Product NewsTHE DRAG SPECIALTIES MAY 2019

1 +49 (0) 6501 96 95 -2000 • partseurope.eu

SUPERSTREET 2-INTO-1 EXHAUST SYSTEMS• Classic 2-into-1 styling• Headers and muffler are fully heat shielded for a blue-proof design• Stainless steel header construction• S&S engineered high-flow catalysts (49-state systems)

FOR 18-19 FXBB, FXLR, FLSL, FXFB, FLDEPART # DESCRIPTION49-STATE1800‑24031 Black w/ black end cap1800‑24021 Chrome w/ black end cap

PART # DESCRIPTIONRACE ONLY1800‑24012 Black w/ black end cap1800‑24002 Chrome w/ black end cap

BIG SHOTS STAGGERED 2-INTO-2 EXHAUST SYSTEMS• Features the revolutionary Power Chamber™ design; a unique

cross-over system that increases horsepower and torque• Armed with full-coverage 21/2” heat shields that are

essentially blue-proof for long-lasting style• Like all Vance & Hines systems, these feature

a superior fit and an unrivaled finish• Flat plane mounting panel for the 12 mm O2 sensors;

mounting panel positions sensor deeper into exhaust stream, providing enhanced data feedback to the ECM

PART # DESCRIPTIONFOR 18-19 FXBB/ FXFB/ FXLR/ FLDE/ FLHC/ FLSB/ FLSL MODELS1800‑2392 Black1800‑2391 Chrome

1800-24031800-2402

1800-2392 1800-2391

1 Qualified Manufacturer Declared 49-state Federal Emissions Compliant Catalyst Exhaust System. Not legal for sale or use in California on any pollution-controlled vehicle.

2 For closed-course competition use only. Not intended for street use. Legal in California only for racing vehicles which may never be used, registered or licensed for use upon a highway.

• Meticulously finished billet end caps• Removable baffles and all mounting hardware includedNOTE: PART #1861-1250 is required for FLHC and FLSB models.

• Oxygen sensor ports allow the use of wide band or stock O2 sensors• Models with mid controls require brake pedal kit

PART #1861-1354 (sold separately)• Removable dB reducer (included) meets SAE J2825 sound standard

2 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2019

NON-LOCKING DETACHABLE TOUR-PAK® MOUNTING RACKS• Made of 12-gauge steel tubing; available in chrome,

matte black and gloss black• Quickly detach without thumb curling, finger twisting and knuckle chomping• Allows removal of the rack with a quick pull on the levers• Max capacity: 4,5 kg (10 lb.)• Measure approximately 28 cm x 25,5 cm (11” x 10”)• Docking kits sold separately (see the 2019 Parts Europe FatBook)NOTE: FLHX/ FLTRX, FLTRSE/3 and FLHXSE/2 models require

Tour-Pak® Antenna Relocation kit HD #76556-09.

PART # DESCRIPTIONFOR 14-19 FLHT/ FLHX/ FLHR/ FLTRX, FLHXSE/2/3, FLTRSE3/ FLTRXSE1510‑0465 Chrome1510‑0466 Matte black1510‑0467 Gloss black

1510-0466

COMMUTER TAIL/ SEAT BAGS• Industry-leading UltraMax® fabric with maximum UV protection• Perfect size for light traveling• Easily mount to most tail sections and seats• Mount with four quick-release straps• Molded EVA lid with Fibertech “carbon-like” accents• Bags maintain shape, have reflective piping and a lined interior• Lockable reverse coil zippers and hi-density rubber zipper pulls• Inside self-fastening straps to better secure contents• Flush mount reflective handle and mesh• 100% waterproof rain cover and adjustable shoulder/ backpack strapPART # DESCRIPTION3516‑0276 Lite

PART # DESCRIPTION3516‑0277 Sport

PART # DESCRIPTION3516‑0278 Touring

3516-0276 3516-0277 3516-0278

3516-0278 Expanded

• Lite version’s main compartment measures: 28 cm L x 25,5 cm W x 16,5 cm H (11” x 10” x 6,5”); 28 cm L x 25,5 cm W x 21,5 cm H (11” x 10” x 8,5”) when expanded

• Lite version holds 11,71 liters (15,32 liters expanded)• Sport version’s main compartment measures 33 cm L x 28 cm W x 18 cm H

(13” x 11” x 7”); 33 cm L x 28 cm W x 23,5 cm (13” x 11” x 9,5”) when expanded• Sport version holds 16,41 liters (22,26 liters expanded)• Touring version measures 35,5 cm L x 30,5 cm W x 23 cm H (14” x 12” x 9”);

35,5 cm L x 30,5 cm W x 30,5 cm H (14” x 12” x 12”) when expanded• Touring version holds 24,78 liters (33,04 liters expanded)• Fully expandable with a protective base material

Shown with rain cover

3 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2019

ROAD SOFA LS SEATS• Tall lumbar support and wide driver saddle support the

back and legs for superior comfort, while the streamlined nose improves the rider’s reach to the ground

• Refined split-cushion design maximizes long-range comfort by separating the seating surface from the lumbar support to reduce tailbone and back pressure

• SaddleGel™ in front and rear reduces tailbone pressure and increases circulation and comfort for both driver and passenger

• Ventilated soft leather upholstery provides a luxurious look and ride• Made with perforated leather inserts and weatherproof,

no-maintenance-required SaddleHyde™

• Includes a fitted rain cover specially designed to protect seat from water and dirt

• Matching passenger backrest/ trunk pad (sold separately) completes the custom look

PART # DESCRIPTIONFOR 14-18 CHIEF CLASSIC, 16-19 CHIEF/ CHIEFTAIN DARK HORSE, 14-19 CHIEF VINTAGE/ CHIEFTAIN, 18-19 CHIEFTAIN CLASSIC, 17-18 CHIEFTAIN ELITE, 17-19 CHIEFTAIN LIMITED, 15-19 ROADMASTER, 16-19 SPRINGFIELDUNHEATED0810‑2088 W/o backrest0810‑2090 W/ backrestHEATED0810‑2089 W/o backrest0810‑2091 W/ backrestBACKREST0822‑0381 Passenger backrest/ trunk pad

ROAD SOFA PT SEATS• Tall lumbar support and wide driver saddle support the

back and legs for superior comfort, while the streamlined nose improves the rider’s reach to the ground

• Refined split-cushion design maximizes long-range comfort by separating the seating surface from the lumbar support to reduce tailbone and back pressure

• SaddleGel™ in front and rear reduces tailbone pressure and increases circulation and comfort for both driver and passenger

• Genuine pillow-top styling provides a luxurious look and ride• Made with pillow-top inserts inserts and weatherproof,

no-maintenance-required SaddleHyde™

• Includes a fitted rain cover specially designed to protect seat from water and dirt

• Matching passenger backrest/ trunk pad (sold separately) completes the custom look

PART # DESCRIPTIONFOR 14-18 CHIEF CLASSIC, 16-19 CHIEF/ CHIEFTAIN DARK HORSE, 14-19 CHIEF VINTAGE/ CHIEFTAIN, 18-19 CHIEFTAIN CLASSIC, 17-19 CHIEFTAIN LIMITED, 15-19 ROADMASTER, 16-19 SPRINGFIELDUNHEATED0810‑2092 W/o backrest0810‑2094 W/ backrestHEATED0810‑2093 W/o backrest0810‑2095 W/ backrestBACKREST0822‑0382 Passenger backrest/ trunk pad

0810-2088

0810-2091

0810-2093

0810-2094

0822-0382

0822-0381

4 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2019

LOW-PROFILE SOLO SEATS• Features solar-reflective leather in the seating area and

automotive-grade vinyl on the sides; patented process reduces surface temperature by as much as 14 °C (25 °F) for a cooler seat, higher durability and longer life over conventional leather or vinyl

• Flexible urethane foam interior for maximum comfort• 5 mm (3/16”) ABS thermoformed seat base with carpeted

bottom and rubber bumpers to protect paint• EZ Mount system requires no tools for taking seat on and off• Seat geometry places rider 51 mm (2”) further back and up to

25 mm (1”) lower (depending on model) than stock seat• Lower position creates better rider position with improved styling• Seat covers the two seat fender studs for a low, clean look• Can be used with Solo rears PART #s 0801-1053 and 0801-1054

(sold separately in the 2019 Parts Europe FatBook)• Includes mounting hardwareNOTE: 97-07 FLHR/ FLHX seats will also fit 97-07 FLT/ FLHT/ FLTR

models when used with lower dash extension PART #2202-0070 (see the 2019 Parts Europe FatBook).

PART # DESCRIPTIONFOR 97-07 FLHR, 06-07 FLHX MODELS (60,5 CM L X 30,5 CM W X 38 MM H) (233/4” X 12” X 11/2”)0801‑1155 Double diamond, black0801‑1156 Double diamond, silver

LOW-PROFILE SOLO SEATS WITH FORWARD POSITIONING• Features solar-reflective leather in the seating area and

automotive-grade vinyl on the sides; patented process reduces surface temperature by as much as 14 °C (25 °F) for a cooler seat, higher durability and longer life over conventional leather or vinyl

• Flexible urethane foam interior for maximum comfort• 5 mm (3/16”) ABS thermoformed seat base with

carpeted bottom to protect paint• EZ Mount system requires no tools for taking seat on and off• 08-19 fitment moves rider forward approximately

25 mm (1”) compared to stock seat depending on model; 99-07 fitment moves rider forward approximately 51 mm (2”) compared to standard low profile seat

• Lowers rider up to 25 mm (1”) lower than stock seat depending on model

• Lower position creates better rider position with improved styling• Seat covers the two seat fender studs for a low, clean look• Includes mounting hardware• Can be used with Solo rears PART #s 0801-1053 and 0801-1054

(sold separately in the 2019 Parts Europe FatBook)NOTE: 97-07 FLHR/ FLHX seats will also fit 97-07 FLT/ FLHT/ FLTR

models when used with lower dash extension PART #2202-0070. (see the 2019 Parts Europe FatBook).

PART # DESCRIPTIONFOR 08-19 FLHT/ FLHR/ FLTR/ FLTRU/ FLHX MODELS (60,5 CM L X 34,5 CM W X 44 MM H) ( 233/4” X 131/2” X 13/4”)0801‑1157 Double diamond, black0801‑1158 Double diamond, silverFOR 97-07 FLHR, 06-07 FLHX MODELS (61 CM L X 30,5 CM W X 38 MM H) ( 24” X 12” X 11/2”)0801‑1159 Double diamond, black0801‑1160 Double diamond, silver

EZ-ON SOLO SEATS• EZ-on system features an internal rubber mount/ stud system

that allows for easy installation and removal• No tools needed• Automotive-grade vinyl covers• Select style has solar-reflective leather in the seating area and automotive-grade vinyl

on the sides; patented process reduces surface temperature by as much as 14 °C (25 °F) for a cooler seat, higher durability and longer life over conventional leather or vinyl

• Molded, flexible urethane foam interior for maximum comfort and styling• Seat is made more narrow up front• 5 mm (3/16”) ABS thermoformed seat base for a perfect fit; fully

carpeted bottom with rubber bumpers to protect paint• Compatible with fender skinsPART # DESCRIPTIONFOR 18-19 FLHC/ FLDE/ FLSL (61 CM L OVERALL X 33 CM W) ( 24” X 13”)0802‑11481 Smooth0802‑1149 Smooth solar leather0802‑11501 Scorpion stitch0802‑11511 Scorpion silver stitch1 Not solar-reflective leather.

0801-1156

0801-11600801-1157

0802-11480802-1149

0802-1150 0802-1151

0801-1155

5 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2019

POWER COMMANDER V• Fuel and timing control• Rev Xtend increases Rev limit• The Power Commander V can read the exact engine

temperature through the bike’s ECM, which allows the tuner to choose how much fuel to add during cold starts

• Cold starting on heavily modified engines should be more controllable and easy to adjust

• USB powered from computer• Two position map-switching function built in (switch not included)• Can add any SPST switch and toggle between two different fuel/ timing maps• Gear/ speed input allows for map adjustment based on gear• Analog input allows user to install any 0-5 volt sensor• Builds an adjustment table based on analog input, such as boost or temperature• Power Commander V is capable of allowing each cylinder to be mapped

individually and for each gear with the gear position input connected• Ten throttle position columns• World’s largest dyno-tested map database• Enhanced “accel pump” utility

PART # DESCRIPTION1020‑2895 For 10-13 XL8831020‑1119 For 10-13 XL1200

CRANK POSITION SENSOR• High-quality replacement sensorPART # DESCRIPTION1022‑0198 For 95-98 FLHT/ FLHR/ FLTR; repl. OEM #32447-951022‑0199 For 04-05, 10-12 XL; repl. OEM #32804-04B

E3 RESISTOR SPARK PLUG• Unique electrode shape maximizes the power created

by the spark plug – Diamond Fire technology• Electrode is a combination of performance and technology

that results in an improved flame kernel shape• This flame front ignites the bulk air/ fuel mixture faster,

moves heat into the combustion chamber faster and creates a more localized pressure front for faster pressure rise during the cylinder power stroke

• The result is more complete combustion and an improvement in engine performance

• A truly premium performance plug• Sold eachPART # DESCRIPTION NGK REF H‑D REF2103‑0432 For 17-19 M-Eight,

15-19 XG500/ 750/ 750A modelsCPR6EB-9, CPR7EA-9, CPR7EAIX-9, MR7F HD6R10

1022-0198

1022-0199

6 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2019

LED TURN SIGNALS• CNC-machined aluminum

housing with dual-function LEDs potted in injection molded polycarbonate lens

• Will fit any H-D model with tear drop shaped standoff

• Available in chrome, black anodized, or raw machine finish

• Sold in pairsPART # DESCRIPTIONFOR 98-19 FLTR/ FLTRX AND 06-19 FLHX MODELS2020‑1722 Chrome smoke/ amber lens2020‑1723 Black smoke/ amber lens2020‑1724 Raw smoke/ amber lens2020‑1725 Chrome smoke/ red lens2020‑1726 Black smoke/ red lens2020‑1727 Raw smoke/ red lens2020‑1728 Chrome red/ red lens2020‑1729 Black red/ red lens2020‑1730 Raw red/ red lens

LED DRIVING/ SIGNAL LIGHTS• Feature white high

visibility driving lights that flash amber when using turn signals

• CNC-machined aluminum housings with bright LEDs and smoked polycarbonate lenses

• Designed to mount to existing turn signal mounts

• Available in chrome, black anodized or raw finish

• Sold in pairsPART # DESCRIPTIONFOR 06-19 FLHX 98-19 FLTR/ FLTRX MODELS2020‑1763 Chrome smoke/ white lens2020‑1764 Black smoke/ white lens2020‑1765 Raw smoke/ white lens

STRUT LIGHTS• CNC-machined

aluminum housings• Injection molded

polycarbonate lenses• Dual-function red LEDs

w/ 70° viewing angle• Available in anodized

black or raw finish• Sold in pairsPART # DESCRIPTIONFOR 18-19 FXBB/ FLSL MODELS2020‑1766 Smoke lens, anodized black finish2020‑1767 Red lens, anodized black finish2020‑1768 Smoke lens, raw finish2020‑1769 Red lens, raw finish

2020-1766

2020-1769

2020-1763

2020-1764

2020-1722

2020-1727

2020-1729

LED SADDLEBAG RAIL LIGHT BARS• Add additional running and brake lights• One row of six 5 mm LEDs are sealed behind a red or smoked lens in each unit• Install to underside of the saddlebag rails placing the light bars at eye level• Plug and play with provided mounting hardware• Sold in pairsPART # DESCRIPTIONFOR 14-19 FLHX/ FLTRX/ FLHR/ FLHTCU/ FLHTCUL/ FLTRU/ FLHTK/ FLHTKL MODELS W/ AIR WING SADDLEBAG RAILS2040‑2339 Red lens2040‑2340 Smoke lens

2040-2339

2040-2340

7 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2019

POWERSTANDS RACINGPSR is known for superior-quality parts and accessories for sports bikes. Now they have created an elegant line of fully adjustable levers for American V-Twin motorcycles. Each lever is machined from high-quality aluminum for a luxurious look and feel. The levers are fully adjustable so the rider can custom-fit the reach to the lever to add an additional custom touch that personalizes the controls to their exact reach.

ADJUSTABLE LEVER SETS• Easily adjust lever to bar reach for individual

riders (limited inward adjustment)• CNC-machined from high quality aluminum• Available in black, chrome or contrast black• Sold in pairsPART # DESCRIPTIONFOR 18-19 INDIAN CHIEF/ CHIEFTAIN, SPRINGFIELD, ROADMASTER0610‑2140 Anthem, chrome0610‑2141 Anthem, black0610‑2142 Anthem, contrast0610‑2135 Journey, chrome0610‑2136 Journey, black

PART # DESCRIPTIONFOR 15-19 INDIAN SCOUT/ SCOUT SIXTY, 18-19 SCOUT BOBBER0610‑2137 Anthem, chrome0610‑2138 Anthem, black0610‑2139 Anthem, contrast0610‑2133 Journey, chrome0610‑2134 Journey, black

THRESHER GRIPS• Combine a soft, shark tooth-inspired, knurled rubber texture

with an ergonomic profile that contours to the shape of your hands for unbeatable comfort and control

• Features a wider diameter for thumb, index and middle fingers and a tapered outer profile for ring and pinky

• Premium, durable EPDM rubber compound will not harden, crack or wear over time and provides an ultra-soft, “cushiony” feel for all-day vibration-dampening comfort

• Assembled with OEM-specific throttle tube and feature a “glueless” clutch grip offering easy installation or removal for handlebar swaps

• Available in chrome or satin black with aluminum trim• Sold in pairsPART # DESCRIPTIONFOR 18-19 CHIEF CLASSIC, CHIEFTAIN, DARK HORSE, SPRINGFIELD AND VINTAGE MODELS0630‑2543 Chrome0630‑2544 Satin blackFOR 15-19 SCOUT/ SCOUT SIXTY/ SCOUT BOBBER MODELS0630‑2541 Chrome0630‑2542 Satin black

0630-25410630-2544

STAR SERIES HANDGUARD MOUNTING KIT• Mounting kit for Star Series handguards• Brackets are CNC-machined

from 6061-T6 aluminum• Black anodized finish that matches

stock Harley-Davidson controls• For Star Series handguards and turn signal kit,

please see the 2019 Parts Europe FatBookPART # DESCRIPTION0635‑1613 For 15-19 Softails w/ mechanical clutch

BLINDSIGHT LS BAR END MIRRORS• Convex mirrors with

automotive-quality glass• 6061-T6 aluminum CNC-

machined billet construction• Rubber mounted to reduce vibration• Will fit most handlebar/ clip-ons with

an outer diameter of 22 mm (7/8”) (requires 10 mm (3/8”) of bare bar outboard of the grip/ throttle assembly)

• Blindsight mirror intended to be used in conjunction with left-side mirror or stock mirrors to help reveal blind spots

• LS (lane splitter) version is retractable/ folding

• Sold each

PART # DESCRIPTION0640‑1336 Black, left side0640‑1337 Chrome, left side

0640-1336

0640-1337

0610-2136

0610-2137

0610-2139

8 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2019

LOS ANGELES CHOPPERSSpecializing in innovative parts that give every bike a unique style, Los Angeles Choppers has been a long-standing leader in the custom bike industry. Our custom handlebar designs will really set your machine apart in the crowd. Mild to wild, there is sure to be a design, height and finish that will complement the style of your bike and give you a custom fit and feel when in the saddle.

T-BAR GAUGE MOUNTS• Available for 25,4 mm (1”), 32 mm (11/4”)

or 38 mm (11/2”) diameter T-bars• Billet aluminum construction in chrome,

gloss black and flat black finishes• Perfect for your Kage Fighter-T’s

FOR 18-19 FXBB/ FXBR MODELSPART # DESCRIPTIONCHROME2210‑0528 For 25,4 mm (1”) dia. T-Bars2210‑0531 For 32 mm (11/4”) dia. T-Bars2210‑0534 For 38 mm (11/2”) dia. T-Bars

PART # DESCRIPTIONGLOSS BLACK2210‑0529 For 25,4 mm (1”) dia. T-Bars2210‑0532 For 32 mm (11/4”) dia. T-Bars2210‑0535 For 38 mm (11/2”) dia. T-Bars

PART # DESCRIPTIONFLAT BLACK2210‑0530 For 25,4 mm (1”) dia. T-Bars2210‑0533 For 32 mm (11/4”) dia. T-Bars2210‑0536 For 38 mm (11/2”) dia. T-Bars

32 MM (11/4”) PREMIUM SERIES APES• Revolutionary Premium Series FATBARS are lighter and stronger,

with less vibration and improved moment of inertia• Beautiful mandrel bends that are fully round, not

the usual flattened non-mandrel bends• Stronger DOM center tube• Aluminum end tubes help lower vibrations• The moment of inertia is greatly improved because of the unique lightweight

aluminum end tubes, allowing for easier and quicker steering• Bars are opened up and have an ergonomic wrist angle

that lets you ride longer and more comfortably

• CNC and hand-blended wiring holes and paths designed to smoothly run internal wires

• Accept stock handlebar clamps, risers and controls• Available in 33 cm (13”) and 40,5 cm (16”) heights• 25,4 mm (1”) clamping area with 89 mm (31/2”) on-center knurling• Chrome-plated or gloss black powder-coat finishes available• For cable-type throttle only

CHROME PART # GLOSS BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK0601‑4743 0601‑4742 40,5 cm (16”) 93 cm (361/2”) 30 cm (113/4”) 21,5 cm (81/2”)0601‑4744 0601‑4745 33 cm (13”) 93 cm (361/2”) 30 cm (113/4”) 21,5 cm (81/2”)

0601-4743

0601-4745

2210-0528 2210-0532 2210-0536

9 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2019

SCREW-IN LOCKING GAS CAPS• Locking cap discourages fuel theft and tampering• Lock has a swing-away cover to keep dirt and

debris out of the locking mechanism• Come with two keys• Sold each

PART # DESCRIPTIONFOR L96-19 BIG TWIN AND L96-99 XL0703‑0815 Gloss black w/ vent0703‑08161 Gloss black w/o vent1 Not for 18-19 Softtails

0703-0816

SCREW-IN GAS CAPS• Feature a provision for evaporative emissions control equipment• Sold individually

PART # DESCRIPTIONFOR L96-19 BIG TWIN AND L96-19 XL0703‑0817 Gloss black w/ vent0703‑08181 Gloss black w/o vent1 Not for 18-19 Softails.

0703-0817

0703-0818

FRONT FENDER• Smooth steel construction• Pre-drilled, mounts with existing hardware• Designed for use with 16”-17” front wheelPART # DESCRIPTION1401‑0633 For 08-11 FLSTSB; repl. OEM # 59495-08BEO

0703-0815

10 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2019

MINI SERRATED PASSENGER FLOORBOARDS• CNC-machined from 6061 billet aluminum• Strong yet lightweight two-piece construction• Serrated for exceptional grip• 360° rotational adjustment• Pitch adjustment screw for a level riding position• Dimensions: 5” long, 3” wide• Sold in pairsSee the 2019 Parts Europe FatBook for an explanation of footpeg mount styles

PART # DESCRIPTIONFOR 18-19 SOFTAILS1621‑0919 Raw1621‑0920 Black anodized

1621-0919

1621-0920

MINI SERRATED DRIVER FLOORBOARDS• CNC-machined from 6061 billet aluminum• Strong, yet lightweight two-piece construction• Serrated for exceptional grip• 360° rotational adjustment• Pitch adjustment screw for a level riding position• Dimensions: 5” long, 3” wide• Sold in pairsSee the 2019 Parts Europe FatBook for an explanation of footpeg mount styles

PART # DESCRIPTIONFOR M-EIGHT SOFTAIL W/ DRIVER FOOTPEGS1621‑0917 Raw aluminum1621‑0918 Black anodized

1621-0917

1621-0918

JOKER MACHINEHigh-quality precision-machined parts for your American V-Twin. Joker Machine has a background making parts for the aerospace industry. They put that high level of engineering skill and true powersports passion into creating beautiful pieces of functional art for your motorcycle.

11 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2019

SPORTFLEX™ ARM SLEEVES• 50+ UV Protection• Protects arms from sun in the summer• Helps keep arms warm in the winter• Machine washable• Made from stretchable polyester and elastane materials• Sold in pairs

DESCRIPTION PART #Black 3070‑1124

SPORTFLEX™ BEANIES• New innovative material fabrication• Great mid-weight protection from the elements• SportFlex™ fabric offers 50+ UV protection• Provides comfort and warmth• Fabric is brushed for ultimate softness• Four-way stretch for customizable fit

DESCRIPTION PART #All over skull 2501‑3184

DESCRIPTION PART #Pinstripe flame 2501‑3185

CRUISER 3 GOGGLES WITH INTERCHANGABLE LENSES• Five sets of lenses: anti-fog smoked, amber, clear,

yellow and smoked with Blue Revo• Include shatter-resistant polycarbonate lenses• Lenses provide 100% UV protection• Frame size: large• Rubber frame• Open cell foamFRAME COLOR PART #Matte black 2610‑1179

DIESEL GOGGLESWITH INTERCHANGEABLE LENSES• Four sets of lenses: anti-fog smoked, clear, yellow, and smoked with Blue Revo• Include shatter-resistant polycarbonate lenses• Lenses provide 100% UV protection• Thermoplastic elastomer frame• Open cell foam with fleeceFRAME COLOR PART #Gloss black 2610‑1181

2501-3184 2501-3185

12 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2019

BOOST SUNGLASSES• HD/ Revo lenses• Include shatter-resistant

polycarbonate lenses• Lenses provide 100% UV protection• TR90 frame

ROUTE SUNGLASSES• High Definition/ Revo lenses• Include shatter-resistant polycarbonate lenses• Lenses provide 100% UV protection• Polycarbonate frame• Accept prescription lenses (not included)

FRAME/ LENS COLOR PART #Matte black/ purple HD w/ silver mirror exterior and anti-reflash blue Revo interior 2610‑1177Gloss white/ purple HD w/ silver mirror exterior and anti-reflash blue Revo interior 2610‑1178

FRAME/ LENS COLOR PART #Matte black/ purple HD and light blue Revo interior 2610‑1183

FAT BOY SUNGLASSES• Our popular Fat Boy frame style, now with smoke cyan mirror HD/ Revo lenses• Anti-fog, anti-scratch polycarbonate lenses provide 100% UVA/ UVB protection• Closed-cell memory foam seals out wind and debris, and molds to face• Microfiber carrying pouch doubles as a cleaning cloth• Accept prescription lenses (not included)

FRAME/ LENS COLOR PART #Matte black/ purple-yellow 2610‑1186

FRAME/ LENS COLOR PART #Matte black/ purple-red 2610‑1187

2610-1186

2610-1178

2610-1177

2610-1187

13 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

MAY 2019

ANCHOR SUNGLASSES• Polarized lenses• Include shatter-resistant polycarbonate lenses• Lenses provide 100% UV protection• Polycarbonate frame• Removable foam

MISSION SUNGLASSES• Anti-fog lenses• Include shatter-resistant polycarbonate lenses• Lenses provide 100% UV protection• TR90 frame• Closed cell removeable foam• Ballistics impact approved• ANSI Z87.1-2010+ approved• Accept prescription lenses (not included)

TREAD SUNGLASSES• Anti-fog lenses• Impact resistant polycarbonate lenses• Lenses provide 100% UV protection• Polycarbonate frame• Closed cell foam• ANSI Z87.1-2010+ approved• Accept prescription lenses (not included)

VAST SUNGLASSES• Anti-fog lenses• Includes shatter-resistant polycarbonate lenses• Lenses provide 100% UV protection• Polycarbonate frame• Temple strap• Ballistics impact approved• ANSI Z87.1-2010+ approved• Accept prescription lenses (not included)

FRAME/ LENS COLOR PART #Matte black/ smoke 2610‑1175

FRAME/ LENS COLOR PART #Matte tortoise/ brown 2610‑1176

FRAME/ LENS COLOR PART #Matte gray/ clear 2610‑1182

FRAME/ LENS COLOR PART #Matte black/ clear 2610‑1184

FRAME/ LENS COLOR PART #Matte black/ clear 2610‑1185

2610-1176

2610-1175