The certification scheme for training institutions Presentert av Ellington Wilkins Lead auditor ASAS...
-
Upload
vernon-lester -
Category
Documents
-
view
216 -
download
1
Transcript of The certification scheme for training institutions Presentert av Ellington Wilkins Lead auditor ASAS...
The certification scheme for training institutions
Presentert av Ellington Wilkins
Lead auditor ASAS Sertifisering AS
ASAS SERTIFISERING ASASAS SERTIFISERING AS
Training institutions: 102Certified technical control: 54Both: 38Total: 194
Certification bodyCertification body
Third-party conformity assessment body operating certification schemes.
Impartiality
No commercial, financial or other pressures to compromise impartiality
Certification bodyCertification body
Confidentiality at all times
Commitment to the management of all information recieved or created during certification
Training requirementsTraining requirements All persons working with dangerous
equipment in Norway
Certified safety training is required for the following types of work equipment:
Gantry cranes and overhead travelling cranes (if use involves danger to life or health).
Tower cranes
Mobile cranes
Portal cranes
Training requirementsTraining requirements
Certified safety training is required for the following types of work equipment:
Cranes with a capacity greater than 2 tm when mounted on a truck or truck trailer
Lifting and stacking vehicles for goods with a permanent operator’s cabin on the vehicle
• Earth moving machines with an effect greater than 15 kW (20.4 hp).
CERTIFICATION SCHEMECERTIFICATION SCHEMEBased on specific requirements
Training institutions/Technical control entities
Regulation governing organisation and management, Workplace,
work activity, forskrift om administration criteria’s, Trainee guidelines & additional criteria’s
RegulationsRegulations
Regulation 1360 For Administrative requirements
Regulation 1356 For the workplace
Regulation 1357 Work operations
Regulation 1355 Organisation, management and participation
Example of the evaluation Example of the evaluation processprocess
Upon completion of this module, the trainee will be able to do the following:
1. Describe basic prestart activities for heavy equipment machinery.
2. Describe basic safety measures associated with operating heavy equipment.
3. Explain how to properly start, operate, and shut down the following types of heavy equipment:
Dozers, loaders, backhoes, excavators, compaction equipment, motor graders, scrapers, on road dump trucks, off-road dump trucks.
Certification processCertification process
– Application for certification– Accept of application / review– Document evaluation– Certification audit– Accept and correction of non - conformities– Verification– Certification documentation / certificate– Surveillence
Document evaluation Procedures for training in the use of earth moving
equipment
Routines for access to necessary equipment that are in good technical operation
Routines for access to qualified competent instructors
Routines for maintenance of competence
Documentation of the technical control of equipment by impartial third party
Document evaluation
Documentation of access to necessary and accepted literature
Documentation of acceptable course plan with allotted time
Routines/procedures for the examination of candidates (theoretical and practical)
Procedures for candidates with writing and or reading disabilities
Certification audit
Consists of confirmation/ verification of the before mentioned documentation
Verification of qualified instructors
Verification of the maintenance of competence of instructors
Verification of the participation of candidates
Verification of the use of theoretical literature/course materiel
Certification audit
Verification of the use of the required time
Verification of the theoretical examination of all candidates
Verification of access to and use of correct equipment for practical training
Verification of the practical examination of all candidates
Correction and accept of non-conformities
Based on the type of non-conformity (severe or non-severe)
A time frame for correcting the non-conformity will be agreed upon.
Review and accept of non-conformity.
Certification documentation
Four years
Requires annual surveillance by the certification body
Must adhere to the certification scheme and any directions from the certification body.
SertifiseringsrevisjonenSertifiseringsrevisjonen
Re-sertifisering
SERTIFIKAT – CERTIFICATE
Organisasjons nr.: Org. nr.
Sertifiseringsnummer ATS-
Har dokumentert og demonstrert kunnskap i kravene for produktsertifisering og kravene i Forskrift om bruk av arbeidsutstyr, best. nr. 555, §50
GYLDIGHETSOMRÅDE: Sertifisert for sikkerhetsopplæring av førere/operatører av
arbeidsutstyr som er nevnt i §49, best. nr. 555, herunder ;
- Løfte og stablevogner for gods
Sertifiseringen forutsetter regelmessig oppfølging frem til sertifikatets utløpsdato.
Virksomheten er selv ansvarlig for utført opplæring
1. gang sertifisert: Utstedelsesdato: Gyldig til:
_________________________________
___________________________________