The Dominant Force in Material Handling - EquipNet · Standard TOC, Inches (mm) 12 (360) Minimum...
Transcript of The Dominant Force in Material Handling - EquipNet · Standard TOC, Inches (mm) 12 (360) Minimum...
The Dominant Force in Material Handling
TM
Busse/SJI Corporation – 920.326.3131 • Fax: 920.326.3134 2
™
LEADERS IN MATERIAL
HANDLING
For a combined period of over
120 years, the Companies of
Arrowhead Systems, Inc. have utilized
their expertise to provide:
• Solutions • Systems • Turnkeys
• Line Layouts • Integration
• Controls • Installation
3
Product Offering:• Air Conveyors
• Container Conveyor Systems
• Coolers
• Depalletizers (Low Level / High Level)
• Dunnage, Sorting and Stacking
• Accumulation Systems
• Gripper Elevators / Lowerators
• Gripper Rinsers
• Pallet Conveyor Systems
• Pallet Stackers / Dispensers
• Palletizers (Low Level / High Level)
• Singlefilers
• Sorting Systems
• Warmers
Engineering:• Line Design
• Customized Solutions
• Integration
• Project Management
Customer Service:• Installation, Start-Up
and Training
• Equipment Relocation
• 24-Hour Parts and Service Support (800.882.4995)
• Machine Audits
www.arrowheadsystems.com
Notes
Busse/SJI Corporation – 920.326.3131 • Fax: 920.326.3134 4
Companies of Arrowhead Systems, Inc.
■ Depalletizers (Low & High Level)■ Palletizers (Low & High Level)■ Pallet Handling Systems■ Pallet Stackers and Dispensers■ Sheet Handling Inspection Systems■ Spray Warmers■ Spray Coolers■ Twist Rinsers
Busse/SJI Corporation124 N. Columbus Street | Randolph, WI 53956
Ph: 920.326.3131 | Fax: 920.326.3134
5
Product Offering:• Air Conveyors
• Container Conveyor Systems
• Coolers
• Depalletizers (Low Level / High Level)
• Dunnage, Sorting and Stacking
• Accumulation Systems
• Gripper Elevators / Lowerators
• Gripper Rinsers
• Pallet Conveyor Systems
• Pallet Stackers / Dispensers
• Palletizers (Low Level / High Level)
• Singlefilers
• Sorting Systems
• Warmers
Engineering:• Line Design
• Customized Solutions
• Integration
• Project Management
Customer Service:• Installation, Start-Up
and Training
• Equipment Relocation
• 24-Hour Parts and Service Support (800.882.4995)
• Machine Audits
www.arrowheadsystems.com
Companies of Arrowhead Systems, Inc.
Arrowhead Conveyor Corporation, Inc.3255 Medalist Drive | P. O. Box 2408 | Oshkosh, WI 54903
Ph: 920.235.5562 | Fax: 920.235.3638
■ Table Top Conveyors ■ Mat Top Conveyors■ Rinsers (Water & Ionized Air)■ Vacuum, Belt, Chain & Air Conveyor Systems■ Gripper Elevators & Lowerators■ Accumulation Systems■ Combiners (Mechanical)■ Singlefilers (Pressureless)■ Rollerless Case Conveyors■ System Design and Layout■ Integration / Installation ■ Systems Controls
Busse/SJI Corporation – 920.326.3131 • Fax: 920.326.3134 6
Page
■ Depalletizers
■ Turbo Series™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
■ Classic “W” Series™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
■ Advantage Series™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
■ Palletizers
■ Viper Series™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
■ Classic “R” Series™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
■ Eclipse Series™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
■ SJI Warmers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
■ SJI Coolers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
■ Other
■ Bulk Container Receiving and Loading System. . . . . . . . . . . 24
■ Hawk Series™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
■ Busse/SJI Field Service Offerings . . . . . . . . . . . . . . . . . . . . . . 28
■ Resources and Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
■ After Sale Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Table of Contents
www.arrowheadsystems.com 7
Systems Integration
Busse/SJI Corporation – 920.326.3131 • Fax: 920.326.3134 8
TURBO SERIES™
Bulk Depalletizer
FEATURES MODELST3003 T3004 T4003 T4004 T5003 T5004
Semi-Automatic Sweep Functions • • • • • •Automatic Sweep Function S S S S S SManual Sheet Removal • • • • • •Automatic Single-Stage Sheet Removal S • S • S •Automatic Dual-Stage Sheet Removal O S O S O SManual Top Frame Removal • • • • • •Automatic Single-Stage Top Frame Removal S • S • S •Automatic Dual-Stage Top Frame Removal O S O S O SSemi-Automatic Pallet Change Cycle • • • • • •Automatic Pallet Change Cycle S S S S S SBottom Pallet Ejection S S S S S SBottom Pallet Ejection – High Speed • • O O O OMonochrome Touch Screen Operator Interface S S S S S SColor Touch Screen Operator Interface O O O O O OControl Voltage – 24 VDC S S S S S SControl Voltage – 110 VAC O O O O O OAdditional Dunnage Capacity and Collation • O • O • OPallet Conveying O O O O O OContainer Single Filing O O O O O OContainer Conveying O O O O O O
CONTAINERS MODELST3003 T3004 T4003 T4004 T5003 T5004
Glass Round S S • • • •Glass Non-Round O O • • • •Metal Round • • S S • •Metal Non-Round • • O O • •Plastic Round • • • • S SPlastic Non-Round • • • • O OComposite Round • • • • S SComposite Non-Round • • • • O O
S =StandardO=Optional • =Not Available / Applicable
Product Offering:• Air Conveyors
• Container Conveyor Systems
• Coolers
• Depalletizers (Low Level / High Level)
• Dunnage, Sorting and Stacking
• Accumulation Systems
• Gripper Elevators / Lowerators
• Gripper Rinsers
• Pallet Conveyor Systems
• Pallet Stackers / Dispensers
• Palletizers (Low Level / High Level)
• Singlefilers
• Sorting Systems
• Warmers
Engineering:• Line Design
• Customized Solutions
• Integration
• Project Management
Customer Service:• Installation, Start-Up
and Training
• Equipment Relocation
• 24-Hour Parts and Service Support (800.882.4995)
• Machine Audits
9 www.arrowheadsystems.com
STANDARD PARAMETERS TURBO SERIESMachine Speed, Sweeps/Minute Up to 10Maximum Load Height, Inches (mm) 110 (2790)Maximum Load Weight, Pounds (Kg) Up to 4000 (1810)Standard Pallet Size, Inches (mm) 44 x 56 (1120 x 1420)OPTIONAL – Pallet Width Range, Inches (mm) 40-50 (1000-1143)OPTIONAL – Pallet Length Range, Inches (mm) 40-56 (1220-1420)Standard TOC, Inches (mm) 12 (360)Minimum Pallet Conveyor TOC, Inches (mm) 12 (305)Standard Tin Line (TL), Inches (mm) 156 (3952)Minimum Tin Line (TL), Inches (mm) 144 (3656)Electrical Power 460V/3 phase/60 HzControl Voltage 24 VDCCompressed Air Volume, CFM (Liters/min) 15 (7)Compressed Air Pressure, PSI (KPa) 80 (550)Compressed Air Inlet 1/2” NPT
PLATFORM
TIN LINE
C LC L
INFE
EDFU
LL P
ALL
ET
DISCHARGEDUNNAGE
TOC
HOIST
DISCHARGEEMPTY PALLET
OPTIONAL OPERATOR PLATFORM
HOIST
MACHINEC LC L
C LC L
Busse/SJI Corporation – 920.326.3131 • Fax: 920.326.3134 10
CLASSIC “W” SERIES™
Bulk Depalletizer
FEATURES MODELSW3001 W3002 W4001 W4002 W5001 W5002
Semi-Automatic Sweep Functions S O S O S OAutomatic Sweep Function • S • S • SManual Sheet Removal S • S • S •Automatic Single-Stage Sheet Removal O S O S O SAutomatic Dual-Stage Sheet Removal • • • • • •Manual Top Frame Removal S • S • S •Automatic Single-Stage Top Frame Removal O S O S O SAutomatic Dual-Stage Top Frame Removal • • • • • •Semi-Automatic Pallet Change Cycle S • S • S •Automatic Pallet Change Cycle • S • S • SBottom Pallet Ejection S S S S S SBottom Pallet Ejection – High Speed • • • • • •Monochrome Touch Screen Operator Interface • S • S • SColor Touch Screen Operator Interface • O • O • OControl Voltage – 24 VDC S S S S S SControl Voltage – 110 VAC O O O O O OAdditional Dunnage Capacity and Collation • • • • • •Pallet Conveying O O O O O OContainer Single Filing O O O O O OContainer Conveying O O O O O O
CONTAINERS MODELSW3001 W3002 W4001 W4002 W5001 W5002
Glass Round S S • • • •Glass Non-Round O O • • • •Metal Round • • S S • •Metal Non-Round • • O O • •Plastic Round • • • • S SPlastic Non-Round • • • • O OComposite Round • • • • S SComposite Non-Round • • • • O O
S =StandardO=Optional • =Not Available / Applicable
Product Offering:• Air Conveyors
• Container Conveyor Systems
• Coolers
• Depalletizers (Low Level / High Level)
• Dunnage, Sorting and Stacking
• Accumulation Systems
• Gripper Elevators / Lowerators
• Gripper Rinsers
• Pallet Conveyor Systems
• Pallet Stackers / Dispensers
• Palletizers (Low Level / High Level)
• Singlefilers
• Sorting Systems
• Warmers
Engineering:• Line Design
• Customized Solutions
• Integration
• Project Management
Customer Service:• Installation, Start-Up
and Training
• Equipment Relocation
• 24-Hour Parts and Service Support (800.882.4995)
• Machine Audits
11 www.arrowheadsystems.com
STANDARD PARAMETERS CLASSIC “W” SERIESMachine Speed, Sweeps/Minute Up to 4Maximum Load Height, Inches (mm) 110 (2790)Maximum Load Weight, Pounds (Kg) Up to 4000 (1810)Standard Pallet Size, Inches (mm) 44 x 56 (1120 x 1420)OPTIONAL – Pallet Width Range, Inches (mm) 40-50 (1000-1143)OPTIONAL – Pallet Length Range, Inches (mm) 40-56 (1220-1420)Standard TOC, Inches (mm) 12 (306)Minimum Pallet Conveyor TOC, Inches (mm) 12 (305)Standard Tin Line (TL), Inches (mm) 156 (3952)Minimum Tin Line (TL), Inches (mm) 144 (3656)Electrical Power 460V/3 phase/60 HzControl Voltage 24 VDCCompressed Air Volume, CFM (Liters/min) 15 (7)Compressed Air Pressure, PSI (KPa) 80 (550)Compressed Air Inlet 3/4” NPT
Busse/SJI Corporation – 920.326.3131 • Fax: 920.326.3134 12
ADVANTAGE SERIES™
Bulk Depalletizer
FEATURES MODELSAS3003 AS3004 AS4003 AS4004 AS5003 AS5004
Semi-Automatic Sweep Functions • • • • • •Automatic Sweep Function S S S S S SManual Sheet Removal • • • • • •Automatic Single-Stage Sheet Removal S S S S S SAutomatic Dual-Stage Sheet Removal • O • O • OManual Top Frame Removal • • • • • •Automatic Single-Stage Top Frame Removal S • S • S •Automatic Dual-Stage Top Frame Removal • O • O • OSemi-Automatic Pallet Change Cycle • • • • • •Automatic Pallet Change Cycle S S S S S SBottom Pallet Ejection S S S S S SBottom Pallet Ejection – High Speed • • • • • •Monochrome Touch Screen Operator Interface S S S S S SColor Touch Screen Operator Interface O O O O O OControl Voltage – 24 VDC S S S S S SControl Voltage – 110 VAC • • • • • •Additional Dunnage Capacity and Collation • O • O • OPallet Conveying O O O O O OContainer Single Filing O O O O O OContainer Conveying O O O O O O
CONTAINERS MODELSAS3003 AS3004 AS4003 AS4004 AS5003 AS5004
Glass Round S S • • • •Glass Non-Round O O • • • •Metal Round • • S S • •Metal Non-Round • • O O • •Plastic Round • • • • S SPlastic Non-Round • • • • O OComposite Round • • • • S SComposite Non-Round • • • • O O
S =StandardO=Optional • =Not Available / Applicable
Product Offering:• Air Conveyors
• Container Conveyor Systems
• Coolers
• Depalletizers (Low Level / High Level)
• Dunnage, Sorting and Stacking
• Accumulation Systems
• Gripper Elevators / Lowerators
• Gripper Rinsers
• Pallet Conveyor Systems
• Pallet Stackers / Dispensers
• Palletizers (Low Level / High Level)
• Singlefilers
• Sorting Systems
• Warmers
Engineering:• Line Design
• Customized Solutions
• Integration
• Project Management
Customer Service:• Installation, Start-Up
and Training
• Equipment Relocation
• 24-Hour Parts and Service Support (800.882.4995)
• Machine Audits
13 www.arrowheadsystems.com
STANDARD PARAMETERS ADVANTAGE SERIESMachine Speed, Sweeps/Minute Up to 4Maximum Load Height, Inches (mm) 110 (2790)Maximum Load Weight, Pounds (Kg) Up to 4000 (1810)Standard Pallet Size, Inches (mm) 44 x 56 (1120 x 1420)OPTIONAL – Pallet Width Range, Inches (mm) 40-57 (1000-1450)OPTIONAL – Pallet Length Range, Inches (mm) 40-57 (1000-1450)Standard TOC, Inches (mm) 16 (450)Minimum Pallet Conveyor TOC, Inches (mm) 16 (455)Standard Tin Line (TL), Inches (mm) 40 (1015)Minimum Tin Line (TL), Inches (mm) 36 (915)Electrical Power 460V/3 phase/60 HzControl Voltage 24 VDCCompressed Air Volume, CFM (Liters/min) 15 (7)Compressed Air Pressure, PSI (KPa) 80 (550)Compressed Air Inlet 3/4” NPT
Busse/SJI Corporation – 920.326.3131 • Fax: 920.326.3134 14
VIPER SERIES™
Bulk Palletizer
FEATURES MODELSV3003 V3004 V4003 V4004 V5003 V5004
Semi-Automatic Sweep Functions • • • • • •Automatic Sweep Function S S S S S SManual Sheet Placement • • • • • •Automatic Single-Stage Sheet Placement S • • • S •Automatic Dual-Stage Sheet Placement • S S S • SManual Top Frame Placement • • • • • •Automatic Single-Stage Top Frame Placement S • • • S •Automatic Dual-Stage Top Frame Placement • S S S • SSelf Patterning • • • • • •Automatic Void-Free Patterning S S S S S SSemi-Automatic Pallet Change Cycle • • • • • •Automatic Pallet Change Cycle S S S S S SBottom Pallet Injection • • • • • •Bottom Pallet Injection – High Speed S S • • S STop Pallet Injection • • S S • •Touch Screen Monochrome Operator Interface S S S S S STouch Screen Color Operator Interface O O O O O OAdditional Dunnage Capacity • O O O • OPallet Conveying O O O O O OContainer Conveying O O O O O O
CONTAINERS MODELSV3003 V3004 V4003 V4004 V5003 V5004
Glass Round S S • • • •Glass Non-Round O O • • • •Metal Round • • S S • •Metal Non-Round • • O O • •Plastic Round • • • • S SPlastic Non-Round • • • • O OComposite Round • • • • S SComposite Non-Round • • • • O O
S =StandardO=Optional • =Not Available / Applicable
Product Offering:• Air Conveyors
• Container Conveyor Systems
• Coolers
• Depalletizers (Low Level / High Level)
• Dunnage, Sorting and Stacking
• Accumulation Systems
• Gripper Elevators / Lowerators
• Gripper Rinsers
• Pallet Conveyor Systems
• Pallet Stackers / Dispensers
• Palletizers (Low Level / High Level)
• Singlefilers
• Sorting Systems
• Warmers
Engineering:• Line Design
• Customized Solutions
• Integration
• Project Management
Customer Service:• Installation, Start-Up
and Training
• Equipment Relocation
• 24-Hour Parts and Service Support (800.882.4995)
• Machine Audits
15 www.arrowheadsystems.com
VIPER SERIES™
Bulk Palletizer
STANDARD PARAMETERS VIPER SERIESMachine Speed, Sweeps/Minute Up to 10Maximum Load Height, Inches (mm) 110 (2790)Maximum Load Weight, Pounds (Kg) Up to 4000 (1810)Standard Pallet Size, Inches (mm) 44 x 56 (1120 x 1420)OPTIONAL – Pallet Width Range, Inches (mm) 40-50 (1000-1143)OPTIONAL – Pallet Length Range, Inches (mm) 48-56 (1220-1420)Standard TOC, Inches (mm) 13 (330)Minimum Pallet Conveyor TOC, Inches (mm) 13 (330)Standard Tin Line (TL), Inches (mm) 165 (4190)Minimum Tin Line (TL), Inches (mm) 156 (3860)Electrical Power 460V/3 phase/60 HzControl Voltage 24 VDCCompressed Air Volume, CFM (Liters/min) 15 (7)Compressed Air Pressure, PSI (KPa) 80 (550)Compressed Air Inlet 3/4” NPT
Busse/SJI Corporation – 920.326.3131 • Fax: 920.326.3134 16
CLASSIC “R” SERIES™
Bulk Palletizer
FEATURES MODELSR3001 R3002 R4001 R4002 R5001 R5002
Semi-Automatic Sweep Functions S S S S S SAutomatic Sweep Function • O • O • OManual Sheet Placement S • S • S •Automatic Single-Stage Sheet Placement • S • S • SAutomatic Dual-Stage Sheet Placement • • • • • •Manual Top Frame Placement S • S • S •Automatic Single-Stage Top Frame Placement • S • S • SAutomatic Dual-Stage Top Frame Placement • • • • • •Self Patterning S S S S S SAutomatic Void-Free Patterning • • • • • •Semi-Automatic Pallet Change Cycle S • S • S •Automatic Pallet Change Cycle • S • S • SBottom Pallet Injection S S S S S SBottom Pallet Injection – High Speed • O • O • OTop Pallet Injection • • • • • •Touch Screen Monochrome Operator Interface • S • S • STouch Screen Color Operator Interface • O • O • OAdditional Dunnage Capacity • • • • • •Pallet Conveying O O O O O OContainer Conveying O O O O O O
CONTAINERS MODELSR3001 R3002 R4001 R4002 R5001 R5002
Glass Round S S • • • •Glass Non-Round • • • • • •Metal Round • • S S • •Metal Non-Round • • • • • •Plastic Round • • • • S SPlastic Non-Round • • • • • •Composite Round • • • • S SComposite Non-Round • • • • • •
S =StandardO=Optional • =Not Available / Applicable
Product Offering:• Air Conveyors
• Container Conveyor Systems
• Coolers
• Depalletizers (Low Level / High Level)
• Dunnage, Sorting and Stacking
• Accumulation Systems
• Gripper Elevators / Lowerators
• Gripper Rinsers
• Pallet Conveyor Systems
• Pallet Stackers / Dispensers
• Palletizers (Low Level / High Level)
• Singlefilers
• Sorting Systems
• Warmers
Engineering:• Line Design
• Customized Solutions
• Integration
• Project Management
Customer Service:• Installation, Start-Up
and Training
• Equipment Relocation
• 24-Hour Parts and Service Support (800.882.4995)
• Machine Audits
17 www.arrowheadsystems.com
STANDARD PARAMETERS CLASSIC “R” SERIESMachine Speed, Sweeps/Minute Up to 4Maximum Load Height, Inches (mm) 110 (2790)Maximum Load Weight, Pounds (Kg) Up to 4000 (1810)Standard Pallet Size, Inches (mm) 44 x 56 (1120 x 1420)OPTIONAL – Pallet Width Range, Inches (mm) 40-45 (1000-1143)OPTIONAL – Pallet Length Range, Inches (mm) 48-56 (1220-1420)Standard TOC, Inches (mm) 12Minimum Pallet Conveyor TOC, Inches (mm) 12Standard Tin Line (TL), Inches (mm) 165 (4190)Minimum Tin Line (TL), Inches (mm) 156 (3960)Electrical Power 460V/3 phase/60 HzControl Voltage 24 VDCCompressed Air Volume, CFM (Liters/min) 15 (7)Compressed Air Pressure, PSI (KPa) 80 (550)Compressed Air Inlet 3/4” NPT
Busse/SJI Corporation – 920.326.3131 • Fax: 920.326.3134 18
ECLIPSE SERIES™
Bulk Palletizer
STANDARD PARAMETERS ECLIPSE SERIES
Machine Speed, Layers/Minute Up to 4Pallet Change Cycle, Seconds - UD 35Maximum Load Height, Inches (mm) 110 (2790)Maximum Layer Weight, Pounds (Kg) Up to 75 (35)Standard Pallet Size, Inches (mm) 44 x 56 (1120 x 1420)OPTIONAL – Pallet Width Range, Inches (mm) 37-57 (940-1450)OPTIONAL – Pallet Length Range, Inches (mm) 37-57 (940-1450)Maximum Capacity Of Empty Pallets 14Maximum Capaicty of Separator Sheet Stack 220Maximum capacity of Top Frame Stack 14Standard TOC, Inches (mm) 18 (450)Minimum Pallet Conveyor TOC, Inches (mm) 13 (330)Standard Tin Line (TL), Inches (mm) 40 (1015)Minimum Tin Line (TL), Inches (mm) 36 (915)Electrical Power 460V/3 phase/60 HzControl Voltage 24 VDCCompressed Air Volume, CFM (Liters/min) 15 (7)Compressed Air Pressure, PSI (KPa) 80 (550)Compressed Air Inlet 3/4” NPT
Product Offering:• Air Conveyors
• Container Conveyor Systems
• Coolers
• Depalletizers (Low Level / High Level)
• Dunnage, Sorting and Stacking
• Accumulation Systems
• Gripper Elevators / Lowerators
• Gripper Rinsers
• Pallet Conveyor Systems
• Pallet Stackers / Dispensers
• Palletizers (Low Level / High Level)
• Singlefilers
• Sorting Systems
• Warmers
Engineering:• Line Design
• Customized Solutions
• Integration
• Project Management
Customer Service:• Installation, Start-Up
and Training
• Equipment Relocation
• 24-Hour Parts and Service Support (800.882.4995)
• Machine Audits
19 www.arrowheadsystems.com
ECLIPSE SERIES™
Bulk Palletizer
Busse/SJI Corporation – 920.326.3131 • Fax: 920.326.3134 20
The Busse/SJI Bottle and Can Warmer is designed to meet the most exacting cold
filled beverage processing requirements. Built from the finest materials with first class
workmanship, our complete line of Warmers can process any container.
Completely re-engineered for the 21st century, the Busse/SJI Bottle and Can Warmer will
exceed your highest expectations. From a foundation of proven machine design principles,
Busse/SJI has developed and incorporated many new innovative features into a truly superior
Warmer design.
SJI WARMERS
Multiple pumping & heating zones for precise process
control.
Product Offering:• Air Conveyors
• Container Conveyor Systems
• Coolers
• Depalletizers (Low Level / High Level)
• Dunnage, Sorting and Stacking
• Accumulation Systems
• Gripper Elevators / Lowerators
• Gripper Rinsers
• Pallet Conveyor Systems
• Pallet Stackers / Dispensers
• Palletizers (Low Level / High Level)
• Singlefilers
• Sorting Systems
• Warmers
Engineering:• Line Design
• Customized Solutions
• Integration
• Project Management
Customer Service:• Installation, Start-Up
and Training
• Equipment Relocation
• 24-Hour Parts and Service Support (800.882.4995)
• Machine Audits
21 www.arrowheadsystems.com
SJI WARMERS
Key Standard Features
• All stainless steel T304 construction.• Precise automated seam welding.• Stainless steel drive and idle shafts.• Babbitted center bearings for durability
and long life.• Heavy duty polypropylene transport
chain.• Stainless steel piping systems.• Sloped sump bottoms for easier
cleaning.• High volume, low pressure close
coupled stainless steel spray pumps.• Double screen drop boxes.• Isolation valves for quick change pump
maintenance.• Large orifice spray nozzles to eliminate
nozzle plugging.
• Wide angle full cone spray pattern for reduced nozzle count.
• Flow-Through transport bed for maximum heat transfer.
• Large access doors for easy cleanout.• Thermometers and Pressure gauges at
all pump headers.• Heavy duty shaft mounted main drive.• Inside belt returns for drip free plant
floors.• NEMA 4X control panel with micro PLC
and AC inverter for main warmer drive.• Air knife water blow off system.• Pre-wiring of warmer with rigid
galvanized conduit.
Available Options
• High or low pressure steam shell and tube water heating systems.
• Gas fired water heating systems.• Condensate return pumps.• Observation windows. • Marine lighting.• Forced air evacuation to control
overheat. • Rotary spray Clean-In-Place or Boil-Out
systems.• Advanced PLC controls with graphical
user interface.
• Custom designed and precision fit infeed and discharge conveyor systems.
• Dynamic transfers and small pitch transport chain for “no deadplate” transfers.
• Automatic water temperature control/dew point monitoring systems.
• Discharge line switch shutdown system.• Continuous internal CIP system.
Busse/SJI Corporation – 920.326.3131 • Fax: 920.326.3134 22
SJI COOLERS
Shaft mounted main drive for safety and durability.
The Busse/SJI Spray Cooler is designed to meet the most exacting hot-filled container
processing requirements. Busse/SJI cooler technology has been developed over years of
extensive research and successful installations. Mastering the science of product cooling,
Busse/SJI serves the ever-changing food and beverage industry with the most innovative
coolers to be a world leader in coolers and product handling systems. Meeting the exact
requirements of rigid or flexible container processing, we deliver reliable performance
together with responsible water conservation methods.
Product Offering:• Air Conveyors
• Container Conveyor Systems
• Coolers
• Depalletizers (Low Level / High Level)
• Dunnage, Sorting and Stacking
• Accumulation Systems
• Gripper Elevators / Lowerators
• Gripper Rinsers
• Pallet Conveyor Systems
• Pallet Stackers / Dispensers
• Palletizers (Low Level / High Level)
• Singlefilers
• Sorting Systems
• Warmers
Engineering:• Line Design
• Customized Solutions
• Integration
• Project Management
Customer Service:• Installation, Start-Up
and Training
• Equipment Relocation
• 24-Hour Parts and Service Support (800.882.4995)
• Machine Audits
23 www.arrowheadsystems.com
SJI COOLERS
Available Options• Internal evaporative cooling package
for maximum water savings.• Glass tempering zones with direct
steam injection water heating systems.• Hot water pasteurizing systems with
precision temperature control.• Closed loop external evaporative
cooling tower heat exchanger systems.• Observation windows and marine
lighting.• Rotary spray Clean-In-Place or Boil-Out
systems.• Double screened drop boxes and
pressure strainers.
• Advanced PLC controls with graphical user interface.
• Custom designed and precision fit arrowhead infeed and discharge conveyor systems.
• Dynamic transfers and small pitch transport chain to eliminate deadplate transfers.
• Short stroke continuous motion push-arm for non-round container loading.
• Automatic water temperature control/dew point monitoring systems.
• Discharge line switch shutdown system.
Key Standard Features
• All stainless steel T304 construction.• Precise automated seam welding.• Stainless drive and idle steel shafts.• Babbitted center bearings for durability
and long life.• Heavy duty polypropylene transport chain.• Stainless steel piping systems.• Sloped sump bottoms for easier cleaning.• High volume, low pressure close
coupled spray pumps.• High flow basket suction strainers.• Isolation valves for quick change
pump maintenance.• Large orifice spray nozzles to eliminate
nozzle plugging.
• Wide angle full cone spray pattern for reduced nozzle count.
• Flow-Through transport bed for maximum heat transfer.
• Large access doors for easy cleanout.• Thermometers and pressure gauges at
all pump headers.• Heavy duty shaft mounted main drive.• Inside belt returns for drip free plant
floors.• NEMA 4X control panel with micro PLC
and AC inverter for main cooler drive.• Air knife water blow off system.• Pre-wiring of cooler with rigid
galvanized conduit.
FRESHAIR
FRESHAIR
FRESHAIR
FRES
HA
IRIN
LET
#1
FRES
HA
IRIN
LET
#2
FRES
HA
IRIN
LET
#3
EXHAUSTBLOWER
#1
EXHAUSTBLOWER
#2
EXHAUSTOUTLET
#1
EXHAUSTOUTLET
#2
FL
OWF
LO
W
FL
OWFL
OW
FL
OW
REFILL &WATER INLET,
AUX. COOLING
CO
NTR
OL
PA
NEL
REFILLWATER INLET
INLETSTEAM
CO
OLER
DR
IVE
AIR KNIFEBLOWER
PANELCONTROL
WATER INLETRINSE SPRAYS
AUX. COOLING
WATER INLET&
MAINDRAIN
COOLING ZONE #1TEMPERATURECONTROLLER
TEMPER ZONETEMPERATURECONTROLLER
COOLING ZONE #2TEMPERATURECONTROLLER
FLOOR
FRESHAIR
FRESHAIR
FRESHAIR
FRES
HA
IRIN
LET
#1
FRES
HA
IRIN
LET
#2
FRES
HA
IRIN
LET
#3
EXHAUSTBLOWER
#1
EXHAUSTBLOWER
#2
EXHAUSTOUTLET
#1
EXHAUSTOUTLET
#2
FL
OWF
LO
W
FL
OWFL
OW
FL
OW
REFILL &WATER INLET,
AUX. COOLING
CO
NTR
OL
PA
NEL
REFILLWATER INLET
INLETSTEAM
CO
OLER
DR
IVE
AIR KNIFEBLOWER
PANELCONTROL
WATER INLETRINSE SPRAYS
AUX. COOLING
WATER INLET&
MAINDRAIN
COOLING ZONE #1TEMPERATURECONTROLLER
TEMPER ZONETEMPERATURECONTROLLER
COOLING ZONE #2TEMPERATURECONTROLLER
FLOOR
Busse/SJI Corporation – 920.326.3131 • Fax: 920.326.3134 24
BULK CONTAINER RECEIVING SYSTEM & LOADING SYSTEM
Busse/SJI, the leader in container handling technology for over 50 years, proudly presents the ‘Bulk Container Receiving System’.
Developed to automate the truck unloading process, the Bulk Container Receiving System eliminates fork truck requirements, thus reducing labor and human error.
Whether your business requires container handling solutions or pallet handling solutions,
Busse/SJI has the right offering for your application.
TO D
EPA
LTO
DEP
AL
DU
NN
AG
EFL
OW
DU
NN
AG
EFL
OW
FULL
PA
LLET
FLO
WFU
LL P
ALL
ETFL
OW
TRU
CK
LO
AD
ING
/UN
LOA
DIN
G D
OC
KS
Product Offering:• Air Conveyors
• Container Conveyor Systems
• Coolers
• Depalletizers (Low Level / High Level)
• Dunnage, Sorting and Stacking
• Accumulation Systems
• Gripper Elevators / Lowerators
• Gripper Rinsers
• Pallet Conveyor Systems
• Pallet Stackers / Dispensers
• Palletizers (Low Level / High Level)
• Singlefilers
• Sorting Systems
• Warmers
Engineering:• Line Design
• Customized Solutions
• Integration
• Project Management
Customer Service:• Installation, Start-Up
and Training
• Equipment Relocation
• 24-Hour Parts and Service Support (800.882.4995)
• Machine Audits
25 www.arrowheadsystems.com
BULK CONTAINER RECEIVING SYSTEM & LOADING SYSTEM
Bulk Container Receiving System Features & Benefits
• Dual Chain Driven Live Roller Skewed Roller Conveyors. - 2½” diameter rollers - Rollers skewed in the middle portion
of the conveyor for separation or combining of loads
- Independent drives for each side- Side motor mounts with direct drive
hollow shaft gearboxes
• Bulk Loading/Unloading Tandem Air Chain Accumulation Conveyors.- 14” formed channel frames- 45” effective width- Center drive design allows for
reversible operation - Dual 60 drive chain riding on a UHMW
wear strip- Side motor mounts with flange
mounted hollow shaft gearboxes- Solenoid valve for each 5 ft.
accumulation zone- Independent staging zone for each
pallet
• Chain Driven Live Roller Conveyors.- 6” formed channel frames - 2½” diameter rollers - Side motor mounts with direct drive
hollow shaft gearboxes
• Transfer Car.- Dual CDLR Conveyors with
independent drives- 1½” x 6” floor rail system- 10” diameter steel drive wheels- 6” diameter steel idle wheels- Time of flight sensor for positioning- IGUS Cable Track for power
transmission
TOC
LOA
DIN
GD
ISC
HA
RG
E
REC
EIV
ING
LA
NE
LOA
DIN
GLA
NE
TOC
INFE
EDR
ECEI
VIN
G
TOC
LOA
DIN
GD
ISC
HA
RG
E
TOC
REC
EIV
ING
INFE
ED
CL
CL
CL
CL
Busse/SJI Corporation – 920.326.3131 • Fax: 920.326.3134 26
The “Hawk” is designed to handle a wide variety of layer sheet sortation and inspection needs. The “Hawk” Series Sheet Inspection System takes a stack of misaligned layer sheets and feeds them one at a time onto an alignment bed where they are inspected manually or with an optional automatic vision system. The individual sheets are then fed into a stacking bin where they are squared and stacked such that they can be loaded directly into a palletizer. The system is completely adaptable to accommodate our customer’s specific requirements.
HAWK SERIES™
Sheet Inspection System
Product Offering:• Air Conveyors
• Container Conveyor Systems
• Coolers
• Depalletizers (Low Level / High Level)
• Dunnage, Sorting and Stacking
• Accumulation Systems
• Gripper Elevators / Lowerators
• Gripper Rinsers
• Pallet Conveyor Systems
• Pallet Stackers / Dispensers
• Palletizers (Low Level / High Level)
• Singlefilers
• Sorting Systems
• Warmers
Engineering:• Line Design
• Customized Solutions
• Integration
• Project Management
Customer Service:• Installation, Start-Up
and Training
• Equipment Relocation
• 24-Hour Parts and Service Support (800.882.4995)
• Machine Audits
27 www.arrowheadsystems.com
Hawk Series Sheet Inspection System Features & Benefits
• Source Hoist – Receives a stack of unsorted sheets and indexes the stack up to a level just below the sheet pick up head.
• Automatic Top Frame Detection and Separation – vision system scans the top of the load for a top frame after each sheet is removed from the stack. If no top frame is present, the sheet feeder will continue to remove sheets. If a top frame is present, the automatic top frame remover will remove it and place it in the top frame hoist.
• Top Frame Hoist – receives top frames and aligns them as they are placed on the pallet to ensure an orderly stack.
• Dry Trash Removal System – spiral bound rotating brushes inside a vacuum chamber to dislodge and remove debris from the sheet.
• Vision Inspection System – can be configured to meet your specific requirements. The basic system is capable of detecting tears and major deformities. Our more complex system
incorporates programmable intelligence to omit specified sections of the sheets which contain lettering and/or other intentional markings while still using the edge tools to detect edge deformities.
• Target Sheet Hoists – system is configurable to allow a single target hoist for good sheets and a hopper for reject sheets to a more complex system with multiple target hoists where a sheet can be sent to a specific hoist based on decisions made during the inspection process.
• High Capacity Hoists – allowing up to 48” stack height at the infeed to the system and at each target hoist.
• Palletless Capabilities – Target hoist can be built with conventional pallet conveyors or as a palletless system for handling stacks of sheets without pallets.
• Empty Pallet Conveyor System a completely configurable system to transfer empty pallets from the source hoist to a pallet stacker/dispenser and then onto the various target hoists.
OPERATOR PLATFORM
MACHINE CL
LAYER SHEET ELEVATION
TOC
CL CONV.
DISCHARGEBAD LAYER SHEET
CL CONVEYOR
HOIST
SECONDARY TARGET HOIST
TARGET HOIST
VACUUM
VISION INSPECTION
INFEED/DISCHARGEEMPTY PALLET
CL CONVEYOR CL CONVEYOR
DISCHARGETOP FRAME
INFEEDLAYER SHEET
DISCHARGEGOOD LAYER SHEET
STEP
PLATFORMOPERATOR
TOP FRAME
SOURCE BIN
CONV. CL
CL CONVEYOR
CL CONVEYOR
CL CL
HAWK SERIES™
Sheet Inspection System
Busse/SJI Corporation – 920.326.3131 • Fax: 920.326.3134 28
Busse/SJI Field Service Offerings
On-Site Equipment Services:■ Initial Start-up / Commissioning
Ensure maximum performance from new equipment by having it professionally commissioned in your facility. Busse/SJI electrical control engineers can provide coordinated line integration with all of the related equipment from the depalletizer to the pallet conveyor in the warehouse.
■ Technical Support / Troubleshooting When a new container must be handled, or a problem arises, we can visit your facility to as-
sist. Electrical controls engineers are available for on-site line audits. We can provide recom-mendations for increased system efficiencies through the use of state of the art controls.
■ Rebuilds / Modifications Add new life to existing Busse/SJI machines by having factory trained personnel refurbish them on-site. Busse/SJI equipment can be modified on-site to provide enhanced performance as your line requirements grow.
■ Retrofits / Kit Installation As Busse/SJI designs keep pace with the latest technology, we offer on-site services to improve your existing machines. Some examples: changing from relay logic to PLC control, converting from hydraulic power to electric operation.
Spare Parts:■ Largest Parts Inventory Specific to Palletizers & Depalletizers As the oldest manufacturer of Palletizing and Depalletizing equipment, we stock the parts
needed to keep them running year after year.
■ Initial Spares Program We are proud to offer customized comprehensive spare parts lists with all new equipment.
These lists are compiled to ensure that the customer is protected from costly down-time due to unexpected component failure.
■ Providing Only O.E.M. Parts Busse/SJI will never substitute inferior quality parts. We provide only the original equipment parts your equipment was designed to use.
■ Emergency Shipments Busse/SJI provides emergency parts shipments seven days per week.
■ Specialized Parts Knowledge As the world’s oldest manufacturer of Palletizing and Depalletizing equipment, we are familiar with your equipment. We provide obsolete parts cross-reference services to ensure your Busse/SJI machine never stops running.
After Sale Service
Comprehensive Support:■ Manage All Warranties
Busse/SJI acts as a warranty clearing house for all the non-Busse/SJI components on our machines. Simply contact Busse/SJI when an in warranty component fails, and Busse/SJI will arrange for it to be replaced.
■ On-Going Audits of Machines and Systems Enjoy the peace of mind that knowing your Busse/SJI equipment is in top condition brings. Busse/SJI offers regularly scheduled audits to catch problems before they can cause costly down-time.
■ 24-Hour Hot Line Customers can call the Busse/SJI Hot Line (800-882-4995 In U.S. and Canada) or (920-326-6348 Internationally) 24 hour a day, 7 days a week. They will reach a manned answering service who will in turn page the on-call hot line responder. The hot line responders are carefully chosen to have a high likelihood of being able to answer questions and solve problems directly. This expedites the resolution of problems and limits the need for escalation. This is a FREE service.
29
Product Offering:• Air Conveyors
• Container Conveyor Systems
• Coolers
• Depalletizers (Low Level / High Level)
• Dunnage, Sorting and Stacking
• Accumulation Systems
• Gripper Elevators / Lowerators
• Gripper Rinsers
• Pallet Conveyor Systems
• Pallet Stackers / Dispensers
• Palletizers (Low Level / High Level)
• Singlefilers
• Sorting Systems
• Warmers
Engineering:• Line Design
• Customized Solutions
• Integration
• Project Management
Customer Service:• Installation, Start-Up
and Training
• Equipment Relocation
• 24-Hour Parts and Service Support (800.882.4995)
• Machine Audits
www.arrowheadsystems.com
Resources & Capabilities
Training:■ Dedicated Training Personnel Busse-SJI employs training professionals whose only job is training our
customers.
■ Customized Formal Classroom Training All Busse/SJI training packages are customized to a specific machine.
No two Depalletizer or Palletizer training classes are alike. This approach guarantees that all class time will be germane to your individual machine.
■ On-Site Training On Your Equipment In addition to customized classroom training, hands-on training on your
machine guarantees competency. Our instructor will cause a fault, or problem, to occur, and then allow each student to demonstrate ability to recover and re-start the machine.
■ Customized Training Materials Each training manual is specially prepared using the drawings, schematics,
and PLC program documentation from which your equipment was built.
■ Many Class Types Operator Supervisor Troubleshooting Maintenance Refresher Preventive Maintenance
Domestic Installation Services:■ Turn-Key Installation of Busse/SJI Equipment From the moment your new Busse/SJI equipment arrives at your loading
dock until it is smoothly operating at peak efficiency, Busse/SJI can be there. We offer packages that include mechanical installation, electrical installation, start-up, and training.
■ Relocation of Busse/SJI and Other Manufacturer’s Equipment Busse/SJI offers relocation services for their own and other manufactures’ equipment. If the move is across the plant or halfway across the country, Busse/SJI can make it happen.
Domestic & International Installation Services:■ Installation Supervision
Ensure that your installation crew operates at peak efficiency by having a Busse/SJI trained installer supervising the installation of your new, or used, equipment.
920.235.5562Fax: 920.235.3638
www.arrowheadconveyor.com
The Dominant Force in Material Handling
TM