TBS Combination Arrestor V50!3!280V
Transcript of TBS Combination Arrestor V50!3!280V
-
8/18/2019 TBS Combination Arrestor V50!3!280V
1/1
data sheet
Surge protection, arrestor, type 1+2 (office and housing)
1 OBO | 10/2015
Combination arrestor V50, 3-pole 280 V
Lightning current combination arrestor, type 2
• For the equipotential bonding of lightning current to VDE 0185-305 (IEC 62305)
• Lightning current discharge capacity of 12.5 kA (10/350) per pin and up to 50 kA
(10/350) in total
• Modular, plug-in arrestor with dynamic cut-off unit and visual status display
• Locking mechanism with vibration protection and voltage keying
• Halogen-free plastic (UL 94 V-0)
• The FS variants have a potential-free changeover contact for remote signalling
Application: Lighting current equipotential bonding for buildings of class III and IV.
280 3 IP20
Type
V50-3-280
Maximum
continuous
voltage AC
V
Pole
version
Protec-
tion
rating
Pack.
pcs
1
Weight
kg/100 pcs.
46,500
Item No.
5093 51 1
280,00
Type 1+2
class I+II
12,50
30,00
50,00
1,30
TN-C
Hat rail 35 mm
3
3 TE
160 A gL/gG
IP20
-40-+80
Visual
35,00
35,00
UL
VUC
kAIimpkAIn / L-NkAImaxkVUp
A
°CTu
mm²
mm²
Maximum continuous voltage AC
SPD to EN 61643-11
SPD to IEC 61643-11
Lightning surge current (10/350μs)
Nominal discharge current (8/20 µs)
Maximum discharge current (8/20 μs)
Protection level
Network form
Mounting type
Pole version
Size
Max. mains-side overcurrent protection
Protection rating
Operating temperature range
Signalling on device
Max. cable cross-section flexible (fine-wire)
Max. cable cross-section rigid (single wire/multi-
wire)
FM contacts
Switching power AC
Switching power DC
Approvals
Item No. 5093 51 1