Technical Specifications TL-FO2-VLC · TL-FO2-VLC Technical Specifications v191015 |...
4
TL-FO2-VLC Technical Specifications v191015 www.tlnetworx.com | +1-608-960-7242 Technical Specifications TL-FO2-VLC The TL-FO2-VLC is an HDMI 2.0 (18G signal) with HDCP 2.2 support fiber optic extender set that can reach up to 10km over a duplex fiber optic cable with common LC terminations. The unit supports HDMI video resolutions up to 4K@60, HDR video, IR or RS232 pass-through controls and multichannel audio. Integrated mounting ears are included on both the Tx and Rx units. The TL-FO2-VLC uses color space conversion to reduce 18gbps bandwidth signals to 10gbps in order to successfully transmit the signal over the 10gbps link provided by the included SFP+ modules. The video is restored to the original signal at the receiver (Rx). Bidirectional IR or RS232 control signals are extended simultaneously to the video and audio signals. Only one control method may be used at a time. The units include ‘Mode’ Switches to enable/disable the IR signal. The product is available in two variations: The TL-FO2-VLC-SM includes single mode fiber optic modules and have a maximum distance of 10km. The TL-FO2-VLC-MM includes multimode fiber optic modules and has a maximum distance of 300m. Features at a Glance • Transmit HDMI and IR or RS232 over two fiber optic conductors • LC connectors for fiber connection • Single & multimode fiber compatible • Extend 18G HDMI up to 10km • HDMI 2.0 & HDCP 2.2 compliant • 4K@60 compliant • Immune to RF & EM interference
Transcript of Technical Specifications TL-FO2-VLC · TL-FO2-VLC Technical Specifications v191015 |...
TL-FO2-VLC Technical Specifications v191015
www.tlnetworx.com | +1-608-960-7242
Technical Specifications TL-FO2-VLC
The TL-FO2-VLC is an HDMI 2.0 (18G signal) with HDCP 2.2 support fiber optic extender set that can reach up to 10km over a duplex fiber optic cable with common LC terminations. The unit supports HDMI video resolutions up to 4K@60, HDR video, IR or RS232 pass-through controls and multichannel audio. Integrated mounting ears are included on both the Tx and Rx units. The TL-FO2-VLC uses color space conversion to reduce 18gbps bandwidth signals to 10gbps in order to successfully transmit the signal over the 10gbps link provided by the included SFP+ modules. The video is restored to the original signal at the receiver (Rx). Bidirectional IR or RS232 control signals are extended simultaneously to the video and audio signals. Only one control method may be used at a time. The units include ‘Mode’ Switches to enable/disable the IR signal. The product is available in two variations: The TL-FO2-VLC-SM includes single mode fiber optic modules and have a maximum distance of 10km. The TL-FO2-VLC-MM includes multimode fiber optic modules and has a maximum distance of 300m.
Features at a Glance
• Transmit HDMI and IR or RS232 over two fiber optic conductors
• LC connectors for fiber connection • Single & multimode fiber compatible • Extend 18G HDMI up to 10km • HDMI 2.0 & HDCP 2.2 compliant • 4K@60 compliant • Immune to RF & EM interference
TL-FO2-VLC Technical Specifications v191015
www.tlnetworx.com | +1-608-960-7242
Specifications Transmitter Input/Output HDMI Input 1 HDMI Receptacle – Type A Female Optical Output 2 LC Ports via SFP+ Module IR Input/Output 2 3.5mm TRS Ports RS232 1 DE-9 Female Connector 12V DC 1 5.5mm OD/2.5mm ID Barrel Connector Mode Selector 3 2-position Rocker DIP Switch Receiver Input/Output HDMI Output 1 HDMI Receptacle – Type A Female Optical Input 2 LC Ports via SFP+ Module IR Input/Output 2 3.5mm TRS Ports RS232 1 3-pin Removable Terminal Block 12V DC 1 5.5mm OD/2.5mm ID Threaded Barrel Connector Control Selector 1 2-position Switch Supported Audio, Video, and Control Compatible Video Signals All SD, HD, and other resolutions up to
- 4K/60 Hz / RGB and 4:4:4 8 bit (HDR) - 4K/60 Hz / 4:2:2 10 bit (HDR) - 4K/60 Hz / 4:2:0 10 bit (HDR)
Video Compliance HDMI 2.0, HDMI 1.4, DVI 2.0 (Pixel clock up to 600 MHz) Digital Content Protection HDCP 1.2 / HDCP 2.2 Compatible Embedded Audio LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24,
DTS High Res, DTS-HD Master Audio, DSD Supported RS232 Baud Rates 2400, 4800, 9600, 19200, 38400, 57600, 115200 Supported IR Carrier 20 to 60 kHz Fiber Optic Transmission Characteristics Required Cable Type TL-FO2-VLC-MM: 2 strand OM3/4/5
TL-FO2-VLC-SM: 2 strand OS2 Maximum Bandwidth 10 Gbps
Maximum Distance with Included SFP+ Modules TL-FO2-VLC-MM: 300m (984 ft) TL-FO2-VLC-SM: 10km (32,808 ft)
Signal Compression 1.8:1 Maximum; Compression starts when video signal >9 Gbps Chassis and Environmental Product Construction Painted Steel Product Dimensions (W*H*D) 157 mm (6.18 in) x 23 mm (0.91 in) x 112 mm (4.41in) Product Operational Chassis Temperature 35 to + 44°C (95 to + 111 °F) Environmental Operating Temperature 0 to + 45°C (32 to + 113 °F) Environmental Operating Humidity 10% to 90%, non-condensing Environmental Storage Temperature -20 to +70°C (-4 to + 158 °F) Environmental Storage Humidity 10% to 90%, non-condensing Power and Regulatory Power Supply Inlet IEC 60320/C8 Power Supply Input 100-240V AC at 50/60 Hz; 0.5A Max Power Supply Output 12V DC at 2 A Maximum Power Consumption 20 watts ESD Protection Human-body Model: ±8kV Air-gap discharge and ±4kV Contact discharge Regulatory Compliance UL/C-UL, C-Tick, TUV/GS, FCC, CE, RoHS, WEEE Other Warranty Three years Diagnostic LEDs Link and Power Included Accessories TL-FO2-VLC-MM: Receiver (1 ea), Transmitter (1 ea), 12V 2A DC Power
Supply (2 ea), IR Receiver (1 ea), IR Transmitter (1ea), TL-10GSFPP-MM300 (2 ea) TL-FO2-VLC-SM: Receiver (1 ea), Transmitter (1 ea), 12V 2A DC Power Supply (2 ea), IR Receiver (1 ea), IR Transmitter (1ea), TL-10GSFPP-SM10K (2 ea)
TL-FO2-VLC Technical Specifications v191015
www.tlnetworx.com | +1-608-960-7242
Transmitter Dimensional Drawings
TL-FO2-VLC Technical Specifications v191015
www.tlnetworx.com | +1-608-960-7242
Receiver Dimensional Drawings
