Tabla Sellos Mecanicos
description
Transcript of Tabla Sellos Mecanicos
DS1
1012141516181920222425283032333538404345485053555860636568707580859095100
19,0021,0023,0024,0026,0029,0031,0031,0033,0035,0036,0040,0043,0046,0046,0049,0053,0056,0059,0061,0064,0066,0069,0071,0076,0078,0081,0084,0088,0090,0098,00100,00107,50111,00119,00124,00
15,0018,0022,0022,0023,0024,0025,0025,0025,0027,0027,0029,0030,0030,0039,0039,0042,0042,0047,0047,0047,0046,0056,0056,0056,0056,0056,0066,0064,0064,0064,0072,0072,0072,0072,0072,00
21,0023,0025,0027,0027,0033,0035,0035,0037,0039,0040,0043,0045,0048,0048,0050,0056,0058,0061,0063,0066,0070,0073,0075,0078,0080,0083,0085,0090,0092,0097,00105,00110,00115,00120,00125,00
7,007,007,007,007,0010,0010,0010,0010,0010,0010,0010,0010,0010,0010,0010,0013,0013,0013,0013,0013,0014,0014,0014,0014,0014,0014,0014,0016,0016,0016,0018,0018,0018,0018,0018,00
17,0019,0021,0023,0023,0027,0029,0029,0031,0033,0034,0037,0039,0042,0042,0044,0049,0051,0054,0056,0059,0062,0065,0067,0070,0072,0075,0077,0081,0083,0088,0095,00100,00105,00110,00115,00
22,0025,0029,0029,0030,0034,0035,0035,0035,0037,0037,0039,0040,0040,0049,0049,0055,0055,0060,0060,0060,0060,0070,0070,0070,0070,0070,0080,0080,0080,0080,0090,0090,0090,0090,0090,00
d1 d3 l3 d7 l4 d6 l1
Characteristics:Single Spring Seal
Conical SpringSingle Directional
UnbalancedAccording to DIN 24960
Limit of applications:Pressure p = 10 bar
Speed v = 15 m/sec.Temperature t = -20+180°C
• Rotary = Stainless Steel• Stationary = Carbon
• Secondary Seal = NBR, EPDM, VITON®, FEP, KALREZ®
• Spring = AISI 316, 304• Other Parts = AISI 316, 304
Características:Sello monoresorte
Resorte cónicoUnidireccional
No balanceadoSegún norma DIN 24960
Limite de aplicaciones:Presión p = 10 bar
Velocidad v = 15 m/sec.Temperatura t = -20+180°C
• Rotativo = Acero inoxidable• Estacionario = Carbón
• Sello secundario = NBR, EPDM, VITON®, FEP, KALREZ®
• Resorte = AISI 316, 304• Otras partes = AISI 316, 304
ESPAÑOL ENGLISH
WWW.DAY-SEAL.COM Las dimensiones en este catálogo está n expresadas en milímetros y se encuentran sujetas a variaciones o modificaciones sin previo aviso
The dimensions in this catalog are expressed in millimeters and are subject to changes or modifications without notice
DS2
68810111213141516161718192020222425283032353840455055606570
18,0018,0024,0024,0024,0024,0024,0032,0035,0035,0039,0039,0039,0039,0039,0042,0042,0047,0047,0054,0054,0054,0060,0065,0065,0070,0085,0085,00105,00105,00105,00
8,508,5011,0011,0011,0013,0013,0013,0013,0013,0013,0013,0013,0013,0013,0013,0014,0014,0014,0015,0015,0015,0016,0017,0017,0020,0023,0023,0030,0030,0032,00
22,0022,0026,0026,0026,0026,0026,0029,5/3829,5/3829,5/3842,0042,0042,0042,0042,0045,0045,0050,0050,0057,0057,0057,0063,0068,0068,0073,0088,0088,00110,00110,00110,00
4,004,005,5/85,5/85,5/85,5/85,5/88,008,008,008,008,008,008,008,0010,0010,0010,0010,0010,0010,0010,0010,0012,0012,0012,0015,0015,0015,0015,0015,00
8,0010,0010,0012,0013,0014,0015,0016,0017,0018,0018,0019,0020,0021,0022,0022,0024,0026,0027,0031,0033,0035,0038,0041,0043,0048,0053,0053,0063,0067,0072,00
12,5012,5016,5/1916,5/1916,5/1918,5/2118,5/2121,0021,0021,0021,0021,0021,0021,0021,0023,0024,0024,0024,0025,0025,0025,0026,0029,0029,0032,0038,0038,0045,0045,0047,00
d1 d3 l3 d7 l4 d6 l1
Characteristics:Single Spring Seal
Bellow SealDouble Directional
Unbalanced
Limit of applications:Pressure p = 6 bar
Speed v = 10 m/sec.Temperature t = -20+120°C
• Rotary = Carbon, SiC, TC• Stationary = Al-Oxide, SiC, TC• Secondary Seal = NBR, EPDM,
VITON®• Spring = AISI 304
• Other Parts = AISI 304
Características:Sello monoresorte
Sello de fuelleBidireccional
No balanceado
Limite de aplicaciones:Presión p = 6 bar
Velocidad v = 10 m/sec.Temperatura t = -20+120°C
• Rotativo = Carbón , SiC, TC• Estacionario = Cerámica, SiC, TC
• Sello secundario = NBR, EPDM, VITON®
• Resorte = AISI 304• Otras partes = AISI 304
ESPAÑOL ENGLISH
WWW.DAY-SEAL.COM Las dimensiones en este catálogo están expresadas en milímetros y se encuentran sujetas a variaciones o modificaciones sin previo aviso
The dimensions in this catalog are expressed in millimeters and are subject to changes or modifications without notice
DS3
101214151618202224252830323335384043454850535558606568707580859095100
24,0024,0028,0028,0028,0031,0036,0036,0040,5041,0047,0047,0051,0051,0055,0058,0060,0063,0065,0069,0071,0076,0078,0082,0085,0090,0094,0097,00102,00108,00117,00126,00131,00136,00
14,5015,0017,0017,0017,0019,5021,5021,5022,5023,0026,5026,5027,5027,5028,5030,0030,0030,0030,0030,5030,5033,0035,0037,0038,0040,0040,0040,0040,0040,0041,0045,0046,0047,00
21,0023,0025,0027,0027,0033,0035,0037,0039,0040,0043,0045,0048,0048,0050,0056,0058,0061,0063,0066,0070,0073,0075,0078,0080,0085,0090,0092,0097,00105,00110,00115,00120,00125,00
6,606,606,606,606,607,507,507,507,507,507,507,507,507,507,509,009,009,009,009,009,5011,0011,0011,0011,0011,0011,3011,3011,3012,0014,0014,0014,0014,00
17,0019,0021,0023,0023,0027,0029,0031,0033,0034,0037,0039,0042,0042,0044,0049,0051,0054,0056,0059,0062,0065,0067,0070,0072,0077,0081,0083,0088,0095,00100,00105,00110,00115,00
21,1021,6023,6023,6023,6027,0029,0029,0030,0030,5034,0034,0035,0035,0036,0039,0039,0039,0039,0039,5040,0044,0046,0048,0049,0051,0051,3051,3051,3052,0055,0059,0060,0061,00
d1 d3 l3 d7 l4 d6 l1
Characteristics:Single Spring Seal
Bellow SealDouble Directional
UnbalancedAccording to DIN 24960
Limit of applications:Pressure p = 12 bar
Speed v = 10 m/sec.Temperature t = -20+120°C
• Rotary = Carbon, SiC, TC• Stationary = Al-Oxide, Carbon,
SS, SiC, TC• Secondary Seal = NBR, EPDM,
VITON®• Spring = AISI 316
Características:Sello monoresorte
Sello de fuelleBidireccional
No balanceadoSegún norma DIN 24960
Limite de aplicaciones:Presión p = 12 bar
Velocidad v = 10 m/sec.Temperatura t = -20+120°C
• Rotativo = Carbón , SiC, TC• Estacionario = Cerámica, Carbón,
Acero Inoxidable , SiC, TC• Sello secundario = NBR, EPDM,
VITON®• Resorte = AISI 316
ESPAÑOL ENGLISH
WWW.DAY-SEAL.COM Las dimensiones en este catálogo están expresadas en milímetros y se encuentran sujetas a variaciones o modificaciones sin previo aviso
The dimensions in this catalog are expressed in millimeters and are subject to changes or modifications without notice
DS4-D
1214161820222425283032333538404345485053555860636568707580859095100
21,7023,9026,7030,4033,4033,4038,0039,3042,0043,9545,8045,8049,0052,8055,8058,8061,0064,0066,0070,6571,6578,4078,4081,5084,3089,6589,6596,80104,00107,95111,10119,00124,00
23,9026,4026,4027,5027,5027,5030,0030,0032,5032,5032,5032,5032,5034,0034,0034,0034,0034,0034,5034,5034,5039,5039,5039,5039,5037,2037,2044,7044,3044,3049,3049,3049,30
23,0025,0027,0033,0035,0037,0039,0040,0043,0045,0048,0048,0050,0056,0058,0061,0063,0066,0070,0073,0075,0078,0080,0083,0085,0090,0092,0097,00105,00110,00115,00120,00125,00
8,608,608,6010,0010,0010,0010,0010,0010,0010,0010,0010,0010,0011,0011,0011,0011,0011,0013,0013,0013,0013,0013,0013,0013,0015,3015,3015,3015,7015,7015,7015,7015,70
19,0021,0023,0027,0029,0031,0033,0034,0037,0039,0042,0042,0044,0049,0051,0054,0056,0059,0062,0065,0067,0070,0072,0075,0077,0081,0083,0088,0095,00100,00105,00110,00115,00
32,5035,0035,0037,5037,5037,5040,0040,0042,5042,5042,5042,5042,5045,0045,0045,0045,0045,0047,5047,5047,5052,5052,5052,5052,5052,5052,5060,0060,0060,0065,0065,0065,00
d1 d3 l3 d7 l4 d6 l1
Characteristics:Single Spring Seal
Bellow SealDouble Directional
Unbalanced
Limit of applications:Pressure p = 12 bar
Speed v = 10 m/sec.Temperature t = -20+120°C
• Rotary = Carbon, SiC, TC• Stationary = Al-Oxide, SiC
• Secondary Seal = NBR, EPDM, VITON®
• Spring = AISI 304• Other Parts = AISI 304
Características:Sello monoresorte
Sello de fuelleBidireccional
No balanceado
Limite de aplicaciones:Presión p = 12 bar
Velocidad v = 10 m/sec.Temperatura t = -20+120°C
• Rotativo = Carbón , SiC, TC• Estacionario = Cerámica, SiC
• Sello secundario = NBR, EPDM, VITON®
• Resorte = AISI 304• Otras partes = AISI 304
ESPAÑOL ENGLISH
WWW.DAY-SEAL.COM Las dimensiones de este catálogo estan expresadas en milímetros y se encuentran sujetas a variaciones o modificaciones sin previo aviso
The dimensions in this catalog are expressed in millimeters and are subject to changes or modifications without notice
DS4
12,7015,8019,1022,2025,4028,6031,7034,9038,1041,2044,4047,6050,8053,9057,1060,3063,5066,6069,8073,0076,20
22,0026,0032,0036,0039,0042,0046,0049,0054,0059,0061,0064,0066,0069,0078,0080,0083,0085,0090,0095,0099,00
20,6222,2222,2223,8025,4026,9726,9728,5828,5834,9334,9338,1038,1042,8842,8846,0246,0249,2049,2052,3752,37
25,4031,7534,9338,1041,2844,4447,6350,8053,9860,3363,5066,6869,8576,2079,3882,5585,7385,7388,9095,2598,43
7,9310,2810,2810,2811,1011,1011,1011,1011,1012,7012,7012,7012,7014,2814,2814,2814,2815,9015,9015,9015,90
19,0523,8026,9830,1533,3236,5039,7042,8446,0550,8053,9757,1560,3260,3261,9067,3968,0071,4274,6077,7780,95
28,5532,5032,5034,0836,5038,0738,0739,6839,6847,6347,6350,8050,8057,1657,1660,3060,3065,1065,1068,2768,27
d1 d3 l3 d7 l4 d6 l1
Characteristics:Single Spring Seal
Bellow SealDouble Directional
Unbalanced
Limit of applications:Pressure p = 12 bar
Speed v = 10 m/sec.Temperature t = -20+120°C
• Rotary = Carbon, SiC• Stationary = Al-Oxide, SiC
• Secondary Seal = NBR, EPDM, VITON®
• Spring = AISI 304• Other Parts = AISI 304
Características:Sello monoresorte
Sello de fuelleBidireccional
No balanceado
Limite de aplicaciones:Presión p = 12 bar
Velocidad v = 10 m/sec.Temperatura t = -20+120°C
• Rotativo = Carbón , SiC• Estacionario = Cerámica, SiC
• Sello secundario = NBR, EPDM, VITON®
• Resorte = AISI 304• Otras partes = AISI 304
ESPAÑOL ENGLISH
WWW.DAY-SEAL.COM Las dimensiones de este catálogo estan expresadas en milímetros y se encuentran sujetas a variaciones o modificaciones sin previo aviso
The dimensions in this catalog are expressed in millimeters and are subject to changes or modifications without notice
DS5
101112131415161718192022242528303233353840
19,5022,5022,5024,5024,5029,0029,0029,0032,5032,5032,5037,5037,5040,0046,0046,0046,0048,0050,0056,0058,00
15,0018,0018,0022,0022,0022,0023,0023,0024,0025,0025,0025,0027,0027,0029,0030,0030,0030,0039,0039,0039,00
18,1020,6020,6023,1023,1026,9026,9026,9030,9030,9030,9035,4035,4038,2043,3043,3043,3053,5053,5060,5060,50
5,505,505,506,006,007,007,007,008,008,008,008,008,008,509,009,009,0011,5011,5011,5011,50
14,0016,5016,5019,0019,0021,0021,0021,0025,0025,0025,0030,0030,0033,0038,0038,0038,0045,0045,0052,0052,00
20,5023,5023,5028,0028,0029,0030,0030,0032,0033,0033,0033,0035,0035,5038,0039,0039,0041,5050,5050,5050,50
d1 d3 l3 d7 l4 d6 l1
Characteristics:Single Spring Seal
Conical SpringSingle Directional
Unbalanced
Limit of applications:Pressure p = 10 bar
Speed v = 20 m/sec.Temperature t = -20+180°C
• Rotary = Al-Oxide, SiC, TC• Stationary = Carbon, SiC, TC
• Secondary Seal = NBR, EPDM, VITON®
• Spring = AISI 304• Other Parts = AISI 304
Características:Sello monoresorte
Resorte CónicoUnidireccional
No balanceado
Limite de aplicaciones:Presión p = 10 bar
Velocidad v = 20 m/sec.Temperatura t = -20+180°C
• Rotativo = Cerámica, SiC, TC• Estacionario = Carbón, SiC, TC
• Sello secundario = NBR, EPDM, VITON®
• Resorte = AISI 304• Otras partes = AISI 304
ESPAÑOL ENGLISH
WWW.DAY-SEAL.COM Las dimensiones de este catálogo estan expresadas en milímetros y se encuentran sujetas a variaciones o modificaciones sin previo aviso
The dimensions in this catalog are expressed in millimeters and are subject to changes or modifications without notice
DS6
182022242528303233353840424345485053555860636568707580859095100
34,0036,0038,0040,0041,0044,0046,0048,0049,0050,9054,8058,0058,0061,0061,0064,4067,6070,8073,0077,2077,2078,3088,2088,2091,4097,70100,90107,30110,40113,40120,00
18,0018,0018,0018,0018,0018,0018,0018,0018,0018,0018,0018,0018,0018,0018,0018,0018,0018,0018,0018,0018,0018,0018,0018,0018,0018,0018,0018,0018,0018,0018,00
30,0030,0030,0030,0030,0032,5032,5032,5032,5032,5034,0034,0034,0034,0034,0034,0034,5034,5034,5034,5034,5034,5036,0036,0036,0036,0036,0036,0036,0036,0036,00
33,0035,0037,0039,0040,0043,0045,0048,0048,0050,0056,0058,0061,0061,0063,0066,0070,0073,0075,0078,0080,0083,0085,0090,0092,0097,00105,00110,00115,00120,00125,00
10,0010,0010,0010,0010,0010,0010,0010,0010,0010,0011,0011,0011,0011,0011,0011,0013,0013,0013,0013,0013,0013,0013,0015,3015,3015,3015,7015,7015,7015,7015,70
27,0029,0031,0033,0034,0037,0039,0042,0042,0044,0049,0051,0054,0054,0056,0059,0062,0065,0067,0070,0072,0075,0077,0081,0083,0088,0095,00100,00105,00110,00115,00
40,0040,0040,0040,0040,0042,5042,5042,5042,5042,5045,0045,0045,0045,0045,0045,0047,5047,5047,5047,5047,5047,5049,0051,3051,3051,3051,7051,7051,7051,7051,70
d1 d3 l2 l3 d7 l4 d6 l1
Characteristics:Single Spring Seal
Multiple Spring SealDouble Directional
Balanced
Limit of applications:Pressure p = 25 bar
Speed v = 20 m/sec.Temperature t = -30+220°C
• Rotary = Carbon, SiC, TC• Stationary = Al-Oxide,
Carbon, SS, SiC, TC• Secondary Seal = NBR, EPDM,
VITON®, FEP, KALREZ®• Spring = AISI 316 or
Hastelloy® C, 316 Ti• Other Parts = AISI 316, 316 Ti
Características:Sello monoresorte
ó multiresorteBidireccional
Balanceado
Limite de aplicaciones:Presión p = 25 bar
Velocidad v = 20 m/sec.Temperatura t = -30+220°C
• Rotativo = Carbón, SiC, TC• Estacionario = Cerámica,
Carbón, Ac.Inox, SiC, TC• Sello secundario = NBR, EPDM,
VITON®, FEP, KALREZ®• Resorte = AISI 316 ó
Hastelloy® C, 316 Ti• Otras partes = AISI 316, 316 Ti
ESPAÑOL ENGLISH
WWW.DAY-SEAL.COM Las dimensiones de este catálogo estan expresadas en milímetros y se encuentran sujetas a variaciones o modificaciones sin previo aviso
The dimensions in this catalog are expressed in millimeters and are subject to changes or modifications without notice
DS7
1214161820222425283032333538404345485053555860636568707580859095100
25,0025,0027,0033,0035,0037,0039,0040,0043,0045,0047,0048,0050,0055,0057,0060,0062,0065,0067,0070,0072,0079,0081,0084,0086,0089,0091,0099,00104,00109,00114,00119,00124,00
25,0025,0025,0026,0026,0026,0028,5028,5031,0031,0031,0031,0031,0031,0031,0031,0031,0031,0032,5032,5032,5037,5037,5037,5037,5034,5042,0042,0041,8041,8046,8047,8047,80
23,0025,0027,0033,0035,0037,0039,0040,0043,0045,0048,0048,0050,0056,0058,0061,0063,0066,0070,0073,0075,0078,0080,0083,0085,0090,0092,0097,00105,00110,00115,00120,00125,00
10,0010,0010,0011,5011,5011,5011,5011,5011,5011,5011,5011,5011,5014,0014,0014,0014,0014,0015,0015,0015,0015,0015,0015,0015,0018,0018,0018,0018,2018,2018,2017,2017,20
19,0021,0023,0027,0029,0031,0033,0034,0037,0039,0042,0042,0044,0049,0051,0054,0056,0059,0062,0065,0067,0070,0072,0075,0077,0081,0083,0088,0095,00100,00105,00110,00115,00
35,0035,0035,0037,5037,5037,5040,0040,0042,5042,5042,5042,5042,5045,0045,0045,0045,0045,0047,5047,5047,5052,5052,5052,5052,5052,5060,0060,0060,0060,0065,0065,0065,00
d1 d3 l3 d7 l4 d6 l1
Characteristics:Single Spring SealWave Spring Seal
(multiple Spring possible)Double Directional
Unbalanced
Limit of applications:Pressure p = 16 bar
Speed v = 20 m/sec.Temperature t = -30+220°C
• Rotary = SS, Carbon, SiC, TC• Stationary = Al-Oxide,
Carbon, SiC, TC• Secondary Seal = NBR, EPDM,
VITON®, FEP, KALREZ®• Spring = AISI 316, 316 Ti
Características:Sello monoresorteResorte ondulado
(opcional resortes multiples)Bidireccional
No balanceado
Limite de aplicaciones:Presión p = 16 bar
Velocidad v = 20 m/sec.Temperatura t = -30+220°C
• Rotativo = A.Inox, Carbón , SiC, TC• Estacionario = Cerámica,
Carbón, SiC, TC• Sello secundario = NBR, EPDM,
VITON®, FEP, KALREZ®• Resorte = AISI 316, 316 Ti
ESPAÑOL ENGLISH
WWW.DAY-SEAL.COM Las dimensiones en este catálogo están expresadas en milímetros y se encuentran sujetas a variaciones o modificaciones sin previo aviso
The dimensions in this catalog are expressed in millimeters and are subject to changes or modifications without notice