35,5”) 24 cm (9,5”) 38 cm (15”)FOR 08-20 FLHT/ FLHX AND H-D FL TRIKE0601-27441 0601-27451 0601-3508 33 cm (13”) Ape Hanger 33 cm (13”) 97 cm (38”) 32 cm (12,5”) 19 cm (7,5”)0601-27461 0601-27471 0601-4265 43 cm (17”) Ape Hanger 43 cm (17”) 97 cm (38”) 32 cm (12,5”) 19 cm (7,5”)1 TÜV approved.

0601-2737

0601-27390601-2741

See chart for details

Batwing

Conventional

0601-2743

10 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

JULY 2021

32 MM (11/4”) BUFFALO BARS• The ultimate 32 mm (11/4”) diameter handlebar, designed for maximum comfort• 25,4 mm (1”) diameter in clamping area (except T-Bars)• Slotted and notched for Throttle-By-Wire applications unless noted• Available with a show chrome, gloss black or flat black finish• Standard bars have 89 mm (31/2”) on-center knurling to prevent movement (except T-Bars)• Springer-style bars have 12 cm (43/4”) center diamond knurling for a smooth

finished look; work with the OEM Springer risers and handlebar clamps• Optional 32 mm (11/4”) thick Buffalo risers are also available to complete the look• Optional handlebar clamps cover all of the center area that is sized down to 25,4 mm (1”)• Optional gauge mounts for T-Bars sold separately; see DASHES

& GAUGES section of the Parts Europe 2021 FatBook• See Parts Europe 2021 FatBook for handlebar clamps and risersNOTE: Not for models with electronic throttle control unless noted.NOTE: Not for use with stock risers and handlebar/ gauge mount on 883C/ 1200C models.NOTE: Compatible with hydraulic clutch controls.CHROME GLOSS BLACK FLAT BLACK DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK0601-4291 0601-3974 - 25,5 cm (10”) Zero T-Bar 25,5 cm (10”) 63,5 cm (25”) 23 cm (9”) 0 cm (0”)0601-4292 0601-3975 - 30,5 cm (14”) Zero T-Bar 30,5 cm (14”) 63,5 cm (25”) 23 cm (9”) 0 cm (0”)

0601-4269 0601-4270 - 10 cm (4”) T-Bar (curved risers) 10 cm (4”) 76 cm (30”) 23 cm (9”) 15 cm (6”)

0601-42711 0601-42721 0601-42731 15 cm (6”) T-Bar (curved risers) 21,5 cm (8,5”) 76 cm (30”) 23 cm (9”) 19,5 cm (7,75”)

0601-42741 0601-42751 0601-42761 20,5 cm (8”) T-Bar (curved risers) 25 cm (9,75”) 76 cm (30”) 23 cm (9”) 21 cm (8,25”)

0601-42771 0601-42781 0601-42791 25,5 cm (10”) T-Bar (curved risers) 30,5 cm (12”) 76 cm (30”) 23 cm (9”) 21,5 cm (8,5”)

0601-10143, 4 0601-22633, 4 0601-35043 20,5 cm (8”) T-Bar (straight risers) 32 cm (12,5”) 79 cm (31”) 21,5 cm (8,5”) 15 cm (5,875”)

DS-300335

DS300345

0601-1006

0601-2738

0601-35040601-3975

0601-4235

0601-4245

0601-4237

0601-4242

0601-4239

1 Not for use with hydraulic clutch. 2Accept H-D OEM heated grips. 3 Notched for Throttle-By-Wire. 4 TÜV approved.

See chart for details

11 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

JULY 2021

32 MM (11/4”) TOURING HANDLEBARS• Designed specifically as a direct bolt-on

upgrade for 15-20 Road Glide models• Bars include black control clamps to

replace the “oversize” OEM clamps• Do not need to remove the stock pin in the OEM mount

clamps; bars still have more than 35° of adjustment• Available in dimpled applications• Work with stock controls• Slotted for internal wiring• Accept H-D OEM heated grips

CHROME GLOSS BLACK FLAT BLACK END RISE WIDTH CENTER WIDTH PULLBACKFOR 15-20 FLTRX/ FLTRU/ FLTRK0601-3854 0601-3855 0601-4261 25,5 cm (10”) 89 cm (35”) 17,75 cm (7”) 17,75 cm (7”)0601-3856 0601-3857 0601-4262 30,5 cm (12”) 89 cm (35”) 17,75 cm (7”) 17,75 cm (7”)0601-3858 0601-3859 0601-4263 35,5 cm (14”) 89 cm (35”) 17,75 cm (7”) 17,75 cm (7”)0601-3860 0601-3861 - 40, 5 cm (16”) 89 cm (35”) 17,75 cm (7”) 17,75 cm (7”)0601-3862 0601-3863 - 45,75 cm (18”) 89 cm (35”) 17,75 cm (7”) 17,75 cm (7”)

0601-3861

0601-3862

32 MM (11/4”) BUFFALO BARS (CONT)CHROME GLOSS BLACK FLAT BLACK DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK

0601-10153, 4 0601-22643, 4 0601-35053 25,5 cm (10”) T-Bar (straight risers) 37 cm (14,5”) 79 cm (31”) 21,5 cm (8,5”) 15 cm (5,875”)

0601-27482, 3, 4 0601-27492, 3, 4 0601-35092, 3 30,5 cm (12”) T-Bar (straight risers) 30,5 cm (12”) 73,5 cm (29”) 23 cm (9”) 12,5 cm (5’’)

0601-27502, 3, 4 0601-27512, 3, 4 0601-35102, 3 35,5 cm (14”) T-Bar (straight risers) 35,5 cm (14”) 73,5 cm (29”) 23 cm (9”) 12,5 cm (5’’)

0601-27522, 3, 4 0601-27532, 3, 4 - 40,5 cm (16”) T-Bar (straight risers) 40,5 cm (16”) 73,5 cm (29”) 23 cm (9”) 12,5 cm (5’’)

0601-4280 0601-4281 - 15 cm (6”) Radius T-Bar 15 cm (6”) 79 cm (31”) 23 cm (9”) 15 cm (6”)0601-4283 0601-4284 - 20,5 cm (8”) Radius T-Bar 20,5 cm (8”) 79 cm (31”) 23 cm (9”) 18 cm (7”)DS-3003351, 4 - - Drag Bar for Springer - 79 cm (31”) 21,5 cm (8,5”) 15 cm (6”)0601-42331 0601-42341 0601-42351 Drag Bar - 79 cm (31”) 21,5 cm (8,5”) 15 cm (6”)0601-42421 0601-42431 0601-42441 Classic Style 5,1 cm (2”) 93 cm (36,5”) 26,5 cm (10,5”) 21,5 cm (8,5”)DS-3003361, 4 - - Classic Style 5,1 cm (2”) 93 cm (36,5”) 26,5 cm (10,5”) 21,5 cm (8,5”)0601-27382, 4 - - Bagger Style Ape Hanger 25,5 cm (10”) 89 cm (35,125”) 25,5 cm (10”) 20,5 cm (8”)0601-42451 0601-42461 - Bagger Style 11,5 cm (4,5”) 88 cm (34,5”) 26,5 cm (10,5”) 32 cm (12,5”)DS-3003371, 4 - - Bagger Style 11,5 cm (4,5”) 88 cm (34,5”) 26,5 cm (10,5”) 32 cm (12,5”)

0601-42471 0601-42481 - Bagger Style for Road King/ Road Glide 14 cm (5,5”) 83 cm (32,5”) 26,5 cm (10,5”) 40,5 cm (16”)

0601-4239 0601-4240 - Bagger II Style for Road King/ Road Glide 10,5 cm (4,125”) 86 cm (34”) 26,5 cm (10,5”) 33 cm (13”)

- 0601-42552 - Bagger Style Ape Hanger 25,5 cm (10”) 89 cm (35,125”) 25,5 cm (10”) 20,5 cm (8”)0601-42571 0601-42581 - 21,5 cm (8,5”) Ape Hanger 21,5 cm (8,5”) 95 cm (37,5”) 29 cm (11,5”) 25,5 cm (10”)

DS-3003411, 4 - - 24 cm (9,5”) Ape Hanger for Springer 24 cm (9,5”) 91 cm (36”) 30,5 cm (12”) 25,5 cm (10”)

DS3003451, 4 - - 32 cm (12,5”) Ape Hanger for Springer 32 cm (12,5”) 98 cm (38,5”) 30,5 cm (12”) 30,5 cm (12”)

0601-10084 - - 40,5 cm (16”) Ape Hanger for Springer 40,5 cm (16”) 103 cm (40,5”) 28 cm (11”) 26,5 cm (10,5”)

0601-1009 - - 48,5 cm (19,5”) Ape Hanger for Springer 40,5 cm (19,5”) 103 cm (40,5”) 28 cm (11”) 26,5 cm (10,5”)

0601-10064 - - Beach bars for Springer 76 mm (3”) 100 cm (39,5”) 26,5 cm (10,5”) 43 cm (16,875”)0601-4250 0601-4251 0601-4252 Road King Style 14,5 cm (5,75”) 88 cm (34,5”) 24 cm (9,5”) 28 cm (11”)0601-03044 - - Road King Style 14,5 cm (5,75”) 88 cm (34,5”) 24 cm (9,5”) 28 cm (11”)0601-4236 0601-4237 0601-4238 Stick Style - 76 cm (30”) - -0601-4288 0601-4289 - Inverted Riser Drag Bar 25,5 cm (10”) 79 cm (31”) 21,5 cm (8,5”) 33 cm (13”)1 Not for use with hydraulic clutch.2 Accept H-D OEM heated grips.3 Notched for Throttle-By-Wire.4 TÜV approved.

12 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

JULY 2021

25,4 MM (1”) HANDLEBARS• Steel tubing with a chrome-plated, gloss black or flat black finish• Wide variety of bends so you get that just-right fit and feel• Slotted and notched for Throttle-By-Wire applications (unless noted)NOTE: Accept H-D OEM heated grips.

CHROME GLOSS BLACK FLAT BLACK DESCRIPTION END RISE WIDTHCENTER WIDTH PULLBACK

0601-4176 0601-4177 0601-4178 Bagger 14,5 cm (5,75”) 84 cm (33”) 24 cm (9,5”) 31,5 cm (12,375”)0601-05651, 2 - - Bagger 14,5 cm (5,75”) 84 cm (33”) 24 cm (9,5”) 31,5 cm (12,375”)0601-4179 0601-4180 - Bagger/ Road King 16 cm (6,25”) 75,5 cm (29,75”) 24 cm (9,5”) 37,5 cm (14,75”)- - 0601-4206 25,5 cm (10”) Ape Hanger 25,5 cm (10”) 77,5 cm (30,5”) 21,5 cm (8,5”) 28 cm (11”)0601-4207 0601-4208 0601-4209 32 cm (12,5”) Ape Hanger 30,5 cm (12”) 79 cm (31”) 21,5 cm (8,5”) 20,5 cm (8”)- - 0601-4211 35,5 cm (14”) Ape Hanger 38 cm (15”) 81 cm (32”) 25,5 cm (10”) 20,5 cm (8”)- - 0601-4212 40,5 cm (16”) Ape Hanger 40,5 cm (16”) 81 cm (32”) 20,5 cm (8”) 15 cm (6”)0601-0028 - - 45,5 cm (18”) Ape Hanger 45,5 cm (18”) 81 cm (32”) 20,5 cm (8”) 15 cm (6”)

0601-4191 0601-4192 0601-4193 25,5 cm (10”) Ape Hanger for Narrow Glide 25,5 cm (10”) 71 cm (28”) 14 cm (5,5”) 20,5 cm (8”)

- 0601-12311 - 25,5 cm (10”) Ape Hanger for Narrow Glide 25,5 cm (10”) 71 cm (28”) 14 cm (5,5”) 20,5 cm (8”)

0601-4194 0601-4195 0601-4196 30,5 cm (12”) Ape Hanger for Narrow Glide 30,5 cm (12”) 76 cm (30”) 14 cm (5,5”) 20,5 cm (8”)

0601-12321 0601-12331 - 30,5 cm (12”) Ape Hanger for Narrow Glide 30,5 cm (12”) 76 cm (30”) 14 cm (5,5”) 20,5 cm (8”)

0601-4197 0601-4198 0601-4199 35,5 cm (14”) Ape Hanger for Narrow Glide 35,5 cm (14”) 76 cm (30”) 14 cm (5,5”) 20,5 cm (8”)

0601-12341 0601-12351, 3 - 35,5 cm (14”) Ape Hanger for Narrow Glide 35,5 cm (14”) 76 cm (30”) 14 cm (5,5”) 20,5 cm (8”)

0601-4200 0601-4201 0601-4202 40,5 cm (16”) Ape Hanger for Narrow Glide 40,5 cm (16”) 76 cm (30”) 14 cm (5,5”) 15 cm (6”)

- 0601-12361 - 40,5 cm (16”) Ape Hanger for Narrow Glide 40,5 cm (16”) 76 cm (30”) 14 cm (5,5”) 15 cm (6”)

0601-4203 0601-4204 0601-4205 45,5 cm (18”) Ape Hanger for Narrow Glide 45,5 cm (18”) 76 cm (30”) 14 cm (5,5”) 15 cm (6”)

0601-12301 - - 25,5 cm (10”) Narrow Ape Hanger 25,5 cm (10”) 76 cm (30”) 14 cm (5,5”) 20,5 cm (8”)

0601-4163 0601-4164 0601-4165 Dragster wide - 77,5 cm (30,5”) 21,5 cm (8,5”) 17 cm (6,75”)0601-05701 - - Dragster wide 77,5 cm (30,5”) 21,5 cm (8,5”) 17 cm (6,75”)

0601-4166 0601-4167 0601-4168 Dragster X-wide - 79 cm (31”) 26,5 cm (10,5”) 16 cm (6,25”)

0601-4182 0601-4183 0601-4184 Buckhorn medium 23 cm (9”) 86 cm (34”) 22 cm 8,75”) 25,5 cm (10,125”)0601-4185 0601-4186 0601-4187 Buckhorn low 17 cm (6,75”) 79 cm (31,25”) 22 cm (8,675”) 23 cm (9”)

0601-4160

0601-4165

0601-41660601-4170

0601-4172

0601-4175

0601-4176

0601-4180

0601-4183

0601-4187

0601-4212

0601-4218

Conventional T-bar

1 TÜV approved. 2 Not for ETC models. 3 Not for Throttle-By-Wire applications.

See chart for details

13 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

JULY 2021

25,4 MM (1”) HANDLEBARS (CONT)

25,4 MM (1”) TOURING HANDLEBARS• Notched for electronic throttle control• Seamless steel tubing with a chrome-plated, gloss black or flat black finish• Slotted for internal wiring• Available in smooth unknurled style unless noted

CHROME GLOSS BLACK FLAT BLACK DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACKFOR 08-20 FLHR, 08-13 FLTR0601-12131 0601-12141 - 25,5 cm (10”) Ape Hanger 25,5 cm (10”) 77 cm (30,5”) 21,5 cm (8,5”) 28 cm (11”)0601-12161 0601-12171 0601-3490 30,5 cm (12”) Ape Hanger 30,5 cm (12”) 79 cm (31”) 26 cm (10,25”) 30,5 cm (12”)0601-12201 0601-12211 - 35,5 cm (14”) Ape Hanger 38 cm (15” ) 81 cm (32”) 25,5 cm (10”) 28 cm (11”)0601-12221 0601-12231 - 40,5 cm (16”) Ape Hanger 40,5 cm (16”) 81 cm (32”) 20,5 cm (8”) 15 cm (6”)0601-1224 0601-1225 0601-4214 45,5 cm (18”) Ape Hanger 45,5 cm (18”) 81 cm (32”) 20,5 cm (8”) 15 cm (6”)0601-12281 0601-12291 - Beach bar 11,5 cm (4,5”) 91 cm (36”) 19,5 cm (7,75”) 36 cm (14,25”)FOR 08-20 FLHT/ FLHX AND H-D FL TRIKE (KNURLED)0601-5039 0601-5040 - 25,5 cm (10”) Ape Hanger 25,5 cm (10”) 97 cm (38”) 33 cm (13”) 19 cm (7,5”)0601-5041 0601-5042 - 30,5 cm (12”) Ape Hanger 30,5 cm (12”) 97 cm (38”) 33 cm (13”) 19 cm (7,5”)0601-5043 0601-5044 - 35,5 cm (14”) Ape Hanger 38 cm (15”) 97 cm (38”) 33 cm (13”) 19 cm (7,5”)0601-5045 0601-5046 - 40,5 cm (16”) Ape Hanger 40,5 cm (16”) 97 cm (38”) 33 cm (13”) 19 cm (7,5”)0601-5047 0601-5048 - 45,5 cm (18”) Ape Hanger 45,5 cm (18”) 97 cm (38”) 33 cm (13”) 19 cm (7,5”)1 TÜV approved.

Notched for electric throttle

0601-1222

Conventional

Batwing

0601-5040

0601-5045

CHROME GLOSS BLACK FLAT BLACK DESCRIPTION END RISE WIDTHCENTER WIDTH PULLBACK

0601-4188 0601-4189 - Buckhorn high 33 cm (13”) 84 cm (33”) 22 cm (8,75”) 34,5 cm (13,5”)0601-4172 0601-4173 0601-4174 Flat track 11,5 cm (4,5”) 77,5 cm (30,5”) 19 cm (7,5”) 20,5 cm (8”)0601-05751 - - Flat track 11,5 cm (4,5”) 77,5 cm (30,5”) 19 cm (7,5”) 20,5 cm (8”)

0601-4169 0601-4170 0601-4171 Superbar 89 mm (3,5”) 76 cm (30”) 14,5 cm (5,75”) 14,5 cm (5,75”)

0601-05761 - - Superbar 89 mm (3,5”) 76 cm (30”) 14,5 cm (5,75”) 14,5 cm (5,75”)

- - 0601-4175 Beach bar 11,5 cm (4,5”) 91 cm (36”) 19,5 cm (7,75”) 36 cm (14,25”)

0601-4215 0601-4216 - 15 cm (6”) Straight T-Bar 15 cm (6”) 60 cm (23,5”) 21,5 cm (8,5”) 0 cm (0”)0601-4218 0601-4219 - 20,5 cm (8”) Straight T-Bar 12,5 cm (5”) 60 cm (23,5”) 21,5 cm (8,5”) 29 cm (11,5”)

0601-4221 0601-4222 - 25,5 cm (10”) Straight T-Bar 25,5 cm (10”) 60 cm (23,5”) 21,5 cm (8,5”) 0 cm (0”)

0601-4224 0601-4225 - 15 cm (6”) Curved T-Bar 20,5 cm (8”) 79 cm (31”) 21,5 cm (8,5”) 0 cm (0”)0601-4227 0601-4228 - 20,5 cm (8”) Curved T-Bar 12,5 cm (5”) 79 cm (31”) 21,5 cm (8,5”) 29 cm (11,5”)

0601-4230 0601-4231 - 25,5 cm (10”) Curved T-Bar 15 cm (6”) 79 cm (31”) 21,5 cm (8,5”) 32 cm (12,5”)

0601-4160 0601-4161 0601-4162 Stick style - 76 cm (30”) - -

See chart for details

14 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

JULY 2021

DESIGNER KARBONFIBR HANDLEBAR INSTALLATION KITS• KARBONFIBR, Magnum Shielding’s newest Signature Series wire braid is created from distinct black and gray tone

wire colors which are blended and interwoven together to mimic the look of hi-tech carbon fiber• This unique alternative black braid highly complements black or blackout color scheme motorcycles• KARBONFIBR handlebar installation kits are available for 02-20 Touring and 18-21 Softail models• Kits include premium DOT brake lines, clutch cable or hydraulic clutch line, throttle and idle cables or

Throttle-By-Wire extensions, hardware and fully terminated or plug-and-play switch and turn signal extensions• Matching KARBONFIBR braided hydraulic lines and control cables provide a precise, OE fit• KARBONFIBR high-efficiency cables feature anti-friction liners and inserts, durable clear coating, are factory

lubricated for smooth, long-lasting operation and meet or exceed OE specifications• Clutch cables include a waterproof adjuster and a transmission fitting seal to eliminate oil leaks• Premium KARBONFIBR DOT brake lines incorporate PTFE tubing braided with DuPont™ Kevlar® Aramid Fiber reinforcement, Signature braid and a clear PVC jacketDuPont™ and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.

DESCRIPTION30,5 CM - 35,5 CM (12”-14”) APES

38 CM - 43 CM (15”-17”) APES

TOURINGFor 17-20 FLHRXS (w/ ABS) 0662-0809 -For 17-20 FLHRXS (w/ ABS) (reuses existing Lower) 0662-0810 0662-0811

For 08-13 FLHR (Non-ABS) 0662-0806 -For 08-13 FLHR (w/ ABS) 0662-0807 -For 08-13 FLHR (w/ ABS) (reuses existing Lower) 0662-0808 -

For 96-06 FLHR w/ or w/o Cruise 0662-0805 -For 08-13 FLHRC (Non-ABS) 0662-0806 -For 08-13 FLHRC (w/ ABS) 0662-0807 -For 08-13 FLHRC (w/ ABS) (reuses existing Lower) 0662-0808 -

For 02-06 FLHRC w/ or w/o Cruise 0662-0805 -For 02-06 FLHRS w/ or w/o Cruise 0662-0805 -For 19-20 FLHT (w/ ABS) 0662-0812 0662-0813For 19-20 FLHT (w/ ABS) (reuses existing Lower) 0662-0814 -

For 09-10 FLHT (w/ ABS) 0662-0807 -For 09-10 FLHT (w/ ABS) (reuses existing Lower) 0662-0808 -

For 08-09 FLHT (Non-ABS) 0662-0806 -For 02-06 FLHT (Non-ABS) 0662-0805 -For 08-13 FLHTC (Non-ABS) 0662-0806 -For 08-13 FLHTC (w/ ABS) 0662-0807 -For 08-13 FLHTC (w/ ABS) (reuses existing Lower) 0662-0808 -

For 02-06 FLHTC (Non-ABS) 0662-0805 -For 08-13 FLHTCU (Non-ABS) 0662-0806 -For 08-13 FLHTCU (w/ ABS) 0662-0807 -For 08-13 FLHTCU (w/ ABS) (reuses existing Lower) 0662-0808 -

For 02-06 FLHTCU (Non-ABS) 0662-0805 -For 17-19 FLHTCUL (w/ ABS) 0662-0812 0662-0813For 17-19 FLHTCU/L (w/ ABS) (reuses existing Lower) 0662-0814 -

For 17-20 FLHTKSE CVO (w/ ABS) 0662-0812 0662-0813For 17-20 FLHTK/L (w/ ABS) 0662-0812 0662-0813For 17-20 FLHTK/L (w/ ABS) (reuses existing Lower) 0662-0814 -

For 10-13 FLHTK (w/ ABS) 0662-0807 -For 10-13 FLHTK (w/ ABS) (reuses existing Lower) 0662-0808 -

DESCRIPTION30,5 CM - 35,5 CM (12”-14”) APES

38 CM - 43 CM (15”-17”) APES

TOURING (CONT)For 17-20 FLHXSE CVO (w/ ABS) 0662-0812 0662-0813For 17-20 FLHX/S (w/ ABS) 0662-0812 0662-0813For 17-20 FLHX/S (w/ ABS) (reuses existing Lower) 0662-0814 -

For 08-13 FLHX (Non-ABS) 0662-0806 -For 08-13 FLHX (w/ ABS) 0662-0807 -For 08-13 FLHX (w/ ABS) (reuses existing Lower) 0662-0808 -

For 06 FLHX w/ or w/o Cruise 0662-0805 -For 08-13 FLTR (Non-ABS) 0662-0806 -For 02-06 FLTR (Non-ABS) 0662-0805 -For 20 FLTRK (w/ ABS) 0662-0815 0662-0816For 20 FLTRK (w/ ABS) (reuses existing Lower) 0662-0817 0662-0818

For 17-19 FLTRU (w/ ABS) 0662-0815 0662-0816For 17-19 FLTRU (w/ ABS) (reuses existing Lower) 0662-0817 0662-0818

For 08-13 FLTRU (w/ ABS) (reuses existing Lower) 0662-0808 -

For 18-20 FLTRXSE CVO (W/ ABS) 0662-0815 0662-0816For 17-20 FLTRXS (w/ ABS) 0662-0815 0662-0816For 17-20 FLTRXS (w/ ABS) (reuses existing Lower) 0662-0817 0662-0818

For 17-20 FLTRX (w/ ABS) 0662-0815 0662-0816For 17-20 FLTRX (w/ ABS) (reuses existing Lower) 0662-0817 0662-0818

For 08-13 FLTRX (w/ ABS) (reuses existing Lower) 0662-0808 -

SOFTAILFor 18-20 FLDE (w/ ABS) 0662-0819 0662-0820For 18-21 FLFB/S (w/ ABS) 0662-0819 0662-0820For 18-21 FLHC/S (w/ ABS) 0662-0819 0662-0820For 18-21 FLSB (w/ ABS) 0662-0819 0662-0820For 18-21 FLSL (w/ ABS) 0662-0819 0662-0820For 18-21 FXBB/S (w/ ABS) 0662-0819 0662-0820For 18-20 FXBR/S (w/ ABS) 0662-0819 0662-0820For 18-21 FXFB/S (w/ ABS) 0662-0821 -For 18-20 FXLR (w/ ABS) 0662-0819 0662-0820For 20-21 FXLRS (w/ ABS) 0662-0821 -For 20-21 FXST (w/ ABS) 0662-0819 0662-0820

0662-0809

15 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

JULY 2021

HANDLEBAR CABLE KIT REPLACEMENT BRAKE LINES • Available in Midnight, Stainless or Black Vinyl/ Stainless for models listed

BLACK VINYL/ STAINLESS BRAKE LINESPART # DESCRIPTIONFOR 18-21 FXLRS/ FXFB/ FXFBS W/ ABS1741-6238 For use w/ mini Ape Hangers1741-6241 For use w/ 30,5 cm - 35,5 cm (12”-14”) Ape Hangers1741-6244 For use w/ 38 cm - 43 cm (15”-17”) Ape Hangers1741-6247 For use w/ 45,5 cm - 51 cm (18”-20”) Ape Hangers

MIDNIGHT BRAKE LINESPART # DESCRIPTIONFOR 18-21 FXLRS/ FXFB/ FXFBS W/ ABS1741-6239 For use w/ mini Ape Hangers1741-6242 For use w/ 30,5 cm - 35,5 cm (12”-14”) Ape Hangers1741-6245 For use w/ 38 cm - 43 cm (15”-17”) Ape Hangers1741-6248 For use w/ 45,5 cm - 51 cm (18”-20”) Ape Hangers

STAINLESS BRAKE LINESPART # DESCRIPTIONFOR 18-21 FXLRS/ FXFB/ FXFBS W/ ABS1741-6237 For use w/ mini Ape Hangers1741-6240 For use w/ 30,5 cm - 35,5 cm (12”-14”) Ape Hangers1741-6243 For use w/ 38 cm - 43 cm (15”-17”) Ape Hangers1741-6246 For use w/ 45,5 cm - 51 cm (18”-20”) Ape Hangers

1741-6237

1741-6238

1741-6239

CHAIN-DRIVE CLUTCH BASKET• Stronger than OEM• Hard-anodized finish• Primary chain sprocket and 106T starter ring gear included• Dual retaining ring design allows the use of 07-17 Twin Cam or

17-21 M-Eight style clutch hub bearing (sold separately)

PART # DESCRIPTION1120-0430 For 17-21 M-Eight and 07-17 Twin Cam

ALTERNATOR STATOR• Meets or exceeds OEM specifications and features precise construction

PART # DESCRIPTION2112-1515 For 08-17 FXS/ FXST/ FLS/ FLST models; repl. OEM #30017-08

CAM CHAIN TENSIONERS• High quality replacement components• Sold each

PART # DESCRIPTIONFOR 99-06 TWIN CAM (EXCEPT 06 DYNA)0950-0960 Primary chain tensioner; repl. OEM #39954-99/ 39954-99A

PART # DESCRIPTIONFOR 99-06 TWIN CAM (EXCEPT 06 DYNA) (CONT)0950-0961 Secondary chain tensioner; repl. OEM #39964-99/ 39964-99A

0950-0960

16 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

JULY 2021

FLARE™ WINDSHIELDS• Manufactured from dual-side, hard-coated polycarbonate

material for outstanding impact strength• Innovative design features “hips” at the outer edge of the shield

that re-routes the air to add downforce and aid stability• Installs easily using stock mounting hardware, maintains stock adjustability• FLARE at the top sends clean, less turbulent air to rider and passenger• Choose from tint and dark smoke color options

PART # COLOR HEIGHTFOR 20-21 CHALLENGER2312-0835 Tint 28 cm (11”)2312-0836 Dark smoke 28 cm (11”)

2312-0835

2312-0836

RYT-THERE SHELF SETS• Easy, no-tool adhesive-backed installation to keep your belongings

protected and more accessible in your saddlebags• Antimicrobial to resist mold and mildew• Sold in pairs

COLOR PART #FOR 14-21 FLHT, FLHX/S, FLTRX/S, FLTRU AND FLTRKCharcoal 3501-1807Gray 3501-1808Tan 3501-1809FOR 05-13 FLHT, FLHX/S, FLTRX, FLTRU AND FLHTKCharcoal 3501-1812Gray 3501-1813FOR 18-21 FLHC/SCharcoal 3501-1810Gray 3501-1811

3501-1807 3501-1809

3501-18103501-1813

990/ 970 SERIES SHOCK RESERVOIR MOUNT BRACKET KIT• Allows 990 or 970 series shocks with remote reservoirs to

be mounted on top of the rear fender strut covers• Easy access to the compression adjustment knobs• Mounting hardware included

PART # DESCRIPTION1313-0209 For 09-21 HD touring models

17 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

JULY 2021

ACCUTRONIXAccutronix continues to expand their lineup of exciting parts and accessories for American V-Twins. Their Elite handlebar risers and Tribal handlebar grips are now available with a brilliant solid black anodized finish that adds a sinister, bold look to your bike.

ELITE CUSTOM RISER KITS• Machined from 6061-T6 billet aluminum

and brilliantly black anodized• Uniquely designed top caps conceal

the handlebar clamp bolts• Matches other Accutronix Elite products• Fit 25 mm (1”) handlebars• 50 mm (2”) diameter top, 38,1 mm

(11/2”) diameter bottom• Threads are 1/2”-13• Sold in pairs

PART # DESCRIPTIONFOR STANDARD TRIPLE TREES0602-1199 50 mm (2”)0602-1201 152 mm (6”)0602-1202 203 mm (8”)0602-1203 152 mm (6”) w/ 88,9 mm (31/2”) pullback

PART # DESCRIPTIONFOR FXSTS TRIPLE TREES0602-1205 101 mm (4”)0602-1206 152 mm (6”)0602-1207 203 mm (8”)

TRIBAL GRIPS• Machined from 6061-T6 billet

aluminum and brilliantly solid black• All left grips are secured with three

setscrews; all right grips come with throttle sleeve installed

• Fits 25 mm (1”) bars• Match Accutronix’s Tribal collection:

forward controls, foot and toe pegs and head bolt covers

• Sold in pairs

PART # DESCRIPTION

0630-2785For 08-20 FLHT/ FLHR/ FLTR/ FLHX, H-D FL Trike, 16-20 Softail, 20 ELW,16-17 FXDLS, 13-15 FXSBSE, 14-15 FLSTNSE, 11-12 FLSTSE models

0630-2786 For 82-17 Big Twin and 82-21 XL models (except 16-20 Softail, 16-17 FXDLS, 08-20 Dresser, H-D FL Trike, 13-15 FXSBSE, 14-15 FLSTNSE, 11-12 FLSTSE, and models w/ air-assisted forks)

0630-2785

ELITE FRONT AXLE CAPS• CNC-machined 6061-T6 billet

aluminum with a chrome finish• Setscrew for easy installation• Matches the end caps on Accutronix

forward controls, rubber foot and toe pegs, handlebar grips and risers

• Sold in pairs

PART # DESCRIPTION

0214-1983For 08-20 FLHT/ FLHTK/ FLHX/ FLHR/ FLHRXS, 07-17 FXS/ FXST/ FLS/ FLST (except Springers), 10-17 FXD/ FXDWG models (25 mm axle)

0214-1982 For 00-07 FLHT/ FLHX/ FLHR, 04-07 FXD models (25 mm (1”) axle)

VO2 CAGE FIGHTER AIR INTAKE KITS• Designed for maximum airflow to the filter

element while providing a custom look• Include washable high-flow filter element• Feature large inlet backing plate and billet venturi• Available in matte black finishNOTE: 114” M-Eight™ Softails will require OEM

support bracket PART #16400049 to install.

DESCRIPTION PART #For 17-21 FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU models 1010-2799For 18-21 FXBB/ FXBR/ FXFB/ FXLR/ FLDE/ FLFB/ FLHC/ FLSB/ FLSL/ FXST models 1010-2801For 01-17 Twin Cam w/ Delphi EFI, 99-06 Twin Cam models w/ CV carb (except 08-17 FLHT/ FLHR/ FLHX/ FLTR/H-D FL Trikes, 16-17 FXDLS, 16-17 Softails, 14-15 FLSTNSE, 13-14 FXSBSE, 11-12 FLSTSE)

1010-2802

For 91-21 XL models 1010-2803

1010-2799 1010-2802

0602-1199

0602-1203

0602-1206

18 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

JULY 2021

CHAIN DRIVE CAMCHEST KITS FOR M-EIGHT• All parts in each kit are matched to ensure superior

quality, fit, finish and performance• Oil pump and cam plate are precision-machined from

billet aluminum with a blue anodized finish• Passage plugs are removable for servicing• Independent scavenge sections for the flywheel cavity and cam chest• Debris screens in both scavenge pickups• Increased oil flow capacity on both the feed and scavenge sides• Adjustable pressure relief valve is adjustable

with the unit installed in the engine• S&S Quickee Pushrods with chrome pushrod tubes• S&S premium tappets• Billet aluminum tappet cuffs have a hard-anodized black coating

and are stronger than stock to eliminate distortion• Improves tappet stability in high-lift situations• 465 Torque Cam kits are the ideal choice for Touring bike applications• 540 kits are for Touring bikes to add torque below 6000 rpm• All kits include necessary gaskets, bearings and

hardware required for a complete installation• See the Parts Europe 2021 FatBook for additional camchest kits for M-Eight

CHAIN DRIVE KITS FOR 17-21 TWIN-COOLED™ M-EIGHTPART # DESCRIPTIONCHROME PUSHROD TUBES0925-1361 W/ 550 camGLOSS BLACK PUSHROD TUBES0925-1357 W/ 465 cam

CHAIN DRIVE KITS FOR 17-21 OIL-COOLED M-EIGHTPART # DESCRIPTIONCHROME PUSHROD TUBES0925-1362 W/ 550 camGLOSS BLACK PUSHROD TUBES0925-1359 W/ 465 cam

TOP END GUARDIAN KIT• Everything needed to strengthen the top end of your M-Eight engine• Rocker arm shafts are more durable than the stock arms• Roller rocker arms relieve additional stress caused by

high-lift camshafts running and high rpms• Rocker arm stud kit extends the life of your cylinder heads

by preventing damage to the rocker arm towers• Head bolt kit is made of 8640 heat-treated steel

with 200.000 psi tensile strength• Cold-rolled threads and formed washer make

these head bolts durable and reusable• Sold as a kit; includes S&S rocker arm stud kit, S&S rocker arm

shafts (set of 4; repl. OEM #17300059B), S&S forged steel rocker arms (set of 4; repl, OEM #s 17300053 and 17300055) and S&S head bolt kit (eight 12-point black oxide-coated head bolts)

PART # DESCRIPTION0927-0042 For 17-21 M-Eight

55 MM PERFORMANCE INTAKE MANIFOLD• Manifold has a full 55 mm diameter intake opening for more airflow• Lets your engine breathe better - a must-have

upgrade for 124” and larger engines• CNC-machined T6 heat-treated cast aluminum construction• Adds horsepower• More heat-resistant than the OEM polymer intake manifold• Includes new rubber O-ring seal

PART # DESCRIPTION1050-0456 For 17-21 M-Eight

0925-1357

0925-1361

19 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

JULY 2021

PLUGZ™ ANTENNA GROMMET LIGHTS• Each unit encases 40 red LEDs

behind a faceted lens producing a smooth, bright lens illumination

• Dual-intensity dim red running light with high intensity function

• Red or smoke lens with chrome or gloss black trim

• Compatible with wire adapters PART #s 2050-0420, 2050-0421, 2050-0422, 2050-0423; sold separately

• Plug-and-play technology• Sold in pairs

PART # DESCRIPTIONFOR 06-21 FLHX/ FLHXS, 15-21 FLTRX/ FLTRXS/ FHRS 10-13 FLTRXS2040-2744 Red lens, gloss black trim2040-2745 Red lens, chrome trim2040-2746 Smoke lens, gloss black trim2040-2747 Smoke lens, chrome trim

2040-2745

QUICK-DISCONNECT TOUR PAK LIGHTING POWER HARNESS• Compatible with OEM Tour Pak lighting on 14-21 Harley-Davidson models• Provides connections to power side arm marker lights and charging port• Mates to Tour Pak quick-disconnect harnesses (PART #s 2130-0267,

2050-0386, 2050-0384; see page 1134 of the Parts Europe 2021 FatBook)

PART # DESCRIPTION2120-1097 Quick-disconnect Tour Pak lighting power harness

TOUR PAK SPEAKER POWER HARNESS• Plugs in under the front fairing• 229 cm (90”) 18 AWG wires

route under the tank and to the rear speakers

• Provides connections to OEM 16-port flat audio connector to power left and right speakers

• Plug-and-play technology

PART # DESCRIPTION

2120-1098For 14-21 FLHX/ FLHXS/ FLHXSE, 15-21 FLTRX/ FLTRXS/ FLTRXSE/ FLHT models

MPR EXTENSION HARNESSES FOR JAE 4-PIN PLUG• Allows for three Custom Dynamics lighting accessories• Compatible with Custom Dynamics® four-wire dual-color or sequential

plug-and-play products with four-pin accessory ports• Plug-and-play technology• Sold in pairs

PART # DESCRIPTION2120-1096 MPR Extension Harnesses

PROGLOW™ LED ACCENT LIGHT WIRE EXTENSIONS AND SPLITTERS• All sold in pairs unless noted

PART # DESCRIPTION2120-1099 15 cm (6”) wire extension2120-1100 30,5 cm (12”) wire extension2120-1101 61 cm (24”) wire extension2120-11021 112 cm (44”) wire extension with 5-way splitter2120-1103 18 cm (7”) Y-splitter2120-1104 35,5 cm (14”) Y-splitter2120-1105 18 cm (7”) 3-way splitter1 Sold each.

PROGLOW™ END CAPS• Fits 12VDC systems; ProGLOW™ accent light systems• Pack includes three loop caps for completing the end of each

channel and four dummy caps for waterproofing

PART # DESCRIPTION2120-1106 Endcaps (7-pk.)

2120-1099 2120-1102 2120-1104

20 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

JULY 2021

FORGED BILLET Y-SPOKE RIMS• All rims are CNC-machined from radial

forged 6061-T6 aluminum for maximum road durability and strength-to-weight ratio

• Features a rolled rim lip for the custom look and detailed CNC machine work from the center of the hub to the edge of the rim

• Rims can be used on both front and/or rear applications when correct hub kit is installed (sold separately)

• Rims accept Arlen Ness hub kits, which allow full wheels to be assembled in minutes with basic tools

NOTE: Arlen Ness hub kits must be purchased separately to install. Please see the 2021 Parts Europe FatBook or the Parts Europe Indian catalog for required hub kits. D

AB

C

E

SIX-PISTON DIFFERENTIAL BORE FRONT BRAKE CALIPERS • CNC-machined from billet aluminum• Differential bore for optimal and

consistent braking performance• Compatible with ABS brake systems• Designed and engineered to be extremely rigid

and perform consistently in all braking scenarios• Cooling fins are CNC-machined into each

side of the inner caliper to disperse heat• Available for 11,8” brake rotors• Brake caliper rebuild kit

available; sold separately

PART # DESCRIPTIONFOR 08-21 FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU, 18-21 SOFTAIL, 06-17 FLST, 06-17 FXD, 14-21 XL W/ 11,8” ROTORS1701-0691 Left caliper, red1701-0692 Right caliper, blue

PART # DESCRIPTION1702-0499 Six-Piston brake caliper rebuild kits

1701-0691

1701-0692

1702-0499

FOUR-PISTON BRAKE CALIPER REBUILD KIT • For Arlen Ness Four-Piston brake calipers; sold separately

(see page 1334 of the 2021 Parts Europe FatBook)

PART # DESCRIPTION1702-0500 Four-Piston brake caliper rebuild kit

DESCRIPTION (A) BLACK (B) BLUE (C) GOLD (D) RED (E) TITANIUMFRONT RIMS19” x 3.25” 0210-0377 0210-0379 0210-0380 0210-0381 0210-038221” x 3.50” - 0210-0374 - 0210-0376 -REAR RIMS18” x 5.50” - 0210-0373 - - -