Systems overview

Calibration systems

2

About us

In the past few years WIKA has successfully integrated renowned manufacturers of calibration equipment into the group. With these established brands within the calibration market, we deliver the ideal solution for each measurement task. Among these brands, Scandura enjoys a special reputation for complete calibration systems and for valve test benches. These are available in different designs and levels of automation.

3

Your competent partner for calibration systemsEfficiency in maintenance and calibration can increase when these activities are realized in an ideal working environment. Any laboratory or workshop will benefit from these bench solutions, from the harsh environment of the offshore oil & gas industry to desalination plants, from refineries to power generation plants.

Our bench concept is designed to take into account the flexibility and the expansion possibilities.

We offer complete systems from simple workbenches to complex applications featuring automatic calibrations (ISO 9000 compliant).

Calibration modules cover electronic signals, temperature, loop and pressure applications. Power supplies, multimeters, oscilloscopes and generator modules can also be fitted into the bench consoles.

A wide range of modules can be fitted to the console creating a highly flexible system that is both functional and easy to use.

The robust design and the high quality of the installed components guarantee areliable and long-lasting performance of the calibration benches.

Functions are clearly defined on each module and a competent technician will be able to operate the system without training or constant reference to manuals.

Versatile Robust Easy to use

4

Width 3,000 mmDepth 1,200 mmHeight 2,080 mmWorking surface height 945 mm

Main features

■ Pressure generation and measurement available from vacuum to 1,200 bar

■ Electrical section to generate and measure the electri-cal parameters normally used in the field of industrial instrumentation(mA/mV/V/Ω) and the most common AC/DC supplies

Typical dimensions

Model CBS-SC2000Integrated calibration system for electronic and pneumatic instrumentation

Typical applications are the calibration and testing of pneumatic and electronic industrial instrumentation against pressure primary standards traceable to national standards.

System CBS-SC2000 is the heart of a well-organised central instrument workshop.

The systems CBS-SC2000 can be used for a wide range of applications. Using the quick fit connectors and external connections, the operator can set up a large variety of pneumatic and electrical circuits.

5

System description

Model CBS-SC4000Integrated temperature test and calibration bench

The CBS-SC4000 ensures the exhaustive testing and verification capabilities to almost any type of temperature measuring instrument, regardless of their principle of operations: mechanical, pneumatic or electronic.

Typical applications are the testing and calibration of temperature measuring instruments such as: mercury thermometers, thermocouples, NTC/PTC, thermistors, Resistance Temperature Detectors (RTD), thermostats,

pneumatic and electronic transmitters, temperature controllers and temperature recorders.

System CBS-SC4000 allows calibration procedures tobe carried out by using the comparison method, as mostdemanding international standards require.

For complete specifications, please refer to data sheet CT 92.33.

Main features

■ Calibration of temperature instruments by comparison with the reference thermometers supplied with each bath

■ The systems can be based on 1, 2, 3 and 4 baths ■ Temperature ranges from – 40 ... +600 °C

System CBS-SC4000-1Single bath / (W x D x H) 550 x 420 x 960 mmSystem CBS-SC4000-2Two baths / (W x D x H) 1,150 x 850 x 1,260 mmSystem CBS-SC4000-3Three baths / (W x D x H) 1,800 x 850 x 1,260 mmSystem CBS-SC4000-4Four baths / (W x D x H) 2,400 x 850 x 1,260 mm

Typical dimensions

6

The CBS-SC5000 is suitable to check electric/electronic instruments and devices, providing the operator with a wide variety of AC and DC supplies and facilities to enable accurate measurements of the most common electric parameters.

Width 554 mmDepth 450 mmHeight 711 mm

Main features

■ 19" modular construction for table operation; modules may be joined (or splitted) at any time with minor modifications.

■ Aluminium structure with painted steel plates on sides, top and rear; front panels are made of anodised aluminium with engraved mimics.

■ Air set for cleaning purposes, including pressure reducer, gauge and flexible hose with air jet.

Typical dimensions

Model CBS-SC5000Integrated calibration system for electric instrumentation

Instruments checked with system CBS-SC5000 includeDC-powered electronic transmitters/converters, AC-powered controllers, recorders and AC / DC instruments like pressure and temperature switches, solenoid valves, relays, etc.

For complete specifications, please refer to data sheet CT 92.34.

7

System description

Model CBS-SC9000Integrated temperature test and calibration bench

The CBS-SC9000 is a multi-purpose calibration station that features a single 19’’ table-top rack incorporating everything necessary to ensure the exhaustive calibration of a wide range of process instruments and sensors.

The CBS-SC9000 is very easy to use and shortensthe way and the time required to conform to the user’s calibrationprocedures to ISO 9000.

Its exclusive redundancy of operations with PASCAL calibrators, the Scandura’s multi-function calibrator, remains unique, allowing a real integration between lab and field calibration under identical quality procedures and calibration formats.

For complete specifications, please refer to data sheet CT 92.35.

Main features

■ 19" modular construction for table operation ■ Aluminium structure with painted steel plates on sides, top

and rear; front panels are made of anodised aluminium with engraved mimics

■ Digital measurement and simulation/generation of: pressure, vacuum, voltage, current, frequency, resistance/RTDs, thermocouples, switch status test

Typical dimensions

Width 553 mmDepth 500 mmHeight 766.5 mm

8

Model CBM-SC3000Modular laboratory test systems

The CBM-SC3000 is a modular calibration solution for industrial instrumentation to suit any user requirement by means of different modules designed for pressure, vacuum, temperature, electrical signals, auxiliary supplies, etc.

Each module is independent and enables the measurement, generation, distribution and control of different variables.

Their combination allows to build up a customised calibration solution, opened for expansion whenever needed.

Main features

■ Bench worktable complete with holder console in two basic configurations, straight and corner version, with or without holder console

■ 19" modular construction for table operation ■ Full range of accessories available for easy operation

The CBM-SC3000 is available as bench worktable complete with holder console mounted across the rear of the worktable, to allow a total use of the working area.

Holder console is available for housing the modules up to 6 units.

For complete specifications, please refer to data sheet CT 92.36.

Precision pressure indicatorModel CPG2500see data sheet CT 25.02

AC resistance thermometry bridgeModel CTR6500see data sheet CT 60.40

Dead-weight testerModel CPB5800see data sheet CT 31.11

Temperature dry-well calibratorModel CTD9300see data sheet CT 41.38

9

System description

Modular modules

Pneumatic utilities

DC supply electrical utilities

Main power supply and AC power sockets The AC power sockets module has been designed to accommodate the single-phase power supply mains switch of the bench complete with a differential earth leakage relay and to distribute a single-phase AC power supply to theinstruments.

The pneumatic module model is designed to generate pressure/vacuum signals for calibration and testing instruments.

It combines a manual pressure and vacuum generator, regulated air pressure outputs from external source with 3 preset pressure steps and an electric vacuum pump.

One of the modules is also equipped with two plug-in connections for each pressure output complete with built-in shut-off valves.

The variable DC power supply module is a configurable module according to with customer specification and application. Various solutions can be offered, from 1 to 2, 3 or more output channels, with flexible output voltage/current ratings combination.

10

Electrical and electronic

Temperature and electrics

Multifunction pressure / temperature electrical signal

This module is designed for measuring reference signals from thermocouples to test and calibrate temperature sensors and instruments. The module includes high-accuracy reference instrument, the 8-channel multiplexer provides for the scanning of up to 7 sensors to be tested, terminal board and power switch with lamp.

This module is designed for measuring reference signals from resistance thermometers to test and calibrate temperature sensors and instruments.The module includes a high-accuracy reference instrument, the 8-channel multiplexer provides for the scanning of up to 7 sensors to be tested,terminal board and power switch with lamp.

Scandura’s multi-function, multi-variable calibrator allows a real integration between lab and field calibration under identical quality procedures and calibration formats. The user interface is represented bya wide LC display with touchscreen through which it is possible to set up the instrument in total.

The configuration procedure is very simple. The touchscreen can also be used with hand gloves and in case of dirt you can easily clean it witha cloth or a sponge and lock it to avoid unintentional pressing of keys during the measurement process.

A variety of measuring equipment can be included in the test bench to suit thecustomer needs and requests such as:

■ Digital multimeters ■ Function generators ■ Oscilloscopes ■ LCR meters etc…

The selection of the suitable instrument for the application, will be made accordingly to the customer specification and it will be integrated into the calibration systems.

11

Assistance from the very beginning

WIKA / Scandura is your competent partner through all phases of the project: starting with planning the basic and detail engineering through the bench construction to the after-sales assistance.

Perfect logistics

Whether wooden cases or pallets, container shipment or sea-freight packaging, we will meet your delivery expectations. Our efficient distribution system is supported by both our subsidiaries and representative offices around the world. So you can be sure that the delivery will always arrive at the agreed time and at the agreed place.

Technical inspection

We offer our customers the possibility for acceptance tests and training on benches to be performed in our facilities prior to dispatch. You can therefore also count on the fact that all instruments will arrive at the installation site in perfect condition.

Extensive documentation

Specifically for your bench, we will prepare a complete book with dimensional drawings, data sheets, operating instructions and certificates in several languages, in digital and printed form.

Service in detail

Service in detail

WIKA Italia Srl & C. SasVia G. Marconi, 8 - 20010 Arese (MI)Tel. 02-93861.1 - Fax. 02-93861.74E-Mail: info@wika.it - www.wika.it

10/2019 - GB