Technical Program

1

Welcome Message

On behalf of the SDEMPED 2015 Organizing Committee, I would like to welcome you all to

Guarda (Portugal) for the 10th edition of the IEEE International Symposium on Diagnostics for

Electric Machines, Power Electronics and Drives (SDEMPED 2015).

It is really a great honor and a pleasure as well, to have the privilege to host SDEMPED for the

first time in Portugal. SDEMPED has been established as the only international symposium

entirely devoted to the diagnostics of electrical machines, power electronics and drives. Started

in 1997 in Carry-le-Rouet (France), under the leadership of Professor Gérard-André Capolino and

Professor Giuseppe Buja, SDEMPED is now a regular biennial event mainly organized in Europe.

Very successful recent editions have been held in Vienna (Austria) in 2005, Cracow (Poland) in

2007, Cargèse (France) in 2009, Bologna (Italy) in 2011, and Valencia (Spain) in 2013.

For the 2015 edition, SDEMPED has received the financial co-sponsorship of the IEEE Power

Electronics Society, the IEEE Industry Applications Society and the IEEE Industrial Electronics

Society.

Portugal has been chosen for the 2015 edition of the symposium, and CISE - The

Electromechatronic Systems Research Centre (http://www.cise.ubi.pt/en/index.html) is in

charge for its organization. The SDEMPED 2015 Organizing Committee wishes you a very

successful symposium.

Enjoy Portugal, enjoy SDEMPED 2015 and join us to make SDEMPED 2015 a memorable event!

Antonio J. Marques Cardoso

General Chair

2

Sponsors

Financial Sponsors

IEEE Power Electronics Society (PELS)

IEEE Industry Applications Society (IAS)

IEEE Industrial Electronics Society (IES)

Institutional Sponsors

Electromechatronic Systems Research Centre (CISE)

University of Beira Interior (UBI)

Polytechnic Institute of Guarda (IPG)

Câmara Municipal da Guarda

Industrial Sponsors

Dewetron

WEG

Yokogawa

Indielec

Cedrat

KSB

J. Roma

EDP

Other Sponsors

Natura IMB Hotels

Hotel Vanguarda

Hotel Lusitânia

3

Committees

GENERAL CHAIR

Antonio J. Marques Cardoso (Portugal)

HONORARY CO-CHAIRS

Giuseppe Buja (Italy)

Gérard-André Capolino (France)

TECHNICAL PROGRAM CO-CHAIRS

Chiara Boccaletti (Italy)

Jorge O. Estima (Portugal)

SPECIAL SESSIONS CO-CHAIRS

Sang Bin Lee (Korea)

Eunice Ribeiro (Portugal)

TUTORIALS CO-CHAIRS

Jose A. Antonino-Daviu (Spain)

Luís Oliveira (Portugal)

PUBLICITY CO-CHAIRS

Vicente Leite (Portugal)

Elias Strangas (USA)

LOCAL ORGANIZING COMMITTEE

Adérito Alcaso (Logistics)

Acácio Amaral

Sylvie Ângelo (Secretary)

Chiara Boccaletti

Jorge O. Estima

Ângela Ferreira (Logistics)

Davide Fonseca (Treasurer)

Vicente Leite

António J. Marques Cardoso

Luís Oliveira

Figueiredo Ramos (Logistics)

Eunice Ribeiro

Ana Vieira (Logistics)

Luca Zarri (ReviewNow)

INTERNATIONAL STEERING COMMITTEE

Gérard-André Capolino (Chair)

Fiorenzo Filippetti (Vice-Chair)

Sang Bin Lee (Secretary)

Alberto Bellini (Awards Chair)

Jose A. Antonino-Daviu

Giuseppe Buja

Manes Fernandez-Cabanas

Thomas Habetler

Ronald Harley

Humberto Henao

Marian Kazmierkowski

Antonio J. Marques Cardoso

Martín Riera-Guasp

Tadeusz Sobczyk

Elias Strangas

4

General Information

The City of Guarda

The origins of the city of Guarda date back to a long

time in history. The original traces that are still visible

take us back to the Neolithic Period, the best examples

being the dolmen of Pêra do Moço and the stone axes

which can be seen in the city museum. The Tintinolho

and Jarmelo forts and a stretch of a Roman Road are

other important historical remnants of the Bronze Age

and the Roman Period, respectively.

In 1199 D. Sancho I, the second king of Portugal, founded the city of Guarda by royal decree in

order to encourage a local population to settle and at the same time to provide a defense from

possible Spanish invasion through the eastern frontier of Portugal.

The city of Guarda was the stage of important military

events that took place in Portuguese history, namely

in times when Portugal had to fight for its

independence. It was also the place chosen by several

kings of the first and second dynasties to ratify

treaties, establish diplomatic agreements and summon

the Court.

Guarda is associated with military defense and

religious traditions. This legacy is evident in its patrimony: the Torre de Menagem, dating back to

the twelfth century; the ruins of medieval walls; the Cathedral, built between the fourteenth and

sixteenth centuries; the Monastery of Saint Francis; the baroque churches of Misericórdia and

Saint Vicent and the old Bishop’s Palace. The Chapel of Mileu, a place dedicated to the cult of

the Virgin Mary, dates back to the romantic period.

Guarda is located in the interior of Portugal, in the Serra da Estrela region, and is known as the

highest city in the country (1,056 metres).

Its natural resources make Guarda a mountain city

with wild landscapes that offer a magnificent scenery.

Guarda is known as the city of the 5 F’s: Fria (cold) –

due to the typical mountain weather; Forte (strong),

because it defended the country from possible

invasions; Farta (plentiful), because the fertile

Mondego valley always responded to the needs of the

population; Fiel (loyal), due to the courage and

determination in not surrendering to the King of Castille; and Formosa (beautiful), for its natural

beauty.

5

Symposium Venue

SDEMPED 2015 will be held in Polytechnic Institute of Guarda (IPG), at the Escola Superior de

Tecnologia e Gestão (ESTG), inside the IPG campus.

All sessions will take place in the Auditorium and rooms Park and Tesla at the aforementioned

school.

Address:

Polytechnic Institute of Guarda (IPG)

Av. Doutor Francisco Sá Carneiro, 50 6300-559 Guarda, Portugal GPS: N 40° 32´ 31.356" W 7° 16´ 55.858"

Official language

The official language of the Symposium is English, for presentations, discussions and conference

activities.

Presenters

All SDEMPED 2015 presentations are oral.

Every author presenting a paper is kindly requested to meet his/her session chairs in the session

room 15 minutes before the starting is scheduled in order to upload his/her presentation in the

computer. It is not possible to change the computer in between presentations.

6

The duration of each presentation is limited to 20 minutes, including discussion. The authors are

encouraged to conclude their oral presentation within 15 minutes (corresponding to a

presentation of 15-20 slides) and to let 5 minutes for questions. Before the presentation a

session chair will read the short bio provided by the author during the paper submission process.

Session Chairs

The session chairs have the responsibility to make the schedule strictly respected. Each

presentation plus discussion should not exceed 20 minutes.

In the event of “no-show”, the session chair must wait 20 minutes for the next paper or to close

the session if it is the last paper.

All the rooms will be equipped with a video projector and a screen. The session chairs will be

assisted by a conference staff member, one per room, for all the session duration.

Internet access

A free Internet wireless access will be provided to all SDEMPED 2015 participants. Please login to

the WiFi network named “SDEMPED” using the password “SDEMPED_2015”.

Identification Badges

The different SDEMPED 2015 participation categories are identified in the badges using the

following color code:

International Steering Committee Member

Local Organizing Committee Member

Session Chair

Author/Presenter

Participant

Student

Sponsor

Registration

Registration is required for all symposium participants, including officials, session chairpersons,

exhibitors and authors. Accompanying members do not need to register for the event but must

register and pre-pay for the Gala Dinner.

7

Registration Desk

The registration desk will be placed at the ESTG main entrance, in the exhibit hall floor. It will be

open on September 1st from 14h00m till 17h50m; on September 2nd from 8h30m till 17h50m and

from 3rd to 4th between 8h30m and 18h00m.

SDEMPED Lounge

A room will be made available to all SDEMPED 2015 participants, to be used to talk with other

attendees, to relax or catch up on home office news.

Bus Transportation

Regular bus transportation between the SDEMPED 2015 official hotels/IPG students’ residences,

the IPG and the main social events, will be provided during the symposium period:

August 31st, 19h30 – Lisbon Airport → Lusitânia/Vanguarda hotels and IPG students’

residences;

September 1st, 13h30 – Lisbon Airport → Lusitânia/Vanguarda hotels and IPG students’

residences;

September 1st, 18h00 – Lusitânia/Vanguarda hotels and IPG students’ residences →

Guarda’s Paço da Cultura;

September 2nd, 3rd, 4th, 8h00; 10h15 – Lusitânia/Vanguarda hotels and IPG students’

residences → IPG;

September 2st, 17h50 – IPG → Guarda’s Old Square;

September 3rd, 17h50 – IPG → Lusitânia/Vanguarda hotels and IPG students’ residences;

September 3rd, 18h50 – Vanguarda hotel and IPG students’ residences → Lusitânia hotel;

September 3rd, 23h30 – Lusitânia hotel → Vanguarda hotel and IPG students’ residences;

September 4th, 18h50 – IPG → Lusitânia/Vanguarda hotels and IPG students’ residences;

September 5th, 8h30 – Lusitânia/Vanguarda hotels and IPG students’ residences →

Lisbon Airport.

Useful Contacts

Emergency number: 112

Taxis: +351 271 221 183

Tourist Information Office: +351 271 205 530 / +351 926 576 026

8

Accommodation

Lusitânia Hotel

Tel.: +351 271 238 285 Email: congresso@naturaimbhotels.com Address: Urbanização Quinta das Covas, Lote 34 6300 - 389 Guarda GPS: lat 40.559288 | long -7.230411

Vanguarda Hotel

Tel.: +351 271 208 390 Email: congresso@naturaimbhotels.com Address: Avenida Monsenhor Mendes do Carmo 6300-586 Guarda GPS: lat 40.542969 | long -7.266433

IPG Students Residence

Tel.: +351 271 220 141 Email: sas@ipg.pt

IPG Campus Residence: GPS: lat 40.541395 | long -7.28329 City Center Residence: GPS: lat 40.535425 | long - 7.271538

9

Social Events

Welcome Reception

A Welcome Reception will be held on Tuesday, September 1st, between 18h30 and 20h30 in the

Guarda’s Paço da Cultura.

Address:

Rua General Alves Roçadas, 28

6300-663 Guarda

GPS: lat 40.5378877 | long -7.2676863

Refreshments and Lunches

Coffee breaks and lunches are included in the registration fees. Lunches will be served in the IPG

restaurant and coffee breaks will be served in the exhibit hall floor.

Cultural Tour, Visit to Guarda

A cultural tour through the city of Guarda is scheduled on Wednesday, September 2nd, between

17h50 and 19h50. Bus transportation will be provided from IPG to Guarda’s Old Square, where

the cultural tour starts.

Gala Dinner

The Gala Dinner will be held on Thursday, September 3rd at Lusitânia Hotel from 19h00 till

23h00. Both formal and smart casual dresses are acceptable for the banquet. You should have

your invitation in hand. Accompanying person must register or have acquired an invitation for

this special event. The award ceremony will be held during the Gala Dinner.

10

Program at a Glance

11

Floor Plans

IPG Campus overview

B1 – Registration, plenary sessions and exhibitors B2 – Parallel sessions B3 – IPG Restaurant

Ground Floor – Registration, plenary sessions and exhibitors (B1)

1st Floor – Parallel sessions (B2)

12

Keynote Sessions

Methods to Evaluate the Quality of Stator and Rotor of Electric Motors

Sebastião Lauro Nau

WEG - Manager of Research and Technological Innovation

Abstract

This paper describes some innovative methods for evaluating the design quality and the actual

condition of an electric motor. Some techniques discussed below were developed inside the

company with the aim of increasing the reliability in the assessment of the stator and/or the

rotor of a squirrel cage motor. The methods discussed for stator evaluation involve the

measurement of iron losses and the realization of accelerated ageing tests, concerning the

quality in the design stage of an electric motor. The methods discussed for rotor evaluation

involve procedures to check the continuity of the bars and short circuit rings, concerning the

quality in the manufacturing stage and allowing assessments of the actual condition of the

machine in the field.

Short Biography

Sebastião Lauro Nau received his Engineer, M. Sc. and Doctor degrees from the

Universidade Federal de Santa Catarina, Florianópolis, Brazil, in 1985, 2000 and

2007, respectively. He is currently Manager of Research and Technological

Innovation at WEG Equipamentos Elétricos S.A., Jaraguá do Sul, Brazil, and a

Professor at the Department of Electrical Engineering, Centro Universitário -

Católica de Santa Catarina, Jaraguá do Sul, Brazil. His work and research topics are induction

machines, magnetic noise, synchronous motor with permanent magnets and application of

motors with frequency inverters.

13

Large Rotating Machines Monitoring and Condition Assessment

Miguel Simas

EDP - Power Generation Company, Maintenance Manager

Abstract

Nowadays, a greater and greater operation flexibility and reliability of the electrical rotating

machines is required, especially in the electrical generation process with thermal origin, due to

the surplus energy capacity and the market change for renewable energy. On the other hand,

the design and manufacturing of new electrical rotating machines has to face an increasingly

competitive market where the cost reduction is a must, with an impact on reliability. In order to

meet the challenges of flexibility imposed by the market, while ensuring the best reliability of

these machines, this paper covers the monitoring strategy, condition assessment and corrective

measures adopted for the critical electrical rotating machines fleet of EDP Produção – a EDP

Group Company. In this context, “on-line” and “off-line monitoring” and “condition assessment”

techniques of turbine generators and electrical motors will be described, as well as the result

interpretation and some case studies.

Short Biography

Miguel Simas is a Maintenance Manager in the Power Generation Company, part

of EDP Group, with a large experience in the field of Fossil Power Plants. EDP

Produção covers the activities of conception, project, management, installation of

site supervision, commissioning and operation & maintenance. Miguel’s recent

works include Overalls Management and Commissioning (with dynamic balancing)

of Turbines, Generators, and their auxiliary Equipment in Fossil Power Plants. His work

experience also includes Operation and Maintenance of Rotating Machines for over 25 years.

14

Program

September 1st, 2015

Welcome Reception, Guarda’s Paço da Cultura (18h30-20h30)

September 2nd, 2015

Opening Ceremony, Auditorium (9h00-10h00)

KEYNOTE 1 AUDITORIUM (10h00-10h45)

Session Chair: Antonio J. Marques Cardoso, University of Beira Interior / CISE, Portugal

#621 "Methods to Evaluate the Quality of Stator and Rotor of Electric Motors"

Sebastião Lauro Nau, WEG Equipamentos Elétricos S.A., Brazil Daniel Schmitz, WEG Equipamentos Elétricos S.A., Brazil Waldiberto de Lima Pires, WEG Equipamentos Elétricos S.A., Brazil

Coffee Break (10h45-11h15)

SESSION 1 AUDITORIUM (11h15-13h00)

Memorial Session (Dr. Ernesto Wiedenbrug)

Session Chairs: Gérard-André Capolino, University of Picardie "Jules Verne", France Sang Bin Lee, Korea University, Korea

#590 "Reliable Detection of Induction Motor Rotor Faults under the Influence of Rotor Core Magnetic Anisotropy"

Jose A. Antonino-Daviu, University of Valencia, Spain Joan Pons Llinares, University of Valencia, Spain Sungsik Shin, Korea University, Korea Kun Wang Lee, Korea University, Korea Sang Bin Lee, Korea University, Korea

#620 "Reliable Detection of Rotor Faults Under the Influence of Low Frequency Load Torque Oscillations for Applications with Speed Reduction Couplings"

Heonyoung Kim, Korea University, Korea Sang Bin Lee, Korea University, Korea Sung Bong Park, MND Technology, Korea

15

Shahin Hedayati Kia, University of Picardie "Jules Verne", France Gérard-André Capolino, University of Picardie "Jules Verne", France

#742 "Comparative Experimental Investigation of the Broken Bar Fault Detectability in Induction Motors"

Konstantinos N. Gyftakis, University of Oxford, UK Jose A. Antonino-Daviu, University of Valencia, Spain Raul Garcia-Hernandez, University of Valencia, Spain Malcom McCulloch, University of Oxford, UK David A Howey, University of Oxford, UK Antonio J. Marques Cardoso, University of Beira Interior / CISE, Portugal

#743 "A New Reliable Fault Index for Rotor Dissymmetry Detection in Wound-Rotor Induction Machine"

Yasser Gritli, Bologna University, Italy Claudio Rossi, Bologna University, Italy Domenico Casadei, Bologna University, Italy Fiorenzo Filippetti, Bologna University, Italy Alberto Bellini, Bologna University, Italy Gérard-André Capolino, University of Picardie "Jules Verne", France

#683 "Evaluation and Current-Response Based Identification of Insulation Degradation for High Utilized Electrical Machines in Railway Application"

Clemens Zöller, Vienna University of Technology, Austria Markus Vogelsberger, Bombardier Transportation, Austria Robert Fasching, Isovolta AG, Austria Werner Grubelnik, Isovolta AG, Austria Thomas Wolbank, Vienna University of Technology, Austria

Lunch (13h00-14h00)

SESSION 2 AUDITORIUM (14h00-16h00)

Rotor Faults I

Session Chairs: Tadeusz Sobczyk, Cracow University of Technology, Poland Thomas Wolbank, Vienna University of Technology, Austria

#617 "Induction Motor Rotor Bar Damage Evaluation with Magnetic Field Analysis"

Scott Clark, Brandon and Clark, Inc., USA Daniel Stevens, Brandon and Clark, Inc., USA

#618 "Influence on Rotor Broken Bar Fault Diagnosis of Mechanical Torque Pulsations by Means of FFT"

Alejandro J. Fernández Gómez, Cracow University of Technology, Poland Tadeusz J. Sobczyk, Cracow University of Technology, Poland

16

Konrad Weinreb, Cracow University of Technology, Poland

#669 "Fault Detection in Inverter-Fed Induction Motors in Transient Regime: State of the Art"

Vanessa Fernández-Cavero, University of Valladolid, Spain Daniel Morinigo-Sotelo, University of Valladolid, Spain Oscar Duque-Perez, University of Valladolid, Spain Joan Pons Llinares, Polytechnic University of Valencia, Spain

#705 "Harmonic Order Tracking Analysis: A Speed-Sensorless Method for Condition Monitoring of Wound Rotor Induction Generators in Wind Turbines"

Angel Sapena-Bañó, Polytechnic University of Valencia, Spain Martín Riera-Guasp, Polytechnic University of Valencia, Spain Rubén Puche-Panadero, Polytechnic University of Valencia, Spain Javier Martinez-Roman, Polytechnic University of Valencia, Spain Juan Perez-Cruz, Polytechnic University of Valencia, Spain Jose Roger-Folch, Polytechnic University of Valencia, Spain Manuel Pineda-Sanchez, Polytechnic University of Valencia, Spain

#739 "The Use of the Modified Prony’s Method for Rotor Speed Estimation in Squirrel Cage Induction Motors"

Mohamed Sahraoui, University of Biskra, Algeria / CISE, Portugal Antonio J. Marques Cardoso, University of Beira Interior / CISE, Portugal Khaled Yahia, University of Biskra, Algeria / CISE, Portugal Adel Ghoggal, University of Biskra, Algeria

#603 "A Current Product Signal Analysis Method for Rotor Fault Diagnosis in Induction Motors"

Zhaowen Hou, Zhejiang University, China Jin Huang, He Liu, Zhejiang University, China Tong Wang, Zhejiang University, China Lihang Zhao, Zhejiang University, China

Coffee Break (16h00-16h30)

SESSION 3A ROOM PARK (16h30-17h50)

SS2 - Statistical Signal Processing and Statistical Tools for Condition-Based Maintenance of Induction Machine Based Electromechanical Systems

Session Chairs: Jose A. Antonino-Daviu, Polytechnic University of Valencia, Spain Shahin Hedayati Kia, University of Picardie "Jules Verne", France

#638 "Discrete Wavelet Transform for Stator Fault Detection in induction Motors"

Ridha Kechida, University of El Oued, Algeria Arezki Menacer, University of Biskra, Algeria Hicham Talhaoui, University of Bordj Bou Arreridj, Algeria

17

Hakima Cherif, University of El Oued, Algeria

#664 "Variable Importance Assessment in Lifespan Models of Insulation Materials: A Comparative Study"

Farah Salameh, University of Toulouse / LAPLACE, France Antoine Picot, University of Toulouse / LAPLACE, France Marie Chabert, University of Toulouse / IRIT, France Eve Leconte, University of Toulouse 1 Capitole, France Anne Ruiz-Gazen, University of Toulouse 1 Capitole, France Pascal Maussion, University of Toulouse / LAPLACE, France

#701 "Induction Motor Bearings Diagnostic Using MCSA and Normalized Tripple Covariance"

Tomasz Ciszewski, Gdansk University of Technology, Poland Leon Swędrowski, Gdansk University of Technology, Poland Len Gelman, Cranfield University, UK

#748 "Fault Index Statistical Study for Gear Fault Detection Using Stator Current Space Vector Analysis"

Shahin Hedayati Kia, University of Picardie "Jules Verne", France Humberto Henao, University of Picardie "Jules Verne", France Gérard-André Capolino, University of Picardie "Jules Verne", France

SESSION 3B ROOM TESLA (16h30-17h50)

Synchronous Machines

Session Chairs: Elias Strangas, Michigan State University, USA Adérito N. Alcaso, Polytechnic Institute of Guarda / CISE, Portugal

#619 "Enhancement of a High Speed De-Excitation System for Brushless Synchronous Machines by Large Blocking Voltage Semiconductors"

Carlos A. Platero, Technical University of Madrid, Spain Francisco Blázquez, Technical University of Madrid, Spain Emilio Rebollo, Technical University of Madrid, Spain Francisco R. Blánquez, CERN, Switzerland Jose A. Martinez, ALSTOM Renovables España, Spain Marta Redondo, ENDESA Generación SA, Spain

#643 "Determination of the Inductances of a Salient-Pole Synchronous Machine without Damper Winding Based on the Voltage Equation of a Single Coil in the Stator Winding"

Onur Misir, Leibniz University of Hannover, Germany Bernd Ponick, University of Hannover, Germany

#680 "Field Current Signature Analysis for Fault Detection in Synchronous Motors"

Pedro V. J. Rodriguez, ABB CRC, Sweden Subrat Sahoo, ABB CRC, Sweden Cajetan T. Pinto, ABB CRC, Sweden

18

Maciej Sulowicz, Cracow University of Technology, Poland

#731 "Development of a Reduced-Model Laboratory for Testing Predictive Fault System in Internal Combustion Engines"

Phillip Mendonça, SUAPE II Energy, Brazil Erik Leandro Bonaldi, Gnarus Institute, Brazil Levy E. L. de Oliveira, Gnarus Institute, Brazil Germano Lambert-Torres, PS Solutions / Gnarus Institute, Brazil Jonas G. Borges da Silva, Gnarus Institute, Brazil Luiz Eduardo Borges da Silva, Itajuba Federal University, Brazil Camila P. Salomon, Itajuba Federal University, Brazil Wilson Cesar Santana, Itajuba Federal University, Brazil

Guarda Tour (17h50-19h50)

19

September 3rd, 2015

KEYNOTE 2 AUDITORIUM (9h00-9h45)

Session Chair: Antonio J. Marques Cardoso, University of Beira Interior / CISE, Portugal

"Large Rotating Machines Monitoring and Condition Assessment"

Miguel Simas, EDP - Power Generation Company, Portugal

SESSION 4 AUDITORIUM (9h45-10h45)

Power Electronics

Session Chairs: Sejir Khojet El Khil, University of Tunis El Manar, Tunisia / CISE, Portugal Eunice F. F. Ribeiro, CISE, Portugal

#624 "Fault Detection for SiC-Mosfet based on the Behavior of Gate Signal"

Ogilvie Climaco-Arvizu, National Polytechnic Institute, Mexico Leobardo Hernández-González, National Polytechnic Institute, Mexico Marco Antonio Rodríguez-Blanco, Autonomous University of Carmen City, Mexico

#720 "Power-Switch and Current-Sensor Fault-Tolerant Control of PMSG Drives for Wind Turbine Systems"

Imed Jlassi, University of Tunis El Manar, Tunisia / CISE, Portugal Sejir Khojet El Khil, University of Tunis El Manar, Tunisia / CISE, Portugal Najiba Mrabet Bellaaj, University of Tunis El Manar, Tunisia

Coffee Break (10h45-11h15)

SESSION 5A ROOM PARK (11h15-13h00)

Permanent Magnet Synchronous Machines

Session Chairs: Jawad Faiz, University of Tehran, Iran Jorge O. Estima, University of Beira Interior / CISE, Portugal

#645 "Design and Construction of a Laboratory Bench System for the Teaching and Training of Engineers on Diagnostics of Permanent Magnet Motors"

Francisco Blázquez, Technical University of Madrid, Spain Emilio Rebollo, Technical University of Madrid, Spain Carlos A. Platero, Technical University of Madrid, Spain Francisco R. Blánquez, CERN, Switzerland

20

#734 "Comprehensive Analysis and Evaluation of Cogging Torque in Axial Flux Permanent Magnet Machines"

Ângela P. Ferreira, Polytechnic Institute of Bragança / CISE, Portugal Vicente Leite, Polytechnic Institute of Bragança / CISE, Portugal Artur Costa, University of Porto, Portugal

#752 "Detection of Magnet Demagnetization and High Resistance Connections in Five-Phase Surface-Mounted Permanent Magnet Generators"

Angelo Tani, University of Bologna, Italy Yasser Gritli, University of Bologna, Italy Michele Mengoni, University of Bologna, Italy Luca Zarri, University of Bologna, Italy Giacomo Sala, University of Bologna, Italy Alberto Bellini, University of Bologna, Italy Giovanni Serra, University of Bologna, Italy

#688 "Detection of Static Eccentricity and Turn-to-turn Short Circuit Faults in Permanent Magnet Synchronous AC Machines"

Reemon Haddad, Michigan State University, USA Elias Strangas, Michigan State University, USA

#698 "A New Approach to Detect Stator Fault in Permanent Magnet Synchronous Motors

Ferhat Çira, Dicle University, Turkey Müslüm Arkan, Inonu University, Turkey Bilal Gümüs, Dicle University, Turkey

SESSION 5B ROOM TESLA (11h15-13h00)

Rotor Faults II

Session Chairs: Martín Riera-Guasp, Polytechnic University of Valencia, Spain Konstantinos N. Gyftakis, University of Oxford, UK

#635 "Mixed Eccentricity Fault Diagnosis in the Sensorless Field Oriented Control Induction Motor Using DWT Technique"

Hicham Talhaoui, University of Bordj Bou Arreridj, Algeria Arezki Menacer, University of Biskra, Algeria Ridha Kechida, University of Eloued, Algeria

#735 "The Use of a Modified Prony’s Method to Detect the Airgap-Eccentricity Occurrence in Induction Motors"

Khaled Yahia, University of Biskra, Algeria / CISE, Portugal Mohamed Sahraoui, University of Biskra, Algeria / CISE, Portugal Antonio. J. M Cardoso, University of Beira Interior / CISE, Portugal Adel Ghoggal, University of Biskra, Algeria

21

#627 "An Algorithm Determining Stationary Electromechanical Interactions in Faulty AC Machines"

Tadeusz J. Sobczyk, Cracow University of Technology, Poland Michał Walas, Cracow University of Technology, Poland

#699 "Misalignment Fault Detection and Diagnosis using AR Model of Torque Signal"

Smail Haroun, USTHB, Algeria Amirouche N. Seghir, USTHB, Algeria Said Touati, Nuclear Research Center of Birine, Algeria Samir Hamdani, USTHB, Algeria

Lunch (13h00-14h00)

SESSION 6A ROOM PARK (14h00-16h00)

SS1 - FEM-Based Studies for Electrical Machines' Condition Monitoring and Fault Diagnosis

Session Chairs: Konstantinos N. Gyftakis, University of Oxford, UK Anouar Belahcen, Aalto University, Finland

#589 "Thorough Investigation of the Third Current Harmonic in Delta-Connected Induction Motors Suffering from a Stator Inter-Turn Faults"

Konstantinos N. Gyftakis, University of Oxford, UK M'hamed Drif, USTO-MB, Algeria / CISE, Portugal Antonio J. M. Cardoso, University of Beira Interior / CISE, Portugal

#655 "Predictive Monitoring of Turn-to-Turn Insulation in Single Tooth Coils"

Zhe Huang, Volvo Group / Lund University, Sweden Avo Reinap, Lund University, Sweden Mats Alaküla, Volvo Powertrain / Lund University, Sweden

#689 "Static, Dynamic and Mixed Eccentricity of Induction Motor"

Abdullah Polat, Istanbul Technical University, Turkey Yasemin D. Ertugrul, Istanbul Technical University, Turkey Lale T. Ergene, Istanbul Technical University, Turkey

#709 "Detection and Severity Estimation of Static and Dynamic Eccentricity in Induction Motors using Finite Element Analysis"

Jayaram Subramanian, University of Victoria, Canada Subhasis Nandi, University of Victoria, Canada T. Ilamparithi, University of Victoria, Canada

#713 "Diagnosis of Rotor Faults in Three-Phase Induction Motors Under Time-Varying Loads"

Abd Elhamid Mabrouk, University of Biskra, Algeria

22

Salah Eddine Zouzou, University of Biskra, Algeria

#714 "Necessity for Implementation of Inverse Problem Theory in Electric Machine Fault Diagnosis"

Toomas Vaimann, Tallinn University of Technology, Estonia / Aalto Univ., Finland Anouar Belahcen, Tallinn University of Technology, Estonia / Aalto University, Finland Ants Kallaste, Tallinn University of Technology, Estonia

SESSION 6B ROOM TESLA (14h00-16h00)

Bearings

Session Chairs: Chiara Boccaletti, Sapienza University of Rome, Italy / CISE, Portugal Houda Ben Attia Sethom, University of Tunis El Manar, Tunisia

#694 "Detection of Generator Bearing Inner Race Creep by Means of Vibration and Temperature Analysis"

Georgios A. Skrimpas, Brüel and Kjær Vibro / Technical Univ. of Denmark, Denmark Ivaylo Dragiev, Brüel and Kjær Vibro, Denmark Reynir Hilmission, Brüel and Kjær Vibro, Denmark Christian Sweeney, Brüel and Kjær Vibro, Denmark Bogi Bech Jensen, University of the Faroe Islands, Faroe Islands Nenad Mijatovic, Technical University of Denmark, Denmark Joachim Holbøll, Technical University of Denmark, Denmark

#679 "A New Diagnostic Instrument to Detect Generalized Roughness in Rolling Bearings for Induction Motors"

Lucia Frosini, University of Pavia, Italy Marco Magnaghi, University of Pavia, Italy Andrea Albini, University of Pavia, Italy Giovanni Magrotti, University of Pavia, Italy

#696 "A Signal Processing Approach to a Bearing Fault Detection with the Use of a Mobile Phone"

Pawel Rzeszucinski, ABB CRC, Poland Maciej Orman, ABB CRC, China Cajetan T. Pinto, ABB Machine Service, India Agnieszka Tkaczyk, ABB CRC, Poland Maciej Sulowicz, Cracow Technical University, Poland

#693 "Bearing Damage Diagnosis by Means of the Linear Discriminant Analysis of Stator Current Feature"

Christelle Piantsop Mbo'o, Aachen University, Germany Kay Hameyer, Aachen University, Germany

#649 "Calculation of Induction Machines Inductances under Outer Raceway Defect"

Noureddine Bessous, El-Oued University, Algeria

23

Salah Eddine Zouzou, University of Biskra, Algeria Noura Halem, University of Biskra, Algeria

#681 "Diagnostic Signal Analysis Using Distribution of Frequency Gaps between Spectral Peaks"

Michal Orkisz, ABB CRC, Poland James Ottewill, ABB CRC, Poland

Coffee Break (16h00-16h30)

SESSION 7A ROOM PARK (16h30-17h50)

Power Transformers

Session Chairs: Germano Lambert-Torres, PS Solutions, Brazil Luís M. R. Oliveira, University of Algarve / CISE, Portugal

#692 " Comparing Power Transformer Turn-to-Turn Faults Protection Methods: Negative Sequence Component Versus Space Vector Algorithms "

Luís M. R. Oliveira, University of Algarve / CISE, Portugal Antonio J. Marques Cardoso, University of Beira Interior / CISE, Portugal

#588 "A Mathematical Contribution to the Analysis of Moisture Migration in Power Transformer Oil-Paper Insulation Systems"

André Pereira Marques, Federal Institute of Goiás / CELG Distribuição, Brazil Felipe R. C. Sousa, Federal Institute of Goiás, Brazil Leonardo da Cunha Brito, Federal Institute of Goiás, Brazil Cacilda de Jesus Ribeiro, Federal Institute of Goiás, Brazil Cláudio H. Bezerra Azevedo, CELG Distribuição, Brazil José A. Lopes dos Santos, CELG Distribuição, Brazil

#626 "Power Transformer Noise Active Control Based on Genetic Radial Basis Wavelet Neural Network"

Hongzhong Ma, Hohai University, China Hongyu Jiang, Huaian Power Supply Company, China Ping Ju, Hohai University, China Zhenfei Chen, Hohai University, China Ning Jiang, Nanjing Power Company, China Chunning Wang, Nanjing Power Company, China

#727 "Expert System for Engineering Assets’ Management of Utility Companies"

Alexandra Khalyasmaa, Ural Federal University, Russia Stepan Dmitriev, Ural Federal University, Russia

24

SESSION 7B ROOM TESLA (16h30-17h50)

Stator Faults

Session Chairs: Pedro V. J. Rodriguez, ABB CRC, Sweden Davide S. B. Fonseca, University of Beira Interior / CISE, Portugal

#648 "A Novel Method for Induction Motors Stator Inter-Turn Short Circuit Fault Diagnosis based on Wavelet Energy and Neural Network"

Besma Bessam, University of Biskra, Algeria Arezki Menacer, University of Biskra, Algeria Mohamed Boumehraz, University of Biskra, Algeria Hakima Cherif, University of El Oued, Algeria

#646 "Stator Inter Turn Fault Detection Using Discrete Wavelet Transform"

Hakima Cherif, University of El Oued, Algeria Arezki Menacer, University of Biskra, Algeria Besma Bessam, University of Biskra, Algeria Ridha Kechida, University of El Oued, Algeria

#654 "Stator Fault Detection of Doubly-Fed Induction Generators Using Rotor Instantaneous Power Spectrum"

Hongzhong Ma, Hohai University, China Zhengdong Zhang, Jiangsu Electric Power Company, China Ping Ju, Hohai University, China Weijun Shi, Jiangsu Electric Power Company, China Chunning Wang, Nanjing Power Company, China

#672 "Flux-linkage Performance of DFIG Under Different Types of Faults and Locations"

Mohamed M. M. Sedky, University of Alexandria, Egypt

Gala Dinner, Hotel Lusitânia (19h00-23h00)

25

September 4th, 2015

SESSION 8A ROOM PARK (9h00-10h45)

Materials for Electrical Machines

Session Chairs: Sebastião Lauro Nau, WEG Equipamentos Elétricos S.A., Brazil M'hamed Drif, USTO-MB, Algeria / CISE, Portugal

#663 "Diagnostics of Insulation Systems by Means of Partial Discharges"

Alfredo Contin, University of Trieste, Italy

#673 "Effects of Thermo-Electrical Aging on the Properties of Epoxy-Based Nanocomposites for Motor Insulation"

Biagio De Vivo, University of Salerno, Italy Patrizia Lamberti, University of Salerno, Italy Raffaele Raimo, University of Salerno, Italy Vincenzo Tucci, University of Salerno, Italy Luigi Vertuccio, University of Salerno, Italy Luigi Beneduce, AnsaldoBreda, Italy

#678 "The Impact of Thermal Degradation on Electrical Machine Winding Insulation"

Malgorzata Sumislawska, Coventry University, UK Konstantinos N. Gyftakis, University of Oxford, UK Darren F. Kavanagh, Institute of Technology Carlow, Ireland Malcolm McCulloch, University of Oxford, UK Keith J. -Burnham, Coventry University, UK David A. Howey, University of Oxford, UK

#686 "Mechanical Cutting Influence on the Energy Losses in Non Oriented Silicon Iron Steels"

Veronica Manescu Paltanea, Politehnica University from Bucharest, Romania Gheorghe Paltanea, Politehnica University from Bucharest, Romania Horia Gavrila, Politehnica University from Bucharest, Romania

SESSION 8B ROOM TESLA (9h00-10h45)

SS3 - Fault Monitoring and Diagnosis of Inverter-Fed Electrical Motors

Session Chairs: René De Jesús Romero-Troncoso, University of Guanajuato, Mexico Daniel Morinigo-Sotelo, University of Valladolid, Spain

#613 "Inverter-fed Induction Motors with Broken Rotor Bars: Different Supply Modes and Their Effects on Fault Diagnosis Process"

Vahid Ghorbanian, McGill University, Canada Jawad Faiz, University of Tehran, Iran Bashir M. Ebrahimi, University of Tehran, Iran

26

Bilal Akin, University of Texas, USA

#656 "Application of Artificial Neural Networks and PCA for Fault Diagnosis in Inverter-Fed Induction Motors"

Wagner F. Godoy, University of São Paulo, Brazil Ivan N. Da Silva, University of São Paulo, Brazil Alessandro Goedtel, Federal University of Technology - Paraná, Brazil Rodrigo H. C. Palácios, University of São Paulo, Brazil Tiago D. Lopes, Federal University of Technology - Paraná, Brazil

#682 "Effects of Transmission Belt Looseness on Electrical and Mechanical Measurements of an Induction Motor"

Etienne Fournier, Leroy Somer / University of Toulouse, France Antoine Picot, University of Toulouse / LAPLACE, France Jérémi Régnier, University of Toulouse, France Christian Andrieux, Leroy Somer, France Jacques Saint-Michel, Leroy Somer, France Pascal Maussion, University of Toulouse / LAPLACE, France

#700 "Control of Five-Phase Induction Motor Under Open-Circuit Phase Fault fed by Fault Tolerant VSI"

Mahmoud I. Masoud, Sultan Qaboos University, Oman / Alexandria University, Egypt Sherif M. Dabour, Tanta University, Egypt Abd El-Wahab Hassan, Tanta University, Egypt Essam M. Rashad, Tanta University, Egypt

#716 "Study of a Fault Tolerant Induction Motor Drive Based on Material Redundancy"

Marco Antonio Rodríguez-Blanco, Autonomous University of Carmen, Mexico Victor Golikov, Autonomous University of Carmen, Mexico Leobardo Hernández-González, National Polytechnic Institute, Mexico Francisco Méndez-Martínez, Autonomous University of Carmen, Mexico

Coffee Break (10h45-11h15)

SESSION 9 AUDITORIUM (11h15-13h00)

Synchronous Reluctance Machines

Session Chairs: Jochen Schaab, KSB Aktiengesellschaft, Germany Jorge O. Estima, University of Beira Interior / CISE, Portugal

#642 "Advanced Diagnosis Strategy for Incipient Stator Faults in Synchronous Reluctance Motor"

Ilhem Bouchareb, Polytechnical University of Constantine, Algeria Amar Bentounsi, Polytechnical University of Constantine, Algeria Abdesselam Lebaroud, University of Skikda, Algeria

27

#702 "Constrained-Size Torque Maximization in SynRM Machines by Means of Genetic Algorithms"

Carlos López Torres, Polytechnic University of Catalonia, Spain Enric Sala, Polytechnic University of Catalonia, Spain Antoni Garcia Espinosa, Polytechnic University of Catalonia, Spain Luis Romeral, Polytechnic University of Catalonia, Spain

#703 "Steady-State Analysis and Stability of Synchronous Reluctance Motors Considering Saturation Effects"

Mohamed N. Ibrahim, Ghent University, Belgium / Kafrelshiekh University, Egypt Essam M. Rashad, Tanta University, Egypt Peter Sergeant, Ghent University, Belgium

#737 "Performance Evaluation of Synchronous Reluctance Motor Drives Under Inverter Fault Conditions"

Diogo M. B. Matos, University of Beira Interior / CISE, Portugal Jorge O. Estima, University of Beira Interior / CISE, Portugal Antonio J. Marques Cardoso, University of Beira Interior / CISE, Portugal

#715 "State Estimation and Process Optimisation for Multipump Systems with Synchronous Reluctance Motors"

Boris Janjic, KSB Aktiengesellschaft, Germany Stefan Laue, KSB Aktiengesellschaft, Germany Jochen Schaab, KSB Aktiengesellschaft, Germany

Lunch (13h00-14h00)

SESSION 10 AUDITORIUM (14h00-16h00)

SS5 - New Approaches for Multi-Fault Diagnosis Scenarios Based on Artificial Intelligent Techniques

Session Chairs: Juan Antonio Ortega, Polytechnic University of Catalonia, Spain Antoine Picot, University of Toulouse / LAPLACE, France

#634 "An Effective Encoder Fault Detection in PMSM Drives at Different Speed Ranges"

Manef Bourogaoui, University of Tunis El Manar, Tunisia Imed Jlassi, University of Tunis El Manar, Tunisia / CISE, Portugal Sejir Khojet El Khil, University of Tunis El Manar, Tunisia / CISE, Portugal Houda Ben Attia Sethom, University of Tunis El Manar, Tunisia

#644 "Diagnosis Method Based on Topology Codification and Neural Network Applied to an Industrial Camshaft"

Daniel Zurita, Polytechnic University of Catalonia, Spain Jesús A. Cariño, Polytechnic University of Catalonia, Spain Antoine Picot, University of Toulouse / LAPLACE, France

28

Miguel Delgado, Polytechnic University of Catalonia, Spain Juan Antonio Ortega, Polytechnic University of Catalonia, Spain

#652 "Industrial Machinery Diagnosis by means of Normalized Time-Frequency Maps"

Antoine Picot, University of Toulouse / LAPLACE, France Daniel Zurita, Polytechnic University of Catalonia, Spain Jesús A. Cariño, Polytechnic University of Catalonia, Spain Etienne Fournier, Leroy Somer / University of Toulouse, France Jérémi Régnier, University of Toulouse / LAPLACE, France Juan Antonio Ortega, Polytechnic University of Catalonia, Spain

#658 "Novelty Detection Methodology based on Multi-Modal One-class Support Vector Machine"

Jesús A. Cariño, Polytechnic University of Catalonia, Spain Daniel Zurita, Polytechnic University of Catalonia, Spain Antoine Picot, University of Toulouse / LAPLACE, France Miguel Delgado, Polytechnic University of Catalonia, Spain Juan Antonio Ortega, Polytechnic University of Catalonia, Spain René De Jesús Romero-Troncoso, University of Guanajuato, Mexico

#671 "Enhanced Time Series Forecasting by Means of Dynamics Boosting for Industrial Process Monitoring"

Daniel Zurita, Polytechnic University of Catalonia, Spain Enric Sala, Polytechnic University of Catalonia, Spain Jesús A. Cariño, Polytechnic University of Catalonia, Spain Miguel Delgado, Polytechnic University of Catalonia, Spain Juan Antonio Ortega, Polytechnic University of Catalonia, Spain

#708 "Supervised Diagnosis of Induction Motor Faults: A Proposed Methodology for an Improved Performance Evaluation"

Ignacio Martín-Díaz, University of Valladolid, Spain Oscar Duque-Perez, University of Valladolid, Spain René De Jesús Romero-Troncoso, University of Guanajuato, Mexico Daniel Morinigo-Sotelo, University of Valladolid, Spain

Coffee Break (16h00-16h30)

SESSION 11 AUDITORIUM (16h30-18h50)

SS4 - Distributed Generation Systems and Microgrids

Session Chairs: Mehdi Savaghebi, Aalborg University, Denmark Ângela Ferreira, Polytechnic Institute of Bragança / CISE, Portugal

#601 "Leakage Current Suppression with A Novel Six-Switch Photovoltaic Grid-Connected Inverter"

Baoze Wei, Aalborg University, Denmark

29

Xiaoqiang Guo, Yanshan University, China Josep M. Guerrero, Aalborg University, Denmark Mehdi Savaghebi, Aalborg University, Denmark

#722 "Active Damping Techniques for LCL-Filtered Inverters-Based Microgrids"

Iman Lorzadeh, Amirkabir University of Technology, Iran Mehdi Savaghebi, Aalborg University, Denmark Hossein Askarian Abyaneh, Amirkabir University of Technology, Iran Josep. M Guerrero, Aalborg University, Denmark

#723 "Hierarchical Control for Voltage Harmonic Compensation in Multi-Area Microgrids"

Mohammad M. Hashempour, Islamic Azad University, Iran Mehdi Savaghebi, Aalborg University, Denmark Juan C. Vasquez, Aalborg University, Denmark Josep. M Guerrero, Aalborg University, Denmark

#754 "Optimal Tilt Angle and Orientation for Solar Collectors in Iran"

Farnaz Safdarian, Amirkabir University of Technology, Iran Mohammad E. Nazari, Amirkabir University of Technology, Iran

#755 "Open UPQC Power Quality Manager within Distributed Generation Systems"

Gabriele D’Antona, Polytechnic University of Milan, Italy Davide Della Giustina, A2A Reti Elettriche Spa, Italy Roberto Faranda, Polytechnic University of Milan, Italy Hossein Hafezi, Polytechnic University of Milan, Italy

#760 "Active Power Regulation based on Droop for AC Microgrid"

Chendan Li, Aalborg University, Denmark Ernane A. A. Coelho, Federal University of Uberlândia, Brazil Mehdi Savaghebi, Aalborg University, Denmark Juan C. Vasquez, Aalborg University, Denmark Josep M. Guerrero, Aalborg University, Denmark

#747 "Control of Multi-Functional Inverter for Grid Integration of PV and Battery Energy Storage System"

Seyyed Y. Mousazadeh, Iran University of Science and Technology, Iran Mehdi Savaghebi, Aalborg University, Denmark Amin Beirami, Iran University of Science and Technology, Iran Alireza Jalilian, Iran University of Science and Technology, Iran Josep M. Guerrero, Aalborg University, Denmark Chendan Li, Aalborg University, Denmark

30

Technical Committee Meetings

SDEMPED 2015 International Steering Committee

The SDEMPED 2015 International Steering Committee meeting is scheduled for Thursday,

September 3, from 13h00 till 14h30.

IEEE-IES/PETC Subcommittee on Fault Diagnosis and Fault Tolerance

The IEEE-IES/PETC Subcommittee on Fault Diagnosis and Fault Tolerance meeting is scheduled

for Thursday, September 3, from 10h25 till 11h15, at the Auditorium.

SDEMPED Awards

SDEMPED Best Paper Award

The SDEMPED Best Paper Award is presented biennially for up to three technical papers (in no

order), for outstanding technical competence displayed in a paper presented at the current

SDEMPED edition.

2015 Diagnostics Achievement Award

This award was established to honor innovators who contributed to the technical areas of the

SDEMPED committee. The award is to be presented biennially to an individual, for outstanding

sustained technical contributions and services in the field of monitoring and diagnostics for

electrical machines, power electronics, and drives.

These awards will be presented at the Gala Dinner.

31

List of Contributors

A

Abyaneh, Hossein 29

Akin, Bilal 26

Alaküla, Mats 21

Albini, Andrea 22

Andrieux, Christian 26

Antonino-Daviu , Jose 14, 15, 16

Arkan, Müslüm 20

Azevedo, Cláudio Henrique 23

B

Belahcen, Anouar 21, 22

Bellaa, Najiba 19

Bellini, Alberto 15, 20

Beneduce, Luigi 25

Bentounsi, A. 26

Bessam, Besma 24

Bessous, Noureddine 23

Beirami, Amin 29

Blánquez, Francisco R. 17, 19

Blázquez, Francisco 17, 19

Bonaldi, Erik 18

Bouchareb, Ilhem 26

Boumehraz, Mohamed 24

Bourogaoui, Manef 27

Brito, Leonardo 23

C

Capolino, Gérard-André 14, 15, 17

Cariño, Jesús A. 27, 28

Casadei , Domenico 15

Chabert, Marie 17

Chen, Zhenfei 23

Cherif, Hakima 17, 24

Çira, Ferhat 20

Ciszewski, Tomasz 17

Clark, Scott 15

Climaco-Arvizu, Ogilvie 19

Coelho, Ernane 29

Contin, Alfredo 25

Costa, Artur 20

D

D’Antona, Gabriele 29

Dabour, Sherif 26

Da Silva, Ivan 26

Da Silva, Jonas 18

Da Silva, Luiz Borges 18

Delgado, Miguel 28

Dmitriev, Stepan 24

Dos Santos, José 23

Dragiev, Ivaylo 22

Drif, M'hamed 21, 25

Duque-Perez, Oscar 16, 28

E

Ebrahimi, B. M. 25

Ergene, Lale 21

Ertugrul, Yasemin 21

Espinosa, Antoni Garcia 27

Estima, Jorge 19, 26, 27

F

Faiz, Jawad 19, 25

Faranda, Roberto 29

Fasching, Robert 15

Fernández-Cavero, Vanessa 16

Ferreira , Ângela 20, 28

Filippetti, Fiorenzo 15

Fournier, Etienne 26, 28

Frosini, Lucia 22

G

Garcia-Hernandez, Raul 15

Gavrila, Horia 25

Gelman , Len 17

Ghoggal, Adel 16, 20

Ghorbanian, Vahid 25

Giustina, Davide Della 29

Godoy, Wagner 26

Goedtel, Alessandro 26

Golikov, Victor 26

Gómez, Alejandro 15

32

Gritli, Yasser 15, 20

Grubelnik, Werner 15

Guerrero, Josep 29

Gümüs, Bilal 20

Guo, Xiaoqiang 29

Gyftakis, Konstantinos 15, 20, 21, 25

H

Haddad , Reemon 20

Hafezi, Hossein 29

Halem, Noura 23

Hamdani, Samir 21

Hameyer, Kay 23

Haroun, Smail 21

Hashempour, Mohammad 29

Hassan, Abd El-Wahab 26

Henao, Humberto 17

Hernández-González, Leobardo 19, 26

Hilmission, Reynir 22

Holbøll, Joachim 22

Hou, Zhaowen 16

Howey, David 15, 25

Huang, Jin 16

Huang, Zhe 21

I

Ibrahim, Mohamed 27

Ilamparithi, T. 21

J

J.-Burnham, Keith 25

Jalilian, Alireza 29

Janjic, Boris 27

Jensen, Bogi Bech 22

Jiang, Hongyu 23

Jiang, Ning 23

Jlassi, Imed 19, 27

Ju, Ping 23, 24

K

Kallaste, Ants 22

Kavanagh, Darren 25

Kechida , Ridha 16, 20, 24

Khalyasmaa, Alexandra 24

Khil, Sejir Khojet El 19, 27

Kia, Shahin Hedayati 15, 16, 17

Kim, Heonyoung 14

L

Lamberti, Patrizia 25

Lambert-Torres, Germano 18, 23

Laue, Stefan 27

Lebaroud, A. 26

Leconte, Eve 17

Lee, Kun Wang 14

Lee, Sang Bin 14

Leite, Vicente 20

Li, Chendan 29

Liu, He 16

Lopes, Tiago 26

Lorzadeh, Iman 29

M

Ma, Hongzhong 23, 24

Mabrouk, A. 22

Magnaghi, Marco 22

Magrotti, Giovanni 22

Marques, André Pereira 23

Marques Cardoso, A. J. 14, 15, 16, 19, 20,

21, 23, 27

Martín-Díaz, Ignacio 28

Martinez, José A. 17

Martinez-Roman, Javier 16

Masoud, Mahmoud 26

Matos, Diogo 27

Maussion, Pascal 17, 26

Mbo'o, Christelle Piantsop 23

McCulloch, Malcolm 15, 25

Menacer, Arezki 16, 20, 24

Méndez-Martínez, Francisco 26

Mendonça, Phillip 18

Mengoni, Michele 20

Mijatovic, Nenad 22

Misir, Onur 17

Morinigo-Sotelo, Daniel 16, 25, 28

Mousazadeh, Seyyed Y. 29

N

Nandi, Subhasis 21

Nau, Sebastião Lauro 12, 14, 25

Nazari, Mohammad 29

33

O

Oliveira, Levy 18

Oliveira, Luís 23

Orkisz, Michal 23

Orman, Maciej 22

Ortega, Juan Antonio 27, 28

Ottewill, James 23

P

Palácios, Rodrigo 26

Paltanea, Gheorghe 25

Paltanea, Veronica 25

Park, Sung Bong 14

Perez-Cruz, Juan 16

Picot, Antoine 17, 26, 27, 28

Pineda-Sanchez, Manuel 16

Pinto, Cajetan 17, 22

Pires, Waldiberto 14

Platero, Carlos 17, 19

Polat, Abdullah 21

Ponick, Bernd 17

Pons-Llinares, Joan 14, 16

Puche-Panadero, Rubén 16

R

Raimo, Raffaele 25

Rashad, Essam 26, 27

Rebollo, Emilio 17, 19

Redondo, Marta 17

Régnier, Jérémi 26, 28

Reinap, Avo 21

Ribeiro, Cacilda 23

Riera-Guasp, Martín 16, 20

Rodríguez-Blanco, Marco Antonio 19, 26

Rodriguez, Pedro V. J. 17, 24

Roger-Folch, J. 16

Romeral, Luis 27

Romero-Troncoso, René 25, 28

Rossi, Claudio 15

Ruiz-Gazen, Anne 17

Rzeszucinski, Pawel 22

S

Safdarian, Farnaz 29

Sahoo, Subrat 17

Sahraoui, Mohamed 16, 20

Saint-Michel, Jacques 26

Sala, Enric 27, 28

Sala, Giacomo 20

Salameh, Farah 17

Salomon, Camila 18

Santana, Wilson 18

Sapena-Bañó, Angel 16

Savaghebi, Mehdi 28, 29

Schaab, Jochen 26, 27

Schmitz, Daniel 14

Sedky, Mohamed 24

Seghir, Amirouche Nait 21

Sergeant, Peter 27

Serra, Giovanni 20

Sethom, Houda 22, 27

Shi, Weijun 24

Shin, Sungsik 14

Simas, Miguel 13, 19

Skrimpas, Alexandros 22

Sobczyk, Tadeusz 15, 21

Sousa, Felipe R. de Carvalho 23

Stevens, Daniel 15

Strangas, Elias 17, 20

Subramanian, Jayaram 21

Sulowicz, Maciej 18, 22

Sumislawska, Malgorzata 25

Swędrowski, Leon 17

Sweeney, Christian 22

T

Talhaoui, Hicham 16, 20

Tani, Angelo 20

Tkaczyk, Agnieszka 22

Torres, Carlos López 27

Touati, Said 21

Tucci, Vincenzo 25

V

Vaimann, Toomas 22

Vasquez, Juan 29

Vertuccio, Luigi 25

Vivo, Biagio 25

Vogelsberger, Markus 15

34

W

Walas, Michal 21

Wang, Chunning 24

Wang, Tong 16

Wei, Baoze 28

Weinreb, Konrad 16

Wolbank, Thomas 15

Y

Yahia, Khaled 16, 20

Z

Zarri, Luca 20

Zhang, Zhengdong 24

Zhao, Lihang 16

Zöller, Clemens 15

Zouzou, Salah 22, 23

Zurita, Daniel 27, 28