w w w. a n r i t s u . c o m

Test & MeasurementSolutions

3w w w. a n r i t s u . c o m2 | Contents

Our product range spans the entire network life cycle, from research, development and conformance testing tomanufacturing, installation and network monitoring. This, combined with a reputation for building highly reliable,innovative instruments and the backing of a comprehensive global support and service network, firmly underlinesour commitment to provide our customers an unparalleled experience.

Test & Measurement Solutions

Page 7

Page 22

Page 27

Page 11

Page 24

Page 5

Page 8

Page 11

Page 10

Page 10

Page 18

Page 16

Page 28

Page 7

Page 12

Measurement highlight - Low costbackhaul testing to 80 GHzA low cost, high performanceapproach to backhaul link testing upto 80 GHz. Using 3 Anritsu units, onesetup will measure data throughput,latency and spectrum complianceunder varying conditions.

• MS2830A• CMA 3000• MT9090A

Get the most out of your networkwith Anritsu.

Measurement highlight - VectorStar, industry best VNAAnritsu’s industry-leading VNA technologydelivers performance where it really matters.The VectorStar 40 kHz to 125 GHzbroadband system provides industry-bestperformance in all three critical performanceareas.

• Span• Speed• Stability

Measurement highlight - PIM TestingPassive InterModulation (PIM) Testing is becoming more and moreimportant as demands on infrastructure grow with ever increasing datarates. Base Station performance is critical and only comprehensive PIMtesting can ensure maximum base station capacity. Anritsu’s uniquesolution includes high power testing and Distance-to-PIM technology totrack down issues fast and get base stations back on track as quickly aspossible.

4

Mobile Terminal Protocol

| Mobile Terminal Protocol Testing 5w w w. a n r i t s u . c o m

“When it comes to next generation mobiletest, we’re one step ahead.”

Anritsu offers a suite of multi-RAT (GERAN/UTRAN/LTE/LTE-Advanced/cdma2000®) signalling testing applicationsfor creating and executing tests on the industry standard MD8480C (GERAN/UTRAN), MD8470A (cdma2000®)and MD8430A (LTE/LTE-Advanced) signalling tester platforms. The ME7834 configurable platform provides acomplete solution. Together they provide terminal development organisations with the tools needed to supporttheir designs, from development, conformance, performance through to carrier acceptance.

ME7834 Mobile Device Test Platform

The ME7834 is a configurable system that provides protocoltest solutions for multi-RAT (GERAN/UTRAN/LTE/LTE-Advanced/cdma2000®) throughout the lifecycle ofmodern wireless terminals.

It can be configured to provide solutions for individualapplications or combinations that allow functionality to beshared or expanded as needs change.

• Flexible platform for multiple technologies andapplications.

• Broad test case coverage.

• High quality, advanced and dependable.

• Reliable and robust hardware renowned for high qualitysolutions.

From a simple bench-top Rapid Test Designer (RTD)development system, to a rack that provides comprehensivesimulation of real networks. ME7834 combines tools, and aframework along with world class signalling testers forefficient use of resources.

Additionally users that have purchased Anritsu’s establishedprotocol tools may integrate them into a ME7834 platformto protect their investment.

Development systems need to deliverfunctionality on time and tospecification. To make complex and

evolving protocols simple to manipulateand maintain and deliver on time TTCN

and RTD test interfaces can be built into ME7834. Thisprovides test developers the flexibility to use TTCN scripts orcreate tests based on a graphical flow chart interface for fastand flexible test creation and maintenance.

Conformance Test systems may beconfigured to test against specific workitems through to comprehensive

parallel test systems that are able to runtest campaigns efficiently and reliably.

The ME7834 can be configured for GCF / PTCRBconformance testing for all bands and automated to providethe fastest conformance test solution.

ME7834 is available for a number of configurationsapproved by Network Operators. Where required thesesystems can be combined for greater efficiency.

The ME7834 can be configured to providesolutions for individual applications orcombinations that allow functionality to be sharedor expanded as needs mature. ME7834 systemsare supplied fully configured and can be suppliedracked or as individual components.

Automation is simple to implement with tools thatprovide reliable test execution allowing tests tobe run overnight or unattended. Results arepresented to the user with an executive summaryof the various outcomes. Control of equipmentcan be provided from the tools.

Flexible Configurations

Adds fading

Adds cdma2000

Adds UTRAN/GERAN

MF6900AFading Simulator

MD8470ASignalling Tester

MD8480CW-CDMA Signalling Tester

Adds LTE/LTE-Advanced

MD8430ALTE Signalling Tester

7w w w. a n r i t s u . c o m6 | Mobile Terminal Protocol Testing

MD8475A Signalling Tester

• Flexible, easy-to-use platform supports UE test systems,such as InterRAT.

• Supports LTE FDD/TDD, W-CDMA/HSPA/HSPAevolution/DC-HSDPA, GSM/(E)GPRS, CDMA2000 1X/1xEV-DO and TD-SCDMA/TD-HSPA.

• Built-in IMS Service function provides service testenvironment, such as VoLTE and SMS over IMS.

The MD8475A is the ideal R&Dsolution for supporting variousstandards, such as triple-systemLTE/W-CDMA/GSM/GPRS or LTE/TD-SCDMA/GSM mobiles as well as

hybrid LTE/CDMA2000 mobiles.

Its SmartStudio state-machine based GUI supports a widerange of commercial terminal test environments for generalfunction tests, including multi-system smartphone callprocessing, service verification, performance, and mobilitytests, required increasingly by mobile R&D labs.

MF6900A Fading Simulator

• High reproducibility and maintenance freemeasurements using fully digital baseband processing.

• All-in-one support for LTE 2-cell 2x2 MIMO handovertests and 4x2 MIMO tests.

• Easy fading settings using a dedicated interface withMD8430A/MD8480C.

• Versatile and expandable hardware platform.

The MF6900A Fading Simulatorconnects via a dedicated digitalinterface to the MD8430A SignallingTester to configure a simple LTE basestation test system for simulating

3GPP LTE 4x2 MIMO fading.

The MF6900A uses fully digital baseband processing toassure fading processing with high reproducibility at thesame settings while greatly simplifying difficult MIMOpower control and achieving high accuracy. Completeelimination of analog circuits assures excellentmaintainability by removing the need for periodiccalibration.

MD8480C W-CDMA Signalling Tester

• Simulation of base stations (4 W-CDMA and 2 TDMAcells) for modern wireless terminal testing.

• R&D development of W-CDMA, HSPA,GSM/GPRS/EGPRS chipsets and terminals.

• Supports Rel 99 to Rel 9.

The MD8480C W-CDMA SignallingTester has been specifically designedfor developing and testing 3GPP UE.Supporting W-CDMA, HSPA, HSPAEvolution, GSM, GPRS and EGPRS

services in a single unit, it is the industry's first HSPAEvolution signalling tester. With full capability includingmaximum data throughput of 42 Mbps in the downlink withDC-HSDPA and 11 Mbps in the uplink as well as 64QAMand 2x2 MIMO. The MD8480C's air interface fully complieswith the 3GPP recommendations.

MX786201A Rapid Test Designer (RTD)

• Create tests more quickly than with any other product.

• Maintain tests more efficiently.

• Run tests more reliably.

For LTE-Advanced, including inter-RATwith GERAN/UTRAN/CDMA2000®, RTDprovides a choice of procedures librariesaddressing lower layers for flexibilitythrough to L3 libraries that make test

creation highly productive. These provide users with anoptimum solution employing a combination of fast, high-level fully-configured test procedures with close control overlower-layers for creating special conditions or stress tests.There are many proven LTE, UTRAN/GERAN tests whichmay be integrated with new procedures to produce Inter-RAT tests. Generally RTD delivers, via a combination of itseasy-to-use and logical test creation interface, extensiveprocedure libraries, and robust execution environment.

RTD

MX785201A Protocol Test System (PTS)

• Choose the most appropriate scripting language.

• Quickly debug tests by using the message sequencechart (MSC) view.

• Run tests on the system at their usual PC workstationdue to the compact system footprint.

PTS is the globally leading terminalsignalling testing application used inUTRAN (including HSPA) R&D test-labs. Itallows users to quickly diagnose deviceissues by editing and/or executing a

broad range of supplied tests, or using the flexible set ofTTCN-2 and C scripting APIs to create and execute customtests. A combination of its built-in test packages, easy-to-use protocol analysis tool and convenient system hardwarefootprint make PTS unique.

PTS

MX785220A Protocol Conformance Toolkit (PCT)

• Reduce external test house costs.

• Run tests faster than on any other test platform.

• Run tests more reliably than with any other test platform.

PCT is used for UTRAN and LTEprotocol conformance testing. Itallows customers to verify that theirdevices meet the 3GPP standard, andto gain GCF and / or PTCRB

certification. PCT can either be purchased for use with anexisting MD84xx-based platform, or simply within the newME7834 Mobile Device Test Platform. PCT has a uniquecombination of broad test case coverage, parallel test caseexecution, and a robust execution environment.

PCT

MD8430A LTE Signalling Tester

• Responsive support for latest 3GPP LTE standard.

• Early support for Carrier Aggregation, which is a keyfeature of 3GPP LTE-Advanced (FDD).

• One MD8430A support 2×2 MIMO Intra-RAT handoverand 4×2 MIMO with 300 Mbps (Carrier Aggregation) DLand 50 Mbps UL speeds.

• Maximizing MD8480C hardware investment with inter-RAT handover tests.

• Investment tailored to applications ranging from R&D toprotocol conformance tests.

• Easy L3 scenario R&D and full range of analysis tools.

The MD8430A Signalling Tester is anessential base station simulator, fortesting LTE chipsets and mobileterminals. It is the perfect test solutionfor bringing LTE terminals to market asquickly as possible, based on Anritsu’s

extensive knowledge of modern wireless technologies.

MX786201A-XXX Carrier Acceptance Test (CAT)

• Execute validated Carrier Acceptance Test based onCarrier specifications.

• Manage and automate the test sequence.

• Create new tests and modify tests based on the carriertest.

CAT provides a set of carrier specifiedacceptance tests. It allows users to verifytheir solutions against watermarkedacceptance tests that are specified andvalidated by the service provider. The CAT

system includes an integrated capability providing the userwith the superior capabilities of RTD to create, execute, andmanage test cases. CAT provides a robust set of test casesfor 3G and LTE service providers that can be used byvalidated test houses to perform certified testing. Thecombination of CAT and RTD provide the perfect tool forUE and chipset development.

CAT

8 | Mobile Terminal Performance Testing 9w w w. a n r i t s u . c o m

MG3710A Vector Signal Generator

• Frequency coverage up to 2.7 GHz/4 GHz/6 GHz.

• Built-in wideband 160 MHz baseband signal generator.

• ACLR: -71 dBc (W-CDMA, Test-Model 1, 64DPCH, ≤+5 dBm).

• Output level +23 dBm (CW, 400 MHz to 3 GHz).

• Switching time: ≤600 µs (List mode).

• SSB phase noise: <-131 dBc/Hz (typ.) (CW, 1 GHz, 20 kHz offset).

• Two RF outputs using Dual-RF.

• Combines, and outputs, two modulation signals fromone RF output using baseband addition function.

• Pre-installed standard waveform patterns LTE-FDD/TDD,W-CDMA/HSDPA, GSM/EDGE, CDMA2000 1X/1xEV-DO, Bluetooth®, Broadcast (ISDB-T/BS/CS/CATV),WLAN (11a/b/g), Mobile WiMAX, etc.

MS2690A/91A/92A Signal Analyzer

• Frequency coverage up to 6.0 GHz/13.5 GHz/26.5 GHz.

• Total level accuracy: ±0.3 dB (typ.)

• Dynamic range: 177 dBTOI: ≥+22 dBm, DANL: -155 dBm/Hz

Signal Analyzer

• Analysis bandwidth: 31.25 MHz (Std.)/62.5 MHz, 125 MHz (Opt.)

• Modulation analysis software (LTE, LTE-AdvancedWiMAX, GSM/GPRS/EDGE, W-CDMA/HSPA/HSPAEvolution, WLAN 11ac/a/b/g/n/p etc.)

• Capture function and Replay function.

Vector Signal Generator

• Level accuracy: ±0.5 dB (typ.)

• BER function, Internal AWGN Generator.

The MS2690A/MS2691A/MS2692A(MS269xA) Signal Analyzer has theexcellent general level accuracy,dynamic range and performance of ahigh-end spectrum analyzer. Not only

can it capture wideband signals but FFT technologysupports multifunction signal analyses in both the time andfrequency domains. Moreover, the built-in signal generatorfunction outputs both continuous wave (CW) andmodulated signals for use as a reference signal source.

ME7873F W-CDMA TRX/Performance Test SystemME7874F W-CDMA RRM Test System

• Conforms to 3GPP standards including TS 34.121-1 forRel-99, Rel-5, Rel-6, Rel-7, Rel-8, and HSPA/HSPAEvolution testing.

• Supports multi-band UTRA frequencies: including GCFBands I/VIII, and PTCRB Bands II/ IV/V.

• UMTS/LTE parallel measurement by adding LTE function.

• High-stability measurement by pre-measurementcalibration backed-up by comprehensive self-testfunctions for trouble-free peace of mind.

The ME7873F provides testingcapabilities that conform to the 3GPPTS 34.121 test specification, includingtransmitter, receiver, performance,RRM, HSPA and HSPA Evolutiontesting.

The ME7874F is focused on RRM testing. In addition, theME7873 and ME7874 can support parallel independent W-CDMA and LTE RF conformance test with upgrade fromME7873F or ME7874F. Simultaneous parallel measurementof W-CDMA and LTE terminals cuts test times and optimizesequipment cost-performance investment. TheME7873F/74F has enabled Anritsu to be the industryleading contributor for GCF and PTCRB RF test casevalidation approvals.

MT8820C Radio Communication Analyzer

• LTE FDD/TDD, W-CDMA/HSDPA/HSUPA/HSPAEvolution/DC-HSDPA, GSM/GPRS/EGPRS, TD-SCDMA/HSDPA/HSUPA, CDMA2000 1X/1xEV-DO andPHS/ADVANCED PHS transmitter and receiver tests in asingle unit.

• Manufacturing and inspection test times have beendramatically cut by incorporating advanced DSP andparallel measurement technologies.

• MT8820C has dual independent RF, AF, GPIB, andEthernet connectors (Parallelphone Measurement) thatcan be controlled separately, significantly reducingfacility costs and space requirements.

With a frequency range of 30 MHz to 2.7 GHz (MT8820C-018: 3.4 GHz to 3.8 GHz), the MT8820C performstransmitter and receiver tests on all the

major standards of mobile terminals for both R&D andmanufacturing.

MS2830A Signal Analyzer (MS2830A-040/041/043)

• Frequency coverage up to 3.6 GHz/6 GHz/13.5 GHz

• Total level accuracy: ±0.3 dB (typ.)

• Dynamic range: 168 dBTOI: ≥15 dBm, DANL: -153 dBm/Hz

• SSB phase noise*1: -109 dBc/Hz@1 kHz offset-118 dBc/Hz@10 kHz offset

Signal Analyzer

• Analysis bandwidth (Opt.): 10 MHz/31.25 MHz/62.5 MHz/125 MHz.

• Modulation analysis software (LTE, LTE-Advanced,WiMAX, GSM/GPRS/EDGE, W-CDMA/HSPA/HSPAEvolution, WLAN 11ac/a/b/g/n/p etc.)

• Capture function and Replay function.

Vector Signal Generator

• Level accuracy: ±0.5 dB (typ.)

• Internal AWGN Generator (Opt.028)

The MS2830A is a high-speed, high-performance, cost-effective SpectrumAnalyzer/Signal Analyzer. Not only can

it capture wideband signals but FFT technology supportsmultifunction signal analysis in both the time and frequencydomains. Moreover, the built-in signal generator functionoutputs both continuous wave (CW) and modulated signalsfor use as a reference signal source. *1: With Option 066

The MG3710A Vector SignalGenerator is a best-in-class, high-function, signal generator withexcellent RF and baseband

performance. Up to two RF output connectors can beinstalled each with two built-in waveform memories to outputtwo combined modulation signals from each RF connectorfor a maximum of four modulation signal outputs. It featuresa wide vector-modulation signal band and large waveformmemories while supporting digital modulation signals for awide range of communications modulation technologies.

ME7873L LTE RF Conformance Test System

• Conforms to 3GPP standards including TS 36.521-1/-3for LTE testing.

• Supports multi-band E-UTRA frequencies: including GCFBands 1, 3, 4, 5, 7, 8, 11, 12, 13, 14, 18, 19, 20, 21, 25, 38, 39,40, 41 and PTCRB Bands 2, 4, 5, 7, 12, 13, 14, 17, and 25.

• Auto-correction before measurement eliminates driftdue to temperature changes, greatly improvingmeasurement stability.

• Measurement functions for efficient R&D.

The ME7873L is for testing RF TRxcharacteristics, performance requirements,and RRM performance of FDD/TDD LTEmobile terminals in compliance with therequirements of 3GPP TS 36.521-1 and TS36.521-3. LTE -> GSM/UMTS/

CDMA2000/TD-SCDMA and UMTS /TD-SCDMA -> LTE,Inter-RAT tests. Moreover, UMTS 3GPP TS 34.121-1 Rel-7/8tests are supported.

This GCF/PTCRB-compatible test platform targets the mostand first Test Cases approved at quarterly GCF/PTCRBmeetings. The ME7873L has enabled Anritsu to be theindustry leading contributor for GCF and PTCRB RF/RRMtest case validation approvals.

MT8870A Universal Wireless Test Set

• For high volume production testing of cellular products.

• With 160 MHz measurement bandwidth up to 6 GHz.

• Up to four TRX modules in a mainframe for paralleltesting.

• On board dual core processor for shortest test times.

The MT8870A has been specificallydesigned to test all latest generationsof cellular technologies found insmartphones and tablet PCs. Up to

6 GHz frequency range with 160 MHz measurementbandwidth covers all wireless technologies. The MT8870A isthe most cost effective test solution for manufactures orproducts with multiple wireless technologies including LTE,W-CDMA/HSPA, TD-SCMA, CDMA2000 1X/1xEV-DO,GSM/EDGE.

• Signal generation with waveform generation software(IQproducer), LTE, LTE-Advanced, W-CDMA/HSPA,CDMA2000 1xEV-DO, TD-SCDMA, WLAN(11ac/a/b/g/n/j/p), Mobile WiMAX, Fading, Multi-carrier,DVB-T/H, TDMA etc.

10 | Mobile Infrastructure Performance Testing 11w w w. a n r i t s u . c o m

MT8860C WLAN Test Set

• Integrated test set for 802.11b/g/a/n transmitter andreceiver measurements.

• Universal solution for all WLAN chip sets.

• Shorter test system design time.

The MT8860C, one-box, WLAN TestSet is dedicated to testing devicesconforming to IEEE 802.11 standards,providing high-speed measurementsfor production testing and design

MT8852B Bluetooth® Test Set with EDR and Low Energy

• Supports measurements of Bluetooth Basic Rate and EDR.

• Option for new Bluetooth low energy measurements.

• Measurements performed as defined in Bluetooth RFTest specification.

• BlueSuite Pro3 software for graphical traces of FSKmodulation, PSK constellation diagrams, power ramp,individual channel measurements and receiver sensitivitysearch.

• CombiTest software for automated high volumeproduction line testing.

• Tests Bluetooth modules & products in under 5 seconds.

• AFH option for testing performance in presence ofinterfering sources such as WLAN.

The MT8852B Bluetooth BR/EDR testset provides radio layer measurementsin compliance to the Bluetooth 1.2, 2.0+ EDR 3.0 and 4.0 core specifications.

The test set uses Bluetooth test modes including RFloopback. Ideal for design proving and production test of allBluetooth products including; mobile phones, computersand peripherals, headsets, telephony products, audiogateways and AV products.

Support for audio measurements is also provided.MT8852B supports all three codec air interfaces (µlaw, A-lawand CVSD) on up to three SCO audio channels, offering themost comprehensive facilities on any Bluetooth test set.

“Anritsu's Bluetooth® Testers provide a fullrange of test capabilities for all R&D and high

volume production applications.”

Wireless AccessMT8221B/22B Handheld Base Station Analyzer -BTS MasterTM

• Increase system up-time with 1- and 2-port cable andantenna analysis.

• Lab-grade spectrum analysis in a handheld package.

• Demodulate and display W-CDMA/HSPA+, TD-LTE andFDD-LTE signals.

The MT822XB BTS Master is alightweight, handheld base stationanalyzer that provides wireless fieldtechnicians with a single test solutionfor installing, deploying, and

maintaining today's complex wireless networks.

Weighing less than 5 kg, the MT822XB BTS Mastercomprises a complete set of tools that includes a cable andantenna analyzer, spectrum analyzer and power meter asstandard. Optional signal analysis for LTE-FDD/TDD, W-CDMA/HSPA+, GSM/GPRS/EDGE, CDMA/EV-DO, TD-SCDMA/HSPA+ and WiMAX together with aninterference analyzer, channel scanner and a vector signalgenerator for receiver testing makes the MT822XB BTSMaster the most versatile, all-in-one unit eliminating theneed for technicians to carry several instruments in the field.

“Quickly and easily perform all themeasurements for wireless network

deployment, installation and maintenance.”

Site MasterTM Series Handheld Cable and AntennaAnalyzers

The latest S331L Site Master™completes sweeps quickly, performscalibrations almost instantly, andimplements fast trace naming under

even the most punishing field conditions. Field-orientedfeatures like Fast Sweep, 8 hours battery life and QuickName Matrix enhance productivity on site, increasing thenumber of sites that can be tested per day.

See page 28 for more details about Site Master.

proving. It is the only test set to offer both Network Mode(protocol based measurements) and Direct Mode (protocolfree measurements).

This single instrument solution is faster to integrate intoproduction, offering a universal solution for all WLAN chipsets with simple maintenance and calibration reducing testsystem cost and increasing production throughput.MT8860C is supplied with LANLook user interface forinstrument configuration and measurement display indesign proving applications and CombiTest software forhigh volume production test applications.

MT8870A Universal Wireless Test Set

• For high volume production testing of cellular and SRWmodules and products.

• For 802.11ac 10 MHz to 6 GHz frequency range with 160 MHz measurement bandwidth.

• Up to four TRX modules in a single mainframe for paralleltesting.

• On board dual core processor for shortest test times.

The new MT8870A from Anritsu hasbeen specifically designed to test all ofthe latest generation of SRW and cellulartechnologies found in smartphones and

tablet PCs. A single MT8870A mainframe can support upto four TRX modules so that parallel testing can beperformed. This maximizes production throughput andminimizes hardware idle time. Its 10 MHz to 6 GHzfrequency range with 160 MHz measurement bandwidthcover all current and planned wireless technologies. A singlesoftware licence for each mainframe is required for eachchosen technology, and additional TRX modules andwireless measurement software licences can be added asthe needs of your manufacturing process change.

MT8870A is the most cost effective test solution formanufactures or products with multiple wirelesstechnologies including 802.11, Bluetooth, FM and GPS.

PIM Master Passive Intermodulation Analyzer

• Small Size: 350 mm x 314 mm x 152 mm (13.8 in x 12.4in x 6.0 in).

• Frequency options for LTE, Cellular, E-GSM, DCS,PCS/AWS.

• Lightweight: 9.0 kg to 12.2 kg (20 lb. to 27 lb.)depending on frequency band.

• Battery Operated: 12 V Li-Ion battery.

• 25 dBm (0.3 Watt) to 46 dBm (40 Watt) output power.

Battery-operated, high power PassiveIntermodulation (PIM) testing solutionfor the major wireless standards in usearound the world. The PIM Master’ssmall size and light weight, combinedwith battery operation, make it the ideal

solution for verifying PIM performance at difficult toaccess sites such as Remote Radio Head (RRH)installations or indoor Distributed Antenna Systems(DAS).

The PIM Master includes Anritsu’s patented Distance-to-PIM (DTP) technology for accurately determiningthe location of PIM faults, both inside the feed systemas well as beyond the antenna. Distance-to-PIM allowstechnicians to quickly and efficiently locate PIMsources at a site resulting in quicker site repairs andlower costs.

12 | Service Assurance Solutions

Anritsu’s Service Assurance solutions build on many years of experience in network management, working with fixed and mobilenetwork operators around the world. Our award-winning network monitoring systems are optimised to assist and support manyvital technical and business functions. We offer solutions to provide full end-to-end monitoring of converged networks for GSM,GPRS, UMTS, IMS, LTE, SS7 and VoIP.

MasterClaw integrates performance monitoring, troubleshooting as well as service and customer experience monitoring. UsingMasterClaw benefits network operations, marketing, customer care, engineering and quality departments as well as providingnetwork and service KPIs to C-Level executives. The integrated Service Assurance environment enables network operators andservice providers to monitor their network as a unified service platform as opposed to treating each service and network segmentas a separate entity.

MasterClaw gives you a real-time, end-to-end view of your customers’ experience and pinpoints the causes of poor qualityservice. No need to worry about new network technologies, the rising diversity in handsets, or the migration to IMS and all-IP/LTEnext-generation networks: MasterClaw provides you with accurate decision support information and tools to run the networkefficiently across all technologies.

MasterClaw

The MasterClaw System offers powerful reporting capabilities across Network, Service, Customer and Partner domains with real-time dashboards and via KPI and KQI reports. MasterClaw allows for the definition of service level targets enabling both internaland external SLA enforcement.

The MasterClaw System’s troubleshooting applications guide a user through problem investigation, reducing the number of“clicks” from initial discovery of a problem to understanding the root cause.

Applications

MasterClaw includes a service management suite that offers a range of applications to give your entire organization unparalleledinsight of your network and services. There are applications that help you reduce operating costs, improve service quality andcustomer care, manage partners, track the success of marketing campaigns and reduce churn.

The MasterClaw solutions provide an instant view of your service operation and how your customers experience your services.It gives you access to workflows, analytical reports and SLA management to help you improve your service quality, allowing youto realize the potential in your converged and NGN/LTE networks and services.

Network Quality Monitoring

Prioritise investment and optimise capacity with detailed statistics on network traffic. Identify network bottlenecks, faulty networksegments and general load and resource utilization. With our Radio Access Network (RAN) applications you can increase yourservice quality and network performance by being able to do precise problem analysis by sector without drive tests.

Service Quality Monitoring

Generate dashboards and schedule regular reports showing service usage and quality for voice, SMS, and a wide range of dataservices. MasterClaw supports a long archive of KPIs for trend analysis and capacity planning. Our eoFinder Browse applicationenables you to browse by individual subscriber events collected over various network interfaces, making call destination, location,duration, drop/release cause etc. available for you. Handle customer complaints with eoFinder, as its long time storage periodmakes it an ideal tool for managing customer issues.

Customer QoS/SLA and Customer Experience Monitoring

MasterClaw supports dedicated real-time QoS and performance reports for your most importantaccounts. Our Customer Experience Management (CEM) application provides you with aholistic view of your customer base and the activities the customers carry out in their daily lives.Monitor the effect of advertising campaigns or price adjustments. Identify target groups andsubscribers likely to churn. Furthermore, our Customer Care Interface application enablesyour agents to ensure correct identification of user issues, ensure better troubleescalation, and enhance customer perceived support quality. Build productiverelationships with your customers by providing the answers they need.

Partner Performance Monitoring

Dedicated KPIs and KQIs allow for monitoring of interconnect partners andpartners providing content and services. Manage your roaming partnerswith the MasterClaw System’s GRQ reports. These are a set of standardKPIs, defined by the GSMA to minimise revenue loss due toinbound and out-bound roamers being denied service,receiving unreliable service or being affected by trafficsteering.

Higher availability of current services

Faster introduction of new services

Better management of roaming agreements

More profitable use of infrastructure

Happier customers – reduced churn

Improved Network Planning

Optimise marketing campaigns

Faster customer complaint resolution

13w w w. a n r i t s u . c o m

14 | Transport/Datacom Testing Solutions 15w w w. a n r i t s u . c o m

MP1800A/MT1810A Signal Quality Analyzer

• Highest quality waveforms including lowest intrinsic jitter.

• Jitter modulation up to 32 Gbit/s.

• Expandable slot configurations for serial and parallelapplications.

The MP1800A Signal Quality Analyzer(SQA) is a measuring instrument thatprovides bit error rate and qualityanalysis for serial digital signals directly

from 100 Mbit/s to 32 Gbit/s with configurations thatsupport 56 Gbit/s. The modular design of the MP1800Aseries offers customers a flexible cost-effective solution forperforming measurements at the ideal bit error rate.

The MP1800A SQA provides Pulse Pattern Generator (PPG)and Error Detectors (ED) in a single chassis. It allows formulti-channel support for parallel testing. Complicatedsearching for input thresholds or phase adjustments issimplified with the touch of a single key. It is ideal forresearch and development of 100 GE, optical modulators,high-speed interconnect, ICs, digital systems, PON, fiberchannel and InfiniBand.

MD1230B Data Quality Analyzer

• QoS performance test & VPN QoS Traffic Monitoring.

• Micro burst monitoring.

• Physical interface for 10 Mbit/s to 10 Gbit/s.

• Multiport capability up to 60 ports in one portablemainframe.

• Triple play dedicated analysis tools.

The MD1230B is a powerfulEthernet/IP network data analyzer withdual functionality of wire speedperformance analysis and network

monitoring integrated into the same instrument. IntuitiveWindows based GUI and card based architecture makes theMD1230B a versatile and an easy-to-use solution for allnetwork testing environments, ranging from R&D andmanufacturing to installation & maintenance.

MP1590B Network Performance Tester

• Error analysis measurements conforming to ITU-T Rec.G.821/G.826/G.828/G.829.

• Poisson error insertion capability enables correct FECfunction evaluation conforming to ITU-T 0.182.

• Full 10G-band Multichannel Measurement (STM-0/OC-1to STM64/OC-192; max 5376 VC11/VT1.5SPE, 4032 xVC12/VT2SPE).

• 11.1G Lan-Phy over OTN Interface (ITU-T G. Sup.43OTU1e and OTU2e).

Anritsu's MP1590B, the mostcomplete, converged performancetester provides analysis for PDH, SDH,SONET, OTN, Jitter and Ethernet in

support of component development, integration andsystem maintenance. This single unit tester enables fast faultfinding and improved efficiency for maintaining highstandards of QoS. More importantly the unit helps forwardplanning when more complex systems are developed,making sure the network always gets the green light.

Solutions for testing and measuring throughput and performance across the full range of digital communicationstandards and protocols - including high speed Ethernet, IP, OTN, ATM, SONET/SDH, EoS, jitter, FC, InfiniBand andbit error rate testing.

Model

MP1590BNetwork Performance Tester

MP1595A40G SDH/SONET Analyzer

MD1260A40/100G Ethernet Analyzer

MD1230BData Quality Analyzer

CMA5000aMulti-Layer Network Test Platform

CMA 3000All-in-one Field Tester

MT9090A/MU909060AGigabit Ethernet Tester

MP1800ASignal Quality Analyzer

MP2100ABERTWave

V-se

ries

Inte

rface

s

PD

H

STM

-1

STM

-4

STM

-16

STM

-64

STM

-256

OTU

1

OTU

2

OTU

3

OTU

4

Gig

E

10G

igE

40G

igE

100G

igE

Jitt

er

FC 2G F

C

4G F

C

8G F

C

16G

FC

32G

FC

Infin

iBan

d S

DR

Infin

iBan

d D

DR

Infin

iBan

d Q

DR

Infin

iBan

d F

DR

Infin

iBan

d E

DR

*1 *1

*2 *2 *2 *3*2

*1 - ITU-T G.709 Annex C *2 - with Option 090 *3 - Electrical Scope function

*2 *2 *2 *2 *2 *3

MD1260A 40/100G Ethernet Analyzer

• 40G/100G Ethernet and OTN transmission analysis.

• CFP and QSFP+ plug-in modules support.

• Ethernet jumbo frame up to 32700 bytes.

• Data capturing.

• GbE, 10GbE, 100GbE mapping to OTU4.

Weighting less than 8 kg, MD1260A isa portable 40GbE, 100GbE, OTU3and OTU4 analyzer with user-friendlytouch panel operation and rich analysisfunctions covering R&D,

manufacturing, installation, and maintenance for 40G/100Gnetworks.

The script commands can be automatically generated byrecording user operations to support creating MD1260A'sremote control programs.

MP2100A series BERTWave

• All-in-one BER measurements and eye-pattern analysis.

• High-speed remote measurement.

• Simultaneous 2-channel BER measurements.

• High-speed mask test.

• Precision extinction ratio measurement.

MP2100A performs simultaneous BERmeasurements and Eye-pattern analysisof active optical devices used by opticalcommunications systems to reduce

equipment costs by eliminating the earlier need for separatededicated instruments. And the BERT function supports awide range of bit rates from 125 Mbits to 12.5 Gbits (with Option090). Thus, it supports variousapplications including 100BASE-FX, 2G, 4G, 8GFC,10GbEm, etc. The MP2100A BERTWave is ideal for bothR&D and manufacturing tests because it increases efficiencyand reduces measurement costs by eliminating time-consuming setup.

MP1825B High Performance 4-Tap Emphasis Converter

• Pre-emphasis and Post-emphasis up to 4 taps.

• Two operating bit rates (14.05 Gbit/s and 28.1 Gbit/s).

• Jitter transparent.

• Automatic skew generation and control.

• Compact remote head controlled by MP1800A GUI.

The increasing access speedsrequired by Next GenerationNetworks force equipmentmanufacturers to increase signals

speeds in printed-circuit board (PCBs) and backplaneconnections. Travelling through PCB wiring causes signallevel attenuation and quality degradation, resulting in aclosed Eye diagram. Since it is impossible to avoid theseimpairments, many interconnect interfaces use pre-emphasis technology to maintain the Eye opening bycorrecting the level attenuation.

The MP1825B is a 4 tap pre-emphasis converter for bit ratesup to 28.1 Gbit/s. It allows easy changes to the pre-emphasis waveform amplitude, offset, amplitude of eachtap, for effective evaluation of the characteristics of high-speed interfaces below 10 Gbit/s, such as PCIe, USB, andBackplane Ethernet requiring pre-emphasis signals, as wellas InfiniBand 26G-IB-EDR, CEI-28G-VSR, in the 25/28 Gbit/sband.

16 | Transport/Datacoms Testing Solutions 17w w w. a n r i t s u . c o m

CMA 3000 All-in-One Field Tester

• Ethernet (10/100 Mbps, 1/10Gbps) SDH (STM-1/STM-4/STM-16/STM-64), PDH (E1/E3/E4), V-series interfaces.

• IP over Ethernet, Ethernet multistream, VoIP, Ethernetstacked VLAN, IP Channel statistics, Ethernet ServiceActivation test, (Y.1564), Synchronous Ethernet test,MPLS.

• ATM, frame relay, ISDN Call emulation, mobile (GSM,GPRS/EDGE, 3G).

• Ease of operation with touch screen-based operation.

• Battery operation, compact and lightweight, easy tocarry around.

Covering a wide range of applications,this versatile, all-in-one field tester forfixed and mobile access networkssupports out-of-service installation andcommissioning testing. With fast, first-

aid troubleshooting and in-depth, all-layer analysis oftransmission problems the CMA 3000 also supportssignalling analysis of telecom protocols. CMA 3000 deliverspowerful 2 Mbps test and analysis and with options willsupport a wide range of communication systems andtechnologies, providing field technicians an easy to use,portable, compact and flexible test instrument.

CMA5000a Universal Transport Analysis (UTA) Module

• Supports 10 GigE and OC-192/STM-64 applications inone single module.

• 10 GigE LAN-PHY & WAN-PHY.

• OC-192/STM-64 analysis down to DS0/E0.

• Field exchangeable optical interface via standard SFPand XFP.

The Universal Transport Analysis (UTA) module is a newgeneration of tester with the ability to support differenttransport standards. Today, it is available with 10 GigE andSONET/SDH application. With its small size, the UTAmodule fits in the CMA5000a platform and provides a veryportable solution for field engineer.

CMA5000a Gigabit Ethernet Application

• Targeted applications for 10/100/1000M Ethernetinstallation and maintenance.

• Dual optical and dual electrical ports.

• RFC 2544 Master/slave operation to ensure ease of use.

• Professional and comprehensive report generation.

The GigE Module can be used in an SBA or MBA. The GigEtest module enables 10/100/1000 Mbps testing of opticaland electrical Ethernet networks. With 2 optical (SFP) and 2electrical (RJ45) ports it is specifically designed to facilitateinstallation and maintenance of Ethernet networks. Forinstallation, the module provides RFC2544 test functionsincluding: Throughput, Latency and Frame Loss tests. Formaintenance and troubleshooting the module providescomplete, non-intrusive monitoring capabilities and presentscomprehensive statistics to give insight into the network'shealth and status.

CMA5000a Multi-Layer Network Testing Platform

• One platform does it all: - physical layer applications(OTDR, PMD, CD, OSA) - transport layer applications(10 M to 10 Gigabit Ethernet, SDH/SONET to 10 Gbps).

• Common Windows® based user interface simplifies use.

• Modular design allows unit to be customized.

• Simultaneous operation of multiple test applications.

The CMA5000a is a field portable, network testing platformdesigned for installation, maintenance and troubleshootingof today's complex networks. It features a common userinterface, open architecture design and numerous testtechnologies that allow the platform to evolve with usertesting needs and address ever-changingtelecommunication infrastructures.

Modules include:

• Gigabit Ethernet application (GigE)

• 10 Gigabit Ethernet application (10 GigE)

• SONET/SDH up to 10 Gig, OTU-1 and OTU-2, 10 GigEtesting (UTA)

• Optical Time Domain Reflectometer application (OTDR)

• Optical Spectrum Analysis application (OSA)

• Polarization Mode Dispersion application (PMD)

See the Optical section of this guide for details on theCMA5000a Optical modules.

MP1595A 40G SDH/SONET Analyzer

• 40G/43G SDH/OTN Analyzer.

• 1.5 Mbps to STM256/OC768 and OTU1, 2 and 3.

• DPSK modulation format for OTU3.

The MP1595A is an extension to themarket leading MP1590B range ofPDH, SDH and OTN testers. It isbased on the same well proven, easyto use operation software from the

MD1230B/MP1590B test family. The MP1595A is a sevenslot mainframe capable of testing up to OTU3 andincorporating the unique Poisson Error distribution FECstress tool from the MP1590B family. The MP1595Aprovides high speed testing of framed signals in aconvenient, portable test mainframe giving excellent valueand outstanding performance.

MT9090A/MU909060A Network Master GigabitEthernet Tester

• Comprehensive Ethernet testing for installation,maintenance and troubleshooting.

• Ping test and electrical cable diagnostics.

• Options for automated RFC 2544 and multistream testing.

• Test Automator simplifies operation and ensures proper set-up.

The Anritsu Network Master withGigabit Ethernet module is acomprehensive solution for testingGigabit Ethernet lines including LTE

mobile backhaul. The small, rugged, battery operated andeasy-to-use Gigabit Ethernet tester is specifically designedfor installation and maintenance of Ethernet accessnetworks. The instrument gives the user facilities for easybandwidth verification, connectivity testing and serviceavailability verification. Despite its small size the instrumentis equipped with a large colour display, where the graphicaluser interface and the test Automator makes it easy to testand troubleshoot Ethernet connections.

18

Optical

| Optical Testing Solutions 19w w w. a n r i t s u . c o m

Model

MT9083A2/B2/C2ACCESS Master

MT9090A/MU909011ADrop Cable Fault Locator

MT9090A/MU909014/15uOTDR

MT9090A/MU909020AOptical Channel Analyzer

MW90010A Coherent OTDR

CMA5000a*Multi-Layer Test Platform

CMA5Loss Test/Light Sources/Power Meters

MS9740AOptical Spectrum Analyzer

OTD

R S

tand

ard

OTD

R C

ons

truc

tio

n

OTD

R F

ault

loca

te

OTD

R S

ubm

arin

e

Loss

Tes

t Se

t

Spec

trum

Wav

elen

gth

Low

Lev

el

Med

/Hig

h Le

vel

Op

tica

l Ret

urn

Loss

Vis

ual F

ault

Lo

cato

r

Vid

eo In

spec

tio

n P

rob

e

Op

tica

l Sp

ectr

um A

naly

sis

Cha

nnel

Dro

p

Po

lari

sati

on

Mo

de

Dis

per

sio

n

Chr

om

atic

Dis

per

sio

n

Op

tica

l Co

mp

one

nt T

est

Op

tica

l Cha

nnel

Ana

lysi

sLightSource

OpticalPower

*See Transport/Datacoms page 17 for more details.

Anritsu offers a complete range of test equipment for the optical communications industry including R&D,production, installation, monitoring, and manufacturing. Anritsu is a recognized leader in high-speed opticaltechnology and field test solutions including evaluating a wide range of optical devices and fibre systems.

MT9090A/MU909011A Network Master Drop CableFault Locator

• Integrated launch fibre provides accurate initialconnector measurement without external devices.

• High resolution, widescreen colour display that is easy toread indoors or out.

• Fixed parameters simplify operation and ensure properset-up – just press “START”.

The MT9090A from Anritsu provides all of the features andperformance required for installation and maintenance ofshort fibres in a compact, modular test set. The MT9090Arepresents an unmatched level of value and ease of use,while not compromising performance. Data sampling of fivecentimeters and deadzones of less than one meter, ensureaccurate and complete fibre evaluation while a simpletesting sequence requires only one key press to initiate –allowing anyone to make error-free measurements.

The MT9090A represents a new era in drop cable andpremise testing. Its ease of use, low price, high-resolutionand size make this the perfect product for “last mile”testing.

MT9090 Network Master

With its four independent modules the MT9090 finallyaddresses the need of providing all the features andperformance required for installation andmaintenance of FTTx access networks. The verycompact battery-powered Network Master is acomprehensive solution for OTDR, 10 Mb/100 Mb &Gigabit Ethernet, Drop Cable Fault Locator andOptical Channel Analyzer.

Modules Available include :

MU909011A Drop Cable Fault Locator see p19MU909014x/15x µOTDR Module see p19MU909020A Optical Channel Analyzer see p20MU909060A Gigabit Ethernet Module see p16

MT9090A/MU909014/15 Network Master µOTDR

• High-end OTDR performance in a pocket-size pack-age with unique battery operation.

• Full AUTO mode simplifies operation, no OTDRknowledge needed.

• Complete PON testing through splitters up to 1 × 64.

• Built-in PON Power Meter, Loss Test Set and LightSource.

The new MU909014x/15x µOTDR Module series for theMT9090A Network Master platform provides all of thefeatures and performance required for installation andmaintenance of optical fibers in a compact, modular test set.The MT9090A represents an unmatched level of value andease of use, while not compromising performance. Datasampling of five centimeters, dead zones of less than onemeter and dynamic range up to 38 dB ensure accurate andcomplete fibre evaluation of any network type – premise toaccess, metro to core…including PON-based FTTxnetworks featuring up to a 1 × 64 split.

The MT9090A with MU909014x/15x module represents anew era in optical fibre testing!

MW90010A Coherent OTDR (C-OTDR)

• Measure submarine cables up to 12,000 km long with 10 m resolution.

• Unique solution for submarine links fault detection.

• Compact & lightweight for easy transportation.

The MW90010A is designed fordetecting faults in ultra-long opticalsubmarine cables of up to 12,000 km including multiplerepeaters (EDFAs). It is the ideal

solution for evaluating new cables at service deploymentas well as for troubleshooting in-service faults.

Ultra-long optical submarine cables use optical amplifiersto boost signals. The C-OTDR can measure thebackscatter light through all repeaters by using coherentdetection. As a result, it can display every fault condition,such as optical loss between repeaters, bending loss,distances, breaks, etc., on-screen for waveform dataanalysis.

MT9083A2/B2/C2 ACCESS Master™ OTDR

• Test ultra-long fibers spans (>200 km).

• Rapid testing of PON based networks up to 128 splits.

• Up to 150,000 data points for superior fibre detail.

• Longer battery operation time up to 12 hours.

• SCPI remote command support.

The MT9083C2 test sets aredesigned to make your measurementexperience simple and error-free withtrue one-button fault location,pass/fail classification, automated file

saving and naming and even a macrobend detectionfeature for identifying installation issues. They featuremultiple wavelengths and options to satisfy any networktesting requirement: access or metro, FTTx or LAN...allwithout straining your budget. For customers installingand maintaining metro area or core networks, theACCESS Master offers an automated fibre constructionapplication and multiple wavelengths.

20 | Optical Testing Solutions 21w w w. a n r i t s u . c o m

CMA5000a OTDR Module Series

• Never obsolete - expandable modular design.

• Dedicated testing modes simplify common tasks.

• Easy to use testing from fault location to advanced analysis.

The CMA5000a series OTDRmodules simplify installation,commissioning and trouble-shooting of core, metro, CWDMand PON based FTTx optical

networks. They feature a single mode, applicationsincluding 1310 nm, 1550 nm, and 1625 nm. Up tothree of these wavelengths can be combined into asingle optical port providing full spectrum fibrecharacterization at the press of a button anddedicated testing modes simplify operation for anyuser profile - novice to expert.

CMA5000a Polarization Mode Dispersion - PMD

• All band testing through a large choice of light sources.

• Comply to EIA/TIA FOTP-124 and IEC-61941.

• Fast measurement time: less than 8 seconds.

CMA5000a PMD brings highaccuracy, fast measurement time,and highest dynamic range for allfield PMD measurement during

installation and maintenance phase.

CMA5000a PMD can perform PMD histogrammeasurement which shows PMD value varietyinfluenced by environmental factors such as time,temperature and wind.

CMA5 Series Loss Test Sets & Power Meters &Light Sources

• Pocket-sized and rugged design.

• Multiple calibration wavelengths to address all networktypes: DataCom, multimedia, WDM as well as FTTx.

• Up to two wavelengths on a single port.

The CMA5 Series Loss Tester,Power Meter, and Light Sourcesare economical and easy-to-usehandheld meters and sourceswithout compromising on laser

stability or power accuracy. Featuring a ruggeddesign, the units withstand the difficult testingenvironment of fibre optic cable installation andmaintenance. A two-way powering system with 9 Vbattery and optional AC power adaptor ensure theCMA5 series adapts to any situation.

MT9090A/MU909020A Network Master OpticalChannel Analyzer

• Dedicated tool for installation, commissioning, andtroubleshooting of CWDM networks.

• Fast and accurate overview of all CWDM channels andchannel drifts over time.

• Fully compliant to the ITU-T G.695 and G.694.2standards.

The MU909020A/Optical ChannelAnalyzer module is a field modulardevice designed to measure andmonitor power and wavelength

over the 18 CWDM channels. It is a cost-effectivealternative to more complex OSA for the emergingCWDM market, providing fast and reliablemeasurements in every environment. Coming in asmall, light and rugged handheld format, this easy touse instrument is the ideal and essential companionof each field technician for installation, maintenanceand troubleshooting of CWDM access networks.

MS9740A Optical Spectrum Analyzer

• Measurement of optical devices in <0.2 s (5 nm) reducestotal analysis time.

• Dedicated apps for evaluating active optical devices.

• Excellent cost performance.

• Dynamic range performance ≤58 dB (0.4 nm from peakwavelength).

Covering 600 nm to 1750 nm, TheMS9740A can be used in a variety ofapplications, including measuring

optical devices, conducting WDM and EDFA signalanalysis, and evaluating optical level variations.

The MS9740A OSA reduces test times by 80% due toits unsurpassed sweep time. It also has minimumresolution of 30 pm and dynamic range of >58 dB.The combination of wide dynamic range and highresolution makes the MS9740A OSA an ideal solutionfor evaluating narrow band filters and conductingOSNR analysis of WDM signals.

CMA5000a - OSA (Optical Spectrum Analyzer)

• Wide spectral range (400 nm) 1250 nm to 1650 nm.

• High wavelength and power accuracy in all conditions.

• Easy-to-interpret user interface and on-line help.

• User-defined configurations for custom CWDM andDWDM testing.

The OSA4XX series combines theoptical performance of a benchtopOSA with ease of use of a fieldunit. These OSA modules for the

CMA5000a are the perfect tools for testing both largewavelength range CWDM systems and tightly spacedDWDM systems. Two different modules are availableto meet all test requirements: the OSA 425 and theOSA 400. Exclusive Channel Select option allows theuser to drop a wavelength for additional analysis forany modulation rate up to 40 Gbps (OSA 400).

Find more details about the CMA5000a and its modules onpages 17

CMA5000a OTDR/Chromatic Dispersion Application

• Accuracy in line with Metropolitan Networks requirement.

• CD measurement from one port.

• Tri-band 1310/1550/1625 nm OTDR.

Based upon the industry acceptedtime-of-flight measurementmethod (FOTP-168), the systemevaluates Chromatic Dispersion of

individual fibre links, utilising a single fibre for the testat multiple wavelengths, resulting in an increase in theaccuracy of measurement. Designed to provideoptimal test efficiency, the CMA5000a OTDR/CDfacilitates quicker turn-up of services and reduces thecost of testing. The combined unit has an auto-testfeature that determines the optimum settings. Inaddition, the intuitive setup menu guides the userthrough a few minor settings that minimize testingand setup times.

22 | RF and Microwave Testing Solutions 23w w w. a n r i t s u . c o m

MS2720T Series Handheld Spectrum Analyzer -Spectrum MasterTM

• Five options offering 9 kHz to 9, 13, 20, 32 & 43 GHz.

• Dynamic Range: > 106 dB in 1 Hz RBW @ 2.4 GHz.

• DANL: –160 dBm in 1 Hz RBW @ 1 GHz preamp On.

• Phase Noise: –104 dBc/Hz @ 10 kHz offset at 1 GHz.

• 1 Hz to 10 MHz Resolution Bandwidth (RBW).

• Tracking Generator up to 20 GHz.

The highest performance handheldspectrum analyzers available. Providingfield technicians and engineers withperformance that rivals a benchtop

spectrum analyzer. The MS2720T features a touchscreen,full-band tracking generators to 20 GHz, and best-in-classperformance for dynamic range, DANL, phase noise, andsweep speed, providing unprecedented levels of spectrummonitoring, hidden signal detection, RF/microwavemeasurements, and testing of microwave backhauls andcellular signals.

1 Hz to 20 MHz

• High speed modulation analysis S/W• Opt power meter measures to 32 GHz • Fast data transmission (GPIB 120 kb/sec)

• SPA, VSA and Vector SG in one box• Top class performance - Dynamic range 177 dB - Total level accuracy ±0.3 dB (typ.)• Max. 125 MHz analysis bandwidth• High speed modulation analysis• Supports LTE, LTE-Advanced, GSM/EDGE/ EDGE Evo, W-CDMA and WLAN etc.

-160 dBm @ 4 GHz-152 dBm @13 GHz-145 dBm @ 20 GHz-154 dBm @ 32 GHz-147 dBm @ 40 GHz

50 Hz to 6.0 GHz

50 Hz to 13.5 GHz

50 Hz to 26.5 GHz

-142 dBm in 100 Hz RBW-162 dBm (normalized to 1 Hz)-162 dBm (normalized to 1 Hz)

• Handheld, battery-operated design • Lightweight at only 3.5 kg• Dynamic range of >95 dB in 10 Hz RBW• DANL of -152 dBm in 10 Hz RBW• Phase noise of -100 dBc/Hz max @ 10 kHz offset at 1 GHz

Model RBW Noise level Key Features

Spectrum Analyzer1 Hz to 3 MHz,

50 kHz, 5, 10, 20*, 31.25 MHz*

Signal Analyzer1 Hz to 1 MHz,3*, 10 MHz*

Down to -155 dBm**

9 kHz to 3.6 GHz9 kHz to 6.0 GHz9 kHz to 13.5 GHz

• 9 kHz to 26.5/43 GHz frequency range; 43 GHz max. built-in pre-amp option• Best-of-class wide dynamic range over 6 GHz• 110 GHz max. frequency range; built-in 1st local signal output for external mixer• For wideband down-converter; built-in 1 GHz IF output band• Max 125 MHz Analysis bandwidth (Opt)

Down to -153 dBm**

Spectrum Analyzer30 Hz to 3 MHz, 50 kHz, 5, 10, 20,

31.25 MHzSignal Analyzer1 Hz to 1 MHz,3*, 10 MHz*

9 kHz to 9 GHz9 kHz to 13 GHz9 kHz to 20 GHz9 kHz to 32 GHz9 kHz to 43 GHz

1 Hz to 10 MHz

• Tracking Generator to 20 GHz• Touch screen operation• Performance to rival benchtop units• Burst detect sweep mode captures emitters as short as 200 µs• Options for measuring all of the major wireless standards

* with Option **Option and frequency dependent

9 kHz to 26.5 GHz9 kHz to 43 GHz

Spectrum Analyzer1 Hz to 3 MHz,

50 kHz, 5, 10, 20*,31.25* MHz

Signal Analyzer1 Hz to 1 MHz,3*, 10 MHz*

• Top-class measurement speed• Supports ±0.3 dB (typ.) total level accuracy• SPA, VSA and Vector SG in one box• Low price, high performance and speed• Excellent SSB phase noise (Opt 066)• Max. 125 MHz analysis bandwidth (Opt)• Supports LTE, LTE-Advanced, GSM/EDGE/EDGE Evo, Mobile WiMAX, WLAN, and W-CDMA etc

Down to -146.5 dBm*

MS2830AMS2830A-040MS2830A-041MS2830A-043

MS2687B 9 kHz to 30 GHz

MS2711EMS2712EMS2713E

9 kHz to 3 GHz9 kHz to 4 GHz9 kHz to 6 GHz

1 Hz to 3 MHz1 Hz to 3 MHz1 Hz to 3 MHz

MS2690A

MS2691A

MS2692A

MS2720T

MS2830AMicrowave

MS2830A-044MS2830A-045

FrequencyRange

Spectrum/Signal AnalyzersSuperior performance. Advanced capabilities. Affordable pricing. The Anritsu family of spectrum analyzers/signalanalyzers delivers high frequency / level accuracies and a broad set of smart, intuitive features - including modelswith built-in one button test.

MS2690A/91A/92A Signal Analyzer

• Frequency coverage up to 6.0 GHz/13.5 GHz/26.5 GHz.

• Total level accuracy: ±0.3 dB (typ.)

• Dynamic range: 177 dBTOI: ≥+22 dBm, DANL: -155 dBm/Hz

Signal Analyzer

• Analysis bandwidth: 31.25 MHz (Std.)/62.5 MHz, 125 MHz(Opt.)

• Modulation analysis software (LTE, LTE-AdvancedWiMAX, GSM/GPRS/EDGE, W-CDMA/HSPA/HSPAEvolution, WLAN 11ac/a/b/g/n/p etc.)

• Capture function and Replay function.

Vector Signal Generator

• Level accuracy: ±0.5 dB (typ.)

• BER function, Internal AWGN Generator.

The MS2690A/MS2691A/MS2692ASignal Analyzer has the excellentgeneral level accuracy, dynamic rangeand performance of a high-end

spectrum analyzer. Not only can it capture wideband signalsbut FFT technology supports multifunction signal analyzesin both the time and frequency domains. Moreover, thebuilt-in signal generator function outputs both continuouswave (CW) and modulated signals for use as a referencesignal source.

MS2830A Signal Analyzer (MS2830A-040/041/043)

• Frequency coverage up to 3.6 GHz/6 GHz/13.5 GHz.

• Total level accuracy: ±0.3 dB (typ.)

• Dynamic range: 168 dBTOI: ≥+15 dBm, DANL: -153 dBm/Hz

• SSB phase noise*: -109 dBc/Hz@1 kHz offset-118 dBc/Hz@10 kHz offset

Signal Analyzer• Analysis bandwidth (Opt): 10 MHz/31.25 MHz/62.5 MHz/ 125 MHz.

• Modulation analysis software (LTE, LTE-Advanced,WiMAX, GSM/GPRS/EDGE, W-CDMA/HSPA/HSPAEvolution, WLAN 11ac/a/b/g/n/p etc.)

• Capture function and Replay function.

Vector Signal Generator• Level accuracy: ±0.5 dB (typ.)

• Internal AWGN Generator (Opt.028)

The MS2830A is a high-speed, high-performance, cost-effective SpectrumAnalyzer/Signal Analyzer. Not only can

it capture wideband signals but FFT technology supportsmultifunction signal analysis in both the time and frequencydomains. Moreover, the built-in signal generator functionoutputs both continuous wave (CW) and modulated signalsfor use as a reference signal source. *: with Opt. 066

MS2830A Signal Analyzer Microwave (MS2830A-044/045)

• Frequency coverage up to 26.5 GHz/43 GHz (up to 110 GHz using external mixer)

• Total level accuracy: ±0.3 dB (typ.)

• Dynamic range (25 GHz): 159 dBTOI: +13 dBm, DANL: –146 dBm/Hz

• SSB phase noise: –115 dBc/Hz@100 kHz offset

• Preamp option up to 43 GHz

• Used as wideband down converter: Built-in IF outputfunction, Frequency: 1875 MHz, Bandwidth: 1 GHz (nom.)

Signal Analyzer

• Analysis bandwidth (Opt.): 10 MHz/31.25 MHz/62.5 MHz/125 MHz.

The MS2830A-044/045 Signal Analyzer includes a spectrumanalyzer function for measuring up to 110 GHz using anexternal mixer based on the 26.5 GHz/43 GHz upperfrequency limit. It can be customized to support a range ofapplication-specific measurements.

• The signal analyzer mode can catch the instant change of thefrequency/phase/amplitude/spectrum of the microwave signals.

• Installing a microwave-band preamp supportsmeasurement of weaker signals.

• Using the 1st IF signal output as a down converter supportsanalysis in combination with external equipment.

24 | RF and Microwave Testing Solutions 25w w w. a n r i t s u . c o m

MS4640A Series VectorStar Vector Network Analyzer

• Broadest frequency range from 70 kHz to 110 GHz.

• Fastest swept speed available <20 us per point.

• Superior dynamic range - up to 140 dB.

The world’s widest frequencyrange in a single instrument – 70 kHz up to 70 GHz. Massive 106 dB dynamic range at 70 GHz.Sweep from 70 kHz to 70 GHz in

less than 4 ms, locked and levelled. And innovativePrecision AutoCal calibration makes test routineconfiguration easy.

Whether you are testing performance characteristics of on-wafer devices or developing communications systems foraerospace, military or security use, the MS4640A is the bestthat money can buy.

Features Benefits Applications

• Obtain the most thorough and accurate broadband device characterization. • Eliminate time consuming concatenation process across the RF, microwave/mm-wave bands.• Decrease test instrument expenses by eliminating the need for a 2nd RF VNA.• Reduce the risk of DC extrapolation errors in your device modelling.

• Increase manufacturing revenue by increasing throughput.

• Quickly and easily spot the most hard to find failures and reduce the risk of shipping defective products.

Broadest frequency spanfrom a single coaxial test port covering 70 kHz to 70 GHz in a single instrument and 70 kHz to 110 GHz in the broadband configuration.

Fastest swept synthesized measurement speed <20 usec per point

• Accurately measure medium and high loss devices

• Catch all potential feedthroughs in out-of-band regionsSuperior Dynamic Range - up to 140 dB

High compression point -up to 15 dBm at 70 GHz

• Eliminate the need for additional attenuators • Improve calibration and measurement accuracy

Best test port characteristic -up to 50 dB Directivity, Source Match, Load Match.

• Reduce measurement uncertainty • Reduce measurement guard bands• Improve productivity• Optimum precision in R&D

Highest point resolution - 100,000 points

• Zoom in on narrow band responses without re-calibration

Best device modeling data

• Accurate design cycle• Accurate DC modelling• Eliminate the need for 2nd VNA

Best time domain analysis

• 100,000 points and 700 kHz frequency step size provide the most accurate, highest resolved, low pass mode measurements.• Measure long transmission lines with the best non-aliasing range.

Most convenient automatic calibration system with best accuracy.

• Use Precision AutoCal for an easy, one-button method of VNA calibration and better accuracy than traditional SOLT calibration.• Spend less time setting up the VNA for the next production run.

• Device characterization

• Microwave and milli- meter wave component test

• On-wafer

• Waveguide S-parameter

• R&D and production environments

• Mixer measurements including automatic de-embedded meas- urements with absolute Phase and group delay

• Embed/De-embed applications

• Amplified testing

• Broadband characterization

• Parameter extraction

• Device modeling

MS4642A Series

70 kHz to 20 GHz

MS4644A Series

70 kHz to 40 GHz

MS4647A Series

70 kHz to 70 GHz

VectorStar Family

Microwave and mmwave

VNA

• Industry-best broadband frequency coverage - starts at 70 kHz instead of 10 MHz and operational from 40 kHz to 125 GHz• Industry-best dynamic range: 108 dB vs 83 dB at 65 GHz and 107 dB vs 87 dB at 110 GHz• Industry-best measurement speed: 55 ms vs 500 ms for 201 pts• Industry-best calibration and measurement stability: 0.1 dB vs 0.6 dB over 24 hrs • 16 Single-ended S-parameters • 16 Mixed-mode S-parameters • Flexible port assignments • Single-ended to balanced measurements

ME7838A VectorStarBroadband VNA70 kHz to 750 GHz and beyond

MN469xB series 4-port test sets70 kHz to 20, 40, 50 and 70 GHz

• On-wafer• Circuit simulation• Radio astronomy• Homeland security• Metrology labs

• Differential devices• Multiport devices: combiners, diplexers, couplers• Balanced 2 port devices

MS4645A Series

70 kHz to 50 GHz

Vector Network Analyzers

Anritsu VNAs encompass a wide range of highperformance solutions for R&D, manufacturing, andfield applications in the wireless, satellite, defence,broadband communication, and optoelectroniccomponents markets. Choose between the VectorStar,Lightning, and VNA Master family of VNAs for theperfect solution of advanced performance, accuracy,and reliability. Ideal for measuring any RF andMicrowave component or system - from design andmanufacturing to measurements anytime, anywhere.

“The versatility to completely characterize wireless components and systems.”

Model VNA Frequency SPA Frequency Measurements

MS2026C 5 kHz to 6 GHz -

MS2027C 5 kHz to 15 GHz -

MS2028C 5 kHz to 20 GHz -

MS2036C 5 kHz to 6 GHz 9 kHz to 9 GHz

MS2037C 5 kHz to 15 GHz 9 kHz to 15 GHz

MS2038C 5 kHz to 20 GHz 9 kHz to 20 GHz

Measures all 4 S-parameters, quad-display, Return loss, cable loss, VSWR, Smith Chart, Polar Display, gain, and optional Time Domain, includes LP Processing and Gated Time Domain, DTF, Secure Data

Capabilities of MS2028C PLUS High performance spectrum analysis, channel scanner, interference analysis, spectrograms, signal integrity, demodulation analysis

Handheld VNAs

Benchtop VNAs

MS202xC/3xC Handheld VNA MasterTM

• Active 2-port, 2-path fully-reversing VNA; measures anddisplays all S-parameters with a single connection.

• 350 µsec per data point, ideal for filter tuning.

• 100 dB transmission dynamic range.

• Vector Voltmeter option, ideal for cable phase matching.

The industry's first fully-reversinghandheld VNA with true 12-term errorcorrection for S-parametermeasurements in the field anytime,anywhere. The VNA Master spans the

widest frequency range to support a wide variety of RF andmicrowave systems, both coax and waveguide.

With fast sweep speeds, this flagship of the VNA Masterfamily is ideally suited for tuning requirements at remotesites.

ME7838A VectorStar Broadband VNA

26 | RF and Microwave Testing Solutions 27

Power Meters & Sensors

Anritsu offers a comprehensive range of RF/microwave power meters and sensorscovering a wide variety of applications areas such as LMR, Tetra, APCO/P25, cellularcommunications (e.g., GSM/EDGE, W-CDMA, TD-SCDMA, LTE, and WiMAX), radar, andavionics ranging in frequency from 100 kHz to 65 GHz.

FrequencyRange

100 kHz to

65 GHz

SignalTypes

SensorsVideo

BandwidthsChannels

Measurements/Components

-70 dBm

to +20 dBm

• CW

• Pulse

• Modulated

• True-RMS power

• Peak power

• Burst average power

• Crest factor

• Duty-cycle

• CCDF

• Rise/fall time

• PRI

• Thermal

• High-precision diode

• Universal power

• Wideband

• Pulse

• 100 kHz

• 20 MHz

• 65 MHz

• 1

• 2

PowerRange

Frequency Counters

Model Frequency Range Key Features Key Applications

• Microwave communications and radar. • Aerospace/defence.• LO replacement and signal simulation.• Manufacturing ATE systems.

• Digital modulation of signals for all major wireless communication systems.

• Microwave communications and radar. • Aerospace/defence.• Applications signal simulation.• Manufacturing ATE systems.

• Exceptionally broad frequency coverage. • Ultra-low phase noise.• High-output power. • Analog/Pulse modulation.

• Two RF outputs using Dual RF. • Two signals from one RF out using Dual waveform memory.• High performance (ACLR, SSB phase noise, output power).• 160 MHz baseband signal generator yields high level accuracy and large capacity baseband memory.

• Fast switching speed. • High-output power. • Low phase noise.• Pulse modulation.

0.1 Hz to 70 GHz/500 GHz

and greater

10 MHz to 20 GHz

100 kHz to 2.7 GHz/4 GHz/6 GHz

100 kHz to 2.7 GHz/4 GHz/6 GHz

• High-purity signal source for testing analog radio. • Built-in AM/FM/ΦM/Pulse modulation function (Std.)• Two RF outputs using Dual-RF (Opt.)• Expansion to Narrowband Digital Mod- ulation Signal Generator (Opt.)

• Testing Rx characteristics of analog radio • Testing amplifier distortion and intermod- ulation characteristics.• RF/LO Signal source for evaluating mixer characteristics.• Testing Rx characteristics of narrowband digital radio.

MG3690C SeriesRF/MicrowaveSignal Generator

MG37020A Fast SwitchingMicrowave SignalGenerator

MG3710AVector Signal Generator

MG3740AAnalog Signal Generator

Signal Generators

MG3740A Analog Signal Generator

• Frequency range: 100 kHz to 2.7 GHz/4 GHz/6 GHz.

• SSB phase noise: <-140 dBc/Hz (nom.) (100 MHz, 20 kHzoffset, CW) <-131 dBc/Hz (typ.) (1 GHz, 20 kHz offset).

• Level setting range: -110 to +17 dBm (Std.)-144 to +17 dBm (Opt.)

• High power output: +23 dBm (CW, 400 MHz to 3 GHz).

• Built-in AM/FM/ØM/Pulse modulation function (Std.)

• Two independent RF outputs using Dual-RF (Opt.)

• Supports connection of USB Power Sensor.

• Expansion to Narrowband Digital Modulation SignalGenerator (Opt.) RF modulation bandwidth : 2 MHz

• BER measurement function (Opt.)

The MG3740A Analog SignalGenerator has excellent RFspecifications, including SSB phasenoise, output level, etc., and versatile

modulation functions (AM/FM/ØM/Pulse). The MG3740A isthe ideal solution for high-purity signal source for testinganalog radio Rx characteristics. Moreover, adding the digitalmodulation option supports generation of narrowbanddigital modulation signals. Supports Narrowband Digital aswell as CW and Analog Modulations.

MG3690C RF/Microwave Signal Generator

• Broad frequency coverage in a single output: 0.1 Hz to70/500 GHz.

• Ultra-low SSB phase noise option.

• Standard output power of +17 dBm at 20 GHz.

The MG3690C covers audio, HF,VHF, UHF, RF and microwavefrequencies from 0.1 Hz to 70GHz in single coaxial output and

up to 500 GHz or beyond, with external multipliers. TheMG3690C series is an ideal signal source that is fullyconfigurable for simple to high performance applications -including radar simulation, LO substitution, and clockgeneration.

The MG3690C has three levels of best-in-class SSB phasenoise performance [Standard, Ultra low phase noise (option3) and Premium phase noise (option3X)] along with a fullsuite of modulation capabilities, including a best-in-classpulse modulation option.“The preferred choice of service

providers, network operators andcontractors worldwide.”

w w w. a n r i t s u . c o m

USB Microwave Power Sensors

Included in the Anritsu power measurement portfolio is a family of USBsensors. The sensors provide “bench top” quality measurements,without the need for a meter, directly to a PC or to Anritsu handheldproducts in the field. Most of the sensors have internal and externaltriggering capability that facilitates individual slot power measurementsof TDMA waveforms as well as burst power measurements of periodicand non-periodic waveforms. The family includes a peak inline sensorwith forward and reverse power measurement capability to 150 W. Thesensors can be controlled by PowerXpertTM, a complimentary softwareapplication, or Anritsu Master series of handheld products (equippedwith Option 19).

Visit www.anritsu.com for full details on the complete range ofpower sensors.

MF2400C series Microwave Frequency Counters

• Broadest frequency range from 10 Hz up to 20 GHz, 27 GHz and 40 GHz.

• Measures carrier frequency and pulse width of burstsignals.

• Pass/Fail evaluation for frequency range specified bytemplate function.

• Measurement of any burst section using gating function.

The MF2400C series is composed ofthree frequency counters, ideallysuited for evaluating mobile radiocommunications devices and circuits,

with the ability to measure the carrier frequency and pulsewidth of burst signals.

In addition to displaying measurement results on a 12-digitLCD, the frequency values can be read using the analoguedisplay function, which is ideal for monitoring evaluation andespecially for frequency adjustment.

28 | RF and Microwave Testing Solutions 29w w w. a n r i t s u . c o m

Site Master

2 MHz to 4 GHz• Return loss• Cable loss• SWR• Distance-to-fault• S331L - Built-in power meter (50 MHz to 4 GHz)

• Return loss • SWR• Cable loss• Distance-to-fault• PIM analysis• Adjacent channel power ratio• Interference analysis

• Return loss• 1-port cable loss• Distance-to-fault• 2-port cable loss• Coax and waveguide measurement

2 MHz to 4 GHz

2 MHz to 6 GHz

25 MHz to 10.5 GHz

25 MHz to 20 GHz

2 MHz to 6 GHz

2 MHz to 4 GHz

Cable & AntennaAnalyzer

Frequency Range

SpectrumAnalyzer

9 kHz to 4 GHz

9 kHz to 6 GHz

N/A

N/A

N/A

N/A

N/A

MeasurementsSite Master

S331L Cable and AntennaAnalyzer

S331E Cable and AntennaAnalyzer

S361E Cable and AntennaAnalyzer

S332E Cable and AntennaAnalyzer

S362E Cable and AntennaAnalyzer

100 kHz to 1.6/6 GHzS412E Cable, Antenna, Spectrum,Interference, P25/NXDN Modulation Analyzer

S810D Broadband MicrowaveTransmission Line Analyzer

S820D Broadband MicrowaveTransmission Line Analyzer

• Coverage mapping• AM/FM/PM analyzer• Transmission measurement• Channel power• S412E includes VNA

500 kHz to 1.6/6 GHz

As powerful as it is easy to use, more field technicians choose Site Master than anyother handheld analyzer. And for applications as VHF, broadcasting, paging, LandMobile Radio, cellular, GPS, PCS/GSM, 2.5G, 3G, 4G, WLAN and WiMAX, SiteMaster delivers accurate, repeatable measurements.

Base Station Analyzers

Base Station Analyzer Frequency Measurements

400 MHz to 4/6 GHz(Built-in cable and antenna analyzer)

150 kHz to 7.1 GHz(Built-in spectrum analyzer)

10 MHz to 7.1 GHz(Built-in power meter)

• Spectrum analysis • Interference analysis• Cable loss• LTE and TD-LTE• Mobile WiMAX • TD-SCDMA/HSPA+• W-CDMA/HSPA+ code domain power

• Return loss• Distance-to-fault• Interference analyzer• Transmitter measurements (LTE-FDD/TDD, W-CDMA/HSPA+, GSM/GPRS/EDGE, TD-SCDMA/ HSPA+, CDMA/EV-DO, Fixed/ Mobile WiMAX)

MT8212E Cell MasterMT8213E Cell Master

MT8221B BTS MasterMT8222B BTS Master

• Channel scanner• Return loss• GSM/EDGE channel power• Distance-to-fault• GPS receiver• CDMA/EVDO measurements• Vector Signal Generator

• Cable loss• Channel scanner• GPS receiver• T1/E1/T3 analyzer• Transmission analyzer for 2-port devices

2 MHz to 4/6 GHz(Built-in cable and antenna analyzer)

9 kHz to 4/6 GHz(Built-in spectrum analyzer)

10 MHz to 4/6 GHz(Built-in power meter)

MT8221B/22B Handheld Base Station Analyzer -BTS MasterTM

• Increase system up-time with 1- and 2-port cable andantenna analysis.

• Lab-grade spectrum analysis in a handheld package.

• Demodulate and display W-CDMA/HSPA+, TD-LTE andFDD-LTE signals, CDMA/EVDO and TD-SCDMA.

The MT822XB BTS Master is alightweight, handheld base stationanalyzer that provides wireless fieldtechnicians with a single test solutionfor installing, deploying, and

maintaining today's complex wireless networks.

Weighing less than 5 kg, the MT822XB BTS Mastercomprises a complete set of tools that includes a cable andantenna analyzer, spectrum analyzer and power meter asstandard. Optional signal analysis for LTE-FDD/TDD, W-CDMA/HSPA+, GSM/GPRS/EDGE, CDMA/EV-DO, TD-SCDMA/HSPA+ and WiMAX together with an interferenceanalyzer, channel scanner and a vector signal generator forreceiver testing makes the MT822XB BTS Master the mostversatile, all-in-one unit eliminating the need for techniciansto carry several instruments in the field.

MT8212E/13E Base Station, Cable & AntennaAnalyzer - Cell MasterTM

• 2-port transmission measurement: High/low power.

• Sweep speed: 1 msec/data point, typical.

• Dynamic range: >102 dB in 1 Hz RBW.

• DANL: -162 dBm in 1 Hz RBW.

• Phase noise: -100 dBc/Hz max @ 10 kHz offset at 1 GHz.

The MT821XE is a handheld multi-function base station analyzer thatcombines all the tools required todeploy, maintain and troubleshoot

wireless base stations into a lightweight, battery-operatedpackage. Integrating all this functionality in a singleinstrument eliminates the need to buy separate equipmentfor new and legacy networks, which increases efficienciesand simplifies data acquisition. Cell Master features signalanalyzer options for 2G and 3G cellular networks as well asWiMAX and LTE-FDD/TDD 4G networks.

“Quickly and easily perform all measurements for wireless network

deployment, installation and maintenance.”MW82119A PIM Master Passive IntermodulationAnalyzer

• Small Size: 350 mm x 314 mm x 152 mm (13.8 in x 12.4in x 6.0 in).

• Lightweight: 9.0 kg to 12.2 kg (20 lb. to 27 lb.)depending on frequency band.

• Battery Operated: 12 V Li-Ion battery.

• 25 dBm (0.3 Watt) to 46 dBm (40 Watt) output power.

Battery-operated, high power Passive Intermodulation(PIM) testing solution for the major wireless standardsin use around the world. The PIM Master’s small sizeand lightweight, combined with battery operation,make it the ideal solution for verifying PIMperformance at difficult to access sites such as RemoteRadio Head (RRH) installations or indoor DistributedAntenna Systems (DAS).

PIM MasterThe PIM Master includes Anritsu’s patented Distance-to-PIM (DTP) technology for accurately determiningthe location of PIM faults, both inside the feed systemas well as beyond the antenna. Distance-to-PIM allowstechnicians to quickly andefficiently locate PIM sourcesat a site resulting in quickersite repairs and lower cost.

Frequency Options

LTE 700 MHz (Upper & Lower) Cellular 850 MHz E-GSM 900 MHz DCS 1800 MHz PCS 1900 MHz PCS/AWS 1900/2100 MHz

30 | Service and Support 31w w w. a n r i t s u . c o m

Service and Support

As well as a local support network, Anritsu has invested in state-of-the art calibration facilities and European centres-of-excellence. These provide calibration and repair facilities across the product range; from mobile radio through RF andMicrowave, to digital and optical technology.

Our support network is constantly developing to meet customer demands. All calibration is backed up by traceability to nationaland international standards and is ISO compliant.

The complete “peace of mind” support package covering your first three years of Anritsu product ownership.

Anritsu understands that the decisions made when purchasing test and measurementequipment are not taken lightly. The investment in equipment that will perform essentialtasks across research and development, conformance testing, manufacturing,installation and maintenance are most certainly mission and business critical.

Anritsu stands by the quality of its products and the after sales support service beyond initial purchase. We alsounderstand that when purchasing these products you need assurances that there will be no surprises or financialshocks within the first few years of ownership.

Anritsu’s a.sure service & support products are designed to give you complete control of your operational costs aswell as complete peace of mind for your Anritsu product, by ensuring the minimum possible downtime at incrediblygood value “up front” to you, the customer.

By taking advantage of our a.sure products at these special low cost prices at the time of equipment purchase, youcan rest easy that your product will have the highest possible availability and usage levels with true cost efficiency& operational cost control.

What a-sure products are available?

• a.sure - Three years extended warranty from purchase on your Anritsu product. (inc priority web-based customersupport).

• a.sure Accidental Damage – This extends the basic a.sure warranty product to cover repairs (if possible) causedby accidental (not deliberate) damage to the product for 3 years from purchase. (Limited to a maximum of 1repair per year, no replacement if equipment is beyond repair).

• a.sure Calibration – This adds calibration to the extended warranty and provides 2 calibrations on the instrumentto cover its first 3 years of life. (ie at the beginning of year 2 and beginning of year 3 of ownership).

• a.sure Complete – All the above at a superb discounted price.

The a.sure service products are structured as a three year, “return to base” extended warranty, repair or calibrationservice, depending on what a.sure product is purchased. Onsite support can also be provided for an extra premiumif required.

Any product that is regularly inspected and calibrated by an Anritsu test and Calibration Laboratory will automaticallybe checked for faults, repaired as necessary (with customer approval depending on repairs times) and all softwareupdated if appropriate.

The web-based support tool will be available via the Anritsu internet web-site and is intended to allow customersto submit service based, equipment operating based or application based requests. A call back facility will also beprovided to allow customers to talk directly to an Anritsu specialist about their particular issue. Call back will initiallybe provided in English, French, German, Swedish and Italian.

Calibration

There are two levels of calibration service available, providing a choice to meet the varying levels of customer need.

Silver - The Silver package includes calibration in accordance with the Full Manufacturer's Published Performance Specification.Results data sheets including the addition of uncertainties where available are provided.

Gold - The Gold package extends the Silver package to include the detailed adjustment of the instrument. It includes aCertificate of Calibration with calibration results against Full Manufacturer's Published Performance Specification parameters.This is in the form of a results data sheet, including both 'before and after' adjustment and repair values, with uncertainties beingprovided where available.

Flexible Calibration and Maintenance Contracts - With the Anritsu range of flexible contracts, we are confident that there issomething for everyone. The modular concept means you can add options together to create a calibration and/or maintenancesolution which is unique to you and your company's needs.

On-Site Calibrations - If you can't afford to be without your equipment for any length of time, even for calibration, don't despair.By travelling to your site of operations and calibrating your equipment there and then, we can ensure that down time is kept toan absolute minimum.

EMEA Training

Anritsu provides training services to help customers gain a competitive advantage and stay up to date in today's world of rapidlychanging technology. Anritsu has a dedicated team of professionals, each an expert in their individual field who are able to offertraining across the EMEA region.

We understand that no two customers are the same, so in addition to our well established generic training courses, we can offerspecific bespoke product training tailored to your personal requirements.

Courses currently available include:

Training Course Content Instrument Duration

Certified Site Master Line Sweeping

Handheld Spectrum Analyzer & Interference

PIM Master Certified PIM Measurement

A two day instructor led training course that focuses on RF line sweeptheory and technology return loss, cable loss, DTF, 2 ports basics.

Provides an introduction to spectrum analysis. Overview of the instrument, interference types definitions and basic measurements.

This course is designed for new owners of the CMA 3000 who wish to familiarise themselves quickly with the basic instrument operation.

The course for new owners who wish to familiarise themselves quickly withthe basic instrument operation.

Sxxxx; MS20xx,MT82xx

Sxxxx; MS20xx, MT82xx, MS27xx

MW82119A

CMA3k

CMA 5k,MS9710C

2 days

1 day

1 day

1 day

1 day

An intensive one-day instructor led training course that focuses on making PIM measurements (theory and lab). The last half of the class is used for taking the hands-on practical exam, and the written test.

CMA 3000 Field Tester for Fixed and Mobile Networks

CMA5000a Multi-Layer Network Tester Basic Ops

• United StatesAnritsu Company1155 East Collins Blvd., Suite 100, Richardson, TX 75081, U.S.A.Toll Free: 1-800-267-4878Phone: +1-972-644-1777Fax: +1-972-671-1877

• CanadaAnritsu Electronics Ltd.700 Silver Seven Road, Suite 120, Kanata, Ontario K2V 1C3, CanadaPhone: +1-613-591-2003 Fax: +1-613-591-1006

• Brazil Anritsu Eletrônica Ltda.Praça Amadeu Amaral, 27 - 1 Andar01327-010 - Bela Vista - São Paulo - SP - BrazilPhone: +55-11-3283-2511Fax: +55-11-3288-6940

• MexicoAnritsu Company, S.A. de C.V.Av. Ejército Nacional No. 579 Piso 9, Col. Granada11520 México, D.F., MéxicoPhone: +52-55-1101-2370Fax: +52-55-5254-3147

• United KingdomAnritsu EMEA Ltd.200 Capability Green, Luton, Bedfordshire, LU1 3LU, U.K.Phone: +44-1582-433200 Fax: +44-1582-731303

• FranceAnritsu S.A.12 avenue du Québec, Bâtiment Iris 1- Silic 612,91140 VILLEBON SUR YVETTE, FrancePhone: +33-1-60-92-15-50Fax: +33-1-64-46-10-65

• GermanyAnritsu GmbHNemetschek Haus, Konrad-Zuse-Platz 1 81829 München, Germany Phone: +49-89-442308-0 Fax: +49-89-442308-55

• ItalyAnritsu S.r.l.Via Elio Vittorini 129, 00144 Roma, ItalyPhone: +39-6-509-9711 Fax: +39-6-502-2425

• SwedenAnritsu ABBorgarfjordsgatan 13A, 164 40 KISTA, SwedenPhone: +46-8-534-707-00 Fax: +46-8-534-707-30

• FinlandAnritsu ABTeknobulevardi 3-5, FI-01530 VANTAA, FinlandPhone: +358-20-741-8100Fax: +358-20-741-8111

• DenmarkAnritsu A/S (Service Assurance)Anritsu AB (Test & Measurement)Kay Fiskers Plads 9, 2300 Copenhagen S, DenmarkPhone: +45-7211-2200Fax: +45-7211-2210

• RussiaAnritsu EMEA Ltd. Representation Office in RussiaTverskaya str. 16/2, bld. 1, 7th floor.Russia, 125009, MoscowPhone: +7-495-363-1694Fax: +7-495-935-8962

• United Arab EmiratesAnritsu EMEA Ltd.Dubai Liaison OfficeP O Box 500413 - Dubai Internet CityAl Thuraya Building, Tower 1, Suit 701, 7th FloorDubai, United Arab EmiratesPhone: +971-4-3670352Fax: +971-4-3688460

• SingaporeAnritsu Pte. Ltd.60 Alexandra Terrace, #02-08, The Comtech (Lobby A)Singapore 118502Phone: +65-6282-2400Fax: +65-6282-2533

• IndiaAnritsu India Private Limited. India Branch Office2nd & 3rd Floor, #837/1, Binnamangla 1st Stage, Indiranagar, 100ft Road, Bangalore - 560038Phone: +91-80-4058-1300Fax: +91-80-4058-1301

• P.R. China (Shanghai)Anritsu (China) Co., Ltd.Room 1715, Tower A CITY CENTER of Shanghai, No.100 Zunyi Road, Chang Ning District, Shanghai 200051, P.R. ChinaPhone: +86-21-6237-0898Fax: +86-21-6237-0899

• P.R. China (Hong Kong)Anritsu Company Ltd.Unit 1006-7, 10/F., Greenfield Tower, Concordia Plaza,No. 1 Science Museum Road, Tsim Sha Tsui East, Kowloon, Hong Kong, P.R. ChinaPhone: +852-2301-4980Fax: +852-2301-3545

• JapanAnritsu Corporation8-5, Tamura-cho, Atsugi-shi, Kanagawa, 243-0016 JapanPhone: +81-46-296-1221Fax: +81-46-296-1238

• KoreaAnritsu Corporation, Ltd.502, 5FL H-Square N B/D, 681Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400 KoreaPhone: +82-31-696-7750Fax: +82-31-696-7751

• AustraliaAnritsu Pty. Ltd.Unit 21/270 Ferntree Gully Road, Notting Hill, Victoria 3168, AustraliaPhone: +61-3-9558-8177Fax: +61-3-9558-8255

• TaiwanAnritsu Company Inc.7F, No. 316, Sec. 1, NeiHu Rd., Taipei 114, TaiwanPhone: +886-2-8751-1816Fax: +886-2-8751-1817

Specifications are subject to change without notice.

1202

Printed on Recycled Paper

Please Contact:

No. MG3710A-E-L-1-(1.00) Printed in Japan 2012-3 MGRev 02/13