TABLE OF CONTENTS - East Central College · [email protected] Lindsay Underwood,...

St. Louis Austin Carolinas New York BeijingArchitecture Interior Design Town Planning Landscape Architecture Graphic Design Development Construction

TABLE OF CONTENTS

GENERAL SPECIFICATIONS

FURNITURE SPECIFICATIONS:

Bid Info Sheet Summary Sheet

Bid Package

Bid Group 1 FURNISHINGS – Office

Bid Group 2 FURNISHINGS – Classroom

Bid Group 3 FURNISHINGS – Library Shelving

Bid Group 4 FURNISHINGS – Soft Seating Public

Bid Group 5 FURNISHINGS – Library, Learning Center Furnishings

Bid Group 6 FURNISHINGS – Task Chairs – KI

Bid Group 7 FURNISHINGS – Task Chairs – Allsteel

Bid Group 8 FURNISHINGS – Task Chairs – Herman Miller

Bid Group 9 FURNISHINGS - Task Chairs – Harter


St. Louis Austin Carolinas Denver New York Philadelphia BeijingArchitecture Interior Design Town Planning Landscape Architecture Graphic Design Development Construction

This page has intentionally been left blank.



INTRODUCTIONS

1.1 Bidders shall review full contents of this bid package against the “Table of Contents” toassure that they have received a complete document and shall notify the Specifier of anyinconsistencies, contradictions, errors or omissions. All material changes will be issued tobidders as addenda and will be considered to be a part of this bid package.

1.2 Bidders shall review all drawings to verify that all specified items are consistent withdrawings in size and quantities. Bidders shall notify the owner of any inconsistencies,contradictions, errors or omissions.

1.3 Bidders should carefully read and understand the terms and conditions contained hereinprior to completing forms.

1.4 The Owner (East Central College) participates in the following purchasing organizations.TCPN, US Communities, E & I, ROi (medical), NJPA, NIPA, and GSA. All pricing at aminimum shall reflect pricing per organizations pre-negotiated discounts.

1.5 Bids are due by 2:00 PM Friday November 19th 2010. Bids are to be submitted in sealedenveloped and delivered to:

East Central CollegeAttn: Dr. Jon BauerVice President of Finance and Administration1964 Prairie Dell RoadUnion, MO 63084

1.6 Incomplete bids will not be accepted

1.7 Bid Package Includes:Furniture Bid Package Summary SheetsFurniture Specifications (9) PackagesFurniture PlansElectronic files are available for viewing and for purchase by contacting:

Go to www.customblueprint-supply.com and click on the "Plan Room" link on the home page.Then proceed to enter the Job Name, Password, and your personal information.Then scroll down to bottom of page to agree to the terms and click on "Submit".This should bring you to the project that you requested so just click on what you would like tosee, "Plans" or "Specifications".

Job Name: ECC AdminFurniturePassword: 09161.ffe

The Job Name and Password are case sensitive characters.

http://www.customblueprint-supply.com/



Please contact Custom Blueprint & Supply with any questions.Thank You,Custom Blueprint & Supply, Inc.1632 South BroadwaySt. Louis, Mo. 63104314-231-4400Fax-231-0426www.customblueprint-supply.com

1.8 Bidder Information

Name: __________________________________________________________________

Address: __________________________________________________________________

__________________________________________________________________

Phone: __________________________________________________________________

Contact Name: __________________________________________________________________

Contact Email: __________________________________________________________________

1.9 Fill out bidder information above and return signed copy of General Specifications along withpricing.

All pricing information must be returned on the Furniture Bid Package Summary Sheets alongwith the following line item costs:

FreightDeliveryNon-Union Installation, (Normal Business Hours)East Central College is tax exempt (Certificate Available upon request)

2.0 DEFINITIONS

2.1 OWNER: Junior College District of East Central MissouriEast Central College

2.1.1 CONTRACT MANAGER Dr. Jon Bauer,Vice President Finance, and AdministrationEast Central College1964 Prairie Dell RoadUnion, MO 63084Phone: 636.584.5193

http://www.customblueprint-supply.com/



2.1.2 For duration of bidding process, point of contact for all correspondence is:Julie SteffensLindsay UnderwoodThe Lawrence Group319 North 4th Street Suite 1000St Louis, MO 63102Phone: 314.231.5700

2.2 VENDOR: For the purpose of this bid package, successful bidder(s) shall be definedherein after as vendor(s).

2.3 BID PACKAGE: For the purpose of this bid package, bid groups refers to a distinct groupincluding one or more furnishings terms. There are nine (9) bid packages.

2.4 EQUIVALENT ITEM OR PRODUCTS:Shall mean to possess the same performance/design qualities andcharacteristics, and to fulfill the utilitarian function without compromisingquality, durability or longevity. …

2.5 FURNITURE ITEM CODES:For purpose of this bid package furniture item codes found on theFurniture Floor Plans located on the furniture plans are correlated to FF&ESpecifications.

2.6 INTERIOR DESIGNER OR TECHNICAL MANAGER:For the purpose of this bid package, it shall be understood “InteriorDesigner” and “Technical Manager” is referring to:

Julie Steffens, NCIDQThe Lawrence Group Architects of St Louis, Inc319 N. 4th StreetSuite 1000St. Louis, MO 63102(314) 231-5700(314) [email protected]

Lindsay Underwood, LEED, APThe Lawrence Group Architects of St Louis, Inc319 N. 4th StreetSuite 1000St. Louis, MO 63102(314) 231-5700(314) [email protected]

mailto:[email protected]




3.0 SCOPE OF WORK

The Students Services Building (formerly the Administration Building) on the campus of East CentralCollege is being renovated to better service the student population. Construction on this facility hasalready begun. The project involves the procurement and installation of furnishings specified herein.Items include new furnishings for offices, conference rooms, public lobby, library, learning center,classrooms and various support spaces.

4.0 DESCRIPTION OF WORK

4.1 Installation Date: July 8-30 2011. To be verified by Owner prior to contract award.

4.2 Pricing to include the exact quantities, all necessary parts, accessories, and connectors toassemble and power all furniture in specification.

4.3 Furnish all labor, materials, tools, equipment and services necessary includingsubcontractors to complete work. Vendor will be responsible for all delivery, installation andwarranties.

4.4 Warehouse any items as needed according to manufacturer’s instructions and as directedby Owner.

4.5 Install all furnishing components as specified.

4.6 The specifier reserves the right to make final approval of dealer’s proposed installationcompany.

5.0 TIME REQUIREMENTS

All bidders will be required to prove their ability and capacity to provide the entire installation withinthe specified delivery period. Such proof may involve inspections of production facilities of thebidders by the Owner and/or contractors with reference installations. The Owner reserves the rightto do either or both.

6.0 QUALIFICATION OF BIDDERS

Bids shall be accepted only from firm firms regularly engaged in the manufacture of contractfurniture.

6.1 The successful bidder is responsible for providing furniture installation drawings andestimated installation time.

6.2 Bidders may not contact the end user directly, all questions and should b directed to TheLawrence Group.



6.3 The successful bidder is responsible for confirming that the specified installation date canbe met. If any product lead times cannot be met, the expected delivery dates are to bediscussed with The Lawrence Group.

6.4 The successful bidder is required to order all items in a timely manner to guarantee deliveryand installation of all products by indicated installation date.

6.5 Upon awarded bid, bidder is to reserve all necessary fabric for each required item and notify The Lawrence Group in writing of the reservation as well as any items of concern.

6.6 The successful bidder(s) will supply The Lawrence Group with bi-monthly (1st and 15th day) written update on all ship dates.

6.7 The successful bidder(s) will copy The Lawrence Group on Proof of Delivery (POD) to warehouse upon receiving product.

6.8 The successful bidder is responsible for coordinating with Project General Contractor for all necessary wiring/cabling of voice and data of all powered furnishings, systems furniture.

6.9 Any problems with the furnishings (i.e.: delays, backorder, discontinued items) will be directed back to The Lawrence Group within 10 days of the successful bidders receiving the approved specifications.

6.10 Successful bidder is responsible for verifying that the electrical components specified meet local codes and regulations.

7.0 SUBMISSION, EVALUATION AND AWARD OF BID(S)

7.1 It is the intent of the Owner to award like items in groups identified as bid groups. ECCreserves the right to make MULTIPLE AWARDS BY BID GROUPS if ECC deems this to be in its bestinterest.

7.2 Bidders are required to bid on all items within a bid package for which they meetspecifications. Bidders may bid on all Bid Packages for which they meet specifications.Bidders may make recommendations for substitutions where “or approved equal” isindicated in specifications. Bidders must submit request for substitution for specifierapproval no later than 5 business days prior to bid deadline.

8.0 BUILDING FACILITIES

Use of building shall be limited. Installation of furnishings shall not interrupt building construction.Therefore, successful bidder(s) shall coordinate delivery and installation with the Owner. Refer to12.0 Shipping, Delivery and Installation.

9.0 EQUIVALENT PRODUCTS AND QUALITY ASSURANCE

9.1 The bid packages are not intended to discriminate against or prevent any manufacturer,distributor or supplier from bidding an equivalent item or product. It is not the intent of thespecifications, drawings or schedules to limit the items or products to be provided for this



bid package. Where any item, article and material is specified by proprietary name, tradename, manufacturer, catalog number or other identification, it has been done so to set adefinite standard and/or style to provide a reference for comparison as to quality,performance, design, appearance and physical conformity.

9.2 The vendor shall be responsible for any additional cost or delays resulting from havingfurnished materials, equipment or fixtures other than those specified.

9.3 Equivalent items other than referenced manufacturer’s items will be considered unlessnoted otherwise, provided all specifications provisions are satisfactorily met. Quality ofmaterials and workmanship must be equivalent to, or exceed the materials andworkmanship of the referenced items. New products will be accepted for the specificationsand all related documents herein shall be considered as the minimum acceptable standard.The Specifier shall be the final judge of whether a proposed substitution or alternatetreatment meets or exceeds the characteristics of a specified item and decision of theSpecifier Relative to the equality of items proposed as substitutes for specified items shallbe final and conclusive.

9.4 The components of all upholstered furniture shall meet or exceed the requirements for Class1 when tested in accordance with NFPA 260, standard methods of tests and classificationsystem for cigarette ignition resistance of components of upholstery furniture. Within thirty(30) calendar days from receipt of notice of award, successful bidder shall submit writtenverification that shows compliance with fire safety requirement. Such written verificationshall be forwarded to Julie Steffens, The Lawrence Group Architects of St Louis, Inc, 319North 4th Street, Suite 1000, St Louis, Mo. 63102 or via email [email protected]

9.5 Successful bidder(s) shall match color, quality, pattern and depth of finishes that areindicated for referenced manufacturers.

9.6 If bidder does not take exception to the referenced manufacturers’ items as listed in this bidpackage, or does not provide the required verification data about the items being offered,the Owner will assume that the bidder proposes to furnish the exact item(s) that isreferenced in this bid package.

10.0 SUBMITTALS

10.1 Submittal with bid: Proof that a proposed item is equivalent to or exceeds this specificationis the responsibility of the bidder. If bidding on items other than the referenced specificationitem, the following verification information for each proposed item must be included in the“Approved Substitutions” portion of the Bid Tally Sheet:

A. Statement that identifies the project, bidder, manufacturer, and item or product name or number.B. Descriptive product literature, specification, or other written document which verifies that item or product meets or exceeds this specification.C. Photographic image or illustrations that accurately depict the item.




10.2 Materials and finish samples and shop drawings/installation drawings following bidopening: Bidders will be required to submit material/finish samples and/or shop drawingsof any or all proposed items within 15 days of ordering the product.

A. Statement that identifies the project, bidder, manufacturer, and item or product name or number.B. Bidder shall submit samples/finishes including substrate as indicated

(Minimum 12”x12”).C. Provide drawings (elevations, floor plan, perspective) plotted at scale ¼”=1’-

0” showing layout and type of furnishings. Drawings shall show dimensions,materials and all attachments and/or hardware.

D. Cost of sample submittal shall be responsibility of bidder. Sample will beretained by Specifier to insure product quality and standard.

10.3 Pre-award and reproduction prototype sample submittals

A. Bidders will be required to submit pre-award prototype samples of any or allof the proposed items for which they submitted bids. Additionally, biddersmay be required to assemble a “mock-up” as requested by the Owner.Bidders shall furnish the requested samples free of charge to the Owner nolater than (21) calendar days following request.

B. If prototype sample fully meets specifications, it will be considered part of theorder, if, and when, it is determined that the sample will match the color/finishof the remainder of the order. Sample submittals that fail to meetspecifications will be returned to the bidder at their cost.

11.0 SHIPPING, DELIVERY, AND INSTALLATION

11.1 Except for any surplus components , the Owner will not accept deliveries other than at thesite, nor shall the Owner accept deliveries at any other time other than the scheduled periodunless there is prior authorization. Delivery and installation shall be coordinatedsimultaneously at the job site.

11.2 Deliveries shall be at designated areas only; any deviation from this locale shall bepermissible only if prior permission is granted.

11.3 Vendor(s) shall assume full responsibility for all items until they are installed, accepted, andready for use and shall be responsible for providing all materials and equipment necessaryfor installation. Vendor(s) shall protect all items during transit, delivery, handling andinstallation to prevent damage, soiling and deterioration.

11.4 Vendor(s) shall be responsible for acquainting themselves with the site conditions,approach to building and facilities for delivering, placing and handling of items and relatedmaterial and equipment



11.5 All delivery and installation employees or authorized personnel must be uniformed oridentified with name badges at all times while at the installation site.

11.6 Each vendor’s installation shall be done under the supervision of an authorized agent of thatvendor. Each vendor shall complete the work in the best possible and most expeditiousmanner in accordance with the furniture plans or installation plans. The Owners reserve theright to revise these plans as necessary.

11.7 Precaution shall be taken to protect the building from damage. Damage to any or allfinishes or other furnishings noticed at the time of installation shall be brought to theattention of the Owner or Owner representative prior to placement of items, since suchdamage may otherwise be considered the responsibility of the vendor(s). Should thevendor(s) cause damage, the cost of restoring areas of product to their original conditionshall be at the expense of the vendor(s). Necessary repair to the building shall bepreformed under Owner supervision.

11.8 Vendors shall place jamb guards at all doorways/corners to protect the building.

11.9 Where installation is to be over finish flooring, vendor(s) shall take special precaution andmake all necessary provisions to protect all flooring from soiling, stretching, marring or otherdamage of any kind. Vendor(s) shall provide masonite panels on which to roll wheeledequipment, so as not to cause stretching of carpet or other damage to any finish flooring.

11.10 Vendor(s) shall set all items in place as shown on drawings with tops level and all dust, lintand dirt removed from all furniture and furnishings. Surface shall be cleaned, oiled orpolished as required by manufacturer’s instructions. Tape markings are to be removedfrom surfaces.

11.11 Vendor(s) shall remove all crating, plastic covering, debris and tools from the project siteand properly dispose of off-site, leaving premises in showroom condition with all items freefrom dust and ready for Owner use.

11.12 Vendor(s) are responsible for the assembly of all specified items. All items shall be fullyoperational and ready for usage.

12.0 WARRANTIES AND MAINTENANCE MANUALS

12.1 in addition to the manufacturer’s warranty, vendor(s) shall guarantee all materials and allworkmanship of all item(s) for a minimum period of one (1) year following the date of projectacceptance of item(s) by Owner. If during the guarantee period, any defects or faultymaterials or workmanship are found, vendor(s) immediately, upon notification by the Owner,proceed at their owner expense to replace or repair same, together with any damagedfinishes, fixtures, equipment and furnishings that may be a result of this defective permanufacturers warranty under Owner supervision.



12.2 Bidder(s) shall be required to provide written copies of manufacturers’ warranties for allitems being bid and shall note any if any of the warranties are greater than that required bythis bid package. Bidder(s) shall submit copies of written warranties with their bid.

12.3 Upon delivery and installation, vendor(s) shall submit at least one copy of eachmanufacturer’s operating/maintenance manual to project manager.

13.0 INSPECTIONS AND APPROVALS

13.1 Inspections procedures: Vendor(s) shall notify the Owner when items are completelyinstalled and ready for inspection. The Specifier along with the Owner or Owner’srepresentative shall perform an initial inspection and produce an initial “Punch List for Workthat remains to be completed” that shall be presented to the vendor(s).

13.2 Procedure for final inspection: Vendor(s) shall be responsible for notifying the Owner or Owner’s representative that “Punch List Work” has been completed and is ready for final inspection.

By submitting a quote, you acknowledge that you have read and understand the responsibilities listedabove, and the Terms and Conditions included in this package, and agree to comply with them asstated.

Dealer Signature___________________________________ Date________________

END OF SECTION

Project Name: East Central College, Administration Building RenovationProject Location: Union Mo

Bid Package Summary Sheet

Dealer Name:Address

Contact Information:

Product per Specifications Approved SubstitutionsFurniture Tag Qty Unit Cost Extended Cost Unit Cost Extended Cost

WS-1WS-1AWS-2WS-3WS-4WS-5WS-6WS-7WS-8WS-9WS-10WS-11WS-12WS-13WS-14WS-15WS-16WS-17WS-18WS-19WS-20WS-21WS-22WS-23WS-24WS-25WS-26WS-27WS-28WS-29WS-30WS-31WS-32WS-33WS-34SC-1SC-1ASC-2SC-3SC-3ASC-3BSC-3CSC-3DSC-3FSC-3GSC-3HSC-4SC-4ASC-4BSC-4CSC-4DSC-4ESC-5SC-6SC-6A

Furniture Bid Package #1

Furniture Bid Package Summary SheetS.xls

SC-6BSC-7SC-8SC-11SC-12CR-1MP-1MP-1AT-1T-2T-3T-3AT-4T5T-6A-1A-7A-11A-12OT-3OT-4F-1F-2F-3F-4F-5F-5AF-6F-7F-7AF-8F-9F-10F-11F-11AF-12F-13F-14F-15F-16F-17F-18F-19F-20 NOT USEDF-21F-22 NOT USEDF-23 NOT USEDF-24F-25BC-1

Subtotal




Dealer Name:Address



CC-1CC-2CC-3CC-4CC-4ACC-5CC-5ASD-1SD-1ASD-2SD-2AA-2A-2A-3AA-6CT-1CT-1ACT-1BCT-1CCT-1DCT-1ECT-1FCT-2CT-3CT-3ACT-3B

Subtotal





Dealer Name:Address



EP-1EP-2EP-3EP-4LS N/A N/A N/A N/A N/ALS-2 N/A N/A N/A N/A N/ALS-3

Subtotal





Dealer Name:Address



LC-1LC-2LC-2ALC-3LC-3ALLC4LC-4ALC-5LC-6OM-1OM-1AOM-1BOM-1COM-2OM-2AOM-2BB-1B-2B-3OT-1OT-2A-5A-6A-9

Subtotal





Dealer Name:Address



SC-9SC-9ASC-10SC-10AT-7T-7AT-8T-8AT-8BT-8CT-9A-8

Subtotal





Dealer Name:Address



TC-6TC-6ATC-6BTC-6CTC-6DTC-6ETC-6FTC-6GTC-8TC-9

Subtotal





Dealer Name:Address



TC-2TC-2ATC-3

Subtotal





Dealer Name:Address



TC-4TC-4ATC-5TC-7

Subtotal





Dealer Name:Address



TC-1TC-1A

Subtotal



Furniture Specification - Bid Package #1Project Name: East Central College AD BuildingProject Number: 09161Issue Date: November 5, 2010Prepared by: The Lawrence Group Colors

WS-1Quantity: Refer to Furniture Plan

Manufacturer: Kimball Office or Approved Equal

Type: Wall Mounted Office Furnishings

Style Name: Footprint (or approved equal)

Model Number: Refer to Components Below

Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Square*Wire Manager Rim-all surfaces*PVC Edge-Matching*Undersurface Files-Laminate fronts/chassis*Under surface Storage Profile: Square*Overhead Storage-Metal Chassis/Metal Fronts*Overhead Storage Profile: Lunar*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing for necessary vertical cord management*Vertical Storage Profile: Square* Where tool tile indicated, include $150.00 list per office for tool tile accessories* Accessories to be selected once contract is awarded to winning bidder.* Pulls: Arc Pull-501 Platinum Metallic

Finishes: Worksurfaces: LMH-Mocha Cherry LaminatePVC Edge: Dark ChocolateWire Manager: Dark ChocolateUnder surface storage: LMH Mocha CherryOverhead Storage: Painted-501 Platinum MetallicTack Board Fabric: Grade A-Kimball, Pattern: Fusion, Color: 16105 MineralVertical Storage: Painted-501 Platinum MetallicFixed Column Leg Support: 501 Platinum Metallic

Notes: *Bidders to verify swing of cabinet doors, and orientation of worksurfaces infurniture plans*Face/Height of all overhead storage to align with any adjacent storage components,include pricing for all necessary filler panels and/or leveling strips as required

Provide fully adjustable articulating keyboard tray (KBT) with mouse pad whereindicated on plan.

Components: A. (1) 24" x 48" x 72" Peninsula Top: SS244872WSUE-L3-P-STD-LMH-STD-B. (1) 24"x 48" Rectangular Work surface: SS2448WSS-L3-P-STD-LMH-STD-C. (1) 24" x 84" Rectangular Work surface: SS2484WSS-L3-STD-LMH-STD-D. (2) 48" W Lunar Overhead Storage Bin: 24S144814SOFM-KSB-STDM-501E. (1) 48" W Tack Tile: Refer to Tack Fabric listed in "Finishes" aboveModel: 36P482ITASCF. (1) 48" W Tack Tile/Tool Rail Combo-TackModel Tack: 36P48H18ITASCModel Tool: 36P48H06ITSG. (1) Fixed Column Leg: AC2804SFB-STDM-501H (2) 30"W 2H Lateral File (below work surface) Model: FSL233027-L-ARC501-KSB-MHI. Vertical Storage: Refer to F.14/F11A for specifications


WS-1AQuantity: Refer to Furniture Plan





Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Square*Wire Manager Rim-all surfaces*PVC Edge-Matching*Undersurface Files-Laminate fronts/chassis*Under surface Storage Profile: Square*Overhead Storage-Laminate Chassis/ Fronts*Overhead Storage Profile: Square*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing for necessary vertical cord management*Vertical Storage Profile: Square* Where tool tile indicated, include $150.00 list per office for tool tile accessories* Accessories to be selected once contract is awarded to winning bidder.* Pulls: Arc Pull-501 Platinum Metallic

Finishes: Worksurfaces: LMH-Mocha Cherry LaminatePVC Edge: Dark ChocolateWire Manager: Dark ChocolateUnder surface storage: LMH Mocha CherryOverhead Storage: Laminate: LMH Mocha CherryTack Board Fabric: Grade A-Kimball, Pattern: Fusion, Color: 16105 MineralVertical Storage: Painted-501 Platinum MetallicFixed Column Leg Support: 501 Platinum Metallic



Components: A. (1) 24" x 48" x 72" Peninsula Top: SS244872WSUE-L3-P-STD-LMH-STD-B. (1) 24"x 48" Rectangular Work surface: SS2448WSS-L3-P-STD-LMH-STD-C. (1) 24" x 84" Rectangular Work surface: SS2484WSS-L3-STD-LMH-STD-D. (2) 48"W Overhead Storage-w/Hinged Door: B4819-H-L-S-N-KSB-STD-LMHE. (1) 48" W Tack Tile: Refer to Tack Fabric listed in "Finishes" aboveModel: 36P482ITASCF. (1) 48" W Tack Tile/Tool Rail Combo-TackModel Tack: 36P48H18ITASCModel Tool: 36P48H06ITSG. (1) Fixed Column Leg: AC2804SFB-STDM-501H (2) 30"W 2H Lateral File (below work surface) Model: FSL233027-L-ARC501-KSB-MHI. Vertical Storage: Refer to F.14 for specifications


Work Station WS-2Quantity: Refer to Furniture Plan





Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Square*Wire Manager Rim-all surfaces*PVC Edge-Matching*Undersurface Files-Laminate fronts/chassis*Under surface Storage Profile: Square*Overhead Storage-Laminate Chassis/Fronts, 19"H*Overhead Storage Profile: Square*Overhead Storage-Pull: Integrated*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing for necessary verticalcord management*Vertical Storage Profile: Square* Key individual offices alike, and each office differently* Where tool tile indicated, include $150.00 list per office for tool tile accessories* Accessories to be selected once contract is awarded to winning bidder.* Pulls: Arc Pull-501 Platinum Metallic

Finishes: Worksurfaces: LMH-Mocha Cherry LaminatePVC Edge: Dark ChocolateWire Manager: Dark ChocolateUnder surface storage: LMH Mocha CherryOverhead Storage: Laminate: LMH Mocha CherryTack Board Fabric: Grade A-Kimball, Pattern: Fusion, Color: 16105 MineralVertical Storage: Laminate: LMH Mocha CherryFixed Column Leg Support: 501 Platinum Metallic

Notes: *Bidders to verify swing of cabinet doors, and orientation of worksurfaces in

furniture plans*Face of all overhead storage to align with any adjacent storage components, includepricing for all necessary filler panels and/or leveling strips as requiredProvide fully adjustable articulating keyboard tray (KBT) with mouse pad whereindicated on plan.

Components: A. (1) 24" x 48" x 72" Peninsula Top: SS244872WSUE-L3-P-STD-LMH-STD-B. (1) 24"x 48" Rectangular Work surface: SS2448WSS-L3-P-STD-LMH-STD-C. (1) 24" x 84" Rectangular Work surface: SS2484WSS-L3-STD-LMH-STD-D.1 (2) 48" W Overhead Storage-Enclosed Shelves: B4819-E-L-S-STD-LMHD.2 (2) 48" W Overhead Storage w/Hinged Door: B4819-H-L-N-KSB-LMHE. (1) 48" W Tack Tile: Refer to Tack Fabric listed in "Finishes" above Model: 36P482ITASCF. (1) 48" W Tack Tile/Tool Rail Combo-Tack Model-Tack Tile: 36P48H18ITASC Model-Tool Stat Tile: 36P48H06ITSG. (1) Fixed Column Leg: AC2804SFB-STDM-501H.1 (1) 30"W 2H Lateral File (below work surface) Model: FSL233027-L-ARC501-KSB-MHH.2 (1) Box/Box File Pedestal (below work surface) Model: FSB2318-ARC501-KSB-MHI. Wardrobe (6-1/4"W x 68"H x 24"D) -Laminate Model: Refer to F.11 for specifications


Work Station WS-3-NOT USED


Work Surface WS-4Quantity: Refer to Furniture Plan


Type: Wall Mounted Work surface



Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Square*Wire Manager Rim*PVC Edge-Matching

Finishes: Worksurfaces: LMH-Mocha Cherry LaminatePVC Edge: Dark ChocolateWire Manager: Dark Chocolate

Notes: *Align Face of worksurface with adjacent vertical file storage. Include pricingfor all necessary filler panels and/or leveling strips as requiredProvide fully adjustable articulating keyboard tray (KBT) with mouse pad whereindicated on plan.

Components:A. (1) 18"x 54" Rectangular Work surface: SS1854WSS-L3-P-STD-MH-STD-


Work Surface WS-4




Type: Wall/Panel Mounted Office Furnishings

Style Name: Work Surfaces Footprint (or approved equal)Panels: Xsite (or approved equal)


Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Square*Wire Manager Rim-all surfaces*PVC Edge-Matching*Undersurface Files-Laminate fronts/chassis*Under surface Storage Profile: Square*Overhead Storage--Metal Chassis/Metal Front*Overhead Storage Profile: Lunar*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing for necessary verticalcord management*Vertical Storage Profile: Square* Where tool tile indicated, include $150.00 list per office for tool tile accessories* Accessories to be selected once contract is awarded to winning bidder.* Pulls: Arc Pull-501 Platinum Metallic* 42" H Non powered, Monolithic Panels, Tackable/Acoustical Tiles,* 49"H Non-Powered, Monolithic Panels, Tackable Acoustical Tiles+ 18" Glass Tile Stack*Top Caps: Curved Profile, Painted: 501 Platinum Metallic*Wireway Covers: 501 Platinum Metallic

Finishes: Worksurfaces: LMH-Mocha Cherry LaminatePVC Edge: Dark ChocolateWire Manager: Dark ChocolateUnder surface storage: LMH Mocha CherryOverhead Storage: Painted-501 Platinum MetallicTack Board Fabric: Grade A-Kimball, Pattern: Fusion, Color: 16105 MineralPanel Fabric: Grade B-Kimball, Pattern: Savile, Color: 25306 TwillVertical Storage: Painted-501 Platinum Metallic

Notes: *Bidders to verify swing of cabinet doors, and orientation of worksurfaces infurniture plans*Face/Height of all overhead storage to align with any adjacent storage components,include pricing for all necessary filler panels and/or leveling strips as requiredProvide fully adjustable articulating keyboard tray (KBT) with mouse pad whereindicated on plan.

Components: A. (1) 24"x 60" Rectangular Work surface (panel mounted):SS2460WSS-L3-P-STD-LMH-STD-B. (1) 24"x 48" Rectangular Work surface (panel mounted):SS2448WSS-L3-P-STD-LMH-STD-C. (1) 24" x 72" Rectangular Work surface (wall mounted): SS2472WSS-L3-STD-LMH-STD-D. (2) 36" W Lunar Overhead Storage Bin: 24S143614SOFM-KSB-STDM-501E. (1) 36" W Tack Tile: Refer to Tack Fabric listed in "Features" above Model 36P362ITASCF. (1) 36" W Tack Tile/Tool Rail Combo Model-Tack Tile: 36P36H18ITASC Model-Tool Stat Tile: 36P36H06ITSG. Not UsedH. (1) File/File Pedestal: FSF2318-ARC501-KSB-LMHI. (1) Vertical Storage Tower-Wardrobe with Box/Box File-24"D x 24"W x 66"H Model: Refer to F.7a for specificationsJ.1 (2) 30"W x 42"H Non-powered panel w/tackable-acoustical tiles-Refer to above for fabric Frame: 36P363F-N-NP2-STDM-501 Tile: 36P362ITASC-Refer to finishes for panel fabric selectionJ.2 (2) 48"W x 49"H Non-Powered panel w/tackable acoustical tiles-Refer to above for fabric with stacking glass tile Frame: 36P48H50F-N-NP2-STDM-501 Tile: 36P48H441TASC-Refer to finishes for panel fabric selection Glass Tile: 36P4818ITGAP-Clear GlassK. (1) 15"D x 60"W x 1-3/16"thk Transaction Top Model: SS15600WSTC-L-P-STD-LMH-STD


Work Station WS-5





Style Name: Work Surface: Footprint (or approved equal)Panels: Xsite Panels (or approved equal)


Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Square*Wire Manager Rim-all surfaces*PVC Edge-Matching*Undersurface Files-Laminate fronts/chassis*Under surface Storage Profile: Square*Overhead Storage-Metal Chassis/Metal Fronts*Overhead Storage Profile: Lunar*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing for necessaryvertical cord management* Pulls: Arc Pull-501 Platinum Metallic* Top Caps: Curved Profile, 501 Platinum Metallic* Non-Powered 30"H Panels w/laminate tiles

Finishes: Worksurfaces: LMH-Mocha Cherry LaminatePVC Edge: Dark ChocolateWire Manager: Dark ChocolateOverhead Storage: Painted-501 Platinum Metallic* Panels: Laminate Tile: LMH Mocha Cherry* Top Caps: Curved Profile, 501 Platinum Metallic

Notes: *Bidders to verify swing of cabinet doors, and orientation of worksurfaces infurniture plans*Face/Height of all overhead storage to align with any adjacentstorage components,include pricing for all necessary filler panels and/or leveling strips as requiredProvide fully adjustable articulating keyboard tray (KBT) with mouse pad where

indicated on plan.Components:

A. (1) 24"x 48" Rectangular Work surface wall mounted:SS2448WSS-L3-P-STD-LMH-STD-MH-B. (1) 48" W Lunar Overhead Storage Bin:24S144814SOFM-KSB-STDM-501 - wall mountedC. Shared Panels-24"D x 30"H Refer to furniture plan for location Frame: 36P242F-N-NP2-STD-501 Tile: Laminate-36P2421T-L-STD-MH


Work Station WS-6AQuantity: Refer to Furniture Plan



Style Name: Work Surface: Footprint (or approved equal)Panels: Xsite Panels (or approved equal)


Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Square*Wire Manager Rim-all surfaces*PVC Edge-Matching*Undersurface Files-Laminate fronts/chassis*Under surface Storage Profile: Square*Overhead Storage-Metal Chassis/Metal Fronts*Overhead Storage Profile: Lunar*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing fornecessary vertical cord management* Pulls: Arc Pull-501 Platinum Metallic* Top Caps: Curved Profile, 501 Platinum Metallic* Non-Powered 67"H Panels w/tackable acoustical tile

Finishes: Worksurfaces: LMH-Mocha Cherry LaminatePVC Edge: Dark ChocolateWire Manager: Dark ChocolateUnder surface storage: LMH Mocha CherryOverhead Storage: Painted-501 Platinum MetallicVertical Storage: Painted-501 Platinum Metallic* Panels: Fabric: Grade B-Kimball Pattern: Savile, Color: 25306 Twill* Top Caps: Curved Profile, 501 Platinum Metallic

Notes: *Bidders to verify swing of cabinet doors, and orientation of worksurfaces infurniture plans*Face/Height of all overhead storage to align with any adjacentstorage components,

include pricing for all necessary filler panels and/or leveling strips as requiredProvide fully adjustable articulating keyboard tray (KBT) with mouse pad whereindicated on plan.

Components:A. (1) 24"x 48" Rectangular Work surface: SS2448WSS-L3-P-STD-LMH-STD-MH- Note: Wall MountedB. (1) 48" W Lunar Overhead Storage Bin: 24S144814SOFM-KSB-STDM-501 Note: Wall MountedC. Shared Panels-24"D x 67"H-Refer to furniture plan for location Frame: 36P245F-N-NP2-STD-501 Tile: Fabric: 36P245ITASC-Refer to "features" for panel fabric





Style Name: Work Surface: Footprint (or approved equal)


Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Square*Wire Manager Rim-all surfaces*PVC Edge-Matching*Undersurface Files-Laminate fronts/chassis*Under surface Storage Profile: Square*Overhead Storage-Metal Chassis/Metal Fronts*Overhead Storage Profile: Lunar*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing fornecessary vertical cord management* Pulls: Arc Pull-501 Platinum Metallic

Finishes: Worksurfaces: LMH-Mocha Cherry LaminatePVC Edge: Dark ChocolateWire Manager: Dark ChocolateUnder surface storage: LMH Mocha CherryOverhead Storage: Painted-501 Platinum MetallicFile/File Pedestal: LMH Mocha CherryTack Tile: Grade A-Kimball, Pattern: Fusion 16105 Mineral

Notes: *Bidders to verify swing of cabinet doors, and orientation of worksurfaces infurniture plans*Face/Height of all overhead storage to align with any adjacentstorage components,include pricing for all necessary filler panels and/or leveling strips as requiredProvide fully adjustable articulating keyboard tray (KBT) with mouse pad whereindicated on plan.

Components:

A. (1) 24"x 60" Rectangular Work surface: SS2460WSS-L3-P-STD-LMH-STD-LMH- Note: Wall MountedB. (1) 18"D x 48"W Rectangular WorksurfaceSS1848WSS-L3-P-STD-LMH-STD-MH - wall mountedC. (1) 60" W Lunar Overhead Storage Bin: 24S146014SOFM-KSB-STDM-501 Note: Wall MountedD. (1) File/File Pedestal: FSF2318-ARC501-KSB-MHE. (1) 60"W Tack tile: Model: 36P602ITASC Refer to finishes for panel fabric selection





Style Name: Work Surface: Footprint (or approved equal)


Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Square*Wire Manager Rim-all surfaces*PVC Edge-Matching*Undersurface Files-Laminate fronts/chassis*Under surface Storage Profile: Square*Overhead Storage-Metal Chassis/Metal Fronts*Overhead Storage Profile: Lunar*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing fornecessary vertical cord management* Pulls: Arc Pull-501 Platinum Metallic

Finishes: Worksurfaces: LMH-Mocha Cherry LaminatePVC Edge: Dark ChocolateWire Manager: Dark ChocolateOverhead Storage: Painted-501 Platinum MetallicFile/File Pedestal: LMH Mocha Cherry

Notes: *Bidders to verify swing of cabinet doors, and orientation of worksurfaces infurniture plans*Face/Height of all overhead storage to align with any adjacentstorage components,include pricing for all necessary filler panels and/or leveling strips as requiredProvide fully adjustable articulating keyboard tray (KBT) with mouse pad whereindicated on plan.*Include (3) grommets

Components:A. (1) 24"x 108" Rectangular Work surface: SS24108WSS-L3-P-STD-LMH-STD-LMH-

Note: Wall MountedB. (3) 36" W Lunar Overhead Storage Bin: 24S143614SOFM-KSB-STDM-501 Note: Wall MountedC. (3) 36" W Open Shelves-Metal 15"D x 36"W x 16-5/8"H - mounted above overhead storage bins Model: IS143616OS-STDM-501D. (3) CPU Mount - refer to specification sheet A4 (Bid package 2 for information)E. (3) Articulating, Fully Adjustable Keyboard Tray (Recommend)F. Wall mounted, articulating monitor arm for dual monitor: Refer to A-11A





Style Name: Work Surface: Footprint (or approved equal)Panels: Xsite (or approved equal)


Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Square*Wire Manager Rim-all surfaces*PVC Edge-Matching*Undersurface Files-Laminate fronts/chassis*Under surface Storage Profile: Square*Overhead Storage-Metal Chassis/Metal Fronts*Overhead Storage Profile: Lunar*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing fornecessary vertical cord management* Pulls: Arc Pull-501 Platinum Metallic*42"H Non-Powered, Monolithic Panel w/Tackable Acoustical Tile, + 1 Glass Stack

Finishes: Worksurfaces: LMH-Mocha Cherry LaminatePVC Edge: Dark ChocolateWire Manager: Dark ChocolateUnder surface storage: LMH Mocha CherryOverhead Storage: Painted-501 Platinum MetallicBox/Box/File Pedestal: LMH Mocha CherryTack Tile: Grade A-Kimball, Pattern: Fusion 16105 MineralPanel Fabric: Grade B-Kimball, Pattern: Savile, 25306 TwillTop Caps: Curved Profile, Painted: 501 Platinum Metallic

Notes: *Bidders to verify swing of cabinet doors, and orientation of worksurfaces infurniture plans*Face/Height of all overhead storage to align with any adjacent

storage components,include pricing for all necessary filler panels and/or leveling strips as requiredProvide fully adjustable articulating keyboard tray (KBT) with mouse pad whereindicated on plan.

Components:A. (2) 24"x 72" Rectangular Work surface: SS2472WSS-L3-P-STD-LMH-STD-MH- Note: Panel MountedB. (4) 24"x 96" Rectangular Work surface: SS2496WSS-L3-P-STD-LMH-STD-MH- Note: Wall MountedC. (12) 36" W Open Shelves-Metal 15"D x 36"W x 16-5/8"H - mounted above overhead storage Model: IS143616OS-STDM-501D. (12) 36" W Lunar Overhead Storage Bin: 24S143614SOFM-KSB-STDM-501 Note: Wall MountedE. (4) Box/Box File Pedestal (below work surface) Model: FSB2318-ARC501-KSB-MHF. (4) Articulating, Fully Adjustable Keyboard Tray (Recommend)G. (4) 36"W Tack Tiles: Model: 36P362ITASC (Refer to "finishes" for tack fabric)H. (4) 36"W Tack/Slat Tool Tile Combo Model: Tack Tile-36P36H18ITASC Model: Slat Tile: 36P36H06ITS


Work Station WS-9







Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Square*Wire Manager Rim-all surfaces*PVC Edge-Matching*Undersurface Files-Laminate fronts/chassis*Under surface Storage Profile: Square*Overhead Storage-Metal Chassis/Metal Fronts*Overhead Storage Profile: Lunar*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing for necessary vertical cord management*Vertical Storage Profile: Square* Where tool tile indicated, include $150.00 list per office for tool tile accessories* Accessories to be selected once contract is awarded to winning bidder.* Pulls: Arc Pull-501 Platinum Metallic

Finishes: Worksurfaces: LMH-Mocha Cherry LaminatePVC Edge: Dark ChocolateWire Manager: Dark ChocolateUnder surface storage: LMH Mocha CherryOverhead Storage: Painted-501 Platinum MetallicTack Board Fabric: Grade A-Kimball, Pattern: Fusion, Color: 16105 MineralVertical Storage: Painted-501 Platinum MetallicFixed Column Leg Support: 501 Platinum Metallic



Components: A. (1) 24" x 48" x 72" Peninsula Top: SS244872WSUE-L3-P-STD-LMH-STD-B. (1) 24"x 48" Rectangular Work surface: SS2448WSS-L3-P-STD-LMH-STD-C. (1) 24" x 78" Rectangular Work surface: SS2478WSS-L3-STD-LMH-STD-D. (2) 48" W Lunar Overhead Storage Bin: 24S144814SOFM-KSB-STDM-501E. (1) 48" W Tack Tile: Refer to Tack Fabric listed in "Finishes" above Model: 36P482ITASCF. (1) 48"W Tack/Slat Tool Tile Combo Model: Tack Tile-36P36H18ITASC Model: Slat Tile: 36P36H06ITSG. (1) Fixed Column Leg: AC2804SFB-STDM-501H (2) 30"W 2H Lateral File (below work surface) Model: FSL233027-L-ARC501-KSB-MHI. Vertical Storage: Refer to F.11A/F14 for specifications




Type: Panel Mounted Office Furnishings

Style Name: Work Surface: Footprint (or approved equal)Panels: Xsite (or approved equal)


Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Square*Wire Manager Rim-all surfaces*PVC Edge-Matching*Undersurface Files-Laminate fronts/chassis*Under surface Storage Profile: Square* Pulls: Arc Pull-501 Platinum Metallic*49"H Powered, Monolithic Panel w/Tackable Acoustical Tile

Finishes: Worksurfaces: LMH-Mocha Cherry LaminatePVC Edge: Dark ChocolateWire Manager: Dark ChocolateUnder surface storage: LMH Mocha Cherry LaminateBox/Box/File Pedestal: LMH Mocha Cherry LaminatePanel Fabric: Grade B-Kimball, Pattern: Savile, 25306 TwillTop Caps: Curved Profile, Painted: 501 Platinum Metallic

Notes: *Bidders to verify swing of cabinet doors, and orientation of worksurfaces infurniture plans*Face/Height of all overhead storage to align with any adjacentstorage components,include pricing for all necessary filler panels and/or leveling strips as requiredProvide fully adjustable articulating keyboard tray (KBT) with mouse pad whereindicated on plan.

Components:A. (1) 24"x 72" Rectangular Work surface: SS2472WSS-L3-P-STD-LMH-STD-MH- Note: Panel MountedB. (1) 24"x 48" Rectangular Work surface with end panel: SS2448WSS-L3-P-STD-LMH-STD-MH- Note: Panel MountedC. (1) Box/Box File Pedestal (below work surface) Model: FSB2318-ARC501-KSB-MHD. (4) 36"W x 49"H Powered Monolithic Panel, Tackable/Acoustical Tile (Refer to "finishes" above for panel fabric) Frame: 36P363F-P-10D-PD2-STDM-501 Tile: 36P363ITASCF. Fully Adjustable, Articulating, Keyboard Tray (Recommend)




Type: Freestanding Mounted Work surface



Features: *1-3/16 Laminate Work surfaces, freestanding* Worksurface Profile: Square*PVC Edge-Matching

Finishes: Worksurfaces: 488 Frosty WhitePVC Edge: to match

Notes: Include pricingfor all necessary filler panels and/or leveling strips as requiredProvide fully adjustable articulating keyboard tray (KBT) with mouse pad whereindicated on plan.Include pricing for (1) grommet

Components:A. (1) 24"x 72" Rectangular Work surface: SS2472WSS-L3-P-STD-LMH-STD- Include pricing for single grommet-center on top edge of work surface - freestandingB. Mobile, Box/File Pedestal-With Cushion Top: Refer to F-12 for Specifications


Work Surface WS-12







Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Square*Wire Manager Rim-all surfaces*PVC Edge-Matching*Undersurface Files-Laminate fronts/chassis*Under surface Storage Profile: Square*Overhead Storage-Laminate Chassis/Fronts, 19"H*Overhead Storage Profile: Square*Overhead Storage-Pull: Integrated*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing for necessary vertical cord management*Vertical Storage Profile: SquareVertical Storage: Wood front/ metal chassis* Key individual offices alike, and each office differently* Where tool tile indicated, include $150.00 list per office for tool tile accessories* Accessories to be selected once contract is awarded to winning bidder.* Pulls: Arc Pull-501 Platinum Metallic

Finishes: Worksurfaces: LMH-Mocha Cherry LaminatePVC Edge: Dark ChocolateWire Manager: Dark ChocolateUnder surface storage: LMH Mocha Cherry LaminateOverhead Storage: Laminate: MH Mocha CherryVertical Storage: Metal chassis wood front MH Mocha CherryFixed Column Leg Support: 501 Platinum Metallic


furniture plans*Face of all overhead storage to align with any adjacent storage components,include pricing for all necessary filler panels and/or leveling strips as requiredProvide fully adjustable articulating keyboard tray (KBT) with mouse pad whereindicated on plan.

Components: A. (1) Oval Table: 43 1/4" x 82 3/4" x 27 1/2" Elliptical top/baseModel: AS4383ELW-S-F-STD-LMH-497; static, mocha cherry top, softened edgePolished aluminum 497 baseB. (2) 24"x 96" Rectangular Work surface: SS2496WSS-L3-P-STD-LMH-STD-C. (2) 36"W Overhead Storage-w/Hinged Door: B3619-H-L-S-N-KSB-STD-LMHD. (1) 48"W Overhead Storage-Enclosed Shelves: B4819-E-L-S-STD-LMHE. (2) File/File Pedestals: FSF2318-L-ARC501-KSB-STD-MHF. (1) 30" W 2H Lateral File (below work surface): FSL233027-L-ARC501-KSB-STD-MHG. Vertical Storage: w/File/File, Refer to F-7 for specifications, Finished Back Model: FFBR2468-L-ARC501-KSB-STD-MHNote: No Tack Tiles or Tool Tiles/Accessories Requested




Type: Wall Mounted/Freestanding Office Furnishings



Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Square*Wire Manager Rim-all surfaces*PVC Edge-Matching*Undersurface Files-Laminate fronts/chassis*Under surface Storage Profile: Square*Overhead Storage-Laminate Chassis/Fronts, 19"H*Overhead Storage Profile: Square*Overhead Storage-Pull: Integrated*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing for necessary vertical cord management*Vertical Storage Profile: SquareVertical Storage: Wood front/ metal chassis* Key individual offices alike, and each office differently* Where tool tile indicated, include $150.00 list per office for tool tile accessories* Accessories to be selected once contract is awarded to winning bidder.* Pulls: Arc Pull-501 Platinum Metallic

Finishes: Worksurfaces: LMH-Mocha Cherry LaminatePVC Edge: Dark ChocolateWire Manager: Dark ChocolateUnder surface storage: LMH Mocha Cherry LaminateOverhead Storage: Laminate: MH Mocha CherryTack Board Fabric: Grade A-Kimball, Pattern: Fusion, Color: 16105 MineralVertical Storage: MH Mocha CherryFixed Column Leg Support: 501 Platinum Metallic

Notes: *Bidders to verify swing of cabinet doors, and orientation of worksurfaces infurniture plans*Face of all overhead storage to align with any adjacent storage components, includepricing for all necessary filler panels and/or leveling strips as requiredProvide fully adjustable articulating keyboard tray (KBT) with mouse pad whereindicated on plan.

Components: A. 72"W x 36"D Arc Front Desk-Freestanding, includes Box/Box File and File/File PedestalsB. (1) 24"x 108" Rectangular Work surface: SS24108WSS-L3-P-STD-LMH-STD-C. (3) 36"W Overhead Storage-w/Hinged Door: B3619-H-L-S-N-KSB-STD-LMHF. (3) 36" W 2H Lateral File (below work surface):FSL233027-L-ARC501-KSB-STD-LMHG. Vertical Storage: w/File/File, Refer to F-7 for specifications, Finished Back Model: FFBR2468-L-ARC501-KSB-STD-LMHI. (3) 36"W Tack Tiles: Model: 36P362ITASC (Refer to "finishes" for tack fabric)J. Round Table 48" Diameter: Kimball Footprint- 1 3/16" top thickness; PVC rimLaminate:LMH Mocha Cherry; model- (top) SS48TTRNL-P-STD-LMH(base): 16" wood mocha cherry- MH- AB32G-STD-MH







Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Square*Wire Manager Rim-all surfaces*PVC Edge-Matching*Undersurface Files-Laminate fronts/chasis*Under surface Storage Profile: Square*Overhead Storage-Laminate Chasis/Fronts, 19"H*Overhead Storage Profile: Square*Overhead Storage-Pull: Integrated*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing for necessary vertical cord management*Vertical Storage Profile: SquareVertical Storage: Wood front/ metal chassis* Key individual offices alike, and each office differently* Where tool tile indicated, include $150.00 list per office for tool tile accessories* Accessories to be selected once contract is awarded to winning bidder.* Pulls: Arc Pull-501 Platinum Metallic

Finishes: Worksurfaces: LMH-Mocha Cherry LaminatePVC Edge: Dark ChocolateWire Manager: Dark ChocolateUnder surface storage: LMH Mocha Cherry LaminateOverhead Storage: Laminate: LMH Mocha CherryTack Board Fabric: Grade A-Kimball, Pattern: Fusion, Color: 16105 MineralVertical Storage: Wood: MH Mocha CherryFixed Column Leg Support: 501 Platinum Metallic

Notes: *Bidders to verify swing of cabinet doors, and orientation of worksurfaces infurniture plans*Face of all overhead storage to align with any adjacent storage components,include pricing for all necessary filler panels and/or leveling strips as requiredProvide fully adjustable articulating keyboard tray (KBT) with mouse pad whereindicated on plan.

Components: A. (1) Oval Table: 43 1/4" x 82 3/4" x 27 1/2" Elliptical top/baseModel: AS4383ELW-S-F-STD-LMH-497; static, mocha cherry top, softened edgePolished aluminum 497 baseB. (2) 24"x 96" Rectangular Work surface: SS2496WSS-L3-P-STD-LMH-STD-C. (2) 60"W Overhead Storage-w/Hinged Door: B6019-H-L-S-N-KSB-STD-LMHE. (2) File/File Pedestals: FSF2318-L-ARC501-KSB-STD-LMHF. (1) 30" W 2H Lateral File (below work surface):FSL233027-L-ARC501-KSB-STD-LMHG. Vertical Storage: w/File/File, Finished Back Model: Refer to F.7 for SpecificationsI. (1) 60"W Tack Tiles: Model: 36P602ITASC (Refer to "finishes" for tack fabric)J. (1) 60"W Tack/Slat Tool Tile Combo Model: Tack Tile-36P60H18ITASC Model: Slat Tile: 36P60H06ITS







Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Square*Wire Manager Rim-all surfaces*PVC Edge-Matching*Undersurface Files-Laminate fronts/chassis*Under surface Storage Profile: Square*Overhead Storage-Laminate Chassis/Fronts, 19"H*Overhead Storage Profile: Square*Overhead Storage-Pull: Integrated*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing for necessary verticalcord managementVertical Storage: Wood front/ metal chassis* Key individual offices alike, and each office differently* Where tool tile indicated, include $150.00 list per office for tool tile accessories* Accessories to be selected once contract is awarded to winning bidder.* Pulls: Arc Pull-501 Platinum Metallic

Finishes: Worksurfaces: LMH-Mocha Cherry LaminatePVC Edge: Dark ChocolateWire Manager: Dark ChocolateUnder surface storage: LMH Mocha Cherry LaminateOverhead Storage: Laminate: LMH Mocha CherryTack Board Fabric: Grade A-Kimball, Pattern: Fusion, Color: 16105 MineralVertical Storage: MH Mocha CherryFixed Column Leg Support: 501 Platinum Metallic


furniture plans*Face of all overhead storage to align with any adjacent storage components, includepricing for all necessary filler panels and/or leveling strips as requiredProvide fully adjustable articulating keyboard tray (KBT) with mouse pad whereindicated on plan.

Components: A. (1) 24" x 48" x 72" Peninsula Top: SS244872WSUE-L3-P-STD-LMH-STD-B. (1) 24"x 48" Rectangular Work surface: SS2448WSS-L3-P-STD-LMH-STD-C. (1) 24" x 84" Rectangular Work surface: SS2484WSS-L3-P-STD-LMH-STD-D. (3) 36"W Overhead Storage w/Hinged Door: B3619-H-L-N-KSB-LMHE. (1) File/File Pedestal (below work surface): FSF2318-ARC501-KSB-LMHF. (1) Fixed Column Leg: AC2804SFB-STDM-501G. (1) 30"W 2H Lateral File (below work surface) Model: FSL233027-L-ARC501-KSB-LMHH. Vertical Storage: w/File/File, Finished Back Model: Refer to F.7 for SpecificationsJ. (2) 36"W Tack Tiles: Model: 36P362ITASC (Refer to "finishes" for tack fabric)K. (1) 36"W Tack/Slat Tool Tile Combo Model: Tack Tile-36P36H18ITASC Model: Slat Tile: 36P36H06ITSL. Round Table 48" Diameter: Kimball Footprint- 1 3/16" top thickness; PVC rimLaminate:LMH Mocha Cherry; model- (top) SS48TTRNL-P-STD-LMH(base): 16" wood mocha cherry- MH- AB32G-STD-MH







Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Square*Wire Manager Rim-all surfaces*PVC Edge-Matching*Undersurface Files-Laminate fronts/chasis*Under surface Storage Profile: Square*Overhead Storage-Laminate Chasis/Fronts, 19"H*Overhead Storage Profile: Square*Overhead Storage-Pull: Integrated*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing for necessarynecessary vertical cord management*Vertical Storage Profile: SquareVertical Storage: Wood front/ metal chassis* Key individual offices alike, and each office differently* Where tool tile indicated, include $150.00 list per office for tool tile accessories* Accessories to be selected once contract is awarded to winning bidder.* Pulls: Arc Pull-501 Platinum Metallic

Finishes: Worksurfaces: LMH-Mocha Cherry LaminatePVC Edge: Dark ChocolateWire Manager: Dark ChocolateUnder surface storage: LMH Mocha Cherry LaminateOverhead Storage: Laminate: LMH Mocha CherryTack Board Fabric: Grade A-Kimball, Pattern: Fusion, Color: 16105 MineralVertical Storage: MH Mocha CherryFixed Column Leg Support: 501 Platinum Metallic


Components: A. (1) Oval Table: 43 1/4" x 82 3/4" x 27 1/2" Elliptical top/baseModel: AS4383ELW-S-F-STD-LMH-497; static, mocha cherry top, softened edgePolished aluminum 497 baseB. (2) 24"x 96" Rectangular Work surface: SS2496WSS-L3-P-STD-LMH-STD-C. (2) 60"W Overhead Storage w/Enclosed Shelves:B6019-E-L-S-STD-LMH-STD-LMHE. (1) File/File Pedestals: FSF2318-L-ARC501-KSB-STD-MHF. (2) 30" W 2H Lateral File (below work surface):FSL233027-L-ARC501-KSB-STD-LMHG. Vertical Storage: w/File/ File, Finished Back Model: Refer to F.7 for SpecificationsI. Cubby Storage - Between worksurface and overhead storage



Manufacturer: First Office (or approved equal)

Type: Freestanding Office Furnishings

Style Name: Woodbridge


Features: *1.125" thick work surfaces*Surfaces have solid hardwood rims*Hardware: Antique Brass*Wire Management-Stnd*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing for necessarynecessary vertical cord management* Key individual offices alike, and each office differently

Finishes: Wood: MLW Legacy Walnut on Walnut


Components: A. (1) 72" Double Pedestal Desk 60-7236DP (Chasis: 29"D x 64"W)Desk includes: *Pull writing slides

*(2) box file drawers*(2) file drawers* Center drawer*Central Locking System*Adjustable Levelers*7.5" overhang*31.75" knee space*Molding: NH w/molding*Grommet: G5 Right

B. (1) Lateral File Kneespace Credenza-M60-12Credenza includes: *G3 Center grommet

*(2) Lateral Files 60-29-36TDF (28.75"W x 21.5"D x25.5"H)*(1) Credenza Top 60-2926TDF (89"W x 21.5"D x 1.125")*(2) Credenza Base 60-3021 (29.75"W x 21.5"D x 3.75")

C. (1) High Back Organizer 60-9049HPOrganizer includes: * 6 hinged doors

*Wood panel inserts*Wire management*Include pricing for task light*LX Finished Back

D. (1) 72" W x 36"D Conference Table: #60-7236RT-19 Rectangular shaped1.125" thick top; Queen Anne Base: QB-36E. (2) Single Hutch w/Lateral File Unit (Refer to F-5a for Specifications)F. (1) 24" Diameter Round: OFS Harmony Lounge- Queen Anne PedestalTable: TT-25QPT; 1" thick straight grain veneer top profiled sidesFinish: MLW legacy walnut




Type: Freestanding Office Furnishings

Style Name: Woodbridge


Features: *1.125" thick work surfaces*Surfaces have solid hardwood rims*Hardware: Antique Brass*Wire Management-Stnd*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing for necessarynecessary vertical cord management* Key individual offices alike, and each office differently

Finishes: Wood: MLW Legacy Walnut on Walnut


Components: A. (1) 72" Left Pedestal Desk 60-7236LPD (Chassis: 29"D x 64"W)Desk includes: *Pull writing slides

*(1) box file drawers*(1) file drawers* Center drawer*Central Locking System*Adjustable Levelers*7.5" overhang*31.75" knee space*Molding: NH w/molding (typical all components)*Grommet: G5 Right

B. (1) Bridge 60-2248BR (22"D x 48"W x 1.125" thick)Bridge Includes: *G3 Grommet

*Adjustable Levelers

C. Credenza-60-7222CRRCredendza Includes: *1-Box drawer

*1-File drawer*Locking Pedestal*G3 Grommet*Adjustable Levelers

D. Highback Organizer-60-9049HDP (89"W x 15.375"D x 49.25"H)Organizer includes: *Wood Panel inserts-6 hinged doors

*Wire Management*Task Light*LW-Unfinished back

E. Tackboard-FT1015 (84"W x 23.8125"H)*COM Fabric: Grade A Kimball-Pattern Fusion, Color: Mineral

F. 4H Lateral Files (wood): Refer to F.24 for specifcations




Type: Wall Mounted/Freestanding Office Furnishings



Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Square*Wire Manager Rim-all surfaces*PVC Edge-Matching*Undersurface Files-Laminate fronts/chasis*Under surface Storage Profile: Square*Overhead Storage-Laminate Chasis/Fronts, 19"H*Overhead Storage Profile: Square*Overhead Storage-Pull: Integrated*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing for necessarynecessary vertical cord management*Vertical Storage Profile: Square*Vertical Storage-Laminate Chasis/Front* Key individual offices alike, and each office differently* Where tool tile indicated, include $150.00 list per office for tool tile accessories* Accessories to be selected once contract is awarded to winning bidder.* Pulls: Arc Pull-501 Platinum Metallic

Finishes: Worksurfaces: LMH-Mocha Cherry LaminatePVC Edge: Dark ChocolateWire Manager: Dark ChocolateUnder surface storage: LMH Mocha CherryOverhead Storage: Laminate: LMH Mocha CherryTack Board Fabric: Grade A-Kimball, Pattern: Fusion, Color: 16105 MineralVertical Storage: MH Mocha CherryFixed Column Leg Support: 501 Platinum Metallic


Components: A. (1) 72"W x 24"D Freestanding Worksurface w/Full Modesty PanelB. (1) 24"x 36" Rectangular Work surface:SS236WSS-L3-P-STD-LMH-STD- wall mountedC. (1) 24"x 72" Rectangular Work surface:SS272WSS-L3-P-STD-LMH-STD- wall mountedD. (1) 36"W Overhead Storage-w/Hinged Door: B3619-H-L-S-N-KSB-STD-LMHE. (1) 36'W Overhead Storage-Enclosed Shelves: B3619-E-L-S-STD-LMHF. (1) Box/Box/File Pedestal (below work surface): FSB-L-2318-ARC501-KSB-LMHF. (1) 30" W 2H Lateral File (below work surface):FSL233027-L-ARC501-KSB-STD-LMHG. Vertical Storage: Refer to F.14 for SpecificationsI. (2) 36"W Tack Tiles: Model: 36P362ITASC (Refer to "finishes" for tack fabric)





Style Name: Work SurfacesFootprint (or approved equal)Panels: Xsite (or approved equal)


Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Square*Wire Manager Rim-all surfaces*PVC Edge-Matching*Undersurface Files-Laminate fronts/chasis*Under surface Storage Profile: Square*Overhead Storage--Laminate Chasis/Front*Overhead Storage Profile: Square*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing for necessary vertical cord management*Vertical Storage Profile: Square* Where tool tile indicated, include $150.00 list per office for tool tile accessories* Accessories to be selected once contract is awarded to winning bidder.* Pulls: Arc Pull-501 Platinum Metallic* 42" H Non powered, Monolithic Panels, Laminate Tiles,*Top Caps: Curved Profile, Painted: 501 Platinum Metallic*Wireway Covers: 501 Platinum Metallic

Finishes: Worksurfaces: LMH-Mocha Cherry LaminatePVC Edge: Dark ChocolateWire Manager: Dark ChocolateUnder surface storage: LMH Mocha CherryOverhead Storage: LMH Mocha CherryTack Board Fabric: Grade A-Kimball, Pattern: Fusion, Color: 16105 MineralPanel Laminate: LMH-Mocha CherryVertical Storage: Painted-501 Platinum Metallic


Components: A. (1) 24"x 72" Rectangular Work surface (panel mounted):SS2472WSS-L3-P-STD-LMH-STD-B. (1) 24"x 48" Rectangular Work surface: (confirm wall/DIRTT wall in plan) Model: SS2448WSS-L3-P-STD-LMH-STD-C. (1) 24" x 72" Rectangular Work surface (wall mounted):SS2472WSS-L3-STD-LMH-STD-D. (1) 36"W Overhead Storage Enclosed Shelves: B3619-E-L-S-STD-LMHE. (1) 36"W Overhead Storage w/Hinged Doors: B3619-H-L-N-KSB-STD-LMHF. (1) 36" Tack Tile: 36P362ITASC (Refer to tack fabric in "finishes" for info)G. (1) 36" W Tack Tile/Tool Rail Combo-Tack: 12"H, Tool Bar 6" Model-Tack Tile: 36P36H18ITASC Model-Tool Stat Tile: 36P36H06ITSH. (1) 2H 30"W Lateral File (below work surface):FSL-233027-L-ARC501-KSB-STD-LMHI. (1) File/File Pedestal: FSB2318-ARC501-KSB-LMHJ. (1) Vertical Storage Tower-Wardrobe with File/File-24"D x 24"W x 66"H Model: Refer to F.7a for specificationsK. (2) 36"W x 42"H Non-powered panel w/laminate tiles Frame: 36P363F-N-NP2-STDM-501 Tile: 36P363IT-L-STD-LMH


Components: A. (1) 24"x 72" Rectangular Work surface (panel mounted):SS2472WSS-L3-P-STD-LMH-STD-B. (1) 24"x 48" Rectangular Work surface: (confirm wall/DIRTT wall in plan) Model: SS2448WSS-L3-P-STD-LMH-STD-C. (1) 24" x 72" Rectangular Work surface (wall mounted):SS2472WSS-L3-STD-LMH-STD-D. (Not Used)E. (2) 36"W Overhead Storage w/Hinged Doors: B3619-H-L-N-KSB-STD-LMHF. (1) 36" Tack Tile: 36P362ITASC (Refer to tack fabric in "finishes" for info)G. (1) 36" W Tack Tile/Tool Rail Combo-Tack: 12"H, Tool Bar 6" Model-Tack Tile: 36P36H18ITASC Model-Tool Stat Tile: 36P36H06ITSH. (1) 2H 30"W Lateral File (below work surface):FSL-233027-L-ARC501-KSB-STD-LMHI. (1) File/File Pedestal: FSB2318-ARC501-KSB-LMHJ. (1) Vertical Storage Tower-Wardrobe with File/File-24"D x 24"W x 66"H Model: Refer to F.7a for specificationsK. (2) 36"W x 42"H Non-powered panel w/laminate tiles Frame: 36P363F-N-NP2-STDM-501 Tile: 36P363IT-L-STD-LMH


Components: A. (1) 24"x 72" Rectangular Work surface (panel mounted):SS2472WSS-L3-P-STD-LMH-STD-B. (1) 24"x 48" Rectangular Work surface: (confirm wall/DIRTT wall in plan) Model: SS2448WSS-L3-P-STD-LMH-STD-C. (1) 24" x 72" Rectangular Work surface (wall mounted):SS2472WSS-L3-STD-LMH-STD-D. Not UsedE. (2) 36"W Overhead Storage w/Hinged Doors: B3619-H-L-N-KSB-STD-LMHF. (1) 36" Tack Tile: 36P362ITASC (Refer to tack fabric in "finishes" for info)G. (1) 36" W Tack Tile/Tool Rail Combo-Tack: 12"H, Tool Bar 6" Model-Tack Tile: 36P36H18ITASC Model-Tool Stat Tile: 36P36H06ITSH. (1) 2H 30"W Lateral File (below work surface):FSL-233027-L-ARC501-KSB-STD-LMHI. (1) Mobile Ped File: w/cushion top: Refer to MP-1A for specifcationsJ. (1) Vertical Storage Tower-Wardrobe with File/File-24"D x 24"W x 66"H Model: Refer to F.7a for specificationsK. (2) 36"W x 42"H Non-powered panel w/laminate tiles Frame: 36P363F-N-NP2-STDM-501 Tile: 36P363IT-L-STD-LMH


Components: A. (1) 24"x 72" Rectangular Work surface (panel mounted):SS2472WSS-L3-P-STD-LMH-STD-B. (1) 24"x 48" Rectangular Work surface: (confirm wall/DIRTT wall in plan) Model: SS2448WSS-L3-P-STD-LMH-STD-C. (1) 24" x 72" Rectangular Work surface (wall mounted):SS2472WSS-L3-STD-LMH-STD-D. Not UsedE. (2) 36"W Overhead Storage w/Hinged Doors: B3619-H-L-N-KSB-STD-LMHF. (2) 36" W Tack Tile/Tool Rail Combo-Tack: 12"H, Tool Bar 6" Model-Tack Tile: 36P36H18ITASC Model-Tool Stat Tile: 36P36H06ITSG. (1) 2H 30"W Lateral File (below work surface):FSL-233027-L-ARC501-KSB-STD-LMHH. (1) Mobile Ped File: w/cushion top: Refer to MP-1A for specifcationsI. (1) Vertical Storage Tower-Wardrobe with File/File-24"D x 24"W x 66"H Model: Refer to F.7a for specificationsJ.1 (2) 36"W x 42"H Non-powered panel w/laminate tiles Frame: 36P363F-N-NP2-STDM-501 Tile: 36P363IT-L-STD-LMHK. Transaction Top: 15"D x 72"W x 1-3/16" thick Model: SS1572WSTC-L-P-STD-LMH







Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Square*Wire Manager Rim-all surfaces*PVC Edge-Matching*Undersurface Files-Laminate fronts/chasis*Under surface Storage Profile: Square*Overhead Storage--Laminate Chasis/Front*Overhead Storage Profile: Square*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing for necessary verticalcord management*Vertical Storage Profile: Square* Where tool tile indicated, include $150.00 list per office for tool tile accessories* Accessories to be selected once contract is awarded to winning bidder.* Pulls: Arc Pull-501 Platinum Metallic* 42" H Non powered, Monolithic Panels, Laminate Tiles,*Top Caps: Curved Profile, Painted: 501 Platinum Metallic*Wireway Covers: 501 Platinum Metallic



Components: A. (1) 24"x 72" Rectangular Work surface (confirm wall/DIRTT wall mounted): Model: SS2472WSS-L3-P-STD-LMH-STD-B. (1) 24"x 48" Rectangular Work surface: (confirm wall/DIRTT wall in plan) Model: SS2448WSS-L3-P-STD-LMH-STD-C. (1) 24" x 96" Rectangular Work surface (wall mounted):SS2496WSS-L3-STD-LMH-STD-D. (1) 24"W Overhead Storage w/vertical paper management slots:(24"W x 16"D x 19"H) Laminate ChassisE. (2) 36"W Overhead Storage w/Hinged Doors: B3619-H-L-N-KSB-STD-LMHF. (1) 48" Tack Tile: 36P482ITASC (Refer to tack fabric in "finishes" for info)G. (1) 48" W Tack Tile/Tool Rail Combo-Tack: 12"H, Tool Bar 6" Model-Tack Tile: 36P48H18ITASC Model-Tool Stat Tile: 36P48H06ITSH. (1) 2H 30"W Lateral File (below work surface):FSL-233027-L-ARC501-KSB-STD-LMHI. (1) File/File Pedestal (below w. surface) FSF-2318-L-ARC501-KSB-STD-LMHJ. (1) Vertical Storage Tower-Wardrobe with File/File-24"D x 24"W x 66"H Model: Refer to F.7a for specificationsL. Mobile Pedestal Box/File w/cushion top Model: Refer to MP-1 for specifcations







Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Square*Wire Manager Rim-all surfaces*PVC Edge-Matching*Undersurface Files-Laminate fronts/chasis*Under surface Storage Profile: Square*Overhead Storage-Laminate Chasis/Fronts, 19"H*Overhead Storage Profile: Square*Overhead Storage-Pull: Integrated*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing for necessary verticalcord management*Vertical Storage Profile: Square*Vertical Storage-Laminate Chasis/Front* Key individual offices alike, and each office differently* Where tool tile indicated, include $150.00 list per office for tool tile accessories* Accessories to be selected once contract is awarded to winning bidder.* Pulls: Arc Pull-501 Platinum Metallic*Bookcase: Laminate

Finishes: Worksurfaces: LMH-Mocha Cherry LaminatePVC Edge: Dark ChocolateWire Manager: Dark ChocolateUnder surface storage: LMH Mocha CherryOverhead Storage: Laminate: LMH Mocha CherryTack Board Fabric: Grade A-Kimball, Pattern: Fusion, Color: 16105 MineralVertical Storage: Wood front/ metal chassis MH Mocha CherryFixed Column Leg Support: 501 Platinum MetallicBookcase: LMH Mocha Cherry


Components: A. (1) Oval Table: 43 1/4" x 82 3/4" x 27 1/2" Elliptical top/baseModel: AS4383ELW-S-F-STD-LMH-497; static, mocha cherry top, softened edgePolished aluminum 497 baseB. (1) 24"x 96" Rectangular Work surface: SS2496WSS-L3-P-STD-MH-STD-C. (1) 24"x 120" Rectangular Work surface: SS24120WSS-L3-P-STD-MH-STD-D. (2) 72"W Overhead Storage-w/Hinged Door: B7219-H-L-S-N-KSB-STD-MHE. (2) File/File Pedestals: FSF2318-L-ARC501-KSB-STD-MHF. (1) 30" W 2H Lateral File (below work surface): FSL233027-L-ARC501-KSB-STD-MHG. Vertical Storage: w/File/ File/wardrobe, Finished Back Model: Refer to F.7 for specifcationsNote: No Tack Tiles or Tool Tiles/Accessories RequestedH. Small Round table 18" diameter: refer to OT-3 for specificationsI. Bookcase: 13"D x 30"Wx 67.5"H; model: ARC3068-L-STD-LMH







Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile:Square*PVC Edge-Matching*Undersurface Files-Laminate fronts/chasis*Under surface Storage Profile: Square*Overhead Storage-Laminate Chasis/Fronts*Overhead Storage Profile: Square*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing for necessary vertical cord management*Vertical Storage Profile: Square* Where tool tile indicated, include $150.00 list per office for tool tile accessories* Accessories to be selected once contract is awarded to winning bidder.* Pulls: Arc Pull-501 Platinum Metallic

Finishes: Worksurfaces: LMH-Mocha Cherry LaminatePVC Edge: Dark ChocolateWire Manager: Dark ChocolateUnder surface storage: LMH Mocha CherryOverhead Storage: LMH Mocha CherryTack Board Fabric: Grade A-Kimball, Pattern: Fusion, Color: 16105 MineralVertical Storage: MH Mocha CherryFixed Column Leg Support: 501 Platinum Metallic



Components: A. (1) 24" x 48" x 72" Peninsula Top: SS244872WSUE-L3-P-STD-LMH-STD-B. (1) 24"x 48" Rectangular Work surface: SS2448WSS-L3-P-STD-LMH-STD-C. (1) 24" x 72" Rectangular Work surface: SS2472WSS-L3-STD-LMH-STD-D. (2) 48"W Overhead Storage w/Hinged Doors: B3619-H-L-N-KSB-STD-LMHE. (1) 48" W Tack Tile: Refer to Tack Fabric listed in "Finishes" aboveModel: 36P482ITASCF. (1) 48" W Tack Tile/Tool Rail Combo-TackModel Tack: 36P48H18ITASCModel Tool: 36P48H06ITSG. (1) Fixed Column Leg: AC2804SFB-STDM-501H (1) 30"W 2H Lateral File (below work surface) Model: FSL233027-L-ARC501-KSB-MHI. (1) Box/Box/File Pedestal: FSB2318-ARC501-KSB-LMHJ. Vertical Storage: Refer to F.11 for specifications







Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Squares*Wire Manager Rim-all surfaces*PVC Edge-Matching*Undersurface Files-Laminate fronts/chasis*Under surface Storage Profile: Square*Overhead Storage-Laminate Chasis/Fronts*Overhead Storage Profile: Square*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing for necessary vertical cord management*Vertical Storage Profile: Square* Where tool tile indicated, include $150.00 list per office for tool tile accessories* Accessories to be selected once contract is awarded to winning bidder.* Pulls: Arc Pull-501 Platinum Metallic

Finishes: Worksurfaces: LMH-Mocha Cherry LaminatePVC Edge: Dark ChocolateWire Manager: Dark ChocolateUnder surface storage: LMH Mocha CherryOverhead Storage: LMH Mocha CherryTack Board Fabric: Grade A-Kimball, Pattern: Fusion, Color: 16105 MineralVertical Storage: Laminate: LMH Mocha CherryFixed Column Leg Support: 501 Platinum Metallic



Components: A. (1) 24" x 48" x 72" Peninsula Top: SS244872WSUE-L3-P-STD-LMH-STD-B. (1) 24"x 54" Rectangular Work surface: SS2454WSS-L3-P-STD-LMH-STD-C. (1) 24" x 72" Rectangular Work surface: SS2472WSS-L3-STD-LMH-STD-D. (3) 48"W Overhead Storage w/Hinged Doors: B4819-H-L-N-KSB-STD-LMHE. (1) 72" W Tack Tile: Refer to Tack Fabric listed in "Finishes" aboveModel: 36P722ITASCF. (1) 72" W Tack Tile/Tool Rail Combo-TackModel Tack: 36P72H18ITASCModel Tool: 36P72H06ITSG. (1) Fixed Column Leg: AC2804SFB-STDM-501H (2) 30"W 2H Lateral File (below work surface) Model: FSL233027-L-ARC501-KSB-MHI. Vertical Storage: Refer to F.11 for specificationsJ. Lateral file: Refer to F.1/F1.L.30 for specifications







Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Square*Wire Manager Rim-all surfaces*PVC Edge-Matching*Undersurface Files-Laminate fronts/chasis*Under surface Storage Profile: Square*Overhead Storage--Metal Chasis/Metal Front*Overhead Storage Profile: Lunar*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing for necessary verticalcord management*Vertical Storage Profile: Square* Where tool tile indicated, include $150.00 list per office for tool tile accessories* Accessories to be selected once contract is awarded to winning bidder.* Pulls: Arc Pull-501 Platinum Metallic* 49" H Non powered, Monolithic Panels, Tackable/Acoustical Tiles,* 67"H Non-Powered, Monlithic Panels, Tackable Acoustical Tiles* 67"H Powered, Monlithic Panels, Tackable Acoustical Tiles-base power feed,shared power*Top Caps: Curved Profile, Painted: 501 Platinum Metallic*Wireway Covers: 501 Platinum Metallic

Finishes: Worksurfaces: MH-Mocha Cherry LaminatePVC Edge: Dark ChocolateWire Manager: Dark ChocolateUnder surface storage: LMH Mocha CherryOverhead Storage: Painted-501 Platinum MetallicTack Board Fabric: Grade A-Kimball, Pattern: Fusion, Color: 16105 MineralPanel Fabric: Grade B-Kimball, Pattern: Savile, Color: 25306 Twill

Vertical Storage: Painted-501 Platinum Metallic


Components: Each "A" U-shaped Workstation Includes:A. 24"x 96" Rectangular Work surface: SS2496WSS-L3-P-STD-MH-STD-B. 24"x 48" Rectangular Work surface: SS2448WSS-L3-P-STD-MH-STD-C. 24" x 72" Rectangular Work surface: SS2472WSS-L3-STD-MH-STD-D. 36" W Lunar Overhead Storage Bin: 24S143614SOFM-KSB-STDM-501E. 30"W 2H Lateral File (below work surface) Model: FSL233027-L-ARC501-KSB-MHF. File/File Pedestal: FSF2318-ARC501-KSB-MHG. Vertical Storage Tower-Wardrobe with Box/Box File-24"D x 24"W x 66"H Model: Refer to F.7a for specificationsH. File/File Pedestal: Refer to F.9 for specificationsEach "B" U-shaped Workstation Includes:A. (1) 24"x 48" Rectangular Work surface: SS2448WSS-L3-P-STD-MH-STD-B. (2) 24" x 72" Rectangular Work surface: SS2472WSS-L3-STD-MH-STD-C. (2) 36" W Lunar Overhead Storage Bin: 24S143614SOFM-KSB-STDM-501D. (1) File/File Pedestal: FSF2318-ARC501-KSB-MHF. (1) 30"W 3H Lateral File (below work surface) Refer to F.1.M.30G. (1) Vertical Storage Tower-Wardrobe with Box/Box File-24"D x 24"W x 66"H Model: Refer to F.7a for specifications

Each "C" L-shaped Workstation Includes:A. (1) 24" x 48" Rectangular Work surface: SS2448WSS-L3-STD-MH-STD-B. (1) 18"x 48" Rectangular Work surface: SS1848WSS-L3-P-STD-MH-STD-C. (1) 30"W 3H Lateral File -501 Platinum Metallic Model: Refer to F1.M.30 For specifications

Panels: Refer to Furniture Plan for LocationH. (8) 50"H Non-powered frame with/tackable/acoustical tiles, painted trim cap Panel Fabric: Refer to "finishes" for fabric informationI. (4) 67"H Powered, monolithic frame with tackable acoustical tiles,painted trim cap Panel Fabric: Refer to "finishes" for fabric informationJ. (4) 67"H Non-Powered, monolithic frame with tackable acoustical tiles,painted trim cap Panel Fabric: Refer to "finishes" for fabric information Panel Fabric: Refer to "finishes" for fabric informationK. (2) Fold Down Tiles: 18"W x 11-7/16"H Model: 36P181ITR-STDM-501







Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Square*Wire Manager Rim-all surfaces*PVC Edge-Matching*Undersurface Files-Metal fronts/chasis*Under surface Storage Profile: Square*Overhead Storage-Metal Chasis/Metal Fronts*Overhead Storage Profile: Lunar*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing for necessary vertical cord management*Vertical Storage Profile: Square* Where tool tile indicated, include $150.00 list per office for tool tile accessories* Accessories to be selected once contract is awarded to winning bidder.* Pulls: Arc Pull-501 Platinum Metallic

Finishes: Worksurfaces: LMH-Mocha Cherry LaminatePVC Edge: Dark ChocolateWire Manager: Dark ChocolateUnder surface storage: 501 Platinum MetallicOverhead Storage: Painted-501 Platinum MetallicTack Board Fabric: Grade A-Kimball, Pattern: Fusion, Color: 16105 MineralVertical Storage: Painted-501 Platinum MetallicFixed Column Leg Support: 501 Platinum Metallic



Components: A. (1) 24" x 48" x 72" Peninsula Top: SS244872WSUE-L3-P-STD-LMH-STD-B. (1) 24"x 48" Rectangular Work surface: SS2448WSS-L3-P-STD-LMH-STD-D.1 (2) 48"W Bevel Full Height Open Shelves (double row): IS/448160S-STDM-501D.2 (2) 48" Bevel Half Height Open Shelves: IS4448080S-STDM-501E. (2) Cubby Storage (metal) mounted below open shelves.Model: 12S4807SMCXP-STDM-501F. (1) 48" W Tack Tile: Refer to Tack Fabric listed in "Finishes" aboveModel: 36P482ITASCG. (1) 48" W Tack Tile/Tool Rail Combo-TackModel Tack: 36P48H18ITASCModel Tool: 36P48H06ITSH. (1) Fixed Column Leg: AC2804SFB-STDM-501I. (1) 30"W 2H Lateral File-Metal 501 MetallicJ. Vertical Storage: Refer to F.14 for specifications







Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Square*Wire Manager Rim-all surfaces*PVC Edge-Matching*Undersurface Files-Metal Chasis/Fronts*Under surface Storage Profile: Square*Overhead Storage-Metal Chasis/Metal Fronts*Overhead Storage Profile: Lunar*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing for necessary vertical cord management*Vertical Storage Profile: Square* Where tool tile indicated, include $150.00 list per office for tool tile accessories* Accessories to be selected once contract is awarded to winning bidder.* Pulls: Arc Pull-501 Platinum Metallic

Finishes: Worksurfaces: LMH-Mocha Cherry LaminatePVC Edge: Dark ChocolateWire Manager: Dark ChocolateUnder surface storage: Painted 501 Platinum MetallicOverhead Storage: Painted-501 Platinum MetallicTack Board Fabric: Grade A-Kimball, Pattern: Fusion, Color: 16105 MineralVertical Storage: Painted-501 Platinum MetallicFixed Column Leg Support: 501 Platinum Metallic



Components: A. (1) 24" x 48" x 72" Peninsula Top: SS244872WSUE-L3-P-STD-LMH-STD-B. (2) 24"x 48" Rectangular Work surface: SS2448WSS-L3-P-STD-LMH-STD-D.1 (2) 48"W Open Shelves-Metal Full height Model: IS144816OS-STDM-501D.2 (2) 48"W Open Shelves- Metal- Half Height; model IS1448090S-STDM-501E. (2) 48" W cubby storage-metal (mounted below open shelves) Model: 12S4807SMCXP--STDM-501F. (1) 48" W Tack Tile: Refer to Tack Fabric listed in "Finishes" aboveModel: 36P482ITASCG. (1) 48" W Tack Tile/Tool Rail Combo-TackModel Tack: 36P48H18ITASCModel Tool: 36P48H06ITSH. (1) Fixed Column Leg: AC2804SFB-STDM-501I. (1) 30"W 2H Lateral File (below work surface) Model: Metal, 501 Platinum Metallic, ARC 501 PullJ. Vertical Storage: Refer to F.14 for specifications







Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Square*Wire Manager Rim-all surfaces*PVC Edge-Matching*Undersurface Files-Metal Chasis/Fronts*Under surface Storage Profile: Square*Overhead Storage-Metal Chasis/Metal Fronts*Overhead Storage Profile: Lunar*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing for necessary vertical cord management*Vertical Storage Profile: Square* Where tool tile indicated, include $150.00 list per office for tool tile accessories* Accessories to be selected once contract is awarded to winning bidder.* Pulls: Arc Pull-501 Platinum Metallic

Finishes: Worksurfaces: LMH-Mocha Cherry LaminatePVC Edge: Dark ChocolateWire Manager: Dark ChocolateUnder surface storage: Painted 501 Platinum MetallicOverhead Storage: Painted-501 Platinum MetallicTack Board Fabric: Grade A-Kimball, Pattern: Fusion, Color: 16105 MineralVertical Storage: Painted-501 Platinum MetallicFixed Column Leg Support: 501 Platinum Metallic



Components: A. (1) 24" x 48" x 72" Peninsula Top: SS244872WSUE-L3-P-STD-LMH-STD-B. (1) 24"x 48" Rectangular Work surface: SS2448WSS-L3-P-STD-LMH-STD-C. (1) 24" x 60" Rectangular Work surface: SS2460WSS-L3-STD-LMH-STD-D.1 (2) 36"W Open Shelves-Metal Full height (rows stacked on top of each other) Model: IS143616OS-STDM-501D.2 (2) 36"W Open Shelves Metal - Half Height; model: IS143609oS-STDM-501E. (2) 36" W cubby storage-metal (mounted below open shelves) Model: 12S3607SMCXP--STDM-501F. (1) 48" W Tack Tile: Refer to Tack Fabric listed in "Finishes" aboveModel: 36P482ITASCG. (1) 48" W Tack Tile/Tool Rail Combo-TackModel Tack: 36P48H18ITASCModel Tool: 36P48H06ITSH. (1) Fixed Column Leg: AC2804SFB-STDM-501I. (1) 30"W 2H Lateral File (below work surface) Model: Metal, 501 Platinum Metallic, ARC 501 PullJ. Vertical Storage: Refer to F.14 for specifications




Type: Freestanding Mounted Work surface



Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Square*PVC Edge-Matching

Finishes: Worksurfaces: LMH Mocha CherryPVC Edge: Dark ChocolateWire Manager: Dark Chocolate

Notes: Include pricingfor all necessary filler panels and/or leveling strips as requiredProvide fully adjustable articulating keyboard tray (KBT) with mouse pad whereindicated on plan.

Components:A. (1) 24"x wall to wall (field verify)" Rectangular Work surface:SS24??WSS-L3-P-STD-LMH-STD-Provide fully adjustable articulating keyboard trays (Recommend)


Work Surface WS-33







Features: *1-3/16 Laminate Work surfaces, wall mounted* Worksurface Profile: Squares*Wire Manager Rim-all surfaces*PVC Edge-Matching*Undersurface Files-Laminate fronts/chasis*Under surface Storage Profile: Square*Overhead Storage-Laminate Chasis/Fronts*Overhead Storage Profile: Square*Coordinate components mounted to traditional drywall wall vs. DIRTT Wall. Provide pricing for all necessary mounting brackets*Task lighting-below overhead storage. Include pricing for necessary vertical cord management*Vertical Storage Profile: Square* Where tool tile indicated, include $150.00 list per office for tool tile accessories* Accessories to be selected once contract is awarded to winning bidder.* Pulls: Arc Pull-501 Platinum Metallic

Finishes: Worksurfaces: LMH-Mocha Cherry LaminatePVC Edge: Dark ChocolateWire Manager: Dark ChocolateUnder surface storage: LMH Mocha CherryOverhead Storage: LMH Mocha CherryTack Board Fabric: Grade A-Kimball, Pattern: Fusion, Color: 16105 MineralVertical Storage: Metal 501 Platinum MetallicFixed Column Leg Support: 501 Platinum Metallic



Components: A. (1) 24" x 48" x 72" Peninsula Top: SS244872WSUE-L3-P-STD-LMH-STD-B. (2) 24"x 48" Rectangular Work surface: SS2448WSS-L3-P-STD-LMH-STD-C. (2) 36"W Overhead Storage w/Hinged Doors: B3619-H-L-N-KSB-STD-LMHD. (1) 72" W Tack Tile: Refer to Tack Fabric listed in "Finishes" aboveModel: 36P722ITASCE. (1) Fixed Column Leg: AC2804SFB-STDM-501F (1) 30"W 2H Lateral File (below work surface) Model: FSL233027-L-ARC501-KSB-MHG. Vertical Storage: Refer to F.14 for specifications


Side Chair SC-1Quantity: Refer to furniture plans

Manufacturer: Allsteel or Approved Equal

Type: Armless, upholstered

Style Name: Seek

Model Number: K-MUCASCB

Dimensions: Overall: 35.5” H x 23.25” W x 22” DSeat: 19” H x 18” W x 17.25” D

Finishes: Silver frame, onyx polyDusk Mesh

Features: Mesh backUpholstered seatCastersStackable (up to 8 high for stationary storage)Nesting

Upholstery: Paul Brayton

Pattern: Brite Lites BRL-68

Color: Pixie

Repeat: 7/8"V, 3.8"H

Content: 100% Polyester, Crypton

Yards Required: .7 yds - confirm with manufacturer

Other:


Side Chair SC-1AQuantity: Refer to furniture plans



Style Name: Seek





Upholstery: Maharam

Pattern: Cinch

Color: 010 Island

Repeat: N/A

Content: 67% post ind. recycled poly, 28% post ind.recycled poly, 5% poly

Yards Required: .7 ydsConfirm with furniture manufacturer

Other:


Side Chair SC-1BQuantity: Refer to furniture plans



Style Name: Seek





Upholstery: Luna Textiles

Pattern: Twiggy OTG-2120

Color: Sylvan

Repeat: 9"H x 11"V

Content: 36% wool, 33% cotton, 27% poly, 4% nylon


Other:





Style Name: Seek




Features: Mesh backUpholstered seatNo castersStackable (up to 8 high for stationary storage)Nesting

Upholstery: Momentum

Pattern: Jolt

Color: Aloe

Repeat:

Content:


Other:




Type: Arms, upholstered

Style Name: Seek

Model Number: K-MUCOSCB



Features: Mesh backUpholstered seatCastersStackable (up to 8 high for stationary storage)NestingArms

Upholstery: Maharam

Pattern: Cinch

Color: 010 Island

Repeat: N/A

Content: 67% post ind. recycled poly, 28% post ind.recycled poly, 5% poly


Other:





Style Name: Seek





Upholstery: Luna

Pattern: Beam CBM 2252

Color: Spangle

Repeat: 9" H x 27" V

Content: 68% Cotton, 32% Nylon


Other:





Style Name: Seek





Upholstery: Maharam

Pattern: Across 465964

Color: 006 Cloud Burst

Repeat: n/a

Content: 100% post consumer poly


Other:


Side Chair SC-3CQuantity: Refer to furniture plans



Style Name: Seek





Upholstery: Maharam

Pattern: Exchange 466027

Color: 002 Sable

Repeat: 5 1/8" V, 7/8" H (57" Wide)

Content: 68% Post ind. recycled poly, 32% post consrecycled poly, stain resistant finish


Other:


Side Chair SC-3DQuantity: Refer to furniture plans



Style Name: Seek





Upholstery: Gradedin (grade A)

Pattern: Whisper Vinyl

Color: Black

Repeat: n/a

Content: 100% vinyl/polyurethane


Other:


Side Chair SC-3EQuantity: Refer to furniture plans



Style Name: Seek







Color: Glitter

Repeat: 7/8" V x 3/8" H

Content: 100% poly, Crypton


Other:


Side Chair SC-3FQuantity: Refer to furniture plans



Style Name: Seek





Upholstery: ArcCom

Pattern: Piazza AC69084

Color: Green Tea #5

Repeat: 1"H x 1"V

Content: 47% poly, 32% rayon, 21% cotton


Other:


Side Chair SC-3GQuantity: Refer to furniture plans



Style Name: Seek





Upholstery: Pallas

Pattern: Ravenna 27.153.084

Color: Rimini

Repeat: 7 3/4" V, 6 7/8" H

Content: 53% poly, 47% rayon


Other:


Side Chair SC-3HQuantity: Refer to furniture plans



Style Name: Seek





Upholstery: Maharam

Pattern: Coincide 465808

Color: 004 Bungalow

Repeat: 10" V x 14.15" H

Content: 100% polyester; stain resistant


Other:



Manufacturer: Kimball or Approved Equal

Type: Upholstered (vertical insert back) side chair

Style Name: Beo Side Chair

Model Number: K58DD

Dimensions: Overall: 32.75" H x 23.375" W x 24.75” DSeat: 18.5” H x 20.5” W x 18.5” DArm: 26"H

Finishes: wood - Mocha Cherry - MH

Features: Nylon glides

Upholstery: Luna

Pattern: Beam CBM-2252

Color: Spangle

Repeat: 9" H x 27" V

68% cotton, 32% nylonContent:

Yards Required: 1.4 ydsConfirm with furniture manufacturer

Other:






Model Number: K58DD


Finishes: wood - Mocha Cherry


Upholstery: Maharam



Repeat: n/a



Other:






Model Number: K58DD




Upholstery: ArcCom

Pattern: Tempo AC 69349

Color: Bark #10

Repeat: 13"H

Content: 55% post cons. Recycled poly, 45% post indrecycled poly, nanotex


Other:


Side Chair SC-4CQuantity: Refer to furniture plans




Model Number: K58DD




Upholstery: Maharam

Pattern: Exchange 466027

Color: 002 Sable

Repeat: 5 1/8" V, 7/8" H (57" Wide)

Content: 68% Post ind. recycled poly, 32% post consrecycled poly, stain resistant finish


Other:


Side Chair SC-4DQuantity: Refer to furniture plans




Model Number: K58DD




Upholstery: Pallas


Color: Romagna

Repeat: 7 3/4" V x 6 7/8" H

Content: 53% poly, 47% rayon, nanotex/light acrylic


Other:




Type: Two Seat Upholstered Lounge

Style Name: Beo Lounge - Two Seat

Model Number: K58WW

Dimensions: Overall: 32" H x 49” W x 29.5” DSeat: 19” H x 45” W x 18.875” DArm: 25.5"H

Finishes: wood - Mocha Cherry - MHFeatures: Wood arm cap

Nylon glides

Upholstery: DesignTexArm/Back/Front borderPattern: Tailored Stripe 2763.102

Color: Chesterfield Brown

Repeat: 4/ 3/4" V x H 0 (57" wide)

Content: 65% poly, 35% cotton

Yards Required: 10.7 yards total- 1 fabricConfirm with furniture manufacturer

Seat Upholstery: Arc Com

Pattern: Frontier AC67499

Color: Rhino #20

Repeat: n/a

Content: 100% vinyl face / 100% poly hi loft backConfirm with furniture manufacturer

Yards Required:




Type: Upholstered Lounge

Style Name: Beo Lounge

Model Number: K58VV

Dimensions: Overall: 32" H x 25.5” W x 29.5” DSeat: 19” H x 21.5” W x 18.875” DArm: 25.5"H


Features: Wood arm capNylon glides

Upholstery: DesignTex

Pattern: Tailored Stripe 2763.102


Repeat: 4/ 3/4" V x H 0 (57" wide)


Yards Required: 6.3 yardsConfirm with furniture manufacturer






Model Number: K58VV




Upholstery: DesignTexBack, Arms, Front borderPattern: Tailored Stripe 2763.102


Repeat: 4/ 3/4" V x H 0 (57" wide)


Yards Required: 6.3 yardsConfirm with furniture manufacturer

Seat Upholstery: Arc Com


Color: Rhino #20

Repeat: n/a

Content: 100% vinyl face / 100% poly hi loft back

Yards Required: Confirm with furniture manufacturer






Model Number: K58VV




Upholstery: Arc Com


Color: Rhino #20

Repeat: n/a

Content: 100% vinyl face / 100% poly hi loft back

Yards Required: 6.3 yardsVerify with furniture manufacturer



Manufacturer: KI or Approved Equal

Type: Conference room chair with arms

Style Name: Impress Ultra Task Chair

Model Number: K178/JR30-NF-SLD-NH-BL-MS-CLA-BCK-C

Dimensions: Overall: 36.5-41.5: H x 26” W x 25” DSeat: 17.75-22.25” H x 20.5” W x 18-19.5” DArm height: 26.25-30.25"

Finishes: Black base/frame

Features: High backMesh backCarpet castersSeat slideNo memory foam

Upholstery: KI

Pattern: Classic Impression

Color: Black

Repeat: n/a

Content: 100% nylon

Yards Required: 1 yds (more than 5 chairs - 3/4 yd)Confirm with furniture manufacturer

Other:


Side Chair SC-8Quantity: Refer to Furniture Plan

Manufacturer: Paoli or Approved Equal

Type: Conference Room Arm chair

Style Name: R5- Mid Back- fixed

Model Number: P1721-CM-STD-FA

Dimensions: Overall: 39-43: H x 26.5” W x 25” DSeat: 22.5” H x 21.5” W x 18.5” DArm height: 26.25-30.25"

Finishes: Polished die cast aluminum baseWood finish: Espresso on Cherry

Features: Polished die cast aluminum baseStandard swivelFixed Loop arm with wood cap

Upholstery: Graded In (IV)

Pattern: Brisa

Color: Black Onyx 85066

Repeat: n/a

Content: 100% polyurethane surface w/ 100%reinforced rayon backing

Yards Required: 2 ydsConfirm with furniture manufacturer

Other:



Manufacturer: OFS or Approved Equal

Type: Guest Chair

Style Name: Berkshire Guest

Model Number: 2807-W-X

Dimensions: Overall: 39.5" H x 25.5” W x 26.5" DSeat: 19.75" H x 18.5” W x 19" DArm height: 6.25"

Finishes: Sable Walnut wood finish

Features: Guest backStandard welt trim

Upholstery: Designtex

Pattern: Yorkshire 2771-102

Color: Dakota- 102

Repeat: 1" V x 1" H

Content: 100% lambswool

Yards Required: verify with manufacturerConfirm with furniture manufacturer

Other:



Manufacturer: OFS or Approved Equal

Type: Mid Back Swivel Chair

Style Name: Berkshire Mid Back Swivel

Model Number: 2818-B-2-W-X

Dimensions: Overall: 40" H x 25.75” W x 29.5" DSeat: 19.75" H x 18.25” W x 19.25" DArm height: 6.25"

Finishes: Sable Walnut wood finish

Features: Guest backStandard welt trim5 prong steel swivel baseSwivel tilt controlSolid hardwood base caps (std)Brass hooded casters (std)

Upholstery: OFS

Pattern: Canter

Color: Onyx

Repeat: n/a

Content:

Yards Required: verify with manufacturer

Other:


Coat Rack CR-1Quantity: Refer to Furniture Plan

Manufacturer: Magnuson Group or Approved Equal

Type: Coat rack

Style Name: EWC Personal Costumers

Model Number: EWC-4HT

Dimensions: Overall: 70 3/8" H x 24” W x 24" D

Finishes: Mahongany finish

Features: Solid wood customer with traditional base4 matching hangers with mini hooks on polished chrome knobs


File - Mobile Pedestal - Box/File MP-1Quantity: Refer to Furniture Plan

Manufacturer: Kimball

Type: mobile ped - box/file

Style Name: Footprint

Model Number:

Dimensions:

Finishes: Pull - 501 Platinum MetallicLaminate: Chasis/Front

Features: Upholstered seatCasters

Upholstery: Maharam



Repeat: n/a


Yards Required: verify with manufacturer

Other:


File - Mobile Ped - Box/File MP-1AQuantity: Refer to Furniture Plan


Type: Mobile Ped Box/File with cushion top


Model Number:

Dimensions:

Finishes:

Features: Laminate Chasis front - LMH Mocha CherryKey like rest of officePull - ARC501 - Platinum MetallicUpholstered seatCasters

Upholstery: ArcCom

Pattern: Tempo AC 69349

Color: Bark #10

Repeat: 13"H

Content: 55% post cons. Recycled poly, 45% post indrecycled poly, nanotex


Other:


Table T-1Quantity: Refer to Furniture Plan


Type: 48" Round table

Style Name: Synthesis- fixed leg

Model Number: SR4FX-KN-MT-LMT-SX

Dimensions: Overall: 48" diameter29" H

Finishes: LBW Brighton Walnut w/ matching PVC edge bandStarlight Silver Metallic base

Features: X baseFixed legLaminate top with matching edge bandKnife edgeNon PoweredGlides




Type: 36" Round table


Model Number: SR3FX-KN-MT-LMT-SX

Dimensions: Overall: 36" diameter29" H






Type: 36" Square table


Model Number: SS3FX-KN-MT-LMT-SX

Dimensions: Overall: 36" x 36"29" H




Table T-3AQuantity: Refer to Furniture Plan


Type: 42" Square table


Model Number: SS35FX-KN-MT-LMT-SX







Type: Oval table

Style Name: Synthesis- fixed TT leg

Model Number: SO48F-KN-MT-LMT-SX



Features: TT baseFixed legsLaminate top with matching edge bandKnife edgeNon PoweredGlides




Type: Rectangular Table

Style Name: Synthesis- fixed TT leg

Model Number: S412F-KN-MT-LMT-SXInclude Power Up w/ (2) modules



Features: TT base (3)Fixed legsLaminate top with matching edge bandKnife edgePowered tablewire managementInclude Power Up w/ (2) modules



Manufacturer: Nucraft or Approved Equal

Type: Boardroom table

Style Name: Neos Table

Model Number: NET-21648-V-BDCOVE-W; PC-43

Dimensions: Overall: 216" x 48" x 29.5" H

Finishes: Table/base Wood veneer: CoCo Cherry- G96 Gloss sheen

Features: Wood door at center of ea section for power (2 total)Fixed legsVeneer top and baseKnife edge (std)Base standard with hinged panel for accessEach unit ships with (1) double open slot (COVE- FNG2); (1) VGA (COVEVGA1),(1) RCA (COVE-RCA-1) And one blank faceplate which can be easily interchangedwith RJ-45 and RJ-11 faceplates


Ancillary A-1Quantity: Refer to Furniture Plan

Manufacturer: Bretford or Approved Equal

Type: Technology cart

Style Name: Antimicrobial ECILS1Tall cart

Model Number: ECILS1-BPMBT

Dimensions: Overall: 42" H x 32" W x 24” D

Finishes: Black

Features: Tall cart, blackAdjustable laptop shelfRear cord management binsNo power



Manufacturer: Nucraft or Approved Equal

Type: Lectern

Style Name: Forte

Model Number: FFL-2447


Finishes: Wood Veneer: CoCo Cherry G96 Gloss sheen

Features: RB-Reverse Bevel edge profileWood veneer surfacesHidden locking castersReading light standardNon-PoweredOne adjustable and one fixed shelfGrommets included



Manufacturer: Humanscale or Approved Equal

Type: Monitor Arm

Style Name: M7

Model Number: M7

Dimensions:

Finishes: Die cast aluminum frame

Features: 13" depth adjustmentIndependent manual height adjustment360" monitor arm rotation for landscape or portrait viewingDie cast aluminum frameInstalls through grommets on desk


Ancillary A-11AQuantity: Refer to Furniture Plan


Type: Monitor Arm- dual monitor

Style Name: M8 with crossbar

Model Number: M8 with crossbar

Dimensions:


Features: 13" depth adjustmentIndependent manual height adjustment180 degree stop mechanismDie cast aluminum frameInstalls through grommets on deskDual monitors




Type: Wall Traxx

Style Name: Traxx

Model Number: (2) TPT3647MMFALUM (Flexboards - Marker/Marker)(2) TPT3248EFCH (Extendable flip chart holder w/ pen holder)(1) TTWMT144-STD-510 (Traxx)

Dimensions: Flexboards: 35 7/16" W x 46 5/8" HFlip Chart: 31.5" W x 38 3/8" HTraxx: 12' long

Finishes: Standard Silver Frost Metallic 510

Features: Mounting hardware (std)One pad of paper included with extendable flip chart holder


Occasional Table OT-3Quantity: Refer to Furniture Plan


Type: Drum Table

Style Name: Cylinder Table

Model Number: CT11-2220W

Dimensions: Overall: 20" H x 22" Diameter

Finishes: Laminate: LMH Mocha Cherry

Features: Glides


Occasional Table OT-4Quantity: Refer to Furniture Plan


Type: Square magazine table

Style Name: Fluent (to match Beo)

Model Number: 80K3434MGW-STD-AR-STD

Dimensions: Overall: 17" H x 34"W x 34" D

Finishes: Laminate: LMH Mocha CherryTable top and legs to be all laminate

Features: Glides


Bookcase BC.1Quantity: Refer to Furniture Plans

Manufacturer: Kimball (or approved equal)

Type: Bookcase

Style Name:

Dimensions: 42" W x 18"D x 42"H

Finishes: M=Metal Chasis/ front: 501 Platinum Metallic

Features:


Filing F.1Quantity: Refer to Furniture Plans


Type: Lateral File


Notes: Pricing to include all rails, brackets, and hardware necessary for installationper manufacturers recommendations.

Dimensions: F.1.L.30= 30"W x 24"D x 3H Lateral Laminate - refer to furniture plan for locationF.1.L.36= 36"W x 24"D x 3H Lateral Laminate - refer to furniture plan for locationF1.M.30= 30"W x 18"D x 3H Lateral Metal - refer to furniture plan for locationF1.M.36= 36"W x 18"D x 3H Lateral Metal - refer to furniture plan for locationF1.M.42= 42"W x 18"D x 3H Lateral Metal - refer to furniture plan for location

Finishes: L=Laminate Chasis/ front: Mocha Cherry LMHM=Metal Chasis/ front: 501 Platinum Metallic

Features: Lock option: Key specificPull: ARC 501 Platinum MettalicFor Laminate units- finish back/top to match


Filing F.2Quantity: Refer to Furniture Plan


Type: Lateral File



Dimensions: F.2.L.30 = 30"W x 24"D x 4H Lateral Laminate - refer to furniture plan for locationF.2.L.36= 36"W x 24"D x 4H Lateral Laminate - refer to furniture plan for locationF.2.M.30= 30"W x 18"D x 4H Lateral Metal - refer to furniture plan for locationF.2.M.36= 36"W x 18"D x 4H Lateral Metal - refer to furniture plan for locationF.2.M.42= 42"W x 18"D x 4H Lateral Metal - refer to furniture plan for location






Type: Lateral File



Dimensions: F.3.L.30 = 30"W x 24"D x 5H Lateral Laminate - refer to furniture plan for locationF.2.L.36= 36"W x 24"D x 5H Lateral Laminate - refer to furniture plan for locationF.3.M.30= 30"W x 24"D x 5H Lateral Metal - refer to furniture plan for locationF.3.M.36= 36"W x 24"D x 5H Lateral Metal - refer to furniture plan for locationF.3.M.42= 42"W x 24"D x 5H Lateral Metal - refer to furniture plan for location






Type: Lateral File



Dimensions: F.4.L.36 = 36"W x 24"D x 6H Lateral Laminate - refer to furniture plan for location

Finishes: L=Laminate Chasis/ front: Mocha Cherry LMH





Type: 2H Lateral File & Bookcase Above



Dimensions: F.5.L.36 = 36"W x 24"D x 2H Lateral Laminate - refer to furniture plan for locationBookcase - 2 Shelf Laminate - 36"W x 15"D x 30"H

Finishes: L=Laminate Chasis/ front: Mocha Cherry LMH



Filing F.5aQuantity: Refer to Furniture Plan


Type: Single Hutch w/Lateral File - M60-1

Style Name: Woodbridge Collection


Dimensions: 2 Drawer File - 60-2926TDF (29"W x 21"D x 25"H)Open Bookcase - 60-48291-HSO (29"W x 14"D x 48"H)Hutch crown - 60-3015HC (31"W x 15"D x 35"H)Cabinet Top - 60-3122CCT (31"W x 22"D x 1"H)Cabinet Base - 60-3021CCB (30"H x 22"D x 4"H)Molding: Price to include molding

Finishes: Finish MLW Legacy Walnut on Walnut

Features: Pulls: Antique Brass




Type: Vertical Storage Lateral File with Hinged Doors - Square profile



Model #/Dimensions: FWL2H3668 - (36"W x 23"D x 68"H)

Finishes: Laminate Chasis/ front: Mocha Cherry LMH

Features: Lock option: Key specificPull: ARC 501 Platinum MettalicInclude finished back/top to match




Type: Vertical Storage Towers - Metal w/wood front - Wardrobe, Hinged Door



Model #/Dimensions: 12S2466VHHR2MW - (24"W x 24"D x 66"H)

Finishes: Chassis: metalFront: Wood MH Mocha CherryWardrobe Bar - Galvanized Finish

Features: Lock option: Key specificPull: ARC 501 Platinum MettalicInclude filler strips as requiredInclude finished back




Type: Storage Towers - Metal front - Wardrobe, Hinged Door, file/file



Model #/Dimensions: 12S2466BWHL2M - (24"W x 24"D x 66"H)

Finishes:Metal Chasis/ front: 501 Platinum Metallic

Features: Lock option: Key specificPull: ARC 501 Platinum MettalicInclude filler strips as necessary




Type: Box/Box File Pedestal- under counter



Dimensions: 15"W x 23"D


Features: Lock option: Key specificPull: ARC 501 Platinum Mettalic




Type: File/File Pedestal - Laminate









Type: 2H Lateral file- Metal




Finishes: Metal Chassis/ front: 501 Platinum Metallic

Features: Lock option: Key specificPull: ARC 501 Platinum MettalicInclude finished back/top to match




Type: Vertical Storage Wardrobes - Laminate


Model: FFWR0668-L-KSB-STD-LMH

Notes: Pricing to include all rails, brackets, and hardware necessary for installationper manufacturers recommendations.Verify door swing in plan

Dimensions: 6"W x 24"D x 68"H


Features: Lock option: Key specificPull: ARC 501 Platinum MettalicFinishes backInclude filler strips as necessary




Type: Vertical Storage Wardrobes - Metal



Dimensions: 6"W x 18"D x 68"HNote: custom depth

Finishes: Metal Chasis/ front: 501 Platinum Metallic

Features: Lock option: Key specificPull: ARC 501 Platinum MettalicInclude filler strips as necessary




Type: Box/File Mobile Pedestal - Metal




Finishes: Metal Chasis/ front: 501 Platinum MetallicCushion top fabric: MFG: Momentum Jolt - Color: Aloe



Pattern: Jolt

Color: Aloe

Repeat:

Content:


Other:




Type: Box/File Mobile Pedestal - Metal




Finishes: Metal Chasis/ front: 501 Platinum MetallicCushion top fabric: MFG: Knoll Fibra - Color: Azure and Tourquise K110512


Upholstery: Knoll

Pattern: Fibra

Color: Azure & Turquoise K110512

Repeat: 5" V x 7" H

Content: 71% cotton, 29% rayon


Other:




Type: Vertical Storage Wardrobe and Lateral File with Hinged Door Storage


Notes: Pricing to include all rails, brackets, and hardware necessary for installationper manufacturers recommendations.Verify door swing in furniture plan

Dimensions: Waredrobe Size: 23"D x 6 1/4"W x 67 1/2"H4H Lateral File w/ hinged door: 23"D x 30"W x 67 1/2"H

Finishes: 501Platinum Metallic

Model: Wardrobe- Metal=CustomFile: Metal= Custom

Features: Lock option: Key specificPull: ARC 501Hanger Bar and WardrobeMetal Chasis / front: 501 PlatinumInclude filler strips as required




Type: Vertical Storage 15"W File/File


Notes: Pricing to include all rails, brackets, and hardware necessary for installationper manufacturers recommendations.File/File with closed storage aboveVerify door swing in furniture plan

Dimensions: 18"D x 15"W x 66"H


Model: 12S1566VHR2M-ARC501-KSB-STDM-501

Features: Lock option: Key specificPull: ARC 501Closed storage includes 2 adjustable shelvesMetal Chasis / front: 501 Platinum MetallicInclude filler strips as requiredFinished Back




Type: Vertical Storage 15"W File/File


Notes: Pricing to include all rails, brackets, and hardware necessary for installationper manufacturers recommendations.File/File with open storage above

Dimensions: 18"D x 15"W x 66"H


Features: Lock option: Key specificPull: ARC 501open storage includes 2 adjustable shelvesMetal Chasis / frontInclude filler strips as requiredFinished Back




Type: Vertical Storage - 4H Lateral File with Hinged Door Storage

Style Name: Model FWL4H3668-ARC501-KSB-STP-LMH

Models: FWL4H3668-ARC501-KSB-STD-LMH

Dimensions: 23"D x 36"W x 67 1/2"H

Finishes: Mocha Cherry Laminate LMH

Features: Lock option: Key specificPull: ARC 501Laminate Chasis / frontInclude filler strips as required




Type: Vertical Storage - Lateral File with 6" Drawers - Metal

Style Name: LF Series

Notes:


Finishes: 501 Platinum Metallic

Features: Lock option: Key specificPull: ARC 501 Platinum MetallicInclude levelers as required to ensure unit is aligned top/face of adjacent storage unit

Metal Chasis/Front



Manufacturer: Space Saver Storage (or approved equal)

Type: High Density Filing

Style Name: Rotary Storage Systems

Model Number: 6-Plus UnitLevels 1 thru 6 to include open shelving with 3 shelf dividers per level

Note: Pricing to include all rails, brackets, and hardware necessary for installationper manufacturers recommendations

Dimensions: 36-1/2"W x 76.625"H

Finishes: to be selected from manufacturers 20 standard colors

Features: *Maximizes space efficiency*Maximum Flexibility*Adjustable Shelvingwith shelving assembly




Type: Vertical Storage - 3 Drawer Lateral File w/ 2 Shelf Bookcase on Top - Laminate

Style Name:

Dimensions: Lateral Size: 23"D x 36"W x 40 3/4"H- LaminateBookcase Size: 16"D x 36"W x 30"H- Laminate

Finishes: Mocha Cherry LMH

Features: Lock option: Key specificPull: ARC 501Laminate Chasis/FrontInclude finished back/top to match



Manufacturer: First Office

Type: 4H Lateral Files

Style Name: Woodbridge Collection

Model #: 60-3655 LCF

Notes: NH-w/molding


Finishes: MLW Legacy Walnut on Walnut

Features: Legal or letter filingcentral locking with anti mechanismadjustable levelers




Type: High Density Filing-Manual

Style Name: Wheelhouse

Model Number: Refer to F.25(2) for specification informationModify specifications to shelving to include 3 lateral file drawers on the lowerportion of each U1 unit

Note: Pricing to include all rails, brackets, and hardware necessary for installationper manufacturers recommendations

Dimensions: Refer to F.25(2) for dimensional information (all dimensions to be field verifiedprior to ordering units)

Finishes: Painted -SX Starlight Silver Metallic

Features: *Interchangeable Componets*Low Profile Chasis*Engineer Welded Wheel housing around compact 3" wheels directly interlockswith shelving assembly


Filing F.25

NOTE: Not To Scale


Existing FilesQuantity: Refer to Furniture Plan

Description: Existing Metal Files to be Electrostatically PaintedRefer to Tag's below for size/types of files

Finish: Paint to Match Kimball's 501 Platinum MetallicSuccessful bidder to submit sample to specifier forapproval prior to work commencing

Tag: A. 36"W x 18"D x 6H Lateral FileB. 30"W x 18"D x 6H Lateral FileC. 36"W x 18"d X 6H Lateral FileD. 42"W x 18"D x 5H Lateral FileE. 30"W x 18"D x 6H Lateral FileF. Existing 4H Vertical Fire Proof FilesG. 30"W x 18"D x 3H Lateral fileH. 42"W x 18"D x 3H Lateral FileI. 36"W x 18"D x 3H Lateral FileJ. 36"W x 18"D x 2H Lateral FileK. 36"W x 18"D Lateral File w/Storage Cabinet AboveL. 36"W x 18"D x 3H Lateral FileM. 36"W x 18"D x 6H Lateral FileN. 30"W x 18"D-2H Lateral File with 3H open bookcase aboveO. 42"W x 18"D x 3H Lateral FileP. High Density Filing Unit-98"W x 25"D x 82"HQ. 30"W x 18"D x 6H Lateral FileR. 36"W x 18"D x 2H Lateral FileS. 48"W x 18"D x 3H Lateral FileT. 42"W x 18"D x 3H Lateral FileU. 36"W x 18"D x 72"H Metal Storage Cabinet w/doorsV. 36"W x 24"D x 72"H Metal Storage Cabinet w/doorsW. 30"W x 3H BookcaseX. 36"W x 3H BookcaseY. 42"W x 18"D x 3H Lateral File


Classroom Chair CC-1Quantity: Refer to furniture plan


Type: Classroom side chair, sled base

Style Name: Strive sled base

Model Number: SSNAU-SX-GR-NG

Dimensions: Overall: 33.25" H x 20.75" W x 21.75” DSeat: 18.75” H x 18” W x 18” D

Finishes: Starlight Silver metallic frameBlue Grey poly back

Features: Sled baseFlex backUpholstered seatStackable (up to 4 on floor; up to 6 on dolly)No glides

Upholstery: Pallas


Color: Rimini

Repeat: 7 3/4" V x 6 7/8" H

Content: 53% poly, 47% rayon, nanotex / light acrylic

Yards Required: 3/4 yds confirm with furniture manufacturer

Other:




Type: Classroom side chair, casters

Style Name: Strive casters, nesting

Model Number: SNNAUC-SX-GR-C

Dimensions: Overall: 33.25" H x 21.25" W x 22.5” DSeat: 18.75" H x 18” W x 18” D


Features: CastersFlex backUpholstered seatNesting

Upholstery: Pallas


Color: Rimini

Repeat: 7 3/4" V x 6 7/8" H



Other:




Type: Classroom Side chair, sled base

Style Name: Strive sled base

Model Number: SSNAU-SX-GR-NG

Dimensions: Overall: 33.25" H x 20.75" W x 21.75” DSeat: 18.75” H x 18” W x 18” D


Features: Sled baseFlex backUpholstered seatStackable (up to 4 on floor; up to 6 on dolly)No glides

Upholstery: Pallas

Pattern: Kwaart 29.061.095

Color: Melon

Repeat: 11 5/8" V x 4 1/2" H

Content: 100% poly, crypton proces


Other:






Model Number: SNNAU-SX-GR-C

Dimensions: Overall: 33.25" H x 21.25" W x 22.5” DSeat: 18.75" H x 18” W x 18” DArm: 26.5"H



Upholstery: Pallas


Color: Melon

Repeat: 11 5/8" V x 4 1/2" H



Other:


Classroom Chair CC-4AQuantity: Refer to furniture plan




Model Number: SNNAUC-SX-GR-C

Dimensions: Overall: 33.25" H x 21.25" W x 22.5” DSeat: 18.75" H x 18” W x 18” D



Upholstery: Maharam

Pattern: Chime 465350

Color: 011 Tranquil

Repeat: n/a

Content: 100% vinyl


Other:




Type: Classroom Instructor Stool

Style Name: Strive Task Stool

Model Number: SPSNAU-BL-GR-C

Dimensions: Overall: 35.5-43" H x 27.5" W x 27.5” DSeat: 20-27.5” H x 18” W x 18” D

Finishes: Black frame (std)Blue Grey poly back

Features: Upholstered seatFlex backCarpet casters

Upholstery: Pallas


Color: Melon

Repeat: 11 5/8" V x 4 1/2" H



Other:


Classroom Chair CC-5AQuantity: Refer to furniture plan


Type: Classroom Instructor Stool

Style Name: Strive Task Stool

Model Number: SPSNAU-BL-GR-C

Dimensions: Overall: 35.5-43" H x 27.5" W x 27.5” DSeat: 20-27.5” H x 18” W x 18” D

Finishes: Black frame (std)Blue Grey poly back

Features: Upholstered seatFlex backCarpet casters

Upholstery: Pallas


Color: Rimini

Repeat: 7 3/4" V x 6 7/8" H



Other:


Student Desk SD-1Quantity: Refer to furniture plan


Type: Double entry student desk

Style Name: Intellect Wave

Model Number: IWDELU/S-NB-MX-GR-MT-LMT-FS-NP

Dimensions: Overall: 32" H x 26" W x 36.75” DWorksurface: 29" H

Finishes: Worksurface: Monticello Maple w/ matching PVC edge bandingPoly Back: Blue GreyFrame: Starlight Silver Metallic

Features: Poly back and upholstered seatLaminate surface w/ matching edge bandNylon glidesNo book rack

Upholstery: Pallas


Color: Melon

Repeat: 11 5/8" V x 4 1/2" H

Content: 100% poly, crypton process


Other:


Student Desk SD-1AQuantity: Refer to furniture plan


Type: ADA adjustable height desk

Style Name: Intellect Wave ADA Cantilever Desk

Model Number: IWDCL-ADA-NB-SX-MT-LMT-FS-NP

Dimensions: Overall: 25-34" H x 26-33" W x 19-20" D

Finishes: Worksurface: Monticello Maple w/ matching PVC edge bandingPoly Back: Blue GreyFrame: Starlight Silver Metallic

Features: Laminate surface w/ matching edge bandNylon glidesNo book rack


Student Desk SD-2Quantity: Refer to furniture plan

Manufacturer: Versteel or Approved Equal

Type: Student Desk - with locking casters

Style Name: Rulo Table

Model Number: RU29 1925RETN L BCT


Finishes: Top: Millwork Cherry - laminate w/ matching PVC edge bandingAY - Alloy Frame

Features: Tilting (std)Nesting (std)Locking Casters (two toned gray)Laminate surface w/ matching edge banding


Student Desk SD-2AQuantity: Refer to furniture plan


Type: ADA desk

Style Name: Enlite- Swash Table 3/4" top w/ Fixed Leg

Model Number: ENSW1848AD-73P-MF-4GB-LMT-SX

Dimensions: Overall: 18" x 48" x 18 3/4"

Finishes: Worksurface: Monticello MapleStarlight Silver Frame

Features: 4 Glides


Ancillary A-2Quantity: Refer to furniture plan


Type: Mobile Instructor Station

Style Name: Instruct Classroom Furniture - All TerrainMobile Instructors Desk

Model Number: ATMTD2454-S2L-74P-LPB-WS-SX-KS

Dimensions: Overall: 39" H x 54" W x 24” DLecturn: 39" H

Finishes: Worksurface/lectern top: KI Pearl Bisque - laminateStarlight silver metallic baseWet sand edge band

Features: 39"H binder tower with lecturn optionPerforated modesty panelLocking door on binder towerTwo adjustable shelvesMetric pullBlack grommets on lecturnLeft workstation; keyed standard - confirm orientation per furniture planKeyed seperatelyCasters





Style Name: Instruct Classroom Furniture- Custom

Model Number: Custom stand with companion table (left/right)Verify orientation in furniture plan


Ancillary A-3 (continued)


Ancillary A-3AQuantity: Refer to furniture plan



Style Name: Instruct Classroom Furniture- Custom

Model Number: Mobile lectern with angled oversail top


Finishes: Worksurface/lectern top: KI Pearl Bisque - laminateStarlight silver metallic baseWet sand edge band

Features: Locking door on binder towerTwo adjustable shelvesMetric pullBlack grommets on lecturnConfirm handed orientation per furniture plan




Type: CPU Mount

Style Name: Adjustable CPU holder

Model Number: KOCPU3

Dimensions:

Finishes: Powder coat, black only

Features: Adjustable CPU mountSteel with slide and swivel mount



Manufacturer: Surface Works or Approved Equal

Type: Interactive Conference table

Style Name: Mingle - 1/2 Boval shape

Model Number: CNMBV.4272- MT7

Dimensions: Overall: 65" x 85"top: 42" x 72" x 30"

*(1/2 boval shape not pictured)Finishes: Laminate top and standard edge (MT7)

Wilsonart: Shaker Cherry 7934-07Edge color: 059 Brown

Features: Table top and baseCredenza and universal monitor mounting hardware


Classroom Table CT-1Quantity: Refer to furniture plan


Type: Table - folding leg

Style Name: Synthesis

Model Number: S25CST/MF-KN-MT-LMT-SX


Finishes: Top: LMT Monticello Maple & matching PVC edge bandBase: Starlight silver metallic baseModesty panel: LMT Monticello Maple w/ matching edge band

Features: Cantilevered leg- foldingConcealed castersModesty panelLaminate top and matching edge bandTop edge profile: knifeNon powered

Note: Refer to furniture plan for CPU mount (A-4) locations.


Classroom Table CT-1AQuantity: Refer to furniture plan


Type: Table - Pin height adjustable


Model Number: S25CP/MF-KN-MT-LMT-SX

Dimensions: Overall: 27-32" H x 60" W x 24” D

Finishes: Top: LMT Monticello Maple & matching PVC edge bandBase: Starlight silver metallic base

Features: Cantilevered legConcealed castersModesty panelLaminate top and matching edge bandTop edge profile: knifeNon poweredAdjustable height



Classroom Table CT-1BQuantity: Refer to furniture plan


Type: Table - Folding leg





Features: Cantilevered leg- foldingConcealed castersModesty panelLaminate top and matching edge bandTop edge profile: knifeNon powered



Classroom Table CT-1CQuantity: Refer to furniture plan


Type: Table





Features: Cantilevered legConcealed castersLaminate top and matching edge bandNo Modesty panelBelow counter: wire management trough (trough only, no operating doors/coversallowed)Include grommet per computer (2) per table



Classroom Table CT-1DQuantity: Refer to furniture plan


Type: Table





Features: Cantilevered legConcealed castersNo modesty panelLaminate top and matching edge bandTop edge profile: knifeNon poweredBelow counter: wire management trough (trough only, no operating doors/coversallowed)Include grommet per computer (2) per table



Classroom Table CT-1EQuantity: Refer to furniture plan


Type: Table - pin height adjustable



Dimensions: Overall: 27"-30" H x 60" W x 24” D


Features: Cantilevered legConcealed castersNo modesty panelLaminate top and matching edge bandTop edge profile: knifeNon poweredAdjustable heightBelow counter: wire management trough (trough only, no operating doors/coversallowed)Include grommet per computer (2) per table



Classroom Table CT-1FQuantity: Refer to furniture plan


Type: Table





Features: Cantilevered legConcealed castersModesty panelLaminate top and matching edge bandTop edge profile: knifeNon poweredAdjustable heightBelow counter: wire management trough (trough only, no operating doors/coversallowed)Include grommet per computer (2) per table







Model Number: S26C-KN-MT-LMT-SX



Features: Cantilevered legConcealed castersNo modesty panelLaminate top and matching edge bandBelow counter: wire management trough (trough only, no operating doors/coversallowed)Include grommet per computer (2) per table










Features: Cantilevered legConcealed castersModesty panelLaminate top and matching edge bandBelow counter: wire management trough (trough only, no operating doors/coversallowed)Include grommet per computer (2) per table





Type: Table- folding leg





Features: Cantilevered leg- folding legConcealed castersNo modesty panelLaminate top and matching edge bandTop Edge ProfileNon poweredLaminate top and matching edge bandBelow counter: wire management trough (trough only, no operating doors/coversallowed)Include (1) grommet in center per table










Features: Cantilevered legConcealed castersModesty panelLaminate top and matching edge bandTop Edge ProfileNon poweredLaminate top and matching edge bandBelow counter: wire management trough (trough only, no operating doors/coversallowed)Include (1) grommet in center per table



Classroom Table CT-3BQuantity: Refer to furniture plan







Features: Cantilevered legConcealed castersModesty panelLaminate top and matching edge bandTop Edge ProfileNon poweredLaminate top and matching edge bandBelow counter: wire management trough (trough only, no operating doors/coversallowed)Include (1) grommet in center per table



Library-Shelving End Panel EP-1

Quantity: Refer to furniture Plan

Manufacturer: Worden Company

Type: End Panel

Style: Folio Double Faced Floating End Panel

Model Number: Refer to elevation drawings for specification information, and furniture plan forlocation

Dimensions: 24"W x 90"H

Finishes: Frame: Wood-deGILDE Dark CherryHPL Insert: Wilsonart 7935-07 Shaker CherryMetal: Silver Sparkle





Type: End Panel

Style: Folio Double Facing Floating End Panel


Dimensions: 30"W x 90"H






Type: End Panel

Style: Folio Single Faced Panel


Dimensions: 12"D x 90"H






Type: End Panel

Style: Folio Single Faced End Panel


Dimensions: 12"D x 42"H



Library Shelving LS

Quantity: Refer to furniture plan for layout, and attached elevations on Sheet LS-3 forinformation


Type: Metal Library Shelving


Dimensions: Refer to furniture plan/elevations on LS (3)

Finishes: Painted: SX Starlight Silver Metallic

Features: Refer to Specifications on LS (2) for Basis of Design/Criteria


Library Shelving LS (2)


Library Shelving LS (3)

NOTE: Drawing Not To Scale


Lounge Chair LC-1Quantity: Refer to Furniture Plan


Type: Lounge Chair

Style Name: Fit

Model Number: KFI01 8217 X

Dimensions: Overall: 38" H x 38" W x 39.5” D

Finishes: Black mesh and black frame

Features: All mesh flexible/ergonomic materialNestingCantilevered steel frameSling lounge

Upholstery: Kimball

Pattern: Interstuhl Mesh

Color: FIT 8217 Black

Repeat: n/a

Content: 100% polyester Trivera CSMulti filament


Other:




Type: Lounge

Style Name: Sela Lounge Chair

Model Number: 1323/FC

Dimensions: Overall: 28.25" H x 32" W x 33.5” DSeat: 17.75"H x 23.25" W x 20.5" DArm height: 23"

Finishes: Starlight silver metallic base finish

Features: Sled base

Back, Arms, Front border Upholstery:Pallas


Color: Rimagna

Repeat: 7 1/4 V x 6 7/8" H

Content: 53% polysester, 47% rayon; Nano-tex/Light Acrylic finish/backing

Yards Required: 4.5 (back arms, front border) 1.25 (seat)Confirm with furniture manufacturer

Seat Upholstery: Maharam


Color: 011 Tranquil

Repeat: n/a

Content: 100% vinyl



Lounge Chair LC-2AQuantity: Refer to Furniture Plan


Type: Lounge

Style Name: Sela Lounge Chair


Dimensions: Overall: 28.25" H x 32" W x 33.5” DSeat: 17.75"H x 23.25" W x 20.5" DArm height: 23"


Features: Sled base

Upholstery: Pallas(Arms, Back, Front panel)Pattern: Ravenna 27.153.062

Color: Rimagna

Repeat: 7 1/4 V x 6 7/8" H





Color: 008 Lawn

Repeat: n/a

Content: 100% vinyl





Type: Lounge

Style Name: Sela Lounge Chair and a Half


Dimensions: Overall: 31" H x 38" W x 38.25” DSeat: 18.25"H x 26" W x 22" DArm height: 24.75"


Features: Sled base



Color: Rimagna

Repeat: 7 1/4 V x 6 7/8" H





Color: 010 Tranquill

Repeat: n/a

Content: 100% vinyl





Type: Lounge

Style Name: Sela Lounge Chair and a Half


Dimensions: Overall: 31" H x 38" W x 38.25” DSeat: 18.25"H x 26" W x 22" DArm height: 24.75"


Features: Sled base



Color: Rimagna

Repeat: 7 1/4 V x 6 7/8" H





Color: 008 Lawn

Repeat: n/a

Content: 100% vinyl




Manufacturer: National Office or Approved Equal

Type: Armless lounge chair

Style Name: Swift - One Seat

Model Number: N95MA

Dimensions: Overall: 32.5" H 26.5" W x 30" D

Finishes: Polished Aluminum leg

Features:

Upholstery: Maharam(Seat/Back)Pattern: Coincide 465808

Color: 004 Bungalow

Repeat: 10"V x 14 1/4" H

Content: 100% polyester; stain resistant


Other:




Type: Armless lounge chair

Style Name: Swift - One Seat

Model Number: N95MA

Dimensions: Overall: 32.5" H 26.5" W x 30" D

Finishes: Polished Aluminum leg

Upholstery: Bernhardt Textiles(Back)Pattern: Wing 3374-974

Color: Gulf

Repeat: 5" V x 0" H

Content: 41% rayon, 37% polyester, 22% cotton




Color: 011 Tranquil

Repeat: n/a

Content: 100% vinyl


Other:




Type: Tablet arm lounge chair

Style Name: Swift - One Seat Lounge

Model Number: N95AALR (right)

Dimensions: Overall: 32.5" H 32" W x 30" DSeat: 19.5" H

Finishes: Polished Aluminum legDark wood laminate tablet

Features:

Upholstery: Momentum(Arms, Back, Front panel)Pattern: Exes

Color: Composure

Repeat: 9"L x 9 1/8" W

Content: 48% polyester, 41% cotton, 14% wool,2% nylon




Color: 008 Lawn

Repeat: n/a

Content: 100% vinyl




Manufacturer: Arcadia or Approved Equal

Type: Modular banquette

Style Name: Hush Private Modular Series-High Back

Model Number: Qty(4) #5590

Dimensions: Modular Unit: 45.5" H 24.5" W x 33.5" DSeat: 17.5" HOverall: 98" W

Finishes: #90 Metallic Silver

Features: (4) 5590 units total ganged togetherEngineered hardwood frameFor modular configuration, lounge units are connected using shared legsFixed seat cushionArmless



Color: Glitter

Repeat: 7/8"L x 3/8" W

Content: 100% polyester

Yards Required: 3.75 (per piece) Verify with manufacturer


Ottoman OM-1Quantity: Refer to Furniture Plan

Manufacturer: Andreu World America or Approved Equal

Type: Ottoman

Style Name: Zen Round ottoman

Model Number: RS0345

Dimensions: Overall: 39.5" Diameter x 14" H

Finishes: Base: Wood- Beech 372

Features:

Upholstery: Pallas

Pattern: Unraveled 27.168.085

Color: Citrine

Repeat: n/a

Content: 100% biodegradable polyurethane surface


Other:


Ottoman OM-1AQuantity: Refer to Furniture Plan


Type: Ottoman





Features:

Upholstery: Pallas


Color: Midnight

Repeat: n/a



Other:


Ottoman OM-1BQuantity: Refer to Furniture Plan


Type: Ottoman





Features:

Upholstery: Pallas


Color: Mango

Repeat: n/a



Other:


Ottoman OM-2Quantity: Refer to Furniture Plan


Type: Ottoman



Dimensions: Overall: 14" H x 19.75" W x 19.75" D


Features:

Upholstery: Pallas


Color: Citrine

Repeat: n/a



Other:


Ottoman OM-2AQuantity: Refer to Furniture Plan


Type: Ottoman





Features:

Upholstery: Pallas


Color: Midnight

Repeat: n/a



Other:


Ottoman OM-2BQuantity: Refer to Furniture Plan


Type: Ottoman





Features:

Upholstery: Pallas


Color: Mango

Repeat: n/a



Other:


Bench B-1Quantity: Refer to Furniture Plan


Type: Two Seat Bench

Style Name: Avesa - Two seat bench with center table

Model Number: 7302-CT-NS

Dimensions: Overall: 17.5" H x 67" W x 22.5" D

(image does not show table)Finishes: #90 Metallic silver legs

Upholstered seatLaminate - Wilsonart 7122T-07 empire mahogany (std)

Features: Two seat bench with center tableNon skid glides

Upholstery: Momentum Textiles

Pattern: Flux

Color: Koa

Repeat: 6-3/4" L x 6-3/4" W

Content: 70% cotton, 26% nylon, 4% rayon

Yards Required: 3ydsConfirm with furniture manufacturer

Other:


Bench B-1AQuantity: Refer to Furniture Plan


Type: Two Seat Bench

Style Name: Avesa - Two seat bench with center table

Model Number: 7302-CT-NS

Dimensions: Overall: 17.5" H x 67" W x 22.5" D

(image does not show table)Finishes: #90 Metallic silver legs

Upholstered seatLaminate - Wilsonart 7122T-07 empire mahogany (std)

Features: Two seat bench with center tableNon skid glides

Upholstery: Pallas


Color: Mango

Repeat: n/a


Yards Required: 3ydsConfirm with furniture manufacturer

Other:




Type: Modular Bench

Style Name: Avesa - Modular bench

Model Number: (Qty 2) 5045-ER-NS Quarter Round End Table, Right(Qty 2) 5045-LR-NS Quarter Round End Table, Left(Qty 8) 5001-C-NS Modular Lounge Unit Sculpted Wood Back - In Line Unit

Dimensions: 5045-ER/LR Overall: 16" H x 26.5" W x 26.5" D5001-C Overall: 33"H (back) x 22" W x 26" D (seat: 17.5" H)

Finishes: #90 Metallic silver legsUpholstered seat/ wood backLaminate - Wilsonart 7122T-07 empire mahogany (std)

Features: *Similar to image shown except: contains 8 total upholstered seatsNon skid glidesEngineered hardwood frameSculpted wood baseFixed seat cushionsFixed metal legInclude pricing for all necessary/applicable ganging devices

Upholstery: Momentum Textiles(Seats)Pattern: Jolt

Color: Aloe

Repeat: 1-3/8" L

Content: 52% polyester, 22% cotton13% recycled polyester, 13% rayon

Yards Required: 1.5yds per upholstered pieceConfirm with furniture manufacturer

Other:




Type: Round Bench

Style Name: Avesa - Modular bench

Model Number: (Qty 4) 5080-NS Modular Quarter Round Bench (upholstered)

Dimensions: 5080 Overall: 17.5" H x 29" W x 29" D (each piece)

Finishes: #90 Metallic silver legsUpholstered seat

Features: Non skid glidesEngineered hardwood frameSculpted wood baseFixed seat cushionsFixed metal legInclude pricing for all necessary/applicable ganging devices

Upholstery: Pallas


Color: Mango

Repeat: n/a


Yards Required: 1.75yds per upholstered pieceConfirm with furniture manufacturer

Other:


Occassional Table OT-1Quantity: Refer to Furniture Plan

Manufacturer: Harter or Approved Equal

Type: Occassional table

Style Name: Penny

Model Number: T69F12FH

Dimensions: Overall: 26" H x 20" W x 15" D

Finishes: Mirror frame (std)Dark Chocolate LaminateUF Coffee urethane edge

Features: Glides (std)Modified X Base- cast aluminumLaminate surface with molded urethane edgeFixed height


Occassional Table OT-2Quantity: Refer to Furniture Plan


Type: Occasional drum table

Style Name: Cylinder Table

Model Number: 112-1818

Dimensions: Overall: 18" Diameter

Finishes:#90 Metallic Silver LegLaminate: Wilsonart Empire Mahogany 7122T-07

Features: Glides (std)



Manufacturer: Forms and Surfaces or Approved Equal

Type: Information Kiosk

Style Name: Profile One Information Kiosk

Model Number:

Dimensions:

Finishes:

Features: (1) Adjustable foot assembly(1) Mast(1) Mounting bracket(2) Semi circular table tops assembly(2) CPU Enclosures(2) Semi Circular Footrest assembly(1) Fixed foot assembly


Ancillary (continued) A-5



Manufacturer: Tournesol Siteworks or Approved Equal

Type: Square Planter

Style Name: Urban Collection

Model Number: UR-2400

Dimensions: Overall: 27" H x 24" W x 24" DInterior: 20" (top) 16.5" (bottom)

Finishes: Fiberglass - MMP Iron (std)

Features: FRP - Square




Type: Wall mounted computer station

Style Name: V7 Wall Station

Model Number: V7

Dimensions:


Features: 51" total height adjustment rangeMonitor arm extends 36" from wallKeyboard platform extends 47" from wallKeyboard and monitor can be stored within 8" of wall





Style Name: Seek

Model Number: K-PUGA-SBU


Finishes: Silver frame, Surf poly back

Features: Poly backUpholstered seatCarpet castersStackable (up to 8 high for stationary storage)Nesting

Upholstery: Knoll

Pattern: Fibra


Repeat: 5" V x 7" H



Other:


Side Chair SC-9AQuantity: Refer to Furniture Plan



Style Name: Seek

Model Number: K-PUGA-SGN


Finishes: Silver frame, Sprout poly back

Features: Poly backUpholstered seatCarpet castersStackable (up to 8 high for stationary storage)Nesting

Upholstery: Maharam

Pattern: Offset 465951

Color: 005 Oasis

Repeat: 8" V x 9 1/8" H

Content: 40% cotton, 36% nylon, 24% wool


Other:





Style Name: Seek

Model Number: K-PUGO-SBU


Finishes: Silver frame, Surf poly back

Features: Poly backUpholstered seatCarpet castersStackable (up to 8 high for stationary storage)NestingArms

Upholstery: Knoll

Pattern: Fibra


Repeat: 5" V x 7" H



Other:


Side Chair SC-10AQuantity: Refer to Furniture Plan



Style Name: Seek

Model Number: K-PUGO-SGN


Finishes: Silver frame, Sprout poly back

Features: Poly backUpholstered seatCarpet castersStackable (up to 8 high for stationary storage)NestingArms

Upholstery: Maharam

Pattern: Offset 465951

Color: 005 Oasis

Repeat: 8" V x 9 1/8" H

Content: 40% cotton, 36% nylon, 24% wool


Other:



Manufacturer: Worden or Approved Equal

Type: Custom Computer Table

Style Name: Custom

Model Number:

Dimensions: See Attached drawing84" Diameter Primary Worksurface30" Diameter Raised Worksurface20" above Primary worksurface

Finishes: Laminate tops: Wilsonart Shaker Cherry 7935-07Matching edge band

Features: See attached drawing for dimensions and specific features


Table Attached drawing (not to scale) T-7


Table T -7AQuantity: Refer to Furniture Plan

Manufacturer: Worden or Approved Equal

Type: Custom Computer TableHalf Round

Style Name: Custom

Model Number:

Dimensions: See Attached drawing T-784" W x 42"D Primary Work surface30"W x 15"D Raised Worksurface20" above Primary worksurface

Finishes: Laminate tops: Wilsonart Shaker Cherry 7935-07Matching edge band

Features: See attached drawing for dimensions and specific features



Manufacturer: Worden Company or Approved EQ.

Type: Library Study Table

Style Name: Folio - Floating Panel Table w/ divderAnd power/data center

Model Number: F-4890-CDC-FP-C-1 (Table)F-PD Double Faced Power/Data w/ 9' cord, jack


Finishes: Laminate tops: Wilsonart Shaker Cherry 7935-07Matching edge bandMetal Leg: Sparkle SilverLeg Panel:Laminate (to match wood veneer: deGILDE Dark Cherry)Divider: 3Form: Varia; Ecoresin; connection envy; thickness per mfr.recommendations); finish- front/back: sandstone

Features: Powered table- include power/data centerTop profiile:Laminate top3Form divider panelRefer to A-4 on plan for CPU mount locations.


Table T-8AQuantity: Refer to Furniture Plan



Style Name: Folio - Floating Panel Table

Model Number: F-4890-FP-C-1 (Table) Does not include divider panel as shown*Product similar to image


Finishes: Laminate tops: Wilsonart Shaker Cherry 7935-07Matching edge bandMetal Leg: Sparkle SilverLeg Panel:Laminate Wilsonart Shaker Cherry 7935-07

Features: Laminate topNo divider/non powered


Table T-8BQuantity: Refer to Furniture Plan



Style Name: Folio - Floating Panel TableDouble Faced Carrel Rack

Model Number: F-4872-DC36-B-C (Table)F-GR (Grommet with cover) *Product similar to image



Features: Laminate topNo divider/non powered


Table T-8CQuantity: Refer to Furniture Plan



Style Name: Folio - Floating Panel TableSingle Faced Carrel Rack

Model Number: F-3060-FC-36-FP-C-1(Table)*Product similar to image



Features: Laminate topDividers


Table T-9Quantity: Refer to furniture plan


Type: Desk

Style Name: Enlite- Swash Table 3/4" top w/ Fixed Leg

Model Number: ENSW2460AD-73P-MF-4GB-LMT-SXwith modesty panel *Product similar to image

Dimensions: Overall: 20" x 60" x 25 3/4"

Finishes: Worksurface: Brighton Walnut LaminateStarlight Silver Frame

4 Glides

Features: Laminate topNo divider/non poweredwith perforated metal modesty panel


Student Desk SD-3Quantity: Refer to Furniture Plan

Manufacturer: Worden Company or Approved Equal

Type: Study Carrel

Style Name: Folio with Floating Panel Side Panel

Model Number:

Dimensions: Overall: 44 7/8" H x 36" W x 24" DTableHeight: 29" H

*similar to image shownFinishes: Laminate tops: Wilsonart Shaker Cherry 7935-07

Matching PVC Edge Banding

Features: Include Pricing for Task LightingStraight edge profile with matching edge bandSingle facedStarter/Adders (see plan for quantities)Laminate surfaces



Manufacturer: Bretford or Approved Equal

Type: Laptop storage

Style Name: Bretford Basics

Model Number: LAP30EBA-GM

Dimensions: Overall: 47.25" H x 12" W x 17” D

Finishes: Black

Features: Rear electrical units5" casters

Pre Assembled notebook storage cart shall have (1) 42.25"w x 24"d, 18 guagesteel work surface shelf which shall have (2) 2" diameter grommet holes in rearof shelf. The underside of the work surface shall have (1) 18 guage stiffenerwith (2) 28.5mm holes for optional security cable. Work surface shall becovered with black rubber mat. Cart shall also have (1) 42.25" w x 24"d, 18guage steel bottom shelf, (9) 40.25"w x 17"d, 18 guage interior shelves, (2) 34-3/8"h x 18.5"w, 20 guage outer and inside panels, (1) 40.5"w x 34-3/8"d, 20guage back panel and (2) 34-3/8"w x 20-1/8"d, 20 guage doors. Doors shallhave multiple-point locking system with re-programmable, three dialcombination padlock. Interior shelves shall have 2x2 cut outs in rear corners.Back panel has (2) 2" diameter grommet holes located at the bottom rear andon outside back panel there are (2) cord winders for cord management. Backpanel also have two cut outs to accommodate the automatic timer near thebottom of the cart. All panels shall have ventilation holes throughout.

Unit shall have (2) UL listed, 15 outlet electrical units which shall be attachedinside the cart to top and bottom shelves. Electrical units can be orderedinstalled inside the fron or back of the cart. Unit also shall have (1) three outletelectrical unit which attaches to the back of the unit. Unit has (4) 5" platecasters, two rigid and one swivel with locking brakes. Cart shall have (2) pushhandles. Each model painted in grey poweder coated paint and constructedfrom 'prime' steel which contains 25% to 35% post consumer materials. Shipspre-assembled by truck only.Electrical units are UL listed, overload protected, includes a 20' power cord, and

exceed 12 amps of usage each for an extended period of time.

have an on/off switch located at the base. When using both electrical units atthe same time, each unit must be plugged into outlets on separate electricalcircuits. This is to prevent the overload and tripping of the circuit breaker. Theelectrical units are rated for a maximum of 15 amps usage each, however toprevent nuisance tripping of the breaker you should not


Task Chair TC-6Quantity: Refer to Furniture Plan

Manufacturer: KI - No substitutions

Type: Task Chair High Back

Style Name: Impress Ultra High Back

Model Number: K178/JR30-NF-SLD-NH-BL-C

Dimensions: Overall: 36.5-41.5” H x 26” WSeat: 17.75-22.25” H x 20.5” W x 19.5" D

Finishes:

Features: Mesh back - black (std)Upholstered seat (std)360 degree pivot armSeat slideno headrest/no memory foamCarpet casters


Pattern: Impact

Color: Eggplant

Repeat: .5" L x .5" W

Content: 80% post industrial recycled polyester20% olefin

Yards Required: 1 yd (<5 chairs; >5 chairs it is 3/4 yd)Confirm with furniture manufacturer

Other:


Task Chair TC-6AQuantity: Refer to Furniture Plan






Finishes:



Pattern: Classic Impression

Color: Black

Repeat: n/a

Content: 100% nylon


Other:


Task Chair TC-6BQuantity: Refer to Furniture Plan






Finishes:



Pattern: Impact

Color: Sprout




Other:


Task Chair TC-6CQuantity: Refer to Furniture Plan






Finishes:



Pattern: Impact

Color: Relic




Other:


Task Chair TC-6DQuantity: Refer to Furniture Plan






Finishes:



Pattern: Impact

Color: Chocolate




Other:


Task Chair TC-6EQuantity: Refer to Furniture Plan






Finishes:



Pattern: Impact

Color: Serene




Other:


Task Chair TC-6FQuantity: Refer to Furniture Plan






Finishes:



Pattern: Impact

Color: Sesame




Other:


Task Chair TC-6GQuantity: Refer to Furniture Plan






Finishes:



Pattern: Impact

Color: Grotto




Other:





Style Name: Impress Ultra High Back (no arms)

Model Number: K178/NA-NF-SLD-NH-BL-C


Finishes:

Features: Mesh back - black (std)Upholstered seat (std)No armsSeat slideno headrest/no memory foamCarpet casters


Pattern: Impact

Color: Sesame




Other:





Style Name: Impress Ultra Stool (no arms)

Model Number: K175/NA-NF-SLD-NH-BL-C

Dimensions: Overall: 43-57” H x 26” WSeat: 22.25-30” H x 20.5” W x 19.5" D

Finishes:

Features: Mesh back - black (std)Upholstered seat (std)No ArmsSeat slideno headrest/no memory foamCarpet castersChrome plated 20" footring


Pattern: Impact

Color: Sprout




Other:



Manufacturer: Allsteel -No Substitutions

Type: Task Chair

Style Name: #19

Model Number: A19-HWG

Dimensions: Overall: 40-45” H x 26.5” W x 27” DSeat: 17.374-22.375” H x 22.25” W x16.75-18.25" D

Finishes: Graphite frame

Features: Mesh back (std)Upholstered seat (std)5 star base with multi surface casters (std)Pneumatic height adjustment (std)Seat depth adjustment (std)Tilt limiting lever (std)Adjustable armrests (std)

Upholstery: Maharam (Graded in- Grade G)

Pattern: Ledger

Color: SMHMLDG16 (black)

Repeat: n/a

Content: 100% polyurethane


Other:




Type: Task Chair

Style Name: #19

Model Number: A19-HWG

Dimensions: Overall: 40-45” H x 26.5” W x 27” DSeat: 17.374-22.375” H x 22.25” W x16.75-18.25" D

Finishes: Graphite frame

Features: Mesh back (std)Upholstered seat (std)5 star base with multi surface casters (std)Pneumatic height adjustment (std)Seat depth adjustment (std)Tilt limiting lever (std)Adjustable armrests (std)

Upholstery: Maharam


Color: 006 Cloudburst

Repeat:

Content:


Other:




Type: Task Chair

Style Name: Acuity

Model Number: AWFG-GD-NO-P71-2-H-Brisa-S

Dimensions: Overall: 41-46.5” H x 26.5” W x 25” DSeat: 16.75-21.75” H x 19” W x15.5-18.5" D

Finishes:

Features: Upholstered back and seatFully adjustable arms, fabric, graphite chassisBlack polymer base, standard pneumatic cylinderBlack dual wheel hard casters for carpetStandard poly arm pads

Upholstery: Allsteel

Pattern: Brisa

Color: Sage

Repeat: n/a


Yards Required: 2 ydsConfirm with furniture manufacturer

Other:



Manufacturer: Herman Miller- No Substitutions

Type: Task Chair

Style Name: Aeron- Size B

Model Number: AE111A-F-B*-N2-G1-BB-BK

Dimensions: Overall: 42” H x 27” WSeat: 15-20 7/8" H x 20.25” W x 17 " D

Finishes: Graphite base/frame

Features: Standard tiltFully adjustable arms, leather pads (black)Hard casters (carpet)




Type: Task Chair

Style Name: Aeron- Size C

Model Number: AE111A-F-C*-N2-G1-BB-BK

Dimensions: Overall: 45” H x 28.25” WSeat: 15-20 7/8" H x 21 5/8” W x 18.5 " D


Features: Standard tiltFully adjustable arms, leather pads (black)Hard casters (carpet)




Type: Task Chair

Style Name: Mirra

Model Number: MR121-A-F-M*-N2-G1-BB-G1-BK

Dimensions: Overall: 42.75” H x 27” WSeat: 16-20.5" H x 19.75” W x 17" D

Finishes: Graphite base/frameBack: Graphite

Features: Standard tiltFully adjustable arms, leather pads (black)Hard casters (carpet)Standard height rangeFixed seat depthTri flex polymer back; no addt'l back support




Type: Task Chair

Style Name: Aeron- Low Stool

Model Number: AE711A-F-B-N2-ZB-BB-BK

Dimensions: Overall: ” H x 27” W x 17" DSeat: 24.5-29" H x 20.25” W x 17 " D


Features: Low stoolStandard tiltFully adjustable arms, leather pads (black)Hard casters (carpet)



Manufacturer: Harter - No Substitutions

Type: Task Chair Mid Back

Style Name: Anthro KB

Model Number: G98A68KB

Dimensions: Overall: 36-41” H x 26.5” W x 26” DSeat: 16-21” H x 19.5” W x 18.5" DArm: 25.75-31" H

Finishes: Black nylon base #85 (std)Pewter mesh (back)Brisa Truffle (seat)

Features: Arms- self skinning urethane- black #85 (std)T-Arm (height/width adj. T Arms)Slider seat (FX); upholsteredSwivel tiltHard wheel casters

Upholstery: Harter

Pattern: Brisa

Color: Truffle

Repeat: n/a


Yards Required: 1 ydConfirm with furniture manufacturer

Other:



Manufacturer: Harter - No Substitutions

Type: Task Chair Mid Back

Style Name: Anthro KB

Model Number: G98A68KB

Dimensions: Overall: 36-41” H x 26.5” W x 26” DSeat: 16-21” H x 19.5” W x 18.5" DArm: 25.75-31" H

Finishes: Black nylon base #85 (std)Pewter mesh (back)Brisa Truffle (seat)

Features: Arms- self skinning urethane- black #85 (std)T-Arm (height/width adj. T Arms)Slider seat (FX); upholsteredSwivel tiltHard wheel casters

Upholstery: Harter

Pattern: Impact

Color: Relic


Content: 80% post industrial recycled polyester,20% olefin

Yards Required: 1 ydConfirm with furniture manufacturer

Other:

TABLE OF CONTENTS - East Central College · [email protected] Lindsay Underwood,...

Documents

Transcript of TABLE OF CONTENTS - East Central College · [email protected] Lindsay Underwood,...