Technical Drawings from AIW - Melbourne Waterproofing ......1.2 m centres 5x5 mm min. fillet or...
17
Technical Drawings from AIW to assist with understanding AS4654.2 Waterproofing membranes for external above-ground use. Design and installation.
Transcript of Technical Drawings from AIW - Melbourne Waterproofing ......1.2 m centres 5x5 mm min. fillet or...
Technical Drawings from AIWto assist with understandingAS4654.2 Waterproofing membranes forexternal above-ground use.Design and installation.
Detail of metal post support
Detail of horizontal membrane penetration
Detail of one way movement joint
Detail of one way construction joint
Drainage detail for exposed membrane
Detail of overflow pipe through parapet
Vertical upward termination – overflashing profile
Vertical upward termination – overflashing terminated in reglet and sealed
Vertical downward termination – balcony edge detail
Vertical downward termination – pressure seal
Edge protection of sheet membrane over parapet
Membrane termination at a cavity parapet
Gutter termination detail
Membrane termination at external opening doors
Membrane termination at wall openings
Vertical penetration detail using collar
![DVT - Multi FOV [12x9 - 5x5], [8x8 - 5x5] oder [5x5], OPG 2-in-1, … · DVT - Multi FOV [12x9 - 5x5], [8x8 - 5x5] oder [5x5], OPG 2-in-1, CEPH One-Shot oder Scan-Ceph optional, 3-in-1](https://static.fdocuments.us/doc/165x107/61024a32d7dc9526313ea8da/dvt-multi-fov-12x9-5x5-8x8-5x5-oder-5x5-opg-2-in-1-dvt-multi-fov.jpg)
