Taller de Arquitectura de Bogotá (Arq. Daniel Bonilla y Arq ......Taller de Arquitectura de Bogotá...

5
[ 182 ] Julio de 2020. E-ISSN 2215-969X. Bogotá, pp 182-191. https://revistas.uniandes.edu.co/journal/dearq Dearq 27. OTRAS COMPUTACIONES Dearq 27. PROYECTOS Edificio 8111. Taller de Arquitectura de Bogotá [ 183 ] Edificio 8111 Taller de Arquitectura de Bogotá (Arq. Daniel Bonilla y Arq. Marcela Albornoz) Bogotá, Colombia. 2019 Fotografía: Pequeño Robot-Alejandro Arango The driving force behind the conception of this office building was to bring together architecture, understood as internal and external spatial form, and structure, or the supporting system for the building. For the Taller de Arquitectura de Bogotá, the pronounced distinction between the two, which has arisen in recent decades, is an opportunity to take up once again the comprehensiveness that architecture and structure had for centuries. Based on this premise, a diagrid structural system was propo- sed in which the structure is at the same time an expression of the architecture. Instead of reinforced structural beams and straight columns, a system of diagonals is used. There is a cha- llenge in distribution: to avoid the flexibility required by the in- terior space to be interrupted by the diagonals. Moreover, this system works on the perimeter of the building, and thus is the most notable element of the façade. The material expression of the concrete is clearly the protagonist thanks to the contrast between the strength of the structure and the transparency of the glass that creates the distinctive image of this building wi- thin its immediate surroundings. Opting for a non-conventional architectural and structural solution brought many challenges that were overcome with interdisciplinary work and collaboration between different ex- perts as well as by implementing digital tools such as BIM and 3D modelling. For example, for the study and optimization of a diagrid or continuous diagonal structure, the starting point was to develop a code using Grasshopper to parametrize the variables relevant to the building: height, number of levels, and diagonal structures. This streamlined the study and refine- ment of the structure, and the code allows for efficient study of alternatives as it is possible to measure and optimize both the geometric system and the resulting amount of material. El motivo principal para la concepción de este edificio de ofi- cinas fue reunir arquitectura, entendida como forma espacial interna y externa, con la estructura o sistema portante de la edificación. Para el Taller de Arquitectura de Bogotá, la mar- cada diferenciación entre ambas que se ha presentado en las últimas décadas es la oportunidad de retomar la integralidad que han tenido por siglos la arquitectura y la estructura. Bajo esta premisa se plantea un sistema estructural tipo dia- grid, en el que la estructura es la expresión misma de la arqui- tectura. Así, se utiliza un sistema de diagonales, a diferencia de los sistemas aporticados tradicionales con vigas y columnas rectas, lo cual presentó un reto de distribución para evitar que las diagonales no interrumpieran la flexibilidad necesaria para el espacio interior. Por otra parte, este sistema funciona en el perímetro de la edificación y, por tanto, se convierte en el ele- mento más notable de la fachada. La expresión material del hormigón toma un claro protagonismo, gracias al contraste entre la dureza de la estructura y la transparencia del vidrio que crean la imagen distintiva de este edificio dentro de su entorno próximo. Optar por una solución arquitectónica y estructural no con- vencional trajo consigo numerosos retos que se sortearon por medio del trabajo interdisciplinar y la colaboración entre dife- rentes expertos, así como la implementación de tecnologías y herramientas computacionales como sistemas BIM y de mode- lado en 3D. Por ejemplo, para el estudio y optimización de la estructura tipo diagrid o de diagonales continuas se parte del desarrollo de un código en Grasshopper, con el fin de parame- trizar las variables pertinentes al edificio: la altura, el número de niveles y las diagonales estructurales. De este modo, se agi- liza el estudio y la depuración del diseño estructural, donde el código permite el estudio eficiente de alternativas, ya que se hace posible medir y optimizar tanto el sistema geométrico como la cantidad de material resultante. Vista exterior / Exterior view

Transcript of Taller de Arquitectura de Bogotá (Arq. Daniel Bonilla y Arq ......Taller de Arquitectura de Bogotá...

Page 1: Taller de Arquitectura de Bogotá (Arq. Daniel Bonilla y Arq ......Taller de Arquitectura de Bogotá [ 189 ] Vista exterior / Exterior view Modelo y algoritmo paramétrico para la

[ 182 ] Julio de 2020. E-ISSN 2215-969X. Bogotá, pp 182-191. https://revistas.uniandes.edu.co/journal/dearq

Dearq 27. OTRAS COMPUTACIONES Dearq 27. PROYECTOS

Edificio 8111. Taller de Arquitectura de Bogotá [ 183 ]

Edificio 8111Taller de Arquitectura de Bogotá (Arq. Daniel Bonilla y Arq. Marcela Albornoz)Bogotá, Colombia. 2019

Fotografía: Pequeño Robot-Alejandro Arango

The driving force behind the conception of this office building was to bring together architecture, understood as internal and external spatial form, and structure, or the supporting system for the building. For the Taller de Arquitectura de Bogotá, the pronounced distinction between the two, which has arisen in recent decades, is an opportunity to take up once again the comprehensiveness that architecture and structure had for centuries.

Based on this premise, a diagrid structural system was propo-sed in which the structure is at the same time an expression of the architecture. Instead of reinforced structural beams and straight columns, a system of diagonals is used. There is a cha-llenge in distribution: to avoid the flexibility required by the in-terior space to be interrupted by the diagonals. Moreover, this system works on the perimeter of the building, and thus is the most notable element of the façade. The material expression of the concrete is clearly the protagonist thanks to the contrast between the strength of the structure and the transparency of the glass that creates the distinctive image of this building wi-thin its immediate surroundings.

Opting for a non-conventional architectural and structural solution brought many challenges that were overcome with interdisciplinary work and collaboration between different ex-perts as well as by implementing digital tools such as BIM and 3D modelling. For example, for the study and optimization of a diagrid or continuous diagonal structure, the starting point was to develop a code using Grasshopper to parametrize the variables relevant to the building: height, number of levels, and diagonal structures. This streamlined the study and refine-ment of the structure, and the code allows for efficient study of alternatives as it is possible to measure and optimize both the geometric system and the resulting amount of material.

El motivo principal para la concepción de este edificio de ofi-cinas fue reunir arquitectura, entendida como forma espacial interna y externa, con la estructura o sistema portante de la edificación. Para el Taller de Arquitectura de Bogotá, la mar-cada diferenciación entre ambas que se ha presentado en las últimas décadas es la oportunidad de retomar la integralidad que han tenido por siglos la arquitectura y la estructura.

Bajo esta premisa se plantea un sistema estructural tipo dia-grid, en el que la estructura es la expresión misma de la arqui-tectura. Así, se utiliza un sistema de diagonales, a diferencia de los sistemas aporticados tradicionales con vigas y columnas rectas, lo cual presentó un reto de distribución para evitar que las diagonales no interrumpieran la flexibilidad necesaria para el espacio interior. Por otra parte, este sistema funciona en el perímetro de la edificación y, por tanto, se convierte en el ele-mento más notable de la fachada. La expresión material del hormigón toma un claro protagonismo, gracias al contraste entre la dureza de la estructura y la transparencia del vidrio que crean la imagen distintiva de este edificio dentro de su entorno próximo.

Optar por una solución arquitectónica y estructural no con-vencional trajo consigo numerosos retos que se sortearon por medio del trabajo interdisciplinar y la colaboración entre dife-rentes expertos, así como la implementación de tecnologías y herramientas computacionales como sistemas BIM y de mode-lado en 3D. Por ejemplo, para el estudio y optimización de la estructura tipo diagrid o de diagonales continuas se parte del desarrollo de un código en Grasshopper, con el fin de parame-trizar las variables pertinentes al edificio: la altura, el número de niveles y las diagonales estructurales. De este modo, se agi-liza el estudio y la depuración del diseño estructural, donde el código permite el estudio eficiente de alternativas, ya que se hace posible medir y optimizar tanto el sistema geométrico como la cantidad de material resultante.

Vista exterior / Exterior view

Page 2: Taller de Arquitectura de Bogotá (Arq. Daniel Bonilla y Arq ......Taller de Arquitectura de Bogotá [ 189 ] Vista exterior / Exterior view Modelo y algoritmo paramétrico para la

[ 184 ] Julio de 2020. E-ISSN 2215-969X. Bogotá, pp 182-191. https://revistas.uniandes.edu.co/journal/dearq

Dearq 27. OTRAS COMPUTACIONES Dearq 27. PROYECTOS

Edificio 8111. Taller de Arquitectura de Bogotá [ 185 ]

Planta de localización, sótano y primer nivel / Site plan, basement, and first level

CALLE 81 # 11-08

1 CUARTO TÉCNICO

2 PATIO TÉCNICO

3 CUARTO DE MÁQUINAS

PLANTA SOTANO 1

PLANTA PRIMER PISO

1 LOBBY INGRESO

2 OFICINA

3 HALL ASCENSORES

4 BAÑOS

5 DEPOSITOS

6 TERRAZAS

PLANTA DE LOCALIZACIÓN

1 PUNTO FIJO

2 LOUNGE OPERADORES

3 HALL ASCENSORES

4 BAÑOS

5 DEPOSITO

6 CUARTO DE ASEO

Planta de los niveles seis y doce / Floor levels six to twelve.

Cortes longitudinal y transversal / Longitudinal and cross section drawings

1 CIRCULACIÓN OFICINAS

2 OFICINA

3 HALL ASCENSORES

4 BAÑOS

5 CUARTO TÉCNICO

6 CUBIERTAPLANTA SEXTO NIVEL

PLANTA DOCEAVO NIVEL

1 TERRAZA CUBIERTA

2 OFICINA

3 HALL ASCENSORES

4 BAÑOS

5 CUARTO TÉCNICO

6 TERRAZA

Page 3: Taller de Arquitectura de Bogotá (Arq. Daniel Bonilla y Arq ......Taller de Arquitectura de Bogotá [ 189 ] Vista exterior / Exterior view Modelo y algoritmo paramétrico para la

[ 186 ] Julio de 2020. E-ISSN 2215-969X. Bogotá, pp 182-191. https://revistas.uniandes.edu.co/journal/dearq

Dearq 27. OTRAS COMPUTACIONES Dearq 27. PROYECTOS

Edificio 8111. Taller de Arquitectura de Bogotá [ 187 ]

Fachadas norte, sur y oriental / North, south, and east elevation

Vistas interiores del sistema estructural / Interior views of the structural system

FACHADA CALLE 82 FACHADA CALLE 81 FACHADA CARRERA 11

Page 4: Taller de Arquitectura de Bogotá (Arq. Daniel Bonilla y Arq ......Taller de Arquitectura de Bogotá [ 189 ] Vista exterior / Exterior view Modelo y algoritmo paramétrico para la

[ 188 ] Julio de 2020. E-ISSN 2215-969X. Bogotá, pp 182-191. https://revistas.uniandes.edu.co/journal/dearq

Dearq 27. OTRAS COMPUTACIONES Dearq 27. PROYECTOS

Edificio 8111. Taller de Arquitectura de Bogotá [ 189 ]

Vista exterior / Exterior view

Modelo y algoritmo paramétrico para la generación del sistema estructural en diagrid / Model and parametric algorithm to genera-te a diagrid structural system

Altura del edificio Número de placasDimensiones en X y Y

de las placas del edificio

OPCIÓN 1 OPCIÓN 2

OPCIÓN 3 OPCIÓN 4

OPCIÓN 5 OPCIÓN 6

Número de divisiones

triangulares

Espesor de las columnas

Page 5: Taller de Arquitectura de Bogotá (Arq. Daniel Bonilla y Arq ......Taller de Arquitectura de Bogotá [ 189 ] Vista exterior / Exterior view Modelo y algoritmo paramétrico para la

Dearq 27. OTRAS COMPUTACIONES Dearq 27. PROYECTOS

Edificio 8111. Taller de Arquitectura de Bogotá [ 191 ]

Vista aérea / Arial view