TELEMETRY & IoT TERMINALS miTrack-GT1/GT2
2
miTrack GT1 & GT2 series are GSM/GPRS/Ethernet control terminal with a compact enclosure that encapsulates everything needed for wired and/or wireless M2M & IOT applications. Besides Dual Band support, optional quad band GPRS/GSM unit also supports 850/900/1800/1900MHz allows for applications to be deployed worldwide. The GTX series breaks through the barriers of M2M connectivity by minimizing investment and reducing total system costs. The GTX series contains all technology required to operate on the GSM and/or Ethernet network with external SIM card input. miTrack-GT1/GT2 TELEMETRY & IoT TERMINALS telemetry devices family GTX has broad-band connection over ethernet. In the case of no-connection from ethernet, device can connect to cloud automaticly over GPRS . GTX enables large memory for offline data log during temporary connection problems. Stores all data and sends to cloud when the connection is re- established. GTX is connectable with serial communication ports and digital I/O ports. GT1' s USB port can connect an industrial computer to internet via PPPconnection. PLC devices, electronic utility meters and devices which use MODBUS can be remotly monitored with MODBUS RTU. Logging Feature 4GB SD USB, Rs232, RS485, I/O Ethernet & GSM Connections ModBus Connection The GTX series allows for stand-alone use via industry standard interconnects or system integration via standard 3.81 mm terminal plugs, further reducing the need for additional hardware costs. The GTX adopts high-powered industrial 32-bit CPU and embedded Linux / Real Time Operating system. It supports RS232 and RS485 port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial devices with only basic configuration. The GT1 and GT2's ability to configure up to 12 GPIOs as 6x optoisolated inputs and 6x open collector outputs makes the terminal both innovative and cost effective. The ease of application development and optional GPS integration also opens the door for further system cost reduction. Adaptable and easy to use, the GTX is ideal for use in M2M Telemetry, Internet of Things and Telematic applications including fleet and asset management, vending, security, alarm monitoring, e-maintenance and other telemetry applications. The terminal can also be used in factory automation, environmental monitoring and remote device management for M2M industry. Meanwhile, it is supplied with simple and user friendly PC Configurator to configuration, easy to installation. The GT2 series is a new generation embedded computing platform supporting Linux Operating System for professional developers. Linux Kernel & Sofware Development Kit is also provided. GTX series also support Modbus RTU that is special for transparent transferring data or under Modbus RTU Protocol transferring between RS485 port and internet over GPRS/Ethernet network. Versions of the GTX are available as an open frame module. Please refer to GTX datasheet for open frame design considerations. Minova Technology www.minovatech.com Auf dem Wall 29 78628 Rottweil / Germany T : +49 (0) 741 348 51 564 F : +49 (0) 741 206 75 139
Transcript of TELEMETRY & IoT TERMINALS miTrack-GT1/GT2
miTrack GT1 & GT2 series are GSM/GPRS/Ethernet control terminal with a compact enclosure that encapsulates everything needed for wired and/or wireless M2M & IOT applications. Besides Dual Band support, optional quad band GPRS/GSM unit also supports 850/900/1800/1900MHz allows for applications to be deployed worldwide. The GTX series breaks through the barriers of M2M connectivity by minimizing investment and reducing total system costs.
The GTX series contains all technology required to operate on the GSM and/or Ethernet network with external SIM card input.
miTrack-GT1/GT2TELEMETRY & IoT TERMINALS
telemetry devices family
GTX has broad-band connection over ethernet. In the case of no-connection from ethernet, device can connect to cloud automaticly over GPRS .
GTX enables large memory for offline data log during temporary connection problems. Stores all data and sends to cloud when the connection is re-established.
GTX is connectable with serial communication ports and digital I/O ports. GT1' s USB port can connect an industrial computer to internet via PPPconnection.
PLC devices, electronic utility meters and devices which use MODBUS can be remotly monitored with MODBUS RTU.
Logging Feature4GB SD
USB, Rs232,RS485, I/O
Ethernet & GSM Connections
ModBusConnection
The GTX series allows for stand-alone use via industry standard interconnects or system integration via standard 3.81 mm terminal plugs, further reducing the need for additional hardware costs. The GTX adopts high-powered industrial 32-bit CPU and embedded Linux / Real Time Operating system. It supports RS232 and RS485 port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial devices with only basic configuration.
The GT1 and GT2's ability to configure up to 12 GPIOs as 6x optoisolated inputs and 6x open collector outputs makes the terminal both innovative and cost effective. The ease of application development and optional GPS integration also opens the door for further system cost reduction.
Adaptable and easy to use, the GTX is ideal for use in M2M Telemetry, Internet of Things and Telematic applications including fleet and asset management, vending, security, alarm monitoring, e-maintenance and other telemetry applications. The terminal can also be used in factory automation, environmental monitoring and remote device management for M2M industry. Meanwhile, it is supplied with simple and user friendly PC Configurator to configuration, easy to installation.
The GT2 series is a new generation embedded computing platform supporting Linux Operating System for professional developers. Linux Kernel & Sofware Development Kit is also provided. GTX series also support Modbus RTU that is special for transparent transferring data or under Modbus RTU Protocol transferring between RS485 port and internet over GPRS/Ethernet network. Versions of the GTX are available as an open frame module. Please refer to GTX datasheet for open frame design considerations.
Minova Technology
w w w . m i n o v a t e c h . c o mAuf dem Wall 29 78628 Rottweil / Germany T : +49 (0) 741 348 51 564 F : +49 (0) 741 206 75 139
TELEMETRY & IoT TERMİNALS
telemetry devices family
GT1 Series GT2 Series
Operating System FreeRTOS Linux Kernel 3.2
CPU Arm Cortex M0+ 72 MHz Arm Cortex A8 800 Mhz RAM 40 KB SRAM 256MB DDR2 RAMFlash 256 KB Flash 256 MB Flash
External Storage SD Memory 8 GB 8GB External Flash 1MB Serial Flash & 256 KB FRAM 1MB Serial Flash & 256 KB FRAM
GSM Telit GL865-DUAL or GL865-QUAD 850/900/1800/1900 MHz Optional 3G Support Antenna External
GPS No Telit Jn3 Antenna - External
Protocols TCP/IP, UDP, HTTP, SMS Full Network Management with Linux
Backup Battery 900 to 5000 mAh Li-Ion Battery No
RTC Backup Yes Yes
Operating Voltage 8 - 36 V DC 8-60 V DC Operating Temperature -30 to +80 °C -20 to +80 °C Storage Temperature -40 to +85 °C -40 to +85 °C
Interfaces USB Device 2.0 Host 2.0 Ethernet 10 Base T 10/100 Base T Rs232 1 1 Rs485 1 1 CAN Bus N/A 1 PWM N/A 3 Analog Inputs 1 3 Digital Inputs 6 3 Digital Outputs 6 3 Relay Outputs 2 N-O 2Amp (Open Coll.) N/A
SDK Support Yes Yes (Under NDA)
TECHNICAL SPECS & PRODUCT VARIANTS
Minova Technology
w w w . m i n o v a t e c h . c o mAuf dem Wall 29 78628 Rottweil / Germany T : +49 (0) 741 348 51 564 F : +49 (0) 741 206 75 139
miTrack-GT1/GT2
Specifications are subject to change without notice. Copyright 2016 Minova Technology. All Rights Reserved. All product & company names are the property of their respective owners. Reproduction of this document is prohibited without permission of Minova.
