Tech Data Cloud Solutions Factory Cloud Pak Str… · Tech Data Cloud Solutions Factory Author:...
Transcript of Tech Data Cloud Solutions Factory Cloud Pak Str… · Tech Data Cloud Solutions Factory Author:...
-
Tech Data Cloud Solutions Factory
IBM Cloud Pak for Data on Azure
StreamOne Deployment Guide
Version 11.2020
-
22
Pre-Requisites
Must be a Microsoft CSP Reseller Authorized IBM Cloud Pak for Data Reseller Azure Subscription (New or Existing) IBM Cloud Pak for Data Registry API Key:
• Need to register for a trial: https://www.ibm.com/account/reg/us-en/signup?formid=urx-42212• Retrieve the API key: https://myibm.ibm.com/products-services/containerlibrary
OpenShift Pull Secret Retrieve Pull secret: https://cloud.redhat.com/openshift/install/pull-secret
Setup of DNS Zone in Azure – Either create a new Domain or transfer existing domain. See slides 10 & 11 or Step-by-step guide for details.
What is included with this guide: Slides 3 – 19 provide a walk through of StreamOne Deployment ProcessSlides 10 – 11 is a reminder to set up DNS Zone in Azure before configuring and deploying solutionSlides 20 -21 Instructions for logging into Azure Portal to verify deployment
Additional Instructions for Pre-deployment steps, configuring the solution, and post deployment steps can be found in the Tech Data IBM Cloud Pak for Data Technical Step by Step Guide.
https://www.ibm.com/account/reg/us-en/signup?formid=urx-42212https://myibm.ibm.com/products-services/containerlibraryhttps://cloud.redhat.com/openshift/install/pull-secret
-
33
Welcome to the Home Page of StreamOne Cloud Marketplace
Here, you will be able to locate, setup new Microsoft Azure Customer billing relationship and configure and deploy Click to Run solutions.
IBM Cloud Pak for Data on Azure
Keyword Search for• IBM • IBM Cloud Pak• IBM Cloud Pak for Data
Keyword search “IBM Cloud Pak”
You are currently logged in for ordering
-
44
Search ResultsTech Data IBM Cloud Pak for Data on Azure
Click for Details to see entire product listing and ability to add Solution to Cart.
Click for Details
You are currently logged in for ordering
-
55
Add to CartClick the Shopping Cart icon to add to cart
and view cart to set up your customers Azure Environment.
-
66
Please Note
Cost, and Total Columns will display “Based on Usage”
This indicates that actual cost will vary based on actual consumption of Azure Resources. This is billed on a monthly basis, typically 30
days in the rears.
Billed directly to the Tech data Reseller.
IBM Cloud Pak for Data and Red Hat Licensing is billed separately.
The Click to Run Solution is free
You are currently logged in for ordering
-
77
Easily add existing customers by leveraging the Address book.
OR
Create a New Customer by manually entering customer information.
Name, Email, Address, City, State, etc.
-
88
Top of PageSetup Microsoft Azure Subscription for your end customer.
1. Select Azure type Modern or Legacy2. Create New Azure Account, or transfer existing account.
Bottom of Page 1. Customer must Accept terms (MCA)2. Who is receiving the Admin credentials for the Azure Subscription you are creating
-
99
Confirm Details of the Order
Click “Place order” to add Solution Deployment package to your “Digital Locker”
Payment Method
After accepting the terms, you can reference a Purchase Order and select the Payment Method.
TermsCredit Card, etc.
-
1010
Please Note:Before installing IBM Cloud Pak for Data, the Microsoft Azure account you use must have a dedicated public hosted DNS zone in your account. This zone must be authoritative for the domain. This service, provides cluster DNS resolution and name lookup for external connections to the cluster.
To do this you will need to log into Portal.azure.com with the password provided in the confirmation email you will be sent to you. Once logged in, please create a new password. You will need to remember this password to log into Azure to verify the deployment in a later step.
Once you have completed this step you may continue to Slide 12 for next steps, including configuring and deploying the solution. For additional instructions refer to our detailed Step by Step guide.
*Additional screen shots are provided on the next slide for your convenience.
portal.azure.com
-
1111
Setting up DNS
Option 1: Obtain a new Domain through Azure
You can obtain a new Domain through Azure.
Connect to your Azure Portal and click on the search bar:
Search for an App Service Domain
Click on add
Search for an available Domain
Create New Resource Group
Fill in Contact information Click Create
Option 2: Transfer an existing Domain
If you plan to transfer an existing domain, you will first need to create an Azure
DNS Zone and then transfer the ownership of your domain to the Azure DNS Zone.
Search for DNS Zones:
Click on Add
Create a new Resource Group
Use your domain as the name of your DNS Zone
Review and Create
*Detailed Step-by-Step guide available with instructions to set up DNS if needed.
-
1212
KEEP Order number for your Records, until solution has been fully deployed.
Access Reseller Portal by clicking on the link or from the Home Page
Please Note:Once the order has been placed for the Click to Run Solution. The installation package will be added to the Partners Digital Locker within a few minutes. Partners access the Digital Locker from the Reseller Portal.
The Click to Run Solution must be configured from the Digital Locker.
The Reseller Portal can also be accessed from the StreamOne Home page s displayed below.
SOSS Technologies (Reseller)123 Example AddressTempe, AZ [email protected]
SJ Enterprises (End Customer Info)123 Example AddressTempe, AZ [email protected]
-
1313
Accessing the Digital Locker
From the Reseller Portal, locate and click on the Digital Locker Tile as displayed
here.
You are currently logged in for ordering
-
1414
Locate the Customer
Once clicking on the Digital Locker you will need to find the End Customer. This should match the customer information from the
order confirmation screen. Search by email address to locate
IaaS / PaaS
Once you have found and selected the customer by clicking on the company name you will be brought to this screen.
Click on the IaaS / PaaS Tab to continue
You are currently logged in for ordering
-
1515
Click to Run Solutions will be available under “Installed IaaS/PaaS Applications
Click the Modify
To Configure IBM Cloud Pak Solution
Please Note:You can Search by order number to
find the Click to Run Solution
You are currently logged in for ordering
-
1616
IBM Cloud Pak for Data on Azure
Click to Configure
This will bring up the User Interface (UI) to customize and deploy the IBM Cloud Pak for Data into Azure
Please Note
Up to this point the only the Azure Subscription has been created. This will be indicated in Green next to the Status
of Subscription. No resources have been deployed into Microsoft Azure.
You are currently logged in for ordering
-
1717
Customize and Deploy
You will see the User Interface (UI) pop up once you select the Click to Configure button on the previous screen.
Here you will be presented with various options to customize, select Azure Region, select the Cloud Pak Data Profiles of your choice, and will be asked to input your Red
Hat & IBM Cloud Pak Licenses.
Once complete Click the Deploy Now Button
This will initiate the deployment which should be complete in approximately 3- 4 hours.
Deploy Now
-
1818
Configuring the Solution
Ability to Select the Cloud Pak for Data of your Choice Retrieve and past in the applicable IBM API Key
Configuring the Solution
Drop down menu offers five deployment options.The green Slide button allow for additional customization
-
1919
Configuring the Solution continued…
A detailed Step by Step guide is available to provide in depth guidance to deploy the solution.
Below are additional screen shots of the UI, once you have made your selections click Deploy Now
Here you will have to select:
- A Cluster Name
- The Datacenter Location
- Your OpenShift Pull Secret
Please note that you have to retrieve your OpenShift Pull Secret from the mentioned link:
https://cloud.redhat.com/openshift/install/pull-secret
Select Environment Size
https://cloud.redhat.com/openshift/install/pull-secret
-
20 © 2018 Tech Data. All Rights Reserved.
Navigate to Portal.Azure.com
Notes:• You’ll log into this page with the password provided in the confirmation email.• You will need to create a new password. Use something you will remember.
-
21 © 2018 Tech Data. All Rights Reserved.
Confirm Subscription Creation
Notes:• Select all services- Subscriptions. Here you should see a subscription with Sub ID.